Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 4 Dec 2000 14:24:46 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 4 Dec 2000 14:24:37 -0500 Received: from zmamail05.zma.compaq.com ([161.114.64.105]:22281 "HELO zmamail05.zma.compaq.com") by vger.kernel.org with SMTP id ; Mon, 4 Dec 2000 14:24:18 -0500 Date: Mon, 4 Dec 2000 13:53:42 -0500 (EST) From: Phillip Ezolt Reply-To: Phillip Ezolt To: Ivan Kokshaysky Cc: Andrea Arcangeli , rth@twiddle.net, Jay.Estabrook@compaq.com, linux-kernel@vger.kernel.org, wcarr@perf.zko.dec.com Subject: Re: Alpha SCSI error on 2.4.0-test11 In-Reply-To: <20001202011104.A2089@jurassic.park.msu.ru> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Ivan, I've recompiled as you have suggested. Any ideas? Here is my dmesg output: Linux version 2.4.0-test12 (ezolt@pulitzer.zko.dec.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #3 Mon Dec 4 02:38:18 EST 2000 Booting GENERIC on Miata using machine vector Miata from SRM Command line: console=tty0 console=ttyS0,9600 root=/dev/fd0 memcluster 0, usage 1, start 0, end 236 memcluster 1, usage 0, start 236, end 147455 memcluster 2, usage 1, start 147455, end 147456 freeing pages 236:384 freeing pages 754:147455 pci: cia revision 1 (pyxis) On node 0 totalpages: 147456 zone(0): 147456 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=tty0 console=ttyS0,9600 root=/dev/fd0 Using epoch = 1952 Console: colour VGA+ 80x25 Calibrating delay loop... 1191.18 BogoMIPS Memory: 1155136k/1179640k available (1602k kernel code, 22616k reserved, 515k data, 376k init) Dentry-cache hash table entries: 262144 (order: 9, 4194304 bytes) Buffer-cache hash table entries: 65536 (order: 6, 524288 bytes) Page-cache hash table entries: 262144 (order: 8, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 2097152 bytes) POSIX conformance testing by UNIFIX pci: passed tb register update test pci: passed sg loopback i/o read test pci: passed tbia test pci: passed pte write cache snoop test pci: failed valid tag invalid pte reload test (mcheck; workaround available) pci: passed pci machine check test got res[8000:807f] for resource 0 of Digital Equipment Corporation DECchip 21142/43 got res[8080:80ff] for resource 1 of Digital Equipment Corporation DEFPA got res[8400:840f] for resource 4 of Contaq Microsystems 82c693 (#2) got res[9000000:97fffff] for resource 1 of Matrox Graphics, Inc. MGA 2064W [Millennium] got res[9800000:983ffff] for resource 6 of Digital Equipment Corporation DECchip 21142/43 got res[9840000:984ffff] for resource 4 of Contaq Microsystems 82c693 (#3) got res[9850000:985ffff] for resource 6 of Matrox Graphics, Inc. MGA 2064W [Millennium] got res[9860000:986ffff] for resource 2 of Digital Equipment Corporation DEFPA got res[9870000:9873fff] for resource 0 of Matrox Graphics, Inc. MGA 2064W [Millennium] got res[9874000:9874fff] for resource 0 of Contaq Microsystems 82c693 (#4) got res[9875000:987507f] for resource 1 of Digital Equipment Corporation DECchip 21142/43 got res[9876000:987607f] for resource 0 of Digital Equipment Corporation DEFPA got res[9000:90ff] for resource 0 of Q Logic ISP1020 got res[9400:947f] for resource 0 of Digital Equipment Corporation DECchip 21040 [Tulip] got res[9900000:990ffff] for resource 6 of Q Logic ISP1020 got res[9910000:9910fff] for resource 1 of Q Logic ISP1020 got res[9911000:991107f] for resource 1 of Digital Equipment Corporation DECchip 21040 [Tulip] PCI: Bus 1, bridge: Digital Equipment Corporation DECchip 21152 IO window: 9000-9fff MEM window: 09900000-099fffff PCI enable device: (Digital Equipment Corporation DECchip 21142/43) cmd reg 0x47 PCI enable device: (Contaq Microsystems 82c693) cmd reg 0x47 PCI enable device: (Contaq Microsystems 82c693 (#2)) cmd reg 0x45 PCI enable device: (Contaq Microsystems 82c693 (#3)) cmd reg 0x47 PCI enable device: (Contaq Microsystems 82c693 (#4)) cmd reg 0x46 PCI enable device: (Matrox Graphics, Inc. MGA 2064W [Millennium]) cmd reg 0x87 PCI enable device: (Digital Equipment Corporation DEFPA) cmd reg 0x47 PCI enable device: (Digital Equipment Corporation DECchip 21152) cmd reg 0x107 PCI enable device: (Q Logic ISP1020) cmd reg 0x47 PCI enable device: (Digital Equipment Corporation DECchip 21040 [Tulip]) cmd reg 0x47 SMC37c669 Super I/O Controller found @ 0x370 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 pty: 256 Unix98 ptys configured Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx CY82C693: IDE controller on PCI bus 00 dev 39 CY82C693: chipset revision 0 CY82C693: not 100% native mode: will probe irqs later CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net) ide0: BM-DMA at 0x8400-0x8407<7>pci_map_single: [fffffc0001910000,1000] -> direct 41910000 from fffffc000031afa8 , BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x8408-0x840f<7>pci_map_single: [fffffc00001fa000,1000] -> direct 401fa000 from fffffc000031afa8 , BIOS settings: hdc:pio, hdd:pio hda: TOSHIBA CD-ROM XM-5702B, ATAPI CDROM drive ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 12X CD-ROM drive, 256kB Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 2.88M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A rtc: Digital UNIX epoch (1952) detected Real Time Clock Driver v1.10d Linux Tulip driver version 0.9.11 (November 3, 2000) eth0: Digital DS21143 Tulip rev 48 at 0x8000, 00:00:F8:76:72:DA, IRQ 24. eth0: EEPROM default media type Autosense. eth0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. eth0: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) block. eth0: Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block. eth0: Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block. eth0: Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block. eth0: MII transceiver #5 config 2000 status 784b advertising 01e1. eth1: Digital DC21040 Tulip rev 35 at 0x9400, 08:00:2B:E4:1E:CB, IRQ 44. SCSI subsystem driver Revision: 1.00 qlogicisp : new isp1020 revision ID (5) scsi0 : QLogic ISP1020 SCSI on PCI bus 01 device 20 irq 27 I/O base 0x9000 CIA machine check: vector=0x660 pc=0xfffffc0000310764 code=0x813 machine check type: unknown pc = [] ra = [] ps = 0000 v0 = 0000000047fe03b8 t0 = fffffc0000310a10 t1 = 0000000000000001 t2 = 0000000000000001 t3 = fffffc0001914000 t4 = fffffc0000562208 t5 = 0000000000000057 t6 = fffffc0000560d88 t7 = fffffc0001914000 a0 = 00000000019143b8 a1 = fffffc0047fe0000 a2 = fffffc000032e304 a3 = fffffffffffffffe a4 = 000000000000000f a5 = 0000000000000000 t8 = 0000000000000000 t9 = 0000000063001812 t10= 0000000000000000 t11= 0000000000000010 pv = fffffc0000310a00 at = fffffc000052c080 gp = fffffc0000585890 sp = fffffc0001917c00 --Phil Compaq: High Performance Server Division/Benchmark Performance Engineering ---------------- Alpha, The Fastest Processor on Earth -------------------- Phillip.Ezolt@compaq.com |C|O|M|P|A|Q| ezolt@perf.zko.dec.com ------------------- See the results at www.spec.org ----------------------- On Sat, 2 Dec 2000, Ivan Kokshaysky wrote: > On Fri, Dec 01, 2000 at 02:56:43PM -0500, Phillip Ezolt wrote: > > What data structure's would I look at? What should I investigate to > > verify this? > > In the arch/alpha/kernel/pci_iommu.c change > #define DEBUG_ALLOC 0 > to > #define DEBUG_ALLOC 2 > > Perhaps this will give us more info. > At the first look window 1 is being set up properly. > > Ivan. > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/