Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752318AbZGIWjS (ORCPT ); Thu, 9 Jul 2009 18:39:18 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751108AbZGIWjI (ORCPT ); Thu, 9 Jul 2009 18:39:08 -0400 Received: from mail.vyatta.com ([76.74.103.46]:37653 "EHLO mail.vyatta.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751017AbZGIWjD (ORCPT ); Thu, 9 Jul 2009 18:39:03 -0400 Date: Thu, 9 Jul 2009 15:38:55 -0700 From: Stephen Hemminger To: john stultz Cc: Thomas Gleixner , linux-kernel@vger.kernel.org Subject: Re: Clock incorrect on 2.6.31-rc2 Message-ID: <20090709153855.6230729e@nehalam> In-Reply-To: <1f1b08da0907091458r19ff62c6md4436c86baf9254d@mail.gmail.com> References: <20090709141000.584d199a@nehalam> <1f1b08da0907091458r19ff62c6md4436c86baf9254d@mail.gmail.com> Organization: Vyatta X-Mailer: Claws Mail 3.6.1 (GTK+ 2.16.1; x86_64-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 65126 Lines: 1042 On Thu, 9 Jul 2009 14:58:37 -0700 john stultz wrote: > On Thu, Jul 9, 2009 at 2:10 PM, Stephen Hemminger wrote: > > My system (desktop Ubuntu 9.0) runs fine with 2.6.30, but with 2.6.31-rc2 it does > > not keep time correctly. Also ntptime reports an error. > > Can you better describe how it does not keep time? Is time moving too > slow? too fast? The clock just seemed to stop, or be wildly stuck in past. > > Could you include output from the following commands with 2.6.31-rc2 > (and 2.6.30 if you have the time). > $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource > $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource > $ dmesg > $ ntpdc -c peers > $ ntpdc -c kerninfo $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource tsc hpet acpi_pm $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource tsc # ntpdc -c peers remote local st poll reach delay offset disp ======================================================================= *ussprometheus.r 192.168.1.3 2 128 377 0.09094 0.007730 0.06786 # ntpdc -c kerninfo pll offset: 0.005107 s pll frequency: 155.028 ppm maximum error: 0.219122 s estimated error: 0.007209 s status: 0001 pll pll time constant: 7 precision: 1e-06 s frequency tolerance: 500 ppm $ dmesg [ 0.000000] Linux version 2.6.31-rc2 (shemminger@nehalam) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #149 SMP Tue Jul 7 18:22:50 PDT 2009 [ 0.000000] Command line: root=/dev/sda1 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 1C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask E00000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000 [ 0.000000] 0100000000 - 01c0000000 page 2M [ 0.000000] kernel direct mapping tables up to 1c0000000 @ 13000-1b000 [ 0.000000] RAMDISK: 36c2e000 - 37fefab2 [ 0.000000] ACPI: RSDP 00000000000fb320 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bf780000 00044 (v01 121808 RSDT1124 20081218 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 121808 FACP1124 20081218 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7804b0 0B181 (v01 A1087 A1087001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf798000 00040 [ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 121808 APIC1124 20081218 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 121808 OEMMCFG 20081218 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 121808 OEMB1124 20081218 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 121808 OEMHPET 20081218 MSFT 00000097) [ 0.000000] ACPI: DMAR 00000000bf7980c0 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 121808 OEMOSFR 20081218 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79aa30 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001c0000000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000001c0000000 [ 0.000000] NODE_DATA [0000000000016000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 0000000000051fff] pages 38 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01c0000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001681e90] TEXT DATA BSS ==> [0001000000 - 0001681e90] [ 0.000000] #3 [0036c2e000 - 0037fefab2] RAMDISK ==> [0036c2e000 - 0037fefab2] [ 0.000000] #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000] [ 0.000000] #5 [0001682000 - 0001682290] BRK ==> [0001682000 - 0001682290] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000016000] PGTABLE ==> [0000013000 - 0000016000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff880028600000-ffff88002e5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001c0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x001c0000 [ 0.000000] On node 0 totalpages: 1570571 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 109 pages reserved [ 0.000000] DMA zone: 3806 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 763840 pages, LIFO batch:31 [ 0.000000] Normal zone: 12288 pages used for memmap [ 0.000000] Normal zone: 774144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 16 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000 [ 0.000000] PM: Registered nosave memory: 00000000bf798000 - 00000000bf7dc000 [ 0.000000] PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages at ffff880028054000, static data 75872 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1541790 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda1 ro [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 6089856k/7340032k available (3252k kernel code, 1057748k absent, 192428k reserved, 2135k data, 496k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] NR_IRQS:512 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2673.143 MHz processor. [ 0.003787] Console: colour VGA+ 80x25 [ 0.003788] console [tty0] enabled [ 0.019748] hpet clockevent registered [ 0.019751] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.019889] Calibrating delay loop (skipped), value calculated using timer frequency.. 5346.28 BogoMIPS (lpj=2673143) [ 0.020165] Security Framework initialized [ 0.020296] SELinux: Disabled at boot. [ 0.020835] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.022505] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.023266] Mount-cache hash table entries: 256 [ 0.023496] CPU: Physical Processor ID: 0 [ 0.023626] CPU: Processor Core ID: 0 [ 0.023764] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.023921] CPU: L2 cache: 256K [ 0.024050] CPU: L3 cache: 8192K [ 0.024179] CPU 0/0x0 -> Node 0 [ 0.024308] mce: CPU supports 9 MCE banks [ 0.024444] CPU0: Thermal monitoring enabled (TM1) [ 0.024577] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.024878] using mwait in idle threads. [ 0.025019] ACPI: Core revision 20090521 [ 0.176199] Setting APIC routing to flat [ 0.176774] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.186909] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.288738] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.299129] Initializing CPU#1 [ 0.359628] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337) [ 0.359633] CPU: Physical Processor ID: 0 [ 0.359634] CPU: Processor Core ID: 1 [ 0.359635] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.359637] CPU: L2 cache: 256K [ 0.359637] CPU: L3 cache: 8192K [ 0.359639] CPU 1/0x2 -> Node 0 [ 0.359641] mce: CPU supports 9 MCE banks [ 0.359648] CPU1: Thermal monitoring enabled (TM1) [ 0.359651] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.360205] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.360686] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.365442] Skipping synchronization checks as TSC is reliable. [ 0.365627] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.376116] Initializing CPU#2 [ 0.436590] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672339) [ 0.436595] CPU: Physical Processor ID: 0 [ 0.436596] CPU: Processor Core ID: 2 [ 0.436598] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.436599] CPU: L2 cache: 256K [ 0.436600] CPU: L3 cache: 8192K [ 0.436601] CPU 2/0x4 -> Node 0 [ 0.436603] mce: CPU supports 9 MCE banks [ 0.436611] CPU2: Thermal monitoring enabled (TM1) [ 0.436613] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.437168] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.437676] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.439521] Skipping synchronization checks as TSC is reliable. [ 0.439708] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.450195] Initializing CPU#3 [ 0.510554] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336) [ 0.510559] CPU: Physical Processor ID: 0 [ 0.510560] CPU: Processor Core ID: 3 [ 0.510562] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.510563] CPU: L2 cache: 256K [ 0.510564] CPU: L3 cache: 8192K [ 0.510565] CPU 3/0x6 -> Node 0 [ 0.510567] mce: CPU supports 9 MCE banks [ 0.510575] CPU3: Thermal monitoring enabled (TM1) [ 0.510577] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.511132] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.511661] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.516579] Skipping synchronization checks as TSC is reliable. [ 0.516761] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.527249] Initializing CPU#4 [ 0.587516] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672335) [ 0.587522] CPU: Physical Processor ID: 0 [ 0.587523] CPU: Processor Core ID: 0 [ 0.587525] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.587527] CPU: L2 cache: 256K [ 0.587528] CPU: L3 cache: 8192K [ 0.587530] CPU 4/0x1 -> Node 0 [ 0.587532] mce: CPU supports 9 MCE banks [ 0.587540] CPU4: Thermal monitoring enabled (TM1) [ 0.587542] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.588201] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.588929] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.590777] Skipping synchronization checks as TSC is reliable. [ 0.590964] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.601451] Initializing CPU#5 [ 0.663480] Calibrating delay using timer specific routine.. 5558.45 BogoMIPS (lpj=2779229) [ 0.663486] CPU: Physical Processor ID: 0 [ 0.663487] CPU: Processor Core ID: 1 [ 0.663488] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.663490] CPU: L2 cache: 256K [ 0.663490] CPU: L3 cache: 8192K [ 0.663492] CPU 5/0x3 -> Node 0 [ 0.663494] mce: CPU supports 9 MCE banks [ 0.663501] CPU5: Thermal monitoring enabled (TM1) [ 0.663504] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.664207] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.664919] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.666764] Skipping synchronization checks as TSC is reliable. [ 0.666947] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.677434] Initializing CPU#6 [ 0.737443] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337) [ 0.737448] CPU: Physical Processor ID: 0 [ 0.737449] CPU: Processor Core ID: 2 [ 0.737450] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.737451] CPU: L2 cache: 256K [ 0.737452] CPU: L3 cache: 8192K [ 0.737454] CPU 6/0x5 -> Node 0 [ 0.737456] mce: CPU supports 9 MCE banks [ 0.737463] CPU6: Thermal monitoring enabled (TM1) [ 0.737465] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.738168] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.738895] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.740740] Skipping synchronization checks as TSC is reliable. [ 0.740922] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.751410] Initializing CPU#7 [ 0.811406] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337) [ 0.811412] CPU: Physical Processor ID: 0 [ 0.811412] CPU: Processor Core ID: 3 [ 0.811414] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.811415] CPU: L2 cache: 256K [ 0.811416] CPU: L3 cache: 8192K [ 0.811418] CPU 7/0x7 -> Node 0 [ 0.811420] mce: CPU supports 9 MCE banks [ 0.811427] CPU7: Thermal monitoring enabled (TM1) [ 0.811429] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.812131] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.812872] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.814717] Skipping synchronization checks as TSC is reliable. [ 0.814857] Brought up 8 CPUs [ 0.814986] Total of 8 processors activated (42972.78 BogoMIPS). [ 0.815561] NET: Registered protocol family 16 [ 0.815926] ACPI: bus type pci registered [ 0.816146] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.816282] PCI: Not using MMCONFIG. [ 0.816413] PCI: Using configuration type 1 for base access [ 0.818061] bio: create slab at 0 [ 0.818962] ACPI: EC: Look up EC in DSDT [ 0.854058] ACPI: Interpreter enabled [ 0.854190] ACPI: (supports S0 S1 S3 S4 S5) [ 0.854476] ACPI: Using IOAPIC for interrupt routing [ 0.854654] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.856873] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.863205] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.871465] ACPI Warning: Incorrect checksum in table [OEMB] - 7C, should be 74 20090521 tbutils-246 [ 0.871895] ACPI: No dock devices found. [ 0.872151] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.872365] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.872503] pci 0000:00:00.0: PME# disabled [ 0.875629] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.875765] pci 0000:00:01.0: PME# disabled [ 0.875947] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.876081] pci 0000:00:03.0: PME# disabled [ 0.876269] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.876405] pci 0000:00:07.0: PME# disabled [ 0.876645] pci 0000:00:13.0: reg 10 32bit mmio: [0xfec8a000-0xfec8afff] [ 0.876673] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.876808] pci 0000:00:13.0: PME# disabled [ 0.877140] pci 0000:00:1a.0: reg 20 io port: [0x6800-0x681f] [ 0.877201] pci 0000:00:1a.1: reg 20 io port: [0x6880-0x689f] [ 0.877263] pci 0000:00:1a.2: reg 20 io port: [0x6c00-0x6c1f] [ 0.877331] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfadff000-0xfadff3ff] [ 0.877381] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.877518] pci 0000:00:1a.7: PME# disabled [ 0.877683] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfadf8000-0xfadfbfff] [ 0.877720] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.877856] pci 0000:00:1b.0: PME# disabled [ 0.878036] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.878171] pci 0000:00:1c.0: PME# disabled [ 0.878354] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.878490] pci 0000:00:1c.2: PME# disabled [ 0.878672] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.878808] pci 0000:00:1c.3: PME# disabled [ 0.878991] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.879126] pci 0000:00:1c.4: PME# disabled [ 0.879308] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.879444] pci 0000:00:1c.5: PME# disabled [ 0.879622] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f] [ 0.879684] pci 0000:00:1d.1: reg 20 io port: [0x6400-0x641f] [ 0.879746] pci 0000:00:1d.2: reg 20 io port: [0x6480-0x649f] [ 0.879812] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfadfe000-0xfadfe3ff] [ 0.879862] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.879997] pci 0000:00:1d.7: PME# disabled [ 0.880235] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.880470] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.880607] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.880842] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 0.881120] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.881125] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.881130] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.881135] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.881140] pci 0000:00:1f.2: reg 20 io port: [0xff90-0xff9f] [ 0.881144] pci 0000:00:1f.2: reg 24 io port: [0xffa0-0xffaf] [ 0.881185] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfadfd000-0xfadfd0ff] [ 0.881197] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.881235] pci 0000:00:1f.5: reg 10 io port: [0x6000-0x6007] [ 0.881240] pci 0000:00:1f.5: reg 14 io port: [0x5c00-0x5c03] [ 0.881245] pci 0000:00:1f.5: reg 18 io port: [0x5880-0x5887] [ 0.881250] pci 0000:00:1f.5: reg 1c io port: [0x5800-0x5803] [ 0.881254] pci 0000:00:1f.5: reg 20 io port: [0x5480-0x548f] [ 0.881259] pci 0000:00:1f.5: reg 24 io port: [0x5400-0x540f] [ 0.881338] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.881475] pci 0000:01:00.0: PME# disabled [ 0.883457] pci 0000:00:01.0: bridge io port: [0x7000-0x8fff] [ 0.883464] pci 0000:00:01.0: bridge 32bit mmio: [0xfae00000-0xfb8fffff] [ 0.883522] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.883658] pci 0000:02:02.0: PME# disabled [ 0.883849] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold [ 0.883985] pci 0000:02:04.0: PME# disabled [ 0.884156] pci 0000:01:00.0: bridge io port: [0x7000-0x8fff] [ 0.884160] pci 0000:01:00.0: bridge 32bit mmio: [0xfae00000-0xfb8fffff] [ 0.884211] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb3a0000-0xfb3bffff] [ 0.884218] pci 0000:03:00.0: reg 14 32bit mmio: [0xfae00000-0xfaffffff] [ 0.884225] pci 0000:03:00.0: reg 18 io port: [0x7880-0x789f] [ 0.884232] pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb3d8000-0xfb3dbfff] [ 0.884342] pci 0000:03:00.1: reg 10 32bit mmio: [0xfb3e0000-0xfb3fffff] [ 0.884349] pci 0000:03:00.1: reg 14 32bit mmio: [0xfb000000-0xfb1fffff] [ 0.884356] pci 0000:03:00.1: reg 18 io port: [0x7c00-0x7c1f] [ 0.884363] pci 0000:03:00.1: reg 1c 32bit mmio: [0xfb3dc000-0xfb3dffff] [ 0.886478] pci 0000:02:02.0: bridge io port: [0x7000-0x7fff] [ 0.886482] pci 0000:02:02.0: bridge 32bit mmio: [0xfae00000-0xfb3fffff] [ 0.886536] pci 0000:04:00.0: reg 10 32bit mmio: [0xfb8a0000-0xfb8bffff] [ 0.886543] pci 0000:04:00.0: reg 14 32bit mmio: [0xfb400000-0xfb5fffff] [ 0.886550] pci 0000:04:00.0: reg 18 io port: [0x8880-0x889f] [ 0.886557] pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb8d8000-0xfb8dbfff] [ 0.886668] pci 0000:04:00.1: reg 10 32bit mmio: [0xfb8e0000-0xfb8fffff] [ 0.886675] pci 0000:04:00.1: reg 14 32bit mmio: [0xfb600000-0xfb7fffff] [ 0.886682] pci 0000:04:00.1: reg 18 io port: [0x8c00-0x8c1f] [ 0.886689] pci 0000:04:00.1: reg 1c 32bit mmio: [0xfb8dc000-0xfb8dffff] [ 0.888482] pci 0000:02:04.0: bridge io port: [0x8000-0x8fff] [ 0.888485] pci 0000:02:04.0: bridge 32bit mmio: [0xfb400000-0xfb8fffff] [ 0.888532] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.888539] pci 0000:05:00.0: reg 18 64bit mmio: [0xfb9e0000-0xfb9effff] [ 0.888544] pci 0000:05:00.0: reg 20 io port: [0x9000-0x90ff] [ 0.888551] pci 0000:05:00.0: reg 30 32bit mmio: [0xfb9c0000-0xfb9dffff] [ 0.888567] pci 0000:05:00.0: supports D1 D2 [ 0.888594] pci 0000:05:00.1: reg 10 64bit mmio: [0xfb9f0000-0xfb9fffff] [ 0.888622] pci 0000:05:00.1: supports D1 D2 [ 0.888638] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.888913] pci 0000:00:03.0: bridge io port: [0x9000-0x9fff] [ 0.888916] pci 0000:00:03.0: bridge 32bit mmio: [0xfb900000-0xfb9fffff] [ 0.888920] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.888985] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf9f00000-0xf9ffffff] [ 0.889040] pci 0000:0a:00.0: reg 10 64bit mmio: [0xfbdfc000-0xfbdfffff] [ 0.889047] pci 0000:0a:00.0: reg 18 io port: [0xd800-0xd8ff] [ 0.889071] pci 0000:0a:00.0: reg 30 32bit mmio: [0xfbdc0000-0xfbddffff] [ 0.889109] pci 0000:0a:00.0: supports D1 D2 [ 0.889110] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.889248] pci 0000:0a:00.0: PME# disabled [ 0.891496] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] [ 0.891500] pci 0000:00:1c.2: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 0.891556] pci 0000:09:00.0: reg 18 io port: [0xcc00-0xcc7f] [ 0.891574] pci 0000:09:00.0: reg 20 64bit mmio: [0xfbcff000-0xfbcfffff] [ 0.891582] pci 0000:09:00.0: reg 30 32bit mmio: [0xfbc80000-0xfbcbffff] [ 0.891613] pci 0000:09:00.0: supports D1 [ 0.891614] pci 0000:09:00.0: PME# supported from D0 D1 D3hot [ 0.891750] pci 0000:09:00.0: PME# disabled [ 0.891905] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.892198] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff] [ 0.892201] pci 0000:00:1c.3: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] [ 0.892246] pci 0000:08:00.0: reg 10 io port: [0xbc00-0xbc07] [ 0.892253] pci 0000:08:00.0: reg 14 io port: [0xb880-0xb883] [ 0.892260] pci 0000:08:00.0: reg 18 io port: [0xb800-0xb807] [ 0.892267] pci 0000:08:00.0: reg 1c io port: [0xb480-0xb483] [ 0.892274] pci 0000:08:00.0: reg 20 io port: [0xb400-0xb40f] [ 0.892281] pci 0000:08:00.0: reg 24 32bit mmio: [0xfbbffc00-0xfbbfffff] [ 0.892319] pci 0000:08:00.0: supports D1 [ 0.892320] pci 0000:08:00.0: PME# supported from D0 D1 D3hot [ 0.892457] pci 0000:08:00.0: PME# disabled [ 0.892612] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.892905] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] [ 0.892909] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbb00000-0xfbbfffff] [ 0.892966] pci 0000:07:00.0: reg 10 64bit mmio: [0xfbafc000-0xfbafffff] [ 0.892974] pci 0000:07:00.0: reg 18 io port: [0xa800-0xa8ff] [ 0.892998] pci 0000:07:00.0: reg 30 32bit mmio: [0xfbac0000-0xfbadffff] [ 0.893035] pci 0000:07:00.0: supports D1 D2 [ 0.893036] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.893173] pci 0000:07:00.0: PME# disabled [ 0.894497] pci 0000:00:1c.5: bridge io port: [0xa000-0xafff] [ 0.894501] pci 0000:00:1c.5: bridge 32bit mmio: [0xfba00000-0xfbafffff] [ 0.894538] pci 0000:0c:02.0: reg 10 32bit mmio: [0xfbeff000-0xfbeff7ff] [ 0.894544] pci 0000:0c:02.0: reg 14 io port: [0xec00-0xec7f] [ 0.894584] pci 0000:0c:02.0: supports D2 [ 0.894585] pci 0000:0c:02.0: PME# supported from D2 D3hot D3cold [ 0.894721] pci 0000:0c:02.0: PME# disabled [ 0.894890] pci 0000:00:1e.0: transparent bridge [ 0.895023] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.895026] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.895067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.895367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.895471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.895525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.895575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.895624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.895674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.895723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 0.895773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 0.895823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 0.923077] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.923606] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.923916] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.924443] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.924969] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.925494] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.926017] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15) [ 0.926542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.927160] SCSI subsystem initialized [ 0.927360] libata version 3.00 loaded. [ 0.927420] usbcore: registered new interface driver usbfs [ 0.927574] usbcore: registered new interface driver hub [ 0.927730] usbcore: registered new device driver usb [ 0.927972] PCI: Using ACPI for IRQ routing [ 0.932441] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.932711] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.939410] Switched to high resolution mode on CPU 0 [ 0.939449] Switched to high resolution mode on CPU 1 [ 0.939452] Switched to high resolution mode on CPU 3 [ 0.939455] Switched to high resolution mode on CPU 2 [ 0.939742] Switched to high resolution mode on CPU 4 [ 0.939799] Switched to high resolution mode on CPU 7 [ 0.939800] Switched to high resolution mode on CPU 6 [ 0.939804] Switched to high resolution mode on CPU 5 [ 0.942413] pnp: PnP ACPI init [ 0.942553] ACPI: bus type pnp registered [ 0.945432] pnp: PnP ACPI: found 15 devices [ 0.945563] ACPI: ACPI bus type pnp unregistered [ 0.945701] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved [ 0.945837] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 0.945973] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 0.946109] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 0.946248] system 00:07: ioport range 0x290-0x29f has been reserved [ 0.946384] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.946520] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.946655] system 00:08: ioport range 0x500-0x57f could not be reserved [ 0.946792] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.946928] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.947064] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.947202] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved [ 0.950415] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.950552] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.950694] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.950833] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.950969] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.951105] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.951241] system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved [ 0.951478] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.956557] pci 0000:02:02.0: PCI bridge, secondary bus 0000:03 [ 0.956693] pci 0000:02:02.0: IO window: 0x7000-0x7fff [ 0.956829] pci 0000:02:02.0: MEM window: 0xfae00000-0xfb3fffff [ 0.956965] pci 0000:02:02.0: PREFETCH window: disabled [ 0.957099] pci 0000:02:04.0: PCI bridge, secondary bus 0000:04 [ 0.957234] pci 0000:02:04.0: IO window: 0x8000-0x8fff [ 0.957370] pci 0000:02:04.0: MEM window: 0xfb400000-0xfb8fffff [ 0.957507] pci 0000:02:04.0: PREFETCH window: disabled [ 0.957641] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.957776] pci 0000:01:00.0: IO window: 0x7000-0x8fff [ 0.957912] pci 0000:01:00.0: MEM window: 0xfae00000-0xfb8fffff [ 0.958047] pci 0000:01:00.0: PREFETCH window: disabled [ 0.958182] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.958316] pci 0000:00:01.0: IO window: 0x7000-0x8fff [ 0.958451] pci 0000:00:01.0: MEM window: 0xfae00000-0xfb8fffff [ 0.958586] pci 0000:00:01.0: PREFETCH window: disabled [ 0.958721] pci 0000:00:03.0: PCI bridge, secondary bus 0000:05 [ 0.958855] pci 0000:00:03.0: IO window: 0x9000-0x9fff [ 0.958990] pci 0000:00:03.0: MEM window: 0xfb900000-0xfb9fffff [ 0.959125] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.959360] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06 [ 0.959494] pci 0000:00:07.0: IO window: disabled [ 0.959627] pci 0000:00:07.0: MEM window: disabled [ 0.959760] pci 0000:00:07.0: PREFETCH window: disabled [ 0.959894] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b [ 0.960027] pci 0000:00:1c.0: IO window: disabled [ 0.960161] pci 0000:00:1c.0: MEM window: disabled [ 0.960294] pci 0000:00:1c.0: PREFETCH window: 0x000000f9f00000-0x000000f9ffffff [ 0.960531] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0a [ 0.960665] pci 0000:00:1c.2: IO window: 0xd000-0xdfff [ 0.960800] pci 0000:00:1c.2: MEM window: 0xfbd00000-0xfbdfffff [ 0.960935] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.961069] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 [ 0.961203] pci 0000:00:1c.3: IO window: 0xc000-0xcfff [ 0.961338] pci 0000:00:1c.3: MEM window: 0xfbc00000-0xfbcfffff [ 0.961474] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.961608] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08 [ 0.961743] pci 0000:00:1c.4: IO window: 0xb000-0xbfff [ 0.961877] pci 0000:00:1c.4: MEM window: 0xfbb00000-0xfbbfffff [ 0.962012] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.962146] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07 [ 0.962280] pci 0000:00:1c.5: IO window: 0xa000-0xafff [ 0.962416] pci 0000:00:1c.5: MEM window: 0xfba00000-0xfbafffff [ 0.962551] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.962686] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c [ 0.962820] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.962954] pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff [ 0.963089] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.963228] pci 0000:00:01.0: setting latency timer to 64 [ 0.963237] pci 0000:01:00.0: setting latency timer to 64 [ 0.963245] pci 0000:02:02.0: setting latency timer to 64 [ 0.963254] pci 0000:02:04.0: setting latency timer to 64 [ 0.963260] pci 0000:00:03.0: setting latency timer to 64 [ 0.963266] pci 0000:00:07.0: setting latency timer to 64 [ 0.963274] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.963412] pci 0000:00:1c.0: setting latency timer to 64 [ 0.963419] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.963556] pci 0000:00:1c.2: setting latency timer to 64 [ 0.963563] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.963700] pci 0000:00:1c.3: setting latency timer to 64 [ 0.963706] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.963843] pci 0000:00:1c.4: setting latency timer to 64 [ 0.963850] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.963987] pci 0000:00:1c.5: setting latency timer to 64 [ 0.963992] pci 0000:00:1e.0: setting latency timer to 64 [ 0.963995] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.963997] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.963999] pci_bus 0000:01: resource 0 io: [0x7000-0x8fff] [ 0.964000] pci_bus 0000:01: resource 1 mem: [0xfae00000-0xfb8fffff] [ 0.964002] pci_bus 0000:02: resource 0 io: [0x7000-0x8fff] [ 0.964004] pci_bus 0000:02: resource 1 mem: [0xfae00000-0xfb8fffff] [ 0.964006] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff] [ 0.964007] pci_bus 0000:03: resource 1 mem: [0xfae00000-0xfb3fffff] [ 0.964009] pci_bus 0000:04: resource 0 io: [0x8000-0x8fff] [ 0.964011] pci_bus 0000:04: resource 1 mem: [0xfb400000-0xfb8fffff] [ 0.964012] pci_bus 0000:05: resource 0 io: [0x9000-0x9fff] [ 0.964014] pci_bus 0000:05: resource 1 mem: [0xfb900000-0xfb9fffff] [ 0.964016] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.964018] pci_bus 0000:0b: resource 2 pref mem [0xf9f00000-0xf9ffffff] [ 0.964019] pci_bus 0000:0a: resource 0 io: [0xd000-0xdfff] [ 0.964021] pci_bus 0000:0a: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 0.964023] pci_bus 0000:09: resource 0 io: [0xc000-0xcfff] [ 0.964024] pci_bus 0000:09: resource 1 mem: [0xfbc00000-0xfbcfffff] [ 0.964026] pci_bus 0000:08: resource 0 io: [0xb000-0xbfff] [ 0.964028] pci_bus 0000:08: resource 1 mem: [0xfbb00000-0xfbbfffff] [ 0.964029] pci_bus 0000:07: resource 0 io: [0xa000-0xafff] [ 0.964031] pci_bus 0000:07: resource 1 mem: [0xfba00000-0xfbafffff] [ 0.964033] pci_bus 0000:0c: resource 0 io: [0xe000-0xefff] [ 0.964034] pci_bus 0000:0c: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.964036] pci_bus 0000:0c: resource 3 io: [0x00-0xffff] [ 0.964038] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.964059] NET: Registered protocol family 2 [ 0.964347] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.965314] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.966822] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 0.967387] TCP: Hash tables configured (established 524288 bind 65536) [ 0.967525] TCP reno registered [ 0.967733] NET: Registered protocol family 1 [ 0.967897] Trying to unpack rootfs image as initramfs... [ 1.371398] Freeing initrd memory: 20230k freed [ 1.375558] audit: initializing netlink socket (disabled) [ 1.375700] type=2000 audit(1247173664.089:1): initialized [ 1.382005] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.384290] msgmni has been set to 11933 [ 1.387695] alg: No test for stdrng (krng) [ 1.387833] io scheduler noop registered [ 1.387963] io scheduler anticipatory registered [ 1.388094] io scheduler deadline registered [ 1.388273] io scheduler cfq registered (default) [ 1.388546] pci 0000:03:00.0: Disabling L0s [ 1.388678] pci 0000:03:00.1: Disabling L0s [ 1.388809] pci 0000:04:00.0: Disabling L0s [ 1.388941] pci 0000:04:00.1: Disabling L0s [ 1.389074] pci 0000:05:00.0: Boot video device [ 1.389221] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X [ 1.389228] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.389364] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X [ 1.389369] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 1.389501] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X [ 1.389506] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 1.389632] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X [ 1.389638] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.389786] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X [ 1.389792] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.389941] pcieport-driver 0000:00:1c.3: irq 53 for MSI/MSI-X [ 1.389948] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.390092] pcieport-driver 0000:00:1c.4: irq 54 for MSI/MSI-X [ 1.390099] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.390244] pcieport-driver 0000:00:1c.5: irq 55 for MSI/MSI-X [ 1.390251] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.390394] pcieport-driver 0000:01:00.0: setting latency timer to 64 [ 1.390523] pcieport-driver 0000:02:02.0: irq 56 for MSI/MSI-X [ 1.390532] pcieport-driver 0000:02:02.0: setting latency timer to 64 [ 1.390679] pcieport-driver 0000:02:04.0: irq 57 for MSI/MSI-X [ 1.390687] pcieport-driver 0000:02:04.0: setting latency timer to 64 [ 1.390814] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 1.390820] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.390824] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 1.390829] aer 0000:02:02.0:pcie22: AER service couldn't init device: no _OSC support [ 1.390833] aer 0000:02:04.0:pcie22: AER service couldn't init device: no _OSC support [ 1.391067] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.391302] ACPI: Power Button [PWRF] [ 1.391492] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.391727] ACPI: Power Button [PWRB] [ 1.392350] ACPI: SSDT 00000000bf798200 00403 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 1.393045] ACPI: SSDT 00000000bf79a280 003B2 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 1.393625] Monitor-Mwait will be used to enter C-1 state [ 1.393639] Monitor-Mwait will be used to enter C-2 state [ 1.393650] Monitor-Mwait will be used to enter C-3 state [ 1.393679] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.393946] processor LNXCPU:00: registered as cooling_device0 [ 1.394504] ACPI: SSDT 00000000bf798610 00403 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 1.395132] ACPI: SSDT 00000000bf79a640 00085 (v01 PmRef P002Cst 00003000 INTL 20060113) [ 1.395784] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.396046] processor LNXCPU:01: registered as cooling_device1 [ 1.396597] ACPI: SSDT 00000000bf798a20 00403 (v01 DpgPmm P003Ist 00000012 INTL 20060113) [ 1.397231] ACPI: SSDT 00000000bf79a6d0 00085 (v01 PmRef P003Cst 00003000 INTL 20060113) [ 1.397884] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) [ 1.398146] processor LNXCPU:02: registered as cooling_device2 [ 1.398706] ACPI: SSDT 00000000bf798e30 00403 (v01 DpgPmm P004Ist 00000012 INTL 20060113) [ 1.399343] ACPI: SSDT 00000000bf79a760 00085 (v01 PmRef P004Cst 00003000 INTL 20060113) [ 1.399993] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) [ 1.400256] processor LNXCPU:03: registered as cooling_device3 [ 1.400817] ACPI: SSDT 00000000bf799240 00403 (v01 DpgPmm P005Ist 00000012 INTL 20060113) [ 1.401458] ACPI: SSDT 00000000bf79a7f0 00085 (v01 PmRef P005Cst 00003000 INTL 20060113) [ 1.402115] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3]) [ 1.402380] processor LNXCPU:04: registered as cooling_device4 [ 1.402932] ACPI: SSDT 00000000bf799650 00403 (v01 DpgPmm P006Ist 00000012 INTL 20060113) [ 1.403575] ACPI: SSDT 00000000bf79a880 00085 (v01 PmRef P006Cst 00003000 INTL 20060113) [ 1.404223] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3]) [ 1.404490] processor LNXCPU:05: registered as cooling_device5 [ 1.405052] ACPI: SSDT 00000000bf799a60 00403 (v01 DpgPmm P007Ist 00000012 INTL 20060113) [ 1.405697] ACPI: SSDT 00000000bf79a910 00085 (v01 PmRef P007Cst 00003000 INTL 20060113) [ 1.406345] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3]) [ 1.406609] processor LNXCPU:06: registered as cooling_device6 [ 1.407167] ACPI: SSDT 00000000bf799e70 00403 (v01 DpgPmm P008Ist 00000012 INTL 20060113) [ 1.407807] ACPI: SSDT 00000000bf79a9a0 00085 (v01 PmRef P008Cst 00003000 INTL 20060113) [ 1.408459] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3]) [ 1.408723] processor LNXCPU:07: registered as cooling_device7 [ 1.429222] Linux agpgart interface v0.103 [ 1.429379] [drm] Initialized drm 1.1.0 20060810 [ 1.429511] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.429859] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 1.431349] brd: module loaded [ 1.431646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.431804] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.431954] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.431957] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.432134] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.436266] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.436402] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.436413] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfadff000 [ 1.446319] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.446525] usb usb1: configuration #1 chosen from 1 choice [ 1.446691] hub 1-0:1.0: USB hub found [ 1.446823] hub 1-0:1.0: 6 ports detected [ 1.447011] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.447154] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.447156] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.447333] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.451459] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.451593] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.451603] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfadfe000 [ 1.461316] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.461516] usb usb2: configuration #1 chosen from 1 choice [ 1.461680] hub 2-0:1.0: USB hub found [ 1.461812] hub 2-0:1.0: 6 ports detected [ 1.462000] uhci_hcd: USB Universal Host Controller Interface driver [ 1.462156] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.462295] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.462297] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.462472] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.462731] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00006800 [ 1.462937] usb usb3: configuration #1 chosen from 1 choice [ 1.463100] hub 3-0:1.0: USB hub found [ 1.463232] hub 3-0:1.0: 2 ports detected [ 1.463412] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.466624] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.466627] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.466805] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.467062] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006880 [ 1.467268] usb usb4: configuration #1 chosen from 1 choice [ 1.467438] hub 4-0:1.0: USB hub found [ 1.467570] hub 4-0:1.0: 2 ports detected [ 1.467747] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.467885] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.467888] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.468062] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.468323] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00006c00 [ 1.468531] usb usb5: configuration #1 chosen from 1 choice [ 1.468697] hub 5-0:1.0: USB hub found [ 1.468829] hub 5-0:1.0: 2 ports detected [ 1.469004] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.469143] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.469145] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.469320] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.469571] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080 [ 1.469777] usb usb6: configuration #1 chosen from 1 choice [ 1.469939] hub 6-0:1.0: USB hub found [ 1.470071] hub 6-0:1.0: 2 ports detected [ 1.470249] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.470391] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.470394] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.470568] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.470821] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006400 [ 1.471026] usb usb7: configuration #1 chosen from 1 choice [ 1.471189] hub 7-0:1.0: USB hub found [ 1.471325] hub 7-0:1.0: 2 ports detected [ 1.471501] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.471641] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.471643] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.471819] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.472071] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006480 [ 1.472276] usb usb8: configuration #1 chosen from 1 choice [ 1.472443] hub 8-0:1.0: USB hub found [ 1.472577] hub 8-0:1.0: 2 ports detected [ 1.472795] usbcore: registered new interface driver libusual [ 1.473004] PNP: No PS/2 controller found. Probing ports directly. [ 1.473146] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 1.475668] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.475806] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.476024] mice: PS/2 mouse device common for all mice [ 1.476735] cpuidle: using governor ladder [ 1.477932] cpuidle: using governor menu [ 1.478381] TCP cubic registered [ 1.478515] NET: Registered protocol family 17 [ 1.478805] PM: Resume from disk failed. [ 1.478813] registered taskstats version 1 [ 1.479091] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.479249] Initalizing network drop monitor service [ 1.479398] Freeing unused kernel memory: 496k freed [ 1.557242] fuse init (API version 7.12) [ 1.608772] Platform driver 'floppy' needs updating - please use dev_pm_ops [ 1.608953] Floppy drive(s): fd0 is 1.44M [ 1.613407] dca service started, version 1.8 [ 1.616923] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 1.617060] Copyright (c) 2007-2009 Intel Corporation. [ 1.617254] igb 0000:03:00.0: PCI INT A -> GSI 41 (level, low) -> IRQ 41 [ 1.617417] igb 0000:03:00.0: setting latency timer to 64 [ 1.617721] igb 0000:03:00.0: irq 58 for MSI/MSI-X [ 1.617725] igb 0000:03:00.0: irq 59 for MSI/MSI-X [ 1.617728] igb 0000:03:00.0: irq 60 for MSI/MSI-X [ 1.617732] igb 0000:03:00.0: irq 61 for MSI/MSI-X [ 1.617735] igb 0000:03:00.0: irq 62 for MSI/MSI-X [ 1.617739] igb 0000:03:00.0: irq 63 for MSI/MSI-X [ 1.617742] igb 0000:03:00.0: irq 64 for MSI/MSI-X [ 1.617745] igb 0000:03:00.0: irq 65 for MSI/MSI-X [ 1.617748] igb 0000:03:00.0: irq 66 for MSI/MSI-X [ 1.623661] sky2 driver version 1.23 [ 1.623963] sky2 0000:0a:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.624113] sky2 0000:0a:00.0: setting latency timer to 64 [ 1.624144] sky2 0000:0a:00.0: Yukon-2 EC Ultra chip revision 3 [ 1.624264] FDC 0 is a post-1991 82077 [ 1.624558] sky2 0000:0a:00.0: irq 67 for MSI/MSI-X [ 1.624842] sky2 eth0: addr 00:23:54:91:08:c2 [ 1.625230] sky2 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.625380] sky2 0000:07:00.0: setting latency timer to 64 [ 1.625398] sky2 0000:07:00.0: Yukon-2 EC Ultra chip revision 3 [ 1.625616] sky2 0000:07:00.0: irq 68 for MSI/MSI-X [ 1.625861] sky2 eth1: addr 00:23:54:91:08:c1 [ 1.629445] ahci 0000:08:00.0: version 3.0 [ 1.634460] ata_piix 0000:00:1f.2: version 2.13 [ 1.634482] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.634627] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.634946] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.635337] scsi0 : ata_piix [ 1.637937] scsi1 : ata_piix [ 1.639610] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [ 1.639757] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [ 1.641678] pata_marvell 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.641952] pata_marvell 0000:08:00.0: setting latency timer to 64 [ 1.642358] scsi2 : pata_marvell [ 1.642527] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.642702] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.643005] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.643038] scsi3 : pata_marvell [ 1.643194] scsi4 : ata_piix [ 1.643374] ata3: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 16 [ 1.643515] ata4: PATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 16 [ 1.643729] scsi5 : ata_piix [ 1.645296] ata5: SATA max UDMA/133 cmd 0x6000 ctl 0x5c00 bmdma 0x5480 irq 20 [ 1.645442] ata6: SATA max UDMA/133 cmd 0x5880 ctl 0x5800 bmdma 0x5488 irq 20 [ 1.749385] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 1.797714] ata3.00: ATAPI: SONY DVD RW DW-U18A, UYS1, max UDMA/33 [ 1.803309] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.803478] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:1b:21:06:2a:d8 [ 1.803698] igb 0000:03:00.0: eth2: PBA No: d96950-002 [ 1.803835] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.803945] ata3.00: configured for UDMA/33 [ 1.804353] igb 0000:03:00.1: PCI INT B -> GSI 47 (level, low) -> IRQ 47 [ 1.804521] igb 0000:03:00.1: setting latency timer to 64 [ 1.804852] igb 0000:03:00.1: irq 69 for MSI/MSI-X [ 1.804854] igb 0000:03:00.1: irq 70 for MSI/MSI-X [ 1.804856] igb 0000:03:00.1: irq 71 for MSI/MSI-X [ 1.804859] igb 0000:03:00.1: irq 72 for MSI/MSI-X [ 1.804861] igb 0000:03:00.1: irq 73 for MSI/MSI-X [ 1.804863] igb 0000:03:00.1: irq 74 for MSI/MSI-X [ 1.804865] igb 0000:03:00.1: irq 75 for MSI/MSI-X [ 1.804867] igb 0000:03:00.1: irq 76 for MSI/MSI-X [ 1.804870] igb 0000:03:00.1: irq 77 for MSI/MSI-X [ 1.863835] usb 1-5: configuration #1 chosen from 1 choice [ 1.864131] hub 1-5:1.0: USB hub found [ 1.864380] hub 1-5:1.0: 4 ports detected [ 1.961455] ata5: SATA link down (SStatus 0 SControl 300) [ 1.972791] ata6: SATA link down (SStatus 0 SControl 300) [ 1.972794] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.988335] igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection [ 1.988472] igb 0000:03:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:1b:21:06:2a:d9 [ 1.988688] igb 0000:03:00.1: eth3: PBA No: d96950-002 [ 1.988820] igb 0000:03:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.989176] igb 0000:04:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 1.989393] igb 0000:04:00.0: setting latency timer to 64 [ 1.989658] igb 0000:04:00.0: irq 78 for MSI/MSI-X [ 1.989660] igb 0000:04:00.0: irq 79 for MSI/MSI-X [ 1.989662] igb 0000:04:00.0: irq 80 for MSI/MSI-X [ 1.989665] igb 0000:04:00.0: irq 81 for MSI/MSI-X [ 1.989667] igb 0000:04:00.0: irq 82 for MSI/MSI-X [ 1.989669] igb 0000:04:00.0: irq 83 for MSI/MSI-X [ 1.989672] igb 0000:04:00.0: irq 84 for MSI/MSI-X [ 1.989674] igb 0000:04:00.0: irq 85 for MSI/MSI-X [ 1.989676] igb 0000:04:00.0: irq 86 for MSI/MSI-X [ 2.086658] usb 2-1: configuration #1 chosen from 1 choice [ 2.086950] hub 2-1:1.0: USB hub found [ 2.087225] hub 2-1:1.0: 4 ports detected [ 2.173321] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.173458] igb 0000:04:00.0: eth4: (PCIe:2.5Gb/s:Width x4) 00:1b:21:06:2a:dc [ 2.173674] igb 0000:04:00.0: eth4: PBA No: d96950-002 [ 2.173806] igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.174164] igb 0000:04:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40 [ 2.174330] igb 0000:04:00.1: setting latency timer to 64 [ 2.174596] igb 0000:04:00.1: irq 87 for MSI/MSI-X [ 2.174599] igb 0000:04:00.1: irq 88 for MSI/MSI-X [ 2.174601] igb 0000:04:00.1: irq 89 for MSI/MSI-X [ 2.174603] igb 0000:04:00.1: irq 90 for MSI/MSI-X [ 2.174605] igb 0000:04:00.1: irq 91 for MSI/MSI-X [ 2.174607] igb 0000:04:00.1: irq 92 for MSI/MSI-X [ 2.174609] igb 0000:04:00.1: irq 93 for MSI/MSI-X [ 2.174611] igb 0000:04:00.1: irq 94 for MSI/MSI-X [ 2.174614] igb 0000:04:00.1: irq 95 for MSI/MSI-X [ 2.260135] ata2.00: SATA link down (SStatus 0 SControl 300) [ 2.260309] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.271273] ata1.00: SATA link down (SStatus 0 SControl 300) [ 2.271415] ata1.01: SATA link down (SStatus 0 SControl 301) [ 2.272631] scsi 2:0:0:0: CD-ROM SONY DVD RW DW-U18A UYS1 PQ: 0 ANSI: 5 [ 2.360369] usb 2-1.1: new low speed USB device using ehci_hcd and address 3 [ 2.375217] igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.375354] igb 0000:04:00.1: eth5: (PCIe:2.5Gb/s:Width x4) 00:1b:21:06:2a:dd [ 2.375584] igb 0000:04:00.1: eth5: PBA No: d96950-002 [ 2.375716] igb 0000:04:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.440925] mvsas 0000:09:00.0: mvsas: driver version 0.8.2 [ 2.441083] mvsas 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.441234] mvsas 0000:09:00.0: setting latency timer to 64 [ 2.442150] mvsas 0000:09:00.0: mvsas: PCI-E x1, Bandwidth Usage: 2.5 Gbps [ 2.448073] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.448215] Uniform CD-ROM driver Revision: 3.20 [ 2.448438] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.450907] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 2.451781] usb 2-1.1: configuration #1 chosen from 1 choice [ 2.457408] usbcore: registered new interface driver hiddev [ 2.457651] usbcore: registered new interface driver usbhid [ 2.457794] usbhid: v2.6:USB HID core driver [ 2.463878] input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.0/input/input2 [ 2.464234] belkin 0003:050D:3201.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1d.7-1.1/input0 [ 2.526314] usb 2-1.3: new low speed USB device using ehci_hcd and address 4 [ 2.617231] usb 2-1.3: configuration #1 chosen from 1 choice [ 2.619653] input: Kensington USB/PS2 Wheel Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input3 [ 2.619940] generic-usb 0003:047D:1029.0002: input,hidraw1: USB HID v1.10 Mouse [Kensington USB/PS2 Wheel Mouse] on usb-0000:00:1d.7-1.3/input0 [ 2.693257] usb 2-1.4: new low speed USB device using ehci_hcd and address 5 [ 2.785799] usb 2-1.4: configuration #1 chosen from 1 choice [ 2.803155] input: Key Tronic Keytronic USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.0/input/input4 [ 2.803472] generic-usb 0003:03F9:0100.0003: input,hidraw2: USB HID v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on usb-0000:00:1d.7-1.4/input0 [ 5.000766] scsi6 : mvsas [ 5.001228] drivers/scsi/mvsas/mv_sas.c 1250:set wide port phy map 1 [ 5.012251] scsi 6:0:0:0: Direct-Access FUJITSU MBA3147RC 0103 PQ: 0 ANSI: 5 [ 6.001744] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 6.191196] sd 6:0:0:0: [sda] 287277984 512-byte logical blocks: (147 GB/136 GiB) [ 6.430591] sd 6:0:0:0: [sda] Write Protect is off [ 6.430787] sd 6:0:0:0: [sda] Mode Sense: bf 00 00 08 [ 6.432080] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.437403] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 6.500196] sd 6:0:0:0: [sda] Attached SCSI disk [ 11.830746] kjournald starting. Commit interval 5 seconds [ 11.830752] EXT3-fs: mounted filesystem with writeback data mode. [ 14.305882] udev: starting version 141 [ 14.512407] IPv4 FIB: Using LC-trie version 0.408 [ 14.516163] ACPI: WMI: Mapper loaded [ 14.596483] rtc_cmos 00:03: RTC can wake from S4 [ 14.596677] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 14.596833] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 14.630668] Platform driver 'pcspkr' needs updating - please use dev_pm_ops [ 14.630844] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 15.109551] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.109899] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.500672] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... [ 15.611381] Adding 1060280k swap on /dev/sda2. Priority:-1 extents:1 across:1060280k [ 15.757706] EXT3 FS on sda1, internal journal [ 16.043147] EXT4-fs (sda3): barriers enabled [ 16.047231] kjournald2 starting: pid 4776, dev sda3:8, commit interval 5 seconds [ 16.047503] EXT4-fs (sda3): internal journal on sda3:8 [ 16.047506] EXT4-fs (sda3): delayed allocation enabled [ 16.047508] EXT4-fs: file extents enabled [ 16.048108] EXT4-fs: mballoc enabled [ 16.048118] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 16.564004] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x020b0001 [ 17.245831] NET: Registered protocol family 10 [ 17.246186] lo: Disabled Privacy Extensions [ 18.107505] Bridge firewalling registered [ 18.124812] virbr0: starting userspace STP failed, starting kernel STP [ 18.287453] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.451520] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 18.688530] virbr3: starting userspace STP failed, starting kernel STP [ 18.726066] virbr4: starting userspace STP failed, starting kernel STP [ 18.755625] virbr2: starting userspace STP failed, starting kernel STP [ 18.777510] virbr1: starting userspace STP failed, starting kernel STP [ 20.087783] pci 0000:05:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 24.285950] sky2 eth1: enabling interface [ 24.286864] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 24.290566] sky2 eth0: enabling interface [ 24.291567] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.313003] ADDRCONF(NETDEV_UP): eth5: link is not ready [ 24.326627] ADDRCONF(NETDEV_UP): eth4: link is not ready [ 24.339791] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 24.352864] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 26.754544] sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control both [ 26.755496] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 28.367408] virbr0: no IPv6 routers present [ 29.010256] virbr1: no IPv6 routers present [ 29.137267] virbr2: no IPv6 routers present [ 29.301231] virbr4: no IPv6 routers present [ 29.506194] virbr3: no IPv6 routers present [ 37.333717] eth1: no IPv6 routers present [ 2402.706067] tun: Universal TUN/TAP device driver, 1.6 [ 2402.706070] tun: (C) 1999-2004 Max Krasnyansky [ 2402.707593] device vnet0 entered promiscuous mode [ 2402.708585] virbr0: topology change detected, propagating [ 2402.708589] virbr0: port 1(vnet0) entering forwarding state [ 2413.346614] vnet0: no IPv6 routers present [ 2586.373657] device vnet1 entered promiscuous mode [ 2586.374762] virbr0: topology change detected, propagating [ 2586.374767] virbr0: port 2(vnet1) entering forwarding state [ 2597.311968] vnet1: no IPv6 routers present [ 2661.394421] virbr0: port 2(vnet1) entering disabled state [ 2661.398597] device vnet1 left promiscuous mode [ 2661.398603] virbr0: port 2(vnet1) entering disabled state [ 2685.630391] device vnet1 entered promiscuous mode [ 2685.631429] virbr0: topology change detected, propagating [ 2685.631434] virbr0: port 2(vnet1) entering forwarding state [ 2696.432735] vnet1: no IPv6 routers present -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/