Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752083AbZIXEfU (ORCPT ); Thu, 24 Sep 2009 00:35:20 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751174AbZIXEfR (ORCPT ); Thu, 24 Sep 2009 00:35:17 -0400 Received: from smtp102.sbc.mail.mud.yahoo.com ([68.142.198.201]:43515 "HELO smtp102.sbc.mail.mud.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1750794AbZIXEfM (ORCPT ); Thu, 24 Sep 2009 00:35:12 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=sbcglobal.net; h=Received:X-YMail-OSG:X-Yahoo-Newman-Property:Date:From:To:Cc:Subject:Message-Id:In-Reply-To:References:Reply-To:X-Mailer:Mime-Version:Content-Type:Content-Transfer-Encoding; b=IpdWJ+m+y/1VDybk+AFnzQhRyox6H5aqa8Slf4EInxIHbBzUHGBMHHR6/UpzQoxR1OGnIcOpIvIYktJDpvDVYEk2hmyw1VGn5FP4egJyXhTPx/YtZq3Fd2pF4bhy7zkeY07cgOpsBBJV8+xsRFxb5xZgJhuzcRLHugGqs9HdTyo= ; X-YMail-OSG: mWCOoVUVM1mGOPfvukth0cQ1q7nVvl3v2EBtg5ZdKTsIFxXSSrb5w4Kp1BPa62FFc6h1oGgSp8S3UNVnkWsQXaabXor9mgnUB2pGMkDM3RxKwj1XxVul1pBS22z6q3OVLfajR6_1QKj9ZHGVwnCXxX8AVUGehCW.NGmVHfitOuIi4_mmXXF9FRR1YHICeFiyhw5TgDshTdpRnazbiOJfGn0_VovE2U9RA3XgpdWzW1Uq6Xc.pnMzTIYgaF4gtONJ3OZ7TKcUJbMUp43fKUQ4agJ6BPgJ2zF_r6i9MhxzcYTa3ur13Oof4JjJxxOtxnJo9OQIt..TqQlkoTHJ X-Yahoo-Newman-Property: ymail-3 Date: Wed, 23 Sep 2009 23:35:05 -0500 From: Will To: Robert Hancock Cc: linux-kernel@vger.kernel.org Subject: Re: disk speed regression kernel 2.6.29 and after Message-Id: <20090923233505.a567667b.whansard@sbcglobal.net> In-Reply-To: <4ABAE271.80309@gmail.com> References: <4ABA0FDA.9090707@sbcglobal.net> <4ABAE271.80309@gmail.com> Reply-To: whansard@sbcglobal.net X-Mailer: Sylpheed 2.5.0 (GTK+ 2.10.13; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 51480 Lines: 1085 On Wed, 23 Sep 2009 21:07:29 -0600 Robert Hancock wrote: > On 09/23/2009 06:08 AM, will wrote: > > I had been using an old 2.6.22 kernel on my machine, and I often backup > > one partition of my main hard drive to a partition on a second hard > > drive. The main hard drive is sata 640 gigs, and the second is a pata > > 320 gig. copying this partition from one drive to the other with dd > > takes about 3 minutes and 30 seconds. When I installed kernel 2.6.30, > > and 2.6.31, the time took 9 minutes and 20 seconds. I decided to go to > > the trouble of compiling all the kernels between, and kernels > > 2.6.22-2.6.28 all do the operation in about 3 minutes and 30 seconds. > > 2.6.29- newer all take about 9 minutes and 20 seconds. The partition is > > 16 gigs. each drive seems to be as fast as before otherwise, it's just > > much slower copying from one drive to another, which I do very often. > > This is an nforce 3 based motherboard, amd southbridge, i think, with 4 > > gigs of ram, athlon 64x2. 32 bit kernel. has anyone heard of this problem? > > I currently have 3 hard drives hooked up. > > a 200 gig on a promise controller, > > a 320 gig on the amd pata? > > a 640 sata on the nv i think. > > The motherboard is a Asrock-AM2NF3-VSTA > > copying this partition with dd or cat or schily's dd between any of these 3 > > different hard drives takes different times depending on the speed of > > the drive with > > kernels 2.6.22-2.6.28, but takes about 9 minutes and 30 seconds on any > > of the drives > > with the kernels 2.6.29 and after. > > Please cc me with any followups or anything. thanks. > > Can you post the dmesg output from bootup on both the good and bad kernels? good Linux version 2.6.28-04985-gebdab07 (root@Wil.com) (gcc version 4.4.1 (GCC) ) #14 SMP Wed Sep 23 21:12:50 CDT 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000ebfb0000 (usable) BIOS-e820: 00000000ebfb0000 - 00000000ebfc0000 (ACPI data) BIOS-e820: 00000000ebfc0000 - 00000000ebff0000 (ACPI NVS) BIOS-e820: 00000000ebff0000 - 00000000ec000000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000114000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0xebfb0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 377fe000 @ 10000-16000 ACPI: RSDP 000F9910, 0014 (r0 ACPIAM) ACPI: RSDT EBFB0000, 0034 (r1 A M I OEMRSDT 1000808 MSFT 97) ACPI: FACP EBFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97) ACPI: DSDT EBFB0400, 3D56 (r1 M2N3V M2N3V234 234 INTL 2002026) ACPI: FACS EBFC0000, 0040 ACPI: APIC EBFB0390, 006C (r1 A M I OEMAPIC 1000808 MSFT 97) ACPI: OEMB EBFC0040, 0056 (r1 A M I AMI_OEM 1000808 MSFT 97) ACPI: SSDT EBFB4160, 0248 (r1 A M I POWERNOW 1 AMD 1) ACPI: Local APIC address 0xfee00000 2887MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00006e88f4] TEXT DATA BSS ==> [0000100000 - 00006e88f4] #4 [00006e9000 - 00006ec000] INIT_PG_TABLE ==> [00006e9000 - 00006ec000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000ebfb0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000ebfb0 On node 0 totalpages: 966463 free_area_init_node: node 0, pgdat c0643940, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 5776 pages used for memmap HighMem zone: 733474 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs Allocating PCI resources starting at ee000000 (gap: ec000000:13000000) PERCPU: Allocating 32768 bytes of per cpu data NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 958911 Kernel command line: BOOT_IMAGE=Linux ro root=805 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2736.863 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x30 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3827692k/3866304k available (4150k kernel code, 37220k reserved, 1329k data, 284k init, 2957000k highmem) virtual kernel memory layout: fixmap : 0xfff9f000 - 0xfffff000 ( 384 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0661000 - 0xc06a8000 ( 284 kB) .data : 0xc050d96b - 0xc0659e60 (1329 kB) .text : 0xc0100000 - 0xc050d96b (4150 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 5473.72 BogoMIPS (lpj=2736863) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using C1E aware idle routine Checking 'hlt' instruction... OK. ACPI: Core revision 20080926 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2400 stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5472.99 BogoMIPS (lpj=2736496) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) X2 Dual Core Processor BE-2400 stepping 02 Brought up 2 CPUs Total of 2 processors activated (10946.71 BogoMIPS). net_namespace: 684 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xec000000-0xefffffff] pci 0000:00:01.1: reg 10 io port: [0x5080-0x509f] pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f] pci 0000:00:01.1: reg 24 io port: [0x5040-0x507f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xfcffd000-0xfcffdfff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xfcffe000-0xfcffefff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:02.2: reg 10 32bit mmio: [0xfcfffc00-0xfcfffcff] pci 0000:00:02.2: supports D1 D2 pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.2: PME# disabled pci 0000:00:05.0: reg 10 32bit mmio: [0xfcffc000-0xfcffcfff] pci 0000:00:05.0: reg 14 io port: [0xdc00-0xdc07] pci 0000:00:05.0: supports D1 D2 pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:08.0: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:0a.0: reg 10 io port: [0xf80-0xf87] pci 0000:00:0a.0: reg 14 io port: [0xf00-0xf03] pci 0000:00:0a.0: reg 18 io port: [0xe80-0xe87] pci 0000:00:0a.0: reg 1c io port: [0xe00-0xe03] pci 0000:00:0a.0: reg 20 io port: [0xd000-0xd00f] pci 0000:00:0a.0: reg 24 io port: [0xc800-0xc87f] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff] pci 0000:00:0b.0: bridge 32bit mmio: [0xfd000000-0xfeafffff] pci 0000:00:0b.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] pci 0000:02:07.0: reg 10 32bit mmio: [0xfebf8000-0xfebfffff] pci 0000:02:07.0: supports D2 pci 0000:02:08.0: reg 10 io port: [0xec00-0xec07] pci 0000:02:08.0: reg 14 io port: [0xe880-0xe883] pci 0000:02:08.0: reg 18 io port: [0xe800-0xe807] pci 0000:02:08.0: reg 1c io port: [0xe480-0xe483] pci 0000:02:08.0: reg 20 io port: [0xe400-0xe40f] pci 0000:02:08.0: reg 24 32bit mmio: [0xfebf4000-0xfebf7fff] pci 0000:02:08.0: reg 30 32bit mmio: [0xfebe0000-0xfebe3fff] pci 0000:02:08.0: supports D1 pci 0000:00:0e.0: bridge io port: [0xe000-0xefff] pci 0000:00:0e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *3 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *5 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11 ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10 ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14 ACPI: Power Resource [ISAV] (on) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 26, should be 21 [20080926] SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing NET: Registered protocol family 8 NET: Registered protocol family 20 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:06: ioport range 0x4d0-0x4d1 has been reserved system 00:06: ioport range 0x4000-0x407f has been reserved system 00:06: ioport range 0x4080-0x40ff has been reserved system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved system 00:07: iomem range 0xff380000-0xffffffff has been reserved system 00:0b: ioport range 0x290-0x29f has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff could not be reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0xebffffff could not be reserved pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: 0xfd000000-0xfeafffff pci 0000:00:0b.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0e.0: IO window: 0xe000-0xefff pci 0000:00:0e.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:0e.0: PREFETCH window: disabled pci 0000:00:0e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0xfd000000-0xfeafffff] bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0xe000-0xefff] bus: 02 index 1 mmio: [0xfeb00000-0xfebfffff] bus: 02 index 2 mmio: [0x0-0x0] bus: 02 index 3 mmio: [0x0-0x0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 cpufreq: No nForce2 chipset. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.10) JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with security attributes, no debug enabled OCFS2 1.5.0 OCFS2 Node Manager 1.5.0 msgmni has been set to 1702 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 lp: driver loaded but no devices found Linux agpgart interface v0.103 agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xec000000 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:05: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). floppy0: no floppy controllers found loop: module loaded forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22 alloc irq_2_pin on cpu 0 node 0 forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:05.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:49:5f:99 forcedeth 0000:00:05.0: csum timirq lnktim desc-v2 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver amd74xx 0000:00:08.0: UDMA133 controller amd74xx 0000:00:08.0: IDE controller (0x10de:0x00e5 rev 0xa2) pci 0000:00:08.0: power state changed by ACPI to D0 amd74xx 0000:00:08.0: BIOS didn't set cable bits correctly. Enabling workaround. amd74xx 0000:00:08.0: BIOS didn't set cable bits correctly. Enabling workaround. amd74xx 0000:00:08.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7 ide1: BM-DMA at 0xffa8-0xffaf Probing IDE interface ide0... hda: MAXTOR STM3320620A, ATA DISK drive hdb: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/33 mode selected Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive hdd: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdd: UDMA/66 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 pdc202xx_new 0000:02:08.0: IDE controller (0x105a:0x4d68 rev 0x02) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 vendor=10de device=00ed alloc irq_2_pin on cpu 0 node 0 pci 0000:02:08.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19 pdc202xx_new 0000:02:08.0: PLL input clock is 16641 kHz pdc202xx_new 0000:02:08.0: 100% native mode on irq 19 ide2: BM-DMA at 0xe400-0xe407 ide3: BM-DMA at 0xe408-0xe40f Probing IDE interface ide2... Probing IDE interface ide3... ide2 at 0xec00-0xec07,0xe882 on irq 19 ide3 at 0xe800-0xe807,0xe482 on irq 19 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 512KiB hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > ide-cd driver 5.00 ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache ide-cd: hdd: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache Driver 'sd' needs updating - please use bus_type methods sata_nv 0000:00:0a.0: version 3.5 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 alloc irq_2_pin on cpu 0 node 0 sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:0a.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xd000 irq 21 ata2: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xd008 irq 21 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-8: ST3640323AS, CC1F, max UDMA/133 ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3640323AS CC1F PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder Advanced Linux Sound Architecture Driver Version 1.0.18a. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18 vendor=10de device=00ed alloc irq_2_pin on cpu 0 node 0 Yamaha DS-1 PCI 0000:02:07.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18 Yamaha DS-1 PCI 0000:02:07.0: firmware: using built-in firmware yamaha/ds1_dsp.fw Yamaha DS-1 PCI 0000:02:07.0: firmware: using built-in firmware yamaha/ds1e_ctrl.fw input: AT Translated Set 2 keyboard as /class/input/input0 ALSA device list: #0: Yamaha DS-1 (YMF724F) at 0xfebf8000, irq 18 IPv4 over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2400 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xf (2300 MHz), vid 0xe powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xf powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x11 powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x13 powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x16 Using IPI No-Shortcut mode rtc_cmos 00:02: setting system clock to 2009-09-23 22:58:36 UTC (1253746716) input: ImPS/2 Generic Wheel Mouse as /class/input/input1 ReiserFS: sda5: found reiserfs format "3.6" with standard journal ReiserFS: sda5: using ordered data mode ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda5: checking transaction log (sda5) ReiserFS: sda5: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 284k freed ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: sda5: warning: vs-500: unknown uniqueness -107167201[18060 33348 0xf6c5325c UNKNOWN] not found ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: sda5: warning: vs-500: unknown uniqueness -107167201[18060 113891 0xf6c55758 UNKNOWN] not found ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: sda5: warning: vs-500: unknown uniqueness -107167201[117144 365484 0xf6c56188 UNKNOWN] not found ip_tables: (C) 2000-2006 Netfilter Core Team hdb: UDMA/33 mode selected ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x3c/0x50() Hardware name: To Be Filled By O.E.M. sysfs: duplicate filename 'audio' can not be created Modules linked in: sound(+) ipt_LOG ip_tables x_tables Pid: 1666, comm: modprobe Not tainted 2.6.28-04985-gebdab07 #14 Call Trace: [] warn_slowpath+0x82/0xc0 [] schedule+0x21e/0x780 [] xapic_wait_icr_idle+0x17/0x20 [] idr_get_empty_slot+0xe4/0x260 [] ida_get_new_above+0x79/0x1b0 [] sysfs_ilookup_test+0x0/0x10 [] sysfs_find_dirent+0x21/0x30 [] __sysfs_add_one+0x1d/0xe0 [] ilookup5+0x36/0x40 [] sysfs_add_one+0x3c/0x50 [] create_dir+0x48/0x90 [] sysfs_create_dir+0x29/0x40 [] kobject_get+0xf/0x20 [] kobject_add_internal+0x83/0x1d0 [] kobject_set_name_vargs+0x3a/0x50 [] kobject_add_varg+0x1e/0x60 [] kobject_add+0x2d/0x60 [] kobject_get+0xf/0x20 [] device_add+0xca/0x600 [] kobject_init+0x25/0xa0 [] device_create_vargs+0x8b/0xd0 [] device_create+0x2b/0x30 [] oss_init+0xa5/0x149 [sound] [] do_one_initcall+0x33/0x170 [] oss_init+0x0/0x149 [sound] [] sys_init_module+0x8b/0x1b0 [] sys_close+0x58/0x90 [] syscall_call+0x7/0xb ---[ end trace c45370bb6aa94452 ]--- kobject_add_internal failed for audio with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1666, comm: modprobe Tainted: G W 2.6.28-04985-gebdab07 #14 Call Trace: [] kobject_add_internal+0x132/0x1d0 [] kobject_add+0x2d/0x60 [] kobject_get+0xf/0x20 [] device_add+0xca/0x600 [] kobject_init+0x25/0xa0 [] device_create_vargs+0x8b/0xd0 [] device_create+0x2b/0x30 [] oss_init+0xa5/0x149 [sound] [] do_one_initcall+0x33/0x170 [] oss_init+0x0/0x149 [sound] [] sys_init_module+0x8b/0x1b0 [] sys_close+0x58/0x90 [] syscall_call+0x7/0xb hdc: UDMA/33 mode selected Driver 'sr' needs updating - please use bus_type methods hdd: UDMA/66 mode selected ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: sda5: warning: vs-500: unknown uniqueness -107167201[117144 365494 0xf6ca87d8 UNKNOWN] not found w83627ehf: Found W83627EHG chip at 0x290 warning: process `update' used the obsolete bdflush system call Fix your initscripts? warning: process `update' used the obsolete bdflush system call Fix your initscripts? bad Linux version 2.6.28-04986-g295f000 (root@Wil.com) (gcc version 4.4.1 (GCC) ) #13 SMP Wed Sep 23 21:08:03 CDT 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000ebfb0000 (usable) BIOS-e820: 00000000ebfb0000 - 00000000ebfc0000 (ACPI data) BIOS-e820: 00000000ebfc0000 - 00000000ebff0000 (ACPI NVS) BIOS-e820: 00000000ebff0000 - 00000000ec000000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000114000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0xebfb0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 377fe000 @ 10000-16000 ACPI: RSDP 000F9910, 0014 (r0 ACPIAM) ACPI: RSDT EBFB0000, 0034 (r1 A M I OEMRSDT 1000808 MSFT 97) ACPI: FACP EBFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97) ACPI: DSDT EBFB0400, 3D56 (r1 M2N3V M2N3V234 234 INTL 2002026) ACPI: FACS EBFC0000, 0040 ACPI: APIC EBFB0390, 006C (r1 A M I OEMAPIC 1000808 MSFT 97) ACPI: OEMB EBFC0040, 0056 (r1 A M I AMI_OEM 1000808 MSFT 97) ACPI: SSDT EBFB4160, 0248 (r1 A M I POWERNOW 1 AMD 1) ACPI: Local APIC address 0xfee00000 2887MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00006e88f4] TEXT DATA BSS ==> [0000100000 - 00006e88f4] #4 [00006e9000 - 00006ec000] INIT_PG_TABLE ==> [00006e9000 - 00006ec000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000ebfb0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000ebfb0 On node 0 totalpages: 966463 free_area_init_node: node 0, pgdat c0643940, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 5776 pages used for memmap HighMem zone: 733474 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs Allocating PCI resources starting at ee000000 (gap: ec000000:13000000) PERCPU: Allocating 32768 bytes of per cpu data NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 958911 Kernel command line: BOOT_IMAGE=Linux ro root=805 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2737.051 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x30 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3827692k/3866304k available (4150k kernel code, 37220k reserved, 1329k data, 284k init, 2957000k highmem) virtual kernel memory layout: fixmap : 0xfff9f000 - 0xfffff000 ( 384 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0661000 - 0xc06a8000 ( 284 kB) .data : 0xc050d98b - 0xc0659e60 (1329 kB) .text : 0xc0100000 - 0xc050d98b (4150 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 5474.10 BogoMIPS (lpj=2737051) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using C1E aware idle routine Checking 'hlt' instruction... OK. ACPI: Core revision 20080926 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 alloc irq_2_pin on cpu 0 node 0 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2400 stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5472.99 BogoMIPS (lpj=2736496) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) X2 Dual Core Processor BE-2400 stepping 02 Brought up 2 CPUs Total of 2 processors activated (10947.09 BogoMIPS). net_namespace: 684 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xec000000-0xefffffff] pci 0000:00:01.1: reg 10 io port: [0x5080-0x509f] pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f] pci 0000:00:01.1: reg 24 io port: [0x5040-0x507f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xfcffd000-0xfcffdfff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xfcffe000-0xfcffefff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:02.2: reg 10 32bit mmio: [0xfcfffc00-0xfcfffcff] pci 0000:00:02.2: supports D1 D2 pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.2: PME# disabled pci 0000:00:05.0: reg 10 32bit mmio: [0xfcffc000-0xfcffcfff] pci 0000:00:05.0: reg 14 io port: [0xdc00-0xdc07] pci 0000:00:05.0: supports D1 D2 pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:08.0: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:0a.0: reg 10 io port: [0xf80-0xf87] pci 0000:00:0a.0: reg 14 io port: [0xf00-0xf03] pci 0000:00:0a.0: reg 18 io port: [0xe80-0xe87] pci 0000:00:0a.0: reg 1c io port: [0xe00-0xe03] pci 0000:00:0a.0: reg 20 io port: [0xd000-0xd00f] pci 0000:00:0a.0: reg 24 io port: [0xc800-0xc87f] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff] pci 0000:00:0b.0: bridge 32bit mmio: [0xfd000000-0xfeafffff] pci 0000:00:0b.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] pci 0000:02:07.0: reg 10 32bit mmio: [0xfebf8000-0xfebfffff] pci 0000:02:07.0: supports D2 pci 0000:02:08.0: reg 10 io port: [0xec00-0xec07] pci 0000:02:08.0: reg 14 io port: [0xe880-0xe883] pci 0000:02:08.0: reg 18 io port: [0xe800-0xe807] pci 0000:02:08.0: reg 1c io port: [0xe480-0xe483] pci 0000:02:08.0: reg 20 io port: [0xe400-0xe40f] pci 0000:02:08.0: reg 24 32bit mmio: [0xfebf4000-0xfebf7fff] pci 0000:02:08.0: reg 30 32bit mmio: [0xfebe0000-0xfebe3fff] pci 0000:02:08.0: supports D1 pci 0000:00:0e.0: bridge io port: [0xe000-0xefff] pci 0000:00:0e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *3 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *5 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11 ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10 ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14 ACPI: Power Resource [ISAV] (on) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 26, should be 21 [20080926] SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing NET: Registered protocol family 8 NET: Registered protocol family 20 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:06: ioport range 0x4d0-0x4d1 has been reserved system 00:06: ioport range 0x4000-0x407f has been reserved system 00:06: ioport range 0x4080-0x40ff has been reserved system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved system 00:07: iomem range 0xff380000-0xffffffff has been reserved system 00:0b: ioport range 0x290-0x29f has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff could not be reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0xebffffff could not be reserved pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: 0xfd000000-0xfeafffff pci 0000:00:0b.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0e.0: IO window: 0xe000-0xefff pci 0000:00:0e.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:0e.0: PREFETCH window: disabled pci 0000:00:0e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0xfd000000-0xfeafffff] bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0xe000-0xefff] bus: 02 index 1 mmio: [0xfeb00000-0xfebfffff] bus: 02 index 2 mmio: [0x0-0x0] bus: 02 index 3 mmio: [0x0-0x0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 cpufreq: No nForce2 chipset. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.10) JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with security attributes, no debug enabled OCFS2 1.5.0 OCFS2 Node Manager 1.5.0 msgmni has been set to 1702 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 lp: driver loaded but no devices found Linux agpgart interface v0.103 agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xec000000 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:05: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). floppy0: no floppy controllers found loop: module loaded forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22 alloc irq_2_pin on cpu 0 node 0 forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:05.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:49:5f:99 forcedeth 0000:00:05.0: csum timirq lnktim desc-v2 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver amd74xx 0000:00:08.0: UDMA133 controller amd74xx 0000:00:08.0: IDE controller (0x10de:0x00e5 rev 0xa2) pci 0000:00:08.0: power state changed by ACPI to D0 amd74xx 0000:00:08.0: BIOS didn't set cable bits correctly. Enabling workaround. amd74xx 0000:00:08.0: BIOS didn't set cable bits correctly. Enabling workaround. amd74xx 0000:00:08.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7 ide1: BM-DMA at 0xffa8-0xffaf Probing IDE interface ide0... hda: MAXTOR STM3320620A, ATA DISK drive hdb: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/33 mode selected Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive hdd: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdd: UDMA/66 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 pdc202xx_new 0000:02:08.0: IDE controller (0x105a:0x4d68 rev 0x02) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 vendor=10de device=00ed alloc irq_2_pin on cpu 0 node 0 pci 0000:02:08.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19 pdc202xx_new 0000:02:08.0: PLL input clock is 16640 kHz pdc202xx_new 0000:02:08.0: 100% native mode on irq 19 ide2: BM-DMA at 0xe400-0xe407 ide3: BM-DMA at 0xe408-0xe40f Probing IDE interface ide2... Probing IDE interface ide3... ide2 at 0xec00-0xec07,0xe882 on irq 19 ide3 at 0xe800-0xe807,0xe482 on irq 19 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 512KiB hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > ide-cd driver 5.00 ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache ide-cd: hdd: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache Driver 'sd' needs updating - please use bus_type methods sata_nv 0000:00:0a.0: version 3.5 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 alloc irq_2_pin on cpu 0 node 0 sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:0a.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xd000 irq 21 ata2: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xd008 irq 21 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-8: ST3640323AS, CC1F, max UDMA/133 ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3640323AS CC1F PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder Advanced Linux Sound Architecture Driver Version 1.0.18a. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18 vendor=10de device=00ed alloc irq_2_pin on cpu 0 node 0 Yamaha DS-1 PCI 0000:02:07.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18 Yamaha DS-1 PCI 0000:02:07.0: firmware: using built-in firmware yamaha/ds1_dsp.fw Yamaha DS-1 PCI 0000:02:07.0: firmware: using built-in firmware yamaha/ds1e_ctrl.fw input: AT Translated Set 2 keyboard as /class/input/input0 ALSA device list: #0: Yamaha DS-1 (YMF724F) at 0xfebf8000, irq 18 IPv4 over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2400 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xf (2300 MHz), vid 0xe powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xf powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x11 powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x13 powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x16 Using IPI No-Shortcut mode rtc_cmos 00:02: setting system clock to 2009-09-23 23:23:24 UTC (1253748204) input: ImPS/2 Generic Wheel Mouse as /class/input/input1 ReiserFS: sda5: found reiserfs format "3.6" with standard journal ReiserFS: sda5: using ordered data mode ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda5: checking transaction log (sda5) ReiserFS: sda5: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 284k freed ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: sda5: warning: vs-500: unknown uniqueness -107167201[18060 365508 0xf6c0ec14 UNKNOWN] not found ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: sda5: warning: vs-500: unknown uniqueness -107167201[117144 365509 0xf6c58188 UNKNOWN] not found ip_tables: (C) 2000-2006 Netfilter Core Team ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x3c/0x50() Hardware name: To Be Filled By O.E.M. sysfs: duplicate filename 'audio' can not be created Modules linked in: sound(+) ipt_LOG ip_tables x_tables Pid: 1666, comm: modprobe Not tainted 2.6.28-04986-g295f000 #13 Call Trace: [] warn_slowpath+0x82/0xc0 [] schedule+0x21e/0x780 [] idr_get_empty_slot+0xe4/0x260 [] ida_get_new_above+0x79/0x1b0 [] sysfs_ilookup_test+0x0/0x10 [] sysfs_find_dirent+0x21/0x30 [] __sysfs_add_one+0x1d/0xe0 [] ilookup5+0x36/0x40 [] sysfs_add_one+0x3c/0x50 [] create_dir+0x48/0x90 [] sysfs_create_dir+0x29/0x40 [] kobject_get+0xf/0x20 [] kobject_add_internal+0x83/0x1d0 [] kobject_set_name_vargs+0x3a/0x50 [] kobject_add_varg+0x1e/0x60 [] kobject_add+0x2d/0x60 [] kobject_get+0xf/0x20 [] device_add+0xca/0x600 [] kobject_init+0x25/0xa0 [] device_create_vargs+0x8b/0xd0 [] device_create+0x2b/0x30 [] oss_init+0xa5/0x149 [sound] [] do_one_initcall+0x33/0x170 [] oss_init+0x0/0x149 [sound] [] sys_init_module+0x8b/0x1b0 [] sys_close+0x58/0x90 [] syscall_call+0x7/0xb ---[ end trace 706eab727743e4b1 ]--- kobject_add_internal failed for audio with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1666, comm: modprobe Tainted: G W 2.6.28-04986-g295f000 #13 Call Trace: [] kobject_add_internal+0x132/0x1d0 [] kobject_add+0x2d/0x60 [] kobject_get+0xf/0x20 [] device_add+0xca/0x600 [] kobject_init+0x25/0xa0 [] device_create_vargs+0x8b/0xd0 [] device_create+0x2b/0x30 [] oss_init+0xa5/0x149 [sound] [] do_one_initcall+0x33/0x170 [] oss_init+0x0/0x149 [sound] [] sys_init_module+0x8b/0x1b0 [] sys_close+0x58/0x90 [] syscall_call+0x7/0xb hdb: UDMA/33 mode selected Driver 'sr' needs updating - please use bus_type methods hdc: UDMA/33 mode selected hdd: UDMA/66 mode selected ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: warning: vs-500: unknown uniqueness -1071672013 ReiserFS: sda5: warning: vs-500: unknown uniqueness -107167201[117144 365512 0xf6c19e28 UNKNOWN] not found w83627ehf: Found W83627EHG chip at 0x290 warning: process `update' used the obsolete bdflush system call Fix your initscripts? warning: process `update' used the obsolete bdflush system call Fix your initscripts? -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/