Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752924AbZIXL6O (ORCPT ); Thu, 24 Sep 2009 07:58:14 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751941AbZIXL6M (ORCPT ); Thu, 24 Sep 2009 07:58:12 -0400 Received: from smtp.nokia.com ([192.100.122.230]:17929 "EHLO mgw-mx03.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752584AbZIXL5T (ORCPT ); Thu, 24 Sep 2009 07:57:19 -0400 From: Tomi Valkeinen To: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org, Tomi Valkeinen Subject: [PATCH 12/19] OMAP: DSS2: RFBI driver Date: Thu, 24 Sep 2009 14:56:17 +0300 Message-Id: <1253793384-31158-13-git-send-email-tomi.valkeinen@nokia.com> X-Mailer: git-send-email 1.6.4 In-Reply-To: <1253793384-31158-12-git-send-email-tomi.valkeinen@nokia.com> References: <1253793384-31158-1-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-2-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-3-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-4-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-5-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-6-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-7-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-8-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-9-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-10-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-11-git-send-email-tomi.valkeinen@nokia.com> <1253793384-31158-12-git-send-email-tomi.valkeinen@nokia.com> X-OriginalArrivalTime: 24 Sep 2009 11:56:44.0592 (UTC) FILETIME=[1644BB00:01CA3D0E] X-Nokia-AV: Clean Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31179 Lines: 1332 RFBI (Remote FrameBuffer Interface) implements MIPI DBI interface. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/rfbi.c | 1310 ++++++++++++++++++++++++++++++++++++++++ 1 files changed, 1310 insertions(+), 0 deletions(-) create mode 100644 drivers/video/omap2/dss/rfbi.c diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c new file mode 100644 index 0000000..9dd2349 --- /dev/null +++ b/drivers/video/omap2/dss/rfbi.c @@ -0,0 +1,1310 @@ +/* + * linux/drivers/video/omap2/dss/rfbi.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#define DSS_SUBSYS_NAME "RFBI" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include "dss.h" + +/*#define MEASURE_PERF*/ + +#define RFBI_BASE 0x48050800 + +struct rfbi_reg { u16 idx; }; + +#define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) + +#define RFBI_REVISION RFBI_REG(0x0000) +#define RFBI_SYSCONFIG RFBI_REG(0x0010) +#define RFBI_SYSSTATUS RFBI_REG(0x0014) +#define RFBI_CONTROL RFBI_REG(0x0040) +#define RFBI_PIXEL_CNT RFBI_REG(0x0044) +#define RFBI_LINE_NUMBER RFBI_REG(0x0048) +#define RFBI_CMD RFBI_REG(0x004c) +#define RFBI_PARAM RFBI_REG(0x0050) +#define RFBI_DATA RFBI_REG(0x0054) +#define RFBI_READ RFBI_REG(0x0058) +#define RFBI_STATUS RFBI_REG(0x005c) + +#define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) +#define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) +#define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) +#define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) +#define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) +#define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) + +#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) +#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) + +#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param)) + +#define REG_FLD_MOD(idx, val, start, end) \ + rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) + +/* To work around an RFBI transfer rate limitation */ +#define OMAP_RFBI_RATE_LIMIT 1 + +enum omap_rfbi_cycleformat { + OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, + OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, + OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, + OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, +}; + +enum omap_rfbi_datatype { + OMAP_DSS_RFBI_DATATYPE_12 = 0, + OMAP_DSS_RFBI_DATATYPE_16 = 1, + OMAP_DSS_RFBI_DATATYPE_18 = 2, + OMAP_DSS_RFBI_DATATYPE_24 = 3, +}; + +enum omap_rfbi_parallelmode { + OMAP_DSS_RFBI_PARALLELMODE_8 = 0, + OMAP_DSS_RFBI_PARALLELMODE_9 = 1, + OMAP_DSS_RFBI_PARALLELMODE_12 = 2, + OMAP_DSS_RFBI_PARALLELMODE_16 = 3, +}; + +enum update_cmd { + RFBI_CMD_UPDATE = 0, + RFBI_CMD_SYNC = 1, +}; + +static int rfbi_convert_timings(struct rfbi_timings *t); +static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); +static void process_cmd_fifo(void); + +static struct { + void __iomem *base; + + unsigned long l4_khz; + + enum omap_rfbi_datatype datatype; + enum omap_rfbi_parallelmode parallelmode; + + enum omap_rfbi_te_mode te_mode; + int te_enabled; + + void (*framedone_callback)(void *data); + void *framedone_callback_data; + + struct omap_dss_device *dssdev[2]; + + struct kfifo *cmd_fifo; + spinlock_t cmd_lock; + struct completion cmd_done; + atomic_t cmd_fifo_full; + atomic_t cmd_pending; +#ifdef MEASURE_PERF + unsigned perf_bytes; + ktime_t perf_setup_time; + ktime_t perf_start_time; +#endif +} rfbi; + +struct update_region { + u16 x; + u16 y; + u16 w; + u16 h; +}; + +struct update_param { + u8 rfbi_module; + u8 cmd; + + union { + struct update_region r; + struct completion *sync; + } par; +}; + +static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) +{ + __raw_writel(val, rfbi.base + idx.idx); +} + +static inline u32 rfbi_read_reg(const struct rfbi_reg idx) +{ + return __raw_readl(rfbi.base + idx.idx); +} + +static void rfbi_enable_clocks(bool enable) +{ + if (enable) + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + else + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +} + +void omap_rfbi_write_command(const void *buf, u32 len) +{ + rfbi_enable_clocks(1); + switch (rfbi.parallelmode) { + case OMAP_DSS_RFBI_PARALLELMODE_8: + { + const u8 *b = buf; + for (; len; len--) + rfbi_write_reg(RFBI_CMD, *b++); + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_16: + { + const u16 *w = buf; + BUG_ON(len & 1); + for (; len; len -= 2) + rfbi_write_reg(RFBI_CMD, *w++); + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_9: + case OMAP_DSS_RFBI_PARALLELMODE_12: + default: + BUG(); + } + rfbi_enable_clocks(0); +} +EXPORT_SYMBOL(omap_rfbi_write_command); + +void omap_rfbi_read_data(void *buf, u32 len) +{ + rfbi_enable_clocks(1); + switch (rfbi.parallelmode) { + case OMAP_DSS_RFBI_PARALLELMODE_8: + { + u8 *b = buf; + for (; len; len--) { + rfbi_write_reg(RFBI_READ, 0); + *b++ = rfbi_read_reg(RFBI_READ); + } + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_16: + { + u16 *w = buf; + BUG_ON(len & ~1); + for (; len; len -= 2) { + rfbi_write_reg(RFBI_READ, 0); + *w++ = rfbi_read_reg(RFBI_READ); + } + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_9: + case OMAP_DSS_RFBI_PARALLELMODE_12: + default: + BUG(); + } + rfbi_enable_clocks(0); +} +EXPORT_SYMBOL(omap_rfbi_read_data); + +void omap_rfbi_write_data(const void *buf, u32 len) +{ + rfbi_enable_clocks(1); + switch (rfbi.parallelmode) { + case OMAP_DSS_RFBI_PARALLELMODE_8: + { + const u8 *b = buf; + for (; len; len--) + rfbi_write_reg(RFBI_PARAM, *b++); + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_16: + { + const u16 *w = buf; + BUG_ON(len & 1); + for (; len; len -= 2) + rfbi_write_reg(RFBI_PARAM, *w++); + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_9: + case OMAP_DSS_RFBI_PARALLELMODE_12: + default: + BUG(); + + } + rfbi_enable_clocks(0); +} +EXPORT_SYMBOL(omap_rfbi_write_data); + +void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, + u16 x, u16 y, + u16 w, u16 h) +{ + int start_offset = scr_width * y + x; + int horiz_offset = scr_width - w; + int i; + + rfbi_enable_clocks(1); + + if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && + rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { + const u16 __iomem *pd = buf; + pd += start_offset; + + for (; h; --h) { + for (i = 0; i < w; ++i) { + const u8 __iomem *b = (const u8 __iomem *)pd; + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); + ++pd; + } + pd += horiz_offset; + } + } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && + rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { + const u32 __iomem *pd = buf; + pd += start_offset; + + for (; h; --h) { + for (i = 0; i < w; ++i) { + const u8 __iomem *b = (const u8 __iomem *)pd; + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2)); + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); + ++pd; + } + pd += horiz_offset; + } + } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && + rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { + const u16 __iomem *pd = buf; + pd += start_offset; + + for (; h; --h) { + for (i = 0; i < w; ++i) { + rfbi_write_reg(RFBI_PARAM, __raw_readw(pd)); + ++pd; + } + pd += horiz_offset; + } + } else { + BUG(); + } + + rfbi_enable_clocks(0); +} +EXPORT_SYMBOL(omap_rfbi_write_pixels); + +#ifdef MEASURE_PERF +static void perf_mark_setup(void) +{ + rfbi.perf_setup_time = ktime_get(); +} + +static void perf_mark_start(void) +{ + rfbi.perf_start_time = ktime_get(); +} + +static void perf_show(const char *name) +{ + ktime_t t, setup_time, trans_time; + u32 total_bytes; + u32 setup_us, trans_us, total_us; + + t = ktime_get(); + + setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time); + setup_us = (u32)ktime_to_us(setup_time); + if (setup_us == 0) + setup_us = 1; + + trans_time = ktime_sub(t, rfbi.perf_start_time); + trans_us = (u32)ktime_to_us(trans_time); + if (trans_us == 0) + trans_us = 1; + + total_us = setup_us + trans_us; + + total_bytes = rfbi.perf_bytes; + + DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, " + "%u kbytes/sec\n", + name, + setup_us, + trans_us, + total_us, + 1000*1000 / total_us, + total_bytes, + total_bytes * 1000 / total_us); +} +#else +#define perf_mark_setup() +#define perf_mark_start() +#define perf_show(x) +#endif + +void rfbi_transfer_area(u16 width, u16 height, + void (callback)(void *data), void *data) +{ + u32 l; + + /*BUG_ON(callback == 0);*/ + BUG_ON(rfbi.framedone_callback != NULL); + + DSSDBG("rfbi_transfer_area %dx%d\n", width, height); + + dispc_set_lcd_size(width, height); + + dispc_enable_lcd_out(1); + + rfbi.framedone_callback = callback; + rfbi.framedone_callback_data = data; + + rfbi_enable_clocks(1); + + rfbi_write_reg(RFBI_PIXEL_CNT, width * height); + + l = rfbi_read_reg(RFBI_CONTROL); + l = FLD_MOD(l, 1, 0, 0); /* enable */ + if (!rfbi.te_enabled) + l = FLD_MOD(l, 1, 4, 4); /* ITE */ + + perf_mark_start(); + + rfbi_write_reg(RFBI_CONTROL, l); +} + +static void framedone_callback(void *data, u32 mask) +{ + void (*callback)(void *data); + + DSSDBG("FRAMEDONE\n"); + + perf_show("DISPC"); + + REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); + + rfbi_enable_clocks(0); + + callback = rfbi.framedone_callback; + rfbi.framedone_callback = NULL; + + /*callback(rfbi.framedone_callback_data);*/ + + atomic_set(&rfbi.cmd_pending, 0); + + process_cmd_fifo(); +} + +#if 1 /* VERBOSE */ +static void rfbi_print_timings(void) +{ + u32 l; + u32 time; + + l = rfbi_read_reg(RFBI_CONFIG(0)); + time = 1000000000 / rfbi.l4_khz; + if (l & (1 << 4)) + time *= 2; + + DSSDBG("Tick time %u ps\n", time); + l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); + DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " + "REONTIME %d, REOFFTIME %d\n", + l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, + (l >> 20) & 0x0f, (l >> 24) & 0x3f); + + l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); + DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " + "ACCESSTIME %d\n", + (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, + (l >> 22) & 0x3f); +} +#else +static void rfbi_print_timings(void) {} +#endif + + + + +static u32 extif_clk_period; + +static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) +{ + int bus_tick = extif_clk_period * div; + return (ps + bus_tick - 1) / bus_tick * bus_tick; +} + +static int calc_reg_timing(struct rfbi_timings *t, int div) +{ + t->clk_div = div; + + t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); + + t->we_on_time = round_to_extif_ticks(t->we_on_time, div); + t->we_off_time = round_to_extif_ticks(t->we_off_time, div); + t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); + + t->re_on_time = round_to_extif_ticks(t->re_on_time, div); + t->re_off_time = round_to_extif_ticks(t->re_off_time, div); + t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); + + t->access_time = round_to_extif_ticks(t->access_time, div); + t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); + t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); + + DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", + t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); + DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", + t->we_on_time, t->we_off_time, t->re_cycle_time, + t->we_cycle_time); + DSSDBG("[reg]rdaccess %d cspulse %d\n", + t->access_time, t->cs_pulse_width); + + return rfbi_convert_timings(t); +} + +static int calc_extif_timings(struct rfbi_timings *t) +{ + u32 max_clk_div; + int div; + + rfbi_get_clk_info(&extif_clk_period, &max_clk_div); + for (div = 1; div <= max_clk_div; div++) { + if (calc_reg_timing(t, div) == 0) + break; + } + + if (div <= max_clk_div) + return 0; + + DSSERR("can't setup timings\n"); + return -1; +} + + +void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) +{ + int r; + + if (!t->converted) { + r = calc_extif_timings(t); + if (r < 0) + DSSERR("Failed to calc timings\n"); + } + + BUG_ON(!t->converted); + + rfbi_enable_clocks(1); + rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); + rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); + + /* TIMEGRANULARITY */ + REG_FLD_MOD(RFBI_CONFIG(rfbi_module), + (t->tim[2] ? 1 : 0), 4, 4); + + rfbi_print_timings(); + rfbi_enable_clocks(0); +} + +static int ps_to_rfbi_ticks(int time, int div) +{ + unsigned long tick_ps; + int ret; + + /* Calculate in picosecs to yield more exact results */ + tick_ps = 1000000000 / (rfbi.l4_khz) * div; + + ret = (time + tick_ps - 1) / tick_ps; + + return ret; +} + +#ifdef OMAP_RFBI_RATE_LIMIT +unsigned long rfbi_get_max_tx_rate(void) +{ + unsigned long l4_rate, dss1_rate; + int min_l4_ticks = 0; + int i; + + /* According to TI this can't be calculated so make the + * adjustments for a couple of known frequencies and warn for + * others. + */ + static const struct { + unsigned long l4_clk; /* HZ */ + unsigned long dss1_clk; /* HZ */ + unsigned long min_l4_ticks; + } ftab[] = { + { 55, 132, 7, }, /* 7.86 MPix/s */ + { 110, 110, 12, }, /* 9.16 MPix/s */ + { 110, 132, 10, }, /* 11 Mpix/s */ + { 120, 120, 10, }, /* 12 Mpix/s */ + { 133, 133, 10, }, /* 13.3 Mpix/s */ + }; + + l4_rate = rfbi.l4_khz / 1000; + dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000; + + for (i = 0; i < ARRAY_SIZE(ftab); i++) { + /* Use a window instead of an exact match, to account + * for different DPLL multiplier / divider pairs. + */ + if (abs(ftab[i].l4_clk - l4_rate) < 3 && + abs(ftab[i].dss1_clk - dss1_rate) < 3) { + min_l4_ticks = ftab[i].min_l4_ticks; + break; + } + } + if (i == ARRAY_SIZE(ftab)) { + /* Can't be sure, return anyway the maximum not + * rate-limited. This might cause a problem only for the + * tearing synchronisation. + */ + DSSERR("can't determine maximum RFBI transfer rate\n"); + return rfbi.l4_khz * 1000; + } + return rfbi.l4_khz * 1000 / min_l4_ticks; +} +#else +int rfbi_get_max_tx_rate(void) +{ + return rfbi.l4_khz * 1000; +} +#endif + +static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) +{ + *clk_period = 1000000000 / rfbi.l4_khz; + *max_clk_div = 2; +} + +static int rfbi_convert_timings(struct rfbi_timings *t) +{ + u32 l; + int reon, reoff, weon, weoff, cson, csoff, cs_pulse; + int actim, recyc, wecyc; + int div = t->clk_div; + + if (div <= 0 || div > 2) + return -1; + + /* Make sure that after conversion it still holds that: + * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, + * csoff > cson, csoff >= max(weoff, reoff), actim > reon + */ + weon = ps_to_rfbi_ticks(t->we_on_time, div); + weoff = ps_to_rfbi_ticks(t->we_off_time, div); + if (weoff <= weon) + weoff = weon + 1; + if (weon > 0x0f) + return -1; + if (weoff > 0x3f) + return -1; + + reon = ps_to_rfbi_ticks(t->re_on_time, div); + reoff = ps_to_rfbi_ticks(t->re_off_time, div); + if (reoff <= reon) + reoff = reon + 1; + if (reon > 0x0f) + return -1; + if (reoff > 0x3f) + return -1; + + cson = ps_to_rfbi_ticks(t->cs_on_time, div); + csoff = ps_to_rfbi_ticks(t->cs_off_time, div); + if (csoff <= cson) + csoff = cson + 1; + if (csoff < max(weoff, reoff)) + csoff = max(weoff, reoff); + if (cson > 0x0f) + return -1; + if (csoff > 0x3f) + return -1; + + l = cson; + l |= csoff << 4; + l |= weon << 10; + l |= weoff << 14; + l |= reon << 20; + l |= reoff << 24; + + t->tim[0] = l; + + actim = ps_to_rfbi_ticks(t->access_time, div); + if (actim <= reon) + actim = reon + 1; + if (actim > 0x3f) + return -1; + + wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); + if (wecyc < weoff) + wecyc = weoff; + if (wecyc > 0x3f) + return -1; + + recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); + if (recyc < reoff) + recyc = reoff; + if (recyc > 0x3f) + return -1; + + cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); + if (cs_pulse > 0x3f) + return -1; + + l = wecyc; + l |= recyc << 6; + l |= cs_pulse << 12; + l |= actim << 22; + + t->tim[1] = l; + + t->tim[2] = div - 1; + + t->converted = 1; + + return 0; +} + +/* xxx FIX module selection missing */ +int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, + unsigned hs_pulse_time, unsigned vs_pulse_time, + int hs_pol_inv, int vs_pol_inv, int extif_div) +{ + int hs, vs; + int min; + u32 l; + + hs = ps_to_rfbi_ticks(hs_pulse_time, 1); + vs = ps_to_rfbi_ticks(vs_pulse_time, 1); + if (hs < 2) + return -EDOM; + if (mode == OMAP_DSS_RFBI_TE_MODE_2) + min = 2; + else /* OMAP_DSS_RFBI_TE_MODE_1 */ + min = 4; + if (vs < min) + return -EDOM; + if (vs == hs) + return -EINVAL; + rfbi.te_mode = mode; + DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", + mode, hs, vs, hs_pol_inv, vs_pol_inv); + + rfbi_enable_clocks(1); + rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); + rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); + + l = rfbi_read_reg(RFBI_CONFIG(0)); + if (hs_pol_inv) + l &= ~(1 << 21); + else + l |= 1 << 21; + if (vs_pol_inv) + l &= ~(1 << 20); + else + l |= 1 << 20; + rfbi_enable_clocks(0); + + return 0; +} +EXPORT_SYMBOL(omap_rfbi_setup_te); + +/* xxx FIX module selection missing */ +int omap_rfbi_enable_te(bool enable, unsigned line) +{ + u32 l; + + DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); + if (line > (1 << 11) - 1) + return -EINVAL; + + rfbi_enable_clocks(1); + l = rfbi_read_reg(RFBI_CONFIG(0)); + l &= ~(0x3 << 2); + if (enable) { + rfbi.te_enabled = 1; + l |= rfbi.te_mode << 2; + } else + rfbi.te_enabled = 0; + rfbi_write_reg(RFBI_CONFIG(0), l); + rfbi_write_reg(RFBI_LINE_NUMBER, line); + rfbi_enable_clocks(0); + + return 0; +} +EXPORT_SYMBOL(omap_rfbi_enable_te); + +#if 0 +static void rfbi_enable_config(int enable1, int enable2) +{ + u32 l; + int cs = 0; + + if (enable1) + cs |= 1<<0; + if (enable2) + cs |= 1<<1; + + rfbi_enable_clocks(1); + + l = rfbi_read_reg(RFBI_CONTROL); + + l = FLD_MOD(l, cs, 3, 2); + l = FLD_MOD(l, 0, 1, 1); + + rfbi_write_reg(RFBI_CONTROL, l); + + + l = rfbi_read_reg(RFBI_CONFIG(0)); + l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */ + /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ + /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */ + + l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */ + l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */ + l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */ + + l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0); + rfbi_write_reg(RFBI_CONFIG(0), l); + + rfbi_enable_clocks(0); +} +#endif + +int rfbi_configure(int rfbi_module, int bpp, int lines) +{ + u32 l; + int cycle1 = 0, cycle2 = 0, cycle3 = 0; + enum omap_rfbi_cycleformat cycleformat; + enum omap_rfbi_datatype datatype; + enum omap_rfbi_parallelmode parallelmode; + + switch (bpp) { + case 12: + datatype = OMAP_DSS_RFBI_DATATYPE_12; + break; + case 16: + datatype = OMAP_DSS_RFBI_DATATYPE_16; + break; + case 18: + datatype = OMAP_DSS_RFBI_DATATYPE_18; + break; + case 24: + datatype = OMAP_DSS_RFBI_DATATYPE_24; + break; + default: + BUG(); + return 1; + } + rfbi.datatype = datatype; + + switch (lines) { + case 8: + parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; + break; + case 9: + parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; + break; + case 12: + parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; + break; + case 16: + parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; + break; + default: + BUG(); + return 1; + } + rfbi.parallelmode = parallelmode; + + if ((bpp % lines) == 0) { + switch (bpp / lines) { + case 1: + cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; + break; + case 2: + cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; + break; + case 3: + cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; + break; + default: + BUG(); + return 1; + } + } else if ((2 * bpp % lines) == 0) { + if ((2 * bpp / lines) == 3) + cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; + else { + BUG(); + return 1; + } + } else { + BUG(); + return 1; + } + + switch (cycleformat) { + case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: + cycle1 = lines; + break; + + case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: + cycle1 = lines; + cycle2 = lines; + break; + + case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: + cycle1 = lines; + cycle2 = lines; + cycle3 = lines; + break; + + case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: + cycle1 = lines; + cycle2 = (lines / 2) | ((lines / 2) << 16); + cycle3 = (lines << 16); + break; + } + + rfbi_enable_clocks(1); + + REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ + + l = 0; + l |= FLD_VAL(parallelmode, 1, 0); + l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ + l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ + l |= FLD_VAL(datatype, 6, 5); + /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ + l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ + l |= FLD_VAL(cycleformat, 10, 9); + l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ + l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ + l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ + l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ + l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ + l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ + l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ + rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); + + rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); + rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); + rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); + + + l = rfbi_read_reg(RFBI_CONTROL); + l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ + l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ + rfbi_write_reg(RFBI_CONTROL, l); + + + DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", + bpp, lines, cycle1, cycle2, cycle3); + + rfbi_enable_clocks(0); + + return 0; +} +EXPORT_SYMBOL(rfbi_configure); + +static int rfbi_find_display(struct omap_dss_device *dssdev) +{ + if (dssdev == rfbi.dssdev[0]) + return 0; + + if (dssdev == rfbi.dssdev[1]) + return 1; + + BUG(); + return -1; +} + + +static void signal_fifo_waiters(void) +{ + if (atomic_read(&rfbi.cmd_fifo_full) > 0) { + /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */ + complete(&rfbi.cmd_done); + atomic_dec(&rfbi.cmd_fifo_full); + } +} + +/* returns 1 for async op, and 0 for sync op */ +static int do_update(struct omap_dss_device *dssdev, struct update_region *upd) +{ + u16 x = upd->x; + u16 y = upd->y; + u16 w = upd->w; + u16 h = upd->h; + + perf_mark_setup(); + + if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { + /*dssdev->driver->enable_te(dssdev, 1); */ + dss_setup_partial_planes(dssdev, &x, &y, &w, &h); + } + +#ifdef MEASURE_PERF + rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */ +#endif + + dssdev->driver->setup_update(dssdev, x, y, w, h); + + if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { + rfbi_transfer_area(w, h, NULL, NULL); + return 1; + } else { + struct omap_overlay *ovl; + void __iomem *addr; + int scr_width; + + ovl = dssdev->manager->overlays[0]; + scr_width = ovl->info.screen_width; + addr = ovl->info.vaddr; + + omap_rfbi_write_pixels(addr, scr_width, x, y, w, h); + + perf_show("L4"); + + return 0; + } +} + +static void process_cmd_fifo(void) +{ + int len; + struct update_param p; + struct omap_dss_device *dssdev; + unsigned long flags; + + if (atomic_inc_return(&rfbi.cmd_pending) != 1) + return; + + while (true) { + spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); + + len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p, + sizeof(struct update_param)); + if (len == 0) { + DSSDBG("nothing more in fifo\n"); + atomic_set(&rfbi.cmd_pending, 0); + spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + break; + } + + /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/ + + spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + + BUG_ON(len != sizeof(struct update_param)); + BUG_ON(p.rfbi_module > 1); + + dssdev = rfbi.dssdev[p.rfbi_module]; + + if (p.cmd == RFBI_CMD_UPDATE) { + if (do_update(dssdev, &p.par.r)) + break; /* async op */ + } else if (p.cmd == RFBI_CMD_SYNC) { + DSSDBG("Signaling SYNC done!\n"); + complete(p.par.sync); + } else + BUG(); + } + + signal_fifo_waiters(); +} + +static void rfbi_push_cmd(struct update_param *p) +{ + int ret; + + while (1) { + unsigned long flags; + int available; + + spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); + available = RFBI_CMD_FIFO_LEN_BYTES - + __kfifo_len(rfbi.cmd_fifo); + +/* DSSDBG("%d bytes left in fifo\n", available); */ + if (available < sizeof(struct update_param)) { + DSSDBG("Going to wait because FIFO FULL..\n"); + spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + atomic_inc(&rfbi.cmd_fifo_full); + wait_for_completion(&rfbi.cmd_done); + /*DSSDBG("Woke up because fifo not full anymore\n");*/ + continue; + } + + ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p, + sizeof(struct update_param)); +/* DSSDBG("pushed %d bytes\n", ret);*/ + + spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + + BUG_ON(ret != sizeof(struct update_param)); + + break; + } +} + +static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h) +{ + struct update_param p; + + p.rfbi_module = rfbi_module; + p.cmd = RFBI_CMD_UPDATE; + + p.par.r.x = x; + p.par.r.y = y; + p.par.r.w = w; + p.par.r.h = h; + + DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h); + + rfbi_push_cmd(&p); + + process_cmd_fifo(); +} + +static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp) +{ + struct update_param p; + + p.rfbi_module = rfbi_module; + p.cmd = RFBI_CMD_SYNC; + p.par.sync = sync_comp; + + rfbi_push_cmd(&p); + + DSSDBG("RFBI sync pushed to cmd fifo\n"); + + process_cmd_fifo(); +} + +void rfbi_dump_regs(struct seq_file *s) +{ +#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r)) + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + DUMPREG(RFBI_REVISION); + DUMPREG(RFBI_SYSCONFIG); + DUMPREG(RFBI_SYSSTATUS); + DUMPREG(RFBI_CONTROL); + DUMPREG(RFBI_PIXEL_CNT); + DUMPREG(RFBI_LINE_NUMBER); + DUMPREG(RFBI_CMD); + DUMPREG(RFBI_PARAM); + DUMPREG(RFBI_DATA); + DUMPREG(RFBI_READ); + DUMPREG(RFBI_STATUS); + + DUMPREG(RFBI_CONFIG(0)); + DUMPREG(RFBI_ONOFF_TIME(0)); + DUMPREG(RFBI_CYCLE_TIME(0)); + DUMPREG(RFBI_DATA_CYCLE1(0)); + DUMPREG(RFBI_DATA_CYCLE2(0)); + DUMPREG(RFBI_DATA_CYCLE3(0)); + + DUMPREG(RFBI_CONFIG(1)); + DUMPREG(RFBI_ONOFF_TIME(1)); + DUMPREG(RFBI_CYCLE_TIME(1)); + DUMPREG(RFBI_DATA_CYCLE1(1)); + DUMPREG(RFBI_DATA_CYCLE2(1)); + DUMPREG(RFBI_DATA_CYCLE3(1)); + + DUMPREG(RFBI_VSYNC_WIDTH); + DUMPREG(RFBI_HSYNC_WIDTH); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +#undef DUMPREG +} + +int rfbi_init(void) +{ + u32 rev; + u32 l; + + spin_lock_init(&rfbi.cmd_lock); + rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL, + &rfbi.cmd_lock); + if (IS_ERR(rfbi.cmd_fifo)) + return -ENOMEM; + + init_completion(&rfbi.cmd_done); + atomic_set(&rfbi.cmd_fifo_full, 0); + atomic_set(&rfbi.cmd_pending, 0); + + rfbi.base = ioremap(RFBI_BASE, SZ_256); + if (!rfbi.base) { + DSSERR("can't ioremap RFBI\n"); + return -ENOMEM; + } + + rfbi_enable_clocks(1); + + msleep(10); + + rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000; + + /* Enable autoidle and smart-idle */ + l = rfbi_read_reg(RFBI_SYSCONFIG); + l |= (1 << 0) | (2 << 3); + rfbi_write_reg(RFBI_SYSCONFIG, l); + + rev = rfbi_read_reg(RFBI_REVISION); + printk(KERN_INFO "OMAP RFBI rev %d.%d\n", + FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); + + rfbi_enable_clocks(0); + + return 0; +} + +void rfbi_exit(void) +{ + DSSDBG("rfbi_exit\n"); + + kfifo_free(rfbi.cmd_fifo); + + iounmap(rfbi.base); +} + +/* struct omap_display support */ +static int rfbi_display_update(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h) +{ + int rfbi_module; + + if (w == 0 || h == 0) + return 0; + + rfbi_module = rfbi_find_display(dssdev); + + rfbi_push_update(rfbi_module, x, y, w, h); + + return 0; +} + +static int rfbi_display_sync(struct omap_dss_device *dssdev) +{ + struct completion sync_comp; + int rfbi_module; + + rfbi_module = rfbi_find_display(dssdev); + + init_completion(&sync_comp); + rfbi_push_sync(rfbi_module, &sync_comp); + DSSDBG("Waiting for SYNC to happen...\n"); + wait_for_completion(&sync_comp); + DSSDBG("Released from SYNC\n"); + return 0; +} + +static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable) +{ + dssdev->driver->enable_te(dssdev, enable); + return 0; +} + +static int rfbi_display_enable(struct omap_dss_device *dssdev) +{ + int r; + + r = omap_dss_start_device(dssdev); + if (r) { + DSSERR("failed to start device\n"); + goto err0; + } + + r = omap_dispc_register_isr(framedone_callback, NULL, + DISPC_IRQ_FRAMEDONE); + if (r) { + DSSERR("can't get FRAMEDONE irq\n"); + goto err1; + } + + dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); + + dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI); + + dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); + + rfbi_configure(dssdev->phy.rfbi.channel, + dssdev->ctrl.pixel_size, + dssdev->phy.rfbi.data_lines); + + rfbi_set_timings(dssdev->phy.rfbi.channel, + &dssdev->ctrl.rfbi_timings); + + + if (dssdev->driver->enable) { + r = dssdev->driver->enable(dssdev); + if (r) + goto err2; + } + + return 0; +err2: + omap_dispc_unregister_isr(framedone_callback, NULL, + DISPC_IRQ_FRAMEDONE); +err1: + omap_dss_stop_device(dssdev); +err0: + return r; +} + +static void rfbi_display_disable(struct omap_dss_device *dssdev) +{ + dssdev->driver->disable(dssdev); + omap_dispc_unregister_isr(framedone_callback, NULL, + DISPC_IRQ_FRAMEDONE); + omap_dss_stop_device(dssdev); +} + +int rfbi_init_display(struct omap_dss_device *dssdev) +{ + dssdev->enable = rfbi_display_enable; + dssdev->disable = rfbi_display_disable; + dssdev->update = rfbi_display_update; + dssdev->sync = rfbi_display_sync; + dssdev->enable_te = rfbi_display_enable_te; + + rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev; + + dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; + + return 0; +} -- 1.6.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/