Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751289AbZGTNiK (ORCPT ); Mon, 20 Jul 2009 09:38:10 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751054AbZGTNiI (ORCPT ); Mon, 20 Jul 2009 09:38:08 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:59730 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751822AbZGTNiF (ORCPT ); Mon, 20 Jul 2009 09:38:05 -0400 From: balajitk@ti.com To: linux-kernel@vger.kernel.org Cc: tony@atomide.com, khilman@deeprootsystems.com, david-b@pacbell.net, linux-omap@vger.kernel.org, linux-i2c@vger.kernel.org, sameo@openedhand.com, wim@iguana.be, timo.t.kokkonen@nokia.com, ben-linux@fluff.org, lrg@slimlogic.co.uk, broonie@opensource.wolfsonmicro.com, Rajendra Nayak Subject: [RFC][PATCH 3/4] OMAP4: PMIC: Add support for twl6030 regulators Date: Mon, 20 Jul 2009 19:07:35 +0530 Message-Id: <1248097055-14736-1-git-send-email-balajitk@ti.com> X-Mailer: git-send-email 1.5.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11675 Lines: 350 From: Rajendra Nayak This patch updates the regulator driver to add support for TWL6030 PMIC specific LDO regulators. SMPS resources are not yet supported for TWL6030 and also .set_mode and .get_status for LDO's are yet to be implemented. Signed-off-by: Rajendra Nayak --- drivers/regulator/Kconfig | 4 +- drivers/regulator/Makefile | 2 +- drivers/regulator/twl-regulator.c | 106 +++++++++++++++++++++++++++++++------ include/linux/i2c/twl.h | 35 ++++++++++++ 4 files changed, 127 insertions(+), 20 deletions(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f431779..9e989a4 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -75,9 +75,9 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. -config REGULATOR_TWL4030 +config REGULATOR_TWL bool "TI TWL4030/TWL5030/TPS695x0 PMIC" - depends on TWL4030_CORE + depends on TWL4030_CORE || TWL6030_CORE help This driver supports the voltage regulators provided by this family of companion chips. diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 0653ce8..712f733 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o -obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o +obj-$(CONFIG_REGULATOR_TWL) += twl-regulator.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index d01aa4e..4152f2c 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -52,27 +52,38 @@ struct twlreg_info { * The first three registers of all power resource banks help hardware to * manage the various resource groups. */ +/* Common offset in TWL4030/6030 */ #define VREG_GRP 0 +/* TWL4030 register offsets */ #define VREG_TYPE 1 #define VREG_REMAP 2 -#define VREG_DEDICATED 3 /* LDO control */ - +#define VREG_DEDICATED 3 +/* TWL6030 register offsets */ +#define VREG_TRANS 1 +#define VREG_STATE 2 +#define VREG_VOLTAGE 3 +/* TWL6030 Misc register offsets */ +#define VREG_BC_ALL 1 +#define VREG_BC_REF 2 +#define VREG_BC_PROC 3 +#define VREG_BC_CLK_RST 4 static inline int -twlreg_read(struct twlreg_info *info, unsigned offset) +twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset) { u8 value; int status; - status = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, + status = twl_i2c_read_u8(slave_subgp, &value, info->base + offset); return (status < 0) ? status : value; } static inline int -twlreg_write(struct twlreg_info *info, unsigned offset, u8 value) +twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset, + u8 value) { - return twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, + return twl_i2c_write_u8(slave_subgp, value, info->base + offset); } @@ -82,17 +93,23 @@ twlreg_write(struct twlreg_info *info, unsigned offset, u8 value) static int twlreg_grp(struct regulator_dev *rdev) { - return twlreg_read(rdev_get_drvdata(rdev), VREG_GRP); + return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_SLAVE_LDO, + VREG_GRP); } /* * Enable/disable regulators by joining/leaving the P1 (processor) group. * We assume nobody else is updating the DEV_GRP registers. */ - +#ifdef CONFIG_TWL4030_CORE #define P3_GRP BIT(7) /* "peripherals" */ #define P2_GRP BIT(6) /* secondary processor, modem, etc */ #define P1_GRP BIT(5) /* CPU/Linux */ +#elif CONFIG_TWL6030_CORE +#define P3_GRP BIT(2) /* secondary processor, modem, etc */ +#define P2_GRP BIT(1) /* "peripherals" */ +#define P1_GRP BIT(0) /* CPU/Linux */ +#endif static int twlreg_is_enabled(struct regulator_dev *rdev) { @@ -109,12 +126,12 @@ static int twlreg_enable(struct regulator_dev *rdev) struct twlreg_info *info = rdev_get_drvdata(rdev); int grp; - grp = twlreg_read(info, VREG_GRP); + grp = twlreg_read(info, TWL_MODULE_PM_SLAVE_LDO, VREG_GRP); if (grp < 0) return grp; grp |= P1_GRP; - return twlreg_write(info, VREG_GRP, grp); + return twlreg_write(info, TWL_MODULE_PM_SLAVE_LDO, VREG_GRP, grp); } static int twlreg_disable(struct regulator_dev *rdev) @@ -122,12 +139,12 @@ static int twlreg_disable(struct regulator_dev *rdev) struct twlreg_info *info = rdev_get_drvdata(rdev); int grp; - grp = twlreg_read(info, VREG_GRP); + grp = twlreg_read(info, TWL_MODULE_PM_SLAVE_LDO, VREG_GRP); if (grp < 0) return grp; grp &= ~P1_GRP; - return twlreg_write(info, VREG_GRP, grp); + return twlreg_write(info, TWL_MODULE_PM_SLAVE_LDO, VREG_GRP, grp); } static int twlreg_get_status(struct regulator_dev *rdev) @@ -260,7 +277,29 @@ static const u16 VSIM_VSEL_table[] = { static const u16 VDAC_VSEL_table[] = { 1200, 1300, 1800, 1800, }; - +static const u16 VAUX1_6030_VSEL_table[] = { + 1000, 1300, 1800, 2500, + 2800, 2900, 3000, 3000, +}; +static const u16 VAUX2_6030_VSEL_table[] = { + 1200, 1800, 2500, 2750, + 2800, 2800, 2800, 2800, +}; +static const u16 VAUX3_6030_VSEL_table[] = { + 1000, 1200, 1300, 1800, + 2500, 2800, 3000, 3000, +}; +static const u16 VMMC_VSEL_table[] = { + 1200, 1800, 2800, 2900, + 3000, 3000, 3000, 3000, +}; +static const u16 VPP_VSEL_table[] = { + 1800, 1900, 2000, 2100, + 2200, 2300, 2400, 2500, +}; +static const u16 VUSIM_VSEL_table[] = { + 1200, 1800, 2500, 2900, +}; static int twlldo_list_voltage(struct regulator_dev *rdev, unsigned index) { @@ -288,7 +327,8 @@ twlldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) /* use the first in-range value */ if (min_uV <= uV && uV <= max_uV) - return twlreg_write(info, VREG_DEDICATED, vsel); + return twlreg_write(info, TWL_MODULE_PM_SLAVE_LDO, + VREG_VOLTAGE, vsel); } return -EDOM; @@ -297,7 +337,8 @@ twlldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) static int twlldo_get_voltage(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); - int vsel = twlreg_read(info, VREG_DEDICATED); + int vsel = twlreg_read(info, TWL_MODULE_PM_SLAVE_LDO, + VREG_VOLTAGE); if (vsel < 0) return vsel; @@ -316,9 +357,10 @@ static struct regulator_ops twlldo_ops = { .disable = twlreg_disable, .is_enabled = twlreg_is_enabled, +#ifdef CONFIG_TWL4030_CORE .set_mode = twlreg_set_mode, - .get_status = twlreg_get_status, +#endif }; /*----------------------------------------------------------------------*/ @@ -349,9 +391,10 @@ static struct regulator_ops twlfixed_ops = { .disable = twlreg_disable, .is_enabled = twlreg_is_enabled, +#ifdef CONFIG_TWL4030_CORE .set_mode = twlreg_set_mode, - .get_status = twlreg_get_status, +#endif }; /*----------------------------------------------------------------------*/ @@ -360,6 +403,10 @@ static struct regulator_ops twlfixed_ops = { TWL_ADJUSTABLE_LDO(label, offset, num, TWL4030) #define TWL4030_FIXED_LDO(label, offset, mVolts, num) \ TWL_FIXED_LDO(label, offset, mVolts, num, TWL4030) +#define TWL6030_ADJUSTABLE_LDO(label, offset, num) \ + TWL_ADJUSTABLE_LDO(label, offset, num, TWL6030) +#define TWL6030_FIXED_LDO(label, offset, mVolts, num) \ + TWL_FIXED_LDO(label, offset, mVolts, num, TWL6030) #define TWL_ADJUSTABLE_LDO(label, offset, num, family) { \ .base = offset, \ @@ -395,6 +442,7 @@ static struct regulator_ops twlfixed_ops = { * software control over them after boot. */ static struct twlreg_info twl_regs[] = { +#ifdef CONFIG_TWL4030_CORE TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1), TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2), TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2), @@ -420,6 +468,30 @@ static struct twlreg_info twl_regs[] = { TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18), TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19), /* VUSBCP is managed *only* by the USB subchip */ +#elif CONFIG_TWL6030_CORE + TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x84, 1), + TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x88, 2), + TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x8c, 3), + TWL6030_ADJUSTABLE_LDO(VMMC, 0x98, 4), + TWL6030_ADJUSTABLE_LDO(VPP, 0x9c, 5), + /* + TWL6030_ADJUSTABLE_LDO(VRTC, 0x00, 6), + */ + TWL6030_ADJUSTABLE_LDO(VUSIM, 0xa4, 7), + /* SMPS + TWL6030_SMPS(VDD1, 0x4b, 8), + TWL6030_SMPS(VDD2, 0x55, 9), + TWL6030_SMPS(VDD3, 0x63, 10), + TWL6030_SMPS(VMEM, 0x00, 11), + TWL6030_SMPS(V1V29, 0x00, 12), + TWL6030_SMPS(V1V8, 0x00, 13), + TWL6030_SMPS(V2V1, 0x00, 14), + */ + TWL6030_FIXED_LDO(VANA, 0x80, 2100, 15), + TWL6030_FIXED_LDO(VCXIO, 0x90, 1800, 16), + TWL6030_FIXED_LDO(VDAC, 0x94, 1800, 17), + TWL6030_FIXED_LDO(VUSB, 0xa0, 3300, 18) +#endif }; static int twlreg_probe(struct platform_device *pdev) diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 5ec9070..b128831 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -87,6 +87,7 @@ #define TWL_MODULE_INT TWL4030_MODULE_INT #define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER #define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER +#define TWL_MODULE_PM_SLAVE_LDO TWL_MODULE_PM_RECEIVER #define TWL_MODULE_RTC TWL4030_MODULE_RTC #define TWL_MODULE_SECURED_REG TWL4030_MODULE_SECURED_REG @@ -406,6 +407,12 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); #define MSG_SINGULAR(devgrp, id, state) \ ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) +#define MSG_BROADCAST_ALL(devgrp, state) \ + ((devgrp) << 5 | (state)) + +#define MSG_BROADCAST_REF MSG_BROADCAST_ALL +#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL +#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL /*----------------------------------------------------------------------*/ struct twl_bci_platform_data { @@ -516,6 +523,7 @@ int twl4030_sih_setup(int module); * VIO is generally fixed. */ +/* TWL4030 SMPS/LDO's */ /* EXTERNAL dc-to-dc buck converters */ #define TWL4030_REG_VDD1 0 #define TWL4030_REG_VDD2 1 @@ -542,6 +550,33 @@ int twl4030_sih_setup(int module); #define TWL4030_REG_VUSB1V8 18 #define TWL4030_REG_VUSB3V1 19 +/* TWL6030 SMPS/LDO's */ +/* EXTERNAL dc-to-dc buck convertor contollable via SR */ +#define TWL6030_REG_VDD1 0 +#define TWL6030_REG_VDD2 1 +#define TWL6030_REG_VDD3 2 + +/* Non SR compliant dc-to-dc buck convertors */ +#define TWL6030_REG_VMEM 3 +#define TWL6030_REG_V2V1 4 +#define TWL6030_REG_V1V29 5 +#define TWL6030_REG_V1V8 6 + +/* EXTERNAL LDOs */ +#define TWL6030_REG_VAUX1_6030 7 +#define TWL6030_REG_VAUX2_6030 8 +#define TWL6030_REG_VAUX3_6030 9 +#define TWL6030_REG_VMMC 10 +#define TWL6030_REG_VPP 11 +#define TWL6030_REG_VUSIM 12 +#define TWL6030_REG_VANA 13 +#define TWL6030_REG_VCXIO 14 +#define TWL6030_REG_VDAC 15 +#define TWL6030_REG_VUSB 16 + +/* INTERNAL LDOs */ +#define TWL6030_REG_VRTC 17 + int twl_int_mask_reset(u8 bit_mask, u8 offset); int twl_int_mask_set(u8 bit_mask, u8 offset); int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); -- 1.5.4.7 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/