Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752119AbZFYONX (ORCPT ); Thu, 25 Jun 2009 10:13:23 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751110AbZFYONP (ORCPT ); Thu, 25 Jun 2009 10:13:15 -0400 Received: from hera.kernel.org ([140.211.167.34]:47201 "EHLO hera.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750964AbZFYONP (ORCPT ); Thu, 25 Jun 2009 10:13:15 -0400 Subject: Re: [HWMON] x86: hwmon/k8temp.c Add support for AMD 11H From: Jaswinder Singh Rajput To: Ingo Molnar Cc: Rudolf Marek , x86 maintainers , LKML , LM Sensors , Chuck Ebbert , fedora-kernel-owner , Jean Delvare In-Reply-To: <1245484600.3102.9.camel@localhost.localdomain> References: <1242979484.8796.7.camel@localhost.localdomain> <4A165F67.3020005@assembler.cz> <1242981748.10642.3.camel@localhost.localdomain> <1242984648.16532.3.camel@localhost.localdomain> <4A182B61.5010503@assembler.cz> <1243339833.12303.2.camel@localhost.localdomain> <4A1C08C6.7060103@assembler.cz> <1243352672.31783.10.camel@localhost.localdomain> <1245484600.3102.9.camel@localhost.localdomain> Content-Type: text/plain Date: Thu, 25 Jun 2009 19:39:03 +0530 Message-Id: <1245938943.5308.56.camel@hpdv5.satnam> Mime-Version: 1.0 X-Mailer: Evolution 2.24.5 (2.24.5-1.fc10) Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4355 Lines: 136 Ingo, I need to apply and then revert this patch each and every time I fetch -tip tree. And I need to do this many times like 20-30 times in a day. I need this patch to monitor the temperature for AMD 11H box as it is very hot here temp is around 47 C and my CPU temp goes high upto 87 C. My one AMD box is already broken due to high temperature. By using this patch I breaks building of the kernel as temperature reaches 80 C. I hope you understand my problem. If possible, can you please apply this patch in tip:out-of-tree (not-for-upstream) Thanks, -- JSR On Sat, 2009-06-20 at 13:26 +0530, Jaswinder Singh Rajput wrote: > This patch will also work for AMD 10H. But we are skipping it as : > > AMD 10H cpus reports Inaccurate Temperature Measurement: > http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/41322.pdf > Errata #319 > > Signed-off-by: Jaswinder Singh Rajput > --- > drivers/hwmon/k8temp.c | 31 +++++++++++++++++++++++++++++-- > 1 files changed, 29 insertions(+), 2 deletions(-) > > diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c > index 1fe9951..4459dbf 100644 > --- a/drivers/hwmon/k8temp.c > +++ b/drivers/hwmon/k8temp.c > @@ -1,5 +1,6 @@ > /* > * k8temp.c - Linux kernel module for hardware monitoring > + * for AMD K8 and derivatives > * > * Copyright (C) 2006 Rudolf Marek > * > @@ -33,7 +34,7 @@ > #include > #include > > -#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000) > +#define REG_TCTL 0xa4 > #define REG_TEMP 0xe4 > #define SEL_PLACE 0x40 > #define SEL_CORE 0x04 > @@ -52,6 +53,14 @@ struct k8temp_data { > u32 temp_offset; > }; > > +static unsigned long temp_from_reg(unsigned long val) > +{ > + if (boot_cpu_data.x86 > 0xf) > + return ((val) >> 21) * 125; > + else > + return ((((val) >> 16) & 0xff) - 49) * 1000; > +} > + > static struct k8temp_data *k8temp_update_device(struct device *dev) > { > struct k8temp_data *data = dev_get_drvdata(dev); > @@ -62,6 +71,11 @@ static struct k8temp_data *k8temp_update_device(struct device *dev) > > if (!data->valid > || time_after(jiffies, data->last_updated + HZ)) { > + if (boot_cpu_data.x86 > 0xf) { > + pci_read_config_dword(pdev, REG_TCTL, > + &data->temp[0][0]); > + goto update_done; > + } > pci_read_config_byte(pdev, REG_TEMP, &tmp); > tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */ > pci_write_config_byte(pdev, REG_TEMP, tmp); > @@ -89,6 +103,7 @@ static struct k8temp_data *k8temp_update_device(struct device *dev) > } > } > > +update_done: > data->last_updated = jiffies; > data->valid = 1; > } > @@ -123,7 +138,7 @@ static ssize_t show_temp(struct device *dev, > if (data->swap_core_select) > core = core ? 0 : 1; > > - temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset; > + temp = temp_from_reg(data->temp[core][place]) + data->temp_offset; > > return sprintf(buf, "%d\n", temp); > } > @@ -138,6 +153,14 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); > > static struct pci_device_id k8temp_ids[] = { > { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, > + /* > + * AMD 10H cpus reports Inaccurate Temperature Measurement : > + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/41322.pdf > + * Errata #319 > + * So skipping 10H > + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, > + */ > + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, > { 0 }, > }; > > @@ -157,6 +180,9 @@ static int __devinit k8temp_probe(struct pci_dev *pdev, > goto exit; > } > > + if (boot_cpu_data.x86 > 0xf) > + goto probe_done; > + > model = boot_cpu_data.x86_model; > stepping = boot_cpu_data.x86_mask; > > @@ -226,6 +252,7 @@ static int __devinit k8temp_probe(struct pci_dev *pdev, > data->sensorsp &= ~SEL_CORE; > } > > +probe_done: > data->name = "k8temp"; > mutex_init(&data->update_lock); > dev_set_drvdata(&pdev->dev, data); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/