Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 4 Dec 2000 16:46:57 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 4 Dec 2000 16:46:48 -0500 Received: from dial249.pm3abing3.abingdonpm.naxs.com ([216.98.75.249]:16389 "EHLO ani.animx.eu.org") by vger.kernel.org with ESMTP id ; Mon, 4 Dec 2000 16:46:42 -0500 Date: Mon, 4 Dec 2000 16:26:42 -0500 From: Wakko Warner To: linux-alpha@vger.kernel.org, linux-kernel@vger.kernel.org Subject: 2.4.0-test12-pre4 boot failure (better than pre3 and lower) Message-ID: <20001204162642.A5553@animx.eu.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="n8g4imXOkfNTN/H1" X-Mailer: Mutt 0.95.3i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --n8g4imXOkfNTN/H1 Content-Type: text/plain; charset=us-ascii PCI patches that were added between pre3 and pre4 allow me to boot the kernel on my noritake alpha. Once it boots, however, it oops's in the swapper. I've tried a few times in the past to use ksymoops on oops's on the alpha arch, but it doesn't appear to work. (I'm using the ksymoops that's part of the debian potato dist) I have attached the boot log. Keep my name in the CC -- Lab tests show that use of micro$oft causes cancer in lab animals --n8g4imXOkfNTN/H1 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=240t12p4-boot Linux version 2.4.0-test12-pre4 (wakko@kakarot) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #2 Mon Dec 4 09:07:20 EST 2000 Booting on Noritake using machine vector Noritake from SRM Command line: root=/dev/sda1 ro single console=ttyS0 memcluster 0, usage 1, start 0, end 171 memcluster 1, usage 0, start 171, end 20403 memcluster 2, usage 1, start 20403, end 20480 freeing pages 171:384 freeing pages 625:20403 On node 0 totalpages: 20480 zone(0): 20480 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/sda1 ro single console=ttyS0 Using epoch = 1900 Console: colour VGA+ 80x25 Calibrating delay loop... 525.34 BogoMIPS Memory: 157168k/163224k available (1114k kernel code, 4688k reserved, 241k data, 208k init) Dentry-cache hash table entries: 32768 (order: 6, 524288 bytes) Buffer-cache hash table entries: 8192 (order: 3, 65536 bytes) Page-cache hash table entries: 32768 (order: 5, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 262144 bytes) POSIX conformance testing by UNIFIX got res[2800000:2ffffff] for resource 1 of 3DLabs Permedia II 2D+3D got res[3000000:37fffff] for resource 2 of 3DLabs Permedia II 2D+3D got res[2200000:221ffff] for resource 0 of 3DLabs Permedia II 2D+3D got res[2220000:222ffff] for resource 6 of 3DLabs Permedia II 2D+3D got res[9000:90ff] for resource 0 of Q Logic ISP1020 got res[9400:947f] for resource 0 of Digital Equipment Corporation DECchip 21142/43 got res[9480:94bf] for resource 0 of 3Com Corporation 3c905 100BaseTX [Boomerang] got res[3800000:383ffff] for resource 6 of Digital Equipment Corporation DECchip 21142/43 got res[3840000:384ffff] for resource 6 of Q Logic ISP1020 got res[3850000:385ffff] for resource 6 of 3Com Corporation 3c905 100BaseTX [Boomerang] got res[3860000:3860fff] for resource 1 of Q Logic ISP1020 got res[3861000:386107f] for resource 1 of Digital Equipment Corporation DECchip 21142/43 PCI: Bus 1, bridge: Digital Equipment Corporation DECchip 21050 IO window: 1000-9fff MEM window: 03800000-038fffff PCI enable device: (Intel Corporation 82375EB) cmd reg 0x7 PCI enable device: (Digital Equipment Corporation DECchip 21050) cmd reg 0x107 PCI enable device: (3DLabs Permedia II 2D+3D) cmd reg 0x7 PCI enable device: (Q Logic ISP1020) cmd reg 0x47 PCI enable device: (Digital Equipment Corporation DECchip 21142/43) cmd reg 0x47 PCI enable device: (3Com Corporation 3c905 100BaseTX [Boomerang]) cmd reg 0x47 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 pty: 256 Unix98 ptys configured Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ttyS03 at 0x02e8 (irq = 3) is a 16550A SCSI subsystem driver Revision: 1.00 qlogicisp : new isp1020 revision ID (2) scsi0 : QLogic ISP1020 SCSI on PCI bus 01 device 00 irq 17 I/O base 0x9000 Vendor: WDIGTL Model: ENTERPRISE Rev: 1.80 Type: Direct-Access ANSI SCSI revision: 02 Vendor: DEC Model: RZ28D (C) DEC Rev: 0010 Type: Direct-Access ANSI SCSI revision: 02 Vendor: DEC Model: RZ28D (C) DEC Rev: 0008 Type: Direct-Access ANSI SCSI revision: 02 Vendor: DEC Model: RZ28D (C) DEC Rev: 0008 Type: Direct-Access ANSI SCSI revision: 02 Vendor: ARCHIVE Model: Python 25501-XXX Rev: 2.54 Type: Sequential-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0 Detected scsi disk sdd at scsi0, channel 0, id 3, lun 0 SCSI device sda: 4254819 512-byte hdwr sectors (2178 MB) Partition check: sda: sda1 sda2 sda3 sda4 sda5 SCSI device sdb: 4110480 512-byte hdwr sectors (2105 MB) sdb: unknown partition table SCSI device sdc: 4110480 512-byte hdwr sectors (2105 MB) sdc: unknown partition table SCSI device sdd: 4110480 512-byte hdwr sectors (2105 MB) sdd: unknown partition table NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 208k freed Unable to handle kernel paging request at virtual address 0000000000000010 swapper(53): Oops 0 pc = [] ra = [] ps = 0000 v0 = 0000000000000000 t0 = 0000000000000012 t1 = fffffc0000485748 t2 = fffffc0009f5c560 t3 = fffffc000046cfb0 t4 = 0000000000000000 t5 = fffffffffffffffe t6 = ffffffffffffffff t7 = fffffc0009e00000 s0 = fffffc0000323600 s1 = 0000000000000000 s2 = fffffc0009f5c560 s3 = fffffc0009f5c560 s4 = fffffc0009eb0ac0 s5 = fffffc0009eb0ac0 s6 = fffffc0009eb0ac0 a0 = fffffc00004870c8 a1 = fffffc0009e00050 a2 = fffffc00004871c8 a3 = 0000000000000000 a4 = 0000000000000001 a5 = 0000000000000000 t8 = 0000000000000001 t9 = 0000000000000003 t10= 0000000000000004 t11= 0000000000000010 pv = fffffc0000323600 at = 0000000000000000 gp = fffffc00004a3f58 sp = fffffc0009dffee0 Code: 40203001 addl t0,1,t0 b82b0000 stl_c t0,0(s2) e42001fe blt t0,.+2044 b57e0148 stq s2,328(sp) a5480428 ldq s1,1064(t7) a0220008 ldl t0,8(t1) *a60a0010 ldq a0,16(s1) a52a0028 ldq s0,40(s1) Trace:323658 323600 Unable to handle kernel paging request at virtual address 0000000000000010 swapper(54): Oops 0 pc = [] ra = [] ps = 0000 v0 = 0000000000000000 t0 = 0000000000000012 t1 = fffffc0000485748 t2 = fffffc0009f5c560 t3 = fffffc000046cfb0 t4 = 0000000000000000 t5 = fffffffffffffffe t6 = ffffffffffffffff t7 = fffffc0009e00000 s0 = fffffc0000323600 s1 = 0000000000000000 s2 = fffffc0009f5c560 s3 = fffffc0009f5c560 s4 = fffffc0009eb0ac0 s5 = fffffc0009eb0ac0 s6 = fffffc0009eb0ac0 a0 = fffffc00004870c8 a1 = fffffc0009e00050 a2 = fffffc00004871c8 a3 = 0000000000000000 a4 = 0000000000000001 a5 = 0000000000000000 t8 = 0000000000000001 t9 = 0000000000000003 t10= 0000000000000004 t11= 0000000000000010 pv = fffffc0000323600 at = 0000000000000000 gp = fffffc00004a3f58 sp = fffffc0009dffee0 Code: 40203001 addl t0,1,t0 b82b0000 stl_c t0,0(s2) e42001fe blt t0,.+2044 b57e0148 stq s2,328(sp) a5480428 ldq s1,1064(t7) a0220008 ldl t0,8(t1) *a60a0010 ldq a0,16(s1) a52a0028 ldq s0,40(s1) Trace:323658 323600 Unable to handle kernel paging request at virtual address 0000000000000010 swapper(56): Oops 0 pc = [] ra = [] ps = 0000 v0 = 0000000000000000 t0 = 0000000000000012 t1 = fffffc0000485748 t2 = fffffc0009f5c560 t3 = fffffc000046cfb0 t4 = 0000000000000000 t5 = fffffffffffffffe t6 = ffffffffffffffff t7 = fffffc0009e00000 s0 = fffffc0000323600 s1 = 0000000000000000 s2 = fffffc0009f5c560 s3 = fffffc0009f5c560 s4 = fffffc0009eb0ac0 s5 = fffffc0009eb0ac0 s6 = fffffc0009eb0ac0 a0 = fffffc00004870c8 a1 = fffffc0009e00050 a2 = fffffc00004871c8 a3 = 0000000000000000 a4 = 0000000000000001 a5 = 0000000000000000 t8 = 0000000000000001 t9 = 0000000000000003 t10= 0000000000000004 t11= 0000000000000010 pv = fffffc0000323600 at = 0000000000000000 gp = fffffc00004a3f58 sp = fffffc0009dffee0 Code: 40203001 addl t0,1,t0 b82b0000 stl_c t0,0(s2) e42001fe blt t0,.+2044 b57e0148 stq s2,328(sp) a5480428 ldq s1,1064(t7) a0220008 ldl t0,8(t1) *a60a0010 ldq a0,16(s1) a52a0028 ldq s0,40(s1) Trace:323658 323600 Unable to handle kernel paging request at virtual address 0000000000000010 swapper(57): Oops 0 pc = [] ra = [] ps = 0000 v0 = 0000000000000000 t0 = 0000000000000012 t1 = fffffc0000485748 t2 = fffffc0009f5c560 t3 = fffffc000046cfb0 t4 = 0000000000000000 t5 = fffffffffffffffe t6 = ffffffffffffffff t7 = fffffc0009e00000 s0 = fffffc0000323600 s1 = 0000000000000000 s2 = fffffc0009f5c560 s3 = fffffc0009f5c560 s4 = fffffc0009eb0ac0 s5 = fffffc0009eb0ac0 s6 = fffffc0009eb0ac0 a0 = fffffc00004870c8 a1 = fffffc0009e00050 a2 = fffffc00004871c8 a3 = 0000000000000000 a4 = 0000000000000001 a5 = 0000000000000000 t8 = 0000000000000001 t9 = 0000000000000003 t10= 0000000000000004 t11= 0000000000000010 pv = fffffc0000323600 at = 0000000000000000 gp = fffffc00004a3f58 sp = fffffc0009dffee0 Code: 40203001 addl t0,1,t0 b82b0000 stl_c t0,0(s2) e42001fe blt t0,.+2044 b57e0148 stq s2,328(sp) a5480428 ldq s1,1064(t7) a0220008 ldl t0,8(t1) *a60a0010 ldq a0,16(s1) a52a0028 ldq s0,40(s1) Trace:323658 323600 --n8g4imXOkfNTN/H1-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/