Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758087AbZF2NXT (ORCPT ); Mon, 29 Jun 2009 09:23:19 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753215AbZF2NXG (ORCPT ); Mon, 29 Jun 2009 09:23:06 -0400 Received: from tamriel.snowman.net ([72.66.115.51]:58691 "EHLO tamriel.snowman.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751680AbZF2NXB (ORCPT ); Mon, 29 Jun 2009 09:23:01 -0400 Date: Mon, 29 Jun 2009 09:23:02 -0400 From: Stephen Frost To: Yinghai Lu Cc: linux-kernel@vger.kernel.org Subject: Re: ACPI issues on HP DL585 G2 Message-ID: <20090629132302.GR20436@tamriel.snowman.net> References: <20090628034038.GK20436@tamriel.snowman.net> <86802c440906272126s7d3b97afh16069280bd297827@mail.gmail.com> <20090628223132.GO20436@tamriel.snowman.net> <86802c440906281849m51ab3c82u84d76a1aaceba2ef@mail.gmail.com> <20090629015738.GQ20436@tamriel.snowman.net> <86802c440906282047h23d45627pacec7a23f871fc2c@mail.gmail.com> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="p19/OaUkOQckSefz" Content-Disposition: inline In-Reply-To: <86802c440906282047h23d45627pacec7a23f871fc2c@mail.gmail.com> X-Editor: Vim http://www.vim.org/ X-Info: http://www.snowman.net X-Operating-System: Linux/2.6.26-1-amd64 (x86_64) X-Uptime: 09:22:32 up 18 days, 10:49, 21 users, load average: 0.03, 0.05, 0.02 User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 86582 Lines: 1755 --p19/OaUkOQckSefz Content-Type: multipart/mixed; boundary="AaroDtM9M79Ffl67" Content-Disposition: inline --AaroDtM9M79Ffl67 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Yinghai, * Yinghai Lu (yhlu.kernel@gmail.com) wrote: > On Sun, Jun 28, 2009 at 6:57 PM, Stephen Frost wrote: > > They might not.. =A0I did upgrade the BIOS to the latest revision and I > > don't recall if the last 2.6.22 boot was before or after the BIOS > > upgrade. =A0The 2.6.29 and 2.6.30 boots (both w/o APIC) are from the sa= me > > BIOS. =A0Would it help to try booting under 2.6.22 with the BIOS that's= on > > there now? >=20 > that would help attached. > > > > Is there some other information I could provide while the machine is > > running? =A0Unfortunately, this is a rather important box for us. >=20 > put debug in /boot/grub/grub.conf for the kernel > and boot with serial console enabled... > to capture all. attached. Thanks, Stephen --AaroDtM9M79Ffl67 Content-Type: text/plain; charset=utf-8 Content-Disposition: attachment; filename="dmesg-2.6.22-apic" Content-Transfer-Encoding: quoted-printable Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks@debian.org) (gcc versi= on 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09= UTC 2007 Command line: root=3D/dev/cciss/c0d0p1 ro debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable) BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data) BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable) BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000047ffff000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 523854) 1 entries of 3200 used Entering add_active_range(0, 523862, 523863) 2 entries of 3200 used Entering add_active_range(0, 1048576, 4718591) 3 entries of 3200 used end_pfn_map =3D 4718591 DMI 2.4 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT 7FE4ED00, 0074 (r1 HP ProLiant 2 =D2=04 162E) ACPI: FACP 7FE4ED80, 00F4 (r3 HP A07 2 =D2=04 162E) ACPI: DSDT 7FE4EE80, 498A (r1 HP DSDT 1 INTL 20030228) ACPI: FACS 7FE4E100, 0040 ACPI: SPCR 7FE4E140, 0050 (r1 HP SPCRRBSU 1 =D2=04 162E) ACPI: HPET 7FE4E1C0, 0038 (r1 HP ProLiant 2 =D2=04 162E) ACPI: SPMI 7FE4E200, 0040 (r5 HP ProLiant 1 =D2=04 162E) ACPI: ERST 7FE4E240, 01D0 (r1 HP ProLiant 1 =D2=04 162E) ACPI: APIC 7FE4E440, 00C6 (r1 HP ProLiant 2 0) ACPI: SRAT 7FE4E580, 01A0 (r1 AMD FAM_F_10 2 AMD 1) ACPI: FFFF 7FE4E980, 0176 (r1 HP ProLiant 1 =D2=04 162E) ACPI: BERT 7FE4EB00, 0030 (r1 HP ProLiant 1 =D2=04 162E) ACPI: HEST 7FE4EB40, 0170 (r1 HP ProLiant 1 =D2=04 162E) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: PXM 2 -> APIC 4 -> Node 2 SRAT: PXM 2 -> APIC 5 -> Node 2 SRAT: PXM 3 -> APIC 6 -> Node 3 SRAT: PXM 3 -> APIC 7 -> Node 3 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used SRAT: Node 0 PXM 0 0-80000000 Entering add_active_range(0, 0, 159) 1 entries of 3200 used Entering add_active_range(0, 256, 523854) 1 entries of 3200 used Entering add_active_range(0, 523862, 523863) 2 entries of 3200 used SRAT: Node 0 PXM 0 0-180000000 Entering add_active_range(0, 0, 159) 3 entries of 3200 used Entering add_active_range(0, 256, 523854) 3 entries of 3200 used Entering add_active_range(0, 523862, 523863) 3 entries of 3200 used Entering add_active_range(0, 1048576, 1572864) 3 entries of 3200 used SRAT: Node 1 PXM 1 180000000-280000000 Entering add_active_range(1, 1572864, 2621440) 4 entries of 3200 used SRAT: Node 2 PXM 2 280000000-380000000 Entering add_active_range(2, 2621440, 3670016) 5 entries of 3200 used SRAT: Node 3 PXM 3 380000000-480000000 Entering add_active_range(3, 3670016, 4718591) 6 entries of 3200 used NUMA: Using 31 for the hash shift. Bootmem setup node 0 0000000000000000-0000000180000000 Bootmem setup node 1 0000000180000000-0000000280000000 Bootmem setup node 2 0000000280000000-0000000380000000 Bootmem setup node 3 0000000380000000-000000047ffff000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 4718591 early_node_map[7] active PFN ranges 0: 0 -> 159 0: 256 -> 523854 0: 523862 -> 523863 0: 1048576 -> 1572864 1: 1572864 -> 2621440 2: 2621440 -> 3670016 3: 3670016 -> 4718591 On node 0 totalpages: 1048046 DMA zone: 56 pages used for memmap DMA zone: 1034 pages reserved DMA zone: 2909 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505479 pages, LIFO batch:31 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 On node 1 totalpages: 1048576 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 14336 pages used for memmap Normal zone: 1034240 pages, LIFO batch:31 On node 2 totalpages: 1048576 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 14336 pages used for memmap Normal zone: 1034240 pages, LIFO batch:31 On node 3 totalpages: 1048575 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 14335 pages used for memmap Normal zone: 1034240 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) Processor #4 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) Processor #5 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xd9cf0000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xd9cf0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xd9fd0000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xd9fd0000, GSI 24-30 ACPI: IOAPIC (id[0x0a] address[0xd9fe0000] gsi_base[31]) IOAPIC[2]: apic_id 10, address 0xd9fe0000, GSI 31-37 ACPI: IOAPIC (id[0x0b] address[0xd9ff0000] gsi_base[38]) IOAPIC[3]: apic_id 11, address 0xd9ff0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. ACPI: NMI_SRC (dfl dfl global_irq 28) ACPI: NMI_SRC (dfl dfl global_irq 35) Setting APIC routing to flat ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 swsusp: Registered nosave memory region: 000000007fe4e000 - 000000007fe56000 swsusp: Registered nosave memory region: 000000007fe57000 - 0000000080000000 swsusp: Registered nosave memory region: 0000000080000000 - 00000000e0000000 swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000 swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000 swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000 swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 8 CPUs, 0 hotplug CPUs PERCPU: Allocating 37896 bytes of per cpu data Built 4 zonelists. Total pages: 4128228 Kernel command line: root=3D/dev/cciss/c0d0p1 ro debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2812.969 MHz processor. Console: colour VGA+ 80x25 Checking aperture... CPU 0: aperture @ 20000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 16438936k/18874364k available (2008k kernel code, 336156k reserved,= 945k data, 296k init) Calibrating delay using timer specific routine.. 5629.02 BogoMIPS (lpj=3D11= 258051) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12557905 Detected 12.557 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/8 APIC 0x2 Initializing CPU#1 Calibrating delay using timer specific routine.. 5625.95 BogoMIPS (lpj=3D11= 251916) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 2/8 APIC 0x4 Initializing CPU#2 Calibrating delay using timer specific routine.. 5626.12 BogoMIPS (lpj=3D11= 252243) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/4 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 3/8 APIC 0x6 Initializing CPU#3 Calibrating delay using timer specific routine.. 5626.08 BogoMIPS (lpj=3D11= 252169) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/6 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 4/8 APIC 0x1 Initializing CPU#4 Calibrating delay using timer specific routine.. 5626.05 BogoMIPS (lpj=3D11= 252119) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 4/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 5/8 APIC 0x3 Initializing CPU#5 Calibrating delay using timer specific routine.. 5625.96 BogoMIPS (lpj=3D11= 251922) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 5/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 6/8 APIC 0x5 Initializing CPU#6 Calibrating delay using timer specific routine.. 5625.94 BogoMIPS (lpj=3D11= 251896) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 6/5 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 7/8 APIC 0x7 Initializing CPU#7 Calibrating delay using timer specific routine.. 5625.97 BogoMIPS (lpj=3D11= 251944) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 7/7 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 Brought up 8 CPUs migration_cost=3D461,611 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: SSDT 7FE58000, 0AC4 (r2 HP PNOWSSDT 2 HP 1) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) PCI: Probing PCI hardware (bus 40) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT] ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5 ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *11 ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid IPI0001 pnp: ACPI device : hid PNP0103 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0F13 pnp: ACPI device : hid PNP0A06 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0003 pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0003 pnp: ACPI device : hid PNP0003 pnp: ACPI device : hid PNP0003 pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Time: hpet clocksource has been installed. ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: 00:01: ioport range 0x408-0x40f has been reserved pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:01: ioport range 0x700-0x73f has been reserved PCI: Bridge: 0000:00:09.0 IO window: 1000-2fff MEM window: d9d00000-d9efffff PREFETCH window: d0000000-d7ffffff PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:40:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:10.0 IO window: disabled. MEM window: da000000-ddffffff PREFETCH window: 88000000-880fffff PCI: Bridge: 0000:40:11.0 IO window: 3000-3fff MEM window: dfe00000-dfefffff PREFETCH window: 88100000-881fffff PCI: Setting latency timer of device 0000:40:0b.0 to 64 PCI: Setting latency timer of device 0000:40:0c.0 to 64 PCI: Setting latency timer of device 0000:40:0d.0 to 64 PCI: Setting latency timer of device 0000:40:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 2097152 (order: 13, 50331648 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 2097152 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 7574k freed audit: initializing netlink socket (disabled) audit(1246277507.840:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found enabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:0e.0 Boot video device is 0000:01:03.0 pci 0000:01:04.4: HCRESET not completed yet! PCI: Found enabled HT MSI Mapping on 0000:40:0b.0 PCI: Found enabled HT MSI Mapping on 0000:40:0c.0 PCI: Found enabled HT MSI Mapping on 0000:40:0d.0 PCI: Found enabled HT MSI Mapping on 0000:40:0e.0 PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:40:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0b.0:pcie00] PCI: Setting latency timer of device 0000:40:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0c.0:pcie00] PCI: Setting latency timer of device 0000:40:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0d.0:pcie00] PCI: Setting latency timer of device 0000:40:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0e.0:pcie00] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:09' and the driver 'serial' 00:09: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:06' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:07' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 296k freed ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not= present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not= present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not= present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not= present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not= present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not= present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not= present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not= present [20070126] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) = -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xd9cd0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx pnp: the driver 'ide' has been registered SCSI subsystem initialized HP CISS Driver (v 3.6.14) NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 163 ACPI: PCI Interrupt 0000:42:02.0[A] -> GSI 26 (level, low) -> IRQ 26 Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.11 (June 4, 2007) ACPI: PCI Interrupt 0000:41:01.0[A] -> GSI 31 (level, low) -> IRQ 31 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev a3) UDMA133 controller ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz fou= nd at mem dc000000, IRQ 31, node addr 001cc4f094fa ACPI: PCI Interrupt 0000:41:02.0[A] -> GSI 32 (level, low) -> IRQ 32 eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz fou= nd at mem da000000, IRQ 32, node addr 001cc4f094fc cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 26 using DAC blocks=3D 286677120 block_size=3D 512 heads=3D255, sectors=3D32, cylinders=3D35132 blocks=3D 860051248 block_size=3D 512 heads=3D255, sectors=3D32, cylinders=3D105399 blocks=3D 286677120 block_size=3D 512 heads=3D255, sectors=3D32, cylinders=3D35132 cciss/c0d0: p1 p2 blocks=3D 860051248 block_size=3D 512 heads=3D255, sectors=3D32, cylinders=3D105399 cciss/c0d1: unknown partition table usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice hub 1-6:1.0: USB hub found hub 1-6:1.0: 4 ports detected hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 libata version 2.21 loaded. hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) = -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ce0000 USB Universal Host Controller Interface driver v3.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) = -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redha= t.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb 2-3: new low speed USB device using ohci_hcd and address 2 usb 2-3: configuration #1 chosen from 1 choice udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DE= PRECATED; some udev features will not work correctly usb 3-1: new full speed USB device using uhci_hcd and address 2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pnp: the driver 'rtc_cmos' has been registered pnp: match found with the PnP device '00:0a' and the driver 'rtc_cmos' rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 pnp: Device 00:0a does not support disabling. rtc_cmos: probe of 00:0a failed with error -16 usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 7 ports detected usbcore: registered new interface driver hiddev input: Avocent HP 336047-B21 as /class/input/input0 input: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3 input: Avocent HP 336047-B21 as /class/input/input1 input: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3 input: HP Virtual Keyboard as /class/input/input2 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input3 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver EXT3 FS on cciss/c0d0p1, internal journal 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller ipmi message handler version 39.1 ipmi device interface IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, sl= ave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slav= e address 0x0, irq 0 ipmi_si: duplicate interface ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) = -> IRQ 16 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xd9df0000, = slave address 0x0, irq 16 Using irq 16 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: = 0x11) IPMI kcs interface initialized kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 16777208k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 acros= s:16777208k NET: Registered protocol family 15 Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007) bonding: MII link monitoring set to 100 ms bonding: bond0: Adding slave eth0. bonding: bond0: enslaving eth0 as a backup interface with a down link. bonding: bond0: Adding slave eth1. bonding: bond0: enslaving eth1 as a backup interface with a down link. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready ADDRCONF(NETDEV_UP): bond0: link is not ready Initializing XFRM netlink socket bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready bonding: bond0: link status up for interface eth0, enabling it in 10000 ms. bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready bonding: bond0: link status up for interface eth1, enabling it in 10000 ms. bonding: bond0: link status definitely up for interface eth0. bonding: bond0: making interface eth0 the new active one. bonding: bond0: first active interface up! ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready bonding: bond0: link status definitely up for interface eth1. eth1: no IPv6 routers present eth0: no IPv6 routers present bond0: no IPv6 routers present Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT misc device (ioctl) driver 3.04.04 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=3D10,220) pnp: the driver 'parport_pc' has been registered lp: driver loaded but no devices found ppdev: user-space parallel port driver --AaroDtM9M79Ffl67 Content-Type: text/plain; charset=utf-8 Content-Disposition: attachment; filename="boot-with-debug-2.6.30" Content-Transfer-Encoding: quoted-printable Probing EDD (edd=3Doff to disable)... ok=0D [ 0.000000] Initializing cgroup subsys cpuset=0D [ 0.000000] Initializing cgroup subsys cpu=0D [ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (waldi@debian= =2Eorg) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 U= TC 2009=0D [ 0.000000] Command line: root=3D/dev/cciss/c0d0p1 ro debug console=3Dtt= yS1,115200=0D [ 0.000000] KERNEL supported cpus:=0D [ 0.000000] Intel GenuineIntel=0D [ 0.000000] AMD AuthenticAMD=0D [ 0.000000] Centaur CentaurHauls=0D [ 0.000000] BIOS-provided physical RAM map:=0D [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)=0D [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)=0D [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)=0D [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable)=0D [ 0.000000] BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data)= =0D [ 0.000000] BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable)=0D [ 0.000000] BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved)=0D [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)=0D [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)=0D [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)=0D [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)=0D [ 0.000000] BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)=0D [ 0.000000] DMI 2.4 present.=0D [ 0.000000] last_pfn =3D 0x47ffff max_arch_pfn =3D 0x100000000=0D [ 0.000000] MTRR default type: uncachable=0D [ 0.000000] MTRR fixed ranges enabled:=0D [ 0.000000] 00000-9FFFF write-back=0D [ 0.000000] A0000-BFFFF uncachable=0D [ 0.000000] C0000-FFFFF write-back=0D [ 0.000000] MTRR variable ranges enabled:=0D [ 0.000000] 0 base 0000000000 mask FF80000000 write-back=0D [ 0.000000] 1 disabled=0D [ 0.000000] 2 disabled=0D [ 0.000000] 3 disabled=0D [ 0.000000] 4 disabled=0D [ 0.000000] 5 disabled=0D [ 0.000000] 6 disabled=0D [ 0.000000] 7 disabled=0D [ 0.000000] TOM2: 0000000480000000 aka 18432M=0D [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x701060007= 0106=0D [ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usab= le) =3D=3D> (reserved)=0D [ 0.000000] last_pfn =3D 0x7fe57 max_arch_pfn =3D 0x100000000=0D [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe57000=0D [ 0.000000] 0000000000 - 007fe00000 page 2M=0D [ 0.000000] 007fe00000 - 007fe57000 page 4k=0D [ 0.000000] kernel direct mapping tables up to 7fe57000 @ 8000-c000=0D [ 0.000000] init_memory_mapping: 0000000100000000-000000047ffff000=0D [ 0.000000] 0100000000 - 047fe00000 page 2M=0D [ 0.000000] 047fe00000 - 047ffff000 page 4k=0D [ 0.000000] kernel direct mapping tables up to 47ffff000 @ a000-1e000=0D [ 0.000000] RAMDISK: 3772d000 - 37fef723=0D [ 0.000000] ACPI: RSDP 00000000000f4f00 00024 (v02 HP )=0D [ 0.000000] ACPI: XSDT 000000007fe4ed00 00074 (v01 HP ProLiant 00000= 002 =D2=04 0000162E)=0D [ 0.000000] ACPI: FACP 000000007fe4ed80 000F4 (v03 HP A07 00000= 002 =D2=04 0000162E)=0D [ 0.000000] ACPI: DSDT 000000007fe4ee80 0498A (v01 HP DSDT 00000= 001 INTL 20030228)=0D [ 0.000000] ACPI: FACS 000000007fe4e100 00040=0D [ 0.000000] ACPI: SPCR 000000007fe4e140 00050 (v01 HP SPCRRBSU 00000= 001 =D2=04 0000162E)=0D [ 0.000000] ACPI: HPET 000000007fe4e1c0 00038 (v01 HP ProLiant 00000= 002 =D2=04 0000162E)=0D [ 0.000000] ACPI: SPMI 000000007fe4e200 00040 (v05 HP ProLiant 00000= 001 =D2=04 0000162E)=0D [ 0.000000] ACPI: ERST 000000007fe4e240 001D0 (v01 HP ProLiant 00000= 001 =D2=04 0000162E)=0D [ 0.000000] ACPI: APIC 000000007fe4e440 000C6 (v01 HP ProLiant 00000= 002 00000000)=0D [ 0.000000] ACPI: SRAT 000000007fe4e580 001A0 (v01 AMD FAM_F_10 00000= 002 AMD 00000001)=0D [ 0.000000] ACPI: FFFF 000000007fe4e980 00176 (v01 HP ProLiant 00000= 001 =D2=04 0000162E)=0D [ 0.000000] ACPI: BERT 000000007fe4eb00 00030 (v01 HP ProLiant 00000= 001 =D2=04 0000162E)=0D [ 0.000000] ACPI: HEST 000000007fe4eb40 00170 (v01 HP ProLiant 00000= 001 =D2=04 0000162E)=0D [ 0.000000] ACPI: Local APIC address 0xfee00000=0D [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0=0D [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0=0D [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1=0D [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1=0D [ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2=0D [ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2=0D [ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3=0D [ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3=0D [ 0.000000] SRAT: Node 0 PXM 0 0-a0000=0D [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000=0D [ 0.000000] SRAT: Node 0 PXM 0 100000000-180000000=0D [ 0.000000] SRAT: Node 1 PXM 1 180000000-280000000=0D [ 0.000000] SRAT: Node 2 PXM 2 280000000-380000000=0D [ 0.000000] SRAT: Node 3 PXM 3 380000000-480000000=0D [ 0.000000] NUMA: Allocated memnodemap from 19000 - 22040=0D [ 0.000000] NUMA: Using 20 for the hash shift.=0D [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000=0D [ 0.000000] NODE_DATA [0000000000022040 - 000000000002a03f]=0D [ 0.000000] bootmap [000000000002b000 - 000000000005afff] pages 30=0D [ 0.000000] (9 early reservations) =3D=3D> bootmem [0000000000 - 0180000= 000]=0D [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page =3D=3D> [000= 0000000 - 0000001000]=0D [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE =3D=3D> [000= 0006000 - 0000008000]=0D [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS =3D=3D> [000= 0200000 - 00007d98cc]=0D [ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK =3D=3D> [003= 772d000 - 0037fef723]=0D [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved =3D=3D> [000= 009f400 - 0000100000]=0D [ 0.000000] #5 [00007da000 - 00007da114] BRK =3D=3D> [000= 07da000 - 00007da114]=0D [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE =3D=3D> [000= 0008000 - 000000a000]=0D [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE =3D=3D> [000= 000a000 - 0000019000]=0D [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP =3D=3D> [000= 0019000 - 0000022040]=0D [ 0.000000] Bootmem setup node 1 0000000180000000-0000000280000000=0D [ 0.000000] NODE_DATA [0000000180000000 - 0000000180007fff]=0D [ 0.000000] bootmap [0000000180008000 - 0000000180027fff] pages 20=0D [ 0.000000] (9 early reservations) =3D=3D> bootmem [0180000000 - 0280000= 000]=0D [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page=0D [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE=0D [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS=0D [ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK=0D [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved=0D [ 0.000000] #5 [00007da000 - 00007da114] BRK=0D [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE=0D [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE=0D [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP=0D [ 0.000000] Bootmem setup node 2 0000000280000000-0000000380000000=0D [ 0.000000] NODE_DATA [0000000280000000 - 0000000280007fff]=0D [ 0.000000] bootmap [0000000280008000 - 0000000280027fff] pages 20=0D [ 0.000000] (9 early reservations) =3D=3D> bootmem [0280000000 - 0380000= 000]=0D [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page=0D [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE=0D [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS=0D [ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK=0D [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved=0D [ 0.000000] #5 [00007da000 - 00007da114] BRK=0D [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE=0D [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE=0D [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP=0D [ 0.000000] Bootmem setup node 3 0000000380000000-000000047ffff000=0D [ 0.000000] NODE_DATA [0000000380000000 - 0000000380007fff]=0D [ 0.000000] bootmap [0000000380008000 - 0000000380027fff] pages 20=0D [ 0.000000] (9 early reservations) =3D=3D> bootmem [0380000000 - 047ffff= 000]=0D [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page=0D [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE=0D [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS=0D [ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK=0D [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved=0D [ 0.000000] #5 [00007da000 - 00007da114] BRK=0D [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE=0D [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE=0D [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP=0D [ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80=0D [ 0.000000] [ffffe20000000000-ffffe200053fffff] PMD -> [ffff88002820000= 0-ffff88002b9fffff] on node 0=0D [ 0.000000] [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff88018020000= 0-ffff8801839fffff] on node 1=0D [ 0.000000] [ffffe20008c00000-ffffe2000c3fffff] PMD -> [ffff88028020000= 0-ffff8802839fffff] on node 2=0D [ 0.000000] [ffffe2000c400000-ffffe2000fbfffff] PMD -> [ffff88038020000= 0-ffff8803839fffff] on node 3=0D [ 0.000000] Zone PFN ranges:=0D [ 0.000000] DMA 0x00000000 -> 0x00001000=0D [ 0.000000] DMA32 0x00001000 -> 0x00100000=0D [ 0.000000] Normal 0x00100000 -> 0x0047ffff=0D [ 0.000000] Movable zone start PFN for each node=0D [ 0.000000] early_node_map[7] active PFN ranges=0D [ 0.000000] 0: 0x00000000 -> 0x0000009f=0D [ 0.000000] 0: 0x00000100 -> 0x0007fe4e=0D [ 0.000000] 0: 0x0007fe56 -> 0x0007fe57=0D [ 0.000000] 0: 0x00100000 -> 0x00180000=0D [ 0.000000] 1: 0x00180000 -> 0x00280000=0D [ 0.000000] 2: 0x00280000 -> 0x00380000=0D [ 0.000000] 3: 0x00380000 -> 0x0047ffff=0D [ 0.000000] On node 0 totalpages: 1048046=0D [ 0.000000] DMA zone: 56 pages used for memmap=0D [ 0.000000] DMA zone: 1622 pages reserved=0D [ 0.000000] DMA zone: 2321 pages, LIFO batch:0=0D [ 0.000000] DMA32 zone: 14280 pages used for memmap=0D [ 0.000000] DMA32 zone: 505479 pages, LIFO batch:31=0D [ 0.000000] Normal zone: 7168 pages used for memmap=0D [ 0.000000] Normal zone: 517120 pages, LIFO batch:31=0D [ 0.000000] On node 1 totalpages: 1048576=0D [ 0.000000] Normal zone: 14336 pages used for memmap=0D [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31=0D [ 0.000000] On node 2 totalpages: 1048576=0D [ 0.000000] Normal zone: 14336 pages used for memmap=0D [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31=0D [ 0.000000] On node 3 totalpages: 1048575=0D [ 0.000000] Normal zone: 14336 pages used for memmap=0D [ 0.000000] Normal zone: 1034239 pages, LIFO batch:31=0D [ 0.000000] Detected use of extended apic ids on hypertransport bus=0D [ 0.000000] Detected use of extended apic ids on hypertransport bus=0D [ 0.000000] Detected use of extended apic ids on hypertransport bus=0D [ 0.000000] Detected use of extended apic ids on hypertransport bus=0D [ 0.000000] ACPI: PM-Timer IO Port: 0x908=0D [ 0.000000] ACPI: Local APIC address 0xfee00000=0D [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)=0D [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)=0D [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)=0D [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)=0D [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)=0D [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)=0D [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)=0D [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)=0D [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])=0D [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xd9cf0000] gsi_base[0])=0D [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xd9cf0000, GSI 0-2= 3=0D [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xd9fd0000] gsi_base[24])=0D [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xd9fd0000, GSI 24-= 30=0D [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xd9fe0000] gsi_base[31])=0D [ 0.000000] IOAPIC[2]: apic_id 10, version 0, address 0xd9fe0000, GSI 31= -37=0D [ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xd9ff0000] gsi_base[38])=0D [ 0.000000] IOAPIC[3]: apic_id 11, version 0, address 0xd9ff0000, GSI 38= -61=0D [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge)=0D [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)=0D [ 0.000000] ACPI: IRQ0 used by override.=0D [ 0.000000] ACPI: IRQ9 used by override.=0D [ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 28)=0D [ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 35)=0D [ 0.000000] Using ACPI (MADT) for SMP configuration information=0D [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000=0D [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs=0D [ 0.000000] nr_irqs_gsi: 62=0D [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000= a0000=0D [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000= f0000=0D [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 00000000001= 00000=0D [ 0.000000] PM: Registered nosave memory: 000000007fe4e000 - 000000007fe= 56000=0D [ 0.000000] PM: Registered nosave memory: 000000007fe57000 - 00000000800= 00000=0D [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e00= 00000=0D [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f00= 00000=0D [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec= 00000=0D [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed= 00000=0D [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee= 00000=0D [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee= 10000=0D [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffc= 00000=0D [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000001000= 00000=0D [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000= :60000000)=0D [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:4=0D [ 0.000000] PERCPU: Allocated 19 4k pages, static data 76256 bytes=0D [ 0.000000] Built 4 zonelists in Zone order, mobility grouping on. Tota= l pages: 4127639=0D [ 0.000000] Policy zone: Normal=0D [ 0.000000] Kernel command line: root=3D/dev/cciss/c0d0p1 ro debug conso= le=3DttyS1,115200=0D [ 0.000000] Initializing CPU#0=0D [ 0.000000] Experimental hierarchical RCU implementation.=0D [ 0.000000] Experimental hierarchical RCU init done.=0D [ 0.000000] NR_IRQS:4352 nr_irqs:1118=0D [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)=0D [ 0.000000] Extended CMOS year: 2000=0D [ 0.000000] Fast TSC calibration using PIT=0D [ 0.000000] Detected 2813.220 MHz processor.=0D [ 0.004000] spurious 8259A interrupt: IRQ7.=0D [ 0.004000] Console: colour VGA+ 80x25=0D [ 0.004000] console [ttyS1] enabled=0D [ 0.004000] Checking aperture...=0D [ 0.004000] No AGP bridge found=0D [ 0.004000] Node 0: aperture @ 20000000 size 32 MB=0D [ 0.004000] Aperture pointing to e820 RAM. Ignoring.=0D [ 0.004000] Your BIOS doesn't leave a aperture memory hole=0D [ 0.004000] Please enable the IOMMU option in the BIOS setup=0D [ 0.004000] This costs you 64 MB of RAM=0D [ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000=0D [ 0.004000] PM: Registered nosave memory: 0000000020000000 - 00000000240= 00000=0D [ 0.004000] Memory: 16463796k/18874364k available (2782k kernel code, 20= 99272k absent, 311296k reserved, 1398k data, 560k init)=0D [ 0.004000] hpet clockevent registered=0D [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu t= imer=0D [ 0.004000] Calibrating delay loop (skipped), value calculated using tim= er frequency.. 5626.44 BogoMIPS (lpj=3D11252880)=0D [ 0.004000] Security Framework initialized=0D [ 0.004000] SELinux: Disabled at boot.=0D [ 0.005448] Dentry cache hash table entries: 2097152 (order: 12, 1677721= 6 bytes)=0D [ 0.019021] Inode-cache hash table entries: 1048576 (order: 11, 8388608 = bytes)=0D [ 0.025049] Mount-cache hash table entries: 256=0D [ 0.025428] Initializing cgroup subsys ns=0D [ 0.025944] Initializing cgroup subsys cpuacct=0D [ 0.026946] Initializing cgroup subsys devices=0D [ 0.027938] Initializing cgroup subsys freezer=0D [ 0.028004] Initializing cgroup subsys net_cls=0D [ 0.029064] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line)=0D [ 0.030050] CPU: L2 Cache: 1024K (64 bytes/line)=0D [ 0.031000] CPU 0/0x0 -> Node 0=0D [ 0.032002] tseg: 0000000000=0D [ 0.032994] CPU: Physical Processor ID: 0=0D [ 0.034006] CPU: Processor Core ID: 0=0D [ 0.035034] using C1E aware idle routine=0D [ 0.036583] ACPI: Core revision 20090320=0D [ 0.046374] Setting APIC routing to flat=0D [ 0.048421] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D0 apic2=3D-1 pin2=3D= -1=0D [ 0.092558] CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03=0D [ 0.104001] Booting processor 1 APIC 0x2 ip 0x6000=0D [ 0.004000] Initializing CPU#1=0D [ 0.004000] Calibrating delay using timer specific routine.. 5625.98 Bog= oMIPS (lpj=3D11251976)=0D [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line)=0D [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)=0D [ 0.004000] CPU 1/0x2 -> Node 1=0D [ 0.004000] CPU: Physical Processor ID: 1=0D [ 0.004000] CPU: Processor Core ID: 0=0D [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x701060007= 0106=0D [ 0.196646] CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03=0D [ 0.204110] Booting processor 2 APIC 0x4 ip 0x6000=0D [ 0.004000] Initializing CPU#2=0D [ 0.004000] Calibrating delay using timer specific routine.. 5626.00 Bog= oMIPS (lpj=3D11252017)=0D [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line)=0D [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)=0D [ 0.004000] CPU 2/0x4 -> Node 2=0D [ 0.004000] CPU: Physical Processor ID: 2=0D [ 0.004000] CPU: Processor Core ID: 0=0D [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x701060007= 0106=0D [ 0.300611] CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03=0D [ 0.316183] Booting processor 3 APIC 0x6 ip 0x6000=0D [ 0.004000] Initializing CPU#3=0D [ 0.004000] Calibrating delay using timer specific routine.. 5625.99 Bog= oMIPS (lpj=3D11251993)=0D [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line)=0D [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)=0D [ 0.004000] CPU 3/0x6 -> Node 3=0D [ 0.004000] CPU: Physical Processor ID: 3=0D [ 0.004000] CPU: Processor Core ID: 0=0D [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x701060007= 0106=0D [ 0.408736] CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03=0D [ 0.416687] Booting processor 4 APIC 0x1 ip 0x6000=0D [ 0.004000] Initializing CPU#4=0D [ 0.004000] Calibrating delay using timer specific routine.. 5625.96 Bog= oMIPS (lpj=3D11251933)=0D [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line)=0D [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)=0D [ 0.004000] CPU 4/0x1 -> Node 0=0D [ 0.004000] CPU: Physical Processor ID: 0=0D [ 0.004000] CPU: Processor Core ID: 1=0D [ 0.004000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x701060007= 0106=0D [ 0.512533] CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03=0D [ 0.528175] Booting processor 5 APIC 0x3 ip 0x6000=0D [ 0.004000] Initializing CPU#5=0D [ 0.004000] Calibrating delay using timer specific routine.. 5626.00 Bog= oMIPS (lpj=3D11252000)=0D [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line)=0D [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)=0D [ 0.004000] CPU 5/0x3 -> Node 1=0D [ 0.004000] CPU: Physical Processor ID: 1=0D [ 0.004000] CPU: Processor Core ID: 1=0D [ 0.004000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x701060007= 0106=0D [ 0.620606] CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03=0D [ 0.628739] Booting processor 6 APIC 0x5 ip 0x6000=0D [ 0.004000] Initializing CPU#6=0D [ 0.004000] Calibrating delay using timer specific routine.. 5626.01 Bog= oMIPS (lpj=3D11252033)=0D [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line)=0D [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)=0D [ 0.004000] CPU 6/0x5 -> Node 2=0D [ 0.004000] CPU: Physical Processor ID: 2=0D [ 0.004000] CPU: Processor Core ID: 1=0D [ 0.004000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x701060007= 0106=0D [ 0.724628] CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03=0D [ 0.736213] Booting processor 7 APIC 0x7 ip 0x6000=0D [ 0.004000] Initializing CPU#7=0D [ 0.004000] Calibrating delay using timer specific routine.. 5625.96 Bog= oMIPS (lpj=3D11251925)=0D [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line)=0D [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)=0D [ 0.004000] CPU 7/0x7 -> Node 3=0D [ 0.004000] CPU: Physical Processor ID: 3=0D [ 0.004000] CPU: Processor Core ID: 1=0D [ 0.004000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x701060007= 0106=0D [ 0.832703] CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03=0D [ 0.840009] Brought up 8 CPUs=0D [ 0.841323] Total of 8 processors activated (45008.37 BogoMIPS).=0D [ 0.844152] CPU0 attaching sched-domain:=0D [ 0.848005] domain 0: span 0,4 level CPU=0D [ 0.849811] groups: 0 4=0D [ 0.854015] domain 1: span 0-7 level NODE=0D [ 0.856840] groups: 0,4 (__cpu_power =3D 2048) 1,5 (__cpu_power =3D 2= 048) 2,6 (__cpu_power =3D 2048) 3,7 (__cpu_power =3D 2048)=0D [ 0.876005] CPU1 attaching sched-domain:=0D [ 0.880008] domain 0: span 1,5 level CPU=0D [ 0.888003] groups: 1 5=0D [ 0.889280] domain 1: span 0-7 level NODE=0D [ 0.891170] groups: 1,5 (__cpu_power =3D 2048) 2,6 (__cpu_power =3D 2= 048) 3,7 (__cpu_power =3D 2048) 0,4 (__cpu_power =3D 2048)=0D [ 0.904902] CPU2 attaching sched-domain:=0D [ 0.908005] domain 0: span 2,6 level CPU=0D [ 0.912003] groups: 2 6=0D [ 0.920004] domain 1: span 0-7 level NODE=0D [ 0.924837] groups: 2,6 (__cpu_power =3D 2048) 3,7 (__cpu_power =3D 2= 048) 0,4 (__cpu_power =3D 2048) 1,5 (__cpu_power =3D 2048)=0D [ 0.952004] CPU3 attaching sched-domain:=0D [ 0.956004] domain 0: span 3,7 level CPU=0D [ 0.962700] groups: 3 7=0D [ 0.964255] domain 1: span 0-7 level NODE=0D [ 0.968003] groups: 3,7 (__cpu_power =3D 2048) 0,4 (__cpu_power =3D 2= 048) 1,5 (__cpu_power =3D 2048) 2,6 (__cpu_power =3D 2048)=0D [ 0.982117] CPU4 attaching sched-domain:=0D [ 0.984004] domain 0: span 0,4 level CPU=0D [ 0.992003] groups: 4 0=0D [ 1.000004] domain 1: span 0-7 level NODE=0D [ 1.004835] groups: 0,4 (__cpu_power =3D 2048) 1,5 (__cpu_power =3D 2= 048) 2,6 (__cpu_power =3D 2048) 3,7 (__cpu_power =3D 2048)=0D [ 1.015035] CPU5 attaching sched-domain:=0D [ 1.016004] domain 0: span 1,5 level CPU=0D [ 1.024003] groups: 5 1=0D [ 1.032004] domain 1: span 0-7 level NODE=0D [ 1.036842] groups: 1,5 (__cpu_power =3D 2048) 2,6 (__cpu_power =3D 2= 048) 3,7 (__cpu_power =3D 2048) 0,4 (__cpu_power =3D 2048)=0D [ 1.060108] CPU6 attaching sched-domain:=0D [ 1.062024] domain 0: span 2,6 level CPU=0D [ 1.064773] groups: 6 2=0D [ 1.066034] domain 1: span 0-7 level NODE=0D [ 1.067910] groups: 2,6 (__cpu_power =3D 2048) 3,7 (__cpu_power =3D 2= 048) 0,4 (__cpu_power =3D 2048) 1,5 (__cpu_power =3D 2048)=0D [ 1.077805] CPU7 attaching sched-domain:=0D [ 1.080004] domain 0: span 3,7 level CPU=0D [ 1.082771] groups: 7 3=0D [ 1.088004] domain 1: span 0-7 level NODE=0D [ 1.092839] groups: 3,7 (__cpu_power =3D 2048) 0,4 (__cpu_power =3D 2= 048) 1,5 (__cpu_power =3D 2048) 2,6 (__cpu_power =3D 2048)=0D [ 1.109100] net_namespace: 1936 bytes=0D [ 1.112064] Booting paravirtualized kernel on bare hardware=0D [ 1.116123] regulator: core version 0.5=0D [ 1.120164] NET: Registered protocol family 16=0D [ 1.124041] node 0 link 1: io port [1000, 2fff]=0D [ 1.128005] node 1 link 2: io port [3000, ffff]=0D [ 1.132004] TOM: 0000000080000000 aka 2048M=0D [ 1.136004] node 0 link 1: mmio [d0000000, d9efffff]=0D [ 1.140079] node 1 link 2: mmio [d9f00000, dfefffff]=0D [ 1.145009] node 0 link 1: mmio [e0000000, e3ffffff]=0D [ 1.148105] node 1 link 2: mmio [e4000000, e7ffffff]=0D [ 1.152109] node 0 link 1: mmio [a0000, bffff]=0D [ 1.155937] TOM2: 0000000480000000 aka 18432M=0D [ 1.156005] bus: [00,3f] on node 0 link 1=0D [ 1.160004] bus: 00 index 0 io port: [0, 2fff]=0D [ 1.164004] bus: 00 index 1 mmio: [80000000, d9efffff]=0D [ 1.168004] bus: 00 index 2 mmio: [dff00000, e3ffffff]=0D [ 1.172004] bus: 00 index 3 mmio: [a0000, bffff]=0D [ 1.176004] bus: 00 index 4 mmio: [e8000000, ffffffff]=0D [ 1.180004] bus: 00 index 5 mmio: [480000000, fcffffffff]=0D [ 1.184004] bus: [40,7f] on node 1 link 2=0D [ 1.188004] bus: 40 index 0 io port: [3000, ffff]=0D [ 1.192004] bus: 40 index 1 mmio: [d9f00000, dfefffff]=0D [ 1.196004] bus: 40 index 2 mmio: [e4000000, e7ffffff]=0D [ 1.200013] ACPI: bus type pci registered=0D [ 1.204039] PCI: Using configuration type 1 for base access=0D [ 1.208010] PCI: HP ProLiant DL585 G2 detected, enabling pci=3Dbfsort.=0D [ 1.212268] bio: create slab at 0=0D [ 1.216390] ACPI: EC: Look up EC in DSDT=0D [ 1.227390] ACPI: SSDT 000000007fe58000 00AC4 (v02 HP PNOWSSDT 00000= 002 HP 00000001)=0D [ 1.232517] ACPI: Interpreter enabled=0D [ 1.236005] ACPI: (supports S0 S4 S5)=0D [ 1.240379] ACPI: Using IOAPIC for interrupt routing=0D [ 1.248824] ACPI: No dock devices found.=0D [ 1.252018] ACPI: PCI Root Bridge [PCI0] (0000:00)=0D [ 1.256091] pci 0000:00:02.0: reg 10 32bit mmio: [0xd9ce0000-0xd9ce0fff]= =0D [ 1.260016] pci 0000:00:02.0: supports D1 D2=0D [ 1.264004] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold= =0D [ 1.268005] pci 0000:00:02.0: PME# disabled=0D [ 1.269905] pci 0000:00:02.1: reg 10 32bit mmio: [0xd9cd0000-0xd9cd00ff]= =0D [ 1.272018] pci 0000:00:02.1: supports D1 D2=0D [ 1.276006] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold= =0D [ 1.280005] pci 0000:00:02.1: PME# disabled=0D [ 1.284027] pci 0000:00:06.0: reg 20 io port: [0x500-0x50f]=0D [ 1.288042] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold= =0D [ 1.292010] pci 0000:00:0c.0: PME# disabled=0D [ 1.296025] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold= =0D [ 1.300004] pci 0000:00:0d.0: PME# disabled=0D [ 1.304023] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold= =0D [ 1.308005] pci 0000:00:0e.0: PME# disabled=0D [ 1.312245] pci 0000:01:03.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]= =0D [ 1.316007] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff]=0D [ 1.320007] pci 0000:01:03.0: reg 18 32bit mmio: [0xd9ef0000-0xd9efffff]= =0D [ 1.324016] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]=0D [ 1.328017] pci 0000:01:03.0: supports D1 D2=0D [ 1.332026] pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]=0D [ 1.336007] pci 0000:01:04.0: reg 14 32bit mmio: [0xd9ee0000-0xd9ee01ff]= =0D [ 1.340027] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold=0D [ 1.344005] pci 0000:01:04.0: PME# disabled=0D [ 1.348031] pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff]=0D [ 1.352008] pci 0000:01:04.2: reg 14 32bit mmio: [0xd9ed0000-0xd9ed07ff]= =0D [ 1.356008] pci 0000:01:04.2: reg 18 32bit mmio: [0xd9ec0000-0xd9ec3fff]= =0D [ 1.360008] pci 0000:01:04.2: reg 1c 32bit mmio: [0xd9e00000-0xd9e7ffff]= =0D [ 1.364014] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff]=0D [ 1.368016] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold=0D [ 1.372006] pci 0000:01:04.2: PME# disabled=0D [ 1.376041] pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f]=0D [ 1.380023] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold=0D [ 1.384006] pci 0000:01:04.4: PME# disabled=0D [ 1.388026] pci 0000:01:04.6: reg 10 32bit mmio: [0xd9df0000-0xd9df00ff]= =0D [ 1.392032] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold=0D [ 1.396006] pci 0000:01:04.6: PME# disabled=0D [ 1.400029] pci 0000:00:09.0: transparent bridge=0D [ 1.404005] pci 0000:00:09.0: bridge io port: [0x1000-0x2fff]=0D [ 1.408005] pci 0000:00:09.0: bridge 32bit mmio: [0xd9d00000-0xd9efffff]= =0D [ 1.412005] pci 0000:00:09.0: bridge 32bit mmio pref: [0xd0000000-0xd7ff= ffff]=0D [ 1.416106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]=0D [ 1.420084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]=0D [ 1.424111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]=0D [ 1.428106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]=0D [ 1.432103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]=0D [ 1.440145] ACPI: PCI Root Bridge [PCI1] (0000:40)=0D [ 1.444130] pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold= =0D [ 1.448006] pci 0000:40:0b.0: PME# disabled=0D [ 1.452035] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold= =0D [ 1.456005] pci 0000:40:0c.0: PME# disabled=0D [ 1.460034] pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold= =0D [ 1.464006] pci 0000:40:0d.0: PME# disabled=0D [ 1.465912] pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold= =0D [ 1.468005] pci 0000:40:0e.0: PME# disabled=0D [ 1.470000] pci 0000:40:10.0: Enabling HT MSI Mapping=0D [ 1.472067] pci 0000:40:11.0: Enabling HT MSI Mapping=0D [ 1.476209] pci 0000:41:01.0: reg 10 64bit mmio: [0xdc000000-0xddffffff]= =0D [ 1.480016] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]=0D [ 1.484016] pci 0000:41:01.0: PME# supported from D3hot D3cold=0D [ 1.488005] pci 0000:41:01.0: PME# disabled=0D [ 1.489914] pci 0000:41:02.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]= =0D [ 1.492015] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff]=0D [ 1.496016] pci 0000:41:02.0: PME# supported from D3hot D3cold=0D [ 1.500005] pci 0000:41:02.0: PME# disabled=0D [ 1.504027] pci 0000:40:10.0: bridge 32bit mmio: [0xda000000-0xddffffff]= =0D [ 1.508035] pci 0000:42:02.0: reg 10 64bit mmio: [0xdfef0000-0xdfef1fff]= =0D [ 1.512007] pci 0000:42:02.0: reg 18 io port: [0x3000-0x30ff]=0D [ 1.516009] pci 0000:42:02.0: reg 1c 64bit mmio: [0xdfe80000-0xdfebffff]= =0D [ 1.520009] pci 0000:42:02.0: reg 30 32bit mmio: [0x000000-0x03ffff]=0D [ 1.524015] pci 0000:42:02.0: supports D1=0D [ 1.528027] pci 0000:40:11.0: bridge io port: [0x3000-0x3fff]=0D [ 1.532006] pci 0000:40:11.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]= =0D [ 1.536022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]=0D [ 1.540070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]=0D [ 1.544161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]=0D [ 1.548116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]=0D [ 1.552112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]=0D [ 1.556111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]=0D [ 1.560238] ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.=0D [ 1.566832] ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.=0D [ 1.570622] ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.=0D [ 1.575267] ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.=0D [ 1.578851] ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5=0D [ 1.582271] ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *11=0D [ 1.584571] ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.=0D [ 1.592869] ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.=0D [ 1.600881] ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.=0D [ 1.608885] ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.=0D [ 1.616736] usbcore: registered new interface driver usbfs=0D [ 1.620026] usbcore: registered new interface driver hub=0D [ 1.624022] usbcore: registered new device driver usb=0D [ 1.628024] PCI: Using ACPI for IRQ routing=0D [ 1.632125] Expanded resource reserved due to conflict with PCI Bus #00= =0D [ 1.636005] Expanded resource reserved due to conflict with PCI Bus #00= =0D [ 1.652117] PCI-DMA: Disabling AGP.=0D [ 1.656125] PCI-DMA: aperture base @ 20000000 size 65536 KB=0D [ 1.660006] PCI-DMA: using GART IOMMU.=0D [ 1.664007] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture=0D [ 1.668708] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31=0D [ 1.678342] hpet0: 3 comparators, 32-bit 25.000000 MHz counter=0D [ 1.700014] Switched to high resolution mode on CPU 0=0D [ 1.700509] Switched to high resolution mode on CPU 4=0D [ 1.700590] Switched to high resolution mode on CPU 2=0D [ 1.700595] Switched to high resolution mode on CPU 6=0D [ 1.700614] Switched to high resolution mode on CPU 1=0D [ 1.700622] Switched to high resolution mode on CPU 5=0D [ 1.700728] Switched to high resolution mode on CPU 3=0D [ 1.700734] Switched to high resolution mode on CPU 7=0D [ 1.940009] pnp: PnP ACPI init=0D [ 1.957524] ACPI: bus type pnp registered=0D [ 1.967669] pnp: PnP ACPI: found 16 devices=0D [ 1.990145] ACPI: ACPI bus type pnp unregistered=0D [ 2.017455] system 00:01: ioport range 0x408-0x40f has been reserved=0D [ 2.046150] system 00:01: ioport range 0x4d0-0x4d1 has been reserved=0D [ 2.083139] system 00:01: ioport range 0x700-0x73f has been reserved=0D [ 2.086009] system 00:01: ioport range 0x800-0x8fe has been reserved=0D [ 2.110157] system 00:01: ioport range 0x900-0x9fe has been reserved=0D [ 2.124136] system 00:01: ioport range 0x9ff-0x9ff has been reserved=0D [ 2.149160] system 00:01: ioport range 0xa00-0xafe has been reserved=0D [ 2.186185] system 00:01: ioport range 0xaff-0xaff has been reserved=0D [ 2.212150] system 00:01: ioport range 0xb00-0xbfe has been reserved=0D [ 2.249156] system 00:01: ioport range 0xbff-0xbff has been reserved=0D [ 2.275152] system 00:01: ioport range 0xc80-0xc83 has been reserved=0D [ 2.311161] system 00:01: ioport range 0xcd4-0xcd7 has been reserved=0D [ 2.347167] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved= =0D [ 2.375057] system 00:01: ioport range 0xf50-0xf58 has been reserved=0D [ 2.411166] system 00:01: ioport range 0xca0-0xca1 has been reserved=0D [ 2.425452] system 00:01: ioport range 0xca4-0xca5 has been reserved=0D [ 2.443744] system 00:01: ioport range 0xc00-0xc03 has been reserved=0D [ 2.464192] system 00:01: ioport range 0x2f8-0x2ff has been reserved=0D [ 2.506582] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01=0D [ 2.539152] pci 0000:00:09.0: IO window: 0x1000-0x2fff=0D [ 2.570472] pci 0000:00:09.0: MEM window: 0xd9d00000-0xd9efffff=0D [ 2.574146] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x0000= 00d7ffffff=0D [ 2.618165] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08=0D [ 2.641147] pci 0000:00:0c.0: IO window: disabled=0D [ 2.669373] pci 0000:00:0c.0: MEM window: disabled=0D [ 2.698239] pci 0000:00:0c.0: PREFETCH window: disabled=0D [ 2.700685] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05=0D [ 2.729181] pci 0000:00:0d.0: IO window: disabled=0D [ 2.757167] pci 0000:00:0d.0: MEM window: disabled=0D [ 2.786181] pci 0000:00:0d.0: PREFETCH window: disabled=0D [ 2.788628] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02=0D [ 2.791277] pci 0000:00:0e.0: IO window: disabled=0D [ 2.809490] pci 0000:00:0e.0: MEM window: disabled=0D [ 2.838163] pci 0000:00:0e.0: PREFETCH window: disabled=0D [ 2.840610] pci 0000:00:09.0: setting latency timer to 64=0D [ 2.843016] pci 0000:00:0c.0: setting latency timer to 64=0D [ 2.873151] pci 0000:00:0d.0: setting latency timer to 64=0D [ 2.881135] pci 0000:00:0e.0: setting latency timer to 64=0D [ 2.912200] pci 0000:40:0b.0: PCI bridge, secondary bus 0000:4f=0D [ 2.946172] pci 0000:40:0b.0: IO window: disabled=0D [ 2.963206] pci 0000:40:0b.0: MEM window: disabled=0D [ 2.981201] pci 0000:40:0b.0: PREFETCH window: disabled=0D [ 2.983638] pci 0000:40:0c.0: PCI bridge, secondary bus 0000:4c=0D [ 3.012182] pci 0000:40:0c.0: IO window: disabled=0D [ 3.039516] pci 0000:40:0c.0: MEM window: disabled=0D [ 3.047943] pci 0000:40:0c.0: PREFETCH window: disabled=0D [ 3.077157] pci 0000:40:0d.0: PCI bridge, secondary bus 0000:49=0D [ 3.079815] pci 0000:40:0d.0: IO window: disabled=0D [ 3.104195] pci 0000:40:0d.0: MEM window: disabled=0D [ 3.130465] pci 0000:40:0d.0: PREFETCH window: disabled=0D [ 3.153179] pci 0000:40:0e.0: PCI bridge, secondary bus 0000:46=0D [ 3.187165] pci 0000:40:0e.0: IO window: disabled=0D [ 3.215256] pci 0000:40:0e.0: MEM window: disabled=0D [ 3.244170] pci 0000:40:0e.0: PREFETCH window: disabled=0D [ 3.274221] pci 0000:40:10.0: PCI bridge, secondary bus 0000:41=0D [ 3.308178] pci 0000:40:10.0: IO window: disabled=0D [ 3.336189] pci 0000:40:10.0: MEM window: 0xda000000-0xddffffff=0D [ 3.371211] pci 0000:40:10.0: PREFETCH window: 0x000000d9f00000-0x0000= 00d9ffffff=0D [ 3.415171] pci 0000:40:11.0: PCI bridge, secondary bus 0000:42=0D [ 3.418746] pci 0000:40:11.0: IO window: 0x3000-0x3fff=0D [ 3.421189] pci 0000:40:11.0: MEM window: 0xdfe00000-0xdfefffff=0D [ 3.445169] pci 0000:40:11.0: PREFETCH window: 0x000000de000000-0x0000= 00de0fffff=0D [ 3.468981] pci 0000:40:0b.0: setting latency timer to 64=0D [ 3.498222] pci 0000:40:0c.0: setting latency timer to 64=0D [ 3.500669] pci 0000:40:0d.0: setting latency timer to 64=0D [ 3.526170] pci 0000:40:0e.0: setting latency timer to 64=0D [ 3.546183] pci_bus 0000:00: resource 0 io: [0x00-0x2fff]=0D [ 3.566494] pci_bus 0000:00: resource 1 mem: [0x80000000-0xd9efffff]=0D [ 3.603196] pci_bus 0000:00: resource 2 mem: [0xdff00000-0xe3ffffff]=0D [ 3.628197] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]=0D [ 3.651265] pci_bus 0000:00: resource 4 mem: [0xe8000000-0xffffffff]=0D [ 3.670843] pci_bus 0000:00: resource 5 mem: [0x480000000-0xfcffffffff]= =0D [ 3.673813] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff]=0D [ 3.676354] pci_bus 0000:01: resource 1 mem: [0xd9d00000-0xd9efffff]=0D [ 3.703416] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]= =0D [ 3.742370] pci_bus 0000:01: resource 3 io: [0x00-0x2fff]=0D [ 3.753214] pci_bus 0000:01: resource 4 mem: [0x80000000-0xd9efffff]=0D [ 3.779205] pci_bus 0000:01: resource 5 mem: [0xdff00000-0xe3ffffff]=0D [ 3.815204] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]=0D [ 3.827199] pci_bus 0000:01: resource 7 mem: [0xe8000000-0xffffffff]=0D [ 3.853497] pci_bus 0000:01: resource 8 mem: [0x480000000-0xfcffffffff]= =0D [ 3.884189] pci_bus 0000:40: resource 0 io: [0x3000-0xffff]=0D [ 3.905203] pci_bus 0000:40: resource 1 mem: [0xd9f00000-0xdfefffff]=0D [ 3.913677] pci_bus 0000:40: resource 2 mem: [0xe4000000-0xe7ffffff]=0D [ 3.934225] pci_bus 0000:41: resource 1 mem: [0xda000000-0xddffffff]=0D [ 3.971546] pci_bus 0000:41: resource 2 pref mem [0xd9f00000-0xd9ffffff]= =0D [ 3.974579] pci_bus 0000:42: resource 0 io: [0x3000-0x3fff]=0D [ 4.000243] pci_bus 0000:42: resource 1 mem: [0xdfe00000-0xdfefffff]=0D [ 4.037538] pci_bus 0000:42: resource 2 pref mem [0xde000000-0xde0fffff]= =0D [ 4.040775] NET: Registered protocol family 2=0D [ 4.116540] IP route cache hash table entries: 524288 (order: 10, 419430= 4 bytes)=0D [ 4.162713] TCP established hash table entries: 524288 (order: 11, 83886= 08 bytes)=0D [ 4.200152] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)= =0D [ 4.239278] TCP: Hash tables configured (established 524288 bind 65536)= =0D [ 4.276228] TCP reno registered=0D [ 4.312283] NET: Registered protocol family 1=0D [ 4.336325] Trying to unpack rootfs image as initramfs...=0D [ 4.624886] Freeing initrd memory: 8969k freed=0D [ 4.657805] audit: initializing netlink socket (disabled)=0D [ 4.687272] type=3D2000 audit(1246278158.687:1): initialized=0D [ 4.720954] HugeTLB registered 2 MB page size, pre-allocated 0 pages=0D [ 4.756685] VFS: Disk quotas dquot_6.5.2=0D [ 4.778321] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)=0D [ 4.814913] msgmni has been set to 32173=0D [ 4.837641] alg: No test for stdrng (krng)=0D [ 4.860377] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma= jor 253)=0D [ 4.892210] io scheduler noop registered=0D [ 4.893971] io scheduler anticipatory registered=0D [ 4.896038] io scheduler deadline registered=0D [ 4.919312] io scheduler cfq registered (default)=0D [ 4.976024] pci 0000:00:0c.0: Found enabled HT MSI Mapping=0D [ 5.007663] pci 0000:00:0d.0: Found enabled HT MSI Mapping=0D [ 5.021253] pci 0000:00:0e.0: Found enabled HT MSI Mapping=0D [ 5.027515] pci 0000:01:03.0: Boot video device=0D [ 5.052257] pci 0000:01:04.4: HCRESET not completed yet!=0D [ 5.083283] pci 0000:40:0b.0: Found enabled HT MSI Mapping=0D [ 5.114281] pci 0000:40:0c.0: Found enabled HT MSI Mapping=0D [ 5.145240] pci 0000:40:0d.0: Found enabled HT MSI Mapping=0D [ 5.165247] pci 0000:40:0e.0: Found enabled HT MSI Mapping=0D [ 5.197482] alloc irq_desc for 62 on cpu 0 node 0=0D [ 5.201454] alloc kstat_irqs on cpu 0 node 0=0D [ 5.228248] pcieport-driver 0000:00:0c.0: irq 62 for MSI/MSI-X=0D [ 5.251251] pcieport-driver 0000:00:0c.0: setting latency timer to 64=0D [ 5.287406] alloc irq_desc for 63 on cpu 0 node 0=0D [ 5.291383] alloc kstat_irqs on cpu 0 node 0=0D [ 5.341232] pcieport-driver 0000:00:0d.0: irq 63 for MSI/MSI-X=0D [ 5.352289] pcieport-driver 0000:00:0d.0: setting latency timer to 64=0D [ 5.367374] alloc irq_desc for 64 on cpu 0 node 0=0D [ 5.371351] alloc kstat_irqs on cpu 0 node 0=0D [ 5.420258] pcieport-driver 0000:00:0e.0: irq 64 for MSI/MSI-X=0D [ 5.443244] pcieport-driver 0000:00:0e.0: setting latency timer to 64=0D [ 5.469462] alloc irq_desc for 65 on cpu 0 node 0=0D [ 5.473414] alloc kstat_irqs on cpu 0 node 0=0D [ 5.523272] pcieport-driver 0000:40:0b.0: irq 65 for MSI/MSI-X=0D [ 5.546260] pcieport-driver 0000:40:0b.0: setting latency timer to 64=0D [ 5.580680] alloc irq_desc for 66 on cpu 0 node 0=0D [ 5.584652] alloc kstat_irqs on cpu 0 node 0=0D [ 5.633290] pcieport-driver 0000:40:0c.0: irq 66 for MSI/MSI-X=0D [ 5.635925] pcieport-driver 0000:40:0c.0: setting latency timer to 64=0D [ 5.669437] alloc irq_desc for 67 on cpu 0 node 0=0D [ 5.673408] alloc kstat_irqs on cpu 0 node 0=0D [ 5.723247] pcieport-driver 0000:40:0d.0: irq 67 for MSI/MSI-X=0D [ 5.745270] pcieport-driver 0000:40:0d.0: setting latency timer to 64=0D [ 5.782390] alloc irq_desc for 68 on cpu 0 node 0=0D [ 5.786362] alloc kstat_irqs on cpu 0 node 0=0D [ 5.836269] pcieport-driver 0000:40:0e.0: irq 68 for MSI/MSI-X=0D [ 5.859301] pcieport-driver 0000:40:0e.0: setting latency timer to 64=0D [ 5.891293] Linux agpgart interface v0.103=0D [ 5.914267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled=0D [ 5.927833] serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A=0D [ 5.962398] serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A=0D [ 5.996727] 00:09: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A=0D [ 6.029795] brd: module loaded=0D [ 6.046372] input: Macintosh mouse button emulation as /devices/virtual/= input/input0=0D [ 6.090544] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64= irq 1,12=0D [ 6.133907] serio: i8042 KBD port at 0x60,0x64 irq 1=0D [ 6.161286] serio: i8042 AUX port at 0x60,0x64 irq 12=0D [ 6.189546] mice: PS/2 mouse device common for all mice=0D [ 6.219412] rtc_cmos 00:0a: RTC can wake from S4=0D [ 6.246395] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0=0D [ 6.280302] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs= =0D [ 6.319331] cpuidle: using governor ladder=0D [ 6.342304] cpuidle: using governor menu=0D [ 6.344081] No iBFT detected.=0D [ 6.359679] TCP cubic registered=0D [ 6.378510] NET: Registered protocol family 10=0D [ 6.403987] lo: Disabled Privacy Extensions=0D [ 6.415737] Mobile IPv6=0D [ 6.429491] NET: Registered protocol family 17=0D [ 6.455522] registered taskstats version 1=0D [ 6.478963] rtc_cmos 00:0a: setting system clock to 2009-06-29 12:22:45 = UTC (1246278165)=0D [ 6.524723] Freeing unused kernel memory: 560k freed=0D [ 6.552719] Write protecting the kernel read-only data: 3792k=0D Loading, please wait...=0D [ 6.714798] Uniform Multi-Platform E-IDE driver=0D [ 6.716253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver=0D [ 6.718659] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver=0D [ 6.807693] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23=0D [ 6.839316] alloc irq_desc for 23 on cpu 0 node 0=0D [ 6.843279] alloc kstat_irqs on cpu 0 node 0=0D [ 6.893319] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (le= vel, high) -> IRQ 23=0D [ 6.897178] ehci_hcd 0000:00:02.1: setting latency timer to 64=0D [ 6.913406] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.1 (M= ay 6, 2009)=0D [ 6.913439] alloc irq_desc for 31 on cpu 0 node 0=0D [ 6.913442] alloc kstat_irqs on cpu 0 node 0=0D [ 6.913458] bnx2 0000:41:01.0: PCI INT A -> GSI 31 (level, low) -> IRQ 3= 1=0D [ 7.060694] ehci_hcd 0000:00:02.1: EHCI Host Controller=0D [ 7.063192] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus = number 1=0D [ 7.063307] SCSI subsystem initialized=0D [ 7.107049] ehci_hcd 0000:00:02.1: debug port 1=0D [ 7.131294] ehci_hcd 0000:00:02.1: cache line size of 64 is not supporte= d=0D [ 7.170326] ehci_hcd 0000:00:02.1: irq 23, io mem 0xd9cd0000=0D [ 7.205670] HP CISS Driver (v 3.6.20)=0D [ 7.216011] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00=0D [ 7.216038] usb usb1: New USB device found, idVendor=3D1d6b, idProduct= =3D0002=0D [ 7.216040] usb usb1: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1=0D [ 7.216042] usb usb1: Product: EHCI Host Controller=0D [ 7.216043] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd=0D [ 7.216045] usb usb1: SerialNumber: 0000:00:02.1=0D [ 7.216115] usb usb1: configuration #1 chosen from 1 choice=0D [ 7.216143] hub 1-0:1.0: USB hub found=0D [ 7.216152] hub 1-0:1.0: 10 ports detected=0D [ 7.416946] ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22=0D [ 7.417379] alloc irq_desc for 26 on cpu 0 node 0=0D [ 7.417383] alloc kstat_irqs on cpu 0 node 0=0D [ 7.417397] cciss 0000:42:02.0: PCI INT A -> GSI 26 (level, low) -> IRQ = 26=0D [ 7.532512] alloc irq_desc for 22 on cpu 0 node 0=0D [ 7.534343] uhci_hcd: USB Universal Host Controller Interface driver=0D [ 7.584509] alloc kstat_irqs on cpu 0 node 0=0D [ 7.612264] IRQ 26/cciss0: IRQF_DISABLED is not guaranteed on shared IRQ= s=0D [ 7.612288] cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 26 using DAC=0D [ 7.645263] usb 1-6: new high speed USB device using ehci_hcd and addres= s 3=0D [ 7.716471] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (le= vel, high) -> IRQ 22=0D [ 7.765763] ohci_hcd 0000:00:02.0: setting latency timer to 64=0D [ 7.774088] usb 1-6: New USB device found, idVendor=3D04b4, idProduct=3D= 6560=0D [ 7.774091] usb 1-6: New USB device strings: Mfr=3D0, Product=3D0, Seria= lNumber=3D0=0D [ 7.774188] usb 1-6: configuration #1 chosen from 1 choice=0D [ 7.774358] hub 1-6:1.0: USB hub found=0D [ 7.774454] hub 1-6:1.0: 4 ports detected=0D [ 7.899333] ohci_hcd 0000:00:02.0: OHCI Host Controller=0D [ 7.929391] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus = number 2=0D [ 7.932286] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-mips-06-4.= 6.16.fw=0D [ 7.937068] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-rv2p-06-4.= 6.16.fw=0D [ 7.941190] eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64= -bit 100MHz found at mem dc000000, IRQ 31, node addr 00:1c:c4:f0:94:fa=0D [ 7.941290] alloc irq_desc for 32 on cpu 0 node 0=0D [ 7.941292] alloc kstat_irqs on cpu 0 node 0=0D [ 7.941302] bnx2 0000:41:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 3= 2=0D [ 8.154356] ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ce0000=0D [ 8.164594] ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17=0D [ 8.196362] alloc irq_desc for 17 on cpu 0 node 0=0D [ 8.200350] alloc kstat_irqs on cpu 0 node 0=0D [ 8.250368] uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (le= vel, high) -> IRQ 17=0D [ 8.276389] uhci_hcd 0000:01:04.4: UHCI Host Controller=0D [ 8.306431] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus = number 3=0D [ 8.349350] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 = ports=0D [ 8.356320] uhci_hcd 0000:01:04.4: HCRESET not completed yet!=0D [ 8.388361] uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800=0D [ 8.421398] usb usb3: New USB device found, idVendor=3D1d6b, idProduct= =3D0001=0D [ 8.460435] usb usb3: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1=0D [ 8.502322] usb usb3: Product: UHCI Host Controller=0D [ 8.508363] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd=0D [ 8.543335] usb usb3: SerialNumber: 0000:01:04.4=0D [ 8.570386] usb usb3: configuration #1 chosen from 1 choice=0D [ 8.601398] hub 3-0:1.0: USB hub found=0D [ 8.603183] hub 3-0:1.0: 2 ports detected=0D [ 8.607130] usb usb2: New USB device found, idVendor=3D1d6b, idProduct= =3D0001=0D [ 8.625375] usb usb2: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1=0D [ 8.636264] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-mips-06-4.= 6.16.fw=0D [ 8.641072] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-rv2p-06-4.= 6.16.fw=0D [ 8.645176] eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64= -bit 100MHz found at mem da000000, IRQ 32, node addr 00:1c:c4:f0:94:fc=0D [ 8.805389] usb usb2: Product: OHCI Host Controller=0D [ 8.812333] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd=0D [ 8.847786] usb usb2: SerialNumber: 0000:00:02.0=0D [ 8.874426] usb usb2: configuration #1 chosen from 1 choice=0D [ 8.877051] hub 2-0:1.0: USB hub found=0D [ 8.886360] hub 2-0:1.0: 10 ports detected=0D [ 8.910980] amd74xx 0000:00:06.0: UDMA133 controller=0D [ 8.938379] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xa3= )=0D [ 8.960110] amd74xx 0000:00:06.0: IDE port disabled=0D [ 8.985450] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs = later=0D [ 9.026428] ide0: BM-DMA at 0x0500-0x0507=0D [ 9.051405] Probing IDE interface ide0...=0D [ 9.192017] usb 3-1: new full speed USB device using uhci_hcd and addres= s 2=0D [ 9.375201] usb 3-1: New USB device found, idVendor=3D03f0, idProduct=3D= 1027=0D [ 9.413398] usb 3-1: New USB device strings: Mfr=3D1, Product=3D2, Seria= lNumber=3D0=0D [ 9.422346] usb 3-1: Product: Virtual Keyboard=0D [ 9.437788] usb 3-1: Manufacturer: HP=0D [ 9.442454] usb 3-1: configuration #1 chosen from 1 choice=0D [ 9.486596] usbcore: registered new interface driver hiddev=0D [ 9.521509] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09= =2E0/0000:01:04.4/usb3/3-1/3-1:1.0/input/input1=0D [ 9.561484] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.0= 1 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0=0D [ 9.591571] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09= =2E0/0000:01:04.4/usb3/3-1/3-1:1.1/input/input2=0D [ 9.621540] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.0= 1 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1=0D [ 9.648886] usbcore: registered new interface driver usbhid=0D [ 9.680681] usbhid: v2.6:USB HID core driver=0D [ 9.796016] usb 3-2: new full speed USB device using uhci_hcd and addres= s 3=0D [ 9.812130] hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive=0D [ 10.007035] usb 3-2: New USB device found, idVendor=3D03f0, idProduct=3D= 1327=0D [ 10.044421] usb 3-2: New USB device strings: Mfr=3D1, Product=3D2, Seria= lNumber=3D0=0D [ 10.066465] usb 3-2: Product: Virtual Hub=0D [ 10.068375] usb 3-2: Manufacturer: HP=0D [ 10.070200] usb 3-2: configuration #1 chosen from 1 choice=0D [ 10.105448] hub 3-2:1.0: USB hub found=0D [ 10.128174] hub 3-2:1.0: 7 ports detected=0D [ 10.148060] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4=0D [ 10.148839] hda: UDMA/33 mode selected=0D [ 10.149279] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14=0D [ 10.163218] libata version 3.00 loaded.=0D [ 10.170479] ide-cd driver 5.00=0D [ 10.172036] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048= kB Cache=0D [ 10.172041] Uniform CD-ROM driver Revision: 3.20=0D [ 10.464011] usb 2-3: new low speed USB device using ohci_hcd and address= 2=0D [ 10.720152] usb 2-3: New USB device found, idVendor=3D0624, idProduct=3D= 0341=0D [ 10.747414] usb 2-3: New USB device strings: Mfr=3D1, Product=3D2, Seria= lNumber=3D0=0D [ 10.774710] usb 2-3: Product: HP 336047-B21=0D [ 10.791406] usb 2-3: Manufacturer: Avocent=0D [ 10.793456] usb 2-3: configuration #1 chosen from 1 choice=0D [ 10.842417] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:= 02.0/usb2/2-3/2-3:1.0/input/input3=0D [ 10.882848] generic-usb 0003:0624:0341.0003: input,hidraw2: USB HID v1.1= 0 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input0=0D [ 10.948470] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:= 02.0/usb2/2-3/2-3:1.1/input/input4=0D [ 11.003649] generic-usb 0003:0624:0341.0004: input,hidraw3: USB HID v1.1= 0 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input1=0D [ 20.501306] uhci_hcd 0000:01:04.4: HCRESET not completed yet!=0D [ 20.533029] Restarting system.=0D [ 20.550720] machine restart=0D --AaroDtM9M79Ffl67-- --p19/OaUkOQckSefz Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkpIwDYACgkQrzgMPqB3kijM9ACfQMfjH6ZpsmOtdCyMFatLnj+M XXcAnicFINzBH+tcxjkAs0mw7GLxwtzP =O32U -----END PGP SIGNATURE----- --p19/OaUkOQckSefz-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/