Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753019AbZKIS1x (ORCPT ); Mon, 9 Nov 2009 13:27:53 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751470AbZKIS1w (ORCPT ); Mon, 9 Nov 2009 13:27:52 -0500 Received: from atrey.karlin.mff.cuni.cz ([195.113.26.193]:54649 "EHLO atrey.karlin.mff.cuni.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751046AbZKIS1v (ORCPT ); Mon, 9 Nov 2009 13:27:51 -0500 Date: Mon, 9 Nov 2009 14:58:13 +0100 From: Pavel Machek To: zaurus-devel@www.linuxtogo.org Cc: rpurdie@rpsys.net, lenz@cs.wisc.edu, kernel list , Dirk@Opfer-Online.de, arminlitzel@web.de, Cyril Hrubis , thommycheck@gmail.com, linux-arm-kernel , dbaryshkov@gmail.com, omegamoon@gmail.com, eric.y.miao@gmail.com, utx@penguin.cz Subject: spitz battery driver Message-ID: <20091109135813.GA1385@ucw.cz> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 37976 Lines: 1343 Hi! This introduces battery driver for spitz. For now it is monitoring&debug-only. Signed-off-by: Pavel Machek (but not meant for merge) --- ./drivers/power.ofic/Makefile 2009-10-06 13:51:29.000000000 +0200 +++ ./drivers/power/Makefile 2009-10-11 16:12:09.000000000 +0200 @@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o +obj-m += spitz_battery.o obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o diff -ur ./drivers/power.ofic/power_supply_sysfs.c ./drivers/power/power_supply_sysfs.c --- ./drivers/power.ofic/power_supply_sysfs.c 2009-10-06 13:51:29.000000000 +0200 +++ ./drivers/power/power_supply_sysfs.c 2009-10-15 05:45:46.000000000 +0200 @@ -39,7 +39,8 @@ static ssize_t power_supply_show_property(struct device *dev, struct device_attribute *attr, - char *buf) { + char *buf) +{ static char *status_text[] = { "Unknown", "Charging", "Discharging", "Not charging", "Full" }; @@ -135,7 +136,8 @@ static ssize_t power_supply_show_static_attrs(struct device *dev, struct device_attribute *attr, - char *buf) { + char *buf) +{ static char *type_text[] = { "Battery", "UPS", "Mains", "USB" }; struct power_supply *psy = dev_get_drvdata(dev); diff -ur ./drivers/power.ofic/spitz_battery.c ./drivers/power/spitz_battery.c --- ./drivers/power.ofic/spitz_battery.c 2009-10-11 16:14:11.000000000 +0200 +++ ./drivers/power/spitz_battery.c 2009-10-22 07:27:52.000000000 +0200 @@ -0,0 +1,430 @@ +/* + * Battery and Power Management code for the Sharp SL-3000c + * + * Copyright (c) 2009 Pavel Machek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Li-ion batteries are angry beasts, and they like to explode. + * If angry lithium comes your way, the hw was misdesigned. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "../../arch/arm/mach-pxa/sharpsl.h" + +extern struct sharpsl_pm_status sharpsl_pm; + + +struct spitz_bat { + struct power_supply psy; + + bool (*is_present)(struct spitz_bat *bat); +}; + +static struct spitz_bat spitz_bat_main, spitz_ac; + +extern int sharpsl_pm_pxa_read_max1111(int channel); + +int basic_current = 125; /* miliAmp */ +int battery_resistance = 422; /* miliOhm */ + +/* 422 seems to be suitable for very old, 1Ah battery. + 2Ah battery probably has better resistance */ + +/* Unfortunately, resistance depends on state of charge, current + * direction and temperature. + * + * Ouch, and dependency is actually _not_ too simple. It is lowest + * at 3.55V, very slowly rises at 4V (approximately linear dependency), + * and quickly rises towards 3.2V (in something exponential-looking). + * + * It is about same at 25Celsius and 40Celsius, and about 2.5x the value + * on 0Celsius, rising _very_ sharply. + * + * Li-ion should only be charged between 0 and 45 Celsius, and discharged + * between -20 and 60 celsius. + */ + +extern int backlight_current; + +int battery_current(void) +{ + int intensity = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0; + + return basic_current + backlight_current; +} + +int liion_internal_voltage(int voltage, int current_ma) +{ + return voltage + (battery_resistance * current_ma / 1000); +} + +int liion_expected_voltage(int internal_voltage, int current_ma) +{ + return internal_voltage - (battery_resistance * current_ma / 1000); +} + +/* returns mV */ +int liion_voltage(void) +{ + /* Thanks to Stanislav B. ADC has 3.3V as reference, + is connected to battery over 47kOhm, + and to ground over 100kOhm. */ + return (sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT) * 147 * 33)/256; +} + +/* See for example http://www.kokam.com/english/biz/rc.html for + * voltage/capacity characteristic. I assume it is going to be + * reasonably similar to li-ion used in collie. + * + */ + +/* + { 420, 100 }, + { 417, 95 }, means it will report 100% between 418 and 420 + */ + +struct battery_thresh battery_levels[] = { + { 3980, 100 }, + { 3900, 95 }, + { 3860, 90 }, + { 3800, 85 }, + { 3760, 80 }, + { 3720, 74 }, + { 3680, 69 }, + { 3620, 65 }, + { 3570, 59 }, + { 3560, 55 }, + { 3550, 48 }, + { 3530, 45 }, + { 3510, 39 }, + { 3490, 33 }, + { 3470, 29 }, + { 3450, 23 }, + { 3410, 16 }, + { 0, 0 }, +}; + +int get_percentage(void) +{ + int i = ARRAY_SIZE(battery_levels); + struct battery_thresh *thresh; + int voltage = liion_internal_voltage(liion_voltage(), battery_current()); + + thresh = battery_levels; + + while (i > 0 && (voltage > thresh[i].voltage)) + i--; + + return thresh[i].percentage; +} + +static int spitz_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct spitz_bat *bat = container_of(psy, struct spitz_bat, psy); + + val->intval = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + /* POWER_SUPPLY_HEALTH_OVERHEAT , POWER_SUPPLY_HEALTH_COLD, + POWER_SUPPLY_HEALTH_OVERVOLTAGE, POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, POWER_SUPPLY_HEALTH_GOOD + */ + return 0; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + if (gpio_get_value(SPITZ_GPIO_CHRG_ON) == 0) { + if (gpio_get_value(SPITZ_GPIO_JK_B) == 1) + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + else + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + } + return 0; + case POWER_SUPPLY_PROP_STATUS: + { + int status = 0; + + if (gpio_get_value(SPITZ_GPIO_CHRG_ON) == 0) + printk("Chrg bit on. "); + if (gpio_get_value(SPITZ_GPIO_JK_B) == 0) + printk("Slow charge bit on. "); + + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else { + if (gpio_get_value(SPITZ_GPIO_CHRG_ON) == 0) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) + val->intval = POWER_SUPPLY_STATUS_FULL; + } + + printk("ACIN: %d ", sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)); + printk("Chrgfull: %d ", sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)); + printk("Fatal: %d ", sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)); + printk("ACIN_volt: %d\n", sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT)); + + return 0; + } + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = liion_voltage()*1000; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = 4200000; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = 3400000; + return 0; + case POWER_SUPPLY_PROP_TEMP: + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + sharpsl_pm.machinfo->measure_temp(1); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + val->intval = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP); + sharpsl_pm.machinfo->measure_temp(0); + /* 121: battery finished charging in 22C room */ + /* 141: outside at 6C */ + return 0; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = "spitz-battery"; + return 0; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = 1; + return 0; + /* add these */ + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = 2000000; + return 0; + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = get_percentage(); + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + val->intval = liion_internal_voltage(liion_voltage(), battery_current())*1000; + return 0; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = battery_current() * 1000; + return 0; + default: + return -EINVAL; + } + return -EINVAL; +} + +static int spitz_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct spitz_bat *bat = container_of(psy, struct spitz_bat, psy); + + val->intval = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + /* Thanks to Stanislav B. ADC has 3.3V as reference, + is connected to acin over 2kOhm, + and to ground over 1kOhm. */ + val->intval = (sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT) * 3000 * 3300)/256; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = 5250000; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = 4750000; + return 0; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = "spitz-power-supply"; + return 0; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); + return 0; + default: + return -EINVAL; + } + return -EINVAL; +} + +static void spitz_bat_external_power_changed(struct power_supply *psy) +{ +} + + +static enum power_supply_property spitz_bat_main_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, +}; + +static struct spitz_bat spitz_bat_main = { + .psy = { + .name = "main-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = spitz_bat_main_props, + .num_properties = ARRAY_SIZE(spitz_bat_main_props), + .get_property = spitz_bat_get_property, + .external_power_changed = spitz_bat_external_power_changed, + .use_for_apm = 1, + }, +}; + +static enum power_supply_property spitz_ac_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_PRESENT, +}; + +static struct spitz_bat spitz_ac = { + .psy = { + .name = "ac", + .type = POWER_SUPPLY_TYPE_MAINS, + .properties = spitz_ac_props, + .num_properties = ARRAY_SIZE(spitz_ac_props), + .get_property = spitz_ac_get_property, + }, +}; + +#ifdef CONFIG_PM +static int spitz_bat_suspend(struct platform_device *dev, pm_message_t state) +{ + return 0; +} + +static int spitz_bat_resume(struct platform_device *dev) +{ + return 0; +} +#else +#define spitz_bat_suspend NULL +#define spitz_bat_resume NULL +#endif + + +static ssize_t spitz_bat_limit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + sprintf(buf, "Hello :-)"); + return 9; +} + +static ssize_t spitz_bat_limit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + if (!strncmp(buf, "fastcharge", 10)) { + gpio_set_value(SPITZ_GPIO_JK_B, 1); + gpio_set_value(SPITZ_GPIO_CHRG_ON, 0); + return 10; + } + if (!strncmp(buf, "slowcharge", 10)) { + gpio_set_value(SPITZ_GPIO_JK_B, 0); + gpio_set_value(SPITZ_GPIO_CHRG_ON, 0); + return 10; + } + if (!strncmp(buf, "nonecharge", 10)) { + gpio_set_value(SPITZ_GPIO_JK_B, 0); + gpio_set_value(SPITZ_GPIO_CHRG_ON, 1); + return 10; + } + return -EINVAL; +} + + +static DEVICE_ATTR(limit, S_IRUGO | S_IWUSR, spitz_bat_limit_show, spitz_bat_limit_store); +#if 0 +static struct device_attribute dev_attr_limit = { + .attr = { .name = "limit", .mode = 0644 }, + .show = spitz_bat_limit_show, + .store = spitz_bat_limit_store, +}; +#endif + +static int __devinit spitz_bat_probe(struct platform_device *dev) +{ + int ret; + int i; + + if (!machine_is_spitz()) + return -ENODEV; + + printk("spitz_bat_probe: register\n"); + power_supply_register(&dev->dev, &spitz_bat_main.psy); + power_supply_register(&dev->dev, &spitz_ac.psy); + device_create_file(&dev->dev, &dev_attr_limit); + + return 0; +} + +static int __devexit spitz_bat_remove(struct platform_device *dev) +{ + int i; + + device_remove_file(&dev->dev, &dev_attr_limit); + power_supply_unregister(&spitz_bat_main.psy); + power_supply_unregister(&spitz_ac.psy); + return 0; +} + + +static struct platform_driver spitz_bat_driver = { + .driver.name = "spitz-battery", + .driver.owner = THIS_MODULE, + .probe = spitz_bat_probe, + .remove = __devexit_p(spitz_bat_remove), + .suspend = spitz_bat_suspend, + .resume = spitz_bat_resume, +}; + +static int __init spitz_bat_init(void) +{ + return platform_driver_register(&spitz_bat_driver); +} + +static void __exit spitz_bat_exit(void) +{ + platform_driver_unregister(&spitz_bat_driver); +} + +module_init(spitz_bat_init); +module_exit(spitz_bat_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Pavel Machek"); +MODULE_DESCRIPTION("Spitz battery driver"); +MODULE_ALIAS("platform:spitz-battery"); diff -ur ./drivers/video/backlight.ofic/corgi_lcd.c ./drivers/video/backlight/corgi_lcd.c --- ./drivers/video/backlight.ofic/corgi_lcd.c 2009-10-18 18:11:36.000000000 +0200 +++ ./drivers/video/backlight/corgi_lcd.c 2009-10-18 18:37:09.000000000 +0200 @@ -388,17 +388,33 @@ .set_mode = corgi_lcd_set_mode, }; -static int corgi_bl_get_intensity(struct backlight_device *bd) +int corgi_bl_get_intensity(struct backlight_device *bd) { struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev); return lcd->intensity; } +EXPORT_SYMBOL(corgi_bl_get_intensity); + +int backlight_current; +EXPORT_SYMBOL(backlight_current); static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity) { int cont; + backlight_current = 0; + if (intensity > 0) + backlight_current = 55; + if (intensity > 10) + backlight_current = 115; + if (intensity > 20) + backlight_current = 140; + if (intensity > 30) + backlight_current = 180; + if (intensity > 45) + backlight_current = 245; + if (intensity > 0x10) intensity += 0x10; @@ -433,8 +449,9 @@ if (corgibl_flags & CORGIBL_SUSPENDED) intensity = 0; - if (corgibl_flags & CORGIBL_BATTLOW) - intensity &= lcd->limit_mask; + + if ((corgibl_flags & CORGIBL_BATTLOW) && intensity > lcd->limit_mask) + intensity = lcd->limit_mask; return corgi_bl_set_intensity(lcd, intensity); } diff -ur ./arch/arm.ofic/mach-pxa/corgi_pm.c ./arch/arm/mach-pxa/corgi_pm.c --- ./arch/arm.ofic/mach-pxa/corgi_pm.c 2009-09-10 00:13:59.000000000 +0200 +++ ./arch/arm/mach-pxa/corgi_pm.c 2009-10-22 19:19:02.000000000 +0200 @@ -35,6 +35,92 @@ #define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ #define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ +static const struct battery_thresh corgi_battery_levels_acin[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 192, 45}, + { 191, 43}, + { 191, 40}, + { 190, 38}, + { 190, 35}, + { 189, 33}, + { 188, 30}, + { 187, 28}, + { 186, 25}, + { 185, 23}, + { 184, 20}, + { 183, 18}, + { 182, 15}, + { 181, 13}, + { 180, 10}, + { 179, 8}, + { 178, 5}, + { 0, 0}, +}; + +static const struct battery_thresh corgi_battery_levels_noac[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 191, 45}, + { 190, 43}, + { 189, 40}, + { 188, 38}, + { 187, 35}, + { 186, 33}, + { 185, 30}, + { 184, 28}, + { 183, 25}, + { 182, 23}, + { 181, 20}, + { 180, 18}, + { 179, 15}, + { 178, 13}, + { 177, 10}, + { 176, 8}, + { 175, 5}, + { 0, 0}, +}; + static void corgi_charger_init(void) { pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT); @@ -214,8 +300,8 @@ .fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT, .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT, .bat_levels = 40, - .bat_levels_noac = spitz_battery_levels_noac, - .bat_levels_acin = spitz_battery_levels_acin, + .bat_levels_noac = corgi_battery_levels_noac, + .bat_levels_acin = corgi_battery_levels_acin, .status_high_acin = 188, .status_low_acin = 178, .status_high_noac = 185, diff -ur ./arch/arm.ofic/mach-pxa/sharpsl.h ./arch/arm/mach-pxa/sharpsl.h --- ./arch/arm.ofic/mach-pxa/sharpsl.h 2009-09-10 00:13:59.000000000 +0200 +++ ./arch/arm/mach-pxa/sharpsl.h 2009-10-14 12:12:13.000000000 +0200 @@ -42,8 +42,23 @@ #define MAX1111_BATT_TEMP 2u #define MAX1111_ACIN_VOLT 6u -extern struct battery_thresh spitz_battery_levels_acin[]; -extern struct battery_thresh spitz_battery_levels_noac[]; int sharpsl_pm_pxa_read_max1111(int channel); +/* + * Constants + */ +#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ +#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ +#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ +#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ + +#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ +#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ +#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ +#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ +#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ + Only in ./arch/arm/mach-pxa: sharpsl.h~ diff -ur ./arch/arm.ofic/mach-pxa/sharpsl_pm.c ./arch/arm/mach-pxa/sharpsl_pm.c --- ./arch/arm.ofic/mach-pxa/sharpsl_pm.c 2009-10-06 13:48:07.000000000 +0200 +++ ./arch/arm/mach-pxa/sharpsl_pm.c 2009-10-14 12:12:05.000000000 +0200 @@ -32,25 +32,10 @@ #include #include #include +#include #include "sharpsl.h" -/* - * Constants - */ -#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ -#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ -#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ -#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ - -#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ -#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ -#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ -#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ -#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ /* * Prototypes @@ -72,112 +57,28 @@ * Variables */ struct sharpsl_pm_status sharpsl_pm; +EXPORT_SYMBOL(sharpsl_pm); static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle); static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread); DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger); -struct battery_thresh spitz_battery_levels_acin[] = { - { 213, 100}, - { 212, 98}, - { 211, 95}, - { 210, 93}, - { 209, 90}, - { 208, 88}, - { 207, 85}, - { 206, 83}, - { 205, 80}, - { 204, 78}, - { 203, 75}, - { 202, 73}, - { 201, 70}, - { 200, 68}, - { 199, 65}, - { 198, 63}, - { 197, 60}, - { 196, 58}, - { 195, 55}, - { 194, 53}, - { 193, 50}, - { 192, 48}, - { 192, 45}, - { 191, 43}, - { 191, 40}, - { 190, 38}, - { 190, 35}, - { 189, 33}, - { 188, 30}, - { 187, 28}, - { 186, 25}, - { 185, 23}, - { 184, 20}, - { 183, 18}, - { 182, 15}, - { 181, 13}, - { 180, 10}, - { 179, 8}, - { 178, 5}, - { 0, 0}, -}; - -struct battery_thresh spitz_battery_levels_noac[] = { - { 213, 100}, - { 212, 98}, - { 211, 95}, - { 210, 93}, - { 209, 90}, - { 208, 88}, - { 207, 85}, - { 206, 83}, - { 205, 80}, - { 204, 78}, - { 203, 75}, - { 202, 73}, - { 201, 70}, - { 200, 68}, - { 199, 65}, - { 198, 63}, - { 197, 60}, - { 196, 58}, - { 195, 55}, - { 194, 53}, - { 193, 50}, - { 192, 48}, - { 191, 45}, - { 190, 43}, - { 189, 40}, - { 188, 38}, - { 187, 35}, - { 186, 33}, - { 185, 30}, - { 184, 28}, - { 183, 25}, - { 182, 23}, - { 181, 20}, - { 180, 18}, - { 179, 15}, - { 178, 13}, - { 177, 10}, - { 176, 8}, - { 175, 5}, - { 0, 0}, -}; - /* MAX1111 Commands */ -#define MAXCTRL_PD0 1u << 0 -#define MAXCTRL_PD1 1u << 1 -#define MAXCTRL_SGL 1u << 2 -#define MAXCTRL_UNI 1u << 3 +#define MAXCTRL_PD0 (1u << 0) +#define MAXCTRL_PD1 (1u << 1) +#define MAXCTRL_SGL (1u << 2) +#define MAXCTRL_UNI (1u << 3) #define MAXCTRL_SEL_SH 4 -#define MAXCTRL_STR 1u << 7 +#define MAXCTRL_STR (1u << 7) /* * Read MAX1111 ADC */ int sharpsl_pm_pxa_read_max1111(int channel) { - if (machine_is_tosa()) // Ugly, better move this function into another module + /* Ugly, better move this function into another module */ + if (machine_is_tosa()) return 0; #ifdef CONFIG_CORGI_SSP_DEPRECATED @@ -193,7 +94,7 @@ #endif } -static int get_percentage(int voltage) +int get_percentage(int voltage) { int i = sharpsl_pm.machinfo->bat_levels - 1; int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0; @@ -209,6 +110,7 @@ return thresh[i].percentage; } +EXPORT_SYMBOL(get_percentage); static int get_apm_status(int voltage) { @@ -238,7 +140,7 @@ static void sharpsl_battery_thread(struct work_struct *private_) { - int voltage, percent, apm_status, i = 0; + int voltage, percent, apm_status, i; if (!sharpsl_pm.machinfo) return; @@ -250,15 +152,14 @@ && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) schedule_delayed_work(&toggle_charger, 0); - while(1) { + for (i = 0; i < 5; i++) { voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - - if (voltage > 0) break; - if (i++ > 5) { - voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; - dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); + if (voltage > 0) break; - } + } + if (voltage <= 0) { + voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; + dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); } voltage = sharpsl_average_value(voltage); @@ -266,8 +167,10 @@ percent = get_percentage(voltage); /* At low battery voltages, the voltage has a tendency to start - creeping back up so we try to avoid this here */ - if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { + creeping back up so we try to avoid this here */ + if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) + || (apm_status == APM_BATTERY_STATUS_HIGH) + || percent <= sharpsl_pm.battstat.mainbat_percent) { sharpsl_pm.battstat.mainbat_voltage = voltage; sharpsl_pm.battstat.mainbat_status = apm_status; sharpsl_pm.battstat.mainbat_percent = percent; @@ -279,8 +182,8 @@ #ifdef CONFIG_BACKLIGHT_CORGI /* If battery is low. limit backlight intensity to save power. */ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || - (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { + && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) + || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { sharpsl_pm.machinfo->backlight_limit(1); sharpsl_pm.flags |= SHARPSL_BL_LIMIT; @@ -293,8 +196,8 @@ /* Suspend if critical battery level */ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) - && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { + && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) + && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { sharpsl_pm.flags |= SHARPSL_APM_QUEUED; dev_err(sharpsl_pm.dev, "Fatal Off\n"); apm_queue_event(APM_CRITICAL_SUSPEND); @@ -339,6 +242,8 @@ static void sharpsl_charge_error(void) { + dev_warn(sharpsl_pm.dev, "Charger Error\n"); + sharpsl_pm_led(SHARPSL_LED_ERROR); sharpsl_pm.machinfo->charge(0); sharpsl_pm.charge_mode = CHRG_ERROR; @@ -346,7 +251,7 @@ static void sharpsl_charge_toggle(struct work_struct *private_) { - dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); + dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies); if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { sharpsl_charge_off(); @@ -368,7 +273,7 @@ { int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); - dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); + dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin); sharpsl_average_clear(); if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) @@ -472,14 +377,14 @@ sharpsl_ad[sharpsl_ad_index] = ad; sharpsl_ad_index++; if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { - for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) + for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) sharpsl_ad[i] = sharpsl_ad[i+1]; sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; } - for (i=0; i < sharpsl_ad_index; i++) + for (i = 0; i < sharpsl_ad_index; i++) ad_val += sharpsl_ad[i]; - return (ad_val / sharpsl_ad_index); + return ad_val / sharpsl_ad_index; } /* @@ -492,8 +397,8 @@ /* Find MAX val */ temp = val[0]; - j=0; - for (i=1; i<5; i++) { + j = 0; + for (i = 1; i < 5; i++) { if (temp < val[i]) { temp = val[i]; j = i; @@ -502,21 +407,21 @@ /* Find MIN val */ temp = val[4]; - k=4; - for (i=3; i>=0; i--) { + k = 4; + for (i = 3; i >= 0; i--) { if (temp > val[i]) { temp = val[i]; k = i; } } - for (i=0; i<5; i++) - if (i != j && i != k ) + for (i = 0; i < 5; i++) + if (i != j && i != k) sum += val[i]; dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); - return (sum/3); + return sum/3; } static int sharpsl_check_battery_temp(void) @@ -524,7 +429,7 @@ int val, i, buff[5]; /* Check battery temperature */ - for (i=0; i<5; i++) { + for (i = 0; i < 5; i++) { mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); sharpsl_pm.machinfo->measure_temp(1); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); @@ -535,8 +440,10 @@ val = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); - if (val > sharpsl_pm.machinfo->charge_on_temp) { - printk(KERN_WARNING "Not charging: temperature out of limits.\n"); + /* FIXME: this should catch battery read errors, but we should + probably avoid charging in <0C temperatures, too. */ + if ((val < 0) || (val > sharpsl_pm.machinfo->charge_on_temp)) { + dev_warn(sharpsl_pm.dev, "Not charging: temperature %d out of limits.\n", val); return -1; } @@ -557,7 +464,7 @@ sharpsl_pm.machinfo->discharge1(1); /* Check battery voltage */ - for (i=0; i<5; i++) { + for (i = 0; i < 5; i++) { buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); } @@ -581,16 +488,16 @@ { int temp, i, buff[5]; - for (i=0; i<5; i++) { + for (i = 0; i < 5; i++) { buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); } temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); + dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp); if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) { - dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); + dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp); return -1; } @@ -624,9 +531,9 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) { - dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); + dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR); - dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); + dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); /* not charging and AC-IN! */ if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) { @@ -644,12 +551,12 @@ if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { RTSR &= RTSR_ALE; RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; - dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); + dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR); sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; } else if (alarm_enable) { RTSR &= RTSR_ALE; RTAR = alarm_time; - dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); + dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR); } else { dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); } @@ -658,19 +565,20 @@ sharpsl_pm.machinfo->postsuspend(); - dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); + + dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR); } static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) { - if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) - { + return 0; + if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) { if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); corgi_goto_sleep(alarm_time, alarm_enable, state); return 1; } - if(sharpsl_off_charge_battery()) { + if (sharpsl_off_charge_battery()) { dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); corgi_goto_sleep(alarm_time, alarm_enable, state); return 1; @@ -697,7 +605,7 @@ corgi_goto_sleep(alarm_time, alarm_status, state); - while (corgi_enter_suspend(alarm_time,alarm_status,state)) + while (corgi_enter_suspend(alarm_time, alarm_status, state)) {} if (sharpsl_pm.machinfo->earlyresume) @@ -732,7 +640,7 @@ sharpsl_pm.machinfo->discharge1(1); /* Check battery : check inserting battery ? */ - for (i=0; i<5; i++) { + for (i = 0; i < 5; i++) { buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); } @@ -812,7 +720,7 @@ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); time = RCNR; - while(1) { + while (1) { /* Check if any wakeup event had occurred */ if (sharpsl_pm.machinfo->charger_wakeup() != 0) return 0; @@ -835,9 +743,9 @@ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); time = RCNR; - while(1) { + while (1) { /* Check if any wakeup event had occurred */ - if (sharpsl_pm.machinfo->charger_wakeup() != 0) + if (sharpsl_pm.machinfo->charger_wakeup()) return 0; /* Check for timeout */ if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { @@ -864,12 +772,12 @@ static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) { - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); + return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent); } static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) { - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); + return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage); } static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); @@ -943,7 +851,6 @@ } } - if (sharpsl_pm.machinfo->batfull_irq) - { + if (sharpsl_pm.machinfo->batfull_irq) { /* Register interrupt handler. */ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) { diff -ur ./arch/arm.ofic/mach-pxa/spitz.c ./arch/arm/mach-pxa/spitz.c --- ./arch/arm.ofic/mach-pxa/spitz.c 2009-10-06 13:48:07.000000000 +0200 +++ ./arch/arm/mach-pxa/spitz.c 2009-10-14 11:01:36.000000000 +0200 @@ -686,12 +733,19 @@ .dev.platform_data = &sharpsl_rom_data, }; +static struct platform_device spitz_battery_device = { + .name = "spitz-battery", + .id = -1, +}; + + static struct platform_device *devices[] __initdata = { &spitzscoop_device, &spitzkbd_device, &spitzled_device, &sharpsl_nand_device, &sharpsl_rom_device, + &spitz_battery_device, }; static void spitz_poweroff(void) --- ./arch/arm.ofic/mach-pxa/spitz_pm.c 2009-09-10 00:13:59.000000000 +0200 +++ ./arch/arm/mach-pxa/spitz_pm.c 2009-10-19 07:28:42.000000000 +0200 @@ -37,6 +37,93 @@ static int spitz_last_ac_status; +static const struct battery_thresh spitz_battery_levels_acin[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 192, 45}, + { 191, 43}, + { 191, 40}, + { 190, 38}, + { 190, 35}, + { 189, 33}, + { 188, 30}, + { 187, 28}, + { 186, 25}, + { 185, 23}, + { 184, 20}, + { 183, 18}, + { 182, 15}, + { 181, 13}, + { 180, 10}, + { 179, 8}, + { 178, 5}, + { 0, 0}, +}; + +static const struct battery_thresh spitz_battery_levels_noac[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 191, 45}, + { 190, 43}, + { 189, 40}, + { 188, 38}, + { 187, 35}, + { 186, 33}, + { 185, 30}, + { 184, 28}, + { 183, 25}, + { 182, 23}, + { 181, 20}, + { 180, 18}, + { 179, 15}, + { 178, 13}, + { 177, 10}, + { 176, 8}, + { 175, 5}, + { 0, 0}, +}; + + static void spitz_charger_init(void) { pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); @@ -103,7 +190,7 @@ PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC; PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); - PKSR = 0xffffffff; // clear + PKSR = 0xffffffff; /* clear */ /* nRESET_OUT Disable */ PSLR |= PSLR_SL_ROD; @@ -149,7 +236,7 @@ if (resume_on_alarm && (PEDR & PWER_RTC)) is_resume |= PWER_RTC; - dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume); + dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume); return is_resume; } @@ -160,15 +247,15 @@ unsigned long spitzpm_read_devdata(int type) { - switch(type) { + switch (type) { case SHARPSL_STATUS_ACIN: return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); case SHARPSL_STATUS_LOCK: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock); + return !!READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull); + return !!READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull); case SHARPSL_STATUS_FATAL: - return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal); + return !!READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal); case SHARPSL_ACIN_VOLT: return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT); case SHARPSL_BATT_TEMP: @@ -179,6 +266,11 @@ } } +int backlight_get_status(void) +{ + return 0; +} + struct sharpsl_charger_machinfo spitz_pm_machinfo = { .init = spitz_charger_init, .exit = NULL, @@ -199,8 +291,9 @@ #if defined(CONFIG_LCD_CORGI) .backlight_limit = corgi_lcd_limit_intensity, #elif defined(CONFIG_BACKLIGHT_CORGI) - .backlight_limit = corgibl_limit_intensity, + .backlight_limit = corgibl_limit_intensity, #endif +// .backlight_get_status = backlight_get_status, .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH, @@ -241,7 +334,7 @@ static void spitzpm_exit(void) { - platform_device_unregister(spitzpm_device); + platform_device_unregister(spitzpm_device); } module_init(spitzpm_init); -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/