Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760118AbZFQSfD (ORCPT ); Wed, 17 Jun 2009 14:35:03 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1760056AbZFQSev (ORCPT ); Wed, 17 Jun 2009 14:34:51 -0400 Received: from mx.treblig.org ([80.68.94.177]:52516 "EHLO mx.treblig.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758627AbZFQSes (ORCPT ); Wed, 17 Jun 2009 14:34:48 -0400 Date: Wed, 17 Jun 2009 20:34:42 +0100 From: "Dr. David Alan Gilbert" To: Jiri Kosina Cc: "H. Peter Anvin" , linux-kernel@vger.kernel.org, Dmitry Torokhov , linux-input@vger.kernel.org Subject: Re: 2.6.{28,30} Keyboard not working on oldish machine Message-ID: <20090617193442.GA31944@gallifrey> References: <20090613230842.GA18347@gallifrey> <4A349B67.1070603@zytor.com> <20090614122734.GA1499@gallifrey> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: X-Chocolate: 70 percent or better cocoa solids preferably X-Operating-System: Linux/2.6.29.2-bytemark-kvm-tickless-2009-05-05 (i686) X-Uptime: 20:28:33 up 22 days, 12:50, 2 users, load average: 0.06, 0.04, 0.01 User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23654 Lines: 390 * Jiri Kosina (jkosina@suse.cz) wrote: > On Sun, 14 Jun 2009, Dr. David Alan Gilbert wrote: > > > > > [ 3.147416] PNP: No PS/2 controller found. Probing ports directly. > > > > [ 3.174456] serio: i8042 KBD port at 0x60,0x64 irq 1 > > > > [ 3.174961] serio: i8042 AUX port at 0x60,0x64 irq 12 > > > > [ 3.186312] mice: PS/2 mouse device common for all mice > > > It does, correctly, identify the keyboard and mode port, so it's > > > somewhat odd that it doesn't get used... > > Indeed. The only other observation in the older kernel that works > > it detects the AUX port first. > > Booting with 'i8042.debug' will spit some more output into dmesg, which > might help us to see if i8042 is really properly initialized, or something > strange is going on during initialization. Please find below the new dmesg created by appending i8042.debug; this was taken from a slightly newer build of the same source kernel that I reported; this build just had a few more things configured out (parallel port) but exhibits the same symptom. No more debug is generated as I press any keys. Dave [ 0.000000] Linux version 2.6.30-gort1 (dg@davros) (gcc version 4.4.0 (Ubuntu 4.4.0-5ubuntu1) ) #7 Sun Jun 14 17:36:35 BST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-88: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-88: 0000000000100000 - 0000000004000000 (usable) [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x4000 max_arch_pfn = 0x100000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 0000000000100000 - 0000000004000000 (usable) [ 0.000000] init_memory_mapping: 0000000000000000-0000000004000000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0004000000 page 2M [ 0.000000] kernel direct mapping tables up to 4000000 @ 10000-14000 [ 0.000000] 64MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 04000000 [ 0.000000] low ram: 0 - 04000000 [ 0.000000] node 0 low ram: 00000000 - 04000000 [ 0.000000] node 0 bootmap 00010000 - 00010800 [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 0004000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000200000 - 00005ffd74] TEXT DATA BSS ==> [0000200000 - 00005ffd74] [ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #3 [0000600000 - 0000602000] BRK ==> [0000600000 - 0000602000] [ 0.000000] #4 [0000010000 - 0000011000] BOOTMAP ==> [0000010000 - 0000011000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00004000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00004000 [ 0.000000] On node 0 totalpages: 16272 [ 0.000000] free_area_init_node: node 0, pgdat c0569a04, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 96 pages used for memmap [ 0.000000] Normal zone: 12192 pages, LIFO batch:1 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 4000000:fc000000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16144 [ 0.000000] Kernel command line: root=/dev/hda3 ro i8042.debug [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:16 [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 90.205 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.004000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.004000] Memory: 60392k/65536k available (2438k kernel code, 4672k reserved, 1115k data, 212k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfffeb000 - 0xfffff000 ( 80 kB) [ 0.004000] vmalloc : 0xc4800000 - 0xfffe9000 ( 951 MB) [ 0.004000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) [ 0.004000] .init : 0xc057c000 - 0xc05b1000 ( 212 kB) [ 0.004000] .data : 0xc04618c0 - 0xc05787cc (1115 kB) [ 0.004000] .text : 0xc0200000 - 0xc04618c0 (2438 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004099] Calibrating delay loop (skipped), value calculated using timer frequency.. 180.41 BogoMIPS (lpj=360820) [ 0.005240] Security Framework initialized [ 0.005637] SELinux: Disabled at boot. [ 0.006096] Mount-cache hash table entries: 512 [ 0.009925] Intel Pentium with F0 0F bug - workaround enabled. [ 0.010313] [ 0.010875] CPU: Intel Pentium 75 - 200 stepping 04 [ 0.011516] Checking 'hlt' instruction... OK. [ 0.032857] net_namespace: 560 bytes [ 0.040412] NET: Registered protocol family 16 [ 0.051348] PCI: PCI BIOS revision 2.00 entry at 0xf3940, last bus=0 [ 0.051754] PCI: Using configuration type 1 for base access [ 0.181104] bio: create slab at 0 [ 0.197557] PCI: Probing PCI hardware [ 0.197933] PCI: Probing PCI hardware (bus 00) [ 0.199725] PCI: Scanning bus 0000:00 [ 0.199964] pci 0000:00:00.0: found [8086:04a3] class 000600 header type 00 [ 0.200562] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x15f [ 0.200727] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2c [ 0.200993] pci 0000:00:01.0: found [1042:1000] class 000101 header type 00 [ 0.201140] pci 0000:00:01.0: reg 10 io port: [0x1f0-0x1f7] [ 0.201259] pci 0000:00:01.0: reg 14 io port: [0x3f4-0x3f7] [ 0.201492] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x15f [ 0.201741] pci 0000:00:02.0: found [8086:0484] class 000000 header type 00 [ 0.202018] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x15f [ 0.202164] pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x2c [ 0.202426] pci 0000:00:06.0: found [10ec:8139] class 000200 header type 00 [ 0.202572] pci 0000:00:06.0: reg 10 io port: [0xfc80-0xfcff] [ 0.202696] pci 0000:00:06.0: reg 14 32bit mmio: [0xffbfff80-0xffbfffff] [ 0.202925] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x15f [ 0.203212] pci 0000:00:0c.0: found [8086:1229] class 000200 header type 00 [ 0.203381] pci 0000:00:0c.0: reg 10 32bit mmio: [0xffbef000-0xffbeffff] [ 0.203507] pci 0000:00:0c.0: reg 14 io port: [0xfc40-0xfc7f] [ 0.203629] pci 0000:00:0c.0: reg 18 32bit mmio: [0xffa00000-0xffafffff] [ 0.203787] pci 0000:00:0c.0: reg 30 32bit mmio: [0xfe000000-0xfe0fffff] [ 0.204176] pci 0000:00:0c.0: calling quirk_resource_alignment+0x0/0x15f [ 0.204328] pci 0000:00:0c.0: calling pci_fixup_transparent_bridge+0x0/0x2c [ 0.204469] pci 0000:00:0c.0: supports D1 D2 [ 0.204552] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot [ 0.204963] pci 0000:00:0c.0: PME# disabled [ 0.205476] pci 0000:00:0e.0: found [10b7:9200] class 000200 header type 00 [ 0.205639] pci 0000:00:0e.0: reg 10 io port: [0xf880-0xf8ff] [ 0.205764] pci 0000:00:0e.0: reg 14 32bit mmio: [0xffbdff80-0xffbdffff] [ 0.205932] pci 0000:00:0e.0: reg 30 32bit mmio: [0xfe000000-0xfe01ffff] [ 0.206116] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x15f [ 0.206257] pci 0000:00:0e.0: supports D1 D2 [ 0.206337] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.206733] pci 0000:00:0e.0: PME# disabled [ 0.207183] PCI: Fixups for bus 0000:00 [ 0.207269] PCI: Bus scan for 0000:00 returning with max=00 [ 0.225534] NetLabel: Initializing [ 0.225890] NetLabel: domain hash size = 128 [ 0.226213] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.226979] NetLabel: unlabeled traffic allowed by default [ 0.227791] Slow work thread pool: Starting up [ 0.229328] Slow work thread pool: Ready [ 0.229853] FS-Cache: Loaded [ 0.232330] CacheFiles: Loaded [ 0.250057] pci 0000:00:0e.0: BAR 6: got res [0x10000000-0x1001ffff] bus [0x10000000-0x1001ffff] flags 0x27200 [ 0.250212] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.250310] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.251078] NET: Registered protocol family 2 [ 0.253970] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.261776] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.262779] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.263454] TCP: Hash tables configured (established 2048 bind 2048) [ 0.263950] TCP reno registered [ 0.265914] NET: Registered protocol family 1 [ 0.274184] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.276349] Scanning for low memory corruption every 60 seconds [ 0.285314] audit: initializing netlink socket (disabled) [ 0.285920] type=2000 audit(1245262771.283:1): initialized [ 0.420817] NTFS driver 2.1.29 [Flags: R/O]. [ 0.429045] msgmni has been set to 117 [ 0.435408] alg: No test for cipher_null (cipher_null-generic) [ 0.436823] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 0.438080] alg: No test for digest_null (digest_null-generic) [ 0.439330] alg: No test for compress_null (compress_null-generic) [ 0.511551] alg: No test for stdrng (krng) [ 0.512927] alg: No test for stdrng (ansi_cprng) [ 0.513679] io scheduler noop registered [ 0.514028] io scheduler deadline registered (default) [ 0.514744] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.514892] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x21 [ 0.515046] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x31e [ 0.515192] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x93 [ 0.515352] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x21 [ 0.515496] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x31e [ 0.515633] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x93 [ 0.515804] pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.516155] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x21 [ 0.516312] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x31e [ 0.516454] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x93 [ 0.516618] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x21 [ 0.516764] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x31e [ 0.516900] pci 0000:00:06.0: calling pci_fixup_video+0x0/0x93 [ 0.517068] pci 0000:00:0c.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.517267] pci 0000:00:0c.0: Firmware left e100 interrupts enabled; disabling [ 0.517878] pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x21 [ 0.518033] pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0x31e [ 0.518169] pci 0000:00:0c.0: calling pci_fixup_video+0x0/0x93 [ 0.518330] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x21 [ 0.518477] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x31e [ 0.518615] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0x93 [ 0.519444] isapnp: Scanning for PnP cards... [ 0.876412] isapnp: No Plug & Play device found [ 1.008268] Non-volatile memory driver v1.3 [ 1.008675] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 1.009225] Hangcheck: Using get_cycles(). [ 1.009619] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.012838] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.015305] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.017964] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 1.020719] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A [ 1.030480] Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M [ 1.052161] FDC 0 is a post-1991 82077 [ 1.095677] loop: module loaded [ 1.096161] Uniform Multi-Platform E-IDE driver [ 1.099667] 0000:00:01.0: disabled chipset read-ahead (buggy RZ1000/RZ1001) [ 1.100486] rz1000 0000:00:01.0: IDE controller (0x1042:0x1000 rev 0x01) [ 1.101290] rz1000 0000:00:01.0: not 100% native mode: will probe irqs later [ 1.101734] Probing IDE interface ide0... [ 1.388107] hda: IBM-DCAA-33610, ATA DISK drive [ 1.891960] hdb: GCD-R542B, ATAPI CD/DVD-ROM drive [ 1.894219] Probing IDE interface ide1... [ 2.462073] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.463108] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.469639] ide-gd driver 1.18 [ 2.470490] hda: max request size: 128KiB [ 2.470864] hda: 7056000 sectors (3612 MB) w/96KiB Cache, CHS=7000/16/63 [ 2.471457] hda: cache flushes not supported [ 2.472848] hda: hda1 hda2 < hda5 > hda3 [ 2.534310] ide-cd driver 5.00 [ 2.540393] ide-cd: hdb: ATAPI 4X CD-ROM drive, 256kB Cache [ 2.541124] Uniform CD-ROM driver Revision: 3.20 [ 2.559879] 3c59x: Donald Becker and others. [ 2.560505] 0000:00:0e.0: 3Com PCI 3c905C Tornado at c48f0f80. [ 2.593634] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.594041] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.622291] e100 0000:00:0c.0: PME# disabled [ 2.630832] e100: eth1: e100_probe: addr 0xffbef000, irq 11, MAC addr 00:d0:b7:bf:81:57 [ 2.685854] Fixed MDIO Bus: probed [ 2.720326] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.720775] 8139cp 0000:00:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.723122] 8139too Fast Ethernet driver 0.9.28 [ 2.734478] eth2: RealTek RTL8139 at 0xfc80, 00:20:18:88:7a:c1, IRQ 11 [ 2.734892] eth2: Identified 8139 chip type 'RTL-8139 rev K' [ 2.736643] tun: Universal TUN/TAP device driver, 1.6 [ 2.737011] tun: (C) 1999-2004 Max Krasnyansky [ 2.739153] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 2.741330] winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 2.741406] http://www.scyld.com/network/drivers.html [ 2.748664] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 2.756565] PNP: No PS/2 controller found. Probing ports directly. [ 2.760232] drivers/input/serio/i8042.c: 20 -> i8042 (command) [3] [ 2.760496] drivers/input/serio/i8042.c: 65 <- i8042 (return) [3] [ 2.760586] drivers/input/serio/i8042.c: 60 -> i8042 (command) [3] [ 2.760725] drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [3] [ 2.760821] drivers/input/serio/i8042.c: d3 -> i8042 (command) [3] [ 2.760960] drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [3] [ 2.763945] drivers/input/serio/i8042.c: fe <- i8042 (return) [3] [ 2.772060] drivers/input/serio/i8042.c: a9 -> i8042 (command) [5] [ 2.772360] drivers/input/serio/i8042.c: 00 <- i8042 (return) [5] [ 2.772449] drivers/input/serio/i8042.c: a7 -> i8042 (command) [5] [ 2.772588] drivers/input/serio/i8042.c: 20 -> i8042 (command) [5] [ 2.772781] drivers/input/serio/i8042.c: 74 <- i8042 (return) [5] [ 2.772870] drivers/input/serio/i8042.c: a8 -> i8042 (command) [5] [ 2.773008] drivers/input/serio/i8042.c: 20 -> i8042 (command) [5] [ 2.773252] drivers/input/serio/i8042.c: 54 <- i8042 (return) [5] [ 2.773340] drivers/input/serio/i8042.c: 60 -> i8042 (command) [5] [ 2.773478] drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [5] [ 2.773572] drivers/input/serio/i8042.c: d3 -> i8042 (command) [5] [ 2.773712] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [5] [ 2.775932] drivers/input/serio/i8042.c: fe <- i8042 (return) [5] [ 2.784650] drivers/input/serio/i8042.c: Interrupt 12, without any data [6] [ 2.784760] drivers/input/serio/i8042.c: 60 -> i8042 (command) [6] [ 2.784901] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [6] [ 2.785140] drivers/input/serio/i8042.c: Interrupt 1, without any data [6] [ 2.785247] drivers/input/serio/i8042.c: 60 -> i8042 (command) [6] [ 2.785387] drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [6] [ 2.785485] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.785964] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.795217] mice: PS/2 mouse device common for all mice [ 2.798180] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [9] [ 2.800486] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [10] [ 2.801590] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [10] [ 2.802961] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [10] [ 2.803174] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [10] [ 2.803363] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 2.805812] evbug.c: Connected device: input0 (PC Speaker at isa0061/input0) [ 2.805957] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [11] [ 2.806619] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [11] [ 2.808965] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [12] [ 2.809244] drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [12] [ 2.812079] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [13] [ 2.812302] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [13] [ 2.812676] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 2.813249] rtc0: alarms up to one day, 114 bytes nvram [ 2.814610] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [13] [ 2.814817] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [13] [ 2.817615] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [14] [ 2.823470] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.827716] evbug.c: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 2.828278] drivers/input/serio/i8042.c: d4 -> i8042 (command) [17] [ 2.828427] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [17] [ 2.840965] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 2.845245] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 2.850682] NET: Registered protocol family 26 [ 2.851071] GACT probability on [ 2.851380] Mirror/redirect action on [ 2.851709] Simple TC action Loaded [ 2.863147] netem: version 1.2 [ 2.863493] u32 classifier [ 2.863789] Actions configured [ 2.864255] Netfilter messages via NETLINK v0.30. [ 2.869464] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 2.876510] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 2.877063] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 2.877592] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 2.884726] ctnetlink v0.93: registering with nfnetlink. [ 2.885367] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 2.885767] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 2.886906] xt_time: kernel timezone is -0000 [ 2.890338] IPVS: Registered protocols (TCP, UDP, AH, ESP) [ 2.891202] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 2.893194] IPVS: ipvs loaded. [ 2.893530] IPVS: [rr] scheduler registered. [ 2.893866] IPVS: [wrr] scheduler registered. [ 2.894209] IPVS: [lc] scheduler registered. [ 2.894553] IPVS: [wlc] scheduler registered. [ 2.895386] IPVS: [lblc] scheduler registered. [ 2.896354] IPVS: [lblcr] scheduler registered. [ 2.896716] IPVS: [dh] scheduler registered. [ 2.897055] IPVS: [sh] scheduler registered. [ 2.897402] IPVS: [sed] scheduler registered. [ 2.897749] IPVS: [nq] scheduler registered. [ 2.898131] IPVS: ftp: loaded support on port[0] = 21 [ 2.917272] IPv4 over IPv4 tunneling driver [ 2.947270] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.948510] ClusterIP Version 0.8 loaded successfully [ 2.949484] arp_tables: (C) 2002 David S. Miller [ 2.950860] TCP bic registered [ 2.951197] TCP cubic registered [ 2.951516] TCP westwood registered [ 2.951836] TCP highspeed registered [ 2.952299] TCP hybla registered [ 2.952620] TCP htcp registered [ 2.952936] TCP vegas registered [ 2.953256] TCP veno registered [ 2.953572] TCP scalable registered [ 2.953895] TCP lp registered [ 2.954205] TCP yeah registered [ 2.954522] TCP illinois registered [ 2.954857] NET: Registered protocol family 17 [ 2.957328] Bridge firewalling registered [ 2.957755] Ebtables v2.0 registered [ 2.959008] ebt_ulog: out of memory trying to call netlink_kernel_create [ 2.963284] NET: Registered protocol family 33 [ 2.965725] SCTP: Hash tables configured (established 2048 bind 4096) [ 2.982716] rtc_cmos rtc_cmos: setting system clock to 2009-06-17 18:19:35 UTC (1245262775) [ 3.028101] drivers/input/serio/i8042.c: d4 -> i8042 (command) [67] [ 3.028250] drivers/input/serio/i8042.c: ed -> i8042 (parameter) [67] [ 3.266898] EXT3-fs: INFO: recovery required on readonly filesystem. [ 3.267305] EXT3-fs: write access will be enabled during recovery. [ 6.765561] kjournald starting. Commit interval 5 seconds [ 6.766178] EXT3-fs: recovery complete. [ 6.771396] EXT3-fs: mounted filesystem with writeback data mode. [ 6.772006] VFS: Mounted root (ext3 filesystem) readonly on device 3:3. [ 6.773487] Freeing unused kernel memory: 212k freed [ 6.782893] Write protecting the kernel text: 2440k [ 6.783611] Write protecting the kernel read-only data: 884k [ 43.454091] Adding 176672k swap on /dev/hda5. Priority:-1 extents:1 across:176672k [ 44.914582] EXT3 FS on hda3, internal journal [ 53.155385] kjournald starting. Commit interval 5 seconds [ 53.157390] EXT3 FS on hda1, internal journal [ 53.157855] EXT3-fs: mounted filesystem with writeback data mode. [ 61.489031] e100 0000:00:0c.0: firmware: using built-in firmware e100/d101m_ucode.bin [ 61.891578] eth0: link down [ 63.831440] e100: eth1 NIC Link is Up 100 Mbps Full Duplex [ 72.023477] eth2: setting full-duplex. [ 126.748847] warning: `ntpd' uses 32-bit capabilities (legacy support in use) -- -----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux on Alpha,68K| Happy \ \ gro.gilbert @ treblig.org | MIPS,x86,ARM,SPARC,PPC & HPPA | In Hex / \ _________________________|_____ http://www.treblig.org |_______/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/