Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754070AbZGWMvP (ORCPT ); Thu, 23 Jul 2009 08:51:15 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751607AbZGWMvO (ORCPT ); Thu, 23 Jul 2009 08:51:14 -0400 Received: from g1t0026.austin.hp.com ([15.216.28.33]:25100 "EHLO g1t0026.austin.hp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751478AbZGWMvM (ORCPT ); Thu, 23 Jul 2009 08:51:12 -0400 Subject: Re: Boot Hang - mmotm 090716 - serial 8250 irq flags support From: Lee Schermerhorn To: Alan Cox Cc: Andrew Morton , Vikram Pandita , Alan Cox , linux-kernel , Bjorn Helgaas , Eric Whitney , Rich Freiss In-Reply-To: <20090723113353.7da8f6f9@lxorguk.ukuu.org.uk> References: <1248291948.4490.67.camel@useless.americas.hpqcorp.net> <20090723113353.7da8f6f9@lxorguk.ukuu.org.uk> Content-Type: text/plain; charset="UTF-8" Organization: HP/LKTT Date: Thu, 23 Jul 2009 08:51:02 -0400 Message-Id: <1248353462.5674.80.camel@useless.americas.hpqcorp.net> Mime-Version: 1.0 X-Mailer: Evolution 2.26.1 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 42257 Lines: 954 On Thu, 2009-07-23 at 11:33 +0100, Alan Cox wrote: > On Wed, 22 Jul 2009 15:45:48 -0400 > Lee Schermerhorn wrote: > > > The mmotm dated 17jul09 atop 2.6.31-rc3 hangs [or appears to--could have > > just lost remote access via virtual serial port] during boot on HP > > Proliant DL585 [and perhaps others]. Checking back, the last mmotm to > > boot successfully on this platform was the 25jun09 snapshot. > > Is your virtual serial port the console ? Also when you say "lost remote > access", at what point do you lose remote access - what is the last thing > printed to the console. What if anything is logged on the monitor if one > is plugged in and does it boot fine with the patch but without console > on the serial port ? Alan: Yes, the vsp is the console. The test machine is in a lab 40 miles or so away. I access the "management processor" ["ilo" or "integrated lights out" console in HP market-speak] via the net and then connect to the virtual serial port from there. Like a network terminal server. This shows up as ttyS1 in Linux. I plan on driving down to the site next week and plugging a terminal into a serial port to test a "real serial port". I'll attach the console output--what I can capture of it--below. [Ouch! I rebooted kernel with the 8250 patch to capture console log. Altho' console hangs, looks like it still booted. More below.] > > Is the virtual serial port a standard PC serial port (or appearing as > one) and using the standard drivers or is there anything else > loaded/special modules in use for it ? As far as I know, it LOOKS like a standard pc serial port. I don't know the actual hardware, altho' it seems to use the 8250 driver. Here's what I see when I attach to the vsp from the ilo command line: hpiLO-> Virtual Serial Port active: IO=0x02F8 INT=3 Perhaps Bjorn or Rich could comment on the hardware setup... > > > The offending patch appears to be commit > > 0b8d7a6fbba81ffd06de701fa6178916ee9732c3 - "serial-add-irqflags-support" > > in the linux-next mega-patch. Reverting the changes to the 8250 driver > > allows the kernel to boot and operate normally. > > Strange as it simply moves a few flags around. That ought to make it easy > to figure however. You'd think. I'll gladly try any other patches or instrumentation to help sort this out. Altho' it is booting, I really would like to have my console back. Seems like the patch confuses the firmware managing the other end of the vsp link. Not hard to do, I imagine. Console log [long]: > Initializing cgroup subsys cpuset Linux version 2.6.31-rc3-mmotm-090716-1432+8250-patch (lts@spoke.lnx.usa.hp.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #54 SMP Thu Jul 23 08:29:33 EDT 2009 Command line: ro root=LABEL=RHEL53 console=ttyS1,115200N8 debug meminit_loglevel=3 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable) BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data) BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable) BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000087ffff000 (usable) DMI 2.4 present. last_pfn = 0x87ffff max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-back MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000880000000 aka 34816M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0x7fe57 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007fe57000 0000000000 - 007fe57000 page 4k kernel direct mapping tables up to 7fe57000 @ 100000-503000 init_memory_mapping: 0000000100000000-000000087ffff000 0100000000 - 087ffff000 page 4k kernel direct mapping tables up to 87ffff000 @ 1646000-5a69000 RAMDISK: 37daa000 - 37fef1f3 ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) ACPI: XSDT 000000007fe4ed00 00074 (v01 HP ProLiant 00000002 �? 0000162E) ACPI: FACP 000000007fe4ed80 000F4 (v03 HP A07 00000002 �? 0000162E) ACPI: DSDT 000000007fe4ee80 04959 (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 000000007fe4e100 00040 ACPI: SPCR 000000007fe4e140 00050 (v01 HP SPCRRBSU 00000001 �? 0000162E) ACPI: HPET 000000007fe4e1c0 00038 (v01 HP ProLiant 00000002 �? 0000162E) ACPI: SPMI 000000007fe4e200 00040 (v05 HP ProLiant 00000001 �? 0000162E) ACPI: ERST 000000007fe4e240 001D0 (v01 HP ProLiant 00000001 �? 0000162E) ACPI: APIC 000000007fe4e440 000C6 (v01 HP ProLiant 00000002 00000000) ACPI: SRAT 000000007fe4e580 001A0 (v01 AMD FAM_F_10 00000002 AMD 00000001) ACPI: FFFF 000000007fe4e980 00176 (v01 HP ProLiant 00000001 �? 0000162E) ACPI: BERT 000000007fe4eb00 00030 (v01 HP ProLiant 00000001 �? 0000162E) ACPI: HEST 000000007fe4eb40 00170 (v01 HP ProLiant 00000001 �? 0000162E) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: PXM 2 -> APIC 4 -> Node 2 SRAT: PXM 2 -> APIC 5 -> Node 2 SRAT: PXM 3 -> APIC 6 -> Node 3 SRAT: PXM 3 -> APIC 7 -> Node 3 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-80000000 SRAT: Node 0 PXM 0 100000000-280000000 SRAT: Node 1 PXM 1 280000000-480000000 SRAT: Node 2 PXM 2 480000000-680000000 SRAT: Node 3 PXM 3 680000000-880000000 NUMA: Allocated memnodemap from 8000 - 19040 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000280000000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000001a000 - 0000000000069fff] pages 50 (9 early reservations) ==> bootmem [0000000000 - 0280000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001644c10] TEXT DATA BSS ==> [0001000000 - 0001644c10] #3 [0037daa000 - 0037fef1f3] RAMDISK ==> [0037daa000 - 0037fef1f3] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #5 [0001645000 - 0001645114] BRK ==> [0001645000 - 0001645114] #6 [0000100000 - 0000501000] PGTABLE ==> [0000100000 - 0000501000] #7 [0001646000 - 0005264000] PGTABLE ==> [0001646000 - 0005264000] #8 [0000008000 - 0000019040] MEMNODEMAP ==> [0000008000 - 0000019040] Bootmem setup node 1 0000000280000000-0000000480000000 NODE_DATA [0000000280000000 - 0000000280003fff] bootmap [0000000280004000 - 0000000280043fff] pages 40 (9 early reservations) ==> bootmem [0280000000 - 0480000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0001000000 - 0001644c10] TEXT DATA BSS #3 [0037daa000 - 0037fef1f3] RAMDISK #4 [000009f400 - 0000100000] BIOS reserved #5 [0001645000 - 0001645114] BRK #6 [0000100000 - 0000501000] PGTABLE #7 [0001646000 - 0005264000] PGTABLE #8 [0000008000 - 0000019040] MEMNODEMAP Bootmem setup node 2 0000000480000000-0000000680000000 NODE_DATA [0000000480000000 - 0000000480003fff] bootmap [0000000480004000 - 0000000480043fff] pages 40 (9 early reservations) ==> bootmem [0480000000 - 0680000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0001000000 - 0001644c10] TEXT DATA BSS #3 [0037daa000 - 0037fef1f3] RAMDISK #4 [000009f400 - 0000100000] BIOS reserved #5 [0001645000 - 0001645114] BRK #6 [0000100000 - 0000501000] PGTABLE #7 [0001646000 - 0005264000] PGTABLE #8 [0000008000 - 0000019040] MEMNODEMAP Bootmem setup node 3 0000000680000000-000000087ffff000 NODE_DATA [0000000680000000 - 0000000680003fff] bootmap [0000000680004000 - 0000000680043fff] pages 40 (9 early reservations) ==> bootmem [0680000000 - 087ffff000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0001000000 - 0001644c10] TEXT DATA BSS #3 [0037daa000 - 0037fef1f3] RAMDISK #4 [000009f400 - 0000100000] BIOS reserved #5 [0001645000 - 0001645114] BRK #6 [0000100000 - 0000501000] PGTABLE #7 [0001646000 - 0005264000] PGTABLE #8 [0000008000 - 0000019040] MEMNODEMAP found SMP MP-table at [ffff8800000f4f80] f4f80 [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0 [ffffea0008c00000-ffffea000fbfffff] PMD -> [ffff880280200000-ffff8802871fffff] on node 1 [ffffea000fc00000-ffffea0016bfffff] PMD -> [ffff880480200000-ffff8804871fffff] on node 2 [ffffea0016c00000-ffffea001dbfffff] PMD -> [ffff880680200000-ffff8806871fffff] on node 3 sizeof(struct page) = 56 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0087ffff Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fe4e 0: 0x0007fe56 -> 0x0007fe57 0: 0x00100000 -> 0x00280000 1: 0x00280000 -> 0x00480000 2: 0x00480000 -> 0x00680000 3: 0x00680000 -> 0x0087ffff On node 0 totalpages: 2096622 DMA zone: 56 pages used for memmap DMA zone: 1141 pages reserved DMA zone: 2802 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505479 pages, LIFO batch:31 Normal zone: 21504 pages used for memmap Normal zone: 1551360 pages, LIFO batch:31 On node 1 totalpages: 2097152 Normal zone: 28672 pages used for memmap Normal zone: 2068480 pages, LIFO batch:31 On node 2 totalpages: 2097152 Normal zone: 28672 pages used for memmap Normal zone: 2068480 pages, LIFO batch:31 On node 3 totalpages: 2097151 Normal zone: 28672 pages used for memmap Normal zone: 2068479 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xd9af0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xd9af0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xd9fd0000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 17, address 0xd9fd0000, GSI 24-30 ACPI: IOAPIC (id[0x0a] address[0xd9fe0000] gsi_base[31]) IOAPIC[2]: apic_id 10, version 17, address 0xd9fe0000, GSI 31-37 ACPI: IOAPIC (id[0x0b] address[0xd9ff0000] gsi_base[38]) IOAPIC[3]: apic_id 11, version 17, address 0xd9ff0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: NMI_SRC (dfl dfl global_irq 28) ACPI: NMI_SRC (dfl dfl global_irq 35) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10228201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 62 Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:4 pcpu-lpage: sta/res/dyn=82656/8192/23840 unit=1048576 lpage=2097152 pcpu-lpage: 0 4 | 1 5 | 2 6 | 3 7 PERCPU: Remapped at ffffc90000000000 with large pages, static data 82656 bytes Built 4 zonelists in Zone order, mobility grouping on. Total pages: 8265080 Policy zone: Normal Kernel command line: ro root=LABEL=RHEL53 console=ttyS1,115200N8 debug meminit_loglevel=3 PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Memory: 32951992k/35651580k available (3357k kernel code, 2099272k absent, 600316k reserved, 1831k data, 516k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=4 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:1118 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2813.300 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [ttyS1] enabled allocated 335544320 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.60 BogoMIPS (lpj=2813300) Security Framework initialized Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys memory Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f ACPI: Core revision 20090625 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Dual-Core AMD Opteron(tm) Processor 8220 SE stepping 02 Booting processor 1 APIC 0x2 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5625.65 BogoMIPS (lpj=2812825) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/0x2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Dual-Core AMD Opteron(tm) Processor 8220 SE stepping 02 Booting processor 2 APIC 0x4 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5625.62 BogoMIPS (lpj=2812812) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/0x4 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Dual-Core AMD Opteron(tm) Processor 8220 SE stepping 02 Booting processor 3 APIC 0x6 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5625.63 BogoMIPS (lpj=2812816) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/0x6 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Dual-Core AMD Opteron(tm) Processor 8220 SE stepping 02 Booting processor 4 APIC 0x1 ip 0x6000 Initializing CPU#4 Calibrating delay using timer specific routine.. 5625.68 BogoMIPS (lpj=2812841) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 4/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 CPU4: Dual-Core AMD Opteron(tm) Processor 8220 SE stepping 02 Booting processor 5 APIC 0x3 ip 0x6000 Initializing CPU#5 Calibrating delay using timer specific routine.. 5625.65 BogoMIPS (lpj=2812828) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 5/0x3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 CPU5: Dual-Core AMD Opteron(tm) Processor 8220 SE stepping 02 Booting processor 6 APIC 0x5 ip 0x6000 Initializing CPU#6 Calibrating delay using timer specific routine.. 5625.66 BogoMIPS (lpj=2812832) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 6/0x5 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 CPU6: Dual-Core AMD Opteron(tm) Processor 8220 SE stepping 02 Booting processor 7 APIC 0x7 ip 0x6000 Initializing CPU#7 Calibrating delay using timer specific routine.. 5625.71 BogoMIPS (lpj=2812855) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 7/0x7 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 CPU7: Dual-Core AMD Opteron(tm) Processor 8220 SE stepping 02 Brought up 8 CPUs Total of 8 processors activated (45006.21 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0,4 level MC groups: 0 4 domain 1: span 0-7 level NODE groups: 0,4 1,5 2,6 3,7 CPU1 attaching sched-domain: domain 0: span 1,5 level MC groups: 1 5 domain 1: span 0-7 level NODE groups: 1,5 2,6 3,7 0,4 CPU2 attaching sched-domain: domain 0: span 2,6 level MC groups: 2 6 domain 1: span 0-7 level NODE groups: 2,6 3,7 0,4 1,5 CPU3 attaching sched-domain: domain 0: span 3,7 level MC groups: 3 7 domain 1: span 0-7 level NODE groups: 3,7 0,4 1,5 2,6 CPU4 attaching sched-domain: domain 0: span 0,4 level MC groups: 4 0 domain 1: span 0-7 level NODE groups: 0,4 1,5 2,6 3,7 CPU5 attaching sched-domain: domain 0: span 1,5 level MC groups: 5 1 domain 1: span 0-7 level NODE groups: 1,5 2,6 3,7 0,4 CPU6 attaching sched-domain: domain 0: span 2,6 level MC groups: 6 2 domain 1: span 0-7 level NODE groups: 2,6 3,7 0,4 1,5 CPU7 attaching sched-domain: domain 0: span 3,7 level MC groups: 7 3 domain 1: span 0-7 level NODE groups: 3,7 0,4 1,5 2,6 NET: Registered protocol family 16 node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [d0000000, d9efffff] node 1 link 2: mmio [d9f00000, dfefffff] node 0 link 1: mmio [e0000000, e3ffffff] node 1 link 2: mmio [e4000000, e7ffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000880000000 aka 34816M bus: [00,3f] on node 0 link 1 bus: 00 index 0 io port: [0, 3fff] bus: 00 index 1 mmio: [80000000, d9efffff] bus: 00 index 2 mmio: [dff00000, e3ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [e8000000, ffffffff] bus: 00 index 5 mmio: [880000000, fcffffffff] bus: [40,7f] on node 1 link 2 bus: 40 index 0 io port: [4000, ffff] bus: 40 index 1 mmio: [d9f00000, dfefffff] bus: 40 index 2 mmio: [e4000000, e7ffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xd9ae0000-0xd9ae0fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xd9ad0000-0xd9ad00ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:06.0: reg 20 io port: [0x500-0x50f] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:01:03.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff] pci 0000:01:03.0: reg 18 32bit mmio: [0xd9cf0000-0xd9cfffff] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:03.0: supports D1 D2 pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff] pci 0000:01:04.0: reg 14 32bit mmio: [0xd9ce0000-0xd9ce01ff] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold pci 0000:01:04.0: PME# disabled pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff] pci 0000:01:04.2: reg 14 32bit mmio: [0xd9cd0000-0xd9cd07ff] pci 0000:01:04.2: reg 18 32bit mmio: [0xd9cc0000-0xd9cc3fff] pci 0000:01:04.2: reg 1c 32bit mmio: [0xd9c00000-0xd9c7ffff] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold pci 0000:01:04.2: PME# disabled pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold pci 0000:01:04.4: PME# disabled pci 0000:01:04.6: reg 10 32bit mmio: [0xd9bf0000-0xd9bf00ff] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold pci 0000:01:04.6: PME# disabled pci 0000:00:09.0: transparent bridge pci 0000:00:09.0: bridge io port: [0x1000-0x2fff] pci 0000:00:09.0: bridge 32bit mmio: [0xd9b00000-0xd9cfffff] pci 0000:00:09.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff] pci 0000:08:00.0: reg 10 64bit mmio: [0xd9e00000-0xd9efffff] pci 0000:08:00.0: reg 18 io port: [0x3000-0x30ff] pci 0000:08:00.0: reg 1c 64bit mmio: [0xd9df0000-0xd9df0fff] pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x03ffff] pci 0000:08:00.0: supports D1 pci 0000:00:0c.0: bridge io port: [0x3000-0x3fff] pci 0000:00:0c.0: bridge 32bit mmio: [0xd9d00000-0xd9efffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0b.0: PME# disabled pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0c.0: PME# disabled pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0d.0: PME# disabled pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0e.0: PME# disabled pci 0000:40:10.0: Enabling HT MSI Mapping pci 0000:40:11.0: Enabling HT MSI Mapping PCI: peer root bus 40 res updated from pci conf pci 0000:41:01.0: reg 10 64bit mmio: [0xdc000000-0xddffffff] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:41:01.0: PME# supported from D3hot D3cold pci 0000:41:01.0: PME# disabled pci 0000:41:02.0: reg 10 64bit mmio: [0xda000000-0xdbffffff] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:41:02.0: PME# supported from D3hot D3cold pci 0000:41:02.0: PME# disabled pci 0000:40:10.0: bridge 32bit mmio: [0xda000000-0xddffffff] pci 0000:42:01.0: reg 10 io port: [0x4000-0x40ff] pci 0000:42:01.0: reg 14 64bit mmio: [0xdfee0000-0xdfefffff] pci 0000:42:01.0: reg 1c 64bit mmio: [0xdfec0000-0xdfedffff] pci 0000:42:01.0: reg 30 32bit mmio: [0x000000-0x0fffff] pci 0000:42:01.0: supports D1 D2 pci 0000:42:01.1: reg 10 io port: [0x4400-0x44ff] pci 0000:42:01.1: reg 14 64bit mmio: [0xdfea0000-0xdfebffff] pci 0000:42:01.1: reg 1c 64bit mmio: [0xdfe80000-0xdfe9ffff] pci 0000:42:01.1: reg 30 32bit mmio: [0x000000-0x0fffff] pci 0000:42:01.1: supports D1 D2 pci 0000:40:11.0: bridge io port: [0x4000-0x4fff] pci 0000:40:11.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT] ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5 ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *10 ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Expanded resource reserved due to conflict with PCI Bus #00 Expanded resource reserved due to conflict with PCI Bus #00 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 4 Switched to high resolution mode on CPU 6 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 5 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 7 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x73f has been reserved system 00:01: ioport range 0x800-0x8fe has been reserved system 00:01: ioport range 0x900-0x9fe has been reserved system 00:01: ioport range 0x9ff-0x9ff has been reserved system 00:01: ioport range 0xa00-0xafe has been reserved system 00:01: ioport range 0xaff-0xaff has been reserved system 00:01: ioport range 0xb00-0xbfe has been reserved system 00:01: ioport range 0xbff-0xbff has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xcf9-0xcf9 could not be reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0xc00-0xc03 has been reserved system 00:01: ioport range 0x2f8-0x2ff has been reserved pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 pci 0000:00:09.0: IO window: 0x1000-0x2fff pci 0000:00:09.0: MEM window: 0xd9b00000-0xd9cfffff pci 0000:00:09.0: PREFETCH window: 0xd0000000-0xd7ffffff pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08 pci 0000:00:0c.0: IO window: 0x3000-0x3fff pci 0000:00:0c.0: MEM window: 0xd9d00000-0xd9efffff pci 0000:00:0c.0: PREFETCH window: 0x80000000-0x800fffff pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: disabled pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0e.0: IO window: disabled pci 0000:00:0e.0: MEM window: disabled pci 0000:00:0e.0: PREFETCH window: disabled pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:40:0b.0: PCI bridge, secondary bus 0000:4f pci 0000:40:0b.0: IO window: disabled pci 0000:40:0b.0: MEM window: disabled pci 0000:40:0b.0: PREFETCH window: disabled pci 0000:40:0c.0: PCI bridge, secondary bus 0000:4c pci 0000:40:0c.0: IO window: disabled pci 0000:40:0c.0: MEM window: disabled pci 0000:40:0c.0: PREFETCH window: disabled pci 0000:40:0d.0: PCI bridge, secondary bus 0000:49 pci 0000:40:0d.0: IO window: disabled pci 0000:40:0d.0: MEM window: disabled pci 0000:40:0d.0: PREFETCH window: disabled pci 0000:40:0e.0: PCI bridge, secondary bus 0000:46 pci 0000:40:0e.0: IO window: disabled pci 0000:40:0e.0: MEM window: disabled pci 0000:40:0e.0: PREFETCH window: disabled pci 0000:40:10.0: PCI bridge, secondary bus 0000:41 pci 0000:40:10.0: IO window: disabled pci 0000:40:10.0: MEM window: 0xda000000-0xddffffff pci 0000:40:10.0: PREFETCH window: 0xde000000-0xde0fffff pci 0000:40:11.0: PCI bridge, secondary bus 0000:42 pci 0000:40:11.0: IO window: 0x4000-0x4fff pci 0000:40:11.0: MEM window: 0xdfe00000-0xdfefffff pci 0000:40:11.0: PREFETCH window: 0xde100000-0xde2fffff pci 0000:40:0b.0: setting latency timer to 64 pci 0000:40:0c.0: setting latency timer to 64 pci 0000:40:0d.0: setting latency timer to 64 pci 0000:40:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0x3fff] pci_bus 0000:00: resource 1 mem: [0x80000000-0xd9efffff] pci_bus 0000:00: resource 2 mem: [0xdff00000-0xe3ffffff] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff] pci_bus 0000:00: resource 4 mem: [0xe8000000-0xffffffff] pci_bus 0000:00: resource 5 mem: [0x880000000-0xfcffffffff] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xd9b00000-0xd9cfffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] pci_bus 0000:01: resource 3 io: [0x00-0x3fff] pci_bus 0000:01: resource 4 mem: [0x80000000-0xd9efffff] pci_bus 0000:01: resource 5 mem: [0xdff00000-0xe3ffffff] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff] pci_bus 0000:01: resource 7 mem: [0xe8000000-0xffffffff] pci_bus 0000:01: resource 8 mem: [0x880000000-0xfcffffffff] pci_bus 0000:08: resource 0 io: [0x3000-0x3fff] pci_bus 0000:08: resource 1 mem: [0xd9d00000-0xd9efffff] pci_bus 0000:08: resource 2 pref mem [0x80000000-0x800fffff] pci_bus 0000:40: resource 0 io: [0x4000-0xffff] pci_bus 0000:40: resource 1 mem: [0xd9f00000-0xdfefffff] pci_bus 0000:40: resource 2 mem: [0xe4000000-0xe7ffffff] pci_bus 0000:41: resource 1 mem: [0xda000000-0xddffffff] pci_bus 0000:41: resource 2 pref mem [0xde000000-0xde0fffff] pci_bus 0000:42: resource 0 io: [0x4000-0x4fff] pci_bus 0000:42: resource 1 mem: [0xdfe00000-0xdfefffff] pci_bus 0000:42: resource 2 pref mem [0xde100000-0xde2fffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... debug: unmapping init memory ffff880037daa000..ffff880037ff0000 platform rtc_cmos: registered platform RTC device (no PNP device found) HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 32768 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:03.0: Boot video device pci 0000:01:04.4: HCRESET not completed yet! pci 0000:40:0b.0: Found enabled HT MSI Mapping pci 0000:40:0c.0: Found enabled HT MSI Mapping pci 0000:40:0d.0: Found enabled HT MSI Mapping pci 0000:40:0e.0: Found enabled HT MSI Mapping alloc irq_desc for 62 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:0c.0: irq 62 for MSI/MSI-X pcieport-driver 0000:00:0c.0: setting latency timer to 64 alloc irq_desc for 63 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:0d.0: irq 63 for MSI/MSI-X pcieport-driver 0000:00:0d.0: setting latency timer to 64 alloc irq_desc for 64 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:0e.0: irq 64 for MSI/MSI-X pcieport-driver 0000:00:0e.0: setting latency timer to 64 alloc irq_desc for 65 on node 1 alloc kstat_irqs on node 1 pcieport-driver 0000:40:0b.0: irq 65 for MSI/MSI-X pcieport-driver 0000:40:0b.0: setting latency timer to 64 alloc irq_desc for 66 on node 1 alloc kstat_irqs on node 1 pcieport-driver 0000:40:0c.0: irq 66 for MSI/MSI-X pcieport-driver 0000:40:0c.0: setting latency timer to 64 alloc irq_desc for 67 on node 1 alloc kstat_irqs on node 1 pcieport-driver 0000:40:0d.0: irq 67 for MSI/MSI-X pcieport-driver 0000:40:0d.0: setting latency timer to 64 alloc irq_desc for 68 on node 1 alloc kstat_irqs on node 1 pcieport-driver 0000:40:0e.0: irq 68 for MSI/MSI-X pcieport-driver 0000:40:0e.0: setting latency timer to 64 processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 processor LNXCPU:04: registered as cooling_device4 processor LNXCPU:05: registered as cooling_device5 processor LNXCPU:06: registered as cooling_device6 processor LNXCPU:07: registered as cooling_device7 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Platform driver 'serial8250' needs updating - please use dev_pm_ops 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 cciss 0000:08:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 alloc irq_desc for 69 on node 0 alloc kstat_irqs on node 0 cciss 0000:08:00.0: irq 69 for MSI/MSI-X alloc irq_desc for 70 on node 0 alloc kstat_irqs on node 0 cciss 0000:08:00.0: irq 70 for MSI/MSI-X alloc irq_desc for 71 on node 0 alloc kstat_irqs on node 0 cciss 0000:08:00.0: irq 71 for MSI/MSI-X alloc irq_desc for 72 on node 0 alloc kstat_irqs on node 0 cciss 0000:08:00.0: irq 72 for MSI/MSI-X IRQ 71/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs cciss0: <0x3230> at PCI 0000:08:00.0 IRQ 71 using DAC blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 cciss/c0d0: p1 p2 p3 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 cciss/c0d1: p1 p2 p3 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 cciss/c0d2: p1 p2 p3 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 cciss/c0d3: p1 p2 p3 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 cciss/c0d4: p1 p2 p3 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 cciss/c0d5: p1 p2 p3 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 cciss/c0d6: p1 p2 p3 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 blocks= 143305920 block_size= 512 heads=255, sectors=32, cylinders=17562 cciss/c0d7: p1 p2 p3 Uniform Multi-Platform E-IDE driver amd74xx 0000:00:06.0: UDMA133 controller amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xa3) amd74xx 0000:00:06.0: IDE port disabled amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0500-0x0507 Probing IDE interface ide0... hda: DW-224E-R, ATAPI CD/DVD-ROM drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 usbcore: registered new interface driver rio500 rio500: v1.1:USB Rio 500 driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 Platform driver 'i8042' needs updating - please use dev_pm_ops serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 debug: unmapping init memory ffffffff81524000..ffffffff815a5000 Write protecting the kernel read-only data: 4780k ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xd9ad0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ae0000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected uhci_hcd: USB Universal Host Controller Interface driver ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! usb 1-6: new high speed USB device using ehci_hcd and address 2 uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-6: configuration #1 chosen from 1 choice hub 1-6:1.0: USB hub found hub 1-6:1.0: 4 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input0 generic-usb 0003:03F0:1027.0001: input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 input: HP Virtual Keyboard as /class/input/input1 generic-usb 0003:03F0:1027.0002: input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 usb 3-2: new full speed USB device using uhci_hcd and address 3 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 7 ports detected Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded FS-Cache: Netfs 'nfs' registered for caching svc: failed to register lockdv1 RPC service (errno 97). Those last messages would indicate that, altho' I've lost the console, the init scripts have run. At this point, the system doesn't respond to pings, so I didn't try anything else. Turns out, this is the result of my network setup from home. I can ssh into the system, so it did boot all the way. The console is just dead. I tried "echo foo >/dev/console", which works on other Proliant DL* and see: -bash: echo: write error: Input/output error Lee -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/