Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755478AbZINMcC (ORCPT ); Mon, 14 Sep 2009 08:32:02 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755469AbZINMcB (ORCPT ); Mon, 14 Sep 2009 08:32:01 -0400 Received: from mail.valinux.co.jp ([210.128.90.3]:39158 "EHLO mail.valinux.co.jp" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755455AbZINMcA (ORCPT ); Mon, 14 Sep 2009 08:32:00 -0400 Date: Mon, 14 Sep 2009 21:32:03 +0900 (JST) Message-Id: <20090914.213203.59660671.ryov@valinux.co.jp> To: linux-kernel@vger.kernel.org, dm-devel@redhat.com, containers@lists.linux-foundation.org, virtualization@lists.linux-foundation.org, xen-devel@lists.xensource.com, agk@redhat.com Subject: [PATCH 9/9] blkio-cgroup-v12: The document of a cgroup support for dm-ioband From: Ryo Tsuruta In-Reply-To: <20090914.213143.39162487.ryov@valinux.co.jp> References: <20090914.213047.112618086.ryov@valinux.co.jp> <20090914.213118.183028978.ryov@valinux.co.jp> <20090914.213143.39162487.ryov@valinux.co.jp> X-Mailer: Mew version 5.2.52 on Emacs 22.1 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13277 Lines: 346 The document of a cgroup support for dm-ioband. Signed-off-by: Hirokazu Takahashi Signed-off-by: Ryo Tsuruta --- Documentation/cgroups/blkio.txt | 314 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 313 insertions(+), 1 deletion(-) Index: linux-2.6.31/Documentation/cgroups/blkio.txt =================================================================== --- linux-2.6.31.orig/Documentation/cgroups/blkio.txt +++ linux-2.6.31/Documentation/cgroups/blkio.txt @@ -11,6 +11,9 @@ I/O with a little enhancement. 2. Setting up blkio-cgroup +Note: If dm-ioband is to be used with blkio-cgroup, then the dm-ioband +patch needs to be applied first. + The following kernel config options are required. CONFIG_CGROUPS=y @@ -43,7 +46,316 @@ determined by retrieving the ID number f the page cgroup is associated with the page which is involved in the I/O. -4. Contact +If the dm-ioband support patch was applied then the blkio.devices and +blkio.settings files will also be present. + +4. Using dm-ioband and blkio-cgroup + +This section describes how to set up dm-ioband and blkio-cgroup in +order to control bandwidth on a per cgroup per logical volume basis. +The example used in this section assumes that there are two LVM volume +groups on individual hard disks and two logical volumes on each volume +group. + + Table. LVM configurations + + -------------------------------------------------------------- + | LVM volume group | vg0 on /dev/sda | vg1 on /dev/sdb | + |----------------------+-------------------+-------------------| + | LVM logical volume | lv0 | lv1 | lv0 | lv1 | + -------------------------------------------------------------- + +4.1. Creating a dm-ioband logical device + +A dm-ioband logical device needs to be created and stacked on the +device that is to bandwidth controlled. In this example the dm-ioband +logical devices are stacked on each of the existing LVM logical +volumes. By using the LVM facilities there is no need to unmount any +logical volumes, even in the case of a volume being used as the root +device. The following script is an example of how to stack and remove +dm-ioband devices. + +==================== cut here (ioband.sh) ==================== +#!/bin/sh +# +# NOTE: You must run "ioband.sh stop" to restore the device-mapper +# settings before changing logical volume settings, such as activate, +# rename, resize and so on. These constraints would be eliminated by +# enhancing LVM tools to support dm-ioband. + +logvols="vg0-lv0 vg0-lv1 vg1-lv0 vg1-lv1" + +start() +{ + for lv in $logvols; do + volgrp=${lv%%-*} + orig=${lv}-orig + + # clone an existing logical volume. + /sbin/dmsetup table $lv | /sbin/dmsetup create $orig + + # stack a dm-ioband device on the clone. + size=$(/sbin/blockdev --getsize /dev/mapper/$orig) + cat<<-EOM | /sbin/dmsetup load ${lv} + 0 $size ioband /dev/mapper/${orig} ${volgrp} 0 0 cgroup weight 0 :100 + EOM + + # activate the new setting. + /sbin/dmsetup resume $lv + done +} + +stop() +{ + for lv in $logvols; do + orig=${lv}-orig + + # restore the original setting. + /sbin/dmsetup table $orig | /sbin/dmsetup load $lv + + # activate the new setting. + /sbin/dmsetup resume $lv + + # remove the clone. + /sbin/dmsetup remove $orig + done +} + +case "$1" in + start) + start + ;; + stop) + stop + ;; +esac +exit 0 +==================== cut here (ioband.sh) ==================== + +The following diagram shows how dm-ioband devices are stacked on and +removed from the logical volumes. + + Figure. stacking and removing dm-ioband devices + + run "ioband.sh start" + ===> + + ----------------------- ----------------------- + | lv0 | lv1 | | lv0 | lv1 | + |(dm-linear)|(dm-linear)| |(dm-ioband)|(dm-ioband)| + |-----------------------| |-----------+-----------| + | vg0 | | lv0-orig | lv1-orig | + ----------------------- |(dm-linear)|(dm-linear)| + |-----------------------| + | vg0 | + ----------------------- + <=== + run "ioband.sh stop" + +After creating the dm-ioband devices, the settings can be observed by +reading the blkio.devices file. + +# cat /cgroup/blkio.devices +vg0 policy=weight io_throttle=4 io_limit=192 token=768 carryover=2 + vg0-lv0 + vg0-lv1 +vg1 policy=weight io_throttle=4 io_limit=192 token=768 carryover=2 + vg1-lv0 + vg1-lv1 + +The first field in the first line is the symbolic name for an ioband +device group, and the subsequent fields are settings for the ioband +device group. The settings can be changed by writing to the +blkio.devices, for example: + +# echo vg1 policy range-bw > /cgroup/blkio.devices + +Please refer to Document/device-mapper/ioband.txt which describes the +details of the ioband device group settings. + +The second and the third indented lines "vg0-lv0" and "vg0-lv1" are +the names of the dm-ioband devices that belong to the ioband device +group. Typically, dm-ioband devices that reside on the same hard disk +should belong to the same ioband device group in order to share the +bandwidth of the hard disk. + +dm-ioband is not restricted to working with LVM, it may work in +conjunction with any type of block device. Please refer to +Documentation/device-mapper/ioband.txt for more details. + +4.2 Setting up dm-ioband through the blkio-cgroup interface + +The following table shows the given settings for this example. The +bandwidth will be assigned on a per cgroup per logical volume basis. + + Table. Settings for each cgroup + + -------------------------------------------------------------- + | LVM volume group | vg0 on /dev/sda | vg1 on /dev/sdb | + |----------------------+-------------------+-------------------| + | LVM logical volume | lv0 | lv1 | lv0 | lv1 | + |----------------------+-------------------+-------------------| + | bandwidth control | relative | absolute | + | policy | weight | bandwidth limit | + |----------------------+-------------------+-------------------| + | unit | weight [%] | throughput [KB/s] | + |----------------------+-------------------+-------------------| + | settings for cgroup1 | 30 | 50 | 400 | 900 | + |----------------------+---------+---------+---------+---------| + | settings for cgroup2 | 60 | 20 | 200 | 600 | + |----------------------+---------+---------+---------+---------| + | for root cgroup | 70 | 30 | 100 | 300 | + -------------------------------------------------------------- + +The set-up is described step-by-step below. + +1) Create new cgroups using the mkdir command + +# mkdir /cgroup/1 +# mkdir /cgroup/2 + +2) Set bandwidth control policy on each ioband device group + +The set-up of bandwidth control policy is done by writing to +blkio.devices file. + +# echo vg0 policy weight > /cgroup/blkio.devices +# echo vg1 policy range-bw > /cgroup/blkio.devices + +3) Set up the root cgroup + +The root cgroup represents the default blkio-cgroup. If an I/O is +performed by a process in a cgroup and the cgroup is not set up by +blkio-cgroup, the I/O is charged to the root cgroup. + +The set-up of the root cgroup is done by writing to blkio.settings +file in the cgroup's root directory. The following commands write +the settings of each logical volume to that file. + +# echo vg0-lv0 70 > /cgroup/bklio.settings +# echo vg0-lv1 30 > /cgroup/bklio.settings +# echo vg1-lv0 100:100 > /cgroup/blkio.settings +# echo vg1-lv1 300:300 > /cgroup/blkio.settings + +The settings can be verified by reading the blkio.settings file. The +first field is the symbolic name for an ioband device group, and the +second field is an ioband device name. The following example shows +that vg0-lv0 and vg0-lv1 belong to the same ioband device group and +share the bandwidth of sda according to their weights. + +# cat /cgroup/blkio.settings +sda vg0-lv0 weight=70% +sda vg0-lv1 weight=30% +sdb vg1-lv0 range-bw=100:100 +sdb vg1-lv1 range-bw=300:300 + +4) Set up cgroup1 and cgroup2 + +New cgroups are set up in the same manner as the root cgroup. + +Settings for cgroup1 +# echo vg0-lv0 30 > /cgroup/1/blkio.settings +# echo vg0-lv1 50 > /cgroup/1/bklio.settings +# echo vg1-lv0 400:400 > /cgroup/1/blkio.settings +# echo vg1-lv1 900:900 > /cgroup/1/bklio.settings + +Settings for cgroup2 +# echo vg0-lv0 60 > /cgroup/2/blkio.settings +# echo vg0-lv1 20 > /cgroup/2/bklio.settings +# echo vg1-lv0 200:200 > /cgroup/2/blkio.settings +# echo vg1-lv1 600:600 > /cgroup/2/bklio.settings + +Again, the settings can be verified by reading the appropriate +blkio.settings file. + +# cat /cgroup/1/blkio.settings +vg0-lv0 weight=30% +vg0-lv1 weight=50% +vg1-lv0 range-bw=400:400 +vg1-lv1 range-bw=900:900 + +If only the logical volume name is specified, the entry for the +logical volume is removed. + +# echo vg0-lv1 > /cgroup/1/vlkio.setting +# cat /cgroup/1/blkio.settings +vg0-lv0 weight=30% +vg0-lv1 weight=50% +vg1-lv0 range-bw=400:400 + +4.3 How bandwidth is distributed in the weight policy. + +The weight policy assigns bandwidth proportional to the weight of each +cgroup in a hierarchical manner. The bandwidth assigned to a parent +cgroup is distributed among the parent and its children according to +their weight. For example, if there are two child cgroups under the +parent cgroup, cgroup1 is assigned 60% of the parent bandwidth, and +cgroup2 is assigned 30%, then 10% (100% - 60% + 30%) remains for the +parent cgroup. + + Figure. bandwidth distribution among a parent and children + + (100% - 30% - 60% = 10%) + parent + / \ + cgroup1 cgroup2 + (30%) (60%) + +The followings show how the bandwidth is calculated ans assigned to +each cgroup in the given settings which are shown above. + + Figure. hierarchical settings by the weight policy + + (70%) --- /dev/sda --- (30%) + + vg0/lv0 vg0/lv1 + + (10%) (30%) + root(parent) root(parent) + / \ / \ + cgroup1 cgroup2 cgroup1 cgroup2 + (30%) (60%) (50%) (20%) + + + Table. actual bandwidth assigned to each cgroup + + ------------------------------------------------------------ + | | | weight | actual bandwidth | + | shared | logical | for a root | assigned to each cgroup | + | device | volume | group | against /dev/sda | + |----------+---------+------------+--------------------------| + | | | | parent 70% * 10% = 7% | + | | vg0/lv0 | 70% | cgroup1 70% * 30% = 21% | + | | | | cgroup2 70% * 60% = 42% | + | /dev/sda |---------+------------+--------------------------| + | | | | parent 30% * 30% = 9% | + | | vg1/lv1 | 30% | cgroup1 30% * 50% = 15% | + | | | | cgruop2 30% * 20% = 6% | + ------------------------------------------------------------ + +4.4 Getting IO statistics per cgroup. + +The blkio.stats file provides IO statistics per dm-ioband per cgroup. +This file consists of 12 fields separated by whitespace. The format is +almost the same as /proc/diskstats and /sys/block/dev/stat files, but +some fields are reserved for future use and they always return 0. + +Field # Name units description +------- ---- ----- ----------- +1 device name name of dm-ioband device +2 read I/Os requests number of read I/Os processed +3 *reserved* +4 read sectors sectors number of sectors read +5 *reserved* +6 write I/Os requests number of write I/Os processed +7 *reserved* +8 write sectors sectors number of sectors written +9 *reserved* +10 in_flight requests number of I/Os currently in flight +11 *reserved* +12 *reserved* + +5. Contact Linux Block I/O Bandwidth Control Project http://sourceforge.net/projects/ioband/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/