Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754702AbZINHxX (ORCPT ); Mon, 14 Sep 2009 03:53:23 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754448AbZINHxX (ORCPT ); Mon, 14 Sep 2009 03:53:23 -0400 Received: from hera.kernel.org ([140.211.167.34]:35377 "EHLO hera.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752996AbZINHxW (ORCPT ); Mon, 14 Sep 2009 03:53:22 -0400 Message-ID: <4AADF4E2.9030407@kernel.org> Date: Mon, 14 Sep 2009 16:46:42 +0900 From: Tejun Heo User-Agent: Thunderbird 2.0.0.22 (X11/20090605) MIME-Version: 1.0 To: tfjellstrom@shaw.ca CC: Chris Webb , linux-scsi@vger.kernel.org, Ric Wheeler , Andrei Tanas , NeilBrown , linux-kernel@vger.kernel.org, IDE/ATA development list , Jeff Garzik , Mark Lord Subject: Re: MD/RAID time out writing superblock References: <4A950FA6.4020408@redhat.com> <20090907114442.GG18831@arachsys.com> <20090907165504.GJ31003@lifeintegrity.com> <200909071726.56432.tfjellstrom@shaw.ca> In-Reply-To: <200909071726.56432.tfjellstrom@shaw.ca> X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.0 (hera.kernel.org [127.0.0.1]); Mon, 14 Sep 2009 07:46:45 +0000 (UTC) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1031 Lines: 27 Hello, Thomas Fjellstrom wrote: > I have the same issue with a single WD 2TB Green drive. Technically two, but > it always only gets errors from the same drive, so I was assuming it was the > drive. I only have to setup the raid0 array, and put some light load on it for > the kernel to start complaining, and eventually it just kicks the drive > completely with the following messages: > > sd 3:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK > end_request: I/O error, dev sdb, sector 202026972 > > The drive does work fine prior to the frozen timeout errors. And I was using > it in windows (same raid0 config) just fine with no errors what so ever. Can you post full dmesg output? The above doesn't tell much about ATA side of things. Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/