Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758000AbZF3BQc (ORCPT ); Mon, 29 Jun 2009 21:16:32 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756151AbZF3BQN (ORCPT ); Mon, 29 Jun 2009 21:16:13 -0400 Received: from g1t0028.austin.hp.com ([15.216.28.35]:31574 "EHLO g1t0028.austin.hp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754021AbZF3BQI convert rfc822-to-8bit (ORCPT ); Mon, 29 Jun 2009 21:16:08 -0400 Date: Mon, 29 Jun 2009 19:15:41 -0600 From: dann frazier To: Stephen Frost Cc: Alex Chiang , linux-kernel@vger.kernel.org, David Altobelli , nagananda.chumbalkar@hp.com Subject: Re: ACPI issues on HP DL585 G2 Message-ID: <20090630011541.GL22480@ldl.fc.hp.com> References: <20090628034038.GK20436@tamriel.snowman.net> <20090628172052.GA13957@ldl.fc.hp.com> <20090628223258.GP20436@tamriel.snowman.net> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8BIT In-Reply-To: <20090628223258.GP20436@tamriel.snowman.net> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 60591 Lines: 960 On Sun, Jun 28, 2009 at 06:32:58PM -0400, Stephen Frost wrote: > * Alex Chiang (achiang@hp.com) wrote: > > I'm just scanning mail on the weekend, but what version of the > > BIOS are you on? Do you have the latest? > > Check the message I just posted, it includes a dmesg under 2.6.30 (also > with noapic, since it didn't boot w/o it again). fyi, I tested an HP DL585 G2 w/ the same 2.6.30 kernel build and didn't have any problems. I am running the A07 3/11/2009 BIOS. dmesg output follows: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 UTC 2009 [ 0.000000] Command line: root=/dev/disk/by-id/scsi-35000c50000d5ca0f-part1 ro console=tty1 console=ttyS1,115200 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable) [ 0.000000] BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable) [ 0.000000] BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000047ffff000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x47ffff max_arch_pfn = 0x100000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000480000000 aka 18432M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fe57 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe57000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fe57000 page 4k [ 0.000000] kernel direct mapping tables up to 7fe57000 @ 8000-c000 [ 0.000000] init_memory_mapping: 0000000100000000-000000047ffff000 [ 0.000000] 0100000000 - 047fe00000 page 2M [ 0.000000] 047fe00000 - 047ffff000 page 4k [ 0.000000] kernel direct mapping tables up to 47ffff000 @ a000-1e000 [ 0.000000] RAMDISK: 37908000 - 37fef60a [ 0.000000] ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 000000007fe4ed00 00074 (v01 HP ProLiant 00000002 � 0000162E) [ 0.000000] ACPI: FACP 000000007fe4ed80 000F4 (v03 HP A07 00000002 � 0000162E) [ 0.000000] ACPI: DSDT 000000007fe4ee80 0498A (v01 HP DSDT 00000001 INTL 20030228) [ 0.000000] ACPI: FACS 000000007fe4e100 00040 [ 0.000000] ACPI: SPCR 000000007fe4e140 00050 (v01 HP SPCRRBSU 00000001 � 0000162E) [ 0.000000] ACPI: HPET 000000007fe4e1c0 00038 (v01 HP ProLiant 00000002 � 0000162E) [ 0.000000] ACPI: SPMI 000000007fe4e200 00040 (v05 HP ProLiant 00000001 � 0000162E) [ 0.000000] ACPI: ERST 000000007fe4e240 001D0 (v01 HP ProLiant 00000001 � 0000162E) [ 0.000000] ACPI: APIC 000000007fe4e440 000C6 (v01 HP ProLiant 00000002 00000000) [ 0.000000] ACPI: SRAT 000000007fe4e580 001A0 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: FFFF 000000007fe4e980 00176 (v01 HP ProLiant 00000001 � 0000162E) [ 0.000000] ACPI: BERT 000000007fe4eb00 00030 (v01 HP ProLiant 00000001 � 0000162E) [ 0.000000] ACPI: HEST 000000007fe4eb40 00170 (v01 HP ProLiant 00000001 � 0000162E) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-180000000 [ 0.000000] SRAT: Node 1 PXM 1 180000000-280000000 [ 0.000000] SRAT: Node 2 PXM 2 280000000-380000000 [ 0.000000] SRAT: Node 3 PXM 3 380000000-480000000 [ 0.000000] NUMA: Allocated memnodemap from 19000 - 22040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 [ 0.000000] NODE_DATA [0000000000022040 - 000000000002a03f] [ 0.000000] bootmap [000000000002b000 - 000000000005afff] pages 30 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0180000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS ==> [0000200000 - 00007d98cc] [ 0.000000] #3 [0037908000 - 0037fef60a] RAMDISK ==> [0037908000 - 0037fef60a] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [00007da000 - 00007da114] BRK ==> [00007da000 - 00007da114] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE ==> [000000a000 - 0000019000] [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP ==> [0000019000 - 0000022040] [ 0.000000] Bootmem setup node 1 0000000180000000-0000000280000000 [ 0.000000] NODE_DATA [0000000180000000 - 0000000180007fff] [ 0.000000] bootmap [0000000180008000 - 0000000180027fff] pages 20 [ 0.000000] (9 early reservations) ==> bootmem [0180000000 - 0280000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS [ 0.000000] #3 [0037908000 - 0037fef60a] RAMDISK [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved [ 0.000000] #5 [00007da000 - 00007da114] BRK [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP [ 0.000000] Bootmem setup node 2 0000000280000000-0000000380000000 [ 0.000000] NODE_DATA [0000000280000000 - 0000000280007fff] [ 0.000000] bootmap [0000000280008000 - 0000000280027fff] pages 20 [ 0.000000] (9 early reservations) ==> bootmem [0280000000 - 0380000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS [ 0.000000] #3 [0037908000 - 0037fef60a] RAMDISK [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved [ 0.000000] #5 [00007da000 - 00007da114] BRK [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP [ 0.000000] Bootmem setup node 3 0000000380000000-000000047ffff000 [ 0.000000] NODE_DATA [0000000380000000 - 0000000380007fff] [ 0.000000] bootmap [0000000380008000 - 0000000380027fff] pages 20 [ 0.000000] (9 early reservations) ==> bootmem [0380000000 - 047ffff000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS [ 0.000000] #3 [0037908000 - 0037fef60a] RAMDISK [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved [ 0.000000] #5 [00007da000 - 00007da114] BRK [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP [ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80 [ 0.000000] [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0 [ 0.000000] [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1 [ 0.000000] [ffffe20008c00000-ffffe2000c3fffff] PMD -> [ffff880280200000-ffff8802839fffff] on node 2 [ 0.000000] [ffffe2000c400000-ffffe2000fbfffff] PMD -> [ffff880380200000-ffff8803839fffff] on node 3 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0047ffff [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0007fe4e [ 0.000000] 0: 0x0007fe56 -> 0x0007fe57 [ 0.000000] 0: 0x00100000 -> 0x00180000 [ 0.000000] 1: 0x00180000 -> 0x00280000 [ 0.000000] 2: 0x00280000 -> 0x00380000 [ 0.000000] 3: 0x00380000 -> 0x0047ffff [ 0.000000] On node 0 totalpages: 1048045 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1623 pages reserved [ 0.000000] DMA zone: 2319 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505479 pages, LIFO batch:31 [ 0.000000] Normal zone: 7168 pages used for memmap [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31 [ 0.000000] On node 2 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31 [ 0.000000] On node 3 totalpages: 1048575 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034239 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xd9cf0000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xd9cf0000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xd9fd0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xd9fd0000, GSI 24-30 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xd9fe0000] gsi_base[31]) [ 0.000000] IOAPIC[2]: apic_id 10, version 0, address 0xd9fe0000, GSI 31-37 [ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xd9ff0000] gsi_base[38]) [ 0.000000] IOAPIC[3]: apic_id 11, version 0, address 0xd9ff0000, GSI 38-61 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 28) [ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 35) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 62 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007fe4e000 - 000000007fe56000 [ 0.000000] PM: Registered nosave memory: 000000007fe57000 - 0000000080000000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:4 [ 0.000000] PERCPU: Allocated 19 4k pages, static data 76256 bytes [ 0.000000] Built 4 zonelists in Zone order, mobility grouping on. Total pages: 4127637 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-35000c50000d5ca0f-part1 ro console=tty1 console=ttyS1,115200 [ 0.000000] Initializing CPU#0 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:4352 nr_irqs:1118 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2612.041 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty1] enabled [ 0.004000] console [ttyS1] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ 4000000 size 32 MB [ 0.004000] Aperture pointing to e820 RAM. Ignoring. [ 0.004000] Your BIOS doesn't leave a aperture memory hole [ 0.004000] Please enable the IOMMU option in the BIOS setup [ 0.004000] This costs you 64 MB of RAM [ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.004000] Memory: 16465692k/18874364k available (2782k kernel code, 2099276k absent, 309396k reserved, 1398k data, 560k init) [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.08 BogoMIPS (lpj=10448164) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.005541] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.019660] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.026598] Mount-cache hash table entries: 256 [ 0.027143] Initializing cgroup subsys ns [ 0.028006] Initializing cgroup subsys cpuacct [ 0.029010] Initializing cgroup subsys devices [ 0.029624] Initializing cgroup subsys freezer [ 0.030613] Initializing cgroup subsys net_cls [ 0.032060] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.033073] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.034019] CPU 0/0x0 -> Node 0 [ 0.034970] tseg: 0000000000 [ 0.034984] CPU: Physical Processor ID: 0 [ 0.036002] CPU: Processor Core ID: 0 [ 0.037005] using C1E aware idle routine [ 0.038636] ACPI: Core revision 20090320 [ 0.049021] Setting APIC routing to flat [ 0.052425] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.099166] CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03 [ 0.112001] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5224.18 BogoMIPS (lpj=10448369) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 1/0x2 -> Node 1 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.200701] CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03 [ 0.208240] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5224.15 BogoMIPS (lpj=10448309) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 2/0x4 -> Node 2 [ 0.004000] CPU: Physical Processor ID: 2 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.304616] CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03 [ 0.316253] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5224.18 BogoMIPS (lpj=10448365) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 3/0x6 -> Node 3 [ 0.004000] CPU: Physical Processor ID: 3 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.408753] CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03 [ 0.420146] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#4 [ 0.004000] Calibrating delay using timer specific routine.. 5224.11 BogoMIPS (lpj=10448229) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 4/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.512559] CPU4: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03 [ 0.528165] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#5 [ 0.004000] Calibrating delay using timer specific routine.. 5224.15 BogoMIPS (lpj=10448306) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 5/0x3 -> Node 1 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.624721] CPU5: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03 [ 0.636213] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.004000] Initializing CPU#6 [ 0.004000] Calibrating delay using timer specific routine.. 5224.14 BogoMIPS (lpj=10448293) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 6/0x5 -> Node 2 [ 0.004000] CPU: Physical Processor ID: 2 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.728642] CPU6: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03 [ 0.740230] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.004000] Initializing CPU#7 [ 0.004000] Calibrating delay using timer specific routine.. 5224.12 BogoMIPS (lpj=10448240) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 7/0x7 -> Node 3 [ 0.004000] CPU: Physical Processor ID: 3 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.836764] CPU7: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03 [ 0.844584] Brought up 8 CPUs [ 0.848005] Total of 8 processors activated (41793.13 BogoMIPS). [ 0.852159] CPU0 attaching sched-domain: [ 0.852162] domain 0: span 0,4 level CPU [ 0.852165] groups: 0 4 [ 0.852168] domain 1: span 0-7 level NODE [ 0.852170] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) [ 0.852179] CPU1 attaching sched-domain: [ 0.852181] domain 0: span 1,5 level CPU [ 0.852183] groups: 1 5 [ 0.852186] domain 1: span 0-7 level NODE [ 0.852188] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) [ 0.852196] CPU2 attaching sched-domain: [ 0.852198] domain 0: span 2,6 level CPU [ 0.852200] groups: 2 6 [ 0.852203] domain 1: span 0-7 level NODE [ 0.852205] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) [ 0.852213] CPU3 attaching sched-domain: [ 0.852215] domain 0: span 3,7 level CPU [ 0.852217] groups: 3 7 [ 0.852220] domain 1: span 0-7 level NODE [ 0.852222] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) [ 0.852230] CPU4 attaching sched-domain: [ 0.852232] domain 0: span 0,4 level CPU [ 0.852234] groups: 4 0 [ 0.852237] domain 1: span 0-7 level NODE [ 0.852239] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) [ 0.852247] CPU5 attaching sched-domain: [ 0.852249] domain 0: span 1,5 level CPU [ 0.852251] groups: 5 1 [ 0.852254] domain 1: span 0-7 level NODE [ 0.852256] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) [ 0.852264] CPU6 attaching sched-domain: [ 0.852266] domain 0: span 2,6 level CPU [ 0.852268] groups: 6 2 [ 0.852271] domain 1: span 0-7 level NODE [ 0.852273] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) [ 0.852281] CPU7 attaching sched-domain: [ 0.852283] domain 0: span 3,7 level CPU [ 0.852285] groups: 7 3 [ 0.852288] domain 1: span 0-7 level NODE [ 0.852290] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) [ 0.852513] net_namespace: 1936 bytes [ 0.856066] Booting paravirtualized kernel on bare hardware [ 0.860133] regulator: core version 0.5 [ 0.863467] NET: Registered protocol family 16 [ 0.864042] node 0 link 1: io port [1000, 2fff] [ 0.864042] node 1 link 2: io port [3000, ffff] [ 0.864042] TOM: 0000000080000000 aka 2048M [ 0.868005] node 0 link 1: mmio [d0000000, d9efffff] [ 0.868007] node 1 link 2: mmio [d9f00000, dfefffff] [ 0.868010] node 0 link 1: mmio [e0000000, e3ffffff] [ 0.868012] node 1 link 2: mmio [e4000000, e7ffffff] [ 0.868015] node 0 link 1: mmio [a0000, bffff] [ 0.868017] TOM2: 0000000480000000 aka 18432M [ 0.872004] bus: [00,3f] on node 0 link 1 [ 0.872006] bus: 00 index 0 io port: [0, 2fff] [ 0.872008] bus: 00 index 1 mmio: [80000000, d9efffff] [ 0.872010] bus: 00 index 2 mmio: [dff00000, e3ffffff] [ 0.872012] bus: 00 index 3 mmio: [a0000, bffff] [ 0.872013] bus: 00 index 4 mmio: [e8000000, ffffffff] [ 0.872015] bus: 00 index 5 mmio: [480000000, fcffffffff] [ 0.872017] bus: [40,7f] on node 1 link 2 [ 0.872019] bus: 40 index 0 io port: [3000, ffff] [ 0.872021] bus: 40 index 1 mmio: [d9f00000, dfefffff] [ 0.872023] bus: 40 index 2 mmio: [e4000000, e7ffffff] [ 0.872034] ACPI: bus type pci registered [ 0.876040] PCI: Using configuration type 1 for base access [ 0.880009] PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort. [ 0.888289] bio: create slab at 0 [ 0.892416] ACPI: EC: Look up EC in DSDT [ 0.898484] ACPI: SSDT 000000007fe58000 009BC (v02 HP PNOWSSDT 00000002 HP 00000001) [ 0.904156] ACPI: Interpreter enabled [ 0.908005] ACPI: (supports S0 S4 S5) [ 0.913322] ACPI: Using IOAPIC for interrupt routing [ 0.924208] ACPI: No dock devices found. [ 0.928018] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.932094] pci 0000:00:02.0: reg 10 32bit mmio: [0xd9ce0000-0xd9ce0fff] [ 0.932107] pci 0000:00:02.0: supports D1 D2 [ 0.932109] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.936005] pci 0000:00:02.0: PME# disabled [ 0.940017] pci 0000:00:02.1: reg 10 32bit mmio: [0xd9cd0000-0xd9cd00ff] [ 0.940034] pci 0000:00:02.1: supports D1 D2 [ 0.940036] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.944004] pci 0000:00:02.1: PME# disabled [ 0.948033] pci 0000:00:06.0: reg 20 io port: [0x500-0x50f] [ 0.948074] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.952005] pci 0000:00:0c.0: PME# disabled [ 0.956026] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.960004] pci 0000:00:0d.0: PME# disabled [ 0.964023] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.968005] pci 0000:00:0e.0: PME# disabled [ 0.972258] pci 0000:01:03.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.972263] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff] [ 0.972268] pci 0000:01:03.0: reg 18 32bit mmio: [0xd9ef0000-0xd9efffff] [ 0.972281] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.972294] pci 0000:01:03.0: supports D1 D2 [ 0.972317] pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff] [ 0.972322] pci 0000:01:04.0: reg 14 32bit mmio: [0xd9ee0000-0xd9ee01ff] [ 0.972348] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold [ 0.976005] pci 0000:01:04.0: PME# disabled [ 0.980029] pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff] [ 0.980035] pci 0000:01:04.2: reg 14 32bit mmio: [0xd9ed0000-0xd9ed07ff] [ 0.980041] pci 0000:01:04.2: reg 18 32bit mmio: [0xd9ec0000-0xd9ec3fff] [ 0.980047] pci 0000:01:04.2: reg 1c 32bit mmio: [0xd9e00000-0xd9e7ffff] [ 0.980059] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.980073] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold [ 0.984006] pci 0000:01:04.2: PME# disabled [ 0.988042] pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f] [ 0.988063] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold [ 0.992005] pci 0000:01:04.4: PME# disabled [ 0.996027] pci 0000:01:04.6: reg 10 32bit mmio: [0xd9df0000-0xd9df00ff] [ 0.996055] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold [ 1.000006] pci 0000:01:04.6: PME# disabled [ 1.004029] pci 0000:00:09.0: transparent bridge [ 1.008004] pci 0000:00:09.0: bridge io port: [0x1000-0x2fff] [ 1.008007] pci 0000:00:09.0: bridge 32bit mmio: [0xd9d00000-0xd9efffff] [ 1.008010] pci 0000:00:09.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 1.008115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.008202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] [ 1.008317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] [ 1.008428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT] [ 1.008537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT] [ 1.012209] ACPI: PCI Root Bridge [PCI1] (0000:40) [ 1.016128] pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.020005] pci 0000:40:0b.0: PME# disabled [ 1.024036] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.028004] pci 0000:40:0c.0: PME# disabled [ 1.032035] pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.036006] pci 0000:40:0d.0: PME# disabled [ 1.040035] pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.044004] pci 0000:40:0e.0: PME# disabled [ 1.048035] pci 0000:40:10.0: Enabling HT MSI Mapping [ 1.052069] pci 0000:40:11.0: Enabling HT MSI Mapping [ 1.056207] pci 0000:41:01.0: reg 10 64bit mmio: [0xdc000000-0xddffffff] [ 1.056220] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 1.056234] pci 0000:41:01.0: PME# supported from D3hot D3cold [ 1.060005] pci 0000:41:01.0: PME# disabled [ 1.064029] pci 0000:41:02.0: reg 10 64bit mmio: [0xda000000-0xdbffffff] [ 1.064042] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 1.064056] pci 0000:41:02.0: PME# supported from D3hot D3cold [ 1.068005] pci 0000:41:02.0: PME# disabled [ 1.072027] pci 0000:40:10.0: bridge 32bit mmio: [0xda000000-0xddffffff] [ 1.072058] pci 0000:42:01.0: reg 10 io port: [0x3000-0x30ff] [ 1.072064] pci 0000:42:01.0: reg 14 64bit mmio: [0xdfef0000-0xdfef3fff] [ 1.072070] pci 0000:42:01.0: reg 1c 64bit mmio: [0xdfee0000-0xdfeeffff] [ 1.072077] pci 0000:42:01.0: reg 30 32bit mmio: [0x000000-0x1fffff] [ 1.072091] pci 0000:42:01.0: supports D1 D2 [ 1.072116] pci 0000:40:11.0: bridge io port: [0x3000-0x3fff] [ 1.072119] pci 0000:40:11.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] [ 1.072139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT] [ 1.072211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT] [ 1.072380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] [ 1.072504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] [ 1.072629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT] [ 1.072747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT] [ 1.076095] ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled. [ 1.084770] ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled. [ 1.093245] ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled. [ 1.100319] ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled. [ 1.108318] ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5 [ 1.116204] ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *10 [ 1.121362] ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled. [ 1.129221] ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. [ 1.136322] ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. [ 1.144913] ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. [ 1.156163] usbcore: registered new interface driver usbfs [ 1.160027] usbcore: registered new interface driver hub [ 1.164021] usbcore: registered new device driver usb [ 1.168025] PCI: Using ACPI for IRQ routing [ 1.172132] Expanded resource reserved due to conflict with PCI Bus #00 [ 1.176004] Expanded resource reserved due to conflict with PCI Bus #00 [ 1.192120] PCI-DMA: Disabling AGP. [ 1.196136] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 1.200004] PCI-DMA: using GART IOMMU. [ 1.204007] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.208716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 1.216294] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 1.240013] Switched to high resolution mode on CPU 0 [ 1.240534] Switched to high resolution mode on CPU 4 [ 1.240651] Switched to high resolution mode on CPU 2 [ 1.240657] Switched to high resolution mode on CPU 6 [ 1.240671] Switched to high resolution mode on CPU 1 [ 1.240680] Switched to high resolution mode on CPU 5 [ 1.240776] Switched to high resolution mode on CPU 3 [ 1.240786] Switched to high resolution mode on CPU 7 [ 1.252009] pnp: PnP ACPI init [ 1.259945] ACPI: bus type pnp registered [ 1.275962] pnp: PnP ACPI: found 16 devices [ 1.300061] ACPI: ACPI bus type pnp unregistered [ 1.323407] system 00:01: ioport range 0x408-0x40f has been reserved [ 1.327729] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.352071] system 00:01: ioport range 0x700-0x73f has been reserved [ 1.366071] system 00:01: ioport range 0x800-0x8fe has been reserved [ 1.392146] system 00:01: ioport range 0x900-0x9fe has been reserved [ 1.401416] system 00:01: ioport range 0x9ff-0x9ff has been reserved [ 1.414069] system 00:01: ioport range 0xa00-0xafe has been reserved [ 1.419672] system 00:01: ioport range 0xaff-0xaff has been reserved [ 1.447071] system 00:01: ioport range 0xb00-0xbfe has been reserved [ 1.459083] system 00:01: ioport range 0xbff-0xbff has been reserved [ 1.463812] system 00:01: ioport range 0xc80-0xc83 has been reserved [ 1.488103] system 00:01: ioport range 0xcd4-0xcd7 has been reserved [ 1.502073] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved [ 1.512485] system 00:01: ioport range 0xf50-0xf58 has been reserved [ 1.526071] system 00:01: ioport range 0xca0-0xca1 has been reserved [ 1.539968] system 00:01: ioport range 0xca4-0xca5 has been reserved [ 1.545651] system 00:01: ioport range 0xc00-0xc03 has been reserved [ 1.562813] system 00:01: ioport range 0x2f8-0x2ff has been reserved [ 1.587064] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 1.597089] pci 0000:00:09.0: IO window: 0x1000-0x2fff [ 1.610647] pci 0000:00:09.0: MEM window: 0xd9d00000-0xd9efffff [ 1.621088] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 1.631228] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08 [ 1.640245] pci 0000:00:0c.0: IO window: disabled [ 1.656076] pci 0000:00:0c.0: MEM window: disabled [ 1.673086] pci 0000:00:0c.0: PREFETCH window: disabled [ 1.683910] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05 [ 1.707095] pci 0000:00:0d.0: IO window: disabled [ 1.717532] pci 0000:00:0d.0: MEM window: disabled [ 1.728296] pci 0000:00:0d.0: PREFETCH window: disabled [ 1.737849] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 [ 1.748115] pci 0000:00:0e.0: IO window: disabled [ 1.760376] pci 0000:00:0e.0: MEM window: disabled [ 1.777083] pci 0000:00:0e.0: PREFETCH window: disabled [ 1.796093] pci 0000:00:09.0: setting latency timer to 64 [ 1.796097] pci 0000:00:0c.0: setting latency timer to 64 [ 1.796101] pci 0000:00:0d.0: setting latency timer to 64 [ 1.796104] pci 0000:00:0e.0: setting latency timer to 64 [ 1.796111] pci 0000:40:0b.0: PCI bridge, secondary bus 0000:4f [ 1.806093] pci 0000:40:0b.0: IO window: disabled [ 1.825905] pci 0000:40:0b.0: MEM window: disabled [ 1.842125] pci 0000:40:0b.0: PREFETCH window: disabled [ 1.852091] pci 0000:40:0c.0: PCI bridge, secondary bus 0000:4c [ 1.857471] pci 0000:40:0c.0: IO window: disabled [ 1.875603] pci 0000:40:0c.0: MEM window: disabled [ 1.891130] pci 0000:40:0c.0: PREFETCH window: disabled [ 1.899087] pci 0000:40:0d.0: PCI bridge, secondary bus 0000:49 [ 1.911128] pci 0000:40:0d.0: IO window: disabled [ 1.928100] pci 0000:40:0d.0: MEM window: disabled [ 1.957127] pci 0000:40:0d.0: PREFETCH window: disabled [ 1.976079] pci 0000:40:0e.0: PCI bridge, secondary bus 0000:46 [ 2.000745] pci 0000:40:0e.0: IO window: disabled [ 2.016108] pci 0000:40:0e.0: MEM window: disabled [ 2.021138] pci 0000:40:0e.0: PREFETCH window: disabled [ 2.036499] pci 0000:40:10.0: PCI bridge, secondary bus 0000:41 [ 2.046327] pci 0000:40:10.0: IO window: disabled [ 2.052081] pci 0000:40:10.0: MEM window: 0xda000000-0xddffffff [ 2.075985] pci 0000:40:10.0: PREFETCH window: 0x000000d9f00000-0x000000d9ffffff [ 2.107248] pci 0000:40:11.0: PCI bridge, secondary bus 0000:42 [ 2.123539] pci 0000:40:11.0: IO window: 0x3000-0x3fff [ 2.130107] pci 0000:40:11.0: MEM window: 0xdfe00000-0xdfefffff [ 2.134652] pci 0000:40:11.0: PREFETCH window: 0x000000de000000-0x000000de1fffff [ 2.153384] pci 0000:40:0b.0: setting latency timer to 64 [ 2.153389] pci 0000:40:0c.0: setting latency timer to 64 [ 2.153393] pci 0000:40:0d.0: setting latency timer to 64 [ 2.153398] pci 0000:40:0e.0: setting latency timer to 64 [ 2.153405] pci_bus 0000:00: resource 0 io: [0x00-0x2fff] [ 2.153408] pci_bus 0000:00: resource 1 mem: [0x80000000-0xd9efffff] [ 2.153410] pci_bus 0000:00: resource 2 mem: [0xdff00000-0xe3ffffff] [ 2.153412] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff] [ 2.153414] pci_bus 0000:00: resource 4 mem: [0xe8000000-0xffffffff] [ 2.153416] pci_bus 0000:00: resource 5 mem: [0x480000000-0xfcffffffff] [ 2.153419] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff] [ 2.153421] pci_bus 0000:01: resource 1 mem: [0xd9d00000-0xd9efffff] [ 2.153423] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] [ 2.153426] pci_bus 0000:01: resource 3 io: [0x00-0x2fff] [ 2.153428] pci_bus 0000:01: resource 4 mem: [0x80000000-0xd9efffff] [ 2.153430] pci_bus 0000:01: resource 5 mem: [0xdff00000-0xe3ffffff] [ 2.153432] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff] [ 2.153434] pci_bus 0000:01: resource 7 mem: [0xe8000000-0xffffffff] [ 2.153436] pci_bus 0000:01: resource 8 mem: [0x480000000-0xfcffffffff] [ 2.153439] pci_bus 0000:40: resource 0 io: [0x3000-0xffff] [ 2.153442] pci_bus 0000:40: resource 1 mem: [0xd9f00000-0xdfefffff] [ 2.153444] pci_bus 0000:40: resource 2 mem: [0xe4000000-0xe7ffffff] [ 2.153447] pci_bus 0000:41: resource 1 mem: [0xda000000-0xddffffff] [ 2.153449] pci_bus 0000:41: resource 2 pref mem [0xd9f00000-0xd9ffffff] [ 2.153451] pci_bus 0000:42: resource 0 io: [0x3000-0x3fff] [ 2.153453] pci_bus 0000:42: resource 1 mem: [0xdfe00000-0xdfefffff] [ 2.153456] pci_bus 0000:42: resource 2 pref mem [0xde000000-0xde1fffff] [ 2.153676] NET: Registered protocol family 2 [ 2.216591] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.240910] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.268092] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.284775] TCP: Hash tables configured (established 524288 bind 65536) [ 2.290779] TCP reno registered [ 2.320308] NET: Registered protocol family 1 [ 2.335011] Trying to unpack rootfs image as initramfs... [ 2.559899] Freeing initrd memory: 7069k freed [ 2.571069] audit: initializing netlink socket (disabled) [ 2.580181] type=2000 audit(1246298742.580:1): initialized [ 2.589988] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.608256] VFS: Disk quotas dquot_6.5.2 [ 2.618182] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.630420] msgmni has been set to 32173 [ 2.635955] alg: No test for stdrng (krng) [ 2.648339] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.661790] io scheduler noop registered [ 2.668389] io scheduler anticipatory registered [ 2.682139] io scheduler deadline registered [ 2.688765] io scheduler cfq registered (default) [ 2.724026] pci 0000:00:0c.0: Found enabled HT MSI Mapping [ 2.743145] pci 0000:00:0d.0: Found enabled HT MSI Mapping [ 2.764138] pci 0000:00:0e.0: Found enabled HT MSI Mapping [ 2.786649] pci 0000:01:03.0: Boot video device [ 2.786667] pci 0000:01:04.4: HCRESET not completed yet! [ 2.811601] pci 0000:40:0b.0: Found enabled HT MSI Mapping [ 2.820927] pci 0000:40:0c.0: Found enabled HT MSI Mapping [ 2.836474] pci 0000:40:0d.0: Found enabled HT MSI Mapping [ 2.857123] pci 0000:40:0e.0: Found enabled HT MSI Mapping [ 2.885790] alloc irq_desc for 62 on cpu 0 node 0 [ 2.885793] alloc kstat_irqs on cpu 0 node 0 [ 2.885803] pcieport-driver 0000:00:0c.0: irq 62 for MSI/MSI-X [ 2.885809] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 2.885946] alloc irq_desc for 63 on cpu 0 node 0 [ 2.885948] alloc kstat_irqs on cpu 0 node 0 [ 2.885954] pcieport-driver 0000:00:0d.0: irq 63 for MSI/MSI-X [ 2.885958] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 2.886074] alloc irq_desc for 64 on cpu 0 node 0 [ 2.886076] alloc kstat_irqs on cpu 0 node 0 [ 2.886082] pcieport-driver 0000:00:0e.0: irq 64 for MSI/MSI-X [ 2.886086] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 2.886244] alloc irq_desc for 65 on cpu 0 node 0 [ 2.886247] alloc kstat_irqs on cpu 0 node 0 [ 2.886262] pcieport-driver 0000:40:0b.0: irq 65 for MSI/MSI-X [ 2.886270] pcieport-driver 0000:40:0b.0: setting latency timer to 64 [ 2.886467] alloc irq_desc for 66 on cpu 0 node 0 [ 2.886469] alloc kstat_irqs on cpu 0 node 0 [ 2.886476] pcieport-driver 0000:40:0c.0: irq 66 for MSI/MSI-X [ 2.886482] pcieport-driver 0000:40:0c.0: setting latency timer to 64 [ 2.886622] alloc irq_desc for 67 on cpu 0 node 0 [ 2.886624] alloc kstat_irqs on cpu 0 node 0 [ 2.886630] pcieport-driver 0000:40:0d.0: irq 67 for MSI/MSI-X [ 2.886636] pcieport-driver 0000:40:0d.0: setting latency timer to 64 [ 2.886776] alloc irq_desc for 68 on cpu 0 node 0 [ 2.886778] alloc kstat_irqs on cpu 0 node 0 [ 2.886784] pcieport-driver 0000:40:0e.0: irq 68 for MSI/MSI-X [ 2.886790] pcieport-driver 0000:40:0e.0: setting latency timer to 64 [ 2.891850] Linux agpgart interface v0.103 [ 2.905820] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.919168] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.933852] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.944558] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.954750] brd: module loaded [ 2.965735] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 2.987452] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 3.025405] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.032848] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.044874] mice: PS/2 mouse device common for all mice [ 3.050242] rtc_cmos 00:0a: RTC can wake from S4 [ 3.070847] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 [ 3.104357] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 3.131198] cpuidle: using governor ladder [ 3.151453] cpuidle: using governor menu [ 3.167598] No iBFT detected. [ 3.172537] TCP cubic registered [ 3.188654] NET: Registered protocol family 10 [ 3.191750] lo: Disabled Privacy Extensions [ 3.201566] Mobile IPv6 [ 3.203098] NET: Registered protocol family 17 [ 3.231423] registered taskstats version 1 [ 3.242452] rtc_cmos 00:0a: setting system clock to 2009-06-29 18:05:46 UTC (1246298746) [ 3.266278] Freeing unused kernel memory: 560k freed [ 3.284574] Write protecting the kernel read-only data: 3792k [ 3.490537] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.492146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.499753] Uniform Multi-Platform E-IDE driver [ 3.508979] uhci_hcd: USB Universal Host Controller Interface driver [ 3.579988] SCSI subsystem initialized [ 3.585360] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 [ 3.585365] alloc irq_desc for 23 on cpu 0 node 0 [ 3.585367] alloc kstat_irqs on cpu 0 node 0 [ 3.585377] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23 [ 3.639185] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 3.639188] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 3.646269] Fusion MPT base driver 3.04.07 [ 3.646272] Copyright (c) 1999-2008 LSI Corporation [ 3.652981] Fusion MPT SAS Host driver 3.04.07 [ 3.677142] alloc irq_desc for 24 on cpu 0 node 0 [ 3.677146] alloc kstat_irqs on cpu 0 node 0 [ 3.677160] mptsas 0000:42:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 3.744225] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.1 (May 6, 2009) [ 3.744322] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 3.744364] ehci_hcd 0000:00:02.1: debug port 1 [ 3.744367] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 3.744385] ehci_hcd 0000:00:02.1: irq 23, io mem 0xd9cd0000 [ 3.744610] ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 [ 3.744612] alloc irq_desc for 17 on cpu 0 node 0 [ 3.744614] alloc kstat_irqs on cpu 0 node 0 [ 3.744619] uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 [ 3.744628] uhci_hcd 0000:01:04.4: UHCI Host Controller [ 3.744681] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 2 [ 3.744693] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports [ 3.744704] uhci_hcd 0000:01:04.4: HCRESET not completed yet! [ 3.744722] uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 [ 3.744769] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.744771] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.744774] usb usb2: Product: UHCI Host Controller [ 3.744775] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 3.744777] usb usb2: SerialNumber: 0000:01:04.4 [ 3.744824] usb usb2: configuration #1 chosen from 1 choice [ 3.744852] hub 2-0:1.0: USB hub found [ 3.744860] hub 2-0:1.0: 2 ports detected [ 3.756014] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 3.756041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.756044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.756046] usb usb1: Product: EHCI Host Controller [ 3.756047] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd [ 3.756049] usb usb1: SerialNumber: 0000:00:02.1 [ 3.756121] usb usb1: configuration #1 chosen from 1 choice [ 3.756151] hub 1-0:1.0: USB hub found [ 3.756161] hub 1-0:1.0: 10 ports detected [ 3.756681] amd74xx 0000:00:06.0: UDMA133 controller [ 3.756684] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xa3) [ 3.756698] amd74xx 0000:00:06.0: IDE port disabled [ 3.756708] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later [ 3.756714] ide0: BM-DMA at 0x0500-0x0507 [ 3.756720] Probing IDE interface ide0... [ 4.057262] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 4.205037] usb 2-1: New USB device found, idVendor=03f0, idProduct=1027 [ 4.205041] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.205043] usb 2-1: Product: Virtual Keyboard [ 4.205045] usb 2-1: Manufacturer: HP [ 4.205150] usb 2-1: configuration #1 chosen from 1 choice [ 4.223553] usbcore: registered new interface driver hiddev [ 4.228111] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.0/input/input1 [ 4.228176] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 [ 4.234646] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.1/input/input2 [ 4.234715] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 [ 4.234743] usbcore: registered new interface driver usbhid [ 4.234746] usbhid: v2.6:USB HID core driver [ 4.325764] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 4.472993] usb 2-2: New USB device found, idVendor=03f0, idProduct=1327 [ 4.472996] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.472998] usb 2-2: Product: Virtual Hub [ 4.472999] usb 2-2: Manufacturer: HP [ 4.473114] usb 2-2: configuration #1 chosen from 1 choice [ 4.478403] hub 2-2:1.0: USB hub found [ 4.480601] hub 2-2:1.0: 7 ports detected [ 4.496121] hda: TEAC DV-W28ECW, ATAPI CD/DVD-ROM drive [ 4.609765] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 4.742159] usb 1-6: New USB device found, idVendor=04b4, idProduct=6560 [ 4.742161] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.742233] usb 1-6: configuration #1 chosen from 1 choice [ 4.742793] hub 1-6:1.0: USB hub found [ 4.743222] hub 1-6:1.0: 4 ports detected [ 4.812274] alloc irq_desc for 31 on cpu 0 node 0 [ 4.812277] alloc kstat_irqs on cpu 0 node 0 [ 4.812283] bnx2 0000:41:01.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 [ 4.832125] mptbase: ioc0: Initiating bringup [ 5.012165] usb 1-6.3: new full speed USB device using ehci_hcd and address 3 [ 5.121781] usb 1-6.3: New USB device found, idVendor=0e34, idProduct=0204 [ 5.142889] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.158573] usb 1-6.3: Product: iPort/USB I2C Host Adapter [ 5.168062] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 5.169847] usb 1-6.3: Manufacturer: Silicon Labs [ 5.169888] hda: MWDMA2 mode selected [ 5.172757] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.173191] ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 [ 5.173195] alloc irq_desc for 22 on cpu 0 node 0 [ 5.173197] alloc kstat_irqs on cpu 0 node 0 [ 5.173205] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22 [ 5.215509] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 5.215513] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 5.215519] usb 1-6.3: SerialNumber: 0001248 [ 5.215628] usb 1-6.3: configuration #1 chosen from 1 choice [ 5.266292] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 5.273376] ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ce0000 [ 5.344290] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw [ 5.346011] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.346013] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.346015] usb usb3: Product: OHCI Host Controller [ 5.346017] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd [ 5.346018] usb usb3: SerialNumber: 0000:00:02.0 [ 5.346073] usb usb3: configuration #1 chosen from 1 choice [ 5.346106] hub 3-0:1.0: USB hub found [ 5.346114] hub 3-0:1.0: 10 ports detected [ 5.360683] libata version 3.00 loaded. [ 5.374863] ide-cd driver 5.00 [ 5.377693] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache [ 5.377700] Uniform CD-ROM driver Revision: 3.20 [ 5.486328] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw [ 5.520834] eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 31, node addr 00:1b:78:be:d1:50 [ 5.539237] alloc irq_desc for 32 on cpu 0 node 0 [ 5.539241] alloc kstat_irqs on cpu 0 node 0 [ 5.539253] bnx2 0000:41:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 [ 5.768011] ioc0: LSISAS1068 B0: Capabilities={Initiator} [ 5.780002] alloc irq_desc for 69 on cpu 0 node 0 [ 5.780005] alloc kstat_irqs on cpu 0 node 0 [ 5.780014] mptsas 0000:42:01.0: irq 69 for MSI/MSI-X [ 5.780020] mptbase: ioc0: PCI-MSI enabled [ 6.044014] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw [ 6.059125] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw [ 6.071810] eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 32, node addr 00:1b:78:be:d1:52 [ 29.222937] scsi0 : ioc0: LSISAS1068 B0, FwRev=01142100h, Ports=1, MaxQ=511, IRQ=69 [ 29.296633] scsi 0:0:0:0: Direct-Access HP DG036A9BB6 HPD0 PQ: 0 ANSI: 5 [ 29.314866] scsi 0:0:1:0: Direct-Access HP DG036A9BB6 HPD0 PQ: 0 ANSI: 5 [ 29.342360] scsi 0:0:2:0: Direct-Access HP DG036A9BB6 HPD0 PQ: 0 ANSI: 5 [ 29.363867] scsi 0:0:3:0: Direct-Access HP DG036A9BB6 HPD0 PQ: 0 ANSI: 5 [ 29.411386] scsi 0:0:4:0: Direct-Access HP DG072A8B54 HPD7 PQ: 0 ANSI: 5 [ 29.441924] scsi 0:0:5:0: Direct-Access HP DG072A8B54 HPD7 PQ: 0 ANSI: 5 [ 29.457296] scsi 0:0:6:0: Direct-Access HP DG072A8B54 HPD7 PQ: 0 ANSI: 5 [ 29.495441] scsi 0:0:7:0: Direct-Access HP DG072A8B54 HPD7 PQ: 0 ANSI: 5 [ 29.556254] Driver 'sd' needs updating - please use bus_type methods [ 29.664676] sd 0:0:1:0: [sdb] 71132960 512-byte hardware sectors: (36.4 GB/33.9 GiB) [ 29.666802] sd 0:0:3:0: [sdd] 71132960 512-byte hardware sectors: (36.4 GB/33.9 GiB) [ 29.697036] sd 0:0:4:0: [sde] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB) [ 29.728553] sd 0:0:5:0: [sdf] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB) [ 29.728558] sd 0:0:3:0: [sdd] Write Protect is off [ 29.728561] sd 0:0:3:0: [sdd] Mode Sense: cf 00 10 08 [ 29.728575] sd 0:0:2:0: [sdc] 71132960 512-byte hardware sectors: (36.4 GB/33.9 GiB) [ 29.730641] sd 0:0:6:0: [sdg] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB) [ 29.730938] sd 0:0:7:0: [sdh] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB) [ 29.731696] sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 29.731779] sd 0:0:5:0: [sdf] Write Protect is off [ 29.731782] sd 0:0:5:0: [sdf] Mode Sense: db 00 10 08 [ 29.731834] sd 0:0:6:0: [sdg] Write Protect is off [ 29.731836] sd 0:0:6:0: [sdg] Mode Sense: db 00 10 08 [ 29.732090] sd 0:0:2:0: [sdc] Write Protect is off [ 29.732093] sd 0:0:2:0: [sdc] Mode Sense: cf 00 10 08 [ 29.732138] sd 0:0:7:0: [sdh] Write Protect is off [ 29.732140] sd 0:0:7:0: [sdh] Mode Sense: db 00 10 08 [ 29.753976] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 29.754053] sd 0:0:5:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 29.754085] sd 0:0:6:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 29.754119] sd 0:0:7:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 29.812019] sd 0:0:1:0: [sdb] Write Protect is off [ 29.812022] sd 0:0:1:0: [sdb] Mode Sense: cf 00 10 08 [ 29.860582] sd 0:0:0:0: [sda] 71132960 512-byte hardware sectors: (36.4 GB/33.9 GiB) [ 29.860701] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 29.880227] sdd:<5>sd 0:0:0:0: [sda] Write Protect is off [ 29.880306] sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08 [ 29.883565] sdc:<5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 29.883719] sdf:<6> sdh:<6> sdg: sdf1 sdf2 < sdh1 [ 30.071769] sdf5<5>sd 0:0:4:0: [sde] Write Protect is off [ 30.072981] sd 0:0:4:0: [sde] Mode Sense: db 00 10 08 [ 30.074235] sd 0:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 30.105095] > [ 30.113641] sd 0:0:5:0: [sdf] Attached SCSI disk [ 30.113740] unknown partition table [ 30.131057] unknown partition table [ 30.131094] sd 0:0:2:0: [sdc] Attached SCSI disk [ 30.154406] unknown partition table [ 30.154484] sd 0:0:6:0: [sdg] Attached SCSI disk [ 30.180268] sdb:<5>sd 0:0:3:0: [sdd] Attached SCSI disk [ 30.184435] sda:<6> sde:<5>sd 0:0:7:0: [sdh] Attached SCSI disk [ 30.192642] unknown partition table [ 30.198842] sd 0:0:4:0: [sde] Attached SCSI disk [ 30.202296] unknown partition table [ 30.220308] unknown partition table [ 30.230477] sd 0:0:1:0: [sdb] Attached SCSI disk [ 30.230487] sd 0:0:0:0: [sda] Attached SCSI disk [ 30.549750] kjournald starting. Commit interval 5 seconds [ 30.549761] EXT3-fs: mounted filesystem with ordered data mode. [ 31.563227] udevd version 125 started [ 31.783207] processor ACPI_CPU:00: registered as cooling_device0 [ 31.817509] processor ACPI_CPU:01: registered as cooling_device1 [ 31.840427] processor ACPI_CPU:02: registered as cooling_device2 [ 31.864447] processor ACPI_CPU:03: registered as cooling_device3 [ 31.881888] processor ACPI_CPU:04: registered as cooling_device4 [ 31.892415] processor ACPI_CPU:05: registered as cooling_device5 [ 31.920656] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 31.929392] ACPI: Power Button [PWRF] [ 32.059445] processor ACPI_CPU:06: registered as cooling_device6 [ 32.072447] processor ACPI_CPU:07: registered as cooling_device7 [ 32.100727] ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 [ 32.106751] alloc irq_desc for 16 on cpu 0 node 0 [ 32.106753] alloc kstat_irqs on cpu 0 node 0 [ 32.106765] hpwdt 0000:01:04.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 [ 32.120410] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 32.140487] hpwdt: New timer passed in is 30 seconds. [ 32.140579] hp Watchdog Timer Driver: 1.01, timer margin: 30 seconds (nowayout=0), allow kernel dump: OFF (default = 0/OFF). [ 32.172730] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 32.177669] ipmi message handler version 39.2 [ 32.197749] hpilo 0000:01:04.2: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 [ 32.226048] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 [ 32.235396] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 32.258757] IPMI System Interface driver. [ 32.258763] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 32.338247] k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141 [ 32.368614] k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141 [ 32.399510] shpchp 0000:40:10.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 [ 32.442486] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) [ 32.442497] IPMI kcs interface initialized [ 32.442515] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 32.442517] ipmi_si: duplicate interface [ 32.459875] Error: Driver 'pcspkr' is already registered, aborting... [ 32.501944] shpchp 0000:40:10.0: Cannot reserve MMIO region [ 32.517027] shpchp 0000:40:11.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 [ 32.527449] shpchp 0000:40:11.0: Cannot reserve MMIO region [ 32.559523] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.577017] ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 [ 32.590592] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xd9df0000, slave address 0x0, irq 16 [ 32.744014] IRQ 16/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs [ 32.775035] Using irq 16 [ 32.961441] ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) [ 32.988462] IPMI kcs interface initialized [ 34.246613] Adding 2963952k swap on /dev/sdf5. Priority:-1 extents:1 across:2963952k [ 34.584576] EXT3 FS on sdf1, internal journal [ 35.306670] loop: module loaded [ 36.941235] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.127866] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex [ 40.155925] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 50.332009] eth0: no IPv6 routers present -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/