Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 10 Mar 2002 19:59:33 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 10 Mar 2002 19:59:23 -0500 Received: from coffee.Psychology.McMaster.CA ([130.113.218.59]:58829 "EHLO coffee.psychology.mcmaster.ca") by vger.kernel.org with ESMTP id ; Sun, 10 Mar 2002 19:59:06 -0500 Date: Sun, 10 Mar 2002 20:01:45 -0500 (EST) From: Mark Hahn X-X-Sender: To: Derek J Witt cc: Subject: Re: Suspend support for IDE In-Reply-To: <009501c1c895$f9008e10$d3c02740@flinthills.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org > I suppose risking screwing up the IDE cable just to get it to reach or fit > properly in a mid-tower isn't worth losing data via CRC errors... uh, that's an oxymoron - you specifically don't lose data because of CRC checking. > I now have this IDE setup: > > Primary master: Quantum Fireball SE6.4A > Primary slave: Western Digital WDC AC36400L > Secondary master: Acer ATAPI CD-ROM 40x N0AP > Secondary slave: Acer ATAPI CD-RW 2x6x CRW6206A. it's fairly common to have drives from different vendors, especially oldish ones, not get along as master/slave. > working just fine even with dma enabled. I'm using an ATA66 cable for the > hard drives. not to be *too* persnickety, but there's no such thing as "ata66 cable", just 40 or 80-conductor... - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/