Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752537AbZGUHtb (ORCPT ); Tue, 21 Jul 2009 03:49:31 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751945AbZGUHt3 (ORCPT ); Tue, 21 Jul 2009 03:49:29 -0400 Received: from mail.windriver.com ([147.11.1.11]:60279 "EHLO mail.wrs.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751537AbZGUHt2 (ORCPT ); Tue, 21 Jul 2009 03:49:28 -0400 Message-ID: <4A657296.4050002@windriver.com> Date: Tue, 21 Jul 2009 02:47:34 -0500 From: Jason Wessel User-Agent: Thunderbird 2.0.0.22 (X11/20090608) MIME-Version: 1.0 To: Alan Stern CC: gregkh@suse.de, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, dbrownell@users.sourceforge.net, Ingo Molnar , Andrew Morton , Yinghai Lu , "Eric W. Biederman" Subject: Re: [PATCH 07/10] ehci-dbgp,ehci: Allow early or late use of the dbgp device References: <4A64E3BA.1020009@windriver.com> In-Reply-To: <4A64E3BA.1020009@windriver.com> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 21 Jul 2009 07:47:16.0704 (UTC) FILETIME=[77DC8600:01CA09D7] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6317 Lines: 210 Alan Stern wrote: > On Mon, 20 Jul 2009, Jason Wessel wrote: >> + /* optional debug port, normally in the first BAR */ >> + temp = pci_find_capability(pdev, 0x0a); > This isn't going to work very well on systems with non-PCI EHCI > controllers. Maybe you should leave debug-port detection in > ehci-pci.c. The controller doesn't get reset very much in any case. > The high level debug port detection still needed to move, but you are correct, it needs to move with in the ehci-pci.c. The ehci_reset() definitely clears the debug controller in the pci probe call to ehci_pci_setup(). The debug port detect code just needs to get called before the ehci_reset() in this case. The repaired patch is inline below. Thanks, Jason. --- From: Jason Wessel Subject: [PATCH] ehci-dbgp,ehci: Allow early or late use of the dbgp device If the EHCI debug port is initialized and in use, the EHCI host controller driver must follow two rules. 1) If the EHCI host driver issues a controller reset, the debug controller driver re-initialization must get called after the reset is completed. 2) The EHCI host driver should ignore any requests to the physical EHCI debug port when the EHCI debug port is in use. The code to check for the debug port was moved from ehci_pci_reinit() to ehci_pci_setup because it must get called prior to ehci_reset() which will clear the debug port registers. Signed-off-by: Jason Wessel --- drivers/usb/early/ehci-dbgp.c | 23 +++++++++++++++++++++++ drivers/usb/host/ehci-hcd.c | 8 ++++++++ drivers/usb/host/ehci-hub.c | 10 ++++++++++ drivers/usb/host/ehci-pci.c | 39 +++++++++++++++++++-------------------- include/linux/usb/ehci_def.h | 10 ++++++++++ 5 files changed, 70 insertions(+), 20 deletions(-) --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -239,6 +239,11 @@ static int ehci_reset (struct ehci_hcd * int retval; u32 command = ehci_readl(ehci, &ehci->regs->command); + /* If the EHCI debug controller is active, special care must be + * taken before and after a host controller reset */ + if (ehci->debug && !dbgp_reset_prep()) + ehci->debug = NULL; + command |= CMD_RESET; dbg_cmd (ehci, "reset", command); ehci_writel(ehci, command, &ehci->regs->command); @@ -253,6 +258,9 @@ static int ehci_reset (struct ehci_hcd * if (ehci_is_TDI(ehci)) tdi_reset (ehci); + if (ehci->debug) + dbgp_external_startup(); + return retval; } --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -816,6 +816,15 @@ static int ehci_hub_control ( case SetPortFeature: selector = wIndex >> 8; wIndex &= 0xff; + if (unlikely(ehci->debug)) { + /* If the debug port is active any port + * feature requests should get denied */ + if ((readl(&ehci->debug->control) & DBGP_ENABLED) && + wIndex == HCS_DEBUG_PORT(ehci->hcs_params)) { + retval = -ENODEV; + goto error_exit; + } + } if (!wIndex || wIndex > ports) goto error; wIndex--; @@ -894,6 +903,7 @@ error: /* "stall" on error */ retval = -EPIPE; } +error_exit: spin_unlock_irqrestore (&ehci->lock, flags); return retval; } --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -27,28 +27,8 @@ /* called after powerup, by probe or system-pm "wakeup" */ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) { - u32 temp; int retval; - /* optional debug port, normally in the first BAR */ - temp = pci_find_capability(pdev, 0x0a); - if (temp) { - pci_read_config_dword(pdev, temp, &temp); - temp >>= 16; - if ((temp & (3 << 13)) == (1 << 13)) { - temp &= 0x1fff; - ehci->debug = ehci_to_hcd(ehci)->regs + temp; - temp = ehci_readl(ehci, &ehci->debug->control); - ehci_info(ehci, "debug port %d%s\n", - HCS_DEBUG_PORT(ehci->hcs_params), - (temp & DBGP_ENABLED) - ? " IN USE" - : ""); - if (!(temp & DBGP_ENABLED)) - ehci->debug = NULL; - } - } - /* we expect static quirk code to handle the "extended capabilities" * (currently just BIOS handoff) allowed starting with EHCI 0.96 */ @@ -192,6 +172,25 @@ static int ehci_pci_setup(struct usb_hcd break; } + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability(pdev, 0x0a); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if ((temp & (3 << 13)) == (1 << 13)) { + temp &= 0x1fff; + ehci->debug = ehci_to_hcd(ehci)->regs + temp; + temp = ehci_readl(ehci, &ehci->debug->control); + ehci_info(ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(ehci->hcs_params), + (temp & DBGP_ENABLED) + ? " IN USE" + : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; + } + } + ehci_reset(ehci); /* at least the Genesys GL880S needs fixup here */ --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -971,3 +971,26 @@ struct console early_dbgp_console = { .flags = CON_PRINTBUFFER, .index = -1, }; + +int dbgp_reset_prep(void) +{ + u32 ctrl; + + dbgp_not_safe = 1; + if (!ehci_debug) + return 0; + + if (early_dbgp_console.index != -1 && + !(early_dbgp_console.flags & CON_BOOT)) + return 1; + /* This means the console is not initialized, or should get + * shutdown so as to allow for reuse of the usb device, which + * means it is time to shutdown the usb debug port. */ + ctrl = readl(&ehci_debug->control); + if (ctrl & DBGP_ENABLED) { + ctrl &= ~(DBGP_CLAIM); + writel(ctrl, &ehci_debug->control); + } + return 0; +} +EXPORT_SYMBOL_GPL(dbgp_reset_prep); --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -167,6 +167,16 @@ extern struct console early_dbgp_console #ifdef CONFIG_EARLY_PRINTK_DBGP /* Call backs from ehci host driver to ehci debug driver */ extern int dbgp_external_startup(void); +extern int dbgp_reset_prep(void); +#else +static inline int dbgp_reset_prep(void) +{ + return 1; +} +static inline int dbgp_external_startup(void) +{ + return -1; +} #endif #endif /* __LINUX_USB_EHCI_DEF_H */ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/