Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756663AbZFOX1V (ORCPT ); Mon, 15 Jun 2009 19:27:21 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751426AbZFOX1N (ORCPT ); Mon, 15 Jun 2009 19:27:13 -0400 Received: from bar.sig21.net ([80.81.252.164]:33037 "EHLO bar.sig21.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751274AbZFOX1M (ORCPT ); Mon, 15 Jun 2009 19:27:12 -0400 Date: Tue, 16 Jun 2009 01:27:09 +0200 From: Johannes Stezenbach To: linux-kernel@vger.kernel.org Cc: Andrew Morton , Dave Jones , Pavel Machek , "Rafael J. Wysocki" Subject: 2.6.30: hibernation/swsusp lockup due to acpi-cpufreq Message-ID: <20090615232709.GA6059@sig21.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.19 (2009-01-05) X-Spam-21-Score: -3.5 (---) X-Spam-21-Report: No, score=-3.5 required=5.0 tests=ALL_TRUSTED=-1.8,AWL=0.881,BAYES_00=-2.599 autolearn=no Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31983 Lines: 671 Hi, on my aging Thinkpad T42p resume from hibernation fails in 2.6.30. There is a backtrace on suspend prior to writing out the disk image, but I cannot capture it due to lack of a serial port on the T42p. On resume the machine is dead after reading the image from disk. I've bisected this to: commit 01599fca6758d2cd133e78f87426fc851c9ea725 Author: Andrew Morton Date: Mon Apr 13 10:27:49 2009 -0700 cpufreq: use smp_call_function_[single|many]() in acpi-cpufreq.c I see in git log that this commit is known broken, but the resume on my machine is still broken in 2.6.30. If I disable CONFIG_X86_ACPI_CPUFREQ suspend/resume works in 2.6.30. I include lspci and dmesg below. Johannes 00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc M10 NT [FireGL Mobility T2] (rev 80) 02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01) 02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01) 02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03) 02:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01) Linux version 2.6.30 (root@void) (gcc version 4.3.3 (Debian 4.3.3-11) ) #3 PREEMPT Tue Jun 16 00:17:11 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data) BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x3ff60 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DBFFF uncachable DC000-DFFFF write-back E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 03FF80000 mask FFFF80000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. Warning only 895MB will be used. Use a HIGHMEM enabled kernel. init_memory_mapping: 0000000000000000-0000000037fa8000 0000000000 - 0000400000 page 4k 0000400000 - 0037c00000 page 2M 0037c00000 - 0037fa8000 page 4k kernel direct mapping tables up to 37fa8000 @ 7000-c000 RAMDISK: 37c44000 - 37fefe13 Allocated new RAMDISK: 00653000 - 009fee13 Move RAMDISK from 0000000037c44000 - 0000000037fefe12 to 00653000 - 009fee12 ACPI: RSDP 000f6d70 00024 (v02 IBM ) ACPI: XSDT 3ff6a672 0004C (v01 IBM TP-1R 00003230 LTP 00000000) ACPI: FACP 3ff6a700 000F4 (v03 IBM TP-1R 00003230 IBM 00000001) ACPI Warning (tbfadt-0531): 32/64X length mismatch in Gpe1Block: 0/32 [20090320] ACPI Warning (tbfadt-0562): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20090320] ACPI: DSDT 3ff6a8e7 0C530 (v01 IBM TP-1R 00003230 MSFT 0100000E) ACPI: FACS 3ff78000 00040 ACPI: SSDT 3ff6a8b4 00033 (v01 IBM TP-1R 00003230 MSFT 0100000E) ACPI: ECDT 3ff76e17 00052 (v01 IBM TP-1R 00003230 IBM 00000001) ACPI: TCPA 3ff76e69 00032 (v01 IBM TP-1R 00003230 PTL 00000001) ACPI: BOOT 3ff76fd8 00028 (v01 IBM TP-1R 00003230 LTP 00000001) 895MB LOWMEM available. mapped low ram: 0 - 37fa8000 low ram: 0 - 37fa8000 node 0 low ram: 00000000 - 37fa8000 node 0 bootmap 00008000 - 0000eff8 (7 early reservations) ==> bootmem [0000000000 - 0037fa8000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 000064f098] TEXT DATA BSS ==> [0000100000 - 000064f098] #2 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #3 [0000650000 - 0000652128] BRK ==> [0000650000 - 0000652128] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #5 [0000653000 - 00009fee13] NEW RAMDISK ==> [0000653000 - 00009fee13] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00037fa8 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00037fa8 On node 0 totalpages: 229191 free_area_init_node: node 0, pgdat c0590410, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223432 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 Local APIC disabled by BIOS -- you can enable it with "lapic" nr_irqs_gsi: 16 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227399 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:288 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1794.244 MHz processor. Console: colour VGA+ 80x34 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 899432k/917152k available (3160k kernel code, 17272k reserved, 1552k data, 296k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) vmalloc : 0xf87a8000 - 0xfffa8000 ( 120 MB) lowmem : 0xc0000000 - 0xf7fa8000 ( 895 MB) .init : 0xc059e000 - 0xc05e8000 ( 296 kB) .data : 0xc041619f - 0xc059a2bc (1552 kB) .text : 0xc0100000 - 0xc041619f (3160 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 3588.48 BogoMIPS (lpj=17942440) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.80GHz stepping 06 Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ACPI: setting ELCR to 0200 (from 0800) net_namespace: 720 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PUBS] (on) ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.1: reg 10 32bit mmio: [0xb1000000-0xb1000fff] pci 0000:02:00.1: supports D1 D2 pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.1: PME# disabled pci 0000:02:01.0: reg 10 32bit mmio: [0xc0240000-0xc025ffff] pci 0000:02:01.0: reg 14 32bit mmio: [0xc0200000-0xc020ffff] pci 0000:02:01.0: reg 18 io port: [0x8000-0x803f] pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:02.0: reg 10 32bit mmio: [0xc0210000-0xc021ffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff could not be reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x3fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x162f has been reserved system 00:02: ioport range 0x1632-0x167f has been reserved system 00:02: ioport range 0x1630-0x1631 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x3000-0x3fff pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:00.0: IO window: 0x004000-0x0040ff pci 0000:02:00.0: IO window: 0x004400-0x0044ff pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07 pci 0000:02:00.1: IO window: 0x004800-0x0048ff pci 0000:02:00.1: IO window: 0x004c00-0x004cff pci 0000:02:00.1: PREFETCH window: 0xec000000-0xefffffff pci 0000:02:00.1: MEM window: 0xc8000000-0xcbffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x4000-0x8fff pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff pci 0000:00:1e.0: PREFETCH window: 0x000000e8000000-0x000000efffffff pci 0000:00:1e.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] pci_bus 0000:02: resource 0 io: [0x4000-0x8fff] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff] pci_bus 0000:02: resource 2 pref mem [0xe8000000-0xefffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff] pci_bus 0000:03: resource 2 pref mem [0xe8000000-0xebffffff] pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff] pci_bus 0000:07: resource 2 pref mem [0xec000000-0xefffffff] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 3759k freed Simple Boot Flag at 0x35 set to 0x1 cpu0(1) debug files 55 squashfs: version 4.0 (2009/01/31) Phillip Lougher Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.11) msgmni has been set to 1764 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device radeonfb 0000:01:00.0: power state changed by ACPI to D0 radeonfb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=320.00 Mhz, System=202.00 MHz radeonfb: PLL min 20000 max 35000 i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. Switched to high resolution mode on CPU 0 i2c-adapter i2c-1: unable to read EDID block. Non-DDC laptop panel detected i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: 1600x1200 radeonfb: detected LVDS panel size from BIOS: 1600x1200 radeondb: BIOS provided dividers will be used radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 200x75 radeonfb (0000:01:00.0): ATI Radeon 4e54 "NT" power_supply AC: uevent power_supply AC: No power supply yet power_supply AC: power_supply_changed ACPI: AC Adapter [AC] (on-line) power_supply AC: power_supply_changed_work power_supply AC: power_supply_update_gen_leds 1 power_supply AC: uevent power_supply AC: POWER_SUPPLY_NAME=AC power_supply AC: Static prop TYPE=Mains power_supply AC: 1 dynamic props power_supply AC: prop ONLINE=1 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (50 C) power_supply BAT0: uevent power_supply BAT0: No power supply yet power_supply BAT0: power_supply_changed power_supply BAT0: power_supply_changed_work ACPI: Battery Slot [BAT0] (battery present) power_supply BAT0: power_supply_update_bat_leds 4 power_supply BAT0: uevent power_supply BAT0: POWER_SUPPLY_NAME=BAT0 power_supply BAT0: Static prop TYPE=Battery power_supply BAT0: 13 dynamic props power_supply BAT0: prop STATUS=Full power_supply BAT0: prop PRESENT=1 power_supply BAT0: prop TECHNOLOGY=Li-ion power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 power_supply BAT0: prop VOLTAGE_NOW=12390000 power_supply BAT0: prop CURRENT_NOW=0 power_supply BAT0: prop POWER_NOW=0 power_supply BAT0: prop ENERGY_FULL_DESIGN=71280000 power_supply BAT0: prop ENERGY_FULL=48970000 power_supply BAT0: prop ENERGY_NOW=48970000 power_supply BAT0: prop MODEL_NAME=IBM-93P5003 power_supply BAT0: prop MANUFACTURER=SONY power_supply BAT0: prop SERIAL_NUMBER= 1416 Real Time Clock Driver v1.12b Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855PM Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial 00:09: activated 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 serial 0000:00:1f.6: PCI INT B disabled loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x01) pci 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867 ide1: BM-DMA at 0x1868-0x186f Probing IDE interface ide0... hda: HTS726060M9AT00, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: UJDA765 DVD/CDRW, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 128KiB hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 ide-cd driver 5.00 ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64 yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x04f8, PCI irq 11 yenta_cardbus 0000:02:00.0: Socket status: 30000086 yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0552] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21b22, devctl 0x64 yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x04f8, PCI irq 11 yenta_cardbus 0000:02:00.1: Socket status: 30000086 yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-cypress PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby input: ThinkPad Extra Buttons as /devices/virtual/input/input5 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (14330 buckets, 57320 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Using IPI Shortcut mode Clocksource tsc unstable (delta = -116160907 ns) Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 registered taskstats version 1 Freeing unused kernel memory: 296k freed power_supply AC: uevent power_supply AC: POWER_SUPPLY_NAME=AC power_supply AC: Static prop TYPE=Mains power_supply AC: 1 dynamic props power_supply AC: prop ONLINE=1 power_supply BAT0: uevent power_supply BAT0: POWER_SUPPLY_NAME=BAT0 power_supply BAT0: Static prop TYPE=Battery power_supply BAT0: 13 dynamic props power_supply BAT0: prop STATUS=Full power_supply BAT0: prop PRESENT=1 power_supply BAT0: prop TECHNOLOGY=Li-ion power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 power_supply BAT0: prop VOLTAGE_NOW=12390000 power_supply BAT0: prop CURRENT_NOW=0 power_supply BAT0: prop POWER_NOW=0 power_supply BAT0: prop ENERGY_FULL_DESIGN=71280000 power_supply BAT0: prop ENERGY_FULL=48970000 power_supply BAT0: prop ENERGY_NOW=48970000 power_supply BAT0: prop MODEL_NAME=IBM-93P5003 power_supply BAT0: prop MANUFACTURER=SONY power_supply BAT0: prop SERIAL_NUMBER= 1416 uhci_hcd: USB Universal Host Controller Interface driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 PM: Starting manual resume from disk EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. udev: starting version 141 power_supply AC: uevent power_supply AC: POWER_SUPPLY_NAME=AC power_supply AC: Static prop TYPE=Mains power_supply AC: 1 dynamic props power_supply AC: prop ONLINE=1 power_supply BAT0: uevent power_supply BAT0: POWER_SUPPLY_NAME=BAT0 power_supply BAT0: Static prop TYPE=Battery power_supply BAT0: 13 dynamic props power_supply BAT0: prop STATUS=Full power_supply BAT0: prop PRESENT=1 power_supply BAT0: prop TECHNOLOGY=Li-ion power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 power_supply BAT0: prop VOLTAGE_NOW=12390000 power_supply BAT0: prop CURRENT_NOW=0 power_supply BAT0: prop POWER_NOW=0 power_supply BAT0: prop ENERGY_FULL_DESIGN=71280000 power_supply BAT0: prop ENERGY_FULL=48970000 power_supply BAT0: prop ENERGY_NOW=48970000 power_supply BAT0: prop MODEL_NAME=IBM-93P5003 power_supply BAT0: prop MANUFACTURER=SONY power_supply BAT0: prop SERIAL_NUMBER= 1416 cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US ath5k 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ath5k 0000:02:02.0: registered as 'phy0' phy0: Selected rate control algorithm 'minstrel' Registered led device: ath5k-phy0::rx Registered led device: ath5k-phy0::tx ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) ath5k phy0: RF5112B multiband radio found (0x36) Adding 1048568k swap on /dev/mapper/vg0-cswap. Priority:-1 extents:1 across:1048568k EXT3 FS on dm-2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with writeback data mode. Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast agpgart-intel 0000:00:00.0: AGP 2.0 bridge agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode radeonfb 0000:01:00.0: putting AGP V2 device into 2x mode [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 2 usecs nfsd: last server has exited, flushing export cache e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/