Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 9 Mar 2002 03:15:03 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 9 Mar 2002 03:14:53 -0500 Received: from smtp-out-2.wanadoo.fr ([193.252.19.254]:656 "EHLO mel-rto2.wanadoo.fr") by vger.kernel.org with ESMTP id ; Sat, 9 Mar 2002 03:14:34 -0500 Message-ID: <3C89C3D4.3070004@wanadoo.fr> Date: Sat, 09 Mar 2002 09:12:04 +0100 From: Pierre Rousselet User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.9) Gecko/20020304 X-Accept-Language: en-us, en MIME-Version: 1.0 To: lkml Subject: 2.5.6-pre3 boot hangs in ide probing Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org The motherboard is abit BE6 (4 ide, piix and hpt366) with a pIII coppermine. For reference below is dmesg with a booting 2.5.6-pre2. booting 2.5.6-pre3 hangs at : ........ Partition check: /dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4 /dev/ide/host3/bus0/target0/lun0: ........ with hdg=noprobe, and even after un-plugging hdg, 2.5.6-pre3 hangs at : ........ ide2 at 0xcc00-0xcc07,0xd002 on irq 11 ide3 at 0xd800-0xd807,0xdc02 on irq 11 blk: queue c0255658, I/O limit 4095Mb (mask 0xffffffff) ........ (2.5.6-pre2)# dmesg ........ Uniform Multi-Platform E-IDE driver ver.:7.0.0 ide: system bus speed 33MHz PCI device 8086:7111: IDE controller on PCI slot 00:07.1 PCI device 8086:7111: chipset revision 1 PCI device 8086:7111: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio PCI device 1103:0004: onboard version of chipset, pin1=1 pin2=2 PCI device 1103:0004: IDE controller on PCI slot 00:13.0 PCI: Found IRQ 11 for device 00:13.0 PCI: Sharing IRQ 11 with 00:13.1 PCI device 1103:0004: chipset revision 1 PCI device 1103:0004: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio PCI device 1103:0004: IDE controller on PCI slot 00:13.1 PCI: Found IRQ 11 for device 00:13.1 PCI: Sharing IRQ 11 with 00:13.0 PCI device 1103:0004: chipset revision 1 PCI device 1103:0004: not 100% native mode: will probe irqs later ide3: BM-DMA at 0xe000-0xe007, BIOS settings: hdg:pio, hdh:pio hdc: SAMSUNG DVD-ROM SD-616F, ATAPI CD/DVD-ROM drive hde: ST310212A, ATA DISK drive hdg: SAMSUNG SV0322A, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xcc00-0xcc07,0xd002 on irq 11 ide3 at 0xd800-0xd807,0xdc02 on irq 11 blk: queue c0255658, I/O limit 4095Mb (mask 0xffffffff) hde: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=19846/16/63, UDMA(66) blk: queue c0255c50, I/O limit 4095Mb (mask 0xffffffff) hdg: 6250608 sectors (3200 MB) w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check: /dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4 /dev/ide/host3/bus0/target0/lun0: p1 ....... Pierre -- ------------------------------------------------ Pierre Rousselet ------------------------------------------------ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/