Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 12 Mar 2002 11:00:21 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 12 Mar 2002 11:00:13 -0500 Received: from mail.pha.ha-vel.cz ([195.39.72.3]:15635 "HELO mail.pha.ha-vel.cz") by vger.kernel.org with SMTP id ; Tue, 12 Mar 2002 10:59:45 -0500 Date: Tue, 12 Mar 2002 16:59:37 +0100 From: Vojtech Pavlik To: Martin Dalecki Cc: LKML Subject: Re: [patch] My AMD IDE driver, v2.7 Message-ID: <20020312165937.A4987@ucw.cz> In-Reply-To: <20020311234553.A3490@ucw.cz> <3C8DDFC8.5080501@evision-ventures.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="n8g4imXOkfNTN/H1" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3C8DDFC8.5080501@evision-ventures.com>; from dalecki@evision-ventures.com on Tue, Mar 12, 2002 at 12:00:24PM +0100 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --n8g4imXOkfNTN/H1 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Tue, Mar 12, 2002 at 12:00:24PM +0100, Martin Dalecki wrote: > Hello Vojtech. > > I have noticed that the ide-timings.h and ide_modules.h are running > much in aprallel in the purpose they serve. Are the any > chances you could dare to care about propagating the > fairly nice ide-timings.h stuff in favour of > ide_modules.h more. > > BTW.> I think some stuff from ide-timings.h just belongs > as generic functions intro ide.c, and right now there is > nobody who you need to work from behind ;-). > > So please feel free to do the changes you apparently desired > to do a long time ago... Hmm, ok. Try this. It shouldn't change any functionality, yet makes a small step towards cleaning the chipset specific drivers. Reading through them as I was doing the changes, I found out that most of them compute the timings incorrectly. Because of that I also removed the pio blacklist (which is going to come back in a more powerful form, merged together with the DMA blacklist), because that one is based on ancient experiments with the broken CMD640 chip and a driver which doesn't get the timings correct either. The blacklist is plain invalid. I plan to focus on the most important drivers first, to fix and clean them, working with the authors where possible. -- Vojtech Pavlik SuSE Labs --n8g4imXOkfNTN/H1 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="ide-timing.diff" diff -urN linux-2.5.6/drivers/ide/Makefile linux-2.5.6-timing/drivers/ide/Makefile --- linux-2.5.6/drivers/ide/Makefile Wed Feb 20 03:10:55 2002 +++ linux-2.5.6-timing/drivers/ide/Makefile Tue Mar 12 16:26:03 2002 @@ -76,7 +76,7 @@ ide-obj-$(CONFIG_PROC_FS) += ide-proc.o -ide-mod-objs := ide-taskfile.o ide.o ide-probe.o ide-geometry.o ide-features.o $(ide-obj-y) +ide-mod-objs := ide-taskfile.o ide.o ide-probe.o ide-geometry.o ide-features.o ide-timing.o $(ide-obj-y) include $(TOPDIR)/Rules.make diff -urN linux-2.5.6/drivers/ide/aec62xx.c linux-2.5.6-timing/drivers/ide/aec62xx.c --- linux-2.5.6/drivers/ide/aec62xx.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/aec62xx.c Tue Mar 12 16:26:03 2002 @@ -24,7 +24,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" #define DISPLAY_AEC62XX_TIMINGS @@ -412,16 +412,11 @@ static void aec62xx_tune_drive (ide_drive_t *drive, byte pio) { byte speed; - byte new_pio = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); - switch(pio) { - case 5: speed = new_pio; break; - case 4: speed = XFER_PIO_4; break; - case 3: speed = XFER_PIO_3; break; - case 2: speed = XFER_PIO_2; break; - case 1: speed = XFER_PIO_1; break; - default: speed = XFER_PIO_0; break; - } + if (pio == 255) + speed = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); + else + speed = XFER_PIO_0 + min_t(byte, pio, 4); switch(HWIF(drive)->pci_dev->device) { case PCI_DEVICE_ID_ARTOP_ATP850UF: diff -urN linux-2.5.6/drivers/ide/ali14xx.c linux-2.5.6-timing/drivers/ide/ali14xx.c --- linux-2.5.6/drivers/ide/ali14xx.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/ali14xx.c Tue Mar 12 16:26:03 2002 @@ -48,7 +48,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" /* port addresses for auto-detection */ #define ALI_NUM_PORTS 4 @@ -67,8 +67,6 @@ {0x35, 0x03}, {0x00, 0x00} }; -#define ALI_MAX_PIO 4 - /* timing parameter registers for each drive */ static struct { byte reg1, reg2, reg3, reg4; } regTab[4] = { {0x03, 0x26, 0x04, 0x27}, /* drive 0 */ @@ -114,21 +112,26 @@ int time1, time2; byte param1, param2, param3, param4; unsigned long flags; - ide_pio_data_t d; + struct ide_timing *t; + + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); + else + pio = XFER_PIO_0 + min_t(byte, pio, 4); - pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, &d); + t = ide_timing_find_mode(pio); /* calculate timing, according to PIO mode */ - time1 = d.cycle_time; - time2 = ide_pio_timings[pio].active_time; + time1 = t->cycle; + time2 = t->active; param3 = param1 = (time2 * system_bus_speed + 999) / 1000; param4 = param2 = (time1 * system_bus_speed + 999) / 1000 - param1; - if (pio < 3) { + if (pio < XFER_PIO_3) { param3 += 8; param4 += 8; } printk("%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n", - drive->name, pio, time1, time2, param1, param2, param3, param4); + drive->name, pio - XFER_PIO_0, time1, time2, param1, param2, param3, param4); /* stuff timing parameters into controller registers */ driveNum = (HWIF(drive)->index << 1) + drive->select.b.unit; diff -urN linux-2.5.6/drivers/ide/alim15x3.c linux-2.5.6-timing/drivers/ide/alim15x3.c --- linux-2.5.6/drivers/ide/alim15x3.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/alim15x3.c Tue Mar 12 16:26:03 2002 @@ -26,7 +26,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" #define DISPLAY_ALI_TIMINGS @@ -241,7 +241,7 @@ static void ali15x3_tune_drive (ide_drive_t *drive, byte pio) { - ide_pio_data_t d; + struct ide_timing *t; ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; int s_time, a_time, c_time; @@ -250,15 +250,21 @@ int port = hwif->index ? 0x5c : 0x58; int portFIFO = hwif->channel ? 0x55 : 0x54; byte cd_dma_fifo = 0; + + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); + else + pio = XFER_PIO_0 + min_t(byte, pio, 4); - pio = ide_get_best_pio_mode(drive, pio, 5, &d); - s_time = ide_pio_timings[pio].setup_time; - a_time = ide_pio_timings[pio].active_time; + t = ide_timing_find_mode(pio); + + s_time = t->setup; + a_time = t->active; if ((s_clc = (s_time * system_bus_speed + 999) / 1000) >= 8) s_clc = 0; if ((a_clc = (a_time * system_bus_speed + 999) / 1000) >= 8) a_clc = 0; - c_time = ide_pio_timings[pio].cycle_time; + c_time = t->cycle; #if 0 if ((r_clc = ((c_time - s_time - a_time) * system_bus_speed + 999) / 1000) >= 16) @@ -295,17 +301,6 @@ pci_write_config_byte(dev, port, s_clc); pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc); __restore_flags(flags); - - /* - * setup active rec - * { 70, 165, 365 }, PIO Mode 0 - * { 50, 125, 208 }, PIO Mode 1 - * { 30, 100, 110 }, PIO Mode 2 - * { 30, 80, 70 }, PIO Mode 3 with IORDY - * { 25, 70, 25 }, PIO Mode 4 with IORDY ns - * { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard) - */ - } static int ali15x3_tune_chipset (ide_drive_t *drive, byte speed) diff -urN linux-2.5.6/drivers/ide/amd74xx.c linux-2.5.6-timing/drivers/ide/amd74xx.c --- linux-2.5.6/drivers/ide/amd74xx.c Tue Mar 12 16:05:37 2002 +++ linux-2.5.6-timing/drivers/ide/amd74xx.c Tue Mar 12 16:26:03 2002 @@ -235,7 +235,7 @@ drive->dn >> 1, drive->dn & 1); T = 1000000000 / amd_clock; - UT = T / MIN(MAX(amd_config->flags & AMD_UDMA, 1), 2); + UT = T / min_t(int, max_t(int, amd_config->flags & AMD_UDMA, 1), 2); ide_timing_compute(drive, speed, &t, T, UT); @@ -270,7 +270,7 @@ return; } - amd_set_drive(drive, XFER_PIO_0 + MIN(pio, 5)); + amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5)); } #ifdef CONFIG_BLK_DEV_IDEDMA diff -urN linux-2.5.6/drivers/ide/cmd640.c linux-2.5.6-timing/drivers/ide/cmd640.c --- linux-2.5.6/drivers/ide/cmd640.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/cmd640.c Tue Mar 12 16:29:48 2002 @@ -112,7 +112,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" /* * This flag is set in ide.c by the parameter: ide0=cmd640_vlb @@ -589,15 +589,11 @@ /* * Set a specific pio_mode for a drive */ -static void cmd640_set_mode (unsigned int index, byte pio_mode, unsigned int cycle_time) +static void cmd640_set_mode (unsigned int index, byte pio_mode, unsigned int cycle_time, unsigned int active_time, unsigned int setup_time) { - int setup_time, active_time, recovery_time, clock_time; + int recovery_time, clock_time; byte setup_count, active_count, recovery_count, recovery_count2, cycle_count; - if (pio_mode > 5) - pio_mode = 5; - setup_time = ide_pio_timings[pio_mode].setup_time; - active_time = ide_pio_timings[pio_mode].active_time; recovery_time = cycle_time - (setup_time + active_time); clock_time = 1000 / system_bus_speed; cycle_count = (cycle_time + clock_time - 1) / clock_time; @@ -646,7 +642,7 @@ static void cmd640_tune_drive (ide_drive_t *drive, byte mode_wanted) { byte b; - ide_pio_data_t d; + struct ide_timing *t; unsigned int index = 0; while (drive != cmd_drives[index]) { @@ -674,14 +670,16 @@ return; } - (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d); - cmd640_set_mode (index, d.pio_mode, d.cycle_time); + if (mode_wanted == 255) + t = ide_timing_find_mode(ide_find_best_mode(drive, XFER_PIO | XFER_EPIO)); + else + t = ide_timing_find_mode(XFER_PIO_0 + min_t(byte, mode_wanted, 4)); + + cmd640_set_mode(index, t->mode - XFER_PIO_0, t->cycle, t->active, t->setup); + + printk ("%s: selected cmd640 PIO mode%d (%dns)", + drive->name, t->mode, t->cycle); - printk ("%s: selected cmd640 PIO mode%d (%dns)%s", - drive->name, - d.pio_mode, - d.cycle_time, - d.overridden ? " (overriding vendor mode)" : ""); display_clocks(index); return; } diff -urN linux-2.5.6/drivers/ide/cmd64x.c linux-2.5.6-timing/drivers/ide/cmd64x.c --- linux-2.5.6/drivers/ide/cmd64x.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/cmd64x.c Tue Mar 12 16:26:03 2002 @@ -23,7 +23,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" #ifndef SPLIT_BYTE #define SPLIT_BYTE(B,H,L) ((H)=(B>>4), (L)=(B-((B>>4)<<4))) @@ -279,10 +279,10 @@ */ static void cmd64x_tuneproc (ide_drive_t *drive, byte mode_wanted) { - int setup_time, active_time, recovery_time, clock_time, pio_mode, cycle_time; + int recovery_time, clock_time; byte recovery_count2, cycle_count; int setup_count, active_count, recovery_count; - ide_pio_data_t d; + struct ide_timing *t; switch (mode_wanted) { case 8: /* set prefetch off */ @@ -291,27 +291,21 @@ /*set_prefetch_mode(index, mode_wanted);*/ cmdprintk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis"); return; + case 255: mode_wanted = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); } - mode_wanted = ide_get_best_pio_mode (drive, mode_wanted, 5, &d); - pio_mode = d.pio_mode; - cycle_time = d.cycle_time; + t = ide_timing_find_mode(XFER_PIO_0 + min_t(byte, mode_wanted, 4)); /* * I copied all this complicated stuff from cmd640.c and made a few minor changes. * For now I am just going to pray that it is correct. */ - if (pio_mode > 5) - pio_mode = 5; - setup_time = ide_pio_timings[pio_mode].setup_time; - active_time = ide_pio_timings[pio_mode].active_time; - recovery_time = cycle_time - (setup_time + active_time); - clock_time = 1000 / system_bus_speed; - cycle_count = (cycle_time + clock_time - 1) / clock_time; - - setup_count = (setup_time + clock_time - 1) / clock_time; - active_count = (active_time + clock_time - 1) / clock_time; + recovery_time = t->cycle - (t->setup + t->active); + clock_time = 1000 / system_bus_speed; + cycle_count = (t->cycle + clock_time - 1) / clock_time; + setup_count = (t->setup + clock_time - 1) / clock_time; + active_count = (t->active + clock_time - 1) / clock_time; recovery_count = (recovery_time + clock_time - 1) / clock_time; recovery_count2 = cycle_count - (setup_count + active_count); @@ -334,9 +328,8 @@ */ program_drive_counts (drive, setup_count, active_count, recovery_count); - cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns)%s, clocks=%d/%d/%d\n", - drive->name, pio_mode, mode_wanted, cycle_time, - d.overridden ? " (overriding vendor mode)" : "", + cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns), clocks=%d/%d/%d\n", + drive->name, t.mode - XFER_PIO_0, mode_wanted, cycle_time, setup_count, active_count, recovery_count); } @@ -391,7 +384,7 @@ static void config_cmd64x_chipset_for_pio (ide_drive_t *drive, byte set_speed) { byte speed = 0x00; - byte set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL); + byte set_pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; cmd64x_tuneproc(drive, set_pio); speed = XFER_PIO_0 + set_pio; @@ -408,7 +401,7 @@ u8 speed = 0x00; u8 mode_pci = 0x00; u8 channel_timings = cmd680_taskfile_timing(hwif); - u8 set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL); + u8 set_pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; pci_read_config_byte(dev, addr_mask, &mode_pci); mode_pci &= ~((unit) ? 0x30 : 0x03); diff -urN linux-2.5.6/drivers/ide/cs5530.c linux-2.5.6-timing/drivers/ide/cs5530.c --- linux-2.5.6/drivers/ide/cs5530.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/cs5530.c Tue Mar 12 16:26:03 2002 @@ -27,7 +27,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" #define DISPLAY_CS5530_TIMINGS @@ -114,10 +114,13 @@ { ide_hwif_t *hwif = HWIF(drive); unsigned int format, basereg = CS5530_BASEREG(hwif); - static byte modes[5] = {XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4}; - pio = ide_get_best_pio_mode(drive, pio, 4, NULL); - if (!cs5530_set_xfer_mode(drive, modes[pio])) { + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); + else + pio = XFER_PIO_0 + min_t(byte, pio, 4); + + if (!cs5530_set_xfer_mode(drive, pio)) { format = (inl(basereg+4) >> 31) & 1; outl(cs5530_pio_timings[format][pio], basereg+(drive->select.b.unit<<3)); } diff -urN linux-2.5.6/drivers/ide/cy82c693.c linux-2.5.6-timing/drivers/ide/cy82c693.c --- linux-2.5.6/drivers/ide/cy82c693.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/cy82c693.c Tue Mar 12 16:26:03 2002 @@ -53,7 +53,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" /* the current version */ #define CY82_VERSION "CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)" @@ -140,8 +140,11 @@ */ static void compute_clocks (byte pio, pio_clocks_t *p_pclk) { + struct ide_timing *t; int clk1, clk2; + t = ide_timing_find_mode(XFER_PIO_0 + pio); + /* we don't check against CY82C693's min and max speed, * so you can play with the idebus=xx parameter */ @@ -150,15 +153,13 @@ pio = CY82C693_MAX_PIO; /* let's calc the address setup time clocks */ - p_pclk->address_time = (byte)calc_clk(ide_pio_timings[pio].setup_time, system_bus_speed); + p_pclk->address_time = (byte)calc_clk(t->setup, system_bus_speed); /* let's calc the active and recovery time clocks */ - clk1 = calc_clk(ide_pio_timings[pio].active_time, system_bus_speed); + clk1 = calc_clk(t->active, system_bus_speed); /* calc recovery timing */ - clk2 = ide_pio_timings[pio].cycle_time - - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + clk2 = t->cycle - t->active - t->setup; clk2 = calc_clk(clk2, system_bus_speed); @@ -166,7 +167,7 @@ /* note: we use the same values for 16bit IOR and IOW * those are all the same, since I don't have other - * timings than those from ide_modes.h + * timings than those from ide-timing.h */ p_pclk->time_16r = (byte)clk1; @@ -321,7 +322,7 @@ #endif /* CY82C693_DEBUG_LOGS */ /* first let's calc the pio modes */ - pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO, NULL); + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; #if CY82C693_DEBUG_INFO printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio); diff -urN linux-2.5.6/drivers/ide/dtc2278.c linux-2.5.6-timing/drivers/ide/dtc2278.c --- linux-2.5.6/drivers/ide/dtc2278.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/dtc2278.c Tue Mar 12 16:26:03 2002 @@ -15,7 +15,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" /* * Changing this #undef to #define may solve start up problems in some systems. @@ -70,7 +70,7 @@ { unsigned long flags; - pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; if (pio >= 3) { save_flags(flags); /* all CPUs */ diff -urN linux-2.5.6/drivers/ide/hpt34x.c linux-2.5.6-timing/drivers/ide/hpt34x.c --- linux-2.5.6/drivers/ide/hpt34x.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/hpt34x.c Tue Mar 12 16:26:03 2002 @@ -40,7 +40,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" #ifndef SPLIT_BYTE #define SPLIT_BYTE(B,H,L) ((H)=(B>>4), (L)=(B-((B>>4)<<4))) @@ -152,9 +152,9 @@ byte timing, speed, pio; - pio = ide_get_best_pio_mode(drive, 255, 5, NULL); + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; - if (xfer_pio> 4) + if (xfer_pio > 4) xfer_pio = 0; if (drive->id->eide_pio_iordy > 0) { diff -urN linux-2.5.6/drivers/ide/hpt366.c linux-2.5.6-timing/drivers/ide/hpt366.c --- linux-2.5.6/drivers/ide/hpt366.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/hpt366.c Tue Mar 12 16:26:03 2002 @@ -61,7 +61,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" #define DISPLAY_HPT366_TIMINGS @@ -600,9 +600,9 @@ unsigned short xfer_pio = drive->id->eide_pio_modes; byte timing, speed, pio; - pio = ide_get_best_pio_mode(drive, 255, 5, NULL); + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; - if (xfer_pio> 4) + if (xfer_pio > 4) xfer_pio = 0; if (drive->id->eide_pio_iordy > 0) { diff -urN linux-2.5.6/drivers/ide/ht6560b.c linux-2.5.6-timing/drivers/ide/ht6560b.c --- linux-2.5.6/drivers/ide/ht6560b.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/ht6560b.c Tue Mar 12 16:26:03 2002 @@ -44,7 +44,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" /* #define DEBUG */ /* remove comments for DEBUG messages */ @@ -199,20 +199,23 @@ { int active_time, recovery_time; int active_cycles, recovery_cycles; - ide_pio_data_t d; + struct ide_timing *t; if (pio) { - pio = ide_get_best_pio_mode(drive, pio, 5, &d); + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); + else + pio = XFER_PIO_0 + min_t(byte, pio, 4); + + t = ide_timing_find_mode(pio); /* * Just like opti621.c we try to calculate the * actual cycle time for recovery and activity * according system bus speed. */ - active_time = ide_pio_timings[pio].active_time; - recovery_time = d.cycle_time - - active_time - - ide_pio_timings[pio].setup_time; + active_time = t->active; + recovery_time = t->cycle - active_time - t->setup; /* * Cycle times should be Vesa bus cycles */ @@ -227,7 +230,8 @@ if (recovery_cycles > 15) recovery_cycles = 0; /* 0==16 */ #ifdef DEBUG - printk("ht6560b: drive %s setting pio=%d recovery=%d (%dns) active=%d (%dns)\n", drive->name, pio, recovery_cycles, recovery_time, active_cycles, active_time); + printk("ht6560b: drive %s setting pio=%d recovery=%d (%dns) active=%d (%dns)\n", + drive->name, pio - XFER_PIO_0, recovery_cycles, recovery_time, active_cycles, active_time); #endif return (byte)((recovery_cycles << 4) | active_cycles); diff -urN linux-2.5.6/drivers/ide/icside.c linux-2.5.6-timing/drivers/ide/icside.c --- linux-2.5.6/drivers/ide/icside.c Wed Feb 20 03:10:55 2002 +++ linux-2.5.6-timing/drivers/ide/icside.c Tue Mar 12 16:26:03 2002 @@ -351,90 +351,6 @@ return ide_error(drive, "dma_intr", stat); } -/* - * The following is a sick duplication from ide-dma.c ;( - * - * This should be defined in one place only. - */ -struct drive_list_entry { - char * id_model; - char * id_firmware; -}; - -static struct drive_list_entry drive_whitelist [] = { - { "Micropolis 2112A", "ALL" }, - { "CONNER CTMA 4000", "ALL" }, - { "CONNER CTT8000-A", "ALL" }, - { "ST34342A", "ALL" }, - { NULL, 0 } -}; - -static struct drive_list_entry drive_blacklist [] = { - { "WDC AC11000H", "ALL" }, - { "WDC AC22100H", "ALL" }, - { "WDC AC32500H", "ALL" }, - { "WDC AC33100H", "ALL" }, - { "WDC AC31600H", "ALL" }, - { "WDC AC32100H", "24.09P07" }, - { "WDC AC23200L", "21.10N21" }, - { "Compaq CRD-8241B", "ALL" }, - { "CRD-8400B", "ALL" }, - { "CRD-8480B", "ALL" }, - { "CRD-8480C", "ALL" }, - { "CRD-8482B", "ALL" }, - { "CRD-84", "ALL" }, - { "SanDisk SDP3B", "ALL" }, - { "SanDisk SDP3B-64", "ALL" }, - { "SANYO CD-ROM CRD", "ALL" }, - { "HITACHI CDR-8", "ALL" }, - { "HITACHI CDR-8335", "ALL" }, - { "HITACHI CDR-8435", "ALL" }, - { "Toshiba CD-ROM XM-6202B", "ALL" }, - { "CD-532E-A", "ALL" }, - { "E-IDE CD-ROM CR-840", "ALL" }, - { "CD-ROM Drive/F5A", "ALL" }, - { "RICOH CD-R/RW MP7083A", "ALL" }, - { "WPI CDD-820", "ALL" }, - { "SAMSUNG CD-ROM SC-148C", "ALL" }, - { "SAMSUNG CD-ROM SC-148F", "ALL" }, - { "SAMSUNG CD-ROM SC", "ALL" }, - { "SanDisk SDP3B-64", "ALL" }, - { "SAMSUNG CD-ROM SN-124", "ALL" }, - { "PLEXTOR CD-R PX-W8432T", "ALL" }, - { "ATAPI CD-ROM DRIVE 40X MAXIMUM", "ALL" }, - { "_NEC DV5800A", "ALL" }, - { NULL, 0 } -}; - -static int in_drive_list(struct hd_driveid *id, struct drive_list_entry * drive_table) -{ - for ( ; drive_table->id_model ; drive_table++) - if ((!strcmp(drive_table->id_model, id->model)) && - ((!strstr(drive_table->id_firmware, id->fw_rev)) || - (!strcmp(drive_table->id_firmware, "ALL")))) - return 1; - return 0; -} - -/* - * For both Blacklisted and Whitelisted drives. - * This is setup to be called as an extern for future support - * to other special driver code. - */ -static int icside_check_drive_lists(ide_drive_t *drive, int good_bad) -{ - struct hd_driveid *id = drive->id; - - if (good_bad) { - return in_drive_list(id, drive_whitelist); - } else { - int blacklist = in_drive_list(id, drive_blacklist); - if (blacklist) - printk("%s: Disabling DMA for %s\n", drive->name, id->model); - return(blacklist); - } - return 0; -} static int icside_dma_check(ide_drive_t *drive) @@ -449,14 +365,6 @@ goto out; /* - * Consult the list of known "bad" drives - */ - if (icside_check_drive_lists(drive, 0)) { - func = ide_dma_off; - goto out; - } - - /* * Enable DMA on any drive that has multiword DMA */ if (id->field_valid & 2) { @@ -473,16 +381,6 @@ goto out; } - /* - * Consult the list of known "good" drives - */ - if (icside_check_drive_lists(drive, 1)) { - if (id->eide_dma_time > 150) - goto out; - xfer_mode = XFER_MW_DMA_1; - func = ide_dma_on; - } - out: func = icside_config_if(drive, xfer_mode); @@ -562,11 +460,6 @@ case ide_dma_test_irq: return inb((unsigned long)hwif->hw.priv) & 1; - - case ide_dma_bad_drive: - case ide_dma_good_drive: - return icside_check_drive_lists(drive, (func == - ide_dma_good_drive)); case ide_dma_verbose: return icside_dma_verbose(drive); diff -urN linux-2.5.6/drivers/ide/ide-m8xx.c linux-2.5.6-timing/drivers/ide/ide-m8xx.c --- linux-2.5.6/drivers/ide/ide-m8xx.c Wed Feb 20 03:11:02 2002 +++ linux-2.5.6-timing/drivers/ide/ide-m8xx.c Tue Mar 12 16:26:03 2002 @@ -37,7 +37,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" static int identify (volatile unsigned char *p); static void print_fixed (volatile unsigned char *p); static void print_funcid (int func); @@ -222,19 +222,19 @@ /* Compute clock cycles for PIO timings */ for (i=0; i<6; ++i) { bd_t *binfo = (bd_t *)__res; + struct ide_timing *t; + + t = ide_timing_find_mode(i + XFER_PIO_0); hold_time[i] = PCMCIA_MK_CLKS (hold_time[i], binfo->bi_busfreq); ide_pio_clocks[i].setup_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].setup_time, - binfo->bi_busfreq); + PCMCIA_MK_CLKS (t->setup, binfo->bi_busfreq); ide_pio_clocks[i].active_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].active_time, - binfo->bi_busfreq); + PCMCIA_MK_CLKS (t->active, binfo->bi_busfreq); ide_pio_clocks[i].cycle_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].cycle_time, - binfo->bi_busfreq); + PCMCIA_MK_CLKS (t->cycle, binfo->bi_busfreq); #if 0 printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n", i, @@ -242,10 +242,7 @@ ide_pio_clocks[i].active_time, ide_pio_clocks[i].hold_time, ide_pio_clocks[i].cycle_time, - ide_pio_timings[i].setup_time, - ide_pio_timings[i].active_time, - ide_pio_timings[i].hold_time, - ide_pio_timings[i].cycle_time); + t->setup, t->active, hold_time[i], t->cycle); #endif } } @@ -429,13 +426,13 @@ static void m8xx_ide_tuneproc(ide_drive_t *drive, byte pio) { - ide_pio_data_t d; #if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) volatile pcmconf8xx_t *pcmp; ulong timing, mask, reg; #endif - pio = ide_get_best_pio_mode(drive, pio, 4, &d); + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; #if 1 printk("%s[%d] %s: best PIO mode: %d\n", diff -urN linux-2.5.6/drivers/ide/ide-pmac.c linux-2.5.6-timing/drivers/ide/ide-pmac.c --- linux-2.5.6/drivers/ide/ide-pmac.c Wed Feb 20 03:11:04 2002 +++ linux-2.5.6-timing/drivers/ide/ide-pmac.c Tue Mar 12 16:26:03 2002 @@ -36,7 +36,7 @@ #include #include #endif -#include "ide_modes.h" +#include "ide-timing.h" extern char *ide_dmafunc_verbose(ide_dma_action_t dmafunc); @@ -282,7 +282,7 @@ static void pmac_ide_tuneproc(ide_drive_t *drive, byte pio) { - ide_pio_data_t d; + struct ide_timing *t; int i; u32 *timings; int accessTicks, recTicks; @@ -290,9 +290,15 @@ i = pmac_ide_find(drive); if (i < 0) return; + + if (pio = 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); + else + pio = XFER_PIO_0 + min_t(byte, pio, 4); - pio = ide_get_best_pio_mode(drive, pio, 4, &d); - accessTicks = SYSCLK_TICKS(ide_pio_timings[pio].active_time); + t = ide_timing_find_mode(pio); + + accessTicks = SYSCLK_TICKS(t->active); if (drive->select.all & 0x10) timings = &pmac_ide[i].timings[1]; else @@ -300,16 +306,16 @@ if (pmac_ide[i].kind == controller_kl_ata4) { /* The "ata-4" IDE controller of Core99 machines */ - accessTicks = SYSCLK_TICKS_UDMA(ide_pio_timings[pio].active_time * 1000); - recTicks = SYSCLK_TICKS_UDMA(d.cycle_time * 1000) - accessTicks; + accessTicks = SYSCLK_TICKS_UDMA(t->active * 1000); + recTicks = SYSCLK_TICKS_UDMA(t->cycle * 1000) - accessTicks; *timings = ((*timings) & 0x1FFFFFC00) | accessTicks | (recTicks << 5); } else { /* The old "ata-3" IDE controller */ - accessTicks = SYSCLK_TICKS(ide_pio_timings[pio].active_time); + accessTicks = SYSCLK_TICKS(t->active); if (accessTicks < 4) accessTicks = 4; - recTicks = SYSCLK_TICKS(d.cycle_time) - accessTicks - 4; + recTicks = SYSCLK_TICKS(t->cycle) - accessTicks - 4; if (recTicks < 1) recTicks = 1; diff -urN linux-2.5.6/drivers/ide/ide-timing.c linux-2.5.6-timing/drivers/ide/ide-timing.c --- linux-2.5.6/drivers/ide/ide-timing.c Thu Jan 1 01:00:00 1970 +++ linux-2.5.6-timing/drivers/ide/ide-timing.c Tue Mar 12 16:26:03 2002 @@ -0,0 +1,235 @@ +/* + * $Id: ide-timing.c,v 2.0 2002/03/12 15:48:43 vojtech Exp $ + * + * Copyright (c) 1999-2001 Vojtech Pavlik + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to , or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic + */ + +#include +#include "ide-timing.h" + +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +struct ide_timing ide_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + + { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + + { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + + { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, + + { -1 } +}; + +short ide_find_best_mode(ide_drive_t *drive, int map) +{ + struct hd_driveid *id = drive->id; + short best = 0; + + if (!id) + return XFER_PIO_SLOW; + + if ((map & XFER_UDMA) && (id->field_valid & 4)) { /* Want UDMA and UDMA bitmap valid */ + + if ((map & XFER_UDMA_133) == XFER_UDMA_133) + if ((best = (id->dma_ultra & 0x0040) ? XFER_UDMA_6 : 0)) return best; + + if ((map & XFER_UDMA_100) == XFER_UDMA_100) + if ((best = (id->dma_ultra & 0x0020) ? XFER_UDMA_5 : 0)) return best; + + if ((map & XFER_UDMA_66) == XFER_UDMA_66) + if ((best = (id->dma_ultra & 0x0010) ? XFER_UDMA_4 : + (id->dma_ultra & 0x0008) ? XFER_UDMA_3 : 0)) return best; + + if ((best = (id->dma_ultra & 0x0004) ? XFER_UDMA_2 : + (id->dma_ultra & 0x0002) ? XFER_UDMA_1 : + (id->dma_ultra & 0x0001) ? XFER_UDMA_0 : 0)) return best; + } + + if ((map & XFER_MWDMA) && (id->field_valid & 2)) { /* Want MWDMA and drive has EIDE fields */ + + if ((best = (id->dma_mword & 0x0004) ? XFER_MW_DMA_2 : + (id->dma_mword & 0x0002) ? XFER_MW_DMA_1 : + (id->dma_mword & 0x0001) ? XFER_MW_DMA_0 : 0)) return best; + } + + if (map & XFER_SWDMA) { /* Want SWDMA */ + + if (id->field_valid & 2) { /* EIDE SWDMA */ + + if ((best = (id->dma_1word & 0x0004) ? XFER_SW_DMA_2 : + (id->dma_1word & 0x0002) ? XFER_SW_DMA_1 : + (id->dma_1word & 0x0001) ? XFER_SW_DMA_0 : 0)) return best; + } + + if (id->capability & 1) { /* Pre-EIDE style SWDMA */ + + if ((best = (id->tDMA == 2) ? XFER_SW_DMA_2 : + (id->tDMA == 1) ? XFER_SW_DMA_1 : + (id->tDMA == 0) ? XFER_SW_DMA_0 : 0)) return best; + } + } + + + if ((map & XFER_EPIO) && (id->field_valid & 2)) { /* EIDE PIO modes */ + + if ((best = (drive->id->eide_pio_modes & 4) ? XFER_PIO_5 : + (drive->id->eide_pio_modes & 2) ? XFER_PIO_4 : + (drive->id->eide_pio_modes & 1) ? XFER_PIO_3 : 0)) return best; + } + + return (drive->id->tPIO == 2) ? XFER_PIO_2 : + (drive->id->tPIO == 1) ? XFER_PIO_1 : + (drive->id->tPIO == 0) ? XFER_PIO_0 : XFER_PIO_SLOW; +} + +void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct ide_timing *m, unsigned int what) +{ + if (what & IDE_TIMING_SETUP ) m->setup = max(a->setup, b->setup); + if (what & IDE_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); + if (what & IDE_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); + if (what & IDE_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & IDE_TIMING_ACTIVE ) m->active = max(a->active, b->active); + if (what & IDE_TIMING_RECOVER) m->recover = max(a->recover, b->recover); + if (what & IDE_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); + if (what & IDE_TIMING_UDMA ) m->udma = max(a->udma, b->udma); +} + +struct ide_timing* ide_timing_find_mode(short speed) +{ + struct ide_timing *t; + + for (t = ide_timing; t->mode != speed; t++) + if (t->mode < 0) + return NULL; + return t; +} + +int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing *t, int T, int UT) +{ + struct hd_driveid *id = drive->id; + struct ide_timing *s, p; + +/* + * Find the mode. + */ + + if (!(s = ide_timing_find_mode(speed))) + return -EINVAL; + +/* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MWDMA cycle timing. + */ + + if (id && id->field_valid & 2) { /* EIDE drive */ + + memset(&p, 0, sizeof(p)); + + switch (speed & XFER_MODE) { + + case XFER_PIO: + if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = id->eide_pio; + else p.cycle = p.cyc8b = id->eide_pio_iordy; + break; + + case XFER_MWDMA: + p.cycle = id->eide_dma_min; + break; + } + + ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); + } + +/* + * Convert the timing to bus clock counts. + */ + + ide_timing_quantize(s, t, T, UT); + +/* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T + * and some other commands. We have to ensure that the DMA cycle timing is + * slower/equal than the fastest PIO timing. + */ + + if ((speed & XFER_MODE) != XFER_PIO) { + ide_timing_compute(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO), &p, T, UT); + ide_timing_merge(&p, t, t, IDE_TIMING_ALL); + } + +/* + * Lenghten active & recovery time so that cycle time is correct. + */ + + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} diff -urN linux-2.5.6/drivers/ide/ide-timing.h linux-2.5.6-timing/drivers/ide/ide-timing.h --- linux-2.5.6/drivers/ide/ide-timing.h Wed Feb 20 03:11:04 2002 +++ linux-2.5.6-timing/drivers/ide/ide-timing.h Tue Mar 12 16:29:03 2002 @@ -1,10 +1,11 @@ -#ifndef _IDE_TIMING_H -#define _IDE_TIMING_H +#ifndef _IDE_MODES_H +#define _IDE_MODES_H /* - * $Id: ide-timing.h,v 1.6 2001/12/23 22:47:56 vojtech Exp $ + * $Id: ide-timing.h,v 2.0 2002/03/12 13:02:22 vojtech Exp $ * - * Copyright (c) 1999-2001 Vojtech Pavlik + * Copyright (C) 1996 Linus Torvalds, Igor Abramov, and Mark Lord + * Copyright (C) 1999-2001 Vojtech Pavlik */ /* @@ -21,13 +22,10 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to , or by paper mail: - * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ #include +#include #define XFER_PIO_5 0x0d #define XFER_UDMA_SLOW 0x4f @@ -44,46 +42,7 @@ short udma; /* t2CYCTYP/2 */ }; -/* - * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). - * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. - */ - -static struct ide_timing ide_timing[] = { - - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, - - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - - { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, - - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - - { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - - { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, - - { -1 } -}; +extern struct ide_timing ide_timing[]; #define IDE_TIMING_SETUP 0x01 #define IDE_TIMING_ACT8B 0x02 @@ -96,9 +55,7 @@ #define IDE_TIMING_UDMA 0x80 #define IDE_TIMING_ALL 0xff -#define MIN(a,b) ((a)<(b)?(a):(b)) -#define MAX(a,b) ((a)>(b)?(a):(b)) -#define FIT(v,min,max) MAX(MIN(v,max),min) +#define FIT(v,x,y) max_t(int,min_t(int,v,x),y) #define ENOUGH(v,unit) (((v)-1)/(unit)+1) #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) @@ -112,170 +69,20 @@ #define XFER_EPIO 0x01 #define XFER_PIO 0x00 -static short ide_find_best_mode(ide_drive_t *drive, int map) -{ - struct hd_driveid *id = drive->id; - short best = 0; - - if (!id) - return XFER_PIO_SLOW; - - if ((map & XFER_UDMA) && (id->field_valid & 4)) { /* Want UDMA and UDMA bitmap valid */ - - if ((map & XFER_UDMA_133) == XFER_UDMA_133) - if ((best = (id->dma_ultra & 0x0040) ? XFER_UDMA_6 : 0)) return best; - - if ((map & XFER_UDMA_100) == XFER_UDMA_100) - if ((best = (id->dma_ultra & 0x0020) ? XFER_UDMA_5 : 0)) return best; - - if ((map & XFER_UDMA_66) == XFER_UDMA_66) - if ((best = (id->dma_ultra & 0x0010) ? XFER_UDMA_4 : - (id->dma_ultra & 0x0008) ? XFER_UDMA_3 : 0)) return best; - - if ((best = (id->dma_ultra & 0x0004) ? XFER_UDMA_2 : - (id->dma_ultra & 0x0002) ? XFER_UDMA_1 : - (id->dma_ultra & 0x0001) ? XFER_UDMA_0 : 0)) return best; - } - - if ((map & XFER_MWDMA) && (id->field_valid & 2)) { /* Want MWDMA and drive has EIDE fields */ - - if ((best = (id->dma_mword & 0x0004) ? XFER_MW_DMA_2 : - (id->dma_mword & 0x0002) ? XFER_MW_DMA_1 : - (id->dma_mword & 0x0001) ? XFER_MW_DMA_0 : 0)) return best; - } - - if (map & XFER_SWDMA) { /* Want SWDMA */ - - if (id->field_valid & 2) { /* EIDE SWDMA */ - - if ((best = (id->dma_1word & 0x0004) ? XFER_SW_DMA_2 : - (id->dma_1word & 0x0002) ? XFER_SW_DMA_1 : - (id->dma_1word & 0x0001) ? XFER_SW_DMA_0 : 0)) return best; - } - - if (id->capability & 1) { /* Pre-EIDE style SWDMA */ - - if ((best = (id->tDMA == 2) ? XFER_SW_DMA_2 : - (id->tDMA == 1) ? XFER_SW_DMA_1 : - (id->tDMA == 0) ? XFER_SW_DMA_0 : 0)) return best; - } - } - - - if ((map & XFER_EPIO) && (id->field_valid & 2)) { /* EIDE PIO modes */ - - if ((best = (drive->id->eide_pio_modes & 4) ? XFER_PIO_5 : - (drive->id->eide_pio_modes & 2) ? XFER_PIO_4 : - (drive->id->eide_pio_modes & 1) ? XFER_PIO_3 : 0)) return best; - } - - return (drive->id->tPIO == 2) ? XFER_PIO_2 : - (drive->id->tPIO == 1) ? XFER_PIO_1 : - (drive->id->tPIO == 0) ? XFER_PIO_0 : XFER_PIO_SLOW; -} - -static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT) -{ - q->setup = EZ(t->setup * 1000, T); - q->act8b = EZ(t->act8b * 1000, T); - q->rec8b = EZ(t->rec8b * 1000, T); - q->cyc8b = EZ(t->cyc8b * 1000, T); - q->active = EZ(t->active * 1000, T); - q->recover = EZ(t->recover * 1000, T); - q->cycle = EZ(t->cycle * 1000, T); - q->udma = EZ(t->udma * 1000, UT); -} - -static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct ide_timing *m, unsigned int what) -{ - if (what & IDE_TIMING_SETUP ) m->setup = MAX(a->setup, b->setup); - if (what & IDE_TIMING_ACT8B ) m->act8b = MAX(a->act8b, b->act8b); - if (what & IDE_TIMING_REC8B ) m->rec8b = MAX(a->rec8b, b->rec8b); - if (what & IDE_TIMING_CYC8B ) m->cyc8b = MAX(a->cyc8b, b->cyc8b); - if (what & IDE_TIMING_ACTIVE ) m->active = MAX(a->active, b->active); - if (what & IDE_TIMING_RECOVER) m->recover = MAX(a->recover, b->recover); - if (what & IDE_TIMING_CYCLE ) m->cycle = MAX(a->cycle, b->cycle); - if (what & IDE_TIMING_UDMA ) m->udma = MAX(a->udma, b->udma); -} - -static struct ide_timing* ide_timing_find_mode(short speed) -{ - struct ide_timing *t; - - for (t = ide_timing; t->mode != speed; t++) - if (t->mode < 0) - return NULL; - return t; -} - -static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing *t, int T, int UT) -{ - struct hd_driveid *id = drive->id; - struct ide_timing *s, p; - -/* - * Find the mode. - */ - - if (!(s = ide_timing_find_mode(speed))) - return -EINVAL; - -/* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MWDMA cycle timing. - */ - - if (id && id->field_valid & 2) { /* EIDE drive */ - - memset(&p, 0, sizeof(p)); - - switch (speed & XFER_MODE) { - - case XFER_PIO: - if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = id->eide_pio; - else p.cycle = p.cyc8b = id->eide_pio_iordy; - break; - - case XFER_MWDMA: - p.cycle = id->eide_dma_min; - break; - } - - ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); - } +extern short ide_find_best_mode(ide_drive_t *drive, int map); +extern void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT); +extern void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct ide_timing *m, unsigned int what); +extern struct ide_timing* ide_timing_find_mode(short speed); +extern int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing *t, int T, int UT); /* - * Convert the timing to bus clock counts. + * Backward compatibility stuff. */ - ide_timing_quantize(s, t, T, UT); - -/* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T - * and some other commands. We have to ensure that the DMA cycle timing is - * slower/equal than the fastest PIO timing. - */ - - if ((speed & XFER_MODE) != XFER_PIO) { - ide_timing_compute(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO), &p, T, UT); - ide_timing_merge(&p, t, t, IDE_TIMING_ALL); - } - -/* - * Lenghten active & recovery time so that cycle time is correct. - */ - - if (t->act8b + t->rec8b < t->cyc8b) { - t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; - t->rec8b = t->cyc8b - t->act8b; - } - - if (t->active + t->recover < t->cycle) { - t->active += (t->cycle - (t->active + t->recover)) / 2; - t->recover = t->cycle - t->active; - } - - return 0; -} +typedef struct ide_pio_timings_s { + int setup_time; /* Address setup (ns) minimum */ + int active_time; /* Active pulse (ns) minimum */ + int cycle_time; /* Cycle time (ns) minimum = (setup + active + recovery) */ +} ide_pio_timings_t; #endif diff -urN linux-2.5.6/drivers/ide/ide.c linux-2.5.6-timing/drivers/ide/ide.c --- linux-2.5.6/drivers/ide/ide.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/ide.c Tue Mar 12 16:26:03 2002 @@ -149,7 +149,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" /* * Those will be moved into separate header files eventually. @@ -194,94 +194,6 @@ extern void pnpide_init(int); #endif -/* - * Constant tables for PIO mode programming: - */ -const ide_pio_timings_t ide_pio_timings[6] = { - { 70, 165, 600 }, /* PIO Mode 0 */ - { 50, 125, 383 }, /* PIO Mode 1 */ - { 30, 100, 240 }, /* PIO Mode 2 */ - { 30, 80, 180 }, /* PIO Mode 3 with IORDY */ - { 25, 70, 120 }, /* PIO Mode 4 with IORDY */ - { 20, 50, 100 } /* PIO Mode 5 with IORDY (nonstandard) */ -}; - -/* - * Black list. Some drives incorrectly report their maximal PIO mode, - * at least in respect to CMD640. Here we keep info on some known drives. - */ -static struct ide_pio_info { - const char *name; - int pio; -} ide_pio_blacklist[] = { -/* { "Conner Peripherals 1275MB - CFS1275A", 4 }, */ - { "Conner Peripherals 540MB - CFS540A", 3 }, - - { "WDC AC2700", 3 }, - { "WDC AC2540", 3 }, - { "WDC AC2420", 3 }, - { "WDC AC2340", 3 }, - { "WDC AC2250", 0 }, - { "WDC AC2200", 0 }, - { "WDC AC21200", 4 }, - { "WDC AC2120", 0 }, - { "WDC AC2850", 3 }, - { "WDC AC1270", 3 }, - { "WDC AC1170", 1 }, - { "WDC AC1210", 1 }, - { "WDC AC280", 0 }, -/* { "WDC AC21000", 4 }, */ - { "WDC AC31000", 3 }, - { "WDC AC31200", 3 }, -/* { "WDC AC31600", 4 }, */ - - { "Maxtor 7131 AT", 1 }, - { "Maxtor 7171 AT", 1 }, - { "Maxtor 7213 AT", 1 }, - { "Maxtor 7245 AT", 1 }, - { "Maxtor 7345 AT", 1 }, - { "Maxtor 7546 AT", 3 }, - { "Maxtor 7540 AV", 3 }, - - { "SAMSUNG SHD-3121A", 1 }, - { "SAMSUNG SHD-3122A", 1 }, - { "SAMSUNG SHD-3172A", 1 }, - -/* { "ST51080A", 4 }, - * { "ST51270A", 4 }, - * { "ST31220A", 4 }, - * { "ST31640A", 4 }, - * { "ST32140A", 4 }, - * { "ST3780A", 4 }, - */ - { "ST5660A", 3 }, - { "ST3660A", 3 }, - { "ST3630A", 3 }, - { "ST3655A", 3 }, - { "ST3391A", 3 }, - { "ST3390A", 1 }, - { "ST3600A", 1 }, - { "ST3290A", 0 }, - { "ST3144A", 0 }, - { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on - * drive) according to Seagates FIND-ATA program */ - - { "QUANTUM ELS127A", 0 }, - { "QUANTUM ELS170A", 0 }, - { "QUANTUM LPS240A", 0 }, - { "QUANTUM LPS210A", 3 }, - { "QUANTUM LPS270A", 3 }, - { "QUANTUM LPS365A", 3 }, - { "QUANTUM LPS540A", 3 }, - { "QUANTUM LIGHTNING 540A", 3 }, - { "QUANTUM LIGHTNING 730A", 3 }, - - { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */ - { "QUANTUM FIREBALL_640", 3 }, - { "QUANTUM FIREBALL_1080", 3 }, - { "QUANTUM FIREBALL_1280", 3 }, - { NULL, 0 } -}; /* default maximum number of failures */ #define IDE_DEFAULT_MAX_FAILURES 1 @@ -314,105 +226,6 @@ */ ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ - -/* - * This routine searches the ide_pio_blacklist for an entry - * matching the start/whole of the supplied model name. - * - * Returns -1 if no match found. - * Otherwise returns the recommended PIO mode from ide_pio_blacklist[]. - */ -int ide_scan_pio_blacklist (char *model) -{ - struct ide_pio_info *p; - - for (p = ide_pio_blacklist; p->name != NULL; p++) { - if (strncmp(p->name, model, strlen(p->name)) == 0) - return p->pio; - } - return -1; -} - -/* - * This routine returns the recommended PIO settings for a given drive, - * based on the drive->id information and the ide_pio_blacklist[]. - * This is used by most chipset support modules when "auto-tuning". - */ - -/* - * Drive PIO mode auto selection - */ -byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d) -{ - int pio_mode; - int cycle_time = 0; - int use_iordy = 0; - struct hd_driveid* id = drive->id; - int overridden = 0; - int blacklisted = 0; - - if (mode_wanted != 255) { - pio_mode = mode_wanted; - } else if (!drive->id) { - pio_mode = 0; - } else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) { - overridden = 1; - blacklisted = 1; - use_iordy = (pio_mode > 2); - } else { - pio_mode = id->tPIO; - if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ - pio_mode = 2; - overridden = 1; - } - if (id->field_valid & 2) { /* drive implements ATA2? */ - if (id->capability & 8) { /* drive supports use_iordy? */ - use_iordy = 1; - cycle_time = id->eide_pio_iordy; - if (id->eide_pio_modes & 7) { - overridden = 0; - if (id->eide_pio_modes & 4) - pio_mode = 5; - else if (id->eide_pio_modes & 2) - pio_mode = 4; - else - pio_mode = 3; - } - } else { - cycle_time = id->eide_pio; - } - } - -#if 0 - if (drive->id->major_rev_num & 0x0004) printk("ATA-2 "); -#endif - - /* - * Conservative "downgrade" for all pre-ATA2 drives - */ - if (pio_mode && pio_mode < 4) { - pio_mode--; - overridden = 1; -#if 0 - use_iordy = (pio_mode > 2); -#endif - if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time) - cycle_time = 0; /* use standard timing */ - } - } - if (pio_mode > max_mode) { - pio_mode = max_mode; - cycle_time = 0; - } - if (d) { - d->pio_mode = pio_mode; - d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time; - d->use_iordy = use_iordy; - d->overridden = overridden; - d->blacklisted = blacklisted; - } - return pio_mode; -} #if (DISK_RECOVERY_TIME > 0) /* diff -urN linux-2.5.6/drivers/ide/ide_modes.h linux-2.5.6-timing/drivers/ide/ide_modes.h --- linux-2.5.6/drivers/ide/ide_modes.h Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/ide_modes.h Thu Jan 1 01:00:00 1970 @@ -1,42 +0,0 @@ -/* - * linux/drivers/ide/ide_modes.h - * - * Copyright (C) 1996 Linus Torvalds, Igor Abramov, and Mark Lord - */ - -#ifndef _IDE_MODES_H -#define _IDE_MODES_H - -#include - -/* - * Shared data/functions for determining best PIO mode for an IDE drive. - */ - -#ifdef CONFIG_BLK_DEV_IDE_MODES - -/* - * Standard (generic) timings for PIO modes, from ATA2 specification. - * These timings are for access to the IDE data port register *only*. - * Some drives may specify a mode, while also specifying a different - * value for cycle_time (from drive identification data). - */ -typedef struct ide_pio_timings_s { - int setup_time; /* Address setup (ns) minimum */ - int active_time; /* Active pulse (ns) minimum */ - int cycle_time; /* Cycle time (ns) minimum = (setup + active + recovery) */ -} ide_pio_timings_t; - -typedef struct ide_pio_data_s { - byte pio_mode; - byte use_iordy; - byte overridden; - byte blacklisted; - unsigned int cycle_time; -} ide_pio_data_t; - -extern int ide_scan_pio_blacklist (char *model); -extern byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d); -extern const ide_pio_timings_t ide_pio_timings[6]; -#endif -#endif diff -urN linux-2.5.6/drivers/ide/it8172.c linux-2.5.6-timing/drivers/ide/it8172.c --- linux-2.5.6/drivers/ide/it8172.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/it8172.c Tue Mar 12 16:26:03 2002 @@ -41,7 +41,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" /* * Prototypes @@ -65,7 +65,11 @@ int master_port = 0x40; int slave_port = 0x44; - pio = ide_get_best_pio_mode(drive, pio, 5, NULL); + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; + else + pio = min_t(byte, pio, 4); + pci_read_config_word(HWIF(drive)->pci_dev, master_port, &master_data); pci_read_config_dword(HWIF(drive)->pci_dev, slave_port, &slave_data); @@ -186,25 +190,7 @@ struct hd_driveid *id = drive->id; byte speed; - if (id->dma_ultra & 0x0010) { - speed = XFER_UDMA_2; - } else if (id->dma_ultra & 0x0008) { - speed = XFER_UDMA_1; - } else if (id->dma_ultra & 0x0004) { - speed = XFER_UDMA_2; - } else if (id->dma_ultra & 0x0002) { - speed = XFER_UDMA_1; - } else if (id->dma_ultra & 0x0001) { - speed = XFER_UDMA_0; - } else if (id->dma_mword & 0x0004) { - speed = XFER_MW_DMA_2; - } else if (id->dma_mword & 0x0002) { - speed = XFER_MW_DMA_1; - } else if (id->dma_1word & 0x0004) { - speed = XFER_SW_DMA_2; - } else { - speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); - } + speed = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | XFER_UDMA); (void) it8172_tune_chipset(drive, speed); diff -urN linux-2.5.6/drivers/ide/opti621.c linux-2.5.6-timing/drivers/ide/opti621.c --- linux-2.5.6/drivers/ide/opti621.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/opti621.c Tue Mar 12 16:26:03 2002 @@ -97,7 +97,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" #define OPTI621_MAX_PIO 3 /* In fact, I do not have any PIO 4 drive @@ -144,12 +144,16 @@ int d; ide_hwif_t *hwif = HWIF(drive); - drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO, NULL); + if (pio == PIO_DONT_KNOW) + drive->drive_data = min(ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0, OPTI621_MAX_PIO); + else + drive->drive_data = pio; + for (d = 0; d < 2; ++d) { drive = &hwif->drives[d]; if (drive->present) { if (drive->drive_data == PIO_DONT_KNOW) - drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO, NULL); + drive->drive_data = min(ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0, OPTI621_MAX_PIO); #ifdef OPTI621_DEBUG printk("%s: Selected PIO mode %d\n", drive->name, drive->drive_data); #endif diff -urN linux-2.5.6/drivers/ide/pdc202xx.c linux-2.5.6-timing/drivers/ide/pdc202xx.c --- linux-2.5.6/drivers/ide/pdc202xx.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/pdc202xx.c Tue Mar 12 16:26:03 2002 @@ -46,7 +46,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" #define PDC202XX_DEBUG_DRIVE_INFO 0 #define PDC202XX_DECODE_REGISTER_INFO 0 @@ -681,8 +681,10 @@ { byte speed = 0x00; - pio = (pio == 5) ? 4 : pio; - speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL); + if (pio == 255) + speed = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); + else + speed = XFER_PIO_0 + min_t(byte, pio, 4); return ((int) pdc202xx_tune_chipset(drive, speed)); } diff -urN linux-2.5.6/drivers/ide/pdcadma.c linux-2.5.6-timing/drivers/ide/pdcadma.c --- linux-2.5.6/drivers/ide/pdcadma.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/pdcadma.c Tue Mar 12 16:26:03 2002 @@ -24,7 +24,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" #undef DISPLAY_PDCADMA_TIMINGS diff -urN linux-2.5.6/drivers/ide/piix.c linux-2.5.6-timing/drivers/ide/piix.c --- linux-2.5.6/drivers/ide/piix.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/piix.c Tue Mar 12 16:26:03 2002 @@ -65,7 +65,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" #define PIIX_DEBUG_DRIVE_INFO 0 @@ -225,7 +225,11 @@ { 2, 1 }, { 2, 3 }, }; - pio = ide_get_best_pio_mode(drive, pio, 5, NULL); + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; + else + pio = min_t(byte, pio, 4); + pci_read_config_word(HWIF(drive)->pci_dev, master_port, &master_data); if (is_slave) { master_data = master_data | 0x4000; @@ -352,27 +356,9 @@ (dev->device == PCI_DEVICE_ID_INTEL_82451NX) || (dev->device == PCI_DEVICE_ID_INTEL_82801AB_1)) ? 1 : 0; - if ((id->dma_ultra & 0x0020) && (udma_66) && (ultra100)) { - speed = XFER_UDMA_5; - } else if ((id->dma_ultra & 0x0010) && (ultra)) { - speed = ((udma_66) && (ultra66)) ? XFER_UDMA_4 : XFER_UDMA_2; - } else if ((id->dma_ultra & 0x0008) && (ultra)) { - speed = ((udma_66) && (ultra66)) ? XFER_UDMA_3 : XFER_UDMA_1; - } else if ((id->dma_ultra & 0x0004) && (ultra)) { - speed = XFER_UDMA_2; - } else if ((id->dma_ultra & 0x0002) && (ultra)) { - speed = XFER_UDMA_1; - } else if ((id->dma_ultra & 0x0001) && (ultra)) { - speed = XFER_UDMA_0; - } else if (id->dma_mword & 0x0004) { - speed = XFER_MW_DMA_2; - } else if (id->dma_mword & 0x0002) { - speed = XFER_MW_DMA_1; - } else if (id->dma_1word & 0x0004) { - speed = XFER_SW_DMA_2; - } else { - speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); - } + speed = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA + | (ultra ? XFER_UDMA : 0) | ((udma_66 & ultra66) ? XFER_UDMA_66 : 0) + | ((udma_66 & ultra100) ? XFER_UDMA_100 : 0)); (void) piix_tune_chipset(drive, speed); @@ -385,7 +371,7 @@ static void config_chipset_for_pio (ide_drive_t *drive) { - piix_tune_drive(drive, ide_get_best_pio_mode(drive, 255, 5, NULL)); + piix_tune_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0); } static int config_drive_xfer_rate (ide_drive_t *drive) diff -urN linux-2.5.6/drivers/ide/qd65xx.c linux-2.5.6-timing/drivers/ide/qd65xx.c --- linux-2.5.6/drivers/ide/qd65xx.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/qd65xx.c Tue Mar 12 16:26:03 2002 @@ -33,7 +33,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" #include "qd65xx.h" /* @@ -249,42 +249,46 @@ static void qd6580_tune_drive (ide_drive_t *drive, byte pio) { - ide_pio_data_t d; + struct ide_timing *t; int base = HWIF(drive)->select_data; int active_time = 175; int recovery_time = 415; /* worst case values from the dos driver */ if (drive->id && !qd_find_disk_type(drive,&active_time,&recovery_time)) { - pio = ide_get_best_pio_mode(drive, pio, 255, &d); - pio = min(pio,4); + + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); + else + pio = XFER_PIO_0 + min_t(byte, pio, 4); + + t = ide_timing_find_mode(pio); switch (pio) { case 0: break; case 3: - if (d.cycle_time >= 110) { + if (t->cycle >= 110) { active_time = 86; - recovery_time = d.cycle_time-102; + recovery_time = t->cycle-102; } else printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name); break; case 4: - if (d.cycle_time >= 69) { + if (t->cycle >= 69) { active_time = 70; - recovery_time = d.cycle_time-61; + recovery_time = t->cycle-61; } else printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name); break; default: - if (d.cycle_time >= 180) { + if (t->cycle >= 180) { active_time = 110; - recovery_time = d.cycle_time - 120; + recovery_time = t->cycle - 120; } else { - active_time = ide_pio_timings[pio].active_time; - recovery_time = d.cycle_time - -active_time; + active_time = t->active; + recovery_time = t->cycle - active_time; } } - printk(KERN_INFO "%s: PIO mode%d\n",drive->name,pio); + printk(KERN_INFO "%s: PIO mode%d\n", drive->name, pio - XFER_PIO_0); } if (!HWIF(drive)->channel && drive->type != ATA_DISK) { diff -urN linux-2.5.6/drivers/ide/serverworks.c linux-2.5.6-timing/drivers/ide/serverworks.c --- linux-2.5.6/drivers/ide/serverworks.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/serverworks.c Tue Mar 12 16:26:03 2002 @@ -91,7 +91,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" #define DISPLAY_SVWKS_TIMINGS 1 #undef SVWKS_DEBUG_DRIVE_INFO @@ -263,7 +263,7 @@ byte pio_timing = 0x00; unsigned short csb5_pio = 0x00; - byte pio = ide_get_best_pio_mode(drive, 255, 5, NULL); + byte pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; switch (drive->dn) { case 0: drive_pci = 0x41; drive_pci2 = 0x45; break; @@ -364,9 +364,9 @@ unsigned short xfer_pio = drive->id->eide_pio_modes; byte timing, speed, pio; - pio = ide_get_best_pio_mode(drive, 255, 5, NULL); + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; - if (xfer_pio> 4) + if (xfer_pio > 4) xfer_pio = 0; if (drive->id->eide_pio_iordy > 0) @@ -417,29 +417,10 @@ byte udma_66 = eighty_ninty_three(drive); int ultra66 = (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ? 1 : 0; int ultra100 = (ultra66 && svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 1 : 0; - byte speed; - if ((id->dma_ultra & 0x0020) && (udma_66) && (ultra100)) { - speed = XFER_UDMA_5; - } else if (id->dma_ultra & 0x0010) { - speed = ((udma_66) && (ultra66)) ? XFER_UDMA_4 : XFER_UDMA_2; - } else if (id->dma_ultra & 0x0008) { - speed = ((udma_66) && (ultra66)) ? XFER_UDMA_3 : XFER_UDMA_1; - } else if (id->dma_ultra & 0x0004) { - speed = XFER_UDMA_2; - } else if (id->dma_ultra & 0x0002) { - speed = XFER_UDMA_1; - } else if (id->dma_ultra & 0x0001) { - speed = XFER_UDMA_0; - } else if (id->dma_mword & 0x0004) { - speed = XFER_MW_DMA_2; - } else if (id->dma_mword & 0x0002) { - speed = XFER_MW_DMA_1; - } else if (id->dma_1word & 0x0004) { - speed = XFER_SW_DMA_2; - } else { - speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); - } + byte speed = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | XFER_UDMA + | ((udma_66 && ultra66) ? XFER_UDMA_66 : 0) + | ((udma_66 && ultra100) ? XFER_UDMA_100 : 0)); (void) svwks_tune_chipset(drive, speed); diff -urN linux-2.5.6/drivers/ide/sis5513.c linux-2.5.6-timing/drivers/ide/sis5513.c --- linux-2.5.6/drivers/ide/sis5513.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/sis5513.c Tue Mar 12 16:26:03 2002 @@ -26,7 +26,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" #define DISPLAY_SIS_TIMINGS #define SIS5513_DEBUG_DRIVE_INFO 0 @@ -256,7 +256,9 @@ unsigned short xfer_pio = drive->id->eide_pio_modes; config_drive_art_rwp(drive); - pio = ide_get_best_pio_mode(drive, 255, pio, NULL); + + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; if (xfer_pio> 4) xfer_pio = 0; diff -urN linux-2.5.6/drivers/ide/sl82c105.c linux-2.5.6-timing/drivers/ide/sl82c105.c --- linux-2.5.6/drivers/ide/sl82c105.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/sl82c105.c Tue Mar 12 16:26:03 2002 @@ -22,7 +22,7 @@ #include #include -#include "ide_modes.h" +#include "ide-timing.h" extern char *ide_xfer_verbose (byte xfer_rate); @@ -31,13 +31,13 @@ * times for the interface. This has protection against run-away * timings. */ -static unsigned int get_timing_sl82c105(ide_pio_data_t *p) +static unsigned int get_timing_sl82c105(struct ide_timing *t) { unsigned int cmd_on; unsigned int cmd_off; - cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30; - cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30; + cmd_on = (t->active + 29) / 30; + cmd_off = (t->cycle - 30 * cmd_on + 29) / 30; if (cmd_on > 32) cmd_on = 32; @@ -49,7 +49,7 @@ if (cmd_off == 0) cmd_off = 1; - return (cmd_on - 1) << 8 | (cmd_off - 1) | (p->use_iordy ? 0x40 : 0x00); + return (cmd_on - 1) << 8 | (cmd_off - 1) | ((t->mode > XFER_PIO_2) ? 0x40 : 0x00); } /* @@ -59,25 +59,21 @@ { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - ide_pio_data_t p; + struct ide_timing *t; unsigned short drv_ctrl = 0x909; unsigned int xfer_mode, reg; reg = (hwif->channel ? 0x4c : 0x44) + (drive->select.b.unit ? 4 : 0); - pio = ide_get_best_pio_mode(drive, pio, 5, &p); + if (pio == 255) + xfer_mode = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); + else + xfer_mode = XFER_PIO_0 + min_t(byte, pio, 4); - switch (pio) { - default: - case 0: xfer_mode = XFER_PIO_0; break; - case 1: xfer_mode = XFER_PIO_1; break; - case 2: xfer_mode = XFER_PIO_2; break; - case 3: xfer_mode = XFER_PIO_3; break; - case 4: xfer_mode = XFER_PIO_4; break; - } + t = ide_timing_find_mode(xfer_mode); if (ide_config_drive_speed(drive, xfer_mode) == 0) - drv_ctrl = get_timing_sl82c105(&p); + drv_ctrl = get_timing_sl82c105(t); if (drive->using_dma == 0) { /* @@ -89,7 +85,7 @@ if (report) { printk("%s: selected %s (%dns) (%04X)\n", drive->name, - ide_xfer_verbose(xfer_mode), p.cycle_time, drv_ctrl); + ide_xfer_verbose(xfer_mode), t->cycle, drv_ctrl); } } } diff -urN linux-2.5.6/drivers/ide/slc90e66.c linux-2.5.6-timing/drivers/ide/slc90e66.c --- linux-2.5.6/drivers/ide/slc90e66.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.6-timing/drivers/ide/slc90e66.c Tue Mar 12 16:26:03 2002 @@ -48,7 +48,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" #define SLC90E66_DEBUG_DRIVE_INFO 0 @@ -202,7 +202,11 @@ { 2, 1 }, { 2, 3 }, }; - pio = ide_get_best_pio_mode(drive, pio, 5, NULL); + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; + else + pio = min_t(byte, pio, 4); + pci_read_config_word(HWIF(drive)->pci_dev, master_port, &master_data); if (is_slave) { master_data = master_data | 0x4000; @@ -299,30 +303,14 @@ #if 1 /* allow PIO modes */ if (!HWIF(drive)->autodma) { - speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); + speed = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO); (void) slc90e66_tune_chipset(drive, speed); return ((int) ide_dma_off_quietly); } #endif - if ((id->dma_ultra & 0x0010) && (ultra)) { - speed = (udma_66) ? XFER_UDMA_4 : XFER_UDMA_2; - } else if ((id->dma_ultra & 0x0008) && (ultra)) { - speed = (udma_66) ? XFER_UDMA_3 : XFER_UDMA_1; - } else if ((id->dma_ultra & 0x0004) && (ultra)) { - speed = XFER_UDMA_2; - } else if ((id->dma_ultra & 0x0002) && (ultra)) { - speed = XFER_UDMA_1; - } else if ((id->dma_ultra & 0x0001) && (ultra)) { - speed = XFER_UDMA_0; - } else if (id->dma_mword & 0x0004) { - speed = XFER_MW_DMA_2; - } else if (id->dma_mword & 0x0002) { - speed = XFER_MW_DMA_1; - } else if (id->dma_1word & 0x0004) { - speed = XFER_SW_DMA_2; - } else { - speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); - } + + speed = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA + | (ultra ? XFER_UDMA : 0) | ((ultra && udma_66) ? XFER_UDMA_66 : 0)); (void) slc90e66_tune_chipset(drive, speed); diff -urN linux-2.5.6/drivers/ide/umc8672.c linux-2.5.6-timing/drivers/ide/umc8672.c --- linux-2.5.6/drivers/ide/umc8672.c Wed Feb 20 03:10:59 2002 +++ linux-2.5.6-timing/drivers/ide/umc8672.c Tue Mar 12 16:26:03 2002 @@ -52,7 +52,7 @@ #include -#include "ide_modes.h" +#include "ide-timing.h" /* * Default speeds. These can be changed with "auto-tune" and/or hdparm. @@ -113,7 +113,11 @@ unsigned long flags; ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup; - pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + if (pio == 255) + pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; + else + pio = min_t(byte, pio, 4); + printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", drive->name, pio, pio_to_umc[pio]); save_flags(flags); /* all CPUs */ cli(); /* all CPUs */ diff -urN linux-2.5.6/drivers/ide/via82cxxx.c linux-2.5.6-timing/drivers/ide/via82cxxx.c --- linux-2.5.6/drivers/ide/via82cxxx.c Tue Mar 12 16:05:40 2002 +++ linux-2.5.6-timing/drivers/ide/via82cxxx.c Tue Mar 12 16:26:03 2002 @@ -352,7 +352,7 @@ return; } - via_set_drive(drive, XFER_PIO_0 + MIN(pio, 5)); + via_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5)); } #ifdef CONFIG_BLK_DEV_IDEDMA --n8g4imXOkfNTN/H1-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/