Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756297AbZKIQcw (ORCPT ); Mon, 9 Nov 2009 11:32:52 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756236AbZKIQcs (ORCPT ); Mon, 9 Nov 2009 11:32:48 -0500 Received: from ey-out-2122.google.com ([74.125.78.25]:32503 "EHLO ey-out-2122.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756096AbZKIQcc (ORCPT ); Mon, 9 Nov 2009 11:32:32 -0500 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:cc:mime-version:content-type :content-transfer-encoding:message-id; b=aksE1eCkN1WkAyJudRtlxnXMiMvuA83H1dQk0roxw0YzmXtMHrQAyqsOmJcczp1zbx U7wXA5lDQOY6xgEdc4qNS1KVIyJW4qsm9fwjjcyQe1hMCMq3Xz+95dpJQ4EP/liFqp3s zjwHRmsLD70vaeFr+RGX27EWS/HU6bdAuHVGk= From: Bartlomiej Zolnierkiewicz To: Greg KH Subject: [PATCH] Staging: rt28x0: remove no longer needed common/cmm_data_2860.c Date: Mon, 9 Nov 2009 17:20:39 +0100 User-Agent: KMail/1.12.2 (Linux/2.6.31.5-96.fc12.x86_64; KDE/4.3.2; x86_64; ; ) Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <200911091720.39821.bzolnier@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 36790 Lines: 1217 From: Bartlomiej Zolnierkiewicz Subject: [PATCH] Staging: rt28x0: remove no longer needed common/cmm_data_2860.c Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/staging/rt2860/common/cmm_data_2860.c | 1199 -------------------------- 1 file changed, 1199 deletions(-) Index: b/drivers/staging/rt2860/common/cmm_data_2860.c =================================================================== --- a/drivers/staging/rt2860/common/cmm_data_2860.c +++ /dev/null @@ -1,1199 +0,0 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* -*/ - -/* - All functions in this file must be PCI-depended, or you should out your function - in other files. - -*/ -#include "../rt_config.h" - -extern RTMP_RF_REGS RF2850RegTable[]; -extern UCHAR NUM_OF_2850_CHNL; - -USHORT RtmpPCI_WriteTxResource( - IN PRTMP_ADAPTER pAd, - IN TX_BLK *pTxBlk, - IN BOOLEAN bIsLast, - OUT USHORT *FreeNumber) -{ - - UCHAR *pDMAHeaderBufVA; - USHORT TxIdx, RetTxIdx; - PTXD_STRUC pTxD; - UINT32 BufBasePaLow; - PRTMP_TX_RING pTxRing; - USHORT hwHeaderLen; - - // - // get Tx Ring Resource - // - pTxRing = &pAd->TxRing[pTxBlk->QueIdx]; - TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx; - pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa; - BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa); - - // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer - if (pTxBlk->TxFrameType == TX_AMSDU_FRAME) - { - hwHeaderLen = pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD + pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD; - } - else - { - hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen; - } - NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHeaderLen); - - pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket; - pTxRing->Cell[TxIdx].pNextNdisPacket = NULL; - - // - // build Tx Descriptor - // - - pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; - NdisZeroMemory(pTxD, TXD_SIZE); - - pTxD->SDPtr0 = BufBasePaLow; - pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; // include padding - pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);; - pTxD->SDLen1 = pTxBlk->SrcBufLen; - pTxD->LastSec0 = 0; - pTxD->LastSec1 = (bIsLast) ? 1 : 0; - - RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA); - - RetTxIdx = TxIdx; - // - // Update Tx index - // - INC_RING_INDEX(TxIdx, TX_RING_SIZE); - pTxRing->TxCpuIdx = TxIdx; - - *FreeNumber -= 1; - - return RetTxIdx; -} - - -USHORT RtmpPCI_WriteSingleTxResource( - IN PRTMP_ADAPTER pAd, - IN TX_BLK *pTxBlk, - IN BOOLEAN bIsLast, - OUT USHORT *FreeNumber) -{ - - UCHAR *pDMAHeaderBufVA; - USHORT TxIdx, RetTxIdx; - PTXD_STRUC pTxD; - UINT32 BufBasePaLow; - PRTMP_TX_RING pTxRing; - USHORT hwHeaderLen; - - // - // get Tx Ring Resource - // - pTxRing = &pAd->TxRing[pTxBlk->QueIdx]; - TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx; - pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa; - BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa); - - // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer - hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen; - - NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHeaderLen); - - pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket; - pTxRing->Cell[TxIdx].pNextNdisPacket = NULL; - - // - // build Tx Descriptor - // - pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; - - NdisZeroMemory(pTxD, TXD_SIZE); - - pTxD->SDPtr0 = BufBasePaLow; - pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; // include padding - pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);; - pTxD->SDLen1 = pTxBlk->SrcBufLen; - pTxD->LastSec0 = 0; - pTxD->LastSec1 = (bIsLast) ? 1 : 0; - - RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA); - - RetTxIdx = TxIdx; - // - // Update Tx index - // - INC_RING_INDEX(TxIdx, TX_RING_SIZE); - pTxRing->TxCpuIdx = TxIdx; - - *FreeNumber -= 1; - - return RetTxIdx; -} - - -USHORT RtmpPCI_WriteMultiTxResource( - IN PRTMP_ADAPTER pAd, - IN TX_BLK *pTxBlk, - IN UCHAR frameNum, - OUT USHORT *FreeNumber) -{ - BOOLEAN bIsLast; - UCHAR *pDMAHeaderBufVA; - USHORT TxIdx, RetTxIdx; - PTXD_STRUC pTxD; - UINT32 BufBasePaLow; - PRTMP_TX_RING pTxRing; - USHORT hwHdrLen; - UINT32 firstDMALen; - - bIsLast = ((frameNum == (pTxBlk->TotalFrameNum - 1)) ? 1 : 0); - - // - // get Tx Ring Resource - // - pTxRing = &pAd->TxRing[pTxBlk->QueIdx]; - TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx; - pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa; - BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa); - - if (frameNum == 0) - { - // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer - if (pTxBlk->TxFrameType == TX_AMSDU_FRAME) - //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD; - hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD + pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD; - else if (pTxBlk->TxFrameType == TX_RALINK_FRAME) - //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD; - hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_ARALINK_HEADER_FIELD + pTxBlk->HdrPadLen + LENGTH_ARALINK_HEADER_FIELD; - else - //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4); - hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen; - - firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHdrLen; - } - else - { - firstDMALen = pTxBlk->MpduHeaderLen; - } - - NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen); - - pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket; - pTxRing->Cell[TxIdx].pNextNdisPacket = NULL; - - // - // build Tx Descriptor - // - pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; - - NdisZeroMemory(pTxD, TXD_SIZE); - - pTxD->SDPtr0 = BufBasePaLow; - pTxD->SDLen0 = firstDMALen; // include padding - pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);; - pTxD->SDLen1 = pTxBlk->SrcBufLen; - pTxD->LastSec0 = 0; - pTxD->LastSec1 = (bIsLast) ? 1 : 0; - - RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA); - - RetTxIdx = TxIdx; - // - // Update Tx index - // - INC_RING_INDEX(TxIdx, TX_RING_SIZE); - pTxRing->TxCpuIdx = TxIdx; - - *FreeNumber -= 1; - - return RetTxIdx; - -} - - -VOID RtmpPCI_FinalWriteTxResource( - IN PRTMP_ADAPTER pAd, - IN TX_BLK *pTxBlk, - IN USHORT totalMPDUSize, - IN USHORT FirstTxIdx) -{ - - PTXWI_STRUC pTxWI; - PRTMP_TX_RING pTxRing; - - // - // get Tx Ring Resource - // - pTxRing = &pAd->TxRing[pTxBlk->QueIdx]; - pTxWI = (PTXWI_STRUC) pTxRing->Cell[FirstTxIdx].DmaBuf.AllocVa; - pTxWI->MPDUtotalByteCount = totalMPDUSize; -} - - -VOID RtmpPCIDataLastTxIdx( - IN PRTMP_ADAPTER pAd, - IN UCHAR QueIdx, - IN USHORT LastTxIdx) -{ - PTXD_STRUC pTxD; - PRTMP_TX_RING pTxRing; - - // - // get Tx Ring Resource - // - pTxRing = &pAd->TxRing[QueIdx]; - - // - // build Tx Descriptor - // - pTxD = (PTXD_STRUC) pTxRing->Cell[LastTxIdx].AllocVa; - - pTxD->LastSec1 = 1; -} - - -USHORT RtmpPCI_WriteFragTxResource( - IN PRTMP_ADAPTER pAd, - IN TX_BLK *pTxBlk, - IN UCHAR fragNum, - OUT USHORT *FreeNumber) -{ - UCHAR *pDMAHeaderBufVA; - USHORT TxIdx, RetTxIdx; - PTXD_STRUC pTxD; - UINT32 BufBasePaLow; - PRTMP_TX_RING pTxRing; - USHORT hwHeaderLen; - UINT32 firstDMALen; - - // - // Get Tx Ring Resource - // - pTxRing = &pAd->TxRing[pTxBlk->QueIdx]; - TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx; - pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa; - BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa); - - // - // Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer - // - hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen; - - firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; - NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen); - - - // - // Build Tx Descriptor - // - pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; - - NdisZeroMemory(pTxD, TXD_SIZE); - - if (fragNum == pTxBlk->TotalFragNum) - { - pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket; - pTxRing->Cell[TxIdx].pNextNdisPacket = NULL; - } - - pTxD->SDPtr0 = BufBasePaLow; - pTxD->SDLen0 = firstDMALen; // include padding - pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE); - pTxD->SDLen1 = pTxBlk->SrcBufLen; - pTxD->LastSec0 = 0; - pTxD->LastSec1 = 1; - - RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA); - - RetTxIdx = TxIdx; - pTxBlk->Priv += pTxBlk->SrcBufLen; - - // - // Update Tx index - // - INC_RING_INDEX(TxIdx, TX_RING_SIZE); - pTxRing->TxCpuIdx = TxIdx; - - *FreeNumber -= 1; - - return RetTxIdx; - -} - -/* - Must be run in Interrupt context - This function handle PCI specific TxDesc and cpu index update and kick the packet out. - */ -int RtmpPCIMgmtKickOut( - IN RTMP_ADAPTER *pAd, - IN UCHAR QueIdx, - IN PNDIS_PACKET pPacket, - IN PUCHAR pSrcBufVA, - IN UINT SrcBufLen) -{ - PTXD_STRUC pTxD; - ULONG SwIdx = pAd->MgmtRing.TxCpuIdx; - - pTxD = (PTXD_STRUC) pAd->MgmtRing.Cell[SwIdx].AllocVa; - if (!pTxD) - return 0; - - pAd->MgmtRing.Cell[SwIdx].pNdisPacket = pPacket; - pAd->MgmtRing.Cell[SwIdx].pNextNdisPacket = NULL; - - RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_MGMT); - pTxD->LastSec0 = 1; - pTxD->LastSec1 = 1; - pTxD->DMADONE = 0; - pTxD->SDLen1 = 0; - pTxD->SDPtr0 = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);; - pTxD->SDLen0 = SrcBufLen; - - pAd->RalinkCounters.KickTxCount++; - pAd->RalinkCounters.OneSecTxDoneCount++; - - // Increase TX_CTX_IDX, but write to register later. - INC_RING_INDEX(pAd->MgmtRing.TxCpuIdx, MGMT_RING_SIZE); - - RTMP_IO_WRITE32(pAd, TX_MGMTCTX_IDX, pAd->MgmtRing.TxCpuIdx); - - return 0; -} - -/* - ======================================================================== - - Routine Description: - Check Rx descriptor, return NDIS_STATUS_FAILURE if any error dound - - Arguments: - pRxD Pointer to the Rx descriptor - - Return Value: - NDIS_STATUS_SUCCESS No err - NDIS_STATUS_FAILURE Error - - Note: - - ======================================================================== -*/ -NDIS_STATUS RTMPCheckRxError( - IN PRTMP_ADAPTER pAd, - IN PHEADER_802_11 pHeader, - IN PRXWI_STRUC pRxWI, - IN PRT28XX_RXD_STRUC pRxD) -{ - PCIPHER_KEY pWpaKey; - INT dBm; - - // Phy errors & CRC errors - if (/*(pRxD->PhyErr) ||*/ (pRxD->Crc)) - { - // Check RSSI for Noise Hist statistic collection. - dBm = (INT) (pRxWI->RSSI0) - pAd->BbpRssiToDbmDelta; - if (dBm <= -87) - pAd->StaCfg.RPIDensity[0] += 1; - else if (dBm <= -82) - pAd->StaCfg.RPIDensity[1] += 1; - else if (dBm <= -77) - pAd->StaCfg.RPIDensity[2] += 1; - else if (dBm <= -72) - pAd->StaCfg.RPIDensity[3] += 1; - else if (dBm <= -67) - pAd->StaCfg.RPIDensity[4] += 1; - else if (dBm <= -62) - pAd->StaCfg.RPIDensity[5] += 1; - else if (dBm <= -57) - pAd->StaCfg.RPIDensity[6] += 1; - else if (dBm > -57) - pAd->StaCfg.RPIDensity[7] += 1; - - return(NDIS_STATUS_FAILURE); - } - - // Add Rx size to channel load counter, we should ignore error counts - pAd->StaCfg.CLBusyBytes += (pRxD->SDL0 + 14); - - // Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics - if (pHeader != NULL) - { - if (pHeader->FC.ToDs) - { - return(NDIS_STATUS_FAILURE); - } - } - - // Drop not U2M frames, cant's drop here because we will drop beacon in this case - // I am kind of doubting the U2M bit operation - // if (pRxD->U2M == 0) - // return(NDIS_STATUS_FAILURE); - - // drop decyption fail frame - if (pRxD->CipherErr) - { - if (pRxD->CipherErr == 2) - {DBGPRINT_RAW(RT_DEBUG_TRACE,("pRxD ERROR: ICV ok but MICErr "));} - else if (pRxD->CipherErr == 1) - {DBGPRINT_RAW(RT_DEBUG_TRACE,("pRxD ERROR: ICV Err "));} - else if (pRxD->CipherErr == 3) - DBGPRINT_RAW(RT_DEBUG_TRACE,("pRxD ERROR: Key not valid ")); - - if (((pRxD->CipherErr & 1) == 1) && pAd->CommonCfg.bWirelessEvent && INFRA_ON(pAd)) - RTMPSendWirelessEvent(pAd, IW_ICV_ERROR_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); - - DBGPRINT_RAW(RT_DEBUG_TRACE,(" %d (len=%d, Mcast=%d, MyBss=%d, Wcid=%d, KeyId=%d)\n", - pRxD->CipherErr, - pRxD->SDL0, - pRxD->Mcast | pRxD->Bcast, - pRxD->MyBss, - pRxWI->WirelessCliID, - pRxWI->KeyIndex)); - - // - // MIC Error - // - if (pRxD->CipherErr == 2) - { - pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex]; - - if (pAd->StaCfg.WpaSupplicantUP) - WpaSendMicFailureToWpaSupplicant(pAd, - (pWpaKey->Type == PAIRWISEKEY) ? TRUE:FALSE); - else - RTMPReportMicError(pAd, pWpaKey); - - if (((pRxD->CipherErr & 2) == 2) && pAd->CommonCfg.bWirelessEvent && INFRA_ON(pAd)) - RTMPSendWirelessEvent(pAd, IW_MIC_ERROR_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); - - DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error\n")); - } - - if (pHeader == NULL) - return(NDIS_STATUS_SUCCESS); - - return(NDIS_STATUS_FAILURE); - } - - return(NDIS_STATUS_SUCCESS); -} - -/* - ========================================================================== - Description: - This routine sends command to firmware and turn our chip to power save mode. - Both RadioOff and .11 power save function needs to call this routine. - Input: - Level = GUIRADIO_OFF : GUI Radio Off mode - Level = DOT11POWERSAVE : 802.11 power save mode - Level = RTMP_HALT : When Disable device. - - ========================================================================== - */ -VOID RT28xxPciAsicRadioOff( - IN PRTMP_ADAPTER pAd, - IN UCHAR Level, - IN USHORT TbttNumToNextWakeUp) -{ - WPDMA_GLO_CFG_STRUC DmaCfg; - UCHAR i, tempBBP_R3 = 0; - BOOLEAN brc = FALSE, Cancelled; - UINT32 TbTTTime = 0; - UINT32 PsPollTime = 0, MACValue; - ULONG BeaconPeriodTime; - UINT32 RxDmaIdx, RxCpuIdx; - DBGPRINT(RT_DEBUG_TRACE, ("AsicRadioOff ===> TxCpuIdx = %d, TxDmaIdx = %d. RxCpuIdx = %d, RxDmaIdx = %d.\n", pAd->TxRing[0].TxCpuIdx, pAd->TxRing[0].TxDmaIdx, pAd->RxRing.RxCpuIdx, pAd->RxRing.RxDmaIdx)); - - // Check Rx DMA busy status, if more than half is occupied, give up this radio off. - RTMP_IO_READ32(pAd, RX_DRX_IDX , &RxDmaIdx); - RTMP_IO_READ32(pAd, RX_CRX_IDX , &RxCpuIdx); - if ((RxDmaIdx > RxCpuIdx) && ((RxDmaIdx - RxCpuIdx) > RX_RING_SIZE/3)) - { - DBGPRINT(RT_DEBUG_TRACE, ("AsicRadioOff ===> return1. RxDmaIdx = %d , RxCpuIdx = %d. \n", RxDmaIdx, RxCpuIdx)); - return; - } - else if ((RxCpuIdx >= RxDmaIdx) && ((RxCpuIdx - RxDmaIdx) < RX_RING_SIZE/3)) - { - DBGPRINT(RT_DEBUG_TRACE, ("AsicRadioOff ===> return2. RxCpuIdx = %d. RxDmaIdx = %d , \n", RxCpuIdx, RxDmaIdx)); - return; - } - - // Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops. - RTMP_SET_PSFLAG(pAd, fRTMP_PS_DISABLE_TX); - - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) - { - RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); - RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); - - if (Level == DOT11POWERSAVE) - { - RTMP_IO_READ32(pAd, TBTT_TIMER, &TbTTTime); - TbTTTime &= 0x1ffff; - // 00. check if need to do sleep in this DTIM period. If next beacon will arrive within 30ms , ...doesn't necessarily sleep. - // TbTTTime uint = 64us, LEAD_TIME unit = 1024us, PsPollTime unit = 1ms - if (((64*TbTTTime) <((LEAD_TIME*1024) + 40000)) && (TbttNumToNextWakeUp == 0)) - { - DBGPRINT(RT_DEBUG_TRACE, ("TbTTTime = 0x%x , give up this sleep. \n", TbTTTime)); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); - RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX); - return; - } - else - { - PsPollTime = (64*TbTTTime- LEAD_TIME*1024)/1000; - PsPollTime -= 3; - - BeaconPeriodTime = pAd->CommonCfg.BeaconPeriod*102/100; - if (TbttNumToNextWakeUp > 0) - PsPollTime += ((TbttNumToNextWakeUp -1) * BeaconPeriodTime); - - pAd->Mlme.bPsPollTimerRunning = TRUE; - RTMPSetTimer(&pAd->Mlme.PsPollTimer, PsPollTime); - } - } - } - - // 0. Disable Tx DMA. - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - DmaCfg.field.EnableTxDMA = 0; - RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word); - - // 1. Wait DMA not busy - i = 0; - do - { - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - if ((DmaCfg.field.TxDMABusy == 0) && (DmaCfg.field.RxDMABusy == 0)) - break; - RTMPusecDelay(20); - i++; - }while(i < 50); - - if (i >= 50) - { - DBGPRINT(RT_DEBUG_TRACE, ("DMA keeps busy. return on RT28xxPciAsicRadioOff ()\n")); - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - DmaCfg.field.EnableTxDMA = 1; - RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word); - pAd->CheckDmaBusyCount++; - return; - } - else - { - pAd->CheckDmaBusyCount = 0; - } - - RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF); - - // Set to 1R. - if (pAd->Antenna.field.RxPath > 1) - { - tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3); - } - - // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. - if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) - && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) - { - // Must using 40MHz. - AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel); - } - else - { - // Must using 20MHz. - AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel); - } - - if (Level != RTMP_HALT) - { - // Change Interrupt bitmask. - RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt); - } - else - { - NICDisableInterrupt(pAd); - } - - RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx); - // Disable MAC Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL , &MACValue); - MACValue &= 0xf7; - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL , MACValue); - - // 2. Send Sleep command - RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff); - RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff); - // send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power - AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x1); - // 2-1. Wait command success - // Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task. - brc = AsicCheckCommanOk(pAd, PowerSafeCID); - - if (brc == FALSE) - { - // try again - AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x01); // send POWER-SAVE command to MCU. Timeout unit:40us. - //RTMPusecDelay(200); - brc = AsicCheckCommanOk(pAd, PowerSafeCID); - } - - // 3. After 0x30 command is ok, send radio off command. lowbyte = 0 for power safe. - // If 0x30 command is not ok this time, we can ignore 0x35 command. It will make sure not cause firmware'r problem. - if ((Level == DOT11POWERSAVE) && (brc == TRUE)) - { - AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 0, 0x00); // lowbyte = 0 means to do power safe, NOT turn off radio. - // 3-1. Wait command success - AsicCheckCommanOk(pAd, PowerRadioOffCID); - } - else if (brc == TRUE) - { - AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 1, 0x00); // lowbyte = 0 means to do power safe, NOT turn off radio. - // 3-1. Wait command success - AsicCheckCommanOk(pAd, PowerRadioOffCID); - } - - // Wait DMA not busy - i = 0; - do - { - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - if ((DmaCfg.field.RxDMABusy == 0) && (DmaCfg.field.TxDMABusy == 0)) - break; - RTMPusecDelay(20); - i++; - }while(i < 50); - - if (i >= 50) - { - pAd->CheckDmaBusyCount++; - DBGPRINT(RT_DEBUG_TRACE, ("DMA Rx keeps busy. on RT28xxPciAsicRadioOff ()\n")); - } - else - { - pAd->CheckDmaBusyCount = 0; - } - - if (Level == DOT11POWERSAVE) - { - AUTO_WAKEUP_STRUC AutoWakeupCfg; - //RTMPSetTimer(&pAd->Mlme.PsPollTimer, 90); - - // we have decided to SLEEP, so at least do it for a BEACON period. - if (TbttNumToNextWakeUp == 0) - TbttNumToNextWakeUp = 1; - - AutoWakeupCfg.word = 0; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - - // 1. Set auto wake up timer. - AutoWakeupCfg.field.NumofSleepingTbtt = TbttNumToNextWakeUp - 1; - AutoWakeupCfg.field.EnableAutoWakeup = 1; - AutoWakeupCfg.field.AutoLeadTime = LEAD_TIME; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - } - - // 4-1. If it's to disable our device. Need to restore PCI Configuration Space to its original value. - if (Level == RTMP_HALT) - { - if ((brc == TRUE) && (i < 50)) - RTMPPCIeLinkCtrlSetting(pAd, 0); - } - // 4. Set PCI configuration Space Link Comtrol fields. Only Radio Off needs to call this function - else - { - if ((brc == TRUE) && (i < 50)) - RTMPPCIeLinkCtrlSetting(pAd, 3); - } - - RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX); -} - - -/* - ========================================================================== - Description: - This routine sends command to firmware and turn our chip to wake up mode from power save mode. - Both RadioOn and .11 power save function needs to call this routine. - Input: - Level = GUIRADIO_OFF : call this function is from Radio Off to Radio On. Need to restore PCI host value. - Level = other value : normal wake up function. - - ========================================================================== - */ -BOOLEAN RT28xxPciAsicRadioOn( - IN PRTMP_ADAPTER pAd, - IN UCHAR Level) -{ - WPDMA_GLO_CFG_STRUC DmaCfg; - BOOLEAN Cancelled, brv = TRUE; - UINT32 MACValue; - - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) - { - pAd->Mlme.bPsPollTimerRunning = FALSE; - RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); - if ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE) - || (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))) - { - DBGPRINT(RT_DEBUG_TRACE, ("RT28xxPciAsicRadioOn ()\n")); - // 1. Set PCI Link Control in Configuration Space. - RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP); - RTMPusecDelay(6000); - } - } - - pAd->bPCIclkOff = FALSE; - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x3a80); - // 2. Send wake up command. - AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02); - - // 2-1. wait command ok. - brv = AsicCheckCommanOk(pAd, PowerWakeCID); - if (brv) - { - NICEnableInterrupt(pAd); - - // 3. Enable Tx DMA. - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - DmaCfg.field.EnableTxDMA = 1; - DmaCfg.field.EnableRxDMA = 1; - RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word); - - // Eable MAC Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL , &MACValue); - MACValue |= 0x8; - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL , MACValue); - - RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF); - if (Level == GUI_IDLE_POWER_SAVE) - { - // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. - if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) - && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) - { - // Must using 40MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); - } - else - { - // Must using 20MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - } - } - return TRUE; - } - else - return FALSE; -} - -VOID RT28xxPciStaAsicForceWakeup( - IN PRTMP_ADAPTER pAd, - IN UCHAR Level) -{ - AUTO_WAKEUP_STRUC AutoWakeupCfg; - - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WAKEUP_NOW)) - { - DBGPRINT(RT_DEBUG_TRACE, ("waking up now!\n")); - return; - } - - OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WAKEUP_NOW); - RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); - - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) - { - // Support PCIe Advance Power Save - if (((Level == FROM_TX) && (pAd->Mlme.bPsPollTimerRunning == TRUE)) || - (Level == RTMP_HALT)) - { - pAd->Mlme.bPsPollTimerRunning = FALSE; - RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP); - RTMPusecDelay(5000); - DBGPRINT(RT_DEBUG_TRACE, ("=======AsicForceWakeup===bFromTx\n")); - } - - AutoWakeupCfg.word = 0; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - - // If this is called from Halt. ALWAYS force wakeup!!! - if (Level == RTMP_HALT) - { - RT28xxPciAsicRadioOn(pAd, RTMP_HALT); - } - else - { - if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE)) - { - // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. - if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) - && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) - { - // Must using 40MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); - } - else - { - // Must using 20MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - } - } - } - } - else - { - // PCI, 2860-PCIe - AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00); - AutoWakeupCfg.word = 0; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - } - - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WAKEUP_NOW); - DBGPRINT(RT_DEBUG_TRACE, ("<=======RT28xxPciStaAsicForceWakeup\n")); -} - -VOID RT28xxPciStaAsicSleepThenAutoWakeup( - IN PRTMP_ADAPTER pAd, - IN USHORT TbttNumToNextWakeUp) -{ - if (pAd->StaCfg.bRadio == FALSE) - { - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); - return; - } - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) - { - ULONG Now = 0; - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WAKEUP_NOW)) - { - DBGPRINT(RT_DEBUG_TRACE, ("waking up now!\n")); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); - return; - } - - NdisGetSystemUpTime(&Now); - // If last send NULL fram time is too close to this receiving beacon (within 8ms), don't go to sleep for this DTM. - // Because Some AP can't queuing outgoing frames immediately. - if (((pAd->Mlme.LastSendNULLpsmTime + 8) >= Now) && (pAd->Mlme.LastSendNULLpsmTime <= Now)) - { - DBGPRINT(RT_DEBUG_TRACE, ("Now = %lu, LastSendNULLpsmTime=%lu : RxCountSinceLastNULL = %lu. \n", Now, pAd->Mlme.LastSendNULLpsmTime, pAd->RalinkCounters.RxCountSinceLastNULL)); - return; - } - else if ((pAd->RalinkCounters.RxCountSinceLastNULL > 0) && ((pAd->Mlme.LastSendNULLpsmTime + pAd->CommonCfg.BeaconPeriod) >= Now)) - { - DBGPRINT(RT_DEBUG_TRACE, ("Now = %lu, LastSendNULLpsmTime=%lu: RxCountSinceLastNULL = %lu > 0 \n", Now, pAd->Mlme.LastSendNULLpsmTime, pAd->RalinkCounters.RxCountSinceLastNULL)); - return; - } - - RT28xxPciAsicRadioOff(pAd, DOT11POWERSAVE, TbttNumToNextWakeUp); - } - else - { - AUTO_WAKEUP_STRUC AutoWakeupCfg; - // we have decided to SLEEP, so at least do it for a BEACON period. - if (TbttNumToNextWakeUp == 0) - TbttNumToNextWakeUp = 1; - - AutoWakeupCfg.word = 0; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - AutoWakeupCfg.field.NumofSleepingTbtt = TbttNumToNextWakeUp - 1; - AutoWakeupCfg.field.EnableAutoWakeup = 1; - AutoWakeupCfg.field.AutoLeadTime = 5; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x00); // send POWER-SAVE command to MCU. Timeout 40us. - DBGPRINT(RT_DEBUG_TRACE, ("<-- %s, TbttNumToNextWakeUp=%d \n", __func__, TbttNumToNextWakeUp)); - } - OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE); -} - -VOID PsPollWakeExec( - IN PVOID SystemSpecific1, - IN PVOID FunctionContext, - IN PVOID SystemSpecific2, - IN PVOID SystemSpecific3) -{ - RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext; - unsigned long flags; - - DBGPRINT(RT_DEBUG_TRACE,("-->PsPollWakeExec \n")); - RTMP_INT_LOCK(&pAd->irq_lock, flags); - if (pAd->Mlme.bPsPollTimerRunning) - { - RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP); - } - pAd->Mlme.bPsPollTimerRunning = FALSE; - RTMP_INT_UNLOCK(&pAd->irq_lock, flags); -} - -VOID RadioOnExec( - IN PVOID SystemSpecific1, - IN PVOID FunctionContext, - IN PVOID SystemSpecific2, - IN PVOID SystemSpecific3) -{ - RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext; - WPDMA_GLO_CFG_STRUC DmaCfg; - BOOLEAN Cancelled; - - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - { - DBGPRINT(RT_DEBUG_TRACE,("-->RadioOnExec() return on fOP_STATUS_DOZE == TRUE; \n")); - RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10); - return; - } - - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) - { - DBGPRINT(RT_DEBUG_TRACE,("-->RadioOnExec() return on SCAN_IN_PROGRESS; \n")); - RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10); - return; - } - pAd->Mlme.bPsPollTimerRunning = FALSE; - RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); - if (pAd->StaCfg.bRadio == TRUE) - { - pAd->bPCIclkOff = FALSE; - RTMPRingCleanUp(pAd, QID_AC_BK); - RTMPRingCleanUp(pAd, QID_AC_BE); - RTMPRingCleanUp(pAd, QID_AC_VI); - RTMPRingCleanUp(pAd, QID_AC_VO); - RTMPRingCleanUp(pAd, QID_HCCA); - RTMPRingCleanUp(pAd, QID_MGMT); - RTMPRingCleanUp(pAd, QID_RX); - - // 2. Send wake up command. - AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02); - // 2-1. wait command ok. - AsicCheckCommanOk(pAd, PowerWakeCID); - - // When PCI clock is off, don't want to service interrupt. So when back to clock on, enable interrupt. - NICEnableInterrupt(pAd); - - // 3. Enable Tx DMA. - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - DmaCfg.field.EnableTxDMA = 1; - RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word); - - // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. - if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) - && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) - { - // Must using 40MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); - } - else - { - // Must using 20MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - } - - // Clear Radio off flag - RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); - - // Set LED - RTMPSetLED(pAd, LED_RADIO_ON); - - if (pAd->StaCfg.Psm == PWR_ACTIVE) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3); - } - } - else - { - RT28xxPciAsicRadioOff(pAd, GUIRADIO_OFF, 0); - } -} - -VOID RT28xxPciMlmeRadioOn( - IN PRTMP_ADAPTER pAd) -{ - if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) - return; - - DBGPRINT(RT_DEBUG_TRACE,("%s===>\n", __func__)); - - if ((pAd->OpMode == OPMODE_AP) || - ((pAd->OpMode == OPMODE_STA) && (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)))) - { - NICResetFromError(pAd); - - /* - RTMPRingCleanUp(pAd, QID_AC_BK); - RTMPRingCleanUp(pAd, QID_AC_BE); - RTMPRingCleanUp(pAd, QID_AC_VI); - RTMPRingCleanUp(pAd, QID_AC_VO); - RTMPRingCleanUp(pAd, QID_HCCA); - RTMPRingCleanUp(pAd, QID_MGMT); - RTMPRingCleanUp(pAd, QID_RX); - */ - - // Enable Tx/Rx - RTMPEnableRxTx(pAd); - - // Clear Radio off flag - RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); - - // Set LED - RTMPSetLED(pAd, LED_RADIO_ON); - } - - if ((pAd->OpMode == OPMODE_STA) && - (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))) - { - BOOLEAN Cancelled; - - RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP); - - pAd->Mlme.bPsPollTimerRunning = FALSE; - RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); - RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); - RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10); - } -} - -VOID RT28xxPciMlmeRadioOFF( - IN PRTMP_ADAPTER pAd) -{ - WPDMA_GLO_CFG_STRUC GloCfg; - UINT32 i; - - if (pAd->StaCfg.bRadio == TRUE) - { - DBGPRINT(RT_DEBUG_TRACE,("-->MlmeRadioOff() return on bRadio == TRUE; \n")); - return; - } - - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) - return; - - DBGPRINT(RT_DEBUG_TRACE,("%s===>\n", __func__)); - - // Set LED - RTMPSetLED(pAd, LED_RADIO_OFF); - - { - BOOLEAN Cancelled; - - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) - { - RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); - RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); - } - - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) - { - BOOLEAN Cancelled; - - // Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF). - if ((pAd->OpMode == OPMODE_STA) && - (IDLE_ON(pAd)) && - (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))) - { - RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE); - } - - pAd->Mlme.bPsPollTimerRunning = FALSE; - RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); - RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); - } - - // Link down first if any association exists - if (INFRA_ON(pAd) || ADHOC_ON(pAd)) - LinkDown(pAd, FALSE); - RTMPusecDelay(10000); - //========================================== - // Clean up old bss table - BssTableInit(&pAd->ScanTab); - - RTMPRingCleanUp(pAd, QID_AC_BK); - RTMPRingCleanUp(pAd, QID_AC_BE); - RTMPRingCleanUp(pAd, QID_AC_VI); - RTMPRingCleanUp(pAd, QID_AC_VO); - RTMPRingCleanUp(pAd, QID_HCCA); - RTMPRingCleanUp(pAd, QID_MGMT); - RTMPRingCleanUp(pAd, QID_RX); - - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) - { - RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 500); - return; - } - } - - // Set Radio off flag - RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); - - // Disable Tx/Rx DMA - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word); // disable DMA - GloCfg.field.EnableTxDMA = 0; - GloCfg.field.EnableRxDMA = 0; - RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word); // abort all TX rings - - - // MAC_SYS_CTRL => value = 0x0 => 40mA - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0); - - // PWR_PIN_CFG => value = 0x0 => 40mA - RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0); - - // TX_PIN_CFG => value = 0x0 => 20mA - RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0); - - if (pAd->CommonCfg.BBPCurrentBW == BW_40) - { - // Must using 40MHz. - AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel); - } - else - { - // Must using 20MHz. - AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel); - } - - // Waiting for DMA idle - i = 0; - do - { - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word); - if ((GloCfg.field.TxDMABusy == 0) && (GloCfg.field.RxDMABusy == 0)) - break; - - RTMPusecDelay(1000); - }while (i++ < 100); -} -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/