Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755318AbZKKM2V (ORCPT ); Wed, 11 Nov 2009 07:28:21 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751673AbZKKM2L (ORCPT ); Wed, 11 Nov 2009 07:28:11 -0500 Received: from mail.free-electrons.com ([88.191.76.200]:48964 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751142AbZKKM2E (ORCPT ); Wed, 11 Nov 2009 07:28:04 -0500 From: Albin Tonnerre To: akpm@linux-foundation.org Cc: hpa@zytor.com, rmk@arm.linux.org.uk, linux-kernel@vger.kernel.org, Albin Tonnerre Subject: [PATCH v3 1/4] Add support for LZO-compressed kernels Date: Wed, 11 Nov 2009 13:27:55 +0100 Message-Id: <1257942478-18719-2-git-send-email-albin.tonnerre@free-electrons.com> X-Mailer: git-send-email 1.6.3.3 In-Reply-To: <1257942478-18719-1-git-send-email-albin.tonnerre@free-electrons.com> References: <1257942478-18719-1-git-send-email-albin.tonnerre@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9822 Lines: 361 This is the first part of the lzo patch The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This version applies to kernel 2.6.31-rc3 This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression Signed-off-by: Albin Tonnerre --- include/linux/decompress/unlzo.h | 10 ++ init/Kconfig | 18 +++- lib/decompress_unlzo.c | 208 ++++++++++++++++++++++++++++++++++++++ lib/lzo/lzo1x_decompress.c | 9 +- scripts/Makefile.lib | 5 + 5 files changed, 243 insertions(+), 7 deletions(-) create mode 100644 include/linux/decompress/unlzo.h create mode 100644 lib/decompress_unlzo.c diff --git a/include/linux/decompress/unlzo.h b/include/linux/decompress/unlzo.h new file mode 100644 index 0000000..9872297 --- /dev/null +++ b/include/linux/decompress/unlzo.h @@ -0,0 +1,10 @@ +#ifndef DECOMPRESS_UNLZO_H +#define DECOMPRESS_UNLZO_H + +int unlzo(unsigned char *inbuf, int len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *output, + int *pos, + void(*error)(char *x)); +#endif diff --git a/init/Kconfig b/init/Kconfig index f515864..eb65318 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -115,10 +115,13 @@ config HAVE_KERNEL_BZIP2 config HAVE_KERNEL_LZMA bool +config HAVE_KERNEL_LZO + bool + choice prompt "Kernel compression mode" default KERNEL_GZIP - depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA + depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO help The linux kernel is a kind of self-extracting executable. Several compression algorithms are available, which differ @@ -141,9 +144,8 @@ config KERNEL_GZIP bool "Gzip" depends on HAVE_KERNEL_GZIP help - The old and tried gzip compression. Its compression ratio is - the poorest among the 3 choices; however its speed (both - compression and decompression) is the fastest. + The old and tried gzip compression. It provides a good balance + between compression ratio and decompression speed. config KERNEL_BZIP2 bool "Bzip2" @@ -164,6 +166,14 @@ config KERNEL_LZMA two. Compression is slowest. The kernel size is about 33% smaller with LZMA in comparison to gzip. +config KERNEL_LZO + bool "LZO" + depends on HAVE_KERNEL_LZO + help + Its compression ratio is the poorest among the 4. The kernel + size is about about 10% bigger than gzip; however its speed + (both compression and decompression) is the fastest. + endchoice config SWAP diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c new file mode 100644 index 0000000..2bb736f --- /dev/null +++ b/lib/decompress_unlzo.c @@ -0,0 +1,208 @@ +/* + * LZO decompressor for the Linux kernel. Code borrowed from the lzo + * implementation by Markus Franz Xaver Johannes Oberhumer. + * + * Linux kernel adaptation: + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons + * + * Original code: + * Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer + * All Rights Reserved. + * + * lzop and the LZO library are free software; you can redistribute them + * and/or modify them under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Markus F.X.J. Oberhumer + * + * http://www.oberhumer.com/opensource/lzop/ + */ + +#ifdef STATIC +#include "lzo/lzo1x_decompress.c" +#else +#include +#include +#endif + +#include +#include +#include + +#include +#include + +static const unsigned char lzop_magic[] = + { 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a }; + +#define LZO_BLOCK_SIZE (256*1024l) +#define HEADER_HAS_FILTER 0x00000800L + +STATIC inline int INIT parse_header(u8 *input, u8 *skip) +{ + int l; + u8 *parse = input; + u8 level = 0; + u16 version; + + /* read magic: 9 first bits */ + for (l = 0; l < 9; l++) { + if (*parse++ != lzop_magic[l]) + return 0; + } + /* get version (2bytes), skip library version (2), + * 'need to be extracted' version (2) and + * method (1) */ + version = get_unaligned_be16(parse); + parse += 7; + if (version >= 0x0940) + level = *parse++; + if (get_unaligned_be32(parse) & HEADER_HAS_FILTER) + parse += 8; /* flags + filter info */ + else + parse += 4; /* flags */ + + /* skip mode and mtime_low */ + parse += 8; + if (version >= 0x0940) + parse += 4; /* skip mtime_high */ + + l = *parse++; + /* don't care about the file name, and skip checksum */ + parse += l + 4; + + *skip = parse - input; + return 1; +} + +STATIC inline int INIT unlzo(u8 *input, int in_len, + int (*fill) (void *, unsigned int), + int (*flush) (void *, unsigned int), + u8 *output, int *posp, + void (*error_fn) (char *x)) +{ + u8 skip = 0, r = 0; + u32 src_len, dst_len; + size_t tmp; + u8 *in_buf, *in_buf_save, *out_buf; + int obytes_processed = 0; + + set_error_fn(error_fn); + + if (output) + out_buf = output; + else if (!flush) { + error("NULL output pointer and no flush function provided"); + goto exit; + } else { + out_buf = malloc(LZO_BLOCK_SIZE); + if (!out_buf) { + error("Could not allocate output buffer"); + goto exit; + } + } + + if (input && fill) { + error("Both input pointer and fill function provided, don't know what to do"); + goto exit_1; + } else if (input) + in_buf = input; + else if (!fill || !posp) { + error("NULL input pointer and missing position pointer or fill function"); + goto exit_1; + } else { + in_buf = malloc(lzo1x_worst_compress(LZO_BLOCK_SIZE)); + if (!in_buf) { + error("Could not allocate input buffer"); + goto exit_1; + } + } + in_buf_save = in_buf; + + if (posp) + *posp = 0; + + if (fill) + fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE)); + + if (!parse_header(input, &skip)) { + error("invalid header"); + goto exit_2; + } + in_buf += skip; + + if (posp) + *posp = skip; + + for (;;) { + /* read uncompressed block size */ + dst_len = get_unaligned_be32(in_buf); + in_buf += 4; + + /* exit if last block */ + if (dst_len == 0) { + if (posp) + *posp += 4; + break; + } + + if (dst_len > LZO_BLOCK_SIZE) { + error("dest len longer than block size"); + goto exit_2; + } + + /* read compressed block size, and skip block checksum info */ + src_len = get_unaligned_be32(in_buf); + in_buf += 8; + + if (src_len <= 0 || src_len > dst_len) { + error("file corrupted"); + goto exit_2; + } + + /* decompress */ + tmp = dst_len; + r = lzo1x_decompress_safe((u8 *) in_buf, src_len, out_buf, &tmp); + + if (r != LZO_E_OK || dst_len != tmp) { + error("Compressed data violation"); + goto exit_2; + } + + obytes_processed += dst_len; + if (flush) + flush(out_buf, dst_len); + if (output) + out_buf += dst_len; + if (posp) + *posp += src_len + 12; + if (fill) { + in_buf = in_buf_save; + fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE)); + } else + in_buf += src_len; + } + +exit_2: + if (!input) + free(in_buf); +exit_1: + if (!output) + free(out_buf); +exit: + return obytes_processed; +} + +#define decompress unlzo diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c index 5dc6b29..f2fd098 100644 --- a/lib/lzo/lzo1x_decompress.c +++ b/lib/lzo/lzo1x_decompress.c @@ -11,11 +11,13 @@ * Richard Purdie */ +#ifndef STATIC #include #include -#include -#include +#endif + #include +#include #include "lzodefs.h" #define HAVE_IP(x, ip_end, ip) ((size_t)(ip_end - ip) < (x)) @@ -244,9 +246,10 @@ lookbehind_overrun: *out_len = op - out; return LZO_E_LOOKBEHIND_OVERRUN; } - +#ifndef STATIC EXPORT_SYMBOL_GPL(lzo1x_decompress_safe); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("LZO1X Decompressor"); +#endif diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index ffdafb2..39c3483 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -230,3 +230,8 @@ quiet_cmd_lzma = LZMA $@ cmd_lzma = (cat $(filter-out FORCE,$^) | \ lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ (rm -f $@ ; false) + +quiet_cmd_lzo = LZO $@ +cmd_lzo = (cat $(filter-out FORCE,$^) | \ + lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ + (rm -f $@ ; false) -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/