Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754494AbZIOWy0 (ORCPT ); Tue, 15 Sep 2009 18:54:26 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752600AbZIOWyV (ORCPT ); Tue, 15 Sep 2009 18:54:21 -0400 Received: from mga11.intel.com ([192.55.52.93]:32658 "EHLO mga11.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751680AbZIOWyS convert rfc822-to-8bit (ORCPT ); Tue, 15 Sep 2009 18:54:18 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.44,392,1249282800"; d="scan'208";a="727273254" From: "Graham, David" To: Karol Lewandowski , "Rafael J. Wysocki" CC: "linux-kernel@vger.kernel.org" , "e1000-devel@lists.sourceforge.net" , "netdev@vger.kernel.org" Date: Tue, 15 Sep 2009 15:54:20 -0700 Subject: RE: [E1000-devel] [BUG 2.6.30+] e100 sometimes causes oops during resume Thread-Topic: [E1000-devel] [BUG 2.6.30+] e100 sometimes causes oops during resume Thread-Index: Aco1/RuNV4H21AuCT0+uZEVB5MbbXAAVeu+l Message-ID: <13830B75AD5A2F42848F92269B11996F5BF592C3@orsmsx509.amr.corp.intel.com> References: <20090915120538.GA26806@bizet.domek.prywatny> In-Reply-To: <20090915120538.GA26806@bizet.domek.prywatny> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 51655 Lines: 1082 A v2.6.30..v2.6.31 diff shows that this is probably exposed by Rafael Wysocki's commit 6905b1f1, which now allows systems with e100 to sleep. If I understand correctly, it looks like these systems simply couldn't sleep before. Is that right Rafael?. I don't think its likely that the commit is a direct cause of the problem, but that the suspend/resume cycle now allows us to see another issue. Maybe e100 is leaking memory on suspend/resume cycles, or something else is leaking memory, or memory is becoming fragmented and the e100 driver is improperly requesting and being failed on an 'atomic' memory allocation from a heavily fragmented memory map. Or something else. So we ( Jesse Brandeburg & I ) have some ideas, and I am trying to get a symptom here. and going through the e100 memory allocation code looking for clues. Dave ________________________________________ From: Karol Lewandowski [karol.k.lewandowski@gmail.com] Sent: Tuesday, September 15, 2009 5:05 AM To: e1000-devel@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Subject: [E1000-devel] [BUG 2.6.30+] e100 sometimes causes oops during resume Hello, I'm getting following oops sometimes during resume on my Thinkpad T21 (where "sometimes" means about 10/1 good/bad ratio): ifconfig: page allocation failure. order:5, mode:0x8020 Pid: 26450, comm: ifconfig Not tainted 2.6.31-rc9-revert #13 Call Trace: [] ? __alloc_pages_nodemask+0x402/0x444 [] ? dma_generic_alloc_coherent+0x4a/0xab [] ? dma_generic_alloc_coherent+0x0/0xab [] ? e100_alloc_cbs+0xc7/0x174 [] ? e100_up+0x1b/0xf5 [] ? e100_open+0x17/0x41 [] ? dev_open+0x8f/0xc5 [] ? dev_change_flags+0xa2/0x155 [] ? devinet_ioctl+0x22a/0x51c [] ? sock_ioctl+0x0/0x1e4 [] ? sock_ioctl+0x1c0/0x1e4 [] ? sock_ioctl+0x0/0x1e4 [] ? vfs_ioctl+0x16/0x4a [] ? do_vfs_ioctl+0x48a/0x4c1 [] ? handle_mm_fault+0x1e0/0x42c [] ? do_page_fault+0x2ce/0x2e4 [] ? sys_ioctl+0x2c/0x42 [] ? sysenter_do_call+0x12/0x26 Mem-Info: DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 Normal per-cpu: CPU 0: hi: 90, btch: 15 usd: 9 Active_anon:10268 active_file:11642 inactive_anon:24589 inactive_file:13029 unevictable:0 dirty:9 writeback:0 unstable:0 free:894 slab:2149 mapped:3962 pagetables:449 bounce:0 DMA free:1076kB min:124kB low:152kB high:184kB active_anon:936kB inactive_anon:3388kB active_file:2776kB inactive_file:3080kB unevictable:0kB present:15868kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 238 238 Normal free:2500kB min:1908kB low:2384kB high:2860kB active_anon:40136kB inactive_anon:94968kB active_file:43792kB inactive_file:49036kB unevictable:0kB present:243776kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 DMA: 1*4kB 0*8kB 3*16kB 2*32kB 1*64kB 1*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1076kB Normal: 415*4kB 65*8kB 18*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2500kB 29934 total pagecache pages 5112 pages in swap cache Swap cache stats: add 104796, delete 99684, find 78817/93038 Free swap = 457116kB Total swap = 514040kB 65520 pages RAM 1667 pages reserved 11094 pages shared 56751 pages non-shared ifconfig: page allocation failure. order:5, mode:0x8020 Pid: 26450, comm: ifconfig Not tainted 2.6.31-rc9-revert #13 Call Trace: [] ? __alloc_pages_nodemask+0x402/0x444 [] ? dma_generic_alloc_coherent+0x4a/0xab [] ? dma_generic_alloc_coherent+0x0/0xab [] ? e100_alloc_cbs+0xc7/0x174 [] ? e100_up+0x1b/0xf5 [] ? e100_open+0x17/0x41 [] ? dev_open+0x8f/0xc5 [] ? dev_change_flags+0xa2/0x155 [] ? devinet_ioctl+0x22a/0x51c [] ? sock_ioctl+0x0/0x1e4 [] ? sock_ioctl+0x1c0/0x1e4 [] ? sock_ioctl+0x0/0x1e4 [] ? vfs_ioctl+0x16/0x4a [] ? do_vfs_ioctl+0x48a/0x4c1 [] ? unmap_region+0xa2/0xd1 [] ? remove_vma+0x43/0x48 [] ? do_munmap+0x20e/0x228 [] ? sys_ioctl+0x2c/0x42 [] ? sysenter_do_call+0x12/0x26 Mem-Info: DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 Normal per-cpu: CPU 0: hi: 90, btch: 15 usd: 8 Active_anon:10316 active_file:11612 inactive_anon:24605 inactive_file:13025 unevictable:0 dirty:9 writeback:66 unstable:0 free:864 slab:2149 mapped:3985 pagetables:462 bounce:0 DMA free:1076kB min:124kB low:152kB high:184kB active_anon:936kB inactive_anon:3388kB active_file:2776kB inactive_file:3080kB unevictable:0kB present:15868kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 238 238 Normal free:2380kB min:1908kB low:2384kB high:2860kB active_anon:40328kB inactive_anon:95032kB active_file:43672kB inactive_file:49020kB unevictable:0kB present:243776kB pages_scanned:128 all_unreclaimable? no lowmem_reserve[]: 0 0 0 DMA: 1*4kB 0*8kB 3*16kB 2*32kB 1*64kB 1*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1076kB Normal: 415*4kB 60*8kB 15*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2380kB 29960 total pagecache pages 5172 pages in swap cache Swap cache stats: add 104862, delete 99690, find 78819/93040 Free swap = 456856kB Total swap = 514040kB 65520 pages RAM 1667 pages reserved 11419 pages shared 56744 pages non-shared This is caused by ifup scripts that try to bring interface up after resume. When I do so manually it doesn't produce error. System seems to behave normally despite that error. This is on 2.6.31-rc9 (with unrelated patch reverted), 2.6.31-rc8 shown similiar behaviour. Neither 2.6.31 nor Linus' HEAD seems to address this issue. Hardware: 0:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09) Subsystem: Intel Corporation EtherExpress PRO/100+ MiniPCI Flags: bus master, medium devsel, latency 66, IRQ 11 Memory at e8120000 (32-bit, non-prefetchable) [size=4K] I/O ports at 1800 [size=64] Memory at e8100000 (32-bit, non-prefetchable) [size=128K] [virtual] Expansion ROM at 20100000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Kernel driver in use: e100 Full dmesg follows, including successful suspend-resume and oops (at end) of unsuccessful one. Linux version 2.6.31-rc9-revert (karol@wagner) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #13 Mon Sep 7 21:16:17 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data) BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0xfff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CBFFF write-protect CC000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FF0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled initial memory mapped : 0 - 00800000 init_memory_mapping: 0000000000000000-000000000fff0000 0000000000 - 0000400000 page 4k 0000400000 - 000fc00000 page 2M 000fc00000 - 000fff0000 page 4k kernel direct mapping tables up to fff0000 @ 7000-c000 ACPI: RSDP 000f7120 00014 (v00 PTLTD ) ACPI: RSDT 0fff4c5d 0002C (v01 PTLTD RSDT 06041160 LTP 00000000) ACPI: FACP 0fffeb65 00074 (v01 IBM TP-T21 06041160 00000000) ACPI: DSDT 0fff4c89 09EDC (v01 IBM TP-T21 06041160 MSFT 0100000C) ACPI: FACS 0ffff000 00040 ACPI: BOOT 0fffebd9 00027 (v01 PTLTD $SBFTBL$ 06041160 LTP 00000001) 255MB LOWMEM available. mapped low ram: 0 - 0fff0000 low ram: 0 - 0fff0000 node 0 low ram: 00000000 - 0fff0000 node 0 bootmap 00001000 - 00003000 (6 early reservations) ==> bootmem [0000000000 - 000fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 0000516940] TEXT DATA BSS ==> [0000100000 - 0000516940] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #3 [0000517000 - 00005190d9] BRK ==> [0000517000 - 00005190d9] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #5 [0000001000 - 0000003000] BOOTMAP ==> [0000001000 - 0000003000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0000fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0000fff0 On node 0 totalpages: 65423 free_area_init_node: node 0, pgdat c0458514, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 480 pages used for memmap Normal zone: 60944 pages, LIFO batch:15 ACPI: PM-Timer IO Port: 0x1008 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64911 Kernel command line: root=/dev/sda2 resume=/dev/sda1 ro PID hash table entries: 1024 (order: 10, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Memory: 255100k/262080k available (2359k kernel code, 6468k reserved, 1086k data, 256k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) vmalloc : 0xd07f0000 - 0xfffe3000 ( 759 MB) lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB) .init : 0xc045e000 - 0xc049e000 ( 256 kB) .data : 0xc034dc2b - 0xc045d720 (1086 kB) .text : 0xc0100000 - 0xc034dc2b (2359 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:16 CPU 0 irqstacks, hard=c042b000 soft=c042c000 Fast TSC calibration using PIT Detected 796.603 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 1593.20 BogoMIPS (lpj=3186412) Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K mce: CPU supports 5 MCE banks Performance Counters: no APIC, boot with the "lapic" boot parameter to force-enable it. no hardware sampling interrupt available. p6 PMU driver. ... version: 0 ... bit width: 32 ... generic counters: 2 ... value mask: 00000000ffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 0 ... counter mask: 0000000000000003 CPU: Intel Pentium III (Coppermine) stepping 0a Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ACPI: setting ELCR to 0200 (from 0800) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PSER] (off) ACPI: Power Resource [PSIO] (on) ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] pci 0000:00:02.0: reg 10 32bit mmio: [0x50000000-0x50000fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0x50100000-0x50100fff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: reg 10 32bit mmio: [0xe8120000-0xe8120fff] pci 0000:00:03.0: reg 14 io port: [0x1800-0x183f] pci 0000:00:03.0: reg 18 32bit mmio: [0xe8100000-0xe811ffff] pci 0000:00:03.0: reg 30 32bit mmio: [0x000000-0x0fffff] pci 0000:00:03.0: supports D1 D2 pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.1: reg 10 io port: [0x1840-0x1847] pci 0000:00:03.1: reg 14 32bit mmio: [0xe8121000-0xe8121fff] pci 0000:00:03.1: supports D1 D2 pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.1: PME# disabled pci 0000:00:05.0: reg 10 32bit mmio: [0xe8122000-0xe8122fff] pci 0000:00:05.0: reg 14 32bit mmio: [0xe8000000-0xe80fffff] pci 0000:00:05.0: supports D1 D2 pci 0000:00:07.1: reg 20 io port: [0x1850-0x185f] pci 0000:00:07.2: reg 20 io port: [0x1860-0x187f] pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7 pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xd0000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x100000-0xfffffff could not be reserved system 00:00: iomem range 0xfff80000-0xffffffff has been reserved system 00:02: ioport range 0x1000-0x103f has been reserved system 00:02: ioport range 0x1040-0x104f has been reserved system 00:02: ioport range 0xfe00-0xfe0f has been reserved system 00:09: ioport range 0x15e0-0x15ef has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xf0000000-0xf7ffffff pci 0000:00:01.0: PREFETCH window: 0x20000000-0x200fffff pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02 pci 0000:00:02.0: IO window: 0x001400-0x0014ff pci 0000:00:02.0: IO window: 0x001c00-0x001cff pci 0000:00:02.0: PREFETCH window: 0x10000000-0x13ffffff pci 0000:00:02.0: MEM window: 0x14000000-0x17ffffff pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06 pci 0000:00:02.1: IO window: 0x002000-0x0020ff pci 0000:00:02.1: IO window: 0x002400-0x0024ff pci 0000:00:02.1: PREFETCH window: 0x18000000-0x1bffffff pci 0000:00:02.1: MEM window: 0x1c000000-0x1fffffff pci 0000:00:02.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:02.1: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf7ffffff] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x200fffff] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff] pci_bus 0000:02: resource 1 io: [0x1c00-0x1cff] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x13ffffff] pci_bus 0000:02: resource 3 mem: [0x14000000-0x17ffffff] pci_bus 0000:06: resource 0 io: [0x2000-0x20ff] pci_bus 0000:06: resource 1 io: [0x2400-0x24ff] pci_bus 0000:06: resource 2 pref mem [0x18000000-0x1bffffff] pci_bus 0000:06: resource 3 mem: [0x1c000000-0x1fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x35 set to 0x1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) ROMFS MTD (C) 2007 Red Hat, Inc. msgmni has been set to 498 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:01:00.0: Boot video device savagefb 0000:01:00.0: power state changed by ACPI to D0 savagefb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 savagefb: mapped io at d0880000 savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 savagefb: mapped framebuffer at d0980000, pbase == f0000000 savagefb v0.4.0_2.6: 8064kB VRAM, using 800x600, 37.878kHz, 60Hz Console: switching to colour frame buffer device 100x37 fb: S3 Savage/IX-MV frame buffer device vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device ACPI: AC Adapter [AC] (on-line) input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button as /class/input/input2 ACPI: Sleep Button [SLPB] Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 Switched to high resolution mode on CPU 0 ACPI: Processor [CPU0] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (44 C) Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial 00:0c: activated 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 parport_pc 00:0d: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] ACPI: Battery Slot [BAT0] (battery present) brd: module loaded loop: module loaded ata_piix 0000:00:07.1: version 2.13 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 e100 0000:00:03.0: PME# disabled e100: eth0: e100_probe: addr 0xe8120000, irq 11, MAC addr 00:10:a4:89:e8:84 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.20. input: AT Translated Set 2 keyboard as /class/input/input3 ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 ata1.00: ATA-7: SAMSUNG HM060HC, YJ100-19, max UDMA/100 ata1.00: 117231408 sectors, multi 16: LBA48 ata1.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM060HC YJ10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:0:0: Attached scsi generic sg0 type 0 sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk Clocksource tsc unstable (delta = -117760284 ns) IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input4 rtc_cmos 00:06: setting system clock to 2009-09-10 08:21:25 UTC (1252570885) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:2. Freeing unused kernel memory: 256k freed uhci_hcd: USB Universal Host Controller Interface driver ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-rc9-revert uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:0130] yenta_cardbus 0000:00:02.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:00:02.0: TI: mfunc 0x00001000, devctl 0x66 yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0438, PCI irq 11 yenta_cardbus 0000:00:02.0: Socket status: 30000006 Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ALSA sound/pci/cs46xx/cs46xx_lib.c:432: cs46xx: failure waiting for FIFO command to complete input: PC Speaker as /class/input/input5 Non-volatile memory driver v1.3 thinkpad_acpi: ThinkPad ACPI Extras v0.23 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS KZET34WW (1.16 ), EC unknown Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby input: ThinkPad Extra Buttons as /class/input/input6 yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:0130] yenta_cardbus 0000:00:02.1: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:00:02.1: TI: mfunc 0x00001000, devctl 0x66 yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0438, PCI irq 11 yenta_cardbus 0000:00:02.1: Socket status: 30000006 Adding 514040k swap on /dev/sda1. Priority:-1 extents:1 across:514040k EXT3 FS on sda2, internal journal fuse init (API version 7.12) kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with writeback data mode. e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready lp0: using parport0 (interrupt-driven). lp0: console ready ppdev: user-space parallel port driver [drm] Initialized drm 1.1.0 20060810 eth0: no IPv6 routers present [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0 usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-1: New USB device found, idVendor=046d, idProduct=c050 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB-PS/2 Optical Mouse usb 1-1: Manufacturer: Logitech usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input7 generic-usb 0003:046D:C050.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:07.2-1/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0d: disabled serial 00:0c: disabled savagefb 0000:01:00.0: power state changed by ACPI to D3 uhci_hcd 0000:00:07.2: PCI INT D disabled ACPI handle has no context! e100 0000:00:03.0: PCI INT A disabled e100 0000:00:03.0: PME# enabled ACPI: Preparing to enter system sleep state S3 Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x20002000) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a000f0, writing 0x22a000f0) e100 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900013, writing 0x2900017) savagefb 0000:01:00.0: power state changed by ACPI to D0 e100 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# disabled uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usb usb1: root hub lost power or was reset savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 serial 00:0c: activated parport_pc 00:0d: activated sd 0:0:0:0: [sda] Starting disk ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata1.00: configured for UDMA/33 ata1: EH complete usb 1-1: reset low speed USB device using uhci_hcd and address 2 Restarting tasks ... done. Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0d: disabled serial 00:0c: disabled savagefb 0000:01:00.0: power state changed by ACPI to D3 uhci_hcd 0000:00:07.2: PCI INT D disabled Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled ACPI handle has no context! ACPI handle has no context! e100 0000:00:03.0: PME# enabled ACPI: Preparing to enter system sleep state S3 Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x20002000) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a000f0, writing 0x22a000f0) e100 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900013, writing 0x2900017) savagefb 0000:01:00.0: power state changed by ACPI to D0 e100 0000:00:03.0: PME# disabled Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usb usb1: root hub lost power or was reset savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 serial 00:0c: activated parport_pc 00:0d: activated sd 0:0:0:0: [sda] Starting disk ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata1.00: configured for UDMA/33 ata1: EH complete usb 1-1: reset low speed USB device using uhci_hcd and address 2 Restarting tasks ... done. e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready ALSA sound/pci/cs46xx/dsp_spos.c:1884: dsp_spos: SPIOWriteTask not responding e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.04 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0d: disabled serial 00:0c: disabled savagefb 0000:01:00.0: power state changed by ACPI to D3 uhci_hcd 0000:00:07.2: PCI INT D disabled Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled ACPI handle has no context! ACPI handle has no context! e100 0000:00:03.0: PME# enabled ACPI: Preparing to enter system sleep state S3 Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x20002000) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a000f0, writing 0x22a000f0) e100 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900013, writing 0x2900017) savagefb 0000:01:00.0: power state changed by ACPI to D0 e100 0000:00:03.0: PME# disabled Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usb usb1: root hub lost power or was reset savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 serial 00:0c: activated parport_pc 00:0d: activated sd 0:0:0:0: [sda] Starting disk ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata1.00: configured for UDMA/33 ata1: EH complete usb 1-1: reset low speed USB device using uhci_hcd and address 2 Restarting tasks ... done. e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready ALSA sound/pci/cs46xx/dsp_spos.c:1884: dsp_spos: SPIOWriteTask not responding e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ALSA sound/pci/cs46xx/cs46xx_lib.c:432: cs46xx: failure waiting for FIFO command to complete Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.06 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0d: disabled serial 00:0c: disabled savagefb 0000:01:00.0: power state changed by ACPI to D3 uhci_hcd 0000:00:07.2: PCI INT D disabled ACPI handle has no context! e100 0000:00:03.0: PME# enabled ACPI: Preparing to enter system sleep state S3 Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x20002000) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a000f0, writing 0x22a000f0) e100 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900013, writing 0x2900017) savagefb 0000:01:00.0: power state changed by ACPI to D0 e100 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# disabled uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usb usb1: root hub lost power or was reset savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 serial 00:0c: activated parport_pc 00:0d: activated sd 0:0:0:0: [sda] Starting disk ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata1.00: configured for UDMA/33 ata1: EH complete usb 1-1: reset low speed USB device using uhci_hcd and address 2 Restarting tasks ... done. Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.06 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0d: disabled serial 00:0c: disabled savagefb 0000:01:00.0: power state changed by ACPI to D3 uhci_hcd 0000:00:07.2: PCI INT D disabled ACPI handle has no context! e100 0000:00:03.0: PME# enabled ACPI: Preparing to enter system sleep state S3 Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x20002000) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a000f0, writing 0x22a000f0) e100 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900013, writing 0x2900017) savagefb 0000:01:00.0: power state changed by ACPI to D0 e100 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# disabled uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usb usb1: root hub lost power or was reset savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 serial 00:0c: activated parport_pc 00:0d: activated sd 0:0:0:0: [sda] Starting disk ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata1.00: configured for UDMA/33 ata1: EH complete usb 1-1: reset low speed USB device using uhci_hcd and address 2 Restarting tasks ... done. Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.05 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0d: disabled serial 00:0c: disabled savagefb 0000:01:00.0: power state changed by ACPI to D3 uhci_hcd 0000:00:07.2: PCI INT D disabled ACPI handle has no context! e100 0000:00:03.0: PME# enabled ACPI: Preparing to enter system sleep state S3 Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x20002000) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a000f0, writing 0x22a000f0) e100 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900013, writing 0x2900017) savagefb 0000:01:00.0: power state changed by ACPI to D0 e100 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# disabled uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usb usb1: root hub lost power or was reset savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 serial 00:0c: activated parport_pc 00:0d: activated sd 0:0:0:0: [sda] Starting disk ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata1.00: configured for UDMA/33 ata1: EH complete usb 1-1: reset low speed USB device using uhci_hcd and address 2 Restarting tasks ... done. Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present udevd version 125 started Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.04 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.08 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0d: disabled serial 00:0c: disabled savagefb 0000:01:00.0: power state changed by ACPI to D3 uhci_hcd 0000:00:07.2: PCI INT D disabled ACPI handle has no context! e100 0000:00:03.0: PME# enabled ACPI: Preparing to enter system sleep state S3 Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x20002000) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a000f0, writing 0x22a000f0) e100 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900013, writing 0x2900017) savagefb 0000:01:00.0: power state changed by ACPI to D0 e100 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# disabled uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usb usb1: root hub lost power or was reset savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 serial 00:0c: activated parport_pc 00:0d: activated sd 0:0:0:0: [sda] Starting disk ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata1.00: configured for UDMA/33 ata1: EH complete usb 1-1: reset low speed USB device using uhci_hcd and address 2 Restarting tasks ... done. Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0d: disabled serial 00:0c: disabled savagefb 0000:01:00.0: power state changed by ACPI to D3 uhci_hcd 0000:00:07.2: PCI INT D disabled ACPI handle has no context! e100 0000:00:03.0: PME# enabled ACPI: Preparing to enter system sleep state S3 Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x20002000) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a000f0, writing 0x22a000f0) e100 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900013, writing 0x2900017) savagefb 0000:01:00.0: power state changed by ACPI to D0 e100 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# disabled uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usb usb1: root hub lost power or was reset savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 serial 00:0c: activated parport_pc 00:0d: activated sd 0:0:0:0: [sda] Starting disk ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata1.00: configured for UDMA/33 ata1: EH complete usb 1-1: reset low speed USB device using uhci_hcd and address 2 Restarting tasks ... done. Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present usb 1-1: USB disconnect, address 2 Sound Fusion CS46xx 0000:00:05.0: PCI INT A disabled PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.05 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0d: disabled serial 00:0c: disabled savagefb 0000:01:00.0: power state changed by ACPI to D3 uhci_hcd 0000:00:07.2: PCI INT D disabled ACPI handle has no context! e100 0000:00:03.0: PME# enabled ACPI: Preparing to enter system sleep state S3 Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x20002000) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a000f0, writing 0x22a000f0) e100 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900013, writing 0x2900017) savagefb 0000:01:00.0: power state changed by ACPI to D0 e100 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# disabled uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 usb usb1: root hub lost power or was reset savagefb: probed videoram: 8192k savagefb: Detected current MCLK value of 83045 kHz savagefb: 1024x768 TFT LCD panel detected and active savagefb: Limiting video mode to 1024x768 serial 00:0c: activated parport_pc 00:0d: activated sd 0:0:0:0: [sda] Starting disk ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata1.00: configured for UDMA/33 ata1: EH complete Restarting tasks ... done. Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ifconfig: page allocation failure. order:5, mode:0x8020 Pid: 26450, comm: ifconfig Not tainted 2.6.31-rc9-revert #13 Call Trace: [] ? __alloc_pages_nodemask+0x402/0x444 [] ? dma_generic_alloc_coherent+0x4a/0xab [] ? dma_generic_alloc_coherent+0x0/0xab [] ? e100_alloc_cbs+0xc7/0x174 [] ? e100_up+0x1b/0xf5 [] ? e100_open+0x17/0x41 [] ? dev_open+0x8f/0xc5 [] ? dev_change_flags+0xa2/0x155 [] ? devinet_ioctl+0x22a/0x51c [] ? sock_ioctl+0x0/0x1e4 [] ? sock_ioctl+0x1c0/0x1e4 [] ? sock_ioctl+0x0/0x1e4 [] ? vfs_ioctl+0x16/0x4a [] ? do_vfs_ioctl+0x48a/0x4c1 [] ? handle_mm_fault+0x1e0/0x42c [] ? do_page_fault+0x2ce/0x2e4 [] ? sys_ioctl+0x2c/0x42 [] ? sysenter_do_call+0x12/0x26 Mem-Info: DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 Normal per-cpu: CPU 0: hi: 90, btch: 15 usd: 9 Active_anon:10268 active_file:11642 inactive_anon:24589 inactive_file:13029 unevictable:0 dirty:9 writeback:0 unstable:0 free:894 slab:2149 mapped:3962 pagetables:449 bounce:0 DMA free:1076kB min:124kB low:152kB high:184kB active_anon:936kB inactive_anon:3388kB active_file:2776kB inactive_file:3080kB unevictable:0kB present:15868kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 238 238 Normal free:2500kB min:1908kB low:2384kB high:2860kB active_anon:40136kB inactive_anon:94968kB active_file:43792kB inactive_file:49036kB unevictable:0kB present:243776kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 DMA: 1*4kB 0*8kB 3*16kB 2*32kB 1*64kB 1*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1076kB Normal: 415*4kB 65*8kB 18*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2500kB 29934 total pagecache pages 5112 pages in swap cache Swap cache stats: add 104796, delete 99684, find 78817/93038 Free swap = 457116kB Total swap = 514040kB 65520 pages RAM 1667 pages reserved 11094 pages shared 56751 pages non-shared ifconfig: page allocation failure. order:5, mode:0x8020 Pid: 26450, comm: ifconfig Not tainted 2.6.31-rc9-revert #13 Call Trace: [] ? __alloc_pages_nodemask+0x402/0x444 [] ? dma_generic_alloc_coherent+0x4a/0xab [] ? dma_generic_alloc_coherent+0x0/0xab [] ? e100_alloc_cbs+0xc7/0x174 [] ? e100_up+0x1b/0xf5 [] ? e100_open+0x17/0x41 [] ? dev_open+0x8f/0xc5 [] ? dev_change_flags+0xa2/0x155 [] ? devinet_ioctl+0x22a/0x51c [] ? sock_ioctl+0x0/0x1e4 [] ? sock_ioctl+0x1c0/0x1e4 [] ? sock_ioctl+0x0/0x1e4 [] ? vfs_ioctl+0x16/0x4a [] ? do_vfs_ioctl+0x48a/0x4c1 [] ? unmap_region+0xa2/0xd1 [] ? remove_vma+0x43/0x48 [] ? do_munmap+0x20e/0x228 [] ? sys_ioctl+0x2c/0x42 [] ? sysenter_do_call+0x12/0x26 Mem-Info: DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 Normal per-cpu: CPU 0: hi: 90, btch: 15 usd: 8 Active_anon:10316 active_file:11612 inactive_anon:24605 inactive_file:13025 unevictable:0 dirty:9 writeback:66 unstable:0 free:864 slab:2149 mapped:3985 pagetables:462 bounce:0 DMA free:1076kB min:124kB low:152kB high:184kB active_anon:936kB inactive_anon:3388kB active_file:2776kB inactive_file:3080kB unevictable:0kB present:15868kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 238 238 Normal free:2380kB min:1908kB low:2384kB high:2860kB active_anon:40328kB inactive_anon:95032kB active_file:43672kB inactive_file:49020kB unevictable:0kB present:243776kB pages_scanned:128 all_unreclaimable? no lowmem_reserve[]: 0 0 0 DMA: 1*4kB 0*8kB 3*16kB 2*32kB 1*64kB 1*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1076kB Normal: 415*4kB 60*8kB 15*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2380kB 29960 total pagecache pages 5172 pages in swap cache Swap cache stats: add 104862, delete 99690, find 78819/93040 Free swap = 456856kB Total swap = 514040kB 65520 pages RAM 1667 pages reserved 11419 pages shared 56744 pages non-shared usb 1-1: new low speed USB device using uhci_hcd and address 3 usb 1-1: New USB device found, idVendor=046d, idProduct=c050 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB-PS/2 Optical Mouse usb 1-1: Manufacturer: Logitech usb 1-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input8 generic-usb 0003:046D:C050.0002: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:07.2-1/input0 e100 0000:00:03.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/