Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 3 Dec 2000 20:07:07 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 3 Dec 2000 20:06:57 -0500 Received: from vger.timpanogas.org ([207.109.151.240]:65031 "EHLO vger.timpanogas.org") by vger.kernel.org with ESMTP id ; Sun, 3 Dec 2000 20:06:44 -0500 Date: Sun, 3 Dec 2000 18:32:36 -0700 From: "Jeff V. Merkey" To: linux-kernel@vger.kernel.org Subject: Re: 2.4.0-11 AIC7xxx.o driver barfs on AHA27XX adapter Message-ID: <20001203183236.A24895@vger.timpanogas.org> In-Reply-To: <20001203181524.A24809@vger.timpanogas.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001203181524.A24809@vger.timpanogas.org>; from jmerkey@vger.timpanogas.org on Sun, Dec 03, 2000 at 06:15:24PM -0700 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Sun, Dec 03, 2000 at 06:15:24PM -0700, Jeff V. Merkey wrote: > > > On a four processor POCA system with dual Fast-SCSI AHA274X/VLB bus > controllers I am seeing the following timeout errors right after > the sequencer scripts are downloaded and the driver starts polling. > It does not happen when compiled in kernel, only when loaded from > an initrd image. The root FS is getting mounted properly and > probing and loading the driver. > > aborting command due to timeout: pid 00 scsi 00 channel 00 lun 00 > inquiry 00 00 00 ff 00 > > The machine then hard hangs after it gets this error and has to be > powered off in order to reboot it. I tested 2.2.18-24 with an initrd and works fine on the same hardware, BTW Jeff > > Jeff > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/