Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754604AbZFXWEx (ORCPT ); Wed, 24 Jun 2009 18:04:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751663AbZFXWEp (ORCPT ); Wed, 24 Jun 2009 18:04:45 -0400 Received: from fmailhost01.isp.att.net ([204.127.217.101]:42206 "EHLO fmailhost01.isp.att.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751515AbZFXWEm (ORCPT ); Wed, 24 Jun 2009 18:04:42 -0400 X-Originating-IP: [65.28.94.183] Message-ID: <4A42A2FD.1060401@lwfinger.net> Date: Wed, 24 Jun 2009 17:04:45 -0500 From: Larry Finger User-Agent: Thunderbird 2.0.0.19 (X11/20081227) MIME-Version: 1.0 To: Yinghai Lu CC: Gary Hade , Thomas Gleixner , Jesse Barnes , Jaswinder Singh Rajput , LKML , Ingo Molnar , x86 maintainers , Len Brown , Linus Torvalds Subject: Re: Regression with commit f9cde5f in 2.6.30-gitX References: <1245845787.3093.3.camel@localhost.localdomain> <1245861219.3216.15.camel@localhost.localdomain> <20090624094411.08fc66e6@jbarnes-g45> <20090624175513.GE7239@us.ibm.com> <20090624112849.55b38fff@jbarnes-g45> <20090624194839.GG7239@us.ibm.com> <4A4286F8.9020501@lwfinger.net> <86802c440906241432l6d601f76sf2a413d6e19079e6@mail.gmail.com> <4A429DAA.3010303@lwfinger.net> <86802c440906241444g1aabcc5rb2d189dca0965e36@mail.gmail.com> In-Reply-To: <86802c440906241444g1aabcc5rb2d189dca0965e36@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33955 Lines: 757 Yinghai Lu wrote: > On Wed, Jun 24, 2009 at 2:42 PM, Larry Finger wrote: >> Yinghai Lu wrote: >>> please fix the whole boot log with debug. >>> >>> need to make sure how many HT chain in your system. >> Do you mean the output of dmesg? I'm not sure what you mean by "debug". >> > put debug in your boot line of grub.conf I hope this is what you wanted. =============================== Linux version 2.6.30-Linus-08503-g4e8a237-dirty (finger@larrylap) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #155 SMP Wed Jun 24 16:50:16 CDT 2009 Command line: root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK2546G_18C2P0KCT-part8 resume=/dev/disk/by-id/ata-TOSHIBA_MK2546GSX_18C2P0KCT-part5 splash=silent vga=0x317 debug KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bbf50000 (usable) BIOS-e820: 00000000bbf50000 - 00000000bbf65000 (ACPI data) BIOS-e820: 00000000bbf65000 - 00000000bbf66000 (ACPI NVS) BIOS-e820: 00000000bbf66000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. last_pfn = 0xbbf50 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-DBFFF uncachable DC000-DFFFF write-protect E0000-E3FFF uncachable E4000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009e000 (usable) modified: 000000000009e000 - 00000000000a0000 (reserved) modified: 00000000000d2000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000bbf50000 (usable) modified: 00000000bbf50000 - 00000000bbf65000 (ACPI data) modified: 00000000bbf65000 - 00000000bbf66000 (ACPI NVS) modified: 00000000bbf66000 - 00000000c0000000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000fff80000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bbf50000 0000000000 - 00bbe00000 page 2M 00bbe00000 - 00bbf50000 page 4k kernel direct mapping tables up to bbf50000 @ 8000-d000 RAMDISK: 37539000 - 37fef403 ACPI: RSDP 00000000000f80c0 00024 (v03 HPQOEM) ACPI: XSDT 00000000bbf5d343 0006C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) ACPI: FACP 00000000bbf64874 000F4 (v03 HPQOEM SLIC-MPC 06040000 PTL_ 000F4240) ACPI: DSDT 00000000bbf5d3af 074C5 (v01 HPQOEM SLIC-MPC 06040000 MSFT 03000000) ACPI: FACS 00000000bbf65fc0 00040 ACPI: SLIC 00000000bbf649dc 00176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001) ACPI: WDAT 00000000bbf64b52 00104 (v01 PTLTD WDATTBL 06040000 LTP 00000001) ACPI: SRAT 00000000bbf64c56 000A0 (v01 AMD HAMMER 06040000 AMD 00000001) ACPI: MCFG 00000000bbf64cf6 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) ACPI: HPET 00000000bbf64d32 00038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) ACPI: APIC 00000000bbf64d6a 00068 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) ACPI: BOOT 00000000bbf64dd2 00028 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) ACPI: SSDT 00000000bbf64dfa 00206 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-c0000000 NUMA: Allocated memnodemap from b000 - c840 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-00000000bbf50000 NODE_DATA [000000000000c840 - 000000000001183f] bootmap [0000000000012000 - 00000000000297ef] pages 18 (8 early reservations) ==> bootmem [0000000000 - 00bbf50000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000209ed60] TEXT DATA BSS ==> [0001000000 - 000209ed60] #3 [0037539000 - 0037fef403] RAMDISK ==> [0037539000 - 0037fef403] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] #5 [000209f000 - 000209f188] BRK ==> [000209f000 - 000209f188] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #7 [000000b000 - 000000c840] MEMNODEMAP ==> [000000b000 - 000000c840] found SMP MP-table at [ffff8800000f8090] f8090 [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880002600000-ffff8800067fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009e 0: 0x00000100 -> 0x000bbf50 On node 0 totalpages: 769769 DMA zone: 88 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3800 pages, LIFO batch:0 DMA32 zone: 16453 pages used for memmap DMA32 zone: 749323 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 24 pages at ffff8800020e4000, static data 69344 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 753123 Policy zone: DMA32 Kernel command line: root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK2546G_18C2P0KCT-part8 resume=/dev/disk/by-id/ata-TOSHIBA_MK2546GSX_18C2P0KCT-part5 splash=silent vga=0x317 debug PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 7000000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 2982916k/3079488k available (2417k kernel code, 412k absent, 96160k reserved, 1789k data, 540k init) NR_IRQS:4352 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2000.016 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 5695 kB per task-struct memory footprint: 1920 bytes hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.03 BogoMIPS (lpj=8000064) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 00bbf80000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) 64 X2 TL-60 stepping 02 lockdep: fixing up alternatives. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4000.38 BogoMIPS (lpj=8000763) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Turion(tm) 64 X2 TL-60 stepping 02 Brought up 2 CPUs Total of 2 processors activated (8000.41 BogoMIPS). System has AMD C1E enabled Switch to broadcast mode on CPU1 CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 Switch to broadcast mode on CPU0 NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, dfffffff] node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [c0000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e09fffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Enabling special treatment for EC from MSI. ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:01.3: reg 10 32bit mmio: [0xfc200000-0xfc27ffff] pci 0000:00:02.0: reg 10 32bit mmio: [0xfc486000-0xfc486fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xfc489000-0xfc4890ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: reg 10 32bit mmio: [0xfc487000-0xfc487fff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.1: reg 10 32bit mmio: [0xfc489400-0xfc4894ff] pci 0000:00:04.1: supports D1 D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.1: PME# disabled pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf] pci 0000:00:07.0: reg 10 32bit mmio: [0xfc480000-0xfc483fff] pci 0000:00:07.0: PME# supported from D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df] pci 0000:00:09.0: reg 24 32bit mmio: [0xfc484000-0xfc485fff] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfc488000-0xfc488fff] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfc489c00-0xfc489cff] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfc489800-0xfc48980f] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:12.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff] pci 0000:00:12.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:12.0: reg 1c 64bit mmio: [0xf0000000-0xf0ffffff] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:09.0: reg 10 32bit mmio: [0x000000-0x0007ff] pci 0000:01:09.0: supports D1 D2 pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:09.0: PME# disabled pci 0000:01:09.1: reg 10 32bit mmio: [0xfc100800-0xfc1008ff] pci 0000:01:09.1: supports D1 D2 pci 0000:01:09.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:09.1: PME# disabled pci 0000:01:09.2: reg 10 32bit mmio: [0xfc100c00-0xfc100cff] pci 0000:01:09.2: supports D1 D2 pci 0000:01:09.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:09.2: PME# disabled pci 0000:01:09.3: reg 10 32bit mmio: [0xfc101000-0xfc1010ff] pci 0000:01:09.3: supports D1 D2 pci 0000:01:09.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:09.3: PME# disabled pci 0000:01:09.4: reg 10 32bit mmio: [0xfc101400-0xfc1014ff] pci 0000:01:09.4: supports D1 D2 pci 0000:01:09.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:09.4: PME# disabled pci 0000:00:08.0: transparent bridge pci 0000:00:08.0: bridge 32bit mmio: [0xfc100000-0xfc1fffff] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff] pci 0000:00:0c.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] pci 0000:04:00.0: reg 10 32bit mmio: [0xfc000000-0xfc003fff] pci 0000:04:00.0: supports D1 D2 pci 0000:00:0d.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff] PCI: Failed to allocate 0xd0000-0xd3fff from PCI mem for PCI Bus 0000:00 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK4E] (IRQs 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10 ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *5 ACPI: PCI Interrupt Link [Z012] (IRQs 16) *10 ACPI: PCI Interrupt Link [Z013] (IRQs 16) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11 PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:00: iomem range 0xfec80000-0xfec80fff has been reserved system 00:00: iomem range 0xfef00000-0xfef00fff has been reserved system 00:03: iomem range 0xe0000000-0xefffffff has been reserved system 00:04: ioport range 0x360-0x361 has been reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0x1000-0x107f has been reserved system 00:0b: ioport range 0x1080-0x10ff has been reserved system 00:0b: ioport range 0x1400-0x147f has been reserved system 00:0b: ioport range 0x1480-0x14ff has been reserved system 00:0b: ioport range 0x1800-0x187f has been reserved system 00:0b: ioport range 0x1880-0x18ff has been reserved pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 pci 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM window: 0xfc100000-0xfc1fffff pci 0000:00:08.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:06 pci 0000:00:0c.0: IO window: 0x4000-0x4fff pci 0000:00:0c.0: MEM window: 0xf8000000-0xfbffffff pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: 0xfc000000-0xfc0fffff pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:08.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xcf7] pci_bus 0000:00: resource 1 io: [0xd00-0xffff] pci_bus 0000:00: resource 2 mem: [0x0a0000-0x0bffff] pci_bus 0000:00: resource 3 mem: [0x0c0000-0x0c3fff] pci_bus 0000:00: resource 4 mem: [0x0c4000-0x0c7fff] pci_bus 0000:00: resource 5 mem: [0x0c8000-0x0cbfff] pci_bus 0000:00: resource 6 mem: [0x0cc000-0x0cffff] pci_bus 0000:00: resource 7 mem: [0x0d4000-0x0d7fff] pci_bus 0000:00: resource 8 mem: [0x0d8000-0x0dbfff] pci_bus 0000:00: resource 9 mem: [0x0dc000-0x0dffff] pci_bus 0000:00: resource 10 mem: [0x0e0000-0x0e3fff] pci_bus 0000:00: resource 11 mem: [0x0e4000-0x0e7fff] pci_bus 0000:00: resource 12 mem: [0x0e8000-0x0ebfff] pci_bus 0000:00: resource 13 mem: [0x0ec000-0x0effff] pci_bus 0000:00: resource 14 mem: [0x0f0000-0x0fffff] pci_bus 0000:00: resource 15 mem: [0xc0000000-0xfebfffff] pci_bus 0000:01: resource 1 mem: [0xfc100000-0xfc1fffff] pci_bus 0000:01: resource 3 io: [0x00-0xcf7] pci_bus 0000:01: resource 4 io: [0xd00-0xffff] pci_bus 0000:01: resource 5 mem: [0x0a0000-0x0bffff] pci_bus 0000:01: resource 6 mem: [0x0c0000-0x0c3fff] pci_bus 0000:01: resource 7 mem: [0x0c4000-0x0c7fff] pci_bus 0000:01: resource 8 mem: [0x0c8000-0x0cbfff] pci_bus 0000:01: resource 9 mem: [0x0cc000-0x0cffff] pci_bus 0000:01: resource 10 mem: [0x0d4000-0x0d7fff] pci_bus 0000:01: resource 11 mem: [0x0d8000-0x0dbfff] pci_bus 0000:01: resource 12 mem: [0x0dc000-0x0dffff] pci_bus 0000:01: resource 13 mem: [0x0e0000-0x0e3fff] pci_bus 0000:01: resource 14 mem: [0x0e4000-0x0e7fff] pci_bus 0000:01: resource 15 mem: [0x0e8000-0x0ebfff] pci_bus 0000:01: resource 16 mem: [0x0ec000-0x0effff] pci_bus 0000:01: resource 17 mem: [0x0f0000-0x0fffff] pci_bus 0000:01: resource 18 mem: [0xc0000000-0xfebfffff] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff] pci_bus 0000:06: resource 1 mem: [0xf8000000-0xfbffffff] pci_bus 0000:04: resource 1 mem: [0xfc000000-0xfc0fffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 10969k freed Simple Boot Flag at 0x36 set to 0x1 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1245862627.848:1): initialized msgmni has been set to 5847 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:12.0: Boot video device pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:0d.0: setting latency timer to 64 vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001d80000, using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Platform driver 'serial8250' needs updating - please use dev_pm_ops PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Platform driver 'i8042' needs updating - please use dev_pm_ops i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Platform driver 'pcspkr' needs updating - please use dev_pm_ops input: PC Speaker as /class/input/input0 rtc_cmos 00:07: RTC can wake from S4 rtc_cmos: dev (254:0) rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu registered taskstats version 1 rtc_cmos 00:07: setting system clock to 2009-06-24 16:57:08 UTC (1245862628) Freeing unused kernel memory: 540k freed ACPI: processor limited to max C-state 1 processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 input: AT Translated Set 2 keyboard as /class/input/input1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZS0] (75 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZS1] (76 C) SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:09.0: version 3.0 ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 ahci 0000:00:09.0: irq 26 for MSI/MSI-X ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio ahci 0000:00:09.0: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484100 irq 26 ata2: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484180 irq 26 ata3: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484200 irq 26 ata4: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484280 irq 26 input: PS/2 Mouse as /class/input/input2 input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: TOSHIBA MK2546GSX, LB014C, max UDMA/100 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 Uniform Multi-Platform E-IDE driver amd74xx 0000:00:06.0: UDMA133 controller amd74xx 0000:00:06.0: IDE controller (0x10de:0x0560 rev 0xa1) amd74xx 0000:00:06.0: IDE port disabled amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround. amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x30c0-0x30c7 Probing IDE interface ide0... hda: Optiarc DVD RW AD-7561A, ATAPI CD/DVD-ROM drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 17, io mem 0xfc489000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ACPI: PCI Interrupt Link [Z013] enabled at IRQ 16 ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z013] -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:04.1: setting latency timer to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:04.1: debug port 1 ehci_hcd 0000:00:04.1: cache line size of 64 is not supported ehci_hcd 0000:00:04.1: irq 16, io mem 0xfc489400 ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected uhci_hcd: USB Universal Host Controller Interface driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 17, io mem 0xfc486000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 5 ports detected ACPI: PCI Interrupt Link [Z012] enabled at IRQ 16 ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z012] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:04.0: setting latency timer to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:04.0: irq 16, io mem 0xfc487000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected udevd version 128 started usb 1-4: new high speed USB device using ehci_hcd and address 2 usb 1-4: configuration #1 chosen from 1 choice sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4 sd 0:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with writeback data mode. udevd version 128 started input: Power Button as /class/input/input4 ACPI: Power Button [PWRF] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [LID0] input: Sleep Button as /class/input/input6 ACPI: Sleep Button [SLPB] input: Power Button as /class/input/input7 ACPI: Power Button [PWRB] sd 0:0:0:0: Attached scsi generic sg0 type 0 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:0a.0: setting latency timer to 64 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:72:4c:a5:52 forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 21 b43-pci-bridge 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 21 (level, low) -> IRQ 21 b43-pci-bridge 0000:04:00.0: setting latency timer to 64 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) ssb: SPROM revision 2 detected. ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [ADP1] (on-line) cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20 HDA Intel 0000:00:07.0: setting latency timer to 64 cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) b43-phy0: Broadcom 4311 WLAN found (core revision 10) b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 phy0: Selected rate control algorithm 'minstrel' Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] udev: renamed network interface wlan0 to eth1 Adding 2104444k swap on /dev/sda5. Priority:-1 extents:1 across:2104444k device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com loop: module loaded EXT4-fs (sda1): barriers enabled kjournald2 starting: pid 2150, dev sda1:8, commit interval 5 seconds EXT4-fs (sda1): internal journal on sda1:8 EXT4-fs (sda1): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda1): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with writeback data mode. fuse init (API version 7.11) kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with writeback data mode. powernow-k8: Found 1 AMD Turion(tm) 64 X2 TL-60 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x11 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12 powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13 powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e Clocksource tsc unstable (delta = -68224792 ns) vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa039a480 vboxdrv: fAsync=1 offMin=0x10ec88 offMax=0x10ec88 vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 2.2.4 (interface 0x000a0009). VBoxNetFlt: dbg - g_abExecMemory=ffffffffa05381c0 RPC: Registered udp transport module. RPC: Registered tcp transport module. forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X eth0: no link during initialization. b43 ssb0:0: firmware: requesting b43/ucode5.fw b43 ssb0:0: firmware: requesting b43/pcm5.fw b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) b43-phy0 debug: Chip initialized b43-phy0 debug: 32-bit DMA initialized Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio b43-phy0 debug: Wireless interface started b43-phy0 debug: Adding Interface type 2 b43-phy0: Radio turned on by software NET: Registered protocol family 17 eth1: authenticate with AP 00:1a:70:46:ba:b1 eth1: authenticated eth1: associate with AP 00:1a:70:46:ba:b1 eth1: RX AssocResp from 00:1a:70:46:ba:b1 (capab=0x431 status=0 aid=1) eth1: associated b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:1a:70:46:ba:b1 b43-phy0 debug: Using hardware based encryption for keyidx: 2, mac: ff:ff:ff:ff:ff:ff -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/