Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757034AbZIVREj (ORCPT ); Tue, 22 Sep 2009 13:04:39 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756998AbZIVREg (ORCPT ); Tue, 22 Sep 2009 13:04:36 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:50768 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756976AbZIVREZ (ORCPT ); Tue, 22 Sep 2009 13:04:25 -0400 Message-ID: <51076.192.168.10.88.1253639068.squirrel@dbdmail.itg.ti.com> Date: Tue, 22 Sep 2009 22:34:28 +0530 (IST) Subject: [PATCH 1/3] OMAP UART: Adding support for omap-serial driver. From: "Govindraj.R" To: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org User-Agent: SquirrelMail/1.4.3a X-Mailer: SquirrelMail/1.4.3a MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT X-Priority: 3 (Normal) Importance: Normal Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 56040 Lines: 2046 From: Govindraj R This patch adds support for OMAP3430-HIGH SPEED UART Controller. Signed-off-by: Govindraj R Reviewed-by: Alan Cox Reviewed-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/omap-serial.h | 156 ++ drivers/serial/Kconfig | 92 + drivers/serial/Makefile | 1 drivers/serial/omap-serial.c | 1745 ++++++++++++++++++++++++++ 4 files changed, 1994 insertions(+) diff --git a/arch/arm/plat-omap/include/mach/omap-serial.h b/arch/arm/plat-omap/include/mach/omap-serial.h new file mode 100644 index 0000000..17b6d17 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap-serial.h @@ -0,0 +1,156 @@ +/* + * arch/arm/plat-omap/include/mach/omap-serial.h + * + * Driver for OMAP3430 UART controller. + * + * Copyright (C) 2009 Texas Instruments. + * + * Authors: + * Govindraj R + * Thara Gopinath + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __OMAP_SERIAL_H__ +#define __OMAP_SERIAL_H__ + +#include +#include + +#ifdef CONFIG_PM +#include <../arch/arm/mach-omap2/prm.h> +#include <../arch/arm/mach-omap2/pm.h> +#include <../arch/arm/mach-omap2/prm-regbits-34xx.h> +#include +#endif + +/* TI OMAP CONSOLE */ +#define PORT_OMAP 86 +#define DRIVER_NAME "omap-hsuart" + +/* tty device name used by omap-serial driver, + * in bootargs we specify as console=ttyO0 if uart1 + * is used as console uart. + */ +#define DEVICE_NAME "ttyO" + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#ifdef CONFIG_ARCH_OMAP34XX +#define OMAP_MDR1_DISABLE 0x07 +#define OMAP_MDR1_MODE13X 0x03 +#define OMAP_MDR1_MODE16X 0x00 +#define OMAP_MODE13X_SPEED 230400 +#endif + +#define CONSOLE_NAME "console=" + +#define UART_CLK (48000000) +#define QUART_CLK (1843200) + +#define QUART (0x3) + +#define SLEEP_TIMEOUT (5 * HZ) +#define RX_TIMEOUT (3 * HZ) + +struct uart_dma_info { + int dma_enabled; + int rx_dma_bufsize; + int rx_timeout; + }; + +struct omap_uart_state { + int clocked; + struct clk *ick; + struct clk *fck; + int num; + int can_sleep; + + void __iomem *wk_st; + void __iomem *wk_en; + u32 wk_mask; + u32 padconf; + +#ifdef CONFIG_PM + struct timer_list timer; + u32 timeout; + int context_valid; + /* Registers to be saved/restored for OFF-mode */ + u16 dll; + u16 dlh; + u16 ier; + u16 sysc; + u16 scr; + u16 wer; +#endif +}; + +struct uart_omap_dma { + u8 uart_dma_tx; + u8 uart_dma_rx; + int rx_dma_channel; + int tx_dma_channel; + /* Physical adress of RX DMA buffer */ + dma_addr_t rx_buf_dma_phys; + /* Physical adress of TX DMA buffer */ + dma_addr_t tx_buf_dma_phys; + /* + * Buffer for rx dma.It is not required for tx because the buffer + * comes from port structure + */ + unsigned int uart_base; + unsigned char *rx_buf; + unsigned int prev_rx_dma_pos; + int tx_buf_size; + int tx_dma_state; + int rx_dma_state; + spinlock_t tx_lock; + spinlock_t rx_lock; + /* timer to poll activity on rx dma */ + struct timer_list rx_timer; + int rx_buf_size; + int rx_timeout; +}; + +struct uart_omap_port { + struct uart_port port; + struct uart_omap_dma uart_dma; + struct platform_device *pdev; + + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char fcr; + unsigned char efr; + + int use_dma; + int is_buf_dma_alloced; + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ + unsigned int lsr_break_flag; +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + unsigned char msr_saved_flags; + char name[20]; + spinlock_t uart_lock; + unsigned long port_activity; +}; + +extern void omap_uart_idle_init(int num); +extern char *saved_command_line; + +#endif /* __OMAP_SERIAL_H__ */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 6553833..30f3b27 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1359,6 +1359,98 @@ config SERIAL_OF_PLATFORM Currently, only 8250 compatible ports are supported, but others can easily be added. +config SERIAL_OMAP + bool "OMAP serial port support" + depends on ARM && ARCH_OMAP + select SERIAL_CORE + help + If you have a machine based on an Texas Instruments OMAP CPU you + can enable its onboard serial ports by enabling this option. + +config SERIAL_OMAP_CONSOLE + bool "Console on OMAP serial port" + depends on SERIAL_OMAP + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Texas Instruments OMAP + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_OMAP_DMA_UART1 + bool "UART1 DMA support" + depends on SERIAL_OMAP + help + If you have enabled the serial port on the Texas Instruments OMAP + CPU you can enable the DMA transfer on UART 1 by answering + to this option. + +config SERIAL_OMAP_UART1_RXDMA_TIMEOUT + int "Timeout value for RX DMA in microseconds" + depends on SERIAL_OMAP_DMA_UART1 + default "1" + help + Set the timeout value in which you want the data pulled by RX dma to + be passed to the tty framework. + +config SERIAL_OMAP_UART1_RXDMA_BUFSIZE + int "DMA buffer size for RX in bytes" + depends on SERIAL_OMAP_DMA_UART1 + default "4096" + help + Set the dma buffer size for UART Rx + +config SERIAL_OMAP_DMA_UART2 + bool "UART2 DMA support" + depends on SERIAL_OMAP + help + If you have enabled the serial port on the Texas Instruments OMAP + CPU you can enable the DMA transfer on UART 2 by answering + to this option. + +config SERIAL_OMAP_UART2_RXDMA_TIMEOUT + int "Timeout value for RX DMA in microseconds" + depends on SERIAL_OMAP_DMA_UART2 + default "1" + help + Set the timeout value in which you want the data pulled by RX dma to + be passed to the tty framework. + +config SERIAL_OMAP_UART2_RXDMA_BUFSIZE + int "DMA buffer size for RX in bytes" + depends on SERIAL_OMAP_DMA_UART2 + default "4096" + help + Set the dma buffer size for UART Rx + +config SERIAL_OMAP_DMA_UART3 + bool "UART3 DMA support" + depends on SERIAL_OMAP + help + If you have enabled the serial port on the Texas Instruments OMAP + CPU you can enable the DMA transfer on UART 3 by answering + to this option. + +config SERIAL_OMAP_UART3_RXDMA_TIMEOUT + int "Timeout value for RX DMA in microseconds" + depends on SERIAL_OMAP_DMA_UART3 + default "1" + help + Set the timeout value in which you want the data pulled by RX dma to + be passed to the tty framework. + +config SERIAL_OMAP_UART3_RXDMA_BUFSIZE + int "DMA buffer size for RX in bytes" + depends on SERIAL_OMAP_DMA_UART3 + default "4096" + help + Set the dma buffer size for UART Rx + config SERIAL_OF_PLATFORM_NWPSERIAL tristate "NWP serial port driver" depends on PPC_OF && PPC_DCR diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index d5a2998..db38f2c 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -79,3 +79,4 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o obj-$(CONFIG_SERIAL_QE) += ucc_uart.o obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o +obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c new file mode 100644 index 0000000..527642f --- /dev/null +++ b/drivers/serial/omap-serial.c @@ -0,0 +1,1745 @@ +/* + * drivers/serial/omap-serial.c + * + * Driver for OMAP3430 UART controller. + * + * Copyright (C) 2009 Texas Instruments. + * + * Authors: + * Govindraj R + * Thara Gopinath + * + * PM Framework based on arch/arm/mach-omap2/serial.c + * by Kevin Hilman. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static struct uart_omap_port *ui[OMAP_MAX_NR_PORTS]; +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; + +/* Forward declaration of functions */ +static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); +static void serial_omap_rx_timeout(unsigned long uart_no); +static void serial_omap_start_rxdma(struct uart_omap_port *up); +static int serial_omap_remove(struct platform_device *dev); + +static inline void omap_uart_block_sleep(int num); +static void omap_uart_smart_idle_enable(int num, int enable); +static inline void omap_uart_enable_clocks(int num); + +#ifdef DEBUG +static void serial_omap_display_reg(struct uart_port *port); +#endif + +int console_detect(char *str) +{ + char *next, *start = NULL; + int i; + + i = strlen(CONSOLE_NAME); + next = saved_command_line; + + while ((next = strchr(next, 'c')) != NULL) { + if (!strncmp(next, CONSOLE_NAME, i)) { + start = next; + break; + } else { + next++; + } + } + if (!start) + return -EPERM; + i = 0; + start = strchr(start, '=') + 1; + while (*start != ',') { + str[i++] = *start++; + if (i > 6) { + pr_err("%s : Invalid Console Name\n", __func__); + return -EPERM; + } + } + str[i] = '\0'; + return 0; +} + +static inline unsigned int serial_in(struct uart_omap_port *up, int offset) +{ + offset <<= up->port.regshift; + if (up->pdev->id != 4) + return readb(up->port.membase + offset); + else + return readw(up->port.membase + offset); +} + +static inline void serial_out(struct uart_omap_port *up, int offset, int value) +{ + offset <<= up->port.regshift; + if (up->pdev->id != 4) + writeb(value, up->port.membase + offset); + else + writew(value, up->port.membase + offset); +} + +static inline void serial_omap_clear_fifos(struct uart_omap_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +/* + * We have written our own function to get the divisor so as to support + * 13x mode. + */ +static unsigned int +serial_omap_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int divisor; + if (baud > OMAP_MODE13X_SPEED && baud != 3000000) + divisor = 13; + else + divisor = 16; + return port->uartclk/(baud * divisor); +} + +static void serial_omap_stop_rxdma(struct uart_omap_port *up) +{ + if (up->uart_dma.rx_dma_state) { + del_timer_sync(&up->uart_dma.rx_timer); + omap_stop_dma(up->uart_dma.rx_dma_channel); + omap_free_dma(up->uart_dma.rx_dma_channel); + up->uart_dma.rx_dma_channel = 0xFF; + up->uart_dma.rx_dma_state = 0x0; + } +} + +static void serial_omap_enable_ms(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void serial_omap_stop_tx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + if (up->use_dma) { + if (up->uart_dma.tx_dma_channel != 0xFF) { + /* + * Check if dma is still active . If yes do nothing, + * return. Else stop dma + */ + int status = omap_readl(OMAP34XX_DMA4_BASE + + OMAP_DMA4_CCR(up->uart_dma.tx_dma_channel)); + if (status & (1 << 7)) + return; + omap_stop_dma(up->uart_dma.tx_dma_channel); + omap_free_dma(up->uart_dma.tx_dma_channel); + up->uart_dma.tx_dma_channel = 0xFF; + } + } + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_omap_stop_rx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + serial_omap_stop_rxdma(up); + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + +} + +static inline void receive_chars(struct uart_omap_port *up, int *status) +{ + struct tty_struct *tty = up->port.info->port.tty; + unsigned int ch, flag; + int max_count = 256; + + do { + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) + flag = TTY_BREAK; + else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); +ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_omap_port *up) +{ + struct circ_buf *xmit = &up->port.info->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_omap_stop_tx(&up->port); + return; + } + + count = up->port.fifosize / 4; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_omap_stop_tx(&up->port); +} + +static void serial_omap_start_tx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + if (up->use_dma && !(up->port.x_char)) { + + struct circ_buf *xmit = &up->port.info->xmit; + unsigned int start = up->uart_dma.tx_buf_dma_phys + + (xmit->tail & (UART_XMIT_SIZE - 1)); + if (uart_circ_empty(xmit) || up->uart_dma.tx_dma_state) + return; + spin_lock(&(up->uart_dma.tx_lock)); + up->uart_dma.tx_dma_state = 1; + spin_unlock(&(up->uart_dma.tx_lock)); + + up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); + /* It is a circular buffer. See if the buffer has wounded back. + * If yes it will have to be transferred in two separate dma + * transfers */ + if (start + up->uart_dma.tx_buf_size >= + up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) + up->uart_dma.tx_buf_size = + (up->uart_dma.tx_buf_dma_phys + + UART_XMIT_SIZE) - start; + + if (up->uart_dma.tx_dma_channel == 0xFF) + omap_request_dma(up->uart_dma.uart_dma_tx, + "UART Tx DMA", + (void *)uart_tx_dma_callback, up, + &(up->uart_dma.tx_dma_channel)); + omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, start, 0, 0); + + omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.tx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_tx, 0); + + omap_start_dma(up->uart_dma.tx_dma_channel); + + } else if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static unsigned int check_modem_status(struct uart_omap_port *up) +{ + int status; + status = serial_in(up, UART_MSR); + + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + + if ((status & UART_MSR_ANY_DELTA) == 0) + return status; + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + up->port.info != NULL) { + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change + (&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change + (&up->port, status & UART_MSR_CTS); + wake_up_interruptible(&up->port.info->delta_msr_wait); + } + + return status; +} + +/* + * This handles the interrupt from one port. + */ +static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) +{ + struct uart_omap_port *up = dev_id; + unsigned int iir, lsr; + + omap_uart_block_sleep(up->pdev->id - 1); + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + + lsr = serial_in(up, UART_LSR); + if ((iir & 0x4) && up->use_dma) { + up->ier &= ~UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + serial_omap_start_rxdma(up); + } else if (lsr & UART_LSR_DR) { + receive_chars(up, &lsr); + } + check_modem_status(up); + if ((lsr & UART_LSR_THRE) && (iir & 0x2)) + transmit_chars(up); + + up->port_activity = jiffies; + return IRQ_HANDLED; +} + +static unsigned int serial_omap_tx_empty(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags; + unsigned int ret; + + dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_omap_get_mctrl(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char status; + unsigned int ret; + + status = check_modem_status(up); + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char mcr = 0; + + dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + serial_out(up, UART_MCR, mcr); +} + +static void serial_omap_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags; + + dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int serial_omap_startup(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags; + int irq_flags = 0; + int retval; + + omap_uart_smart_idle_enable(up->pdev->id - 1, 0); + + if (up->port.flags & UPF_SHARE_IRQ) + irq_flags |= IRQF_SHARED; + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_omap_irq, irq_flags, + up->name, up); + if (retval) + return retval; + + dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_omap_clear_fifos(up); + /* For Hardware flow control */ + serial_out(up, UART_MCR, 0x2); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + if (!is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT1; + } else { + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + if (is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT2; + } + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + up->msr_saved_flags = 0; + + if (up->port.flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + if (up->use_dma) { + if (!up->is_buf_dma_alloced) { + free_page((unsigned long)up->port.info->xmit.buf); + up->port.info->xmit.buf = NULL; + up->port.info->xmit.buf = dma_alloc_coherent(NULL, + UART_XMIT_SIZE, + (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), + 0); + up->is_buf_dma_alloced = 1; + } + init_timer(&(up->uart_dma.rx_timer)); + up->uart_dma.rx_timer.function = serial_omap_rx_timeout; + up->uart_dma.rx_timer.data = up->pdev->id; + /* Currently the buffer size is 4KB. Can increase it */ + up->uart_dma.rx_buf = dma_alloc_coherent(NULL, + up->uart_dma.rx_buf_size, + (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0); + } + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + + up->port_activity = jiffies; + return 0; +} + +static void serial_omap_shutdown(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags; + + dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_omap_clear_fifos(up); + + /* + * Read data port to reset things, and then free the irq + */ + (void) serial_in(up, UART_RX); + if (up->use_dma) { + int tmp; + if (up->is_buf_dma_alloced) { + dma_free_coherent(up->port.dev, + UART_XMIT_SIZE, + up->port.info->xmit.buf, + up->uart_dma.tx_buf_dma_phys); + up->port.info->xmit.buf = NULL; + up->is_buf_dma_alloced = 0; + } + serial_omap_stop_rx(port); + dma_free_coherent(up->port.dev, + up->uart_dma.rx_buf_size, + up->uart_dma.rx_buf, + up->uart_dma.rx_buf_dma_phys); + up->uart_dma.rx_buf = NULL; + tmp = serial_in(up, UART_OMAP_SYSC) & 0x7; + serial_out(up, UART_OMAP_SYSC, tmp); /* force-idle */ + } + + free_irq(up->port.irq, up); +} + +static inline void +serial_omap_configure_xonxoff + (struct uart_omap_port *up, struct ktermios *termios) +{ + unsigned char efr = 0; + + up->lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, 0xbf); + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB); + + serial_out(up, UART_XON1, termios->c_cc[VSTART]); + serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); + + /* IXON Flag: + * Enable XON/XOFF flow control on output. + * Transmit XON1, XOFF1 + */ + if (termios->c_iflag & IXON) + efr |= 0x01 << 3; + + /* IXOFF Flag: + * Enable XON/XOFF flow control on input. + * Receiver compares XON1, XOFF1. + */ + if (termios->c_iflag & IXOFF) + efr |= 0x01 << 1; + + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + serial_out(up, UART_LCR, 0x80); + + up->mcr = serial_in(up, UART_MCR); + + /* IXANY Flag: + * Enable any character to restart output. + * Operation resumes after receiving any + * character after recognition of the XOFF character + */ + if (termios->c_iflag & IXANY) + up->mcr |= 1<<5; + + serial_out(up, UART_MCR, up->mcr | 1<<6); + + serial_out(up, UART_LCR, 0xbf); + serial_out(up, UART_TI752_TCR, 0x0f); + /* Enable special char function UARTi.EFR_REG[5] and + * load the new software flow control mode IXON or IXOFF + * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. + */ + serial_out(up, UART_EFR, up->efr | efr | 1<<5); + serial_out(up, UART_LCR, 0x80); + + serial_out(up, UART_MCR, up->mcr & ~(1<<6)); + serial_out(up, UART_LCR, up->lcr); +} + +static void +serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char cval; + unsigned char efr = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); + quot = serial_omap_get_divisor(port, baud); + + if (up->use_dma) + up->fcr = UART_FCR_ENABLE_FIFO + | 0x1 << 6 | 0x1 << 4 + | UART_FCR_DMA_SELECT; + else + up->fcr = UART_FCR_ENABLE_FIFO + | 0x1 << 6 | 0x1 << 4; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * Modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, cval); /* reset DLAB */ + + /*-----------FIFOs and DMA Settings -----------*/ + serial_out(up, UART_LCR, UART_LCR_DLAB); + serial_out(up, UART_DLL, 0); + serial_out(up, UART_DLM, 0); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_LCR, 0xbf); + + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + serial_out(up, UART_LCR, 0x0); /* Access FCR */ + + up->mcr = serial_in(up, UART_MCR); + serial_out(up, UART_MCR, up->mcr | 0x40); /* Access TLR*/ + /* FIFO ENABLE, DMA MODE */ + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, 0xbf); /* Access EFR */ + + if (up->use_dma) { + serial_out(up, UART_TI752_TLR, 0x00); + serial_out(up, UART_OMAP_SCR, ((1 << 6) | (1 << 7))); + } + + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, 0x80); + serial_out(up, UART_MCR, up->mcr); /* Restore TLR */ + + /*-----Protocol, Baud Rate, and Interrupt Settings -- */ + + serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE); + + serial_out(up, UART_LCR, 0xbf); /* Access EFR */ + + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, 0); + serial_out(up, UART_LCR, 0xbf); + + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, 0xbf); /* Access EFR */ + + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, cval); + + if (baud > 230400 && baud != 3000000) + serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X); + else + serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X); + + /* Hardware Flow Control Configuration */ + + if (termios->c_cflag & CRTSCTS) { + efr |= (UART_EFR_CTS | UART_EFR_RTS); + serial_out(up, UART_LCR, 0x80); + + up->mcr = serial_in(up, UART_MCR); + serial_out(up, UART_MCR, up->mcr | 0x40); + + serial_out(up, UART_LCR, 0xbf); /* Access EFR */ + + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_TI752_TCR, 0x0f); + serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */ + serial_out(up, UART_LCR, 0x80); + serial_out(up, UART_MCR, up->mcr | 0x02); + serial_out(up, UART_LCR, cval); + } + + serial_omap_set_mctrl(&up->port, up->port.mctrl); + /* ----Software Flow Control Configuration----- */ + if (termios->c_iflag & (IXON | IXOFF)) + serial_omap_configure_xonxoff(up, termios); + + spin_unlock_irqrestore(&up->port.lock, flags); + dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); + +#ifdef DEBUG + serial_omap_display_reg(port); +#endif +} + +static void +serial_omap_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char efr; + dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); + efr = serial_in(up, UART_EFR); + serial_out(up, UART_LCR, 0xBF); + serial_out(up, UART_EFR, efr | UART_EFR_ECB); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); + serial_out(up, UART_LCR, 0xBF); + serial_out(up, UART_EFR, efr); + serial_out(up, UART_LCR, 0); +} + +static void serial_omap_release_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_release_port+\n"); +} + +static int serial_omap_request_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_request_port+\n"); + return 0; +} + +static void serial_omap_config_port(struct uart_port *port, int flags) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", + up->pdev->id); + up->port.type = PORT_OMAP; +} + +static int +serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + dev_dbg(port->dev, "serial_omap_verify_port+\n"); + return -EINVAL; +} + +static const char * +serial_omap_type(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); + return up->name; +} + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + +static struct uart_omap_port *serial_omap_console_ports[4]; + +static struct uart_driver serial_omap_reg; + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_omap_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + udelay(1); + } + } +} + +static void serial_omap_console_putchar(struct uart_port *port, int ch) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_omap_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_omap_port *up = serial_omap_console_ports[co->index]; + unsigned int ier; + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial_omap_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + check_modem_status(up); +} + +static int __init +serial_omap_console_setup(struct console *co, char *options) +{ + struct uart_omap_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int r; + + if (serial_omap_console_ports[co->index] == NULL) + return -ENODEV; + up = serial_omap_console_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + r = uart_set_options(&up->port, co, baud, parity, bits, flow); + + return r; +} + +static struct console serial_omap_console = { + .name = DEVICE_NAME, + .write = serial_omap_console_write, + .device = uart_console_device, + .setup = serial_omap_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_omap_reg, +}; + +static void serial_omap_add_console_port(struct uart_omap_port *up) +{ + serial_omap_console_ports[up->pdev->id - 1] = up; +} + +#define OMAP_CONSOLE (&serial_omap_console) + +#else + +#define OMAP_CONSOLE NULL + +static inline void serial_omap_add_console_port(struct uart_omap_port *up) {} + +#endif + +struct uart_ops serial_omap_pops = { + .tx_empty = serial_omap_tx_empty, + .set_mctrl = serial_omap_set_mctrl, + .get_mctrl = serial_omap_get_mctrl, + .stop_tx = serial_omap_stop_tx, + .start_tx = serial_omap_start_tx, + .stop_rx = serial_omap_stop_rx, + .enable_ms = serial_omap_enable_ms, + .break_ctl = serial_omap_break_ctl, + .startup = serial_omap_startup, + .shutdown = serial_omap_shutdown, + .set_termios = serial_omap_set_termios, + .pm = serial_omap_pm, + .type = serial_omap_type, + .release_port = serial_omap_release_port, + .request_port = serial_omap_request_port, + .config_port = serial_omap_config_port, + .verify_port = serial_omap_verify_port, +}; + +static struct uart_driver serial_omap_reg = { + .owner = THIS_MODULE, + .driver_name = "OMAP-SERIAL", + .dev_name = DEVICE_NAME, + .major = TTY_MAJOR, + .minor = 64, + .nr = OMAP_MAX_NR_PORTS, + .cons = OMAP_CONSOLE, +}; + +static +int serial_omap_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct uart_omap_port *up = platform_get_drvdata(pdev); + + if (up) + uart_suspend_port(&serial_omap_reg, &up->port); + return 0; +} + +static int serial_omap_resume(struct platform_device *dev) +{ + struct uart_omap_port *up = platform_get_drvdata(dev); + if (up) + uart_resume_port(&serial_omap_reg, &up->port); + return 0; +} + +static void serial_omap_rx_timeout(unsigned long uart_no) +{ + struct uart_omap_port *up = ui[uart_no - 1]; + unsigned int curr_dma_pos; + curr_dma_pos = omap_readl(OMAP34XX_DMA4_BASE + + OMAP_DMA4_CDAC(up->uart_dma.rx_dma_channel)); + if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || + (curr_dma_pos == 0)) { + if (jiffies_to_msecs(jiffies - up->port_activity) < + RX_TIMEOUT) { + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + } else { + serial_omap_stop_rxdma(up); + up->ier |= UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + } + return; + } else { + unsigned int curr_transmitted_size = curr_dma_pos - + up->uart_dma.prev_rx_dma_pos; + up->port.icount.rx += curr_transmitted_size; + tty_insert_flip_string(up->port.info->port.tty, + up->uart_dma.rx_buf + + (up->uart_dma.prev_rx_dma_pos - + up->uart_dma.rx_buf_dma_phys), + curr_transmitted_size); + tty_flip_buffer_push(up->port.info->port.tty); + up->uart_dma.prev_rx_dma_pos = curr_dma_pos; + if (up->uart_dma.rx_buf_size + + up->uart_dma.rx_buf_dma_phys == curr_dma_pos) + serial_omap_start_rxdma(up); + else + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + up->port_activity = jiffies; + } +} + +static void uart_rx_dma_callback(int lch, u16 ch_status, void *data) +{ + return; +} + +static void serial_omap_start_rxdma(struct uart_omap_port *up) +{ + if (up->uart_dma.rx_dma_channel == 0xFF) { + omap_request_dma(up->uart_dma.uart_dma_rx, "UART Rx DMA", + (void *)uart_rx_dma_callback, up, + &(up->uart_dma.rx_dma_channel)); + + omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, + up->uart_dma.rx_buf_dma_phys, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.rx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_rx, 0); + } + up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys; + omap_writel(0, OMAP34XX_DMA4_BASE + + OMAP_DMA4_CDAC(up->uart_dma.rx_dma_channel)); + omap_start_dma(up->uart_dma.rx_dma_channel); + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + up->uart_dma.rx_dma_state = 1; +} + +static void serial_omap_continue_tx(struct uart_omap_port *up) +{ + struct circ_buf *xmit = &up->port.info->xmit; + int start = up->uart_dma.tx_buf_dma_phys + + (xmit->tail & (UART_XMIT_SIZE - 1)); + if (uart_circ_empty(xmit)) + return; + + up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); + /* It is a circular buffer. See if the buffer has wounded back. + * If yes it will have to be transferred in two separate dma + * transfers + */ + if (start + up->uart_dma.tx_buf_size >= + up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) + up->uart_dma.tx_buf_size = + (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start; + omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, start, 0, 0); + + omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.tx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_tx, 0); + + omap_start_dma(up->uart_dma.tx_dma_channel); +} + +static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) +{ + struct uart_omap_port *up = (struct uart_omap_port *)data; + struct circ_buf *xmit = &up->port.info->xmit; + xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \ + (UART_XMIT_SIZE - 1); + up->port.icount.tx += up->uart_dma.tx_buf_size; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) { + spin_lock(&(up->uart_dma.tx_lock)); + serial_omap_stop_tx(&up->port); + up->uart_dma.tx_dma_state = 0; + spin_unlock(&(up->uart_dma.tx_lock)); + } else { + omap_stop_dma(up->uart_dma.tx_dma_channel); + serial_omap_continue_tx(up); + } + up->port_activity = jiffies; + return; +} + +static int serial_omap_probe(struct platform_device *pdev) +{ + struct uart_omap_port *up; + struct resource *mem, *irq, *dma_tx, *dma_rx; + struct uart_dma_info *up_dma = pdev->dev.platform_data; + int ret = -ENOSPC; + char str[7]; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "no mem resource?\n"); + return -ENODEV; + } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(&pdev->dev, "no irq resource?\n"); + return -ENODEV; + } + + ret = (int) request_mem_region(mem->start, (mem->end - mem->start) + 1, + pdev->dev.driver->name); + if (!ret) { + dev_err(&pdev->dev, "memory region already claimed\n"); + return -EBUSY; + } + + dma_tx = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!dma_tx) { + ret = -EINVAL; + goto err; + } + + dma_rx = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (!dma_rx) { + ret = -EINVAL; + goto err; + } + + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (up == NULL) { + ret = -ENOMEM; + goto do_release_region; + } + sprintf(up->name, "OMAP UART%d", pdev->id); + up->pdev = pdev; + up->port.dev = &pdev->dev; + up->port.type = PORT_OMAP; + up->port.iotype = UPIO_MEM; + up->port.mapbase = mem->start; + up->port.irq = irq->start; + + up->uart_dma.uart_dma_tx = dma_tx->start; + up->uart_dma.uart_dma_rx = dma_rx->start; + up->uart_dma.uart_base = mem->start; + + up->port.fifosize = 64; + up->port.ops = &serial_omap_pops; + up->port.line = pdev->id - 1; + if ((pdev->id - 1) == QUART) { + up->port.membase = ioremap_nocache(mem->start, 0x16 << 1); + up->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + up->port.uartclk = QUART_CLK; + up->port.regshift = 1; + } else { + up->port.membase = (void *) OMAP2_IO_ADDRESS(mem->start); + up->port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + up->port.uartclk = UART_CLK; + up->port.regshift = 2; + } + + if (up_dma->dma_enabled) { + up->use_dma = 1; + up->uart_dma.rx_buf_size = up_dma->rx_dma_bufsize; + up->uart_dma.rx_timeout = up_dma->rx_timeout; + } + + if (up->use_dma) { + spin_lock_init(&(up->uart_dma.tx_lock)); + spin_lock_init(&(up->uart_dma.rx_lock)); + up->uart_dma.tx_dma_channel = 0xFF; + up->uart_dma.rx_dma_channel = 0xFF; + } + if (console_detect(str)) { + pr_err("\n %s: Invalid console paramter...\n", __func__); + pr_err("\n %s: UART Driver Init Failed!\n", __func__); + return -EPERM; + } + ui[pdev->id - 1] = up; + serial_omap_add_console_port(up); + + ret = uart_add_one_port(&serial_omap_reg, &up->port); + if (ret != 0) + goto do_release_region; + + platform_set_drvdata(pdev, up); + return 0; +err: + dev_err(&pdev->dev, "[UART%d]: failure [%s]\n", + pdev->id, __func__); +do_release_region: + release_mem_region(mem->start, (mem->end - mem->start) + 1); + return ret; +} + +static int serial_omap_remove(struct platform_device *dev) +{ + struct uart_omap_port *up = platform_get_drvdata(dev); + platform_set_drvdata(dev, NULL); + if (up) { + uart_remove_one_port(&serial_omap_reg, &up->port); + kfree(up); + } + return 0; +} + +static struct platform_driver serial_omap_driver = { + .probe = serial_omap_probe, + .remove = serial_omap_remove, + + .suspend = serial_omap_suspend, + .resume = serial_omap_resume, + .driver = { + .name = "omap-uart", + }, +}; + +int __init serial_omap_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_omap_reg); + if (ret != 0) + return ret; + ret = platform_driver_register(&serial_omap_driver); + if (ret != 0) + uart_unregister_driver(&serial_omap_reg); + return ret; +} + +void __exit serial_omap_exit(void) +{ + platform_driver_unregister(&serial_omap_driver); + uart_unregister_driver(&serial_omap_reg); +} + +#ifdef CONFIG_PM +static void omap_uart_save_context(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + struct uart_omap_port *up = ui[num]; + + u16 lcr = 0; + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, 0xBF); + uart->dll = serial_in(up, UART_DLL); + uart->dlh = serial_in(up, UART_DLM); + serial_out(up, UART_LCR, lcr); + uart->ier = serial_in(up, UART_IER); + uart->sysc = serial_in(up, UART_OMAP_SYSC); + uart->scr = serial_in(up, UART_OMAP_SCR); + uart->wer = serial_in(up, UART_OMAP_WER); + + uart->context_valid = 1; +} + +static void omap_uart_restore_context(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + struct uart_omap_port *up = ui[num]; + u16 efr = 0; + + if (!uart->context_valid) + return; + + uart->context_valid = 0; + + serial_out(up, UART_OMAP_MDR1, 0x7); + serial_out(up, UART_LCR, 0xBF); /* Config B mode */ + efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, 0x0); + serial_out(up, UART_LCR, 0xBF); /* Config B mode */ + serial_out(up, UART_DLL, uart->dll); + serial_out(up, UART_DLM, uart->dlh); + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, uart->ier); + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, 0xBF); /* Config B mode */ + serial_out(up, UART_EFR, efr); + serial_out(up, UART_LCR, UART_LCR_WLEN8); + serial_out(up, UART_OMAP_SCR, uart->scr); + serial_out(up, UART_OMAP_WER, uart->wer); + serial_out(up, UART_OMAP_SYSC, uart->sysc | (0x2 << 3)); + serial_out(up, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ +} + +/* Remove this during /mach-omap2/serial.c cleanup for 8250 support */ +void omap_uart_enable_irqs(int enable) {} + +static inline void omap_uart_disable_clocks(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + if (!uart->clocked) + return; + + omap_uart_save_context(num); + uart->clocked = 0; + clk_disable(uart->ick); + clk_disable(uart->fck); +} + +void omap_uart_enable_wakeup(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + +static void omap_uart_smart_idle_enable(int num, int enable) +{ + struct uart_omap_port *up = ui[num]; + u16 sysc; + + sysc = serial_in(up, UART_OMAP_SYSC) & 0x7; + + if (enable) + /* Errata 2.15: Force idle if in DMA mode */ + sysc |= up->use_dma ? 0x0 : (0x2 << 3); + else + sysc |= 0x1 << 3; + + serial_out(up, UART_OMAP_SYSC, sysc); +} + +static void omap_uart_block_sleep(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + + omap_uart_enable_clocks(num); + + omap_uart_smart_idle_enable(num, 0); + uart->can_sleep = 0; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); +} + +static void omap_uart_allow_sleep(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + if (!uart->clocked) + return; + + if (uart->padconf) + omap_uart_enable_wakeup(num); + + omap_uart_smart_idle_enable(num, 1); + uart->can_sleep = 1; + + if (uart->timeout) + del_timer_sync(&uart->timer); +} + +void omap_uart_prepare_idle(int num) +{ + omap_uart_disable_clocks(num); +} + +void omap_uart_resume_idle(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + + omap_uart_enable_clocks(num); + + /* Check for IO pad wakeup */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 p = omap_ctrl_readw(uart->padconf); + + if (p & OMAP3_PADCONF_WAKEUPEVENT0) + omap_uart_block_sleep(num); + } + + /* Check for normal UART wakeup */ + if (__raw_readl(uart->wk_st) & uart->wk_mask) + omap_uart_block_sleep(num); +} + +void omap_uart_prepare_suspend(void) +{ + int j; + for (j = 0; j < OMAP_MAX_NR_PORTS; j++) + omap_uart_allow_sleep(j); +} + +int omap_uart_can_sleep(void) +{ + int can_sleep = 1; + int j; + + for (j = 0; j < OMAP_MAX_NR_PORTS; j++) { + struct omap_uart_state *uart = &omap_uart[j]; + + if (!uart->clocked) + continue; + + if (!uart->can_sleep) { + can_sleep = 0; + continue; + } + + omap_uart_allow_sleep(j); + } + return can_sleep; +} + +static void omap_uart_init_wakeup_source(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + + if (cpu_is_omap34xx()) { + u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD; + u32 wk_mask = 0; + u32 padconf = 0; + + uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1); + uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1); + switch (uart->num) { + case 0: + wk_mask = OMAP3430_ST_UART1_MASK; + padconf = 0x182; + break; + case 1: + wk_mask = OMAP3430_ST_UART2_MASK; + padconf = 0x17a; + break; + case 2: + wk_mask = OMAP3430_ST_UART3_MASK; + padconf = 0x19e; + break; + } + uart->wk_mask = wk_mask; + uart->padconf = padconf; + } else if (cpu_is_omap24xx()) { + u32 wk_mask = 0; + + if (cpu_is_omap2430()) { + uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1); + } else if (cpu_is_omap2420()) { + uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1); + } + switch (uart->num) { + case 0: + wk_mask = OMAP24XX_ST_UART1_MASK; + break; + case 1: + wk_mask = OMAP24XX_ST_UART2_MASK; + break; + case 2: + wk_mask = OMAP24XX_ST_UART3_MASK; + break; + } + uart->wk_mask = wk_mask; + } else { + uart->wk_en = 0; + uart->wk_st = 0; + uart->wk_mask = 0; + uart->padconf = 0; + } +} + +static void omap_uart_idle_timer(unsigned long data) +{ + + struct omap_uart_state *uart = (struct omap_uart_state *)data; + struct uart_omap_port *up = ui[uart->num]; + + if (up->use_dma && (up->uart_dma.tx_dma_channel != 0xFF + || up->uart_dma.rx_dma_channel != 0xFF)) { + omap_uart_block_sleep(uart->num); + return; + } + + omap_uart_allow_sleep(uart->num); +} + +void omap_uart_idle_init(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + + uart->can_sleep = 0; + uart->timeout = SLEEP_TIMEOUT; + setup_timer(&uart->timer, omap_uart_idle_timer, + (unsigned long) uart); + + mod_timer(&uart->timer, jiffies + uart->timeout); + + omap_uart_init_wakeup_source(num); +} + +#else +static inline void omap_uart_restore_context(int num) {} +static inline void omap_uart_block_sleep(int num) {} +static void omap_uart_smart_idle_enable(int num, int enable) {} +#endif /* CONFIG_PM */ + +static inline void omap_uart_enable_clocks(int num) +{ + struct omap_uart_state *uart = &omap_uart[num]; + if (uart->clocked) + return; + + clk_enable(uart->ick); + clk_enable(uart->fck); + uart->clocked = 1; + omap_uart_restore_context(num); +} + +void __init omap_serial_early_init() +{ + int i; + char name[16]; + + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + struct omap_uart_state *uart = &omap_uart[i]; + sprintf(name, "uart%d_ick", i+1); + uart->ick = clk_get(NULL, name); + + if (IS_ERR(uart->ick)) { + printk(KERN_ERR "Could not get uart%d_ick\n", i+1); + uart->ick = NULL; + } + + sprintf(name, "uart%d_fck", i+1); + uart->fck = clk_get(NULL, name); + + if (IS_ERR(uart->fck)) { + printk(KERN_ERR "Could not get uart%d_fck\n", i+1); + uart->fck = NULL; + } + + uart->num = i; + omap_uart_enable_clocks(i); + } +} + +#ifdef DEBUG +#define UART_OMAP_SPR 0x07 /* Scratchpad register */ +static void serial_omap_display_reg(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned int lcr, efr, mcr, dll, dlh, xon1, xon2, xoff1, xoff2; + unsigned int tcr, tlr, uasr; + pr_debug("Register dump for UART%d\n", up->pdev->id); + pr_debug("IER_REG = 0x%x\n", serial_in(up, UART_IER)); + pr_debug("IIR_REG = 0x%x\n", serial_in(up, UART_IIR)); + lcr = serial_in(up, UART_LCR); + pr_debug("LCR_REG = 0x%x\n", lcr); + mcr = serial_in(up, UART_MCR); + pr_debug("MCR_REG = 0x%x\n", mcr); + pr_debug("LSR_REG = 0x%x\n", serial_in(up, UART_LSR)); + pr_debug("MSR_REG = 0x%x\n", serial_in(up, UART_MSR)); + pr_debug("SPR_REG = 0x%x\n", serial_in(up, UART_OMAP_SPR)); + pr_debug("MDR1_REG = 0x%x\n", serial_in(up, UART_OMAP_MDR1)); + pr_debug("MDR2_REG = 0x%x\n", serial_in(up, UART_OMAP_MDR2)); + pr_debug("SCR_REG = 0x%x\n", serial_in(up, UART_OMAP_SCR)); + pr_debug("SSR_REG = 0x%x\n", serial_in(up, UART_OMAP_SSR)); + pr_debug("MVR_REG = 0x%x\n", serial_in(up, UART_OMAP_MVER)); + pr_debug("SYSC_REG = 0x%x\n", serial_in(up, UART_OMAP_SYSC)); + pr_debug("SYSS_REG = 0x%x\n", serial_in(up, UART_OMAP_SYSS)); + pr_debug("WER_REG = 0x%x\n", serial_in(up, UART_OMAP_WER)); + + serial_out(up, UART_LCR, 0xBF); + dll = serial_in(up, UART_DLL); + dlh = serial_in(up, UART_DLM); + efr = serial_in(up, UART_EFR); + xon1 = serial_in(up, UART_XON1); + xon2 = serial_in(up, UART_XON2); + + serial_out(up, UART_EFR, efr | UART_EFR_ECB); + serial_out(up, UART_LCR, lcr); + serial_out(up, UART_MCR, mcr | UART_MCR_TCRTLR); + serial_out(up, UART_LCR, 0xBF); + + tcr = serial_in(up, UART_TI752_TCR); + tlr = serial_in(up, UART_TI752_TLR); + + serial_out(up, UART_LCR, lcr); + serial_out(up, UART_MCR, mcr); + serial_out(up, UART_LCR, 0xBF); + + xoff1 = serial_in(up, UART_XOFF1); + xoff2 = serial_in(up, UART_XOFF2); + uasr = serial_in(up, UART_OMAP_UASR); + + serial_out(up, UART_EFR, efr); + serial_out(up, UART_LCR, lcr); + + pr_debug("DLL_REG = 0x%x\n", dll); + pr_debug("DLH_REG = 0x%x\n", dlh); + pr_debug("EFR_REG = 0x%x\n", efr); + + pr_debug("XON1_ADDR_REG = 0x%x\n", xon1); + pr_debug("XON2_ADDR_REG = 0x%x\n", xon2); + pr_debug("TCR_REG = 0x%x\n", tcr); + pr_debug("TLR_REG = 0x%x\n", tlr); + + pr_debug("XOFF1_REG = 0x%x\n", xoff1); + pr_debug("XOFF2_REG = 0x%x\n", xoff2); + pr_debug("UASR_REG = 0x%x\n", uasr); +} +#endif /* DEBUG */ + +subsys_initcall(serial_omap_init); +module_exit(serial_omap_exit); + +MODULE_DESCRIPTION("OMAP High Speed UART driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("Texas Instruments Inc"); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/