Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755431AbZJLJ2a (ORCPT ); Mon, 12 Oct 2009 05:28:30 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755305AbZJLJ23 (ORCPT ); Mon, 12 Oct 2009 05:28:29 -0400 Received: from mx2.mail.elte.hu ([157.181.151.9]:54274 "EHLO mx2.mail.elte.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755373AbZJLJ2R (ORCPT ); Mon, 12 Oct 2009 05:28:17 -0400 Date: Mon, 12 Oct 2009 11:27:13 +0200 From: Ingo Molnar To: Linus Torvalds , Greg KH , Alan Cox Cc: Linux Kernel Mailing List Subject: Re: [crash] NULL pointer dereference at IP: [] uart_close+0x2a/0x1e4 Message-ID: <20091012092713.GA32647@elte.hu> References: <20091012080511.GA22607@elte.hu> <20091012091954.GA31171@elte.hu> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="RnlQjJ0d97Da+TV1" Content-Disposition: inline In-Reply-To: <20091012091954.GA31171@elte.hu> User-Agent: Mutt/1.5.18 (2008-05-17) X-ELTE-SpamScore: -1.5 X-ELTE-SpamLevel: X-ELTE-SpamCheck: no X-ELTE-SpamVersion: ELTE 2.0 X-ELTE-SpamCheck-Details: score=-1.5 required=5.9 tests=BAYES_00 autolearn=no SpamAssassin version=3.2.5 -1.5 BAYES_00 BODY: Bayesian spam probability is 0 to 1% [score: 0.0000] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 190255 Lines: 5600 --RnlQjJ0d97Da+TV1 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline i also have a crash with vanilla -rc4, test on this commit: d93a8f8: Revert "USB: Work around BIOS bugs by quiescing USB controllers earlier" crashlog pasted below - config attached. Ingo Linux version 2.6.32-rc4 (mingo@aldebaran) (gcc version 4.4.2 20091002 (prerelease) (GCC) ) #1 Mon Oct 12 11:22:47 CEST 2009 Command line: root=/dev/sda3 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 3 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable) BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data) BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) bootconsole [earlyser0] enabled debug: ignoring loglevel setting. DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x7ffa0 max_arch_pfn = 0x400000000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e4000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007ffa0000 (usable) modified: 000000007ffa0000 - 000000007ffae000 (ACPI data) modified: 000000007ffae000 - 000000007ffe0000 (ACPI NVS) modified: 000000007ffe0000 - 0000000080000000 (reserved) modified: 00000000ffb80000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007ffa0000 0000000000 - 007ffa0000 page 4k kernel direct mapping tables up to 7ffa0000 @ 100000-503000 ACPI: RSDP 00000000000facd0 00024 (v02 ACPIAM) ACPI: XSDT 000000007ffa0100 00044 (v01 A M I OEMXSDT 10000630 MSFT 00000097) ACPI: FACP 000000007ffa0290 000F4 (v03 A M I OEMFACP 10000630 MSFT 00000097) ACPI: DSDT 000000007ffa0410 08318 (v01 A0227 A0227000 00000000 INTL 02002026) ACPI: FACS 000000007ffae000 00040 ACPI: APIC 000000007ffa0390 00080 (v01 A M I OEMAPIC 10000630 MSFT 00000097) ACPI: OEMB 000000007ffae040 00066 (v01 A M I AMI_OEM 10000630 MSFT 00000097) ACPI: MCFG 000000007ffa8730 0003C (v01 A M I OEMMCFG 10000630 MSFT 00000097) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 007ffa0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0002881080] TEXT DATA BSS ==> [0001000000 - 0002881080] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0002882000 - 000288227c] BRK ==> [0002882000 - 000288227c] #5 [0000100000 - 0000501000] PGTABLE ==> [0000100000 - 0000501000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002e00000-ffff8800049fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007ffa0 On node 0 totalpages: 524079 DMA zone: 56 pages used for memmap DMA zone: 1124 pages reserved DMA zone: 2803 pages, LIFO batch:0 DMA32 zone: 7111 pages used for memmap DMA32 zone: 512985 pages, LIFO batch:31 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information mapped APIC to ffffffffff5fc000 (fee00000) mapped IOAPIC to ffffffffff5fb000 (fec00000) nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7fb80000) Booting paravirtualized kernel on bare hardware Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515788 Kernel command line: root=/dev/sda3 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 3 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled kernel profiling enabled (shift: 0) debug: sysrq always enabled. PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Memory: 2034728k/2096768k available (7661k kernel code, 452k absent, 61180k reserved, 6599k data, 812k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is enabled. NR_IRQS:288 Console: colour VGA+ 80x25 console [tty0] enabled, bootconsole disabled console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6335 kB per task-struct memory footprint: 2688 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | |failed| recursive read-lock #2: | ok | |failed| mixed read-write-lock: |failed| |failed| mixed write-read-lock: |failed| |failed| -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12:failed|failed| ok | soft-irqs-on + irq-safe-A/12:failed|failed| ok | hard-irqs-on + irq-safe-A/21:failed|failed| ok | soft-irqs-on + irq-safe-A/21:failed|failed| ok | sirq-safe-A => hirqs-on/12:failed|failed| ok | sirq-safe-A => hirqs-on/21:failed|failed| ok | hard-safe-A + irqs-on/12:failed|failed| ok | soft-safe-A + irqs-on/12:failed|failed| ok | hard-safe-A + irqs-on/21:failed|failed| ok | soft-safe-A + irqs-on/21:failed|failed| ok | hard-safe-A + unsafe-B #1/123:failed|failed| ok | soft-safe-A + unsafe-B #1/123:failed|failed| ok | hard-safe-A + unsafe-B #1/132:failed|failed| ok | soft-safe-A + unsafe-B #1/132:failed|failed| ok | hard-safe-A + unsafe-B #1/213:failed|failed| ok | soft-safe-A + unsafe-B #1/213:failed|failed| ok | hard-safe-A + unsafe-B #1/231:failed|failed| ok | soft-safe-A + unsafe-B #1/231:failed|failed| ok | hard-safe-A + unsafe-B #1/312:failed|failed| ok | soft-safe-A + unsafe-B #1/312:failed|failed| ok | hard-safe-A + unsafe-B #1/321:failed|failed| ok | soft-safe-A + unsafe-B #1/321:failed|failed| ok | hard-safe-A + unsafe-B #2/123:failed|failed| ok | soft-safe-A + unsafe-B #2/123:failed|failed| ok | hard-safe-A + unsafe-B #2/132:failed|failed| ok | soft-safe-A + unsafe-B #2/132:failed|failed| ok | hard-safe-A + unsafe-B #2/213:failed|failed| ok | soft-safe-A + unsafe-B #2/213:failed|failed| ok | hard-safe-A + unsafe-B #2/231:failed|failed| ok | soft-safe-A + unsafe-B #2/231:failed|failed| ok | hard-safe-A + unsafe-B #2/312:failed|failed| ok | soft-safe-A + unsafe-B #2/312:failed|failed| ok | hard-safe-A + unsafe-B #2/321:failed|failed| ok | soft-safe-A + unsafe-B #2/321:failed|failed| ok | hard-irq lock-inversion/123:failed|failed| ok | soft-irq lock-inversion/123:failed|failed| ok | hard-irq lock-inversion/132:failed|failed| ok | soft-irq lock-inversion/132:failed|failed| ok | hard-irq lock-inversion/213:failed|failed| ok | soft-irq lock-inversion/213:failed|failed| ok | hard-irq lock-inversion/231:failed|failed| ok | soft-irq lock-inversion/231:failed|failed| ok | hard-irq lock-inversion/312:failed|failed| ok | soft-irq lock-inversion/312:failed|failed| ok | hard-irq lock-inversion/321:failed|failed| ok | soft-irq lock-inversion/321:failed|failed| ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | -------------------------------------------------------- 133 out of 218 testcases failed, as expected. | ---------------------------------------------------- allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 3456.952 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6916.98 BogoMIPS (lpj=11523173) Security Framework initialized TOMOYO Linux initialized Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Performance Events: no PMU driver, software events only. CPU: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 32532 entries in 128 pages calling spawn_ksoftirqd+0x0/0x39 @ 1 initcall spawn_ksoftirqd+0x0/0x39 returned 0 after 0 usecs calling spawn_softlockup_task+0x0/0x55 @ 1 initcall spawn_softlockup_task+0x0/0x55 returned 0 after 0 usecs calling relay_init+0x0/0x8 @ 1 initcall relay_init+0x0/0x8 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x1a1 @ 1 initcall tracer_alloc_buffers+0x0/0x1a1 returned 0 after 0 usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs calling trace_workqueue_early_init+0x0/0xea @ 1 initcall trace_workqueue_early_init+0x0/0xea returned 0 after 0 usecs Setting APIC routing to flat enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs 2-0 (apicid-pin) not connected IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1440239 ..... delta 1440239 ..... mult: 61861827 ..... calibration result: 768127 ..... CPU clock speed is 3456.3059 MHz. ..... host bus clock speed is 230.1537 MHz. ... verify APIC timer ... jiffies delta = 30 ... jiffies result ok PM: Adding info for No Bus:platform khelper used greatest stack depth: 5808 bytes left calling init_mmap_min_addr+0x0/0x16 @ 1 initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs calling net_ns_init+0x0/0x153 @ 1 initcall net_ns_init+0x0/0x153 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x40 @ 1 initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x2d @ 1 initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs calling ksysfs_init+0x0/0xc0 @ 1 initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs calling async_init+0x0/0x60 @ 1 initcall async_init+0x0/0x60 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs calling pm_init+0x0/0x34 @ 1 initcall pm_init+0x0/0x34 returned 0 after 0 usecs calling pm_disk_init+0x0/0x19 @ 1 initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x31 @ 1 initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after 0 usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling debugfs_init+0x0/0x5c @ 1 initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs calling securityfs_init+0x0/0x53 @ 1 initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs calling random32_init+0x0/0x6d @ 1 initcall random32_init+0x0/0x6d returned 0 after 0 usecs calling gnttab_init+0x0/0x196 @ 1 initcall gnttab_init+0x0/0x196 returned -19 after 0 usecs calling regulator_init+0x0/0x2e @ 1 regulator: core version 0.5 initcall regulator_init+0x0/0x2e returned 0 after 3255 usecs calling early_resume_init+0x0/0x18 @ 1 Time: 9:22:18 Date: 10/12/09 initcall early_resume_init+0x0/0x18 returned 0 after 3255 usecs calling cpuidle_init+0x0/0x20 @ 1 initcall cpuidle_init+0x0/0x20 returned 0 after 0 usecs calling virtio_init+0x0/0x2b @ 1 initcall virtio_init+0x0/0x2b returned 0 after 0 usecs calling sock_init+0x0/0x59 @ 1 initcall sock_init+0x0/0x59 returned 0 after 0 usecs calling netpoll_init+0x0/0x41 @ 1 initcall netpoll_init+0x0/0x41 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x19e @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x19e returned 0 after 3255 usecs calling bdi_class_init+0x0/0x41 @ 1 initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x54 @ 1 initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after 3255 usecs calling backlight_class_init+0x0/0x5d @ 1 initcall backlight_class_init+0x0/0x5d returned 0 after 3255 usecs calling xenbus_probe_init+0x0/0x107 @ 1 initcall xenbus_probe_init+0x0/0x107 returned -19 after 0 usecs calling tty_class_init+0x0/0x38 @ 1 initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc2 @ 1 PM: Adding info for No Bus:vtcon0 initcall vtconsole_class_init+0x0/0xc2 returned 0 after 3255 usecs calling spi_init+0x0/0xd7 @ 1 initcall spi_init+0x0/0xd7 returned 0 after 0 usecs calling amd_postcore_init+0x0/0x3c @ 1 initcall amd_postcore_init+0x0/0x3c returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x2d @ 1 initcall arch_kdebugfs_init+0x0/0x2d returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x7e @ 1 initcall ffh_cstate_init+0x0/0x7e returned 0 after 0 usecs calling acpi_pci_init+0x0/0x57 @ 1 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x57 returned 0 after 3255 usecs calling dmi_id_init+0x0/0xfb @ 1 PM: Adding info for No Bus:id initcall dmi_id_init+0x0/0xfb returned 0 after 3255 usecs calling pci_arch_init+0x0/0x57 @ 1 PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x57 returned 0 after 6510 usecs calling topology_init+0x0/0x16 @ 1 initcall topology_init+0x0/0x16 returned 0 after 0 usecs calling param_sysfs_init+0x0/0xe4 @ 1 khelper used greatest stack depth: 5464 bytes left initcall param_sysfs_init+0x0/0xe4 returned 0 after 136718 usecs calling pm_sysrq_init+0x0/0x1e @ 1 initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs calling audit_watch_init+0x0/0x2f @ 1 initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs calling init_slow_work+0x0/0x1b @ 1 initcall init_slow_work+0x0/0x1b returned 0 after 0 usecs calling default_bdi_init+0x0/0xc6 @ 1 PM: Adding info for No Bus:default initcall default_bdi_init+0x0/0xc6 returned 0 after 3255 usecs calling init_bio+0x0/0x128 @ 1 bio: create slab at 0 initcall init_bio+0x0/0x128 returned 0 after 3255 usecs calling fsnotify_init+0x0/0x12 @ 1 initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0x68 @ 1 initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs calling blk_settings_init+0x0/0x2a @ 1 initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs calling blk_softirq_init+0x0/0x2e @ 1 initcall blk_softirq_init+0x0/0x2e returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x2e @ 1 initcall blk_iopoll_setup+0x0/0x2e returned 0 after 0 usecs calling genhd_device_init+0x0/0x66 @ 1 initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs calling blk_dev_integrity_init+0x0/0x2a @ 1 initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs calling gpiolib_debugfs_init+0x0/0x24 @ 1 initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs calling pci_slot_init+0x0/0x4b @ 1 initcall pci_slot_init+0x0/0x4b returned 0 after 0 usecs calling acpi_init+0x0/0x134 @ 1 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: Using MMCONFIG at f0000000 - f3ffffff PM: Adding info for acpi:LNXSYSTM:00 PM: Adding info for acpi:LNXCPU:00 PM: Adding info for acpi:LNXCPU:01 PM: Adding info for acpi:LNXCPU:02 PM: Adding info for acpi:LNXCPU:03 PM: Adding info for acpi:LNXSYBUS:00 PM: Adding info for acpi:PNP0A08:00 PM: Adding info for acpi:PNP0C01:00 PM: Adding info for acpi:device:00 PM: Adding info for acpi:device:01 PM: Adding info for acpi:device:02 PM: Adding info for acpi:device:03 PM: Adding info for acpi:device:04 PM: Adding info for acpi:device:05 PM: Adding info for acpi:device:06 PM: Adding info for acpi:device:07 PM: Adding info for acpi:device:08 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0800:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:PNP0700:00 PM: Adding info for acpi:PNP0401:00 PM: Adding info for acpi:PNP0C02:00 PM: Adding info for acpi:PNP0C02:01 PM: Adding info for acpi:ATK0110:00 PM: Adding info for acpi:PNP0C02:02 PM: Adding info for acpi:PNP0501:00 PM: Adding info for acpi:PNP0C02:03 PM: Adding info for acpi:device:09 PM: Adding info for acpi:device:0a PM: Adding info for acpi:device:0b PM: Adding info for acpi:device:0c PM: Adding info for acpi:device:0d PM: Adding info for acpi:device:0e PM: Adding info for acpi:device:0f PM: Adding info for acpi:device:10 PM: Adding info for acpi:device:11 PM: Adding info for acpi:device:12 PM: Adding info for acpi:device:13 PM: Adding info for acpi:device:14 PM: Adding info for acpi:device:15 PM: Adding info for acpi:device:16 PM: Adding info for acpi:PNP0C01:01 PM: Adding info for acpi:PNP0C0C:00 PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:07 PM: Adding info for acpi:LNXTHERM:00 PM: Adding info for acpi:LNXPWRBN:00 ACPI Warning: Incorrect checksum in table [OEMB] - 5F, should be 52 (20090903/tbutils-314) initcall acpi_init+0x0/0x134 returned 0 after 957029 usecs calling dock_init+0x0/0x8d @ 1 ACPI: No dock devices found. initcall dock_init+0x0/0x8d returned 0 after 3255 usecs calling acpi_pci_root_init+0x0/0x28 @ 1 ACPI: PCI Root Bridge [PCI0] (0000:00) PM: Adding info for No Bus:pci0000:00 PM: Adding info for No Bus:0000:00 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xd7cf8000-0xd7cfbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x7000-0x701f] pci 0000:00:1d.1: reg 20 io port: [0x7400-0x741f] pci 0000:00:1d.2: reg 20 io port: [0x7800-0x781f] pci 0000:00:1d.3: reg 20 io port: [0x8000-0x801f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd7cff800-0xd7cffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:1f.2: reg 10 io port: [0x9800-0x9807] pci 0000:00:1f.2: reg 14 io port: [0x9400-0x9403] pci 0000:00:1f.2: reg 18 io port: [0x9000-0x9007] pci 0000:00:1f.2: reg 1c io port: [0x8800-0x8803] pci 0000:00:1f.2: reg 20 io port: [0x8400-0x840f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd7cffc00-0xd7cfffff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:04:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:04:00.0: reg 14 io port: [0xe000-0xe0ff] pci 0000:04:00.0: reg 18 32bit mmio: [0xd7fe0000-0xd7feffff] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xd7fc0000-0xd7fdffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.1: reg 10 32bit mmio: [0xd7ff0000-0xd7ffffff] pci 0000:04:00.1: supports D1 D2 pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:01.0: bridge io port: [0xe000-0xefff] pci 0000:00:01.0: bridge 32bit mmio: [0xd7f00000-0xd7ffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] pci 0000:02:00.0: reg 10 64bit mmio: [0xd7efc000-0xd7efffff] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xd7ec0000-0xd7edffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.3: bridge 32bit mmio: [0xd7e00000-0xd7efffff] pci 0000:01:01.0: reg 10 32bit mmio: [0xd7ddf000-0xd7ddffff] pci 0000:01:01.0: reg 14 32bit mmio: [0xd7dde000-0xd7ddefff] pci 0000:01:01.0: supports D1 pci 0000:01:03.0: reg 10 io port: [0xb800-0xb807] pci 0000:01:03.0: reg 14 io port: [0xb400-0xb403] pci 0000:01:03.0: reg 18 io port: [0xb000-0xb007] pci 0000:01:03.0: reg 1c io port: [0xa800-0xa803] pci 0000:01:03.0: reg 20 io port: [0xa400-0xa40f] pci 0000:01:03.0: reg 30 32bit mmio pref: [0xd7de0000-0xd7dfffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xd7d00000-0xd7dfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:1b.0 PM: Adding info for pci:0000:00:1c.0 PM: Adding info for pci:0000:00:1c.3 PM: Adding info for pci:0000:00:1d.0 PM: Adding info for pci:0000:00:1d.1 PM: Adding info for pci:0000:00:1d.2 PM: Adding info for pci:0000:00:1d.3 PM: Adding info for pci:0000:00:1d.7 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.1 PM: Adding info for pci:0000:00:1f.2 PM: Adding info for pci:0000:00:1f.3 PM: Adding info for pci:0000:04:00.0 PM: Adding info for pci:0000:04:00.1 PM: Adding info for No Bus:0000:04 PM: Adding info for No Bus:0000:03 PM: Adding info for pci:0000:02:00.0 PM: Adding info for No Bus:0000:02 PM: Adding info for pci:0000:01:01.0 Clocksource tsc unstable (delta = 115790085 ns) PM: Adding info for pci:0000:01:03.0 PM: Adding info for No Bus:0000:01 initcall acpi_pci_root_init+0x0/0x28 returned 0 after 475259 usecs calling acpi_pci_link_init+0x0/0x43 @ 1 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) initcall acpi_pci_link_init+0x0/0x43 returned 0 after 58593 usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after 0 usecs calling setup_shutdown_event+0x0/0x14 @ 1 initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs calling misc_init+0x0/0xb7 @ 1 initcall misc_init+0x0/0xb7 returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x80 @ 1 PM: Adding info for No Bus:vga_arbiter vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0x80 returned 0 after 6510 usecs calling init_scsi+0x0/0x81 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x81 returned 0 after 3255 usecs calling ata_init+0x0/0x8d @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x8d returned 0 after 3255 usecs calling phy_init+0x0/0x2e @ 1 initcall phy_init+0x0/0x2e returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x36 @ 1 initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs calling nop_usb_xceiv_init+0x0/0x12 @ 1 initcall nop_usb_xceiv_init+0x0/0x12 returned 0 after 0 usecs calling usb_init+0x0/0x1ad @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x1ad returned 0 after 13020 usecs calling serio_init+0x0/0x86 @ 1 initcall serio_init+0x0/0x86 returned 0 after 0 usecs calling input_init+0x0/0xbd @ 1 khelper used greatest stack depth: 5224 bytes left initcall input_init+0x0/0xbd returned 0 after 3255 usecs calling init_dvbdev+0x0/0xd7 @ 1 initcall init_dvbdev+0x0/0xd7 returned 0 after 0 usecs calling power_supply_class_init+0x0/0x38 @ 1 initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs calling thermal_init+0x0/0x57 @ 1 initcall thermal_init+0x0/0x57 returned 0 after 0 usecs calling ac97_bus_init+0x0/0x12 @ 1 initcall ac97_bus_init+0x0/0x12 returned 0 after 0 usecs calling pci_subsys_init+0x0/0x107 @ 1 PCI: Using ACPI for IRQ routing initcall pci_subsys_init+0x0/0x107 returned 0 after 3255 usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after 0 usecs calling net_dev_init+0x0/0x15e @ 1 PM: Adding info for No Bus:lo initcall net_dev_init+0x0/0x15e returned 0 after 3255 usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after 0 usecs calling genl_init+0x0/0x8f @ 1 initcall genl_init+0x0/0x8f returned 0 after 0 usecs calling cipso_v4_init+0x0/0x88 @ 1 initcall cipso_v4_init+0x0/0x88 returned 0 after 0 usecs calling wanrouter_init+0x0/0x55 @ 1 Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. initcall wanrouter_init+0x0/0x55 returned 0 after 3255 usecs calling bt_init+0x0/0x5a @ 1 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized initcall bt_init+0x0/0x5a returned 0 after 9765 usecs calling wireless_nlevent_init+0x0/0x12 @ 1 initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs calling netlbl_init+0x0/0x81 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x81 returned 0 after 13020 usecs calling rfkill_init+0x0/0x79 @ 1 PM: Adding info for No Bus:rfkill initcall rfkill_init+0x0/0x79 returned 0 after 3255 usecs calling wpan_phy_class_init+0x0/0x19 @ 1 initcall wpan_phy_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_iommu_init+0x0/0x17 @ 1 initcall pci_iommu_init+0x0/0x17 returned 0 after 0 usecs calling print_all_ICs+0x0/0x4b @ 1 printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0c29 ... PIC ISR: 0000 ... PIC ELCR: 0e28 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00050014 ... APIC TASKPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000c0630 ... APIC ICR2: ff000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00010000 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 0000bb87 ... APIC TMCCT: 000027f5 ... APIC TDCR: 00000003 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 001 0 0 0 0 0 1 1 31 02 001 0 0 0 0 0 1 1 30 03 001 0 0 0 0 0 1 1 33 04 001 0 0 0 0 0 1 1 34 05 001 0 0 0 0 0 1 1 35 06 001 0 0 0 0 0 1 1 36 07 001 0 0 0 0 0 1 1 37 08 001 0 0 0 0 0 1 1 38 09 001 0 1 0 0 0 1 1 39 0a 001 0 0 0 0 0 1 1 3A 0b 001 0 0 0 0 0 1 1 3B 0c 001 0 0 0 0 0 1 1 3C 0d 001 0 0 0 0 0 1 1 3D 0e 001 0 0 0 0 0 1 1 3E 0f 001 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. initcall print_all_ICs+0x0/0x4b returned 0 after 175780 usecs calling hpet_late_init+0x0/0x6b @ 1 hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter initcall hpet_late_init+0x0/0x6b returned 0 after 13020 usecs calling clocksource_done_booting+0x0/0x38 @ 1 Switching to clocksource hpet initcall clocksource_done_booting+0x0/0x38 returned 0 after 3258 usecs calling ftrace_init_debugfs+0x0/0xba @ 1 initcall ftrace_init_debugfs+0x0/0xba returned 0 after 167 usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after 18 usecs calling tracer_init_debugfs+0x0/0x24d @ 1 initcall tracer_init_debugfs+0x0/0x24d returned 0 after 774 usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 18 usecs calling stat_workqueue_init+0x0/0x2b @ 1 initcall stat_workqueue_init+0x0/0x2b returned 0 after 41 usecs calling event_trace_init+0x0/0x1f7 @ 1 initcall event_trace_init+0x0/0x1f7 returned 0 after 37202 usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after 162 usecs calling eventpoll_init+0x0/0xe3 @ 1 initcall eventpoll_init+0x0/0xe3 returned 0 after 27 usecs calling anon_inode_init+0x0/0x127 @ 1 initcall anon_inode_init+0x0/0x127 returned 0 after 73 usecs calling tomoyo_initerface_init+0x0/0x11b @ 1 initcall tomoyo_initerface_init+0x0/0x11b returned 0 after 263 usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs calling acpi_event_init+0x0/0x81 @ 1 initcall acpi_event_init+0x0/0x81 returned 0 after 108 usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 ACPI: bus type pnp registered PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) PM: Adding info for pnp:00:05 IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) PM: Adding info for pnp:00:06 IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) PM: Adding info for pnp:00:0b PM: Adding info for pnp:00:0c PM: Adding info for pnp:00:0d pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 157696 usecs calling pnp_system_init+0x0/0x12 @ 1 system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved system 00:08: ioport range 0x290-0x297 has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x480-0x4bf has been reserved system 00:09: ioport range 0x900-0x91f has been reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:09: iomem range 0xfff00000-0xffffffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xdffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved initcall pnp_system_init+0x0/0x12 returned 0 after 95376 usecs calling chr_dev_init+0x0/0xc3 @ 1 PM: Adding info for No Bus:mem PM: Adding info for No Bus:kmem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg initcall chr_dev_init+0x0/0xc3 returned 0 after 30412 usecs calling firmware_class_init+0x0/0x79 @ 1 initcall firmware_class_init+0x0/0x79 returned 0 after 261 usecs calling ssb_modinit+0x0/0x49 @ 1 initcall ssb_modinit+0x0/0x49 returned 0 after 330 usecs calling pcibios_assign_resources+0x0/0x74 @ 1 pci 0000:01:03.0: BAR 6: address space collision on of device [0xd7de0000-0xd7dfffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04 pci 0000:00:01.0: IO window: 0xe000-0xefff pci 0000:00:01.0: MEM window: 0xd7f00000-0xd7ffffff pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.0: IO window: 0xd000-0xdfff pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.3: IO window: 0xc000-0xcfff pci 0000:00:1c.3: MEM window: 0xd7e00000-0xd7efffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0xa000-0xbfff pci 0000:00:1e.0: MEM window: 0xd7d00000-0xd7dfffff pci 0000:00:1e.0: PREFETCH window: 0x80400000-0x804fffff IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 IOAPIC[0]: Set routing entry (2-19 -> 0x51 -> IRQ 19 Mode:1 Active:1) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] pci_bus 0000:04: resource 1 mem: [0xd7f00000-0xd7ffffff] pci_bus 0000:04: resource 2 pref mem [0xd8000000-0xdfffffff] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] pci_bus 0000:03: resource 1 mem: [0x80000000-0x801fffff] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] pci_bus 0000:02: resource 1 mem: [0xd7e00000-0xd7efffff] pci_bus 0000:01: resource 0 io: [0xa000-0xbfff] pci_bus 0000:01: resource 1 mem: [0xd7d00000-0xd7dfffff] pci_bus 0000:01: resource 2 pref mem [0x80400000-0x804fffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 201862 usecs calling inet_init+0x0/0x199 @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) IPv4 FIB: Using LC-trie version 0.409 TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 32768 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 262144 bind 32768) TCP reno registered initcall inet_init+0x0/0x199 returned 0 after 38666 usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 3138 usecs calling populate_rootfs+0x0/0x10f @ 1 initcall populate_rootfs+0x0/0x10f returned 0 after 422 usecs calling calgary_fixup_tce_spaces+0x0/0xf9 @ 1 initcall calgary_fixup_tce_spaces+0x0/0xf9 returned -19 after 0 usecs calling irqfd_module_init+0x0/0x35 @ 1 initcall irqfd_module_init+0x0/0x35 returned 0 after 168 usecs calling vmx_init+0x0/0x1fd @ 1 PM: Adding info for No Bus:kvm initcall vmx_init+0x0/0x1fd returned 0 after 4498 usecs calling i8259A_init_sysfs+0x0/0x22 @ 1 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 499 usecs calling vsyscall_init+0x0/0xbd @ 1 initcall vsyscall_init+0x0/0xbd returned 0 after 1 usecs calling sbf_init+0x0/0xe9 @ 1 initcall sbf_init+0x0/0xe9 returned 0 after 0 usecs calling i8237A_init_sysfs+0x0/0x22 @ 1 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 601 usecs calling add_rtc_cmos+0x0/0xa9 @ 1 initcall add_rtc_cmos+0x0/0xa9 returned 0 after 3 usecs calling cache_sysfs_init+0x0/0x26 @ 1 initcall cache_sysfs_init+0x0/0x26 returned 0 after 911 usecs calling cpu_debug_init+0x0/0xa9 @ 1 cpu0(1) debug files 237 initcall cpu_debug_init+0x0/0xa9 returned 0 after 12677 usecs calling mce_init_device+0x0/0xc6 @ 1 PM: Adding info for No Bus:mcelog initcall mce_init_device+0x0/0xc6 returned 0 after 4075 usecs calling inject_init+0x0/0x32 @ 1 Machine check injector initialized initcall inject_init+0x0/0x32 returned 0 after 3183 usecs calling thermal_throttle_init_device+0x0/0x3e @ 1 initcall thermal_throttle_init_device+0x0/0x3e returned 0 after 38 usecs calling cpuid_init+0x0/0xdf @ 1 PM: Adding info for No Bus:cpu0 initcall cpuid_init+0x0/0xdf returned 0 after 3619 usecs calling ioapic_init_sysfs+0x0/0xb3 @ 1 initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 506 usecs calling microcode_init+0x0/0xfe @ 1 PM: Adding info for platform:microcode microcode: CPU0 sig=0xf62, pf=0x4, revision=0xf PM: Adding info for No Bus:microcode Microcode Update Driver: v2.00 , Peter Oruba initcall microcode_init+0x0/0xfe returned 0 after 18589 usecs calling start_periodic_check_for_corruption+0x0/0x3c @ 1 Scanning for low memory corruption every 60 seconds initcall start_periodic_check_for_corruption+0x0/0x3c returned 0 after 4624 usecs calling audit_classes_init+0x0/0xaf @ 1 initcall audit_classes_init+0x0/0xaf returned 0 after 88 usecs calling start_pageattr_test+0x0/0x47 @ 1 initcall start_pageattr_test+0x0/0x47 returned 0 after 71 usecs calling crypto_fpu_module_init+0x0/0x12 @ 1 initcall crypto_fpu_module_init+0x0/0x12 returned 0 after 40 usecs calling aes_init+0x0/0x12 @ 1 initcall aes_init+0x0/0x12 returned 0 after 199 usecs calling aesni_init+0x0/0x142 @ 1 Intel AES-NI instructions are not detected. initcall aesni_init+0x0/0x142 returned -19 after 3944 usecs calling init_vdso_vars+0x0/0x210 @ 1 initcall init_vdso_vars+0x0/0x210 returned 0 after 53 usecs calling sysenter_setup+0x0/0xaf @ 1 initcall sysenter_setup+0x0/0xaf returned 0 after 7 usecs calling init_sched_debug_procfs+0x0/0x2c @ 1 initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 26 usecs calling proc_schedstat_init+0x0/0x22 @ 1 initcall proc_schedstat_init+0x0/0x22 returned 0 after 18 usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after 17 usecs calling ioresources_init+0x0/0x3c @ 1 initcall ioresources_init+0x0/0x3c returned 0 after 32 usecs calling uid_cache_init+0x0/0x8a @ 1 initcall uid_cache_init+0x0/0x8a returned 0 after 18 usecs calling init_posix_timers+0x0/0x17a @ 1 initcall init_posix_timers+0x0/0x17a returned 0 after 12 usecs calling init_posix_cpu_timers+0x0/0xe5 @ 1 initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after 3 usecs calling create_proc_profile+0x0/0x4b @ 1 initcall create_proc_profile+0x0/0x4b returned 0 after 18 usecs calling timekeeping_init_device+0x0/0x22 @ 1 initcall timekeeping_init_device+0x0/0x22 returned 0 after 472 usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 573 usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after 33 usecs calling lockdep_proc_init+0x0/0x5f @ 1 initcall lockdep_proc_init+0x0/0x5f returned 0 after 48 usecs calling futex_init+0x0/0x7d @ 1 initcall futex_init+0x0/0x7d returned 0 after 6 usecs calling init_rttest+0x0/0x155 @ 1 Initializing RT-Tester: OK initcall init_rttest+0x0/0x155 returned 0 after 5544 usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after 39 usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after 18 usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after 18 usecs calling snapshot_device_init+0x0/0x12 @ 1 PM: Adding info for No Bus:snapshot initcall snapshot_device_init+0x0/0x12 returned 0 after 3632 usecs calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 28 usecs calling crash_notes_memory_init+0x0/0x88 @ 1 initcall crash_notes_memory_init+0x0/0x88 returned 0 after 23 usecs calling backtrace_regression_test+0x0/0x105 @ 1 ====[ backtrace testing ]=========== Testing a backtrace from process context. The following trace is a kernel self test and not a bug! Pid: 1, comm: swapper Not tainted 2.6.32-rc4 #1 Call Trace: [] ? backtrace_regression_test+0x0/0x105 [] backtrace_regression_test+0x3d/0x105 [] ? printk+0x41/0x43 [] ? ktime_get+0x65/0xbb [] ? backtrace_regression_test+0x0/0x105 [] ? backtrace_regression_test+0x0/0x105 [] do_one_initcall+0x5c/0x15b [] do_basic_setup+0x4f/0x61 [] kernel_init+0x5d/0xa0 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] child_rip+0xa/0x20 [] ? T.1296+0x0/0xd5 [] ? restore_args+0x0/0x30 [] ? kernel_init+0x0/0xa0 [] ? child_rip+0x0/0x20 Testing a backtrace from irq context. The following trace is a kernel self test and not a bug! Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.32-rc4 #1 Call Trace: [] backtrace_test_irq_callback+0xe/0x1c [] tasklet_action+0x63/0xaa [] __do_softirq+0xe0/0x1b4 [] call_softirq+0x1a/0x30 [] do_softirq+0x49/0xa4 [] ksoftirqd+0x4c/0xc9 [] ? ksoftirqd+0x0/0xc9 [] kthread+0x7e/0x86 [] child_rip+0xa/0x20 [] ? T.1296+0x0/0xd5 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x86 [] ? child_rip+0x0/0x20 Testing a saved backtrace. The following trace is a kernel self test and not a bug! [] save_stack_trace+0x2e/0x4b [] backtrace_regression_test+0xe1/0x105 [] do_one_initcall+0x5c/0x15b [] do_basic_setup+0x4f/0x61 [] kernel_init+0x5d/0xa0 [] child_rip+0xa/0x20 [] 0xffffffffffffffff ====[ end of backtrace testing ]==== initcall backtrace_regression_test+0x0/0x105 returned 0 after 191206 usecs calling audit_init+0x0/0x153 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1255339340.578:1): initialized initcall audit_init+0x0/0x153 returned 0 after 8401 usecs calling audit_tree_init+0x0/0x49 @ 1 initcall audit_tree_init+0x0/0x49 returned 0 after 10 usecs calling hung_task_init+0x0/0x53 @ 1 initcall hung_task_init+0x0/0x53 returned 0 after 65 usecs calling rcuclassic_trace_init+0x0/0xf8 @ 1 initcall rcuclassic_trace_init+0x0/0xf8 returned 0 after 121 usecs calling init_tracepoints+0x0/0x17 @ 1 initcall init_tracepoints+0x0/0x17 returned 0 after 1 usecs calling init_lstats_procfs+0x0/0x25 @ 1 initcall init_lstats_procfs+0x0/0x25 returned 0 after 19 usecs calling ftrace_mod_cmd_init+0x0/0x12 @ 1 initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 11 usecs calling init_events+0x0/0x64 @ 1 initcall init_events+0x0/0x64 returned 0 after 13 usecs calling init_sched_switch_trace+0x0/0x12 @ 1 initcall init_sched_switch_trace+0x0/0x12 returned 0 after 4 usecs calling init_stack_trace+0x0/0x12 @ 1 initcall init_stack_trace+0x0/0x12 returned 0 after 2 usecs calling init_function_trace+0x0/0x3e @ 1 initcall init_function_trace+0x0/0x3e returned 0 after 3 usecs calling init_irqsoff_tracer+0x0/0x14 @ 1 initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 2 usecs calling init_wakeup_tracer+0x0/0x22 @ 1 initcall init_wakeup_tracer+0x0/0x22 returned 0 after 3 usecs calling stack_trace_init+0x0/0x6b @ 1 initcall stack_trace_init+0x0/0x6b returned 0 after 52 usecs calling init_blk_tracer+0x0/0x55 @ 1 initcall init_blk_tracer+0x0/0x55 returned 0 after 4 usecs calling perf_event_sysfs_init+0x0/0x19 @ 1 initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 30 usecs calling init_per_zone_wmark_min+0x0/0x67 @ 1 initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 149 usecs calling kswapd_init+0x0/0x14 @ 1 initcall kswapd_init+0x0/0x14 returned 0 after 73 usecs calling setup_vmstat+0x0/0x7c @ 1 initcall setup_vmstat+0x0/0x7c returned 0 after 80 usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after 29 usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after 18 usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after 18 usecs calling pfn_inject_init+0x0/0x64 @ 1 initcall pfn_inject_init+0x0/0x64 returned 0 after 34 usecs calling fasync_init+0x0/0x2a @ 1 initcall fasync_init+0x0/0x2a returned 0 after 5 usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after 19 usecs calling dnotify_init+0x0/0x80 @ 1 initcall dnotify_init+0x0/0x80 returned 0 after 22 usecs calling inotify_setup+0x0/0x12 @ 1 initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs calling inotify_user_setup+0x0/0xbe @ 1 initcall inotify_user_setup+0x0/0xbe returned 0 after 82 usecs calling aio_setup+0x0/0xa5 @ 1 initcall aio_setup+0x0/0xa5 returned 0 after 91 usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after 21 usecs calling init_sys32_ioctl+0x0/0x83 @ 1 initcall init_sys32_ioctl+0x0/0x83 returned 0 after 18 usecs calling init_mbcache+0x0/0x14 @ 1 initcall init_mbcache+0x0/0x14 returned 0 after 3 usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after 19 usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 19 usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after 19 usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after 18 usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after 18 usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after 18 usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after 21 usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after 19 usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after 18 usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after 18 usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after 19 usecs calling configfs_init+0x0/0xb3 @ 1 initcall configfs_init+0x0/0xb3 returned 0 after 32 usecs calling init_devpts_fs+0x0/0x4c @ 1 initcall init_devpts_fs+0x0/0x4c returned 0 after 100 usecs calling init_ext3_fs+0x0/0x71 @ 1 initcall init_ext3_fs+0x0/0x71 returned 0 after 47 usecs calling init_ext4_fs+0x0/0xe9 @ 1 initcall init_ext4_fs+0x0/0xe9 returned 0 after 99 usecs calling journal_init+0x0/0x1e @ 1 initcall journal_init+0x0/0x1e returned 0 after 36 usecs calling journal_init+0x0/0x73 @ 1 initcall journal_init+0x0/0x73 returned 0 after 58 usecs calling init_cramfs_fs+0x0/0x2e @ 1 initcall init_cramfs_fs+0x0/0x2e returned 0 after 54 usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after 2 usecs calling init_fat_fs+0x0/0x4f @ 1 initcall init_fat_fs+0x0/0x4f returned 0 after 14 usecs calling init_vfat_fs+0x0/0x12 @ 1 initcall init_vfat_fs+0x0/0x12 returned 0 after 2 usecs calling init_msdos_fs+0x0/0x12 @ 1 initcall init_msdos_fs+0x0/0x12 returned 0 after 2 usecs calling init_hfsplus_fs+0x0/0x5f @ 1 initcall init_hfsplus_fs+0x0/0x5f returned 0 after 10 usecs calling ecryptfs_init+0x0/0x1d5 @ 1 PM: Adding info for No Bus:ecryptfs initcall ecryptfs_init+0x0/0x1d5 returned 0 after 3849 usecs calling init_nls_cp850+0x0/0x12 @ 1 initcall init_nls_cp850+0x0/0x12 returned 0 after 9 usecs calling init_nls_cp852+0x0/0x12 @ 1 initcall init_nls_cp852+0x0/0x12 returned 0 after 0 usecs calling init_nls_cp855+0x0/0x12 @ 1 initcall init_nls_cp855+0x0/0x12 returned 0 after 0 usecs calling init_nls_cp860+0x0/0x12 @ 1 initcall init_nls_cp860+0x0/0x12 returned 0 after 0 usecs calling init_nls_cp864+0x0/0x12 @ 1 initcall init_nls_cp864+0x0/0x12 returned 0 after 0 usecs calling init_nls_ascii+0x0/0x12 @ 1 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs calling init_nls_iso8859_1+0x0/0x12 @ 1 initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs calling init_nls_iso8859_5+0x0/0x12 @ 1 initcall init_nls_iso8859_5+0x0/0x12 returned 0 after 1 usecs calling init_nls_cp1255+0x0/0x12 @ 1 initcall init_nls_cp1255+0x0/0x12 returned 0 after 0 usecs calling init_nls_iso8859_14+0x0/0x12 @ 1 initcall init_nls_iso8859_14+0x0/0x12 returned 0 after 1 usecs calling init_nls_koi8_u+0x0/0x12 @ 1 initcall init_nls_koi8_u+0x0/0x12 returned 0 after 1 usecs calling init_nls_koi8_ru+0x0/0x48 @ 1 initcall init_nls_koi8_ru+0x0/0x48 returned 0 after 1 usecs calling init_nls_utf8+0x0/0x29 @ 1 initcall init_nls_utf8+0x0/0x29 returned 0 after 1 usecs calling init_efs_fs+0x0/0x71 @ 1 EFS: 1.0a - http://aeschi.ch.eu.org/efs/ initcall init_efs_fs+0x0/0x71 returned 0 after 3718 usecs calling init_affs_fs+0x0/0x63 @ 1 initcall init_affs_fs+0x0/0x63 returned 0 after 10 usecs calling init_adfs_fs+0x0/0x63 @ 1 initcall init_adfs_fs+0x0/0x63 returned 0 after 10 usecs calling init_befs_fs+0x0/0x7f @ 1 BeFS version: 0.9.3 initcall init_befs_fs+0x0/0x7f returned 0 after 1921 usecs calling ipc_init+0x0/0x23 @ 1 msgmni has been set to 3974 initcall ipc_init+0x0/0x23 returned 0 after 2665 usecs calling init_mqueue_fs+0x0/0xc7 @ 1 initcall init_mqueue_fs+0x0/0xc7 returned 0 after 119 usecs calling key_proc_init+0x0/0x59 @ 1 initcall key_proc_init+0x0/0x59 returned 0 after 34 usecs calling crypto_wq_init+0x0/0x32 @ 1 initcall crypto_wq_init+0x0/0x32 returned 0 after 80 usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after 22 usecs calling skcipher_module_init+0x0/0x13 @ 1 initcall skcipher_module_init+0x0/0x13 returned 0 after 0 usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after 5 usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after 4 usecs calling seqiv_module_init+0x0/0x12 @ 1 initcall seqiv_module_init+0x0/0x12 returned 0 after 4 usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after 4 usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after 185 usecs calling rmd320_mod_init+0x0/0x12 @ 1 initcall rmd320_mod_init+0x0/0x12 returned 0 after 196 usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 183 usecs calling sha256_generic_mod_init+0x0/0x3f @ 1 initcall sha256_generic_mod_init+0x0/0x3f returned 0 after 361 usecs calling sha512_generic_mod_init+0x0/0x3f @ 1 initcall sha512_generic_mod_init+0x0/0x3f returned 0 after 429 usecs calling wp512_mod_init+0x0/0x64 @ 1 initcall wp512_mod_init+0x0/0x64 returned 0 after 610 usecs calling tgr192_mod_init+0x0/0x65 @ 1 initcall tgr192_mod_init+0x0/0x65 returned 0 after 536 usecs calling crypto_ecb_module_init+0x0/0x12 @ 1 initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 20 usecs calling crypto_cbc_module_init+0x0/0x12 @ 1 initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 4 usecs calling crypto_pcbc_module_init+0x0/0x12 @ 1 initcall crypto_pcbc_module_init+0x0/0x12 returned 0 after 4 usecs calling crypto_cts_module_init+0x0/0x12 @ 1 initcall crypto_cts_module_init+0x0/0x12 returned 0 after 4 usecs calling crypto_ctr_module_init+0x0/0x3e @ 1 initcall crypto_ctr_module_init+0x0/0x3e returned 0 after 6 usecs calling crypto_gcm_module_init+0x0/0xe3 @ 1 initcall crypto_gcm_module_init+0x0/0xe3 returned 0 after 14 usecs calling crypto_ccm_module_init+0x0/0x60 @ 1 initcall crypto_ccm_module_init+0x0/0x60 returned 0 after 9 usecs calling cryptd_init+0x0/0x2e @ 1 initcall cryptd_init+0x0/0x2e returned 0 after 9 usecs calling fcrypt_mod_init+0x0/0x12 @ 1 alg: No test for fcrypt (fcrypt-generic) initcall fcrypt_mod_init+0x0/0x12 returned 0 after 3789 usecs calling blowfish_mod_init+0x0/0x12 @ 1 initcall blowfish_mod_init+0x0/0x12 returned 0 after 663 usecs calling aes_init+0x0/0x12 @ 1 initcall aes_init+0x0/0x12 returned 0 after 229 usecs calling camellia_init+0x0/0x12 @ 1 initcall camellia_init+0x0/0x12 returned 0 after 243 usecs calling arc4_init+0x0/0x12 @ 1 initcall arc4_init+0x0/0x12 returned 0 after 191 usecs calling tea_mod_init+0x0/0x64 @ 1 initcall tea_mod_init+0x0/0x64 returned 0 after 687 usecs calling seed_init+0x0/0x12 @ 1 initcall seed_init+0x0/0x12 returned 0 after 209 usecs calling salsa20_generic_mod_init+0x0/0x12 @ 1 initcall salsa20_generic_mod_init+0x0/0x12 returned 0 after 116 usecs calling deflate_mod_init+0x0/0x12 @ 1 initcall deflate_mod_init+0x0/0x12 returned 0 after 657 usecs calling crc32c_mod_init+0x0/0x12 @ 1 initcall crc32c_mod_init+0x0/0x12 returned 0 after 322 usecs calling crypto_authenc_module_init+0x0/0x12 @ 1 initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 21 usecs calling krng_mod_init+0x0/0x12 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x12 returned 0 after 2968 usecs calling ghash_mod_init+0x0/0x12 @ 1 alg: No test for ghash (ghash-generic) initcall ghash_mod_init+0x0/0x12 returned 0 after 3654 usecs calling proc_genhd_init+0x0/0x3c @ 1 initcall proc_genhd_init+0x0/0x3c returned 0 after 54 usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 2684 usecs calling as_init+0x0/0x14 @ 1 io scheduler anticipatory registered (default) initcall as_init+0x0/0x14 returned 0 after 4197 usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 3014 usecs calling dynamic_debug_init+0x0/0x12c @ 1 initcall dynamic_debug_init+0x0/0x12c returned 0 after 1011 usecs calling pci_init+0x0/0x3a @ 1 pci 0000:04:00.0: Boot video device initcall pci_init+0x0/0x3a returned 0 after 3605 usecs calling pci_proc_init+0x0/0x6a @ 1 initcall pci_proc_init+0x0/0x6a returned 0 after 627 usecs calling pcie_portdrv_init+0x0/0x4c @ 1 pcieport-driver 0000:00:01.0: setting latency timer to 64 PM: Adding info for pci_express:0000:00:01.0:pcie01 PM: Adding info for pci_express:0000:00:01.0:pcie08 pcieport-driver 0000:00:1c.0: setting latency timer to 64 PM: Adding info for pci_express:0000:00:1c.0:pcie01 PM: Adding info for pci_express:0000:00:1c.0:pcie04 PM: Adding info for pci_express:0000:00:1c.0:pcie08 pcieport-driver 0000:00:1c.3: setting latency timer to 64 PM: Adding info for pci_express:0000:00:1c.3:pcie01 PM: Adding info for pci_express:0000:00:1c.3:pcie08 initcall pcie_portdrv_init+0x0/0x4c returned 0 after 51719 usecs calling aer_service_init+0x0/0xb @ 1 initcall aer_service_init+0x0/0xb returned -6 after 0 usecs initcall aer_service_init+0x0/0xb returned with error code -6 calling aer_inject_init+0x0/0x12 @ 1 PM: Adding info for No Bus:aer_inject initcall aer_inject_init+0x0/0x12 returned 0 after 3854 usecs calling genericbl_init+0x0/0x12 @ 1 initcall genericbl_init+0x0/0x12 returned 0 after 276 usecs calling progearbl_init+0x0/0x55 @ 1 PM: Adding info for platform:progear-bl ALI M7101 PMU not found. initcall progearbl_init+0x0/0x55 returned 0 after 6756 usecs calling display_class_init+0x0/0x7e @ 1 initcall display_class_init+0x0/0x7e returned 0 after 279 usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after 44 usecs calling irqrouter_init_sysfs+0x0/0x38 @ 1 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 455 usecs calling acpi_button_init+0x0/0x56 @ 1 PM: Adding info for No Bus:input0 input: Power Button as /class/input/input0 ACPI: Power Button [PWRB] PM: Adding info for No Bus:input1 input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] initcall acpi_button_init+0x0/0x56 returned 0 after 20714 usecs calling acpi_fan_init+0x0/0x56 @ 1 initcall acpi_fan_init+0x0/0x56 returned 0 after 315 usecs calling acpi_smb_hc_init+0x0/0x18 @ 1 initcall acpi_smb_hc_init+0x0/0x18 returned 0 after 345 usecs calling acpi_sbs_init+0x0/0x4f @ 1 initcall acpi_sbs_init+0x0/0x4f returned 0 after 341 usecs calling xenfs_init+0x0/0x2d @ 1 XENFS: not registering filesystem on non-xen platform initcall xenfs_init+0x0/0x2d returned 0 after 4788 usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs calling hyper_sysfs_init+0x0/0xfb @ 1 initcall hyper_sysfs_init+0x0/0xfb returned -19 after 0 usecs calling regulator_virtual_consumer_init+0x0/0x12 @ 1 initcall regulator_virtual_consumer_init+0x0/0x12 returned 0 after 276 usecs calling rand_initialize+0x0/0x31 @ 1 initcall rand_initialize+0x0/0x31 returned 0 after 28 usecs calling tty_init+0x0/0xf5 @ 1 PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 initcall tty_init+0x0/0xf5 returned 0 after 238267 usecs calling pty_init+0x0/0xd @ 1 PM: Adding info for No Bus:ptmx initcall pty_init+0x0/0xd returned 0 after 3386 usecs calling sysrq_init+0x0/0x25 @ 1 initcall sysrq_init+0x0/0x25 returned 0 after 42 usecs calling xen_init+0x0/0x93 @ 1 initcall xen_init+0x0/0x93 returned -19 after 0 usecs calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 254 usecs calling raw_init+0x0/0xe5 @ 1 PM: Adding info for No Bus:rawctl initcall raw_init+0x0/0xe5 returned 0 after 3749 usecs calling applicom_init+0x0/0x4c8 @ 1 Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. initcall applicom_init+0x0/0x4c8 returned -6 after 16570 usecs initcall applicom_init+0x0/0x4c8 returned with error code -6 calling hpet_init+0x0/0x6a @ 1 PM: Adding info for No Bus:hpet initcall hpet_init+0x0/0x6a returned 0 after 3587 usecs calling mwave_init+0x0/0x1dd @ 1 smapi::smapi_init, ERROR invalid usSmapiID mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine mwave: mwavedd::mwave_init: Error: Failed to initialize board data mwave: mwavedd::mwave_init: Error: Failed to initialize initcall mwave_init+0x0/0x1dd returned -5 after 22723 usecs initcall mwave_init+0x0/0x1dd returned with error code -5 calling ipmi_init_msghandler_mod+0x0/0xd @ 1 ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 3484 usecs calling hangcheck_init+0x0/0x9b @ 1 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). initcall hangcheck_init+0x0/0x9b returned 0 after 10503 usecs calling init_tis+0x0/0x8e @ 1 initcall init_tis+0x0/0x8e returned 0 after 279 usecs calling init_atmel+0x0/0x182 @ 1 initcall init_atmel+0x0/0x182 returned -19 after 595 usecs calling serial8250_init+0x0/0x143 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled PM: Adding info for platform:serial8250 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PM: Adding info for No Bus:ttyS0 PM: Adding info for No Bus:ttyS1 PM: Adding info for No Bus:ttyS2 PM: Adding info for No Bus:ttyS3 initcall serial8250_init+0x0/0x143 returned 0 after 28157 usecs calling serial8250_pnp_init+0x0/0x12 @ 1 PM: Removing info for No Bus:ttyS0 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PM: Adding info for No Bus:ttyS0 initcall serial8250_pnp_init+0x0/0x12 returned 0 after 12094 usecs calling serial8250_pci_init+0x0/0x1b @ 1 initcall serial8250_pci_init+0x0/0x1b returned 0 after 330 usecs calling jsm_init_module+0x0/0x45 @ 1 initcall jsm_init_module+0x0/0x45 returned 0 after 389 usecs calling floppy_init+0x0/0x5c4 @ 1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PM: Adding info for platform:floppy.0 PM: Adding info for No Bus:fd0 PM: Adding info for No Bus:2:0 initcall floppy_init+0x0/0x5c4 returned 0 after 34334 usecs calling cpqarray_init+0x0/0x6b @ 1 Compaq SMART2 Driver (v 2.6.0) initcall cpqarray_init+0x0/0x6b returned -19 after 3496 usecs calling cciss_init+0x0/0x9e @ 1 HP CISS Driver (v 3.6.20) initcall cciss_init+0x0/0x9e returned 0 after 3123 usecs calling DAC960_init_module+0x0/0x4d @ 1 PM: Adding info for No Bus:dac960_gam initcall DAC960_init_module+0x0/0x4d returned 0 after 4192 usecs calling ub_init+0x0/0x8e @ 1 usbcore: registered new interface driver ub initcall ub_init+0x0/0x8e returned 0 after 4329 usecs calling xlblk_init+0x0/0x7a @ 1 initcall xlblk_init+0x0/0x7a returned -19 after 0 usecs calling ibmasm_init+0x0/0x64 @ 1 ibmasm: IBM ASM Service Processor Driver version 1.0 loaded initcall ibmasm_init+0x0/0x64 returned 0 after 5703 usecs calling phantom_init+0x0/0x10b @ 1 Phantom Linux Driver, version n0.9.8, init OK initcall phantom_init+0x0/0x10b returned 0 after 4737 usecs calling enclosure_init+0x0/0x19 @ 1 initcall enclosure_init+0x0/0x19 returned 0 after 247 usecs calling init_kgdbts+0x0/0x16 @ 1 initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs calling ilo_init+0x0/0x95 @ 1 initcall ilo_init+0x0/0x95 returned 0 after 625 usecs calling mac_hid_init+0x0/0xb @ 1 PM: Adding info for No Bus:input2 input: Macintosh mouse button emulation as /class/input/input2 initcall mac_hid_init+0x0/0xb returned 0 after 9274 usecs calling scsi_tgt_init+0x0/0x86 @ 1 PM: Adding info for No Bus:tgt initcall scsi_tgt_init+0x0/0x86 returned 0 after 3404 usecs calling raid_init+0x0/0x12 @ 1 initcall raid_init+0x0/0x12 returned 0 after 259 usecs calling spi_transport_init+0x0/0x79 @ 1 initcall spi_transport_init+0x0/0x79 returned 0 after 553 usecs calling fc_transport_init+0x0/0x4c @ 1 initcall fc_transport_init+0x0/0x4c returned 0 after 1026 usecs calling iscsi_transport_init+0x0/0x14f @ 1 Loading iSCSI transport class v2.0-870. initcall iscsi_transport_init+0x0/0x14f returned 0 after 5164 usecs calling sas_transport_init+0x0/0xcc @ 1 initcall sas_transport_init+0x0/0xcc returned 0 after 1494 usecs calling sas_class_init+0x0/0x31 @ 1 initcall sas_class_init+0x0/0x31 returned 0 after 22 usecs calling scsi_dh_init+0x0/0x3f @ 1 initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs calling libfc_init+0x0/0x73 @ 1 initcall libfc_init+0x0/0x73 returned 0 after 88 usecs calling fnic_init_module+0x0/0x1e9 @ 1 fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121 initcall fnic_init_module+0x0/0x1e9 returned 0 after 4429 usecs calling iscsi_sw_tcp_init+0x0/0x42 @ 1 PM: Adding info for No Bus:tcp iscsi: registered transport (tcp) initcall iscsi_sw_tcp_init+0x0/0x42 returned 0 after 6390 usecs calling BusLogic_init+0x0/0x5df @ 1 initcall BusLogic_init+0x0/0x5df returned 0 after 178 usecs calling arcmsr_module_init+0x0/0x20 @ 1 initcall arcmsr_module_init+0x0/0x20 returned 0 after 293 usecs calling ahc_linux_init+0x0/0x65 @ 1 initcall ahc_linux_init+0x0/0x65 returned 0 after 424 usecs calling ahd_linux_init+0x0/0x80 @ 1 initcall ahd_linux_init+0x0/0x80 returned 0 after 386 usecs calling aac_init+0x0/0x73 @ 1 Adaptec aacraid driver 1.1-5[2461]-ms initcall aac_init+0x0/0x73 returned 0 after 3826 usecs calling ips_module_init+0x0/0x67 @ 1 initcall ips_module_init+0x0/0x67 returned -19 after 590 usecs calling init_this_scsi_driver+0x0/0xe3 @ 1 scsi: Detection failed (no card) initcall init_this_scsi_driver+0x0/0xe3 returned -19 after 4061 usecs calling qla1280_init+0x0/0x1b @ 1 initcall qla1280_init+0x0/0x1b returned 0 after 287 usecs calling lpfc_init+0x0/0xcd @ 1 Emulex LightPulse Fibre Channel SCSI driver 8.3.4 Copyright(c) 2004-2009 Emulex. All rights reserved. initcall lpfc_init+0x0/0xcd returned 0 after 9478 usecs calling init_this_scsi_driver+0x0/0xe3 @ 1 initcall init_this_scsi_driver+0x0/0xe3 returned -19 after 37 usecs calling dc395x_module_init+0x0/0x1b @ 1 initcall dc395x_module_init+0x0/0x1b returned 0 after 285 usecs calling megaraid_init+0x0/0xbc @ 1 initcall megaraid_init+0x0/0xbc returned 0 after 352 usecs calling megasas_init+0x0/0x16e @ 1 megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 initcall megasas_init+0x0/0x16e returned 0 after 4893 usecs calling _scsih_init+0x0/0x119 @ 1 mpt2sas version 02.100.03.00 loaded PM: Adding info for No Bus:mpt2ctl initcall _scsih_init+0x0/0x119 returned 0 after 7225 usecs calling initio_init_driver+0x0/0x1b @ 1 initcall initio_init_driver+0x0/0x1b returned 0 after 308 usecs calling inia100_init+0x0/0x1b @ 1 initcall inia100_init+0x0/0x1b returned 0 after 310 usecs calling tw_init+0x0/0x30 @ 1 3ware Storage Controller device driver for Linux v1.26.02.002. initcall tw_init+0x0/0x30 returned 0 after 5860 usecs calling twa_init+0x0/0x30 @ 1 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. initcall twa_init+0x0/0x30 returned 0 after 6338 usecs calling stex_init+0x0/0x30 @ 1 stex: Promise SuperTrak EX Driver version: 4.6.0000.3 initcall stex_init+0x0/0x30 returned 0 after 5096 usecs calling pmcraid_init+0x0/0x13b @ 1 initcall pmcraid_init+0x0/0x13b returned 0 after 671 usecs calling init_sd+0x0/0x161 @ 1 initcall init_sd+0x0/0x161 returned 0 after 728 usecs calling init_sr+0x0/0x46 @ 1 initcall init_sr+0x0/0x46 returned 0 after 275 usecs calling init_sg+0x0/0x125 @ 1 initcall init_sg+0x0/0x125 returned 0 after 461 usecs calling ahci_init+0x0/0x1b @ 1 initcall ahci_init+0x0/0x1b returned 0 after 390 usecs calling k2_sata_init+0x0/0x1b @ 1 initcall k2_sata_init+0x0/0x1b returned 0 after 305 usecs calling piix_init+0x0/0x29 @ 1 ata_piix 0000:00:1f.1: version 2.13 IOAPIC[0]: Set routing entry (2-22 -> 0x59 -> IRQ 22 Mode:1 Active:1) ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix PM: Adding info for No Bus:host0 PM: Adding info for No Bus:host0 scsi1 : ata_piix PM: Adding info for No Bus:host1 PM: Adding info for No Bus:host1 ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 IOAPIC[0]: Set routing entry (2-23 -> 0x61 -> IRQ 23 Mode:1 Active:1) ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 calling 1_async_port_probe+0x0/0xbb @ 827 calling 2_async_port_probe+0x0/0xbb @ 828 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix PM: Adding info for No Bus:host2 PM: Adding info for No Bus:host2 scsi3 : ata_piix PM: Adding info for No Bus:host3 PM: Adding info for No Bus:host3 ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 23 ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 23 calling 3_async_port_probe+0x0/0xbb @ 833 calling 4_async_port_probe+0x0/0xbb @ 834 initcall piix_init+0x0/0x29 returned 0 after 175181 usecs calling pdc_ata_init+0x0/0x1b @ 1 initcall pdc_ata_init+0x0/0x1b returned 0 after 326 usecs calling sil24_init+0x0/0x1b @ 1 initcall sil24_init+0x0/0x1b returned 0 after 317 usecs calling nv_init+0x0/0x1b @ 1 initcall nv_init+0x0/0x1b returned 0 after 369 usecs calling amd_init+0x0/0x1b @ 1 initcall amd_init+0x0/0x1b returned 0 after 311 usecs calling atp867x_init+0x0/0x1b @ 1 initcall atp867x_init+0x0/0x1b returned 0 after 309 usecs calling cmd64x_init+0x0/0x1b @ 1 initcall cmd64x_init+0x0/0x1b returned 0 after 316 usecs calling cs5520_init+0x0/0x1b @ 1 initcall cs5520_init+0x0/0x1b returned 0 after 307 usecs calling it8213_init+0x0/0x1b @ 1 initcall it8213_init+0x0/0x1b returned 0 after 309 usecs calling ninja32_init+0x0/0x1b @ 1 initcall ninja32_init+0x0/0x1b returned 0 after 308 usecs calling ns87415_init+0x0/0x1b @ 1 initcall ns87415_init+0x0/0x1b returned 0 after 304 usecs calling marvell_init+0x0/0x1b @ 1 initcall marvell_init+0x0/0x1b returned 0 after 368 usecs calling oldpiix_init+0x0/0x1b @ 1 ata1.00: unsupported CDB len async_waiting @ 828 initcall oldpiix_init+0x0/0x1b returned 0 after 16153 usecs calling pdc2027x_init+0x0/0x1b @ 1 initcall pdc2027x_init+0x0/0x1b returned 0 after 305 usecs calling radisys_init+0x0/0x1b @ 1 initcall radisys_init+0x0/0x1b returned 0 after 358 usecs calling sil680_init+0x0/0x1b @ 1 initcall sil680_init+0x0/0x1b returned 0 after 313 usecs calling via_init+0x0/0x1b @ 1 async_waiting @ 834 initcall via_init+0x0/0x1b returned 0 after 13206 usecs calling spi_gpio_init+0x0/0x19 @ 1 initcall spi_gpio_init+0x0/0x19 returned -19 after 557 usecs calling e1000_init_module+0x0/0x6b @ 1 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. initcall e1000_init_module+0x0/0x6b returned 0 after 9562 usecs calling ipg_init_module+0x0/0x1b @ 1 initcall ipg_init_module+0x0/0x1b returned 0 after 312 usecs calling atl1c_init_module+0x0/0x1b @ 1 ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) initcall atl1c_init_module+0x0/0x1b returned 0 after 10278 usecs calling enic_init_module+0x0/0x37 @ 1 enic: Cisco 10G Ethernet Driver, ver 1.1.0.100 initcall enic_init_module+0x0/0x37 returned 0 after 4660 usecs calling ne2k_pci_init+0x0/0x1b @ 1 initcall ne2k_pci_init+0x0/0x1b returned 0 after 542 usecs calling e100_init_module+0x0/0x5d @ 1 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation initcall e100_init_module+0x0/0x5d returned 0 after 9302 usecs calling sis900_init_module+0x0/0x1b @ 1 initcall sis900_init_module+0x0/0x1b returned 0 after 387 usecs calling yellowfin_init+0x0/0x1b @ 1 ata3.00: configured for UDMA/133 async_waiting @ 833 initcall yellowfin_init+0x0/0x1b returned 0 after 5340 usecs calling ns83820_init+0x0/0x29 @ 1 ns83820.c: National Semiconductor DP83820 10/100/1000 driver. initcall ns83820_init+0x0/0x29 returned 0 after 5818 usecs calling fealnx_init+0x0/0x1b @ 1 initcall fealnx_init+0x0/0x1b returned 0 after 308 usecs calling tg3_init+0x0/0x1b @ 1 initcall tg3_init+0x0/0x1b returned 0 after 309 usecs calling skge_init_module+0x0/0x1b @ 1 initcall skge_init_module+0x0/0x1b returned 0 after 313 usecs calling sky2_init_module+0x0/0x29 @ 1 sky2 driver version 1.25 sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sky2 0000:02:00.0: setting latency timer to 64 sky2 0000:02:00.0: Yukon-2 EC chip revision 2 PM: Adding info for No Bus:eth0 sky2 eth0: addr 00:15:f2:e6:8e:6b initcall sky2_init_module+0x0/0x29 returned 0 after 23877 usecs calling cicada_init+0x0/0x3c @ 1 initcall cicada_init+0x0/0x3c returned 0 after 552 usecs calling lxt_init+0x0/0x3c @ 1 initcall lxt_init+0x0/0x3c returned 0 after 562 usecs calling broadcom_init+0x0/0x143 @ 1 initcall broadcom_init+0x0/0x143 returned 0 after 2810 usecs calling ip175c_init+0x0/0x12 @ 1 initcall ip175c_init+0x0/0x12 returned 0 after 278 usecs calling realtek_init+0x0/0x12 @ 1 initcall realtek_init+0x0/0x12 returned 0 after 273 usecs calling et1011c_init+0x0/0x12 @ 1 initcall et1011c_init+0x0/0x12 returned 0 after 270 usecs calling fixed_mdio_bus_init+0x0/0xf7 @ 1 PM: Adding info for platform:Fixed MDIO bus.0 PM: Adding info for No Bus:0 Fixed MDIO Bus: probed initcall fixed_mdio_bus_init+0x0/0xf7 returned 0 after 9796 usecs calling sundance_init+0x0/0x1b @ 1 initcall sundance_init+0x0/0x1b returned 0 after 314 usecs calling hamachi_init+0x0/0x1b @ 1 initcall hamachi_init+0x0/0x1b returned 0 after 300 usecs calling net_olddevs_init+0x0/0x2f @ 1 initcall net_olddevs_init+0x0/0x2f returned 0 after 463 usecs calling hp100_module_init+0x0/0x1b @ 1 initcall hp100_module_init+0x0/0x1b returned 0 after 376 usecs calling init_nic+0x0/0x1b @ 1 initcall init_nic+0x0/0x1b returned 0 after 305 usecs calling ql3xxx_init_module+0x0/0x1b @ 1 initcall ql3xxx_init_module+0x0/0x1b returned 0 after 304 usecs calling qlge_init_module+0x0/0x1b @ 1 initcall qlge_init_module+0x0/0x1b returned 0 after 301 usecs calling ppp_init+0x0/0xf0 @ 1 PPP generic driver version 2.4.2 PM: Adding info for No Bus:ppp initcall ppp_init+0x0/0xf0 returned 0 after 6664 usecs calling ppp_sync_init+0x0/0x36 @ 1 initcall ppp_sync_init+0x0/0x36 returned 0 after 1 usecs calling ppp_mppe_init+0x0/0x110 @ 1 PPP MPPE Compression module registered initcall ppp_mppe_init+0x0/0x110 returned 0 after 4463 usecs calling pppox_init+0x0/0x12 @ 1 NET: Registered protocol family 24 initcall pppox_init+0x0/0x12 returned 0 after 3182 usecs calling pppoe_init+0x0/0x94 @ 1 initcall pppoe_init+0x0/0x94 returned 0 after 94 usecs calling slip_init+0x0/0xc1 @ 1 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. initcall slip_init+0x0/0xc1 returned 0 after 17263 usecs calling netif_init+0x0/0x52 @ 1 initcall netif_init+0x0/0x52 returned -19 after 0 usecs calling rtl8139_init_module+0x0/0x1b @ 1 initcall rtl8139_init_module+0x0/0x1b returned 0 after 306 usecs calling tun_init+0x0/0x93 @ 1 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky PM: Adding info for No Bus:tun initcall tun_init+0x0/0x93 returned 0 after 11886 usecs calling rio_init+0x0/0x1b @ 1 initcall rio_init+0x0/0x1b returned 0 after 306 usecs calling amd8111e_init+0x0/0x1b @ 1 initcall amd8111e_init+0x0/0x1b returned 0 after 310 usecs calling myri10ge_init_module+0x0/0x74 @ 1 myri10ge: Version 1.5.0-1.432 initcall myri10ge_init_module+0x0/0x74 returned 0 after 3128 usecs calling mlx4_init+0x0/0xa2 @ 1 initcall mlx4_init+0x0/0xa2 returned 0 after 464 usecs calling mlx4_en_init+0x0/0x12 @ 1 initcall mlx4_en_init+0x0/0x12 returned 0 after 30 usecs calling enc28j60_init+0x0/0x23 @ 1 initcall enc28j60_init+0x0/0x23 returned 0 after 251 usecs calling tms_pci_init+0x0/0x1b @ 1 initcall tms_pci_init+0x0/0x1b returned 0 after 308 usecs calling catc_init+0x0/0x39 @ 1 usbcore: registered new interface driver catc catc: v2.8:CATC EL1210A NetMate USB Ethernet driver initcall catc_init+0x0/0x39 returned 0 after 9135 usecs calling kaweth_init+0x0/0x1b @ 1 usbcore: registered new interface driver kaweth initcall kaweth_init+0x0/0x1b returned 0 after 4596 usecs calling usb_rtl8150_init+0x0/0x29 @ 1 rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver usbcore: registered new interface driver rtl8150 initcall usb_rtl8150_init+0x0/0x29 returned 0 after 10226 usecs calling hso_init+0x0/0x1a7 @ 1 hso: drivers/net/usb/hso.c: 1.2 Option Wireless usbcore: registered new interface driver hso initcall hso_init+0x0/0x1a7 returned 0 after 8702 usecs calling cdc_init+0x0/0x1b @ 1 usbcore: registered new interface driver cdc_ether initcall cdc_init+0x0/0x1b returned 0 after 4845 usecs calling smsc95xx_init+0x0/0x1b @ 1 usbcore: registered new interface driver smsc95xx initcall smsc95xx_init+0x0/0x1b returned 0 after 4828 usecs calling net1080_init+0x0/0x1b @ 1 usbcore: registered new interface driver net1080 initcall net1080_init+0x0/0x1b returned 0 after 4693 usecs calling plusb_init+0x0/0x1b @ 1 usbcore: registered new interface driver plusb initcall plusb_init+0x0/0x1b returned 0 after 4529 usecs calling zaurus_init+0x0/0x1b @ 1 usbcore: registered new interface driver zaurus initcall zaurus_init+0x0/0x1b returned 0 after 4587 usecs calling mcs7830_init+0x0/0x1b @ 1 usbcore: registered new interface driver MOSCHIP usb-ethernet driver initcall mcs7830_init+0x0/0x1b returned 0 after 6362 usecs calling usbnet_init+0x0/0x2b @ 1 initcall usbnet_init+0x0/0x2b returned 0 after 7 usecs calling w840_init+0x0/0x29 @ 1 winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker http://www.scyld.com/network/drivers.html initcall w840_init+0x0/0x29 returned 0 after 11127 usecs calling tulip_init+0x0/0x33 @ 1 initcall tulip_init+0x0/0x33 returned 0 after 307 usecs calling init_netconsole+0x0/0x165 @ 1 console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x165 returned 0 after 5916 usecs calling i2o_iop_init+0x0/0x49 @ 1 I2O subsystem v1.325 i2o: max drivers = 8 initcall i2o_iop_init+0x0/0x49 returned 0 after 4977 usecs calling i2o_block_init+0x0/0x121 @ 1 I2O Block Device OSM v1.325 initcall i2o_block_init+0x0/0x121 returned 0 after 3257 usecs calling i2o_scsi_init+0x0/0x44 @ 1 I2O SCSI Peripheral OSM v1.316 initcall i2o_scsi_init+0x0/0x44 returned 0 after 3117 usecs calling fusion_init+0x0/0x13b @ 1 Fusion MPT base driver 3.04.12 Copyright (c) 1999-2008 LSI Corporation initcall fusion_init+0x0/0x13b returned 0 after 6523 usecs calling mptfc_init+0x0/0xf3 @ 1 Fusion MPT FC Host driver 3.04.12 initcall mptfc_init+0x0/0xf3 returned 0 after 3402 usecs calling cdrom_init+0x0/0x8 @ 1 initcall cdrom_init+0x0/0x8 returned 0 after 0 usecs calling uwb_subsys_init+0x0/0x51 @ 1 initcall uwb_subsys_init+0x0/0x51 returned 0 after 300 usecs calling mon_init+0x0/0x116 @ 1 PM: Adding info for No Bus:usbmon0 initcall mon_init+0x0/0x116 returned 0 after 3924 usecs calling ehci_hcd_init+0x0/0xbd @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver IOAPIC[0]: Set routing entry (2-20 -> 0x69 -> IRQ 20 Mode:1 Active:1) ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller PM: Adding info for No Bus:usbmon1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd7cff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 PM: Adding info for usb:usb1 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 initcall ehci_hcd_init+0x0/0xbd returned 0 after 92834 usecs calling isp116x_init+0x0/0x3e @ 1 116x: driver isp116x-hcd, 03 Nov 2005 initcall isp116x_init+0x0/0x3e returned 0 after 3722 usecs calling ohci_hcd_mod_init+0x0/0x8e @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver initcall ohci_hcd_mod_init+0x0/0x8e returned 0 after 5199 usecs calling uhci_hcd_init+0x0/0xbe @ 1 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller PM: Adding info for No Bus:usbmon2 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007000 PM: Adding info for usb:usb2 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 IOAPIC[0]: Set routing entry (2-17 -> 0x71 -> IRQ 17 Mode:1 Active:1) uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller PM: Adding info for No Bus:usbmon3 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007400 PM: Adding info for usb:usb3 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 IOAPIC[0]: Set routing entry (2-18 -> 0x79 -> IRQ 18 Mode:1 Active:1) uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller PM: Adding info for No Bus:usbmon4 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007800 PM: Adding info for usb:usb4 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller PM: Adding info for No Bus:usbmon5 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008000 PM: Adding info for usb:usb5 usb usb5: configuration #1 chosen from 1 choice PM: Adding info for usb:5-0:1.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 initcall uhci_hcd_init+0x0/0xbe returned 0 after 228120 usecs calling isp1760_init+0x0/0x50 @ 1 initcall isp1760_init+0x0/0x50 returned 0 after 621 usecs calling c67x00_init+0x0/0x12 @ 1 initcall c67x00_init+0x0/0x12 returned 0 after 288 usecs calling usb_usual_init+0x0/0x3f @ 1 usbcore: registered new interface driver libusual initcall usb_usual_init+0x0/0x3f returned 0 after 4922 usecs calling usb_mdc800_init+0x0/0x3a6 @ 1 usbcore: registered new interface driver mdc800 mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera initcall usb_mdc800_init+0x0/0x3a6 returned 0 after 11071 usecs calling microtek_drv_init+0x0/0x1b @ 1 usbcore: registered new interface driver microtekX6 initcall microtek_drv_init+0x0/0x1b returned 0 after 4939 usecs calling adu_init+0x0/0x96 @ 1 usbcore: registered new interface driver adutux adutux adutux (see www.ontrak.net) v0.0.13 adutux is an experimental driver. Use at your own risk initcall adu_init+0x0/0x96 returned 0 after 13431 usecs calling appledisplay_init+0x0/0x59 @ 1 usbcore: registered new interface driver appledisplay initcall appledisplay_init+0x0/0x59 returned 0 after 5277 usecs calling cypress_init+0x0/0x3a @ 1 usbcore: registered new interface driver cypress_cy7c63 initcall cypress_init+0x0/0x3a returned 0 after 5276 usecs calling emi62_init+0x0/0x38 @ 1 usbcore: registered new interface driver emi62 - firmware loader initcall emi62_init+0x0/0x38 returned 0 after 6047 usecs calling iowarrior_init+0x0/0x1b @ 1 usbcore: registered new interface driver iowarrior initcall iowarrior_init+0x0/0x1b returned 0 after 4921 usecs calling ld_usb_init+0x0/0x3a @ 1 usbcore: registered new interface driver ldusb initcall ld_usb_init+0x0/0x3a returned 0 after 4581 usecs calling lego_usb_tower_init+0x0/0x8b @ 1 usbcore: registered new interface driver legousbtower legousbtower: v0.96:LEGO USB Tower Driver initcall lego_usb_tower_init+0x0/0x8b returned 0 after 8982 usecs calling usb_sevseg_init+0x0/0x3a @ 1 usbcore: registered new interface driver usbsevseg initcall usb_sevseg_init+0x0/0x3a returned 0 after 4854 usecs calling i8042_init+0x0/0xad @ 1 PNP: No PS/2 controller found. Probing ports directly. PM: Adding info for platform:i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 PM: Adding info for serio:serio0 PM: Adding info for serio:serio1 initcall i8042_init+0x0/0xad returned 0 after 26526 usecs calling serio_raw_init+0x0/0x1b @ 1 initcall serio_raw_init+0x0/0x1b returned 0 after 438 usecs calling mousedev_init+0x0/0x8d @ 1 PM: Adding info for No Bus:mice PM: Adding info for No Bus:mouse0 PM: Adding info for No Bus:psaux mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x8d returned 0 after 14489 usecs calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after 302 usecs calling lkkbd_init+0x0/0x1b @ 1 initcall lkkbd_init+0x0/0x1b returned 0 after 422 usecs calling nkbd_init+0x0/0x1b @ 1 initcall nkbd_init+0x0/0x1b returned 0 after 303 usecs calling skbd_init+0x0/0x1b @ 1 initcall skbd_init+0x0/0x1b returned 0 after 321 usecs calling bcm5974_init+0x0/0x1b @ 1 usbcore: registered new interface driver bcm5974 initcall bcm5974_init+0x0/0x1b returned 0 after 5215 usecs calling sermouse_init+0x0/0x1b @ 1 initcall sermouse_init+0x0/0x1b returned 0 after 328 usecs calling kbtab_init+0x0/0x38 @ 1 usbcore: registered new interface driver kbtab kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver initcall kbtab_init+0x0/0x38 returned 0 after 9099 usecs calling fujitsu_init+0x0/0x1b @ 1 initcall fujitsu_init+0x0/0x1b returned 0 after 649 usecs calling mk712_init+0x0/0x1ea @ 1 mk712: device not present initcall mk712_init+0x0/0x1ea returned -19 after 2486 usecs calling powermate_init+0x0/0x1b @ 1 usbcore: registered new interface driver powermate initcall powermate_init+0x0/0x1b returned 0 after 4845 usecs calling rotary_encoder_init+0x0/0x12 @ 1 initcall rotary_encoder_init+0x0/0x12 returned 0 after 256 usecs calling videodev_init+0x0/0x89 @ 1 Linux video capture interface: v2.00 initcall videodev_init+0x0/0x89 returned 0 after 3608 usecs calling w1_init+0x0/0xa9 @ 1 Driver for 1-wire Dallas network protocol. initcall w1_init+0x0/0xa9 returned 0 after 4728 usecs calling matrox_w1_init+0x0/0x1b @ 1 initcall matrox_w1_init+0x0/0x1b returned 0 after 332 usecs calling ds_init+0x0/0x3f @ 1 usbcore: registered new interface driver DS9490R initcall ds_init+0x0/0x3f returned 0 after 4742 usecs calling w1_gpio_init+0x0/0x19 @ 1 initcall w1_gpio_init+0x0/0x19 returned -19 after 512 usecs calling w1_therm_init+0x0/0x32 @ 1 initcall w1_therm_init+0x0/0x32 returned 0 after 48 usecs calling w1_ds2760_init+0x0/0x2c @ 1 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko initcall w1_ds2760_init+0x0/0x2c returned 0 after 7509 usecs calling ds2760_battery_init+0x0/0x12 @ 1 initcall ds2760_battery_init+0x0/0x12 returned 0 after 255 usecs calling wdtpci_init+0x0/0x1b @ 1 initcall wdtpci_init+0x0/0x1b returned 0 after 305 usecs calling advwdt_init+0x0/0x5f @ 1 WDT driver for Advantech single board computer initialising. PM: Adding info for platform:advantechwdt PM: Adding info for No Bus:watchdog advantechwdt: initialized. timeout=60 sec (nowayout=0) initcall advwdt_init+0x0/0x5f returned 0 after 18542 usecs calling sc520_wdt_init+0x0/0xef @ 1 sc520_wdt: cannot register miscdev on minor=130 (err=-16) initcall sc520_wdt_init+0x0/0xef returned -16 after 5234 usecs initcall sc520_wdt_init+0x0/0xef returned with error code -16 calling it87_wdt_init+0x0/0x4c8 @ 1 IT87 WDT: no device initcall it87_wdt_init+0x0/0x4c8 returned -19 after 1937 usecs calling pc87413_init+0x0/0x91 @ 1 pc87413 WDT: Version 1.1 at io 0x2E pc87413 WDT: cannot register miscdev on minor=130 (err=-16) initcall pc87413_init+0x0/0x91 returned -16 after 8598 usecs initcall pc87413_init+0x0/0x91 returned with error code -16 calling sbc60xxwdt_init+0x0/0x185 @ 1 sbc60xxwdt: I/O address 0x0443 already in use initcall sbc60xxwdt_init+0x0/0x185 returned -5 after 4137 usecs initcall sbc60xxwdt_init+0x0/0x185 returned with error code -5 calling cpu5wdt_init_module+0x0/0x10 @ 1 cpu5wdt: sorry, was my fault cpu5wdt: misc_register failed initcall cpu5wdt_init_module+0x0/0x10 returned -16 after 5459 usecs initcall cpu5wdt_init_module+0x0/0x10 returned with error code -16 calling w83977f_wdt_init+0x0/0x149 @ 1 W83977F WDT: W83977F WDT driver, v1.00 W83977F WDT: cannot register miscdev on minor=130 (err=-16) initcall w83977f_wdt_init+0x0/0x149 returned -16 after 8838 usecs initcall w83977f_wdt_init+0x0/0x149 returned with error code -16 calling bpa10x_init+0x0/0x30 @ 1 Bluetooth: Digianswer Bluetooth USB driver ver 0.10 usbcore: registered new interface driver bpa10x initcall bpa10x_init+0x0/0x30 returned 0 after 9203 usecs calling bfusb_init+0x0/0x54 @ 1 Bluetooth: BlueFRITZ! USB driver ver 1.2 usbcore: registered new interface driver bfusb initcall bfusb_init+0x0/0x54 returned 0 after 8194 usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 2875 usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after 2685 usecs calling i7300_idle_init+0x0/0x17e @ 1 initcall i7300_idle_init+0x0/0x17e returned -19 after 187 usecs calling memstick_init+0x0/0x85 @ 1 initcall memstick_init+0x0/0x85 returned 0 after 625 usecs calling jmb38x_ms_init+0x0/0x1b @ 1 initcall jmb38x_ms_init+0x0/0x1b returned 0 after 374 usecs calling timer_trig_init+0x0/0x12 @ 1 initcall timer_trig_init+0x0/0x12 returned 0 after 61 usecs calling ib_core_init+0x0/0x44 @ 1 initcall ib_core_init+0x0/0x44 returned 0 after 241 usecs calling ib_mad_init_module+0x0/0xcd @ 1 initcall ib_mad_init_module+0x0/0xcd returned 0 after 27 usecs calling ib_sa_init+0x0/0x67 @ 1 initcall ib_sa_init+0x0/0x67 returned 0 after 89 usecs calling ib_cm_init+0x0/0x157 @ 1 initcall ib_cm_init+0x0/0x157 returned 0 after 393 usecs calling iw_cm_init+0x0/0x35 @ 1 initcall iw_cm_init+0x0/0x35 returned 0 after 89 usecs calling ib_umad_init+0x0/0xcb @ 1 initcall ib_umad_init+0x0/0xcb returned 0 after 262 usecs calling infinipath_init+0x0/0xc5 @ 1 initcall infinipath_init+0x0/0xc5 returned 0 after 480 usecs calling efivars_init+0x0/0x239 @ 1 initcall efivars_init+0x0/0x239 returned -19 after 0 usecs calling ibft_init+0x0/0x19b @ 1 No iBFT detected. initcall ibft_init+0x0/0x19b returned 0 after 1826 usecs calling hid_init+0x0/0x66 @ 1 initcall hid_init+0x0/0x66 returned 0 after 653 usecs calling usb_kbd_init+0x0/0x38 @ 1 usbcore: registered new interface driver usbkbd usbkbd: :USB HID Boot Protocol keyboard driver initcall usb_kbd_init+0x0/0x38 returned 0 after 8905 usecs calling usb_mouse_init+0x0/0x38 @ 1 usbcore: registered new interface driver usbmouse usbmouse: v1.6:USB HID Boot Protocol mouse driver initcall usb_mouse_init+0x0/0x38 returned 0 after 9289 usecs calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 251 usecs calling init_soundcore+0x0/0x95 @ 1 initcall init_soundcore+0x0/0x95 returned 0 after 280 usecs calling alsa_sound_init+0x0/0xa4 @ 1 Advanced Linux Sound Architecture Driver Version 1.0.21. initcall alsa_sound_init+0x0/0xa4 returned 0 after 5344 usecs calling alsa_hwdep_init+0x0/0x64 @ 1 initcall alsa_hwdep_init+0x0/0x64 returned 0 after 62 usecs calling alsa_timer_init+0x0/0xd7 @ 1 PM: Adding info for No Bus:timer initcall alsa_timer_init+0x0/0xd7 returned 0 after 3472 usecs calling snd_hrtimer_init+0x0/0x108 @ 1 initcall snd_hrtimer_init+0x0/0x108 returned 0 after 26 usecs calling alsa_pcm_init+0x0/0x6c @ 1 initcall alsa_pcm_init+0x0/0x6c returned 0 after 43 usecs calling snd_mem_init+0x0/0x2c @ 1 initcall snd_mem_init+0x0/0x2c returned 0 after 19 usecs calling alsa_rawmidi_init+0x0/0xa4 @ 1 initcall alsa_rawmidi_init+0x0/0xa4 returned 0 after 13 usecs calling alsa_mixer_oss_init+0x0/0x3d @ 1 initcall alsa_mixer_oss_init+0x0/0x3d returned 0 after 0 usecs calling alsa_opl3_init+0x0/0x8 @ 1 initcall alsa_opl3_init+0x0/0x8 returned 0 after 0 usecs calling alsa_mpu401_uart_init+0x0/0x8 @ 1 initcall alsa_mpu401_uart_init+0x0/0x8 returned 0 after 0 usecs calling alsa_card_mpu401_init+0x0/0xc1 @ 1 initcall alsa_card_mpu401_init+0x0/0xc1 returned -19 after 1106 usecs calling alsa_vx_core_init+0x0/0x8 @ 1 initcall alsa_vx_core_init+0x0/0x8 returned 0 after 0 usecs calling alsa_sb_common_init+0x0/0x8 @ 1 initcall alsa_sb_common_init+0x0/0x8 returned 0 after 0 usecs calling alsa_card_als4000_init+0x0/0x1b @ 1 initcall alsa_card_als4000_init+0x0/0x1b returned 0 after 402 usecs calling alsa_card_atiixp_init+0x0/0x1b @ 1 initcall alsa_card_atiixp_init+0x0/0x1b returned 0 after 371 usecs calling alsa_card_atiixp_init+0x0/0x1b @ 1 initcall alsa_card_atiixp_init+0x0/0x1b returned 0 after 371 usecs calling alsa_card_azf3328_init+0x0/0x1b @ 1 initcall alsa_card_azf3328_init+0x0/0x1b returned 0 after 432 usecs calling alsa_card_cmipci_init+0x0/0x1b @ 1 initcall alsa_card_cmipci_init+0x0/0x1b returned 0 after 367 usecs calling alsa_card_cs4281_init+0x0/0x1b @ 1 initcall alsa_card_cs4281_init+0x0/0x1b returned 0 after 375 usecs calling alsa_card_es1938_init+0x0/0x1b @ 1 initcall alsa_card_es1938_init+0x0/0x1b returned 0 after 376 usecs calling alsa_card_es1968_init+0x0/0x1b @ 1 initcall alsa_card_es1968_init+0x0/0x1b returned 0 after 371 usecs calling alsa_card_intel8x0m_init+0x0/0x1b @ 1 initcall alsa_card_intel8x0m_init+0x0/0x1b returned 0 after 368 usecs calling alsa_card_rme96_init+0x0/0x1b @ 1 initcall alsa_card_rme96_init+0x0/0x1b returned 0 after 373 usecs calling alsa_card_sonicvibes_init+0x0/0x1b @ 1 initcall alsa_card_sonicvibes_init+0x0/0x1b returned 0 after 370 usecs calling alsa_ac97_init+0x0/0x8 @ 1 initcall alsa_ac97_init+0x0/0x8 returned 0 after 0 usecs calling alsa_card_vortex_init+0x0/0x1b @ 1 initcall alsa_card_vortex_init+0x0/0x1b returned 0 after 382 usecs calling alsa_card_vortex_init+0x0/0x1b @ 1 initcall alsa_card_vortex_init+0x0/0x1b returned 0 after 372 usecs calling ct_card_init+0x0/0x1b @ 1 initcall ct_card_init+0x0/0x1b returned 0 after 373 usecs calling alsa_card_cs46xx_init+0x0/0x1b @ 1 initcall alsa_card_cs46xx_init+0x0/0x1b returned 0 after 374 usecs calling mod_init+0x0/0x1b @ 1 initcall mod_init+0x0/0x1b returned 0 after 441 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 373 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 371 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 372 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 370 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 375 usecs calling alsa_card_emu10k1_init+0x0/0x1b @ 1 initcall alsa_card_emu10k1_init+0x0/0x1b returned 0 after 426 usecs calling alsa_card_hifier_init+0x0/0x1b @ 1 initcall alsa_card_hifier_init+0x0/0x1b returned 0 after 379 usecs calling alsa_card_riptide_init+0x0/0x1b @ 1 initcall alsa_card_riptide_init+0x0/0x1b returned 0 after 374 usecs calling alsa_card_hammerfall_init+0x0/0x1b @ 1 initcall alsa_card_hammerfall_init+0x0/0x1b returned 0 after 373 usecs calling alsa_card_hdspm_init+0x0/0x1b @ 1 initcall alsa_card_hdspm_init+0x0/0x1b returned 0 after 372 usecs calling alsa_card_vx222_init+0x0/0x1b @ 1 initcall alsa_card_vx222_init+0x0/0x1b returned 0 after 439 usecs calling alsa_util_mem_init+0x0/0x8 @ 1 initcall alsa_util_mem_init+0x0/0x8 returned 0 after 0 usecs calling alsa_sound_last_init+0x0/0x6f @ 1 ALSA device list: No soundcards found. initcall alsa_sound_last_init+0x0/0x6f returned 0 after 3893 usecs calling flow_cache_init+0x0/0x11b @ 1 initcall flow_cache_init+0x0/0x11b returned 0 after 30 usecs calling pg_init+0x0/0x10e @ 1 pktgen 2.72: Packet Generator for packet performance testing. initcall pg_init+0x0/0x10e returned 0 after 5655 usecs calling llc_init+0x0/0x20 @ 1 initcall llc_init+0x0/0x20 returned 0 after 2 usecs calling llc2_init+0x0/0xa8 @ 1 NET: Registered protocol family 26 initcall llc2_init+0x0/0xa8 returned 0 after 3268 usecs calling snap_init+0x0/0x39 @ 1 initcall snap_init+0x0/0x39 returned 0 after 16 usecs calling rif_init+0x0/0x77 @ 1 initcall rif_init+0x0/0x77 returned 0 after 19 usecs calling ipip_init+0x0/0x71 @ 1 IPv4 over IPv4 tunneling driver PM: Adding info for No Bus:tunl0 initcall ipip_init+0x0/0x71 returned 0 after 6683 usecs calling ipgre_init+0x0/0xb3 @ 1 GRE over IPv4 tunneling driver PM: Adding info for No Bus:gre0 initcall ipgre_init+0x0/0xb3 returned 0 after 6513 usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after 32 usecs calling ipcomp4_init+0x0/0x66 @ 1 initcall ipcomp4_init+0x0/0x66 returned 0 after 3 usecs calling ipip_init+0x0/0x9c @ 1 initcall ipip_init+0x0/0x9c returned 0 after 20 usecs calling xfrm4_beet_init+0x0/0x17 @ 1 initcall xfrm4_beet_init+0x0/0x17 returned 0 after 1 usecs calling tunnel4_init+0x0/0x66 @ 1 initcall tunnel4_init+0x0/0x66 returned 0 after 1 usecs calling tcp_westwood_register+0x0/0x12 @ 1 TCP westwood registered initcall tcp_westwood_register+0x0/0x12 returned 0 after 2242 usecs calling hybla_register+0x0/0x12 @ 1 TCP hybla registered initcall hybla_register+0x0/0x12 returned 0 after 1996 usecs calling tcp_vegas_register+0x0/0x14 @ 1 TCP vegas registered initcall tcp_vegas_register+0x0/0x14 returned 0 after 1987 usecs calling tcp_illinois_register+0x0/0x12 @ 1 TCP illinois registered initcall tcp_illinois_register+0x0/0x12 returned 0 after 2249 usecs calling xfrm_user_init+0x0/0x4a @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x4a returned 0 after 3065 usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 3218 usecs calling br_init+0x0/0xad @ 1 initcall br_init+0x0/0xad returned 0 after 48 usecs calling ipx_init+0x0/0xf5 @ 1 NET: Registered protocol family 4 initcall ipx_init+0x0/0xf5 returned 0 after 3197 usecs calling atalk_init+0x0/0x88 @ 1 NET: Registered protocol family 5 initcall atalk_init+0x0/0x88 returned 0 after 3192 usecs calling can_init+0x0/0x120 @ 1 can: controller area network core (rev 20090105 abi 8) NET: Registered protocol family 29 initcall can_init+0x0/0x120 returned 0 after 8231 usecs calling raw_module_init+0x0/0x3d @ 1 can: raw protocol (rev 20090105) initcall raw_module_init+0x0/0x3d returned 0 after 3026 usecs calling bcm_module_init+0x0/0x5b @ 1 can: broadcast manager protocol (rev 20090105 t) initcall bcm_module_init+0x0/0x5b returned 0 after 4385 usecs calling af_rxrpc_init+0x0/0x1a0 @ 1 NET: Registered protocol family 33 initcall af_rxrpc_init+0x0/0x1a0 returned 0 after 3330 usecs calling rxkad_init+0x0/0x68 @ 1 RxRPC: Registered security type 2 'rxkad' initcall rxkad_init+0x0/0x68 returned 0 after 4626 usecs calling econet_proto_init+0x0/0x5b @ 1 NET: Registered protocol family 19 initcall econet_proto_init+0x0/0x5b returned 0 after 3316 usecs calling phonet_init+0x0/0x78 @ 1 NET: Registered protocol family 35 initcall phonet_init+0x0/0x78 returned 0 after 3279 usecs calling pep_register+0x0/0x17 @ 1 initcall pep_register+0x0/0x17 returned 0 after 5 usecs calling ieee802154_nl_init+0x0/0x8b @ 1 initcall ieee802154_nl_init+0x0/0x8b returned 0 after 95 usecs calling af_ieee802154_init+0x0/0x79 @ 1 NET: Registered protocol family 36 initcall af_ieee802154_init+0x0/0x79 returned 0 after 3200 usecs calling wimax_subsys_init+0x0/0x1f3 @ 1 initcall wimax_subsys_init+0x0/0x1f3 returned 0 after 61 usecs calling mce_debugfs_init+0x0/0x3c @ 1 initcall mce_debugfs_init+0x0/0x3c returned 0 after 39 usecs calling severities_debugfs_init+0x0/0x3c @ 1 initcall severities_debugfs_init+0x0/0x3c returned 0 after 18 usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs initcall hpet_insert_resource+0x0/0x23 returned with error code 1 calling lapic_insert_resource+0x0/0x3f @ 1 initcall lapic_insert_resource+0x0/0x3f returned 0 after 4 usecs calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0x65 @ 1 initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after 24 usecs calling init_oops_id+0x0/0x36 @ 1 initcall init_oops_id+0x0/0x36 returned 0 after 5 usecs calling disable_boot_consoles+0x0/0x45 @ 1 initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs calling pm_qos_power_init+0x0/0x61 @ 1 PM: Adding info for No Bus:cpu_dma_latency PM: Adding info for No Bus:network_latency PM: Adding info for No Bus:network_throughput initcall pm_qos_power_init+0x0/0x61 returned 0 after 12911 usecs calling software_resume+0x0/0x1d8 @ 1 PM: Resume from disk failed. initcall software_resume+0x0/0x1d8 returned -2 after 2746 usecs initcall software_resume+0x0/0x1d8 returned with error code -2 calling taskstats_init+0x0/0x95 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 2870 usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs calling fail_page_alloc_debugfs+0x0/0xe1 @ 1 initcall fail_page_alloc_debugfs+0x0/0xe1 returned 0 after 177 usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs calling failslab_debugfs_init+0x0/0x6b @ 1 initcall failslab_debugfs_init+0x0/0x6b returned 0 after 133 usecs calling kmemleak_late_init+0x0/0x89 @ 1 kmemleak: Kernel memory leak detector initialized initcall kmemleak_late_init+0x0/0x89 returned 0 after 4553 usecs calling init_ima+0x0/0x1a @ 1 kmemleak: Automatic memory scanning thread started No TPM chip found, activating TPM-bypass! initcall init_ima+0x0/0x1a returned 0 after 8469 usecs calling fail_make_request_debugfs+0x0/0x19 @ 1 initcall fail_make_request_debugfs+0x0/0x19 returned 0 after 416 usecs calling fail_io_timeout_debugfs+0x0/0x19 @ 1 initcall fail_io_timeout_debugfs+0x0/0x19 returned 0 after 258 usecs calling random32_reseed+0x0/0x56 @ 1 initcall random32_reseed+0x0/0x56 returned 0 after 7 usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 17 usecs calling pci_sysfs_init+0x0/0x51 @ 1 initcall pci_sysfs_init+0x0/0x51 returned 0 after 1271 usecs calling boot_wait_for_devices+0x0/0x19 @ 1 initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs calling regulator_init_complete+0x0/0x140 @ 1 initcall regulator_init_complete+0x0/0x140 returned 0 after 19 usecs calling seqgen_init+0x0/0xf @ 1 initcall seqgen_init+0x0/0xf returned 0 after 13 usecs calling late_resume_init+0x0/0x126 @ 1 Magic number: 13:700:373 vc vcsa1: hash matches initcall late_resume_init+0x0/0x126 returned 0 after 4753 usecs calling hd_init+0x0/0x302 @ 1 hd: no drives specified - use hd=cyl,head,sectors on kernel command line initcall hd_init+0x0/0x302 returned -1 after 6574 usecs initcall hd_init+0x0/0x302 returned with error code -1 calling scsi_complete_async_scans+0x0/0x166 @ 1 initcall scsi_complete_async_scans+0x0/0x166 returned 0 after 0 usecs calling edd_init+0x0/0x1c6 @ 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found initcall edd_init+0x0/0x1c6 returned 0 after 5238 usecs calling memmap_init+0x0/0xa3 @ 1 initcall memmap_init+0x0/0xa3 returned 0 after 362 usecs calling pci_mmcfg_late_insert_resources+0x0/0x41 @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x41 returned 0 after 9 usecs calling init_net_drop_monitor+0x0/0x142 @ 1 Initalizing network drop monitor service initcall init_net_drop_monitor+0x0/0x142 returned 0 after 3777 usecs calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after 2 usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after 5 usecs async_waiting @ 1 ata1.00: unsupported CDB len async_waiting @ 827 async_continuing @ 827 after 1 usec initcall 1_async_port_probe+0x0/0xbb returned 0 after 10219617 usecs async_continuing @ 828 after 10058431 usec initcall 2_async_port_probe+0x0/0xbb returned 0 after 10225528 usecs async_continuing @ 833 after 9899190 usec scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 PM: Adding info for No Bus:target2:0:0 PM: Adding info for scsi:2:0:0:0 PM: Adding info for No Bus:2:0:0:0 PM: Adding info for No Bus:2:0:0:0 calling 5_sd_probe_async+0x0/0x1ef @ 828 sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) PM: Adding info for No Bus:sg0 sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 initcall 3_async_port_probe+0x0/0xbb returned 0 after 10241310 usecs async_continuing @ 834 after 10078387 usec initcall 4_async_port_probe+0x0/0xbb returned 0 after 10247317 usecs async_continuing @ 1 after 6861372 usec async_waiting @ 1 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA PM: Adding info for No Bus:sda sda: sda1 sda2 sda3 sda4 < sda5 > PM: Adding info for No Bus:sda1 PM: Adding info for No Bus:sda2 PM: Adding info for No Bus:sda3 PM: Adding info for No Bus:sda4 PM: Adding info for No Bus:sda5 PM: Adding info for No Bus:8:0 sd 2:0:0:0: [sda] Attached SCSI disk initcall 5_sd_probe_async+0x0/0x1ef returned 0 after 127432 usecs async_continuing @ 1 after 89734 usec EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. async/2 used greatest stack depth: 4680 bytes left async/1 used greatest stack depth: 4200 bytes left kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:3. async_waiting @ 1 async_continuing @ 1 after 1 usec debug: unmapping init memory ffffffff81def000..ffffffff81eba000 Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. modprobe used greatest stack depth: 3424 bytes left BUG: unable to handle kernel NULL pointer dereference at 0000000000000240 IP: [] uart_close+0x2a/0x1f9 PGD 79a76067 PUD 79aa9067 PMD 0 Oops: 0000 [#1] DEBUG_PAGEALLOC last sysfs file: CPU 0 Modules linked in: Pid: 1110, comm: hwclock Not tainted 2.6.32-rc4 #1 System Product Name RIP: 0010:[] [] uart_close+0x2a/0x1f9 RSP: 0018:ffff880079aafb28 EFLAGS: 00010246 RAX: ffffffff812ed34c RBX: ffff8800799cd000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880079a7cc80 RDI: ffff8800799cd000 RBP: ffff880079aafb68 R08: ffffffff81d2ede0 R09: 0000000000000246 R10: ffff880079a7cc80 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800799cd000 R14: ffff880079a7cc80 R15: ffff880079a7cc80 FS: 00007f7ce2f906f0(0000) GS:ffffffff81b42000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000240 CR3: 0000000079aad000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process hwclock (pid: 1110, threadinfo ffff880079aae000, task ffff88007a6a0000) Stack: 00000000ffffffff ffff88007bb88df0 ffff880079aafb68 ffff8800799cd000 <0> 0000000000000000 0000000000000000 ffff880079a7cc80 ffff88007bb88df0 <0> ffff880079aafc48 ffffffff812c772a 0000000000000001 ffffffff81776706 Call Trace: [] tty_release_dev+0x1ad/0x4c0 [] ? mutex_unlock+0xe/0x10 [] ? mutex_unlock+0xe/0x10 [] ? uart_open+0xb1/0x26a [] __tty_open+0x37b/0x471 [] tty_open+0xe/0x11 [] chrdev_open+0x18d/0x1ae [] ? chrdev_open+0x0/0x1ae [] __dentry_open+0x1c1/0x333 [] nameidata_to_filp+0x41/0x52 [] do_filp_open+0x4d5/0x9ae [] ? native_sched_clock+0x3b/0x52 [] ? sched_clock+0x17/0x1b [] ? lock_release_holdtime+0x1c/0x10e [] ? _spin_unlock+0x2b/0x30 [] ? alloc_fd+0x112/0x124 [] do_sys_open+0x63/0x10f [] sys_open+0x20/0x22 [] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 0f 1f 44 00 00 f6 05 62 77 56 01 08 4c 8b a7 28 04 00 00 49 89 fd 49 89 f7 <4d> 8b b4 24 40 02 00 00 74 16 f6 05 4b 77 56 01 40 74 0d 80 3d RIP [] uart_close+0x2a/0x1f9 RSP CR2: 0000000000000240 ---[ end trace a9fc1313607e0850 ]--- sky2 eth0: enabling interface sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both CPA self-test: 4k 524192 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0 4k 524192 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0 4k 524192 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0 ok. end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 Buffer I/O error on device fd0, logical block 0 end_request: I/O error, dev fd0, sector 0 Buffer I/O error on device fd0, logical block 0 EXT3 FS on sda3, internal journal Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k rc.sysinit used greatest stack depth: 3376 bytes left warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Adding info for No Bus:vcs9 PM: Adding info for No Bus:vcsa9 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Adding info for No Bus:vcs10 PM: Adding info for No Bus:vcsa10 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Adding info for No Bus:vcs11 PM: Adding info for No Bus:vcsa11 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 kmemleak: 11 new suspected memory leaks (see /sys/kernel/debug/kmemleak) --RnlQjJ0d97Da+TV1 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=config # # Automatically generated make config: don't edit # Linux kernel version: 2.6.32-rc4 # Mon Oct 12 11:20:48 2009 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y # CONFIG_KERNEL_GZIP is not set CONFIG_KERNEL_BZIP2=y # CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y # CONFIG_TASK_XACCT is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set CONFIG_RCU_TRACE=y CONFIG_RCU_FANOUT=64 # CONFIG_RCU_FANOUT_EXACT is not set CONFIG_TREE_RCU_TRACE=y CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=21 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_GROUP_SCHED is not set CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y # CONFIG_CPUSETS is not set # CONFIG_CGROUP_CPUACCT is not set CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y CONFIG_MM_OWNER=y CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set CONFIG_IPC_NS=y CONFIG_USER_NS=y # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set # CONFIG_PCSPKR_PLATFORM is not set # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_SIGNALFD is not set CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=m CONFIG_OPROFILE_EVENT_MULTIPLEX=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=1 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_FREEZER=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_SMP is not set # CONFIG_X86_MPPARSE is not set CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_VSMP is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y CONFIG_XEN=y CONFIG_XEN_MAX_DOMAIN_MEMORY=32 CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set CONFIG_KVM_CLOCK=y # CONFIG_KVM_GUEST is not set CONFIG_PARAVIRT=y CONFIG_PARAVIRT_CLOCK=y CONFIG_PARAVIRT_DEBUG=y CONFIG_MEMTEST=y # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y # CONFIG_CPU_SUP_CENTAUR is not set # CONFIG_X86_DS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y CONFIG_CALGARY_IOMMU=y # CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set # CONFIG_AMD_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=1 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set CONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=y CONFIG_X86_THERMAL_VECTOR=y # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y # CONFIG_X86_MSR is not set CONFIG_X86_CPUID=y CONFIG_X86_CPU_DEBUG=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend # CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_MMU_NOTIFIER=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y CONFIG_HWPOISON_INJECT=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW_64K=y # CONFIG_MTRR is not set CONFIG_EFI=y # CONFIG_SECCOMP is not set CONFIG_CC_STACKPROTECTOR_ALL=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_COMPAT_VDSO=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" # CONFIG_CMDLINE_OVERRIDE is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_PM_VERBOSE=y CONFIG_CAN_PM_TRACE=y CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION_NVS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" # CONFIG_PM_RUNTIME is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y # CONFIG_ACPI_POWER_METER is not set CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y # CONFIG_ACPI_AC is not set CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=m # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set # CONFIG_ACPI_THERMAL is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_DEBUG=y CONFIG_ACPI_DEBUG_FUNC_TRACE=y # CONFIG_ACPI_PCI_SLOT is not set # CONFIG_X86_PM_TIMER is not set # CONFIG_ACPI_CONTAINER is not set CONFIG_ACPI_SBS=y CONFIG_SFI=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # # Memory power savings # CONFIG_I7300_IDLE_IOAT_CHANNEL=y CONFIG_I7300_IDLE=y # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m CONFIG_PCIEAER=y CONFIG_PCIE_ECRC=y CONFIG_PCIEAER_INJECT=y CONFIG_PCIEASPM=y CONFIG_PCIEASPM_DEBUG=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_HT_IRQ is not set CONFIG_PCI_IOV=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m CONFIG_YENTA_O2=y # CONFIG_YENTA_RICOH is not set CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y # CONFIG_YENTA_TOSHIBA is not set CONFIG_PD6729=m CONFIG_I82092=m CONFIG_PCCARD_NONSTATIC=m CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_FAKE=m CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set CONFIG_HOTPLUG_PCI_CPCI=y CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m CONFIG_HOTPLUG_PCI_SHPC=m # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set CONFIG_IP_ADVANCED_ROUTER=y # CONFIG_ASK_IP_FIB_HASH is not set CONFIG_IP_FIB_TRIE=y # CONFIG_IP_FIB_HASH is not set # CONFIG_IP_FIB_TRIE_STATS is not set # CONFIG_IP_MULTIPLE_TABLES is not set # CONFIG_IP_ROUTE_MULTIPATH is not set CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y CONFIG_ARPD=y CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y # CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y # CONFIG_TCP_CONG_BIC is not set # CONFIG_TCP_CONG_CUBIC is not set CONFIG_TCP_CONG_WESTWOOD=y # CONFIG_TCP_CONG_HTCP is not set CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=y CONFIG_TCP_CONG_VEGAS=y # CONFIG_TCP_CONG_SCALABLE is not set CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=y # CONFIG_DEFAULT_BIC is not set # CONFIG_DEFAULT_CUBIC is not set # CONFIG_DEFAULT_HTCP is not set CONFIG_DEFAULT_VEGAS=y # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="vegas" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y # CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=m CONFIG_SCTP_DBG_MSG=y CONFIG_SCTP_DBG_OBJCNT=y CONFIG_SCTP_HMAC_NONE=y # CONFIG_SCTP_HMAC_SHA1 is not set # CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_STP=y CONFIG_BRIDGE=y # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=y CONFIG_LLC2=y CONFIG_IPX=y # CONFIG_IPX_INTERN is not set CONFIG_ATALK=y CONFIG_DEV_APPLETALK=m # CONFIG_IPDDP is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set CONFIG_ECONET=y CONFIG_ECONET_AUNUDP=y # CONFIG_ECONET_NATIVE is not set CONFIG_WAN_ROUTER=y CONFIG_PHONET=y CONFIG_IEEE802154=y # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=y CONFIG_NET_DROP_MONITOR=y # CONFIG_HAMRADIO is not set CONFIG_CAN=y CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y # # CAN Device Drivers # CONFIG_CAN_VCAN=m CONFIG_CAN_DEV=m # CONFIG_CAN_CALC_BITTIMING is not set # CONFIG_CAN_SJA1000 is not set # CONFIG_CAN_EMS_USB is not set CONFIG_CAN_DEBUG_DEVICES=y # CONFIG_IRDA is not set CONFIG_BT=y CONFIG_BT_L2CAP=m # CONFIG_BT_SCO is not set CONFIG_BT_RFCOMM=m # CONFIG_BT_RFCOMM_TTY is not set CONFIG_BT_BNEP=m # CONFIG_BT_BNEP_MC_FILTER is not set CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m # # Bluetooth device drivers # CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_LL=y # CONFIG_BT_HCIBCM203X is not set CONFIG_BT_HCIBPA10X=y CONFIG_BT_HCIBFUSB=y CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m # CONFIG_BT_HCIBTUART is not set CONFIG_BT_HCIVHCI=m # CONFIG_BT_MRVL is not set CONFIG_AF_RXRPC=y CONFIG_AF_RXRPC_DEBUG=y CONFIG_RXKAD=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # CONFIG_WIMAX=y CONFIG_WIMAX_DEBUG_LEVEL=8 CONFIG_RFKILL=y CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y CONFIG_SYS_HYPERVISOR=y CONFIG_CONNECTOR=m # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_CPQ_DA=y CONFIG_BLK_CPQ_CISS_DA=y CONFIG_CISS_SCSI_TAPE=y CONFIG_BLK_DEV_DAC960=y CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_SX8=m CONFIG_BLK_DEV_UB=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_XEN_BLKDEV_FRONTEND=y # CONFIG_VIRTIO_BLK is not set CONFIG_BLK_DEV_HD=y CONFIG_MISC_DEVICES=y CONFIG_IBM_ASM=y CONFIG_PHANTOM=y # CONFIG_SGI_IOC4 is not set CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m CONFIG_ENCLOSURE_SERVICES=y CONFIG_HP_ILO=y CONFIG_ISL29003=m CONFIG_C2PORT=m CONFIG_C2PORT_DURAMAR_2150=m # # EEPROM support # CONFIG_EEPROM_AT24=m # CONFIG_EEPROM_AT25 is not set CONFIG_EEPROM_LEGACY=m CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m CONFIG_CB710_CORE=m # CONFIG_CB710_DEBUG is not set CONFIG_CB710_DEBUG_ASSUMPTIONS=y CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_ENCLOSURE=m # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y # CONFIG_SCSI_SAS_ATA is not set CONFIG_SCSI_SAS_HOST_SMP=y CONFIG_SCSI_SAS_LIBSAS_DEBUG=y CONFIG_SCSI_SRP_ATTRS=m # CONFIG_SCSI_SRP_TGT_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=y # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set CONFIG_BLK_DEV_3W_XXXX_RAID=y CONFIG_SCSI_3W_9XXX=y # CONFIG_SCSI_ACARD is not set CONFIG_SCSI_AACRAID=y CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=y CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=5000 CONFIG_AIC79XX_DEBUG_ENABLE=y CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set CONFIG_SCSI_ADVANSYS=m CONFIG_SCSI_ARCMSR=y # CONFIG_SCSI_ARCMSR_AER is not set CONFIG_MEGARAID_NEWGEN=y # CONFIG_MEGARAID_MM is not set CONFIG_MEGARAID_LEGACY=y CONFIG_MEGARAID_SAS=y CONFIG_SCSI_MPT2SAS=y CONFIG_SCSI_MPT2SAS_MAX_SGE=128 CONFIG_SCSI_MPT2SAS_LOGGING=y CONFIG_SCSI_HPTIOP=m CONFIG_SCSI_BUSLOGIC=y CONFIG_LIBFC=y CONFIG_LIBFCOE=m CONFIG_FCOE=m CONFIG_FCOE_FNIC=y # CONFIG_SCSI_DMX3191D is not set CONFIG_SCSI_EATA=y # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set CONFIG_SCSI_EATA_LINKED_COMMANDS=y CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_FUTURE_DOMAIN=y # CONFIG_SCSI_GDTH is not set CONFIG_SCSI_IPS=y CONFIG_SCSI_INITIO=y CONFIG_SCSI_INIA100=y CONFIG_SCSI_STEX=y # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set CONFIG_SCSI_LPFC=y CONFIG_SCSI_LPFC_DEBUG_FS=y CONFIG_SCSI_DC395x=y CONFIG_SCSI_DC390T=m # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_PMCRAID=y CONFIG_SCSI_SRP=y # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_SCSI_DH=y CONFIG_SCSI_DH_RDAC=m # CONFIG_SCSI_DH_HP_SW is not set # CONFIG_SCSI_DH_EMC is not set # CONFIG_SCSI_DH_ALUA is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y CONFIG_SATA_SIL24=y CONFIG_ATA_SFF=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set CONFIG_SATA_NV=y CONFIG_PDC_ADMA=m CONFIG_SATA_QSTOR=m CONFIG_SATA_PROMISE=y # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set CONFIG_SATA_SIS=m # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set CONFIG_SATA_VITESSE=m # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set CONFIG_PATA_ATP867X=y # CONFIG_PATA_ATIIXP is not set CONFIG_PATA_CMD640_PCI=m CONFIG_PATA_CMD64X=y CONFIG_PATA_CS5520=y CONFIG_PATA_CS5530=m # CONFIG_PATA_CYPRESS is not set CONFIG_PATA_EFAR=m CONFIG_ATA_GENERIC=m CONFIG_PATA_HPT366=m # CONFIG_PATA_HPT37X is not set CONFIG_PATA_HPT3X2N=m # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set CONFIG_PATA_IT8213=y CONFIG_PATA_JMICRON=m # CONFIG_PATA_TRIFLEX is not set CONFIG_PATA_MARVELL=y # CONFIG_PATA_MPIIX is not set CONFIG_PATA_OLDPIIX=y CONFIG_PATA_NETCELL=m CONFIG_PATA_NINJA32=y # CONFIG_PATA_NS87410 is not set CONFIG_PATA_NS87415=y # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PCMCIA is not set CONFIG_PATA_PDC_OLD=m CONFIG_PATA_RADISYS=y CONFIG_PATA_RDC=m # CONFIG_PATA_RZ1000 is not set CONFIG_PATA_SC1200=m CONFIG_PATA_SERVERWORKS=m CONFIG_PATA_PDC2027X=y CONFIG_PATA_SIL680=y CONFIG_PATA_SIS=m CONFIG_PATA_VIA=y # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set CONFIG_PATA_SCH=m # CONFIG_MD is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=y CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m CONFIG_FUSION_LOGGING=y # # IEEE 1394 (FireWire) support # # # You can enable one or both FireWire driver stacks. # # # See the help texts for more information. # # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m CONFIG_IEEE1394_OHCI1394=m # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_SBP2_PHYS_DMA=y # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_RAWIO=m CONFIG_IEEE1394_VIDEO1394=m # CONFIG_IEEE1394_DV1394 is not set CONFIG_IEEE1394_VERBOSEDEBUG=y CONFIG_I2O=y CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y # CONFIG_I2O_EXT_ADAPTEC is not set # CONFIG_I2O_CONFIG is not set CONFIG_I2O_BUS=m CONFIG_I2O_BLOCK=y CONFIG_I2O_SCSI=y CONFIG_I2O_PROC=m CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set CONFIG_BONDING=m # CONFIG_MACVLAN is not set CONFIG_EQUALIZER=m CONFIG_TUN=y CONFIG_VETH=m CONFIG_NET_SB1000=m # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_REALTEK_PHY=y CONFIG_NATIONAL_PHY=m CONFIG_STE10XP=m CONFIG_LSI_ET1011C_PHY=y CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=m # CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set CONFIG_ENC28J60=y CONFIG_ENC28J60_WRITEVERIFY=y CONFIG_ETHOC=m CONFIG_DNET=m CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_DE2104X_DSL=0 CONFIG_TULIP=y CONFIG_TULIP_MWI=y CONFIG_TULIP_MMIO=y CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=y CONFIG_DM9102=m # CONFIG_ULI526X is not set # CONFIG_PCMCIA_XIRCOM is not set CONFIG_HP100=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y CONFIG_ADAPTEC_STARFIRE=m CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_FORCEDETH=y CONFIG_FORCEDETH_NAPI=y CONFIG_E100=y CONFIG_FEALNX=y # CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=y CONFIG_8139CP=m CONFIG_8139TOO=y CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=y CONFIG_R6040=m CONFIG_SIS900=y # CONFIG_EPIC100 is not set CONFIG_SMSC9420=m CONFIG_SUNDANCE=y # CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=m CONFIG_KS8842=m # CONFIG_KS8851 is not set # CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set CONFIG_ATL2=m CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=y CONFIG_E1000=m CONFIG_E1000E=y CONFIG_IP1000=y CONFIG_IGB=m CONFIG_IGBVF=m CONFIG_NS83820=y CONFIG_HAMACHI=y CONFIG_YELLOWFIN=y # CONFIG_R8169 is not set CONFIG_SIS190=m CONFIG_SKGE=y # CONFIG_SKGE_DEBUG is not set CONFIG_SKY2=y # CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_CNIC is not set CONFIG_QLA3XXX=y # CONFIG_ATL1 is not set CONFIG_ATL1E=m CONFIG_ATL1C=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y CONFIG_MDIO=m # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=m CONFIG_ENIC=y # CONFIG_IXGBE is not set CONFIG_IXGB=m CONFIG_S2IO=m # CONFIG_VXGE is not set CONFIG_MYRI10GE=y # CONFIG_NETXEN_NIC is not set CONFIG_NIU=m CONFIG_MLX4_EN=y CONFIG_MLX4_CORE=y # CONFIG_MLX4_DEBUG is not set CONFIG_TEHUTI=m # CONFIG_BNX2X is not set CONFIG_QLGE=y # CONFIG_SFC is not set CONFIG_BE2NET=m CONFIG_TR=y # CONFIG_IBMOL is not set # CONFIG_3C359 is not set CONFIG_TMS380TR=y CONFIG_TMSPCI=y # CONFIG_ABYSS is not set CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # WiMAX Wireless Broadband devices # CONFIG_WIMAX_I2400M=m # CONFIG_WIMAX_I2400M_USB is not set CONFIG_WIMAX_I2400M_SDIO=m CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 # # USB Network Adapters # CONFIG_USB_CATC=y CONFIG_USB_KAWETH=y # CONFIG_USB_PEGASUS is not set CONFIG_USB_RTL8150=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set CONFIG_USB_NET_CDCETHER=y # CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set CONFIG_USB_NET_SMSC95XX=y CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=y CONFIG_USB_NET_PLUSB=y CONFIG_USB_NET_MCS7830=y # CONFIG_USB_NET_RNDIS_HOST is not set CONFIG_USB_NET_CDC_SUBSET=m # CONFIG_USB_ALI_M5632 is not set # CONFIG_USB_AN2720 is not set CONFIG_USB_BELKIN=y # CONFIG_USB_ARMLINUX is not set CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=y CONFIG_USB_HSO=y # CONFIG_USB_NET_INT51X1 is not set # CONFIG_USB_CDC_PHONET is not set CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_PCMCIA_PCNET=m CONFIG_PCMCIA_NMCLAN=m # CONFIG_PCMCIA_SMC91C92 is not set CONFIG_PCMCIA_XIRC2PS=m CONFIG_PCMCIA_AXNET=m CONFIG_PCMCIA_IBMTR=m CONFIG_WAN=y CONFIG_LANMEDIA=m CONFIG_HDLC=m CONFIG_HDLC_RAW=m CONFIG_HDLC_RAW_ETH=m CONFIG_HDLC_CISCO=m # CONFIG_HDLC_FR is not set # CONFIG_HDLC_PPP is not set # # X.25/LAPB support is disabled # # CONFIG_PCI200SYN is not set CONFIG_WANXL=m # CONFIG_PC300TOO is not set CONFIG_FARSYNC=m CONFIG_DSCC4=m CONFIG_DSCC4_PCISYNC=y # CONFIG_DSCC4_PCI_RST is not set CONFIG_DLCI=m CONFIG_DLCI_MAX=8 CONFIG_WAN_ROUTER_DRIVERS=y # CONFIG_CYCLADES_SYNC is not set CONFIG_SBNI=y # CONFIG_SBNI_MULTILINE is not set CONFIG_IEEE802154_DRIVERS=y # CONFIG_IEEE802154_FAKEHARD is not set CONFIG_XEN_NETDEV_FRONTEND=y # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=y CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y # CONFIG_PPP_ASYNC is not set CONFIG_PPP_SYNC_TTY=y # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set CONFIG_PPP_MPPE=y CONFIG_PPPOE=y CONFIG_PPPOL2TP=m CONFIG_SLIP=y CONFIG_SLIP_COMPRESSED=y CONFIG_SLHC=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y # CONFIG_NET_FC is not set CONFIG_NETCONSOLE=y CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_VIRTIO_NET is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ADP5588=m CONFIG_KEYBOARD_ATKBD=y CONFIG_QT2160=m CONFIG_KEYBOARD_LKKBD=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set CONFIG_KEYBOARD_MAX7359=m CONFIG_KEYBOARD_NEWTON=y CONFIG_KEYBOARD_OPENCORES=m CONFIG_KEYBOARD_STOWAWAY=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set CONFIG_MOUSE_BCM5974=y # CONFIG_MOUSE_VSXXXAA is not set CONFIG_MOUSE_GPIO=m # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_ACECAD is not set CONFIG_TABLET_USB_AIPTEK=m # CONFIG_TABLET_USB_GTCO is not set CONFIG_TABLET_USB_KBTAB=y CONFIG_TABLET_USB_WACOM=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m # CONFIG_TOUCHSCREEN_AD7877 is not set CONFIG_TOUCHSCREEN_AD7879_I2C=m CONFIG_TOUCHSCREEN_AD7879=m # CONFIG_TOUCHSCREEN_EETI is not set CONFIG_TOUCHSCREEN_FUJITSU=y CONFIG_TOUCHSCREEN_GUNZE=m # CONFIG_TOUCHSCREEN_ELO is not set CONFIG_TOUCHSCREEN_WACOM_W8001=m CONFIG_TOUCHSCREEN_MCS5000=m CONFIG_TOUCHSCREEN_MTOUCH=m # CONFIG_TOUCHSCREEN_INEXIO is not set CONFIG_TOUCHSCREEN_MK712=y CONFIG_TOUCHSCREEN_PENMOUNT=m # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set CONFIG_TOUCHSCREEN_UCB1400=m # CONFIG_TOUCHSCREEN_WM97XX is not set CONFIG_TOUCHSCREEN_USB_COMPOSITE=m CONFIG_TOUCHSCREEN_USB_EGALAX=y # CONFIG_TOUCHSCREEN_USB_PANJIT is not set # CONFIG_TOUCHSCREEN_USB_3M is not set CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y # CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set CONFIG_TOUCHSCREEN_USB_GOTOP=y CONFIG_TOUCHSCREEN_USB_JASTEC=y # CONFIG_TOUCHSCREEN_USB_E2I is not set CONFIG_TOUCHSCREEN_TOUCHIT213=m # CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_APANEL=m # CONFIG_INPUT_ATLAS_BTNS is not set CONFIG_INPUT_ATI_REMOTE=m # CONFIG_INPUT_ATI_REMOTE2 is not set CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_POWERMATE=y CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m # CONFIG_INPUT_UINPUT is not set CONFIG_INPUT_WINBOND_CIR=m # CONFIG_INPUT_PCF50633_PMU is not set CONFIG_INPUT_GPIO_ROTARY_ENCODER=y # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_CT82C710=m # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=y CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set CONFIG_HVC_DRIVER=y CONFIG_HVC_IRQ=y CONFIG_HVC_XEN=y CONFIG_VIRTIO_CONSOLE=y CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_PANIC_STRING=y CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m # CONFIG_IPMI_POWEROFF is not set CONFIG_HW_RANDOM=m CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m # CONFIG_HW_RANDOM_VIA is not set CONFIG_HW_RANDOM_VIRTIO=m # CONFIG_NVRAM is not set # CONFIG_R3964 is not set CONFIG_APPLICOM=y # # PCMCIA character devices # CONFIG_SYNCLINK_CS=m CONFIG_CARDMAN_4000=m CONFIG_CARDMAN_4040=m CONFIG_IPWIRELESS=m CONFIG_MWAVE=y # CONFIG_PC8736x_GPIO is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=y CONFIG_TCG_TPM=y CONFIG_TCG_TIS=y CONFIG_TCG_NSC=m CONFIG_TCG_ATMEL=y CONFIG_TCG_INFINEON=m CONFIG_TELCLOCK=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m # CONFIG_I2C_AMD756_S4882 is not set CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m # CONFIG_I2C_ISCH is not set CONFIG_I2C_PIIX4=m # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m # CONFIG_I2C_VIA is not set CONFIG_I2C_VIAPRO=m # # ACPI drivers # CONFIG_I2C_SCMI=m # # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set CONFIG_I2C_SIMTEC=m # # External I2C/SMBus adapter drivers # CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_TAOS_EVM=m # CONFIG_I2C_TINY_USB is not set # # Graphics adapter I2C/DDC channel drivers # CONFIG_I2C_VOODOO3=m # # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # CONFIG_DS1682=m CONFIG_SENSORS_TSL2550=m CONFIG_I2C_DEBUG_CORE=y # CONFIG_I2C_DEBUG_ALGO is not set CONFIG_I2C_DEBUG_BUS=y # CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_DEBUG=y CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y CONFIG_SPI_GPIO=y # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # # PPS support # CONFIG_PPS=m CONFIG_PPS_DEBUG=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_DEBUG_GPIO=y # CONFIG_GPIO_SYSFS is not set # # Memory mapped GPIO expanders: # # # I2C GPIO expanders: # CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m # # PCI GPIO expanders: # # CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set CONFIG_GPIO_MC33880=m # # AC97 GPIO expanders: # # CONFIG_GPIO_UCB1400 is not set CONFIG_W1=y # CONFIG_W1_CON is not set # # 1-wire Bus Masters # CONFIG_W1_MASTER_MATROX=y CONFIG_W1_MASTER_DS2490=y # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_GPIO=y # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=y CONFIG_W1_SLAVE_SMEM=m # CONFIG_W1_SLAVE_DS2431 is not set # CONFIG_W1_SLAVE_DS2433 is not set CONFIG_W1_SLAVE_DS2760=y # CONFIG_W1_SLAVE_BQ27000 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set CONFIG_BATTERY_DS2760=y # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ27x00 is not set CONFIG_BATTERY_MAX17040=m CONFIG_CHARGER_PCF50633=m CONFIG_HWMON=m CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set CONFIG_SENSORS_ABITUGURU3=m CONFIG_SENSORS_AD7414=m CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADCXX=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7462 is not set CONFIG_SENSORS_ADT7470=m # CONFIG_SENSORS_ADT7473 is not set CONFIG_SENSORS_ADT7475=m CONFIG_SENSORS_K8TEMP=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F71805F=m # CONFIG_SENSORS_F71882FG is not set CONFIG_SENSORS_F75375S=m CONFIG_SENSORS_FSCHMD=m # CONFIG_SENSORS_G760A is not set CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m # CONFIG_SENSORS_CORETEMP is not set CONFIG_SENSORS_IBMAEM=m # CONFIG_SENSORS_IBMPEX is not set CONFIG_SENSORS_IT87=m # CONFIG_SENSORS_LM63 is not set CONFIG_SENSORS_LM70=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m # CONFIG_SENSORS_LM78 is not set CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set CONFIG_SENSORS_LM93=m CONFIG_SENSORS_LTC4215=m CONFIG_SENSORS_LTC4245=m CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_MAX1111=m # CONFIG_SENSORS_MAX1619 is not set CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_DME1737=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m # CONFIG_SENSORS_SMSC47B397 is not set CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP401=m # CONFIG_SENSORS_TMP421 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT1211 is not set CONFIG_SENSORS_VT8231=m # CONFIG_SENSORS_W83781D is not set CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m # CONFIG_SENSORS_W83793 is not set CONFIG_SENSORS_W83L785TS=m # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set CONFIG_SENSORS_W83627EHF=m # CONFIG_SENSORS_HDAPS is not set CONFIG_SENSORS_APPLESMC=m # # ACPI drivers # CONFIG_SENSORS_ATK0110=m CONFIG_SENSORS_LIS3LV02D=m CONFIG_THERMAL=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m # CONFIG_ACQUIRE_WDT is not set CONFIG_ADVANTECH_WDT=y CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m CONFIG_SC520_WDT=y # CONFIG_SBC_FITPC2_WATCHDOG is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set CONFIG_IBMASR=m # CONFIG_WAFER_WDT is not set CONFIG_I6300ESB_WDT=m # CONFIG_ITCO_WDT is not set CONFIG_IT8712F_WDT=m CONFIG_IT87_WDT=y # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set CONFIG_PC87413_WDT=y CONFIG_60XX_WDT=y # CONFIG_SBC8360_WDT is not set CONFIG_CPU5_WDT=y CONFIG_SMSC_SCH311X_WDT=m # CONFIG_SMSC37B787_WDT is not set CONFIG_W83627HF_WDT=m # CONFIG_W83697HF_WDT is not set # CONFIG_W83697UG_WDT is not set # CONFIG_W83877F_WDT is not set CONFIG_W83977F_WDT=y CONFIG_MACHZ_WDT=m # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=y # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # CONFIG_SSB=y CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y # CONFIG_SSB_B43_PCI_BRIDGE is not set CONFIG_SSB_SILENT=y CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # CONFIG_MFD_CORE=m CONFIG_MFD_SM501=m CONFIG_MFD_SM501_GPIO=y # CONFIG_HTC_PASIC3 is not set CONFIG_UCB1400_CORE=m CONFIG_TPS65010=m # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set CONFIG_MFD_PCF50633=m CONFIG_MFD_MC13783=m CONFIG_PCF50633_ADC=m CONFIG_PCF50633_GPIO=m CONFIG_AB3100_CORE=m # CONFIG_AB3100_OTP is not set # CONFIG_EZX_PCAP is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=m CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=m # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set CONFIG_REGULATOR_PCF50633=m CONFIG_REGULATOR_LP3971=m # CONFIG_REGULATOR_MC13783 is not set CONFIG_REGULATOR_AB3100=m CONFIG_REGULATOR_TPS65023=m CONFIG_REGULATOR_TPS6507X=m CONFIG_MEDIA_SUPPORT=y # # Multimedia core support # CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_COMMON=m CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_DVB_CORE=y CONFIG_VIDEO_MEDIA=y # # Multimedia drivers # CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_MEDIA_ATTACH=y CONFIG_MEDIA_TUNER=m CONFIG_MEDIA_TUNER_CUSTOMISE=y CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m # CONFIG_MEDIA_TUNER_MT2060 is not set CONFIG_MEDIA_TUNER_MT2266=m # CONFIG_MEDIA_TUNER_MT2131 is not set CONFIG_MEDIA_TUNER_QT1010=m # CONFIG_MEDIA_TUNER_XC2028 is not set CONFIG_MEDIA_TUNER_XC5000=m # CONFIG_MEDIA_TUNER_MXL5005S is not set # CONFIG_MEDIA_TUNER_MXL5007T is not set # CONFIG_MEDIA_TUNER_MC44S803 is not set CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEOBUF_GEN=m CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_BTCX=m CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_IR_I2C=m CONFIG_VIDEO_TVAUDIO=m CONFIG_VIDEO_TDA7432=m CONFIG_VIDEO_TDA9840=m CONFIG_VIDEO_TEA6415C=m CONFIG_VIDEO_TEA6420=m CONFIG_VIDEO_MSP3400=m CONFIG_VIDEO_CS5345=m CONFIG_VIDEO_SAA6588=m CONFIG_VIDEO_OV7670=m CONFIG_VIDEO_MT9V011=m CONFIG_VIDEO_SAA711X=m CONFIG_VIDEO_TVP5150=m CONFIG_VIDEO_CX25840=m CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_VIVI=m CONFIG_VIDEO_BT848=m CONFIG_VIDEO_BT848_DVB=y CONFIG_VIDEO_CPIA=m CONFIG_VIDEO_CPIA_USB=m CONFIG_VIDEO_CPIA2=m CONFIG_VIDEO_SAA5246A=m CONFIG_VIDEO_SAA5249=m CONFIG_VIDEO_STRADIS=m CONFIG_VIDEO_ZORAN=m # CONFIG_VIDEO_ZORAN_DC30 is not set # CONFIG_VIDEO_ZORAN_ZR36060 is not set CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_DVB=m CONFIG_VIDEO_MXB=m # CONFIG_VIDEO_HEXIUM_ORION is not set CONFIG_VIDEO_HEXIUM_GEMINI=m # CONFIG_VIDEO_CX88 is not set CONFIG_VIDEO_CX23885=m # CONFIG_VIDEO_AU0828 is not set # CONFIG_VIDEO_IVTV is not set CONFIG_VIDEO_CX18=m CONFIG_VIDEO_SAA7164=m CONFIG_VIDEO_CAFE_CCIC=m CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_MT9M001=m CONFIG_SOC_CAMERA_MT9M111=m CONFIG_SOC_CAMERA_MT9T031=m # CONFIG_SOC_CAMERA_MT9V022 is not set CONFIG_SOC_CAMERA_TW9910=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_SOC_CAMERA_OV772X=m CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m # CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV is not set CONFIG_USB_GSPCA=m CONFIG_USB_M5602=m CONFIG_USB_STV06XX=m CONFIG_USB_GL860=m CONFIG_USB_GSPCA_CONEX=m CONFIG_USB_GSPCA_ETOMS=m # CONFIG_USB_GSPCA_FINEPIX is not set CONFIG_USB_GSPCA_JEILINJ=m CONFIG_USB_GSPCA_MARS=m # CONFIG_USB_GSPCA_MR97310A is not set # CONFIG_USB_GSPCA_OV519 is not set CONFIG_USB_GSPCA_OV534=m # CONFIG_USB_GSPCA_PAC207 is not set CONFIG_USB_GSPCA_PAC7311=m # CONFIG_USB_GSPCA_SN9C20X is not set CONFIG_USB_GSPCA_SONIXB=m CONFIG_USB_GSPCA_SONIXJ=m # CONFIG_USB_GSPCA_SPCA500 is not set CONFIG_USB_GSPCA_SPCA501=m CONFIG_USB_GSPCA_SPCA505=m CONFIG_USB_GSPCA_SPCA506=m CONFIG_USB_GSPCA_SPCA508=m # CONFIG_USB_GSPCA_SPCA561 is not set CONFIG_USB_GSPCA_SQ905=m # CONFIG_USB_GSPCA_SQ905C is not set CONFIG_USB_GSPCA_STK014=m # CONFIG_USB_GSPCA_SUNPLUS is not set CONFIG_USB_GSPCA_T613=m # CONFIG_USB_GSPCA_TV8532 is not set # CONFIG_USB_GSPCA_VC032X is not set # CONFIG_USB_GSPCA_ZC3XX is not set # CONFIG_VIDEO_PVRUSB2 is not set CONFIG_VIDEO_HDPVR=m CONFIG_VIDEO_EM28XX=m # CONFIG_VIDEO_EM28XX_ALSA is not set CONFIG_VIDEO_EM28XX_DVB=m # CONFIG_VIDEO_CX231XX is not set # CONFIG_VIDEO_USBVISION is not set CONFIG_VIDEO_USBVIDEO=m CONFIG_USB_VICAM=m # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_QUICKCAM_MESSENGER is not set # CONFIG_USB_ET61X251 is not set CONFIG_VIDEO_OVCAMCHIP=m CONFIG_USB_W9968CF=m CONFIG_USB_OV511=m CONFIG_USB_SE401=m CONFIG_USB_SN9C102=m CONFIG_USB_STV680=m # CONFIG_USB_ZC0301 is not set CONFIG_USB_PWC=m CONFIG_USB_PWC_DEBUG=y CONFIG_USB_PWC_INPUT_EVDEV=y # CONFIG_USB_ZR364XX is not set CONFIG_USB_STKWEBCAM=m # CONFIG_USB_S2255 is not set CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_GEMTEK_PCI=m CONFIG_RADIO_MAXIRADIO=m # CONFIG_RADIO_MAESTRO is not set CONFIG_I2C_SI4713=m CONFIG_RADIO_SI4713=m # CONFIG_USB_DSBR is not set CONFIG_RADIO_SI470X=y CONFIG_USB_SI470X=m CONFIG_I2C_SI470X=m CONFIG_USB_MR800=m CONFIG_RADIO_TEA5764=m CONFIG_DVB_MAX_ADAPTERS=8 CONFIG_DVB_DYNAMIC_MINORS=y # CONFIG_DVB_CAPTURE_DRIVERS is not set CONFIG_DVB_BT8XX=m CONFIG_DVB_MT312=m CONFIG_DVB_ZL10036=m CONFIG_DVB_ZL10039=m CONFIG_DVB_STV6110=m CONFIG_DVB_STV0900=m CONFIG_DVB_TDA10086=m CONFIG_DVB_TDA826X=m CONFIG_DVB_TDA1004X=m CONFIG_DVB_MT352=m CONFIG_DVB_ZL10353=m CONFIG_DVB_DIB7000P=m CONFIG_DVB_TDA10048=m CONFIG_DVB_TDA10023=m CONFIG_DVB_NXT200X=m CONFIG_DVB_LGDT330X=m CONFIG_DVB_LGDT3305=m CONFIG_DVB_S5H1409=m CONFIG_DVB_S5H1411=m CONFIG_DVB_PLL=m CONFIG_DVB_LNBP21=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m CONFIG_DAB=y CONFIG_USB_DABUSB=m # # Graphics support # CONFIG_AGP=m CONFIG_AGP_AMD64=m CONFIG_AGP_INTEL=m CONFIG_AGP_SIS=m # CONFIG_AGP_VIA is not set CONFIG_VGA_ARB=y CONFIG_DRM=m CONFIG_DRM_KMS_HELPER=m CONFIG_DRM_TTM=m # CONFIG_DRM_TDFX is not set CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set CONFIG_DRM_MGA=m # CONFIG_DRM_SIS is not set CONFIG_DRM_VIA=m # CONFIG_DRM_SAVAGE is not set CONFIG_VGASTATE=m # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=m # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=m # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=m CONFIG_FB_SYS_COPYAREA=m CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y CONFIG_FB_HECUBA=m CONFIG_FB_SVGALIB=m # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set CONFIG_FB_PM2=m CONFIG_FB_PM2_FIFO_DISCONNECT=y CONFIG_FB_CYBER2000=m # CONFIG_FB_ARC is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_UVESA=m CONFIG_FB_N411=m CONFIG_FB_HGA=m CONFIG_FB_HGA_ACCEL=y CONFIG_FB_S1D13XXX=m # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_LE80578 is not set CONFIG_FB_INTEL=m # CONFIG_FB_INTEL_DEBUG is not set CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set CONFIG_FB_ATY=m # CONFIG_FB_ATY_CT is not set CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set CONFIG_FB_VIA=m # CONFIG_FB_NEOMAGIC is not set CONFIG_FB_KYRO=m # CONFIG_FB_3DFX is not set CONFIG_FB_VOODOO1=m CONFIG_FB_VT8623=m CONFIG_FB_TRIDENT=m CONFIG_FB_ARK=m # CONFIG_FB_PM3 is not set CONFIG_FB_CARMINE=m # CONFIG_FB_CARMINE_DRAM_EVAL is not set CONFIG_CARMINE_DRAM_CUSTOM=y CONFIG_FB_GEODE=y CONFIG_FB_GEODE_LX=m CONFIG_FB_GEODE_GX=m CONFIG_FB_GEODE_GX1=m # CONFIG_FB_TMIO is not set # CONFIG_FB_SM501 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # CONFIG_FB_METRONOME is not set CONFIG_FB_MB862XX=m # CONFIG_FB_MB862XX_PCI_GDC is not set CONFIG_FB_BROADSHEET=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m CONFIG_LCD_LMS283GF05=m CONFIG_LCD_LTV350QV=m CONFIG_LCD_ILI9320=m CONFIG_LCD_TDO24M=m CONFIG_LCD_VGG2432A4=m # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y CONFIG_BACKLIGHT_PROGEAR=y # CONFIG_BACKLIGHT_MBP_NVIDIA is not set # CONFIG_BACKLIGHT_SAHARA is not set # # Display device support # CONFIG_DISPLAY_SUPPORT=y # # Display hardware drivers # # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y # CONFIG_SND_PCM_OSS is not set CONFIG_SND_HRTIMER=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set CONFIG_SND_DEBUG=y # CONFIG_SND_DEBUG_VERBOSE is not set CONFIG_SND_PCM_XRUN_DEBUG=y CONFIG_SND_VMASTER=y CONFIG_SND_DMA_SGBUF=y # CONFIG_SND_RAWMIDI_SEQ is not set # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_MPU401_UART=y CONFIG_SND_OPL3_LIB=y CONFIG_SND_VX_LIB=y CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_MPU401=y # CONFIG_SND_AC97_POWER_SAVE is not set CONFIG_SND_SB_COMMON=y CONFIG_SND_PCI=y CONFIG_SND_AD1889=m # CONFIG_SND_ALS300 is not set CONFIG_SND_ALS4000=y CONFIG_SND_ALI5451=m CONFIG_SND_ATIIXP=y CONFIG_SND_ATIIXP_MODEM=y CONFIG_SND_AU8810=m CONFIG_SND_AU8820=y CONFIG_SND_AU8830=y # CONFIG_SND_AW2 is not set CONFIG_SND_AZT3328=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set CONFIG_SND_CMIPCI=y CONFIG_SND_OXYGEN_LIB=y # CONFIG_SND_OXYGEN is not set CONFIG_SND_CS4281=y CONFIG_SND_CS46XX=y # CONFIG_SND_CS46XX_NEW_DSP is not set # CONFIG_SND_CS5530 is not set CONFIG_SND_CTXFI=y CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=y # CONFIG_SND_LAYLA20 is not set CONFIG_SND_DARLA24=y CONFIG_SND_GINA24=y CONFIG_SND_LAYLA24=y # CONFIG_SND_MONA is not set CONFIG_SND_MIA=m CONFIG_SND_ECHO3G=m # CONFIG_SND_INDIGO is not set CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=y # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set CONFIG_SND_EMU10K1=y CONFIG_SND_EMU10K1X=m # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set CONFIG_SND_ES1938=y CONFIG_SND_ES1968=y # CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y # CONFIG_SND_HDA_INPUT_BEEP is not set # CONFIG_SND_HDA_INPUT_JACK is not set CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=y # CONFIG_SND_HDA_CODEC_ANALOG is not set CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y # CONFIG_SND_HDA_CODEC_SI3054 is not set CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_HDA_POWER_SAVE is not set CONFIG_SND_HDSP=m CONFIG_SND_HDSPM=y CONFIG_SND_HIFIER=y # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set CONFIG_SND_INTEL8X0M=y CONFIG_SND_KORG1212=m CONFIG_SND_LX6464ES=y # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set CONFIG_SND_NM256=m CONFIG_SND_PCXHR=m CONFIG_SND_RIPTIDE=y # CONFIG_SND_RME32 is not set CONFIG_SND_RME96=y CONFIG_SND_RME9652=y CONFIG_SND_SONICVIBES=y CONFIG_SND_TRIDENT=m CONFIG_SND_VIA82XX=m # CONFIG_SND_VIA82XX_MODEM is not set CONFIG_SND_VIRTUOSO=m CONFIG_SND_VX222=y # CONFIG_SND_YMFPCI is not set # CONFIG_SND_SPI is not set # CONFIG_SND_USB is not set CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set # CONFIG_SND_SOC is not set CONFIG_SOUND_PRIME=m CONFIG_SOUND_OSS=m CONFIG_SOUND_TRACEINIT=y # CONFIG_SOUND_DMAP is not set CONFIG_SOUND_SSCAPE=m # CONFIG_SOUND_VMIDI is not set CONFIG_SOUND_TRIX=m # CONFIG_SOUND_MSS is not set CONFIG_SOUND_MPU401=m CONFIG_SOUND_PAS=m # CONFIG_SOUND_PSS is not set CONFIG_SOUND_SB=m CONFIG_SOUND_YM3812=m # CONFIG_SOUND_UART6850 is not set # CONFIG_SOUND_AEDSP16 is not set CONFIG_SOUND_KAHLUA=m CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HIDRAW=y # # USB Input Devices # # CONFIG_USB_HID is not set CONFIG_HID_PID=y # # USB HID Boot Protocol drivers # CONFIG_USB_KBD=y CONFIG_USB_MOUSE=y # # Special HID drivers # # CONFIG_HID_APPLE is not set # CONFIG_HID_WACOM is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y CONFIG_USB_WUSB=m # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=y CONFIG_USB_XHCI_HCD=m CONFIG_USB_XHCI_HCD_DEBUGGING=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set CONFIG_USB_ISP116X_HCD=y CONFIG_USB_ISP1760_HCD=y CONFIG_USB_ISP1362_HCD=m CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_U132_HCD is not set CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_CS=m # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set CONFIG_USB_TMC=m # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # CONFIG_USB_MDC800=y CONFIG_USB_MICROTEK=y # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # CONFIG_USB_EMI62=y CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=y CONFIG_USB_SEVSEG=y # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=y # CONFIG_USB_LCD is not set CONFIG_USB_BERRY_CHARGE=m # CONFIG_USB_LED is not set CONFIG_USB_CYPRESS_CY7C63=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set CONFIG_USB_FTDI_ELAN=m CONFIG_USB_APPLEDISPLAY=y # CONFIG_USB_SISUSBVGA is not set CONFIG_USB_LD=y CONFIG_USB_TRANCEVIBRATOR=m CONFIG_USB_IOWARRIOR=y # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set CONFIG_USB_VST=m # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set CONFIG_NOP_USB_XCEIV=y CONFIG_UWB=y # CONFIG_UWB_HWA is not set CONFIG_UWB_WHCI=m CONFIG_UWB_WLP=m CONFIG_MMC=m CONFIG_MMC_DEBUG=y CONFIG_MMC_UNSAFE_RESUME=y # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_SDIO_UART=m CONFIG_MMC_TEST=m # # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_SDHCI=m # CONFIG_MMC_SDHCI_PCI is not set CONFIG_MMC_SDHCI_PLTFM=m # CONFIG_MMC_WBSD is not set # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SPI=m # CONFIG_MMC_SDRICOH_CS is not set CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MEMSTICK=y CONFIG_MEMSTICK_DEBUG=y # # MemoryStick drivers # CONFIG_MEMSTICK_UNSAFE_RESUME=y # CONFIG_MSPRO_BLOCK is not set # # MemoryStick Host Controller Drivers # # CONFIG_MEMSTICK_TIFM_MS is not set CONFIG_MEMSTICK_JMICRON_38X=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m # # LED drivers # CONFIG_LEDS_ALIX2=m CONFIG_LEDS_PCA9532=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_GPIO_PLATFORM=y # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set CONFIG_LEDS_DAC124S085=m CONFIG_LEDS_BD2802=m # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # # iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=y CONFIG_INFINIBAND_USER_MAD=y # CONFIG_INFINIBAND_USER_ACCESS is not set # CONFIG_INFINIBAND_MTHCA is not set CONFIG_INFINIBAND_IPATH=y CONFIG_INFINIBAND_AMSO1100=m CONFIG_INFINIBAND_AMSO1100_DEBUG=y CONFIG_INFINIBAND_CXGB3=m CONFIG_INFINIBAND_CXGB3_DEBUG=y CONFIG_MLX4_INFINIBAND=m # CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m # CONFIG_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m # # RTC interfaces # # CONFIG_RTC_INTF_SYSFS is not set CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_TEST=m # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set CONFIG_RTC_DRV_DS1672=m CONFIG_RTC_DRV_MAX6900=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_PCF8563=m # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_S35390A=m # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set CONFIG_RTC_DRV_RX8025=m # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set CONFIG_RTC_DRV_DS1305=m CONFIG_RTC_DRV_DS1390=m CONFIG_RTC_DRV_MAX6902=m # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set CONFIG_RTC_DRV_DS3234=m CONFIG_RTC_DRV_PCF2123=m # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=m CONFIG_RTC_DRV_DS1286=m # CONFIG_RTC_DRV_DS1511 is not set CONFIG_RTC_DRV_DS1553=m CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_STK17TA8=m CONFIG_RTC_DRV_M48T86=m # CONFIG_RTC_DRV_M48T35 is not set CONFIG_RTC_DRV_M48T59=m CONFIG_RTC_DRV_BQ4802=m # CONFIG_RTC_DRV_V3020 is not set CONFIG_RTC_DRV_PCF50633=m # CONFIG_RTC_DRV_AB3100 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set CONFIG_AUXDISPLAY=y # CONFIG_UIO is not set # # TI VLYNQ # # CONFIG_XEN_BALLOON is not set # CONFIG_XEN_DEV_EVTCHN is not set CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y # CONFIG_STAGING is not set # CONFIG_X86_PLATFORM_DEVICES is not set # # Firmware Drivers # CONFIG_EDD=y # CONFIG_EDD_OFF is not set CONFIG_FIRMWARE_MEMMAP=y CONFIG_EFI_VARS=y CONFIG_DELL_RBU=m # CONFIG_DCDBAS is not set CONFIG_DMIID=y CONFIG_ISCSI_IBFT_FIND=y CONFIG_ISCSI_IBFT=y # # File systems # CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y CONFIG_JBD2_DEBUG=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_NILFS2_FS=m CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m # CONFIG_CUSE is not set # # Caches # CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set CONFIG_CACHEFILES=m CONFIG_CACHEFILES_DEBUG=y # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m # CONFIG_JOLIET is not set CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set # CONFIG_PROC_SYSCTL is not set # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=y CONFIG_ADFS_FS_RW=y CONFIG_AFFS_FS=y CONFIG_ECRYPT_FS=y # CONFIG_HFS_FS is not set CONFIG_HFSPLUS_FS=y CONFIG_BEFS_FS=y CONFIG_BEFS_DEBUG=y CONFIG_BFS_FS=m CONFIG_EFS_FS=y CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_OMFS_FS=m # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_UFS_FS_WRITE=y CONFIG_UFS_DEBUG=y # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_EXPORTFS=m # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y # CONFIG_ACORN_PARTITION_CUMANA is not set CONFIG_ACORN_PARTITION_EESOX=y # CONFIG_ACORN_PARTITION_ICS is not set CONFIG_ACORN_PARTITION_ADFS=y # CONFIG_ACORN_PARTITION_POWERTEC is not set # CONFIG_ACORN_PARTITION_RISCIX is not set CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set CONFIG_SOLARIS_X86_PARTITION=y # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y # CONFIG_EFI_PARTITION is not set CONFIG_SYSV68_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y CONFIG_NLS_CODEPAGE_855=y CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=y # CONFIG_NLS_CODEPAGE_861 is not set CONFIG_NLS_CODEPAGE_862=m # CONFIG_NLS_CODEPAGE_863 is not set CONFIG_NLS_CODEPAGE_864=y CONFIG_NLS_CODEPAGE_865=m # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=y # CONFIG_NLS_CODEPAGE_1250 is not set CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=y # CONFIG_NLS_ISO8859_6 is not set CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m # CONFIG_NLS_ISO8859_13 is not set CONFIG_NLS_ISO8859_14=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set CONFIG_NLS_KOI8_U=y CONFIG_NLS_UTF8=y CONFIG_DLM=m CONFIG_DLM_DEBUG=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 CONFIG_DETECT_HUNG_TASK=y CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set CONFIG_DEBUG_KMEMLEAK=y CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400 # CONFIG_DEBUG_KMEMLEAK_TEST is not set # CONFIG_DEBUG_RT_MUTEXES is not set CONFIG_RT_MUTEX_TESTER=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y # CONFIG_PROVE_LOCKING is not set CONFIG_LOCKDEP=y CONFIG_LOCK_STAT=y CONFIG_DEBUG_LOCKDEP=y CONFIG_TRACE_IRQFLAGS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_LOCKING_API_SELFTESTS=y CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_VM=y CONFIG_DEBUG_VIRTUAL=y CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y # CONFIG_DEBUG_CREDENTIALS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y CONFIG_BOOT_PRINTK_DELAY=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_DETECTOR=y CONFIG_BACKTRACE_SELF_TEST=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set CONFIG_FAULT_INJECTION=y CONFIG_FAILSLAB=y CONFIG_FAIL_PAGE_ALLOC=y CONFIG_FAIL_MAKE_REQUEST=y CONFIG_FAIL_IO_TIMEOUT=y CONFIG_FAULT_INJECTION_DEBUG_FS=y CONFIG_LATENCYTOP=y CONFIG_DEBUG_PAGEALLOC=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE_NMI_ENTER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_TRACER_MAX_TRACE=y CONFIG_RING_BUFFER=y CONFIG_FTRACE_NMI_ENTER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y # CONFIG_FUNCTION_GRAPH_TRACER is not set CONFIG_IRQSOFF_TRACER=y CONFIG_SYSPROF_TRACER=y CONFIG_SCHED_TRACER=y # CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set CONFIG_POWER_TRACER=y CONFIG_STACK_TRACER=y # CONFIG_KMEMTRACE is not set CONFIG_WORKQUEUE_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_DYNAMIC_FTRACE=y CONFIG_FUNCTION_PROFILER=y CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_MMIOTRACE is not set CONFIG_RING_BUFFER_BENCHMARK=m CONFIG_PROVIDE_OHCI1394_DMA_INIT=y CONFIG_BUILD_DOCSRC=y CONFIG_DYNAMIC_DEBUG=y # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y # CONFIG_KGDB_SERIAL_CONSOLE is not set CONFIG_KGDB_TESTS=y # CONFIG_KGDB_TESTS_ON_BOOT is not set CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_DEBUG_STACKOVERFLOW is not set CONFIG_DEBUG_STACK_USAGE=y # CONFIG_X86_PTDUMP is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_DEBUG_NX_TEST is not set CONFIG_IOMMU_DEBUG=y CONFIG_IOMMU_STRESS=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 # CONFIG_IO_DELAY_0X80 is not set # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set CONFIG_IO_DELAY_NONE=y CONFIG_DEFAULT_IO_DELAY_TYPE=3 CONFIG_DEBUG_BOOT_PARAMS=y CONFIG_CPA_DEBUG=y # CONFIG_OPTIMIZE_INLINING is not set # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y CONFIG_SECURITY_FILE_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_SELINUX is not set # CONFIG_SECURITY_SMACK is not set CONFIG_SECURITY_TOMOYO=y CONFIG_IMA=y CONFIG_IMA_MEASURE_PCR_IDX=10 CONFIG_IMA_AUDIT=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SEQIV=y # # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_XTS is not set CONFIG_CRYPTO_FPU=y # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=m CONFIG_CRYPTO_GHASH=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_RMD128 is not set CONFIG_CRYPTO_RMD160=m # CONFIG_CRYPTO_RMD256 is not set CONFIG_CRYPTO_RMD320=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y CONFIG_CRYPTO_AES_NI_INTEL=y CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_CAMELLIA=y CONFIG_CRYPTO_CAST5=m # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=y CONFIG_CRYPTO_SALSA20_X86_64=m CONFIG_CRYPTO_SEED=y # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_TEA=y # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # # Compression # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=y CONFIG_KVM_INTEL=y CONFIG_KVM_AMD=m CONFIG_VIRTIO=y CONFIG_VIRTIO_RING=y # CONFIG_VIRTIO_PCI is not set CONFIG_VIRTIO_BALLOON=y CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_NLATTR=y --RnlQjJ0d97Da+TV1-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/