Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755683AbZKLX4q (ORCPT ); Thu, 12 Nov 2009 18:56:46 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755456AbZKLX4m (ORCPT ); Thu, 12 Nov 2009 18:56:42 -0500 Received: from lucidpixels.com ([75.144.35.66]:40531 "EHLO lucidpixels.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755618AbZKLX4h (ORCPT ); Thu, 12 Nov 2009 18:56:37 -0500 Date: Thu, 12 Nov 2009 18:56:41 -0500 (EST) From: Justin Piszcz To: Thomas Gleixner cc: john stultz , lkml , Venkatesch Pallipadi , Arjan van de Ven Subject: Re: 2.6.31.4: WARNING: at arch/x86/kernel/hpet.c:390 hpet_next_event+0x70/0x80() [occurs when ACPI_PROCESSOR=y] In-Reply-To: Message-ID: References: <20091111195016.GB22225@redhat.com> <1f1b08da0911121513l32d47b4x8b9722ad3440ceb6@mail.gmail.com> <1258069232.14894.9.camel@localhost.localdomain> User-Agent: Alpine 2.00 (DEB 1167 2008-08-23) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 55499 Lines: 885 On Fri, 13 Nov 2009, Thomas Gleixner wrote: > On Thu, 12 Nov 2009, john stultz wrote: > >> Forgot to CC lkml, re-adding. > > Added more CCs > >> On Thu, 2009-11-12 at 18:25 -0500, Justin Piszcz wrote: >>> On Thu, 12 Nov 2009, john stultz wrote: >>>> On Thu, Nov 12, 2009 at 8:33 AM, Justin Piszcz wrote: >>>>> On Thu, 12 Nov 2009, Justin Piszcz wrote: >>>>>> On Wed, 11 Nov 2009, Justin Piszcz wrote: >>>>>> Again, the problem: >>>>>> [ 3.318770] cpuidle: using governor ladder >>>>>> [ 3.321556] ------------[ cut here ]------------ >>>>>> [ 3.321560] WARNING: at arch/x86/kernel/hpet.c:390 >>>>>> hpet_next_event+0x70/0x80() >>>>>> [ 3.321561] Hardware name: >>>>>> [ 3.321562] Modules linked in: >>>>>> [ 3.321564] Pid: 0, comm: swapper Not tainted 2.6.31.5 #17 >>>>>> [ 3.321565] Call Trace: >>>>>> [ 3.321567] [] ? hpet_next_event+0x70/0x80 >>>>>> [ 3.321568] [] ? hpet_next_event+0x70/0x80 >>>>>> [ 3.321571] [] ? warn_slowpath_common+0x74/0xd0 >>>>>> [ 3.321573] [] ? hpet_next_event+0x70/0x80 >>>>>> [ 3.321576] [] ? tick_dev_program_event+0x36/0xb0 >>>>>> [ 3.321578] [] ? >>>>>> tick_broadcast_oneshot_control+0x119/0x120 >>>>>> [ 3.321579] [] ? tick_notify+0x22d/0x420 >>>>>> [ 3.321581] [] ? notifier_call_chain+0x37/0x70 >>>>>> [ 3.321583] [] ? clockevents_notify+0x2b/0x90 >>>>>> [ 3.321586] [] ? acpi_idle_enter_bm+0x15f/0x2d3 >>>>>> [ 3.321587] [] ? acpi_idle_enter_c1+0xf1/0xfc >>>>>> [ 3.321590] [] ? cpuidle_idle_call+0xba/0x120 >>>>>> [ 3.321593] [] ? cpu_idle+0x62/0xc0 >>>>>> [ 3.321596] ---[ end trace cac202f11005305c ]--- >>>>>> [ 3.553852] cpuidle: using governor menu >>>>> >>>>> Other user with this problem: >>>>> http://lkml.org/lkml/2009/10/2/330 - Nobody responded to his report. >>>>> >>>>> This has been also been reported on other forums with no fix / conclusion on >>>>> any type of fix or work-around. >>>> >>>> Looks like your hpet is busted, or maybe something is resetting the >>>> hpet at exactly the wrong time. >>>> >>>> What does booting with the attached patch do? >>> >>> Unfortunately I cannot login fast enough to get a full dmesg: >> >> So if you comment out the printk I added, does it boot? >> >>> It continually scrolls with this: >>> >>> [ 11.463500] hpet_next_event: hpet_writel failed: 0x9c90955 != 0xa0e8b7b >>> [ 11.463972] hpet_next_event: hpet_writel failed: 0xa0e8b7b != 0x9cb9398 >>> [ 11.475121] hpet_next_event: hpet_writel failed: 0x9cb9398 != 0xa0e8b71 >>> [ 11.475144] hpet_next_event: hpet_writel failed: 0xa0e8b71 != 0x9ce0459 >>> [ 11.486274] hpet_next_event: hpet_writel failed: 0x9ce0459 != 0xa0e8b61 >>> [ 11.486343] hpet_next_event: hpet_writel failed: 0xa0e8b61 != 0x9d076c0 >>> [ 11.497492] hpet_next_event: hpet_writel failed: 0x9d076c0 != 0xa0e8b4c >>> [ 11.497962] hpet_next_event: hpet_writel failed: 0xa0e8b4c != 0x9d30119 >>> [ 11.509111] hpet_next_event: hpet_writel failed: 0x9d30119 != 0xa0e8b3c >>> [ 11.509134] hpet_next_event: hpet_writel failed: 0xa0e8b3c != 0x9d571a9 >>> [ 11.520275] hpet_next_event: hpet_writel failed: 0x9d571a9 != 0xa0e8b2f >>> [ 11.520293] hpet_next_event: hpet_writel failed: 0xa0e8b2f != 0x9d7e24d >>> [ 11.531443] hpet_next_event: hpet_writel failed: 0x9d7e24d != 0xa0e8b1d >>> [ 11.531947] hpet_next_event: hpet_writel failed: 0xa0e8b1d != 0x9da6e46 >>> [ 11.543095] hpet_next_event: hpet_writel failed: 0x9da6e46 != 0xa0e8b0c >> >> Huh. That's sort of crazy. It almost seems as though you have two offset >> HPET timers at one timer location that are switching back and forth. >> Looks like either very busted hardware, or something new the kernel >> doesn't expect. >> >>> When I do not load processor.ko though, the error does not occur? > > Please boot w/o loading that module and post your full bootlog. > > Thanks, > > tglx > Hi, Booting without loading the module or having it compiled in (the result is the same either way), the full boot log is below: Link: http://home.comcast.net/~jpiszcz/2009112/dmesg-full-boot-log-without-processor-module.txt The log itself: [ 0.000000] Linux version 2.6.31.5 (root@p34) (gcc version 4.3.4 (Debian 4.3.4-5) ) #24 SMP Thu Nov 12 18:35:10 EST 2009 [ 0.000000] Command line: BOOT_IMAGE=2.6.31.5-24 ro root=812 3w-9xxx.use_msi=1 reboot=a snd_hda_intel.enable_msi=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf671000 (usable) [ 0.000000] BIOS-e820: 00000000cf671000 - 00000000cf6bf000 (reserved) [ 0.000000] BIOS-e820: 00000000cf6bf000 - 00000000cf6ee000 (usable) [ 0.000000] BIOS-e820: 00000000cf6ee000 - 00000000cf7bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf7bf000 - 00000000cf7e4000 (usable) [ 0.000000] BIOS-e820: 00000000cf7e4000 - 00000000cf7f1000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf7f1000 - 00000000cf7f2000 (usable) [ 0.000000] BIOS-e820: 00000000cf7f2000 - 00000000cf7ff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable) [ 0.000000] BIOS-e820: 00000000cf800000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask F00000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf800000 [ 0.000000] 0000000000 - 00cf800000 page 2M [ 0.000000] kernel direct mapping tables up to cf800000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ b000-15000 [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 00000000cf7fd120 0006C (v01 INTEL KBIBX10J 00000F26 01000013) [ 0.000000] ACPI: FACP 00000000cf7fc000 000F4 (v03 INTEL KBIBX10J 00000F26 MSFT 0100000D) [ 0.000000] ACPI: DSDT 00000000cf7f8000 03D03 (v02 INTEL KBIBX10J 00000F26 MSFT 0100000D) [ 0.000000] ACPI: FACS 00000000cf76c000 00040 [ 0.000000] ACPI: APIC 00000000cf7f7000 000BC (v02 INTEL KBIBX10J 00000F26 MSFT 0100000D) [ 0.000000] ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL KBIBX10J 00000F26 MSFT 0100000D) [ 0.000000] ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL KBIBX10J 00000F26 MSFT 0100000D) [ 0.000000] ACPI: ASF! 00000000cf7f4000 000A5 (v32 INTEL KBIBX10J 00000F26 MSFT 0100000D) [ 0.000000] ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL KBIBX10J 00000F26 MSFT 0100000D) [ 0.000000] ACPI: WDTx 00000000cf7f0000 00224 (v02 INTEL KBIBX10J 00000F26 MSFT 0100000D) [ 0.000000] ACPI: SSDT 00000000cf7e5000 0A0FC (v01 INTEL SSDT PM 00000F26 MSFT 0100000D) [ 0.000000] ACPI: ASPT 00000000cf7f2000 00034 (v05 INTEL PerfTune 00000F26 MSFT 0100000D) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0230000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00016040ac] TEXT DATA BSS ==> [0001000000 - 00016040ac] [ 0.000000] #3 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #4 [0001605000 - 000160515e] BRK ==> [0001605000 - 000160515e] [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #6 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000] [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000008f [ 0.000000] 0: 0x00000100 -> 0x000cf671 [ 0.000000] 0: 0x000cf6bf -> 0x000cf6ee [ 0.000000] 0: 0x000cf7bf -> 0x000cf7e4 [ 0.000000] 0: 0x000cf7f1 -> 0x000cf7f2 [ 0.000000] 0: 0x000cf7ff -> 0x000cf800 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2094678 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 108 pages reserved [ 0.000000] DMA zone: 3819 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 831231 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67744 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063210 [ 0.000000] Kernel command line: BOOT_IMAGE=2.6.31.5-24 ro root=812 3w-9xxx.use_msi=1 reboot=a snd_hda_intel.enable_msi=1 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 8175616k/9175040k available (3874k kernel code, 796328k absent, 202212k reserved, 1524k data, 372k init) [ 0.000000] NR_IRQS:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2933.315 MHz processor. [ 0.000028] Console: colour dummy device 80x25 [ 0.000029] console [tty0] enabled [ 0.000232] hpet clockevent registered [ 0.000246] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.000254] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.63 BogoMIPS (lpj=2933315) [ 0.000285] Mount-cache hash table entries: 256 [ 0.000344] CPU: Physical Processor ID: 0 [ 0.000346] CPU: Processor Core ID: 0 [ 0.000349] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000351] CPU: L2 cache: 256K [ 0.000352] CPU: L3 cache: 8192K [ 0.000355] mce: CPU supports 9 MCE banks [ 0.000362] CPU0: Thermal monitoring enabled (TM1) [ 0.000365] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.000371] using mwait in idle threads. [ 0.000378] Freeing SMP alternatives: 30k freed [ 0.000386] ACPI: Core revision 20090521 [ 0.012830] Setting APIC routing to flat [ 0.013204] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023204] CPU0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05 [ 0.124270] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.134856] Initializing CPU#1 [ 0.195187] Calibrating delay using timer specific routine.. 5865.74 BogoMIPS (lpj=2932872) [ 0.195192] CPU: Physical Processor ID: 0 [ 0.195193] CPU: Processor Core ID: 0 [ 0.195195] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.195196] CPU: L2 cache: 256K [ 0.195197] CPU: L3 cache: 8192K [ 0.195199] mce: CPU supports 9 MCE banks [ 0.195206] CPU1: Thermal monitoring enabled (TM1) [ 0.195208] CPU 1 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.195804] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.196391] CPU1: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05 [ 0.196414] Skipping synchronization checks as TSC is reliable. [ 0.196470] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.206700] Initializing CPU#2 [ 0.267156] Calibrating delay using timer specific routine.. 5865.76 BogoMIPS (lpj=2932882) [ 0.267161] CPU: Physical Processor ID: 0 [ 0.267162] CPU: Processor Core ID: 1 [ 0.267163] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.267164] CPU: L2 cache: 256K [ 0.267165] CPU: L3 cache: 8192K [ 0.267166] mce: CPU supports 9 MCE banks [ 0.267173] CPU2: Thermal monitoring enabled (TM1) [ 0.267175] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.267673] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.268181] CPU2: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05 [ 0.268202] Skipping synchronization checks as TSC is reliable. [ 0.268254] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.278588] Initializing CPU#3 [ 0.339126] Calibrating delay using timer specific routine.. 5865.76 BogoMIPS (lpj=2932884) [ 0.339130] CPU: Physical Processor ID: 0 [ 0.339131] CPU: Processor Core ID: 1 [ 0.339133] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.339133] CPU: L2 cache: 256K [ 0.339134] CPU: L3 cache: 8192K [ 0.339136] mce: CPU supports 9 MCE banks [ 0.339143] CPU3: Thermal monitoring enabled (TM1) [ 0.339144] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.339778] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.340469] CPU3: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05 [ 0.340490] Skipping synchronization checks as TSC is reliable. [ 0.340541] Booting processor 4 APIC 0x4 ip 0x6000 [ 0.350875] Initializing CPU#4 [ 0.411096] Calibrating delay using timer specific routine.. 5865.76 BogoMIPS (lpj=2932884) [ 0.411100] CPU: Physical Processor ID: 0 [ 0.411101] CPU: Processor Core ID: 2 [ 0.411103] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.411104] CPU: L2 cache: 256K [ 0.411104] CPU: L3 cache: 8192K [ 0.411106] mce: CPU supports 9 MCE banks [ 0.411113] CPU4: Thermal monitoring enabled (TM1) [ 0.411115] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.411614] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.412056] CPU4: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05 [ 0.412076] Skipping synchronization checks as TSC is reliable. [ 0.412131] Booting processor 5 APIC 0x5 ip 0x6000 [ 0.422464] Initializing CPU#5 [ 0.483066] Calibrating delay using timer specific routine.. 5865.76 BogoMIPS (lpj=2932882) [ 0.483070] CPU: Physical Processor ID: 0 [ 0.483071] CPU: Processor Core ID: 2 [ 0.483072] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.483073] CPU: L2 cache: 256K [ 0.483073] CPU: L3 cache: 8192K [ 0.483075] mce: CPU supports 9 MCE banks [ 0.483082] CPU5: Thermal monitoring enabled (TM1) [ 0.483084] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.483721] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.484445] CPU5: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05 [ 0.484466] Skipping synchronization checks as TSC is reliable. [ 0.484518] Booting processor 6 APIC 0x6 ip 0x6000 [ 0.494852] Initializing CPU#6 [ 0.555035] Calibrating delay using timer specific routine.. 5865.77 BogoMIPS (lpj=2932885) [ 0.555040] CPU: Physical Processor ID: 0 [ 0.555041] CPU: Processor Core ID: 3 [ 0.555042] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.555043] CPU: L2 cache: 256K [ 0.555044] CPU: L3 cache: 8192K [ 0.555045] mce: CPU supports 9 MCE banks [ 0.555052] CPU6: Thermal monitoring enabled (TM1) [ 0.555054] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.555553] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.556032] CPU6: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05 [ 0.556055] Skipping synchronization checks as TSC is reliable. [ 0.556107] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.566440] Initializing CPU#7 [ 0.627005] Calibrating delay using timer specific routine.. 5865.76 BogoMIPS (lpj=2932884) [ 0.627009] CPU: Physical Processor ID: 0 [ 0.627010] CPU: Processor Core ID: 3 [ 0.627011] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.627012] CPU: L2 cache: 256K [ 0.627013] CPU: L3 cache: 8192K [ 0.627015] mce: CPU supports 9 MCE banks [ 0.627022] CPU7: Thermal monitoring enabled (TM1) [ 0.627023] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.627659] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.628322] CPU7: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz stepping 05 [ 0.628342] Skipping synchronization checks as TSC is reliable. [ 0.628352] Brought up 8 CPUs [ 0.628354] Total of 8 processors activated (46926.97 BogoMIPS). [ 0.628695] NET: Registered protocol family 16 [ 0.628829] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.628832] ACPI: bus type pci registered [ 0.628901] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.628904] PCI: MCFG area at f8000000 reserved in E820 [ 0.630093] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.630095] PCI: Using configuration type 1 for base access [ 0.631717] bio: create slab at 0 [ 0.632214] ACPI: EC: Look up EC in DSDT [ 0.638739] ACPI: Interpreter enabled [ 0.638741] ACPI: (supports S0 S5) [ 0.638748] ACPI: Using IOAPIC for interrupt routing [ 0.641651] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.641752] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.641756] pci 0000:00:03.0: PME# disabled [ 0.641796] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.641799] pci 0000:00:05.0: PME# disabled [ 0.642042] pci 0000:00:19.0: reg 10 32bit mmio: [0xe6600000-0xe661ffff] [ 0.642051] pci 0000:00:19.0: reg 14 32bit mmio: [0xe6624000-0xe6624fff] [ 0.642059] pci 0000:00:19.0: reg 18 io port: [0x7040-0x705f] [ 0.642096] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.642104] pci 0000:00:19.0: PME# disabled [ 0.642158] pci 0000:00:1a.0: reg 10 32bit mmio: [0xe6625c00-0xe6625fff] [ 0.642208] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.642216] pci 0000:00:1a.0: PME# disabled [ 0.642258] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe6620000-0xe6623fff] [ 0.642296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.642304] pci 0000:00:1b.0: PME# disabled [ 0.642359] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.642367] pci 0000:00:1c.0: PME# disabled [ 0.642425] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.642433] pci 0000:00:1c.4: PME# disabled [ 0.642490] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.642498] pci 0000:00:1c.6: PME# disabled [ 0.642554] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.642562] pci 0000:00:1c.7: PME# disabled [ 0.642617] pci 0000:00:1d.0: reg 10 32bit mmio: [0xe6625800-0xe6625bff] [ 0.642667] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.642675] pci 0000:00:1d.0: PME# disabled [ 0.642844] pci 0000:00:1f.2: reg 10 io port: [0x7068-0x706f] [ 0.642853] pci 0000:00:1f.2: reg 14 io port: [0x7074-0x7077] [ 0.642861] pci 0000:00:1f.2: reg 18 io port: [0x7060-0x7067] [ 0.642870] pci 0000:00:1f.2: reg 1c io port: [0x7070-0x7073] [ 0.642878] pci 0000:00:1f.2: reg 20 io port: [0x7020-0x703f] [ 0.642886] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe6625000-0xe66257ff] [ 0.642916] pci 0000:00:1f.2: PME# supported from D3hot [ 0.642924] pci 0000:00:1f.2: PME# disabled [ 0.642958] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe6626000-0xe66260ff] [ 0.642972] pci 0000:00:1f.3: reg 20 io port: [0x7000-0x701f] [ 0.643014] pci 0000:01:00.0: reg 10 32bit mmio: [0xe5000000-0xe5ffffff] [ 0.643020] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.643027] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe4000000-0xe4ffffff] [ 0.643033] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.643069] pci 0000:00:03.0: bridge 32bit mmio: [0xe4000000-0xe5ffffff] [ 0.643073] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.643098] pci 0000:02:00.0: reg 10 64bit mmio: [0xe0000000-0xe1ffffff] [ 0.643105] pci 0000:02:00.0: reg 18 64bit mmio: [0xe6500000-0xe6500fff] [ 0.643109] pci 0000:02:00.0: reg 20 io port: [0x6000-0x60ff] [ 0.643116] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.643132] pci 0000:02:00.0: supports D1 D2 [ 0.643152] pci 0000:00:05.0: bridge io port: [0x6000-0x6fff] [ 0.643154] pci 0000:00:05.0: bridge 32bit mmio: [0xe6500000-0xe65fffff] [ 0.643158] pci 0000:00:05.0: bridge 64bit mmio pref: [0xe0000000-0xe1ffffff] [ 0.643206] pci 0000:03:00.0: reg 10 64bit mmio: [0xe2000000-0xe3ffffff] [ 0.643220] pci 0000:03:00.0: reg 18 64bit mmio: [0xe6400000-0xe6400fff] [ 0.643230] pci 0000:03:00.0: reg 20 io port: [0x5000-0x50ff] [ 0.643244] pci 0000:03:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.643272] pci 0000:03:00.0: supports D1 D2 [ 0.643312] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff] [ 0.643319] pci 0000:00:1c.0: bridge 32bit mmio: [0xe6400000-0xe64fffff] [ 0.643323] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xe2000000-0xe3ffffff] [ 0.643488] pci 0000:04:00.0: reg 10 32bit mmio: [0xe6380000-0xe639ffff] [ 0.643513] pci 0000:04:00.0: reg 14 32bit mmio: [0xe6300000-0xe637ffff] [ 0.643539] pci 0000:04:00.0: reg 18 io port: [0x4000-0x401f] [ 0.643564] pci 0000:04:00.0: reg 1c 32bit mmio: [0xe63a0000-0xe63a3fff] [ 0.643636] pci 0000:04:00.0: reg 30 32bit mmio: [0xfffc0000-0xffffffff] [ 0.643779] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.643793] pci 0000:04:00.0: PME# disabled [ 0.643886] pci 0000:00:1c.4: bridge io port: [0x4000-0x4fff] [ 0.643893] pci 0000:00:1c.4: bridge 32bit mmio: [0xe6300000-0xe63fffff] [ 0.644055] pci 0000:05:00.0: reg 10 32bit mmio: [0xe6280000-0xe629ffff] [ 0.644076] pci 0000:05:00.0: reg 14 32bit mmio: [0xe6200000-0xe627ffff] [ 0.644101] pci 0000:05:00.0: reg 18 io port: [0x3000-0x301f] [ 0.644127] pci 0000:05:00.0: reg 1c 32bit mmio: [0xe62a0000-0xe62a3fff] [ 0.644199] pci 0000:05:00.0: reg 30 32bit mmio: [0xfffc0000-0xffffffff] [ 0.644342] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.644355] pci 0000:05:00.0: PME# disabled [ 0.644453] pci 0000:00:1c.6: bridge io port: [0x3000-0x3fff] [ 0.644460] pci 0000:00:1c.6: bridge 32bit mmio: [0xe6200000-0xe62fffff] [ 0.644518] pci 0000:06:00.0: reg 10 io port: [0x2018-0x201f] [ 0.644528] pci 0000:06:00.0: reg 14 io port: [0x2024-0x2027] [ 0.644535] pci 0000:06:00.0: reg 18 io port: [0x2010-0x2017] [ 0.644545] pci 0000:06:00.0: reg 1c io port: [0x2020-0x2023] [ 0.644551] pci 0000:06:00.0: reg 20 io port: [0x2000-0x200f] [ 0.644562] pci 0000:06:00.0: reg 24 32bit mmio: [0xe6100000-0xe61003ff] [ 0.644572] pci 0000:06:00.0: reg 30 32bit mmio: [0xfffc0000-0xffffffff] [ 0.644606] pci 0000:06:00.0: supports D1 [ 0.644607] pci 0000:06:00.0: PME# supported from D0 D1 D3hot [ 0.644616] pci 0000:06:00.0: PME# disabled [ 0.644659] pci 0000:00:1c.7: bridge io port: [0x2000-0x2fff] [ 0.644666] pci 0000:00:1c.7: bridge 32bit mmio: [0xe6100000-0xe61fffff] [ 0.644721] pci 0000:07:01.0: reg 20 io port: [0x1020-0x103f] [ 0.644749] pci 0000:07:01.0: supports D1 D2 [ 0.644750] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.644758] pci 0000:07:01.0: PME# disabled [ 0.644810] pci 0000:07:01.1: reg 20 io port: [0x1000-0x101f] [ 0.644837] pci 0000:07:01.1: supports D1 D2 [ 0.644838] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.644847] pci 0000:07:01.1: PME# disabled [ 0.644879] pci 0000:07:01.2: reg 10 32bit mmio: [0xe6004800-0xe60048ff] [ 0.644923] pci 0000:07:01.2: supports D1 D2 [ 0.644924] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.644932] pci 0000:07:01.2: PME# disabled [ 0.644976] pci 0000:07:03.0: reg 10 32bit mmio: [0xe6004000-0xe60047ff] [ 0.644985] pci 0000:07:03.0: reg 14 32bit mmio: [0xe6000000-0xe6003fff] [ 0.645032] pci 0000:07:03.0: supports D1 D2 [ 0.645033] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot [ 0.645041] pci 0000:07:03.0: PME# disabled [ 0.645081] pci 0000:00:1e.0: transparent bridge [ 0.645089] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] [ 0.645096] pci 0000:00:1e.0: bridge 32bit mmio: [0xe6000000-0xe60fffff] [ 0.645129] pci_bus 0000:00: on NUMA node 0 [ 0.645132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.645367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.645453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.645497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.645537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 0.645577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] [ 0.645625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT] [ 0.645663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG5._PRT] [ 0.649154] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.649242] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.649328] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12) [ 0.649411] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12) [ 0.649495] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12) [ 0.649576] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.649661] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.649745] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) [ 0.649918] SCSI subsystem initialized [ 0.649958] usbcore: registered new interface driver usbfs [ 0.649981] usbcore: registered new interface driver hub [ 0.650003] usbcore: registered new device driver usb [ 0.650088] PCI: Using ACPI for IRQ routing [ 0.655058] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.655064] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.658023] hpet: hpet2 irq 24 for MSI [ 0.658247] hpet: hpet3 irq 25 for MSI [ 0.658994] hpet: hpet4 irq 26 for MSI [ 0.659328] hpet: hpet5 irq 27 for MSI [ 0.660007] hpet: hpet6 irq 28 for MSI [ 0.662072] Switched to high resolution mode on CPU 0 [ 0.662295] Switched to high resolution mode on CPU 1 [ 0.662337] Switched to high resolution mode on CPU 7 [ 0.662342] Switched to high resolution mode on CPU 5 [ 0.662373] Switched to high resolution mode on CPU 3 [ 0.663005] Switched to high resolution mode on CPU 6 [ 0.663039] Switched to high resolution mode on CPU 2 [ 0.663042] Switched to high resolution mode on CPU 4 [ 0.664074] pnp: PnP ACPI init [ 0.664086] ACPI: bus type pnp registered [ 0.665258] pnp: PnP ACPI: found 10 devices [ 0.665260] ACPI: ACPI bus type pnp unregistered [ 0.665267] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.665270] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved [ 0.665272] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.665275] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.665277] system 00:01: iomem range 0xfed1b000-0xfed1bfff has been reserved [ 0.665280] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.665282] system 00:01: iomem range 0xfed1a000-0xfed1afff has been reserved [ 0.665285] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.665287] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.665290] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved [ 0.665292] system 00:01: iomem range 0xc0000-0xdffff has been reserved [ 0.665295] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 0.665297] system 00:01: iomem range 0xff000000-0xffffffff could not be reserved [ 0.665302] system 00:06: ioport range 0x500-0x57f has been reserved [ 0.665304] system 00:06: ioport range 0x400-0x47f has been reserved [ 0.665307] system 00:06: ioport range 0x680-0x6ff has been reserved [ 0.670051] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.670055] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.670059] pci 0000:03:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.670067] pci 0000:04:00.0: BAR 6: no parent found for of device [0xfffc0000-0xffffffff] [ 0.670070] pci 0000:05:00.0: BAR 6: no parent found for of device [0xfffc0000-0xffffffff] [ 0.670073] pci 0000:06:00.0: BAR 6: no parent found for of device [0xfffc0000-0xffffffff] [ 0.670117] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] [ 0.670120] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 0.670122] pci 0000:00:03.0: IO window: disabled [ 0.670126] pci 0000:00:03.0: MEM window: 0xe4000000-0xe5ffffff [ 0.670129] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.670134] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 0.670136] pci 0000:00:05.0: IO window: 0x6000-0x6fff [ 0.670140] pci 0000:00:05.0: MEM window: 0xe6500000-0xe65fffff [ 0.670143] pci 0000:00:05.0: PREFETCH window: 0x000000e0000000-0x000000e1ffffff [ 0.670148] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 0.670154] pci 0000:00:1c.0: IO window: 0x5000-0x5fff [ 0.670163] pci 0000:00:1c.0: MEM window: 0xe6400000-0xe64fffff [ 0.670170] pci 0000:00:1c.0: PREFETCH window: 0x000000e2000000-0x000000e3ffffff [ 0.670181] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 [ 0.670183] pci 0000:00:1c.4: IO window: 0x4000-0x4fff [ 0.670191] pci 0000:00:1c.4: MEM window: 0xe6300000-0xe63fffff [ 0.670199] pci 0000:00:1c.4: PREFETCH window: 0xe6700000-0xe67fffff [ 0.670208] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:05 [ 0.670215] pci 0000:00:1c.6: IO window: 0x3000-0x3fff [ 0.670223] pci 0000:00:1c.6: MEM window: 0xe6200000-0xe62fffff [ 0.670231] pci 0000:00:1c.6: PREFETCH window: 0xe6800000-0xe68fffff [ 0.670239] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:06 [ 0.670246] pci 0000:00:1c.7: IO window: 0x2000-0x2fff [ 0.670255] pci 0000:00:1c.7: MEM window: 0xe6100000-0xe61fffff [ 0.670263] pci 0000:00:1c.7: PREFETCH window: 0xe6900000-0xe69fffff [ 0.670271] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 0.670279] pci 0000:00:1e.0: IO window: 0x1000-0x1fff [ 0.670287] pci 0000:00:1e.0: MEM window: 0xe6000000-0xe60fffff [ 0.670294] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.670307] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.670311] pci 0000:00:03.0: setting latency timer to 64 [ 0.670315] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.670318] pci 0000:00:05.0: setting latency timer to 64 [ 0.670328] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.670333] pci 0000:00:1c.0: setting latency timer to 64 [ 0.670342] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.670350] pci 0000:00:1c.4: setting latency timer to 64 [ 0.670359] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.670364] pci 0000:00:1c.6: setting latency timer to 64 [ 0.670374] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.670379] pci 0000:00:1c.7: setting latency timer to 64 [ 0.670388] pci 0000:00:1e.0: setting latency timer to 64 [ 0.670394] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.670395] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.670397] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe5ffffff] [ 0.670398] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.670400] pci_bus 0000:02: resource 0 io: [0x6000-0x6fff] [ 0.670401] pci_bus 0000:02: resource 1 mem: [0xe6500000-0xe65fffff] [ 0.670402] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xe1ffffff] [ 0.670403] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff] [ 0.670405] pci_bus 0000:03: resource 1 mem: [0xe6400000-0xe64fffff] [ 0.670406] pci_bus 0000:03: resource 2 pref mem [0xe2000000-0xe3ffffff] [ 0.670407] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 0.670408] pci_bus 0000:04: resource 1 mem: [0xe6300000-0xe63fffff] [ 0.670410] pci_bus 0000:04: resource 2 pref mem [0xe6700000-0xe67fffff] [ 0.670411] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff] [ 0.670412] pci_bus 0000:05: resource 1 mem: [0xe6200000-0xe62fffff] [ 0.670413] pci_bus 0000:05: resource 2 pref mem [0xe6800000-0xe68fffff] [ 0.670415] pci_bus 0000:06: resource 0 io: [0x2000-0x2fff] [ 0.670416] pci_bus 0000:06: resource 1 mem: [0xe6100000-0xe61fffff] [ 0.670417] pci_bus 0000:06: resource 2 pref mem [0xe6900000-0xe69fffff] [ 0.670418] pci_bus 0000:07: resource 0 io: [0x1000-0x1fff] [ 0.670420] pci_bus 0000:07: resource 1 mem: [0xe6000000-0xe60fffff] [ 0.670421] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.670422] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.670463] NET: Registered protocol family 2 [ 0.670516] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.670795] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.671388] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.671542] TCP: Hash tables configured (established 262144 bind 65536) [ 0.671545] TCP reno registered [ 0.671609] NET: Registered protocol family 1 [ 0.673374] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.673492] NTFS driver 2.1.29 [Flags: R/O]. [ 0.673543] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.674083] msgmni has been set to 15969 [ 0.674136] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.674139] io scheduler noop registered [ 0.674141] io scheduler deadline registered [ 0.674156] io scheduler cfq registered (default) [ 0.696101] pci 0000:01:00.0: Boot video device [ 0.696298] pcieport-driver 0000:00:03.0: irq 29 for MSI/MSI-X [ 0.696303] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 0.696397] pcieport-driver 0000:00:05.0: irq 30 for MSI/MSI-X [ 0.696401] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 0.696500] pcieport-driver 0000:00:1c.0: irq 31 for MSI/MSI-X [ 0.696510] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.696616] pcieport-driver 0000:00:1c.4: irq 32 for MSI/MSI-X [ 0.696625] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.696735] pcieport-driver 0000:00:1c.6: irq 33 for MSI/MSI-X [ 0.696745] pcieport-driver 0000:00:1c.6: setting latency timer to 64 [ 0.696859] pcieport-driver 0000:00:1c.7: irq 34 for MSI/MSI-X [ 0.696869] pcieport-driver 0000:00:1c.7: setting latency timer to 64 [ 0.697093] aer 0000:00:03.0:pcie02: service driver aer loaded [ 0.697121] aer 0000:00:05.0:pcie02: service driver aer loaded [ 0.697243] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 2560k, total 262144k [ 0.697246] vesafb: mode is 1280x1024x8, linelength=1280, pages=1 [ 0.697248] vesafb: scrolling: redraw [ 0.697250] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 [ 0.740267] Console: switching to colour frame buffer device 160x64 [ 0.783515] fb0: VESA VGA frame buffer device [ 0.783784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.784147] ACPI: Power Button [PWRF] [ 0.784361] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.784752] ACPI: Sleep Button [SLPB] [ 0.786233] Linux agpgart interface v0.103 [ 0.786790] loop: module loaded [ 0.786974] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. [ 0.787345] 3w-9xxx 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.787678] 3w-9xxx 0000:02:00.0: setting latency timer to 64 [ 1.041983] scsi0 : 3ware 9000 Storage Controller [ 1.042325] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xe6500000, IRQ: 16. [ 1.347899] 3w-9xxx: scsi0: Firmware FE9X 4.06.00.004, BIOS BE9X 4.05.00.015, Ports: 16. [ 1.348313] 3w-9xxx 0000:02:00.0: irq 35 for MSI/MSI-X [ 1.348622] scsi 0:0:0:0: Direct-Access AMCC 9650SE-16M DISK 4.06 PQ: 0 ANSI: 5 [ 1.356060] 3w-9xxx 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.356419] 3w-9xxx 0000:03:00.0: setting latency timer to 64 [ 1.559842] scsi1 : 3ware 9000 Storage Controller [ 1.560175] 3w-9xxx: scsi1: Found a 3ware 9000 Storage Controller at 0xe6400000, IRQ: 16. [ 1.865761] 3w-9xxx: scsi1: Firmware FE9X 4.06.00.004, BIOS BE9X 4.05.00.015, Ports: 4. [ 1.866194] 3w-9xxx 0000:03:00.0: irq 36 for MSI/MSI-X [ 1.866521] scsi 1:0:0:0: Direct-Access AMCC 9650SE-4LP DISK 4.06 PQ: 0 ANSI: 5 [ 1.874897] sd 0:0:0:0: [sda] 25390350336 512-byte logical blocks: (12.9 TB/11.8 TiB) [ 1.874909] firewire_ohci 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.874958] sd 1:0:0:0: [sdb] 292947968 512-byte logical blocks: (149 GB/139 GiB) [ 1.875390] sd 1:0:0:0: [sdb] Write Protect is off [ 1.875391] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1.875678] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.876501] sdb: sdb1 sdb2 [ 1.877370] sd 0:0:0:0: [sda] Write Protect is off [ 1.877621] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 1.877924] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.878476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.880550] sda: sda1 [ 1.910624] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.931741] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10 [ 1.932155] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.932475] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.932821] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.932827] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.933088] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.937341] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.937558] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 1.937570] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe6625c00 [ 1.943743] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.944046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.944365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.954633] usb usb1: Product: EHCI Host Controller [ 1.965025] usb usb1: Manufacturer: Linux 2.6.31.5 ehci_hcd [ 1.975616] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.986360] usb usb1: configuration #1 chosen from 1 choice [ 1.997298] hub 1-0:1.0: USB hub found [ 2.008298] hub 1-0:1.0: 3 ports detected [ 2.019422] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.030910] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.030916] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.042477] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.058232] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.070122] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 2.070135] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xe6625800 [ 2.088947] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.101138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.113616] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.126297] usb usb2: Product: EHCI Host Controller [ 2.139106] usb usb2: Manufacturer: Linux 2.6.31.5 ehci_hcd [ 2.152117] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.165267] usb usb2: configuration #1 chosen from 1 choice [ 2.178608] hub 2-0:1.0: USB hub found [ 2.192024] hub 2-0:1.0: 3 ports detected [ 2.205560] ehci_hcd 0000:07:01.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 2.219474] ehci_hcd 0000:07:01.2: EHCI Host Controller [ 2.233459] ehci_hcd 0000:07:01.2: new USB bus registered, assigned bus number 3 [ 2.247749] ehci_hcd 0000:07:01.2: irq 20, io mem 0xe6004800 [ 2.267900] ehci_hcd 0000:07:01.2: USB 2.0 started, EHCI 1.00 [ 2.281928] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.295953] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.309891] usb usb3: Product: EHCI Host Controller [ 2.323646] usb usb3: Manufacturer: Linux 2.6.31.5 ehci_hcd [ 2.337283] usb usb3: SerialNumber: 0000:07:01.2 [ 2.350945] usb usb3: configuration #1 chosen from 1 choice [ 2.364663] hub 3-0:1.0: USB hub found [ 2.369625] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.391846] hub 3-0:1.0: 4 ports detected [ 2.405376] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.418908] uhci_hcd: USB Universal Host Controller Interface driver [ 2.432382] uhci_hcd 0000:07:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.432422] firewire_core: created device fw0: GUID 0090270002523482, S400 [ 2.459159] uhci_hcd 0000:07:01.0: UHCI Host Controller [ 2.472469] uhci_hcd 0000:07:01.0: new USB bus registered, assigned bus number 4 [ 2.483894] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.483895] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.483939] usb 1-1: configuration #1 chosen from 1 choice [ 2.484053] hub 1-1:1.0: USB hub found [ 2.484146] hub 1-1:1.0: 6 ports detected [ 2.550507] uhci_hcd 0000:07:01.0: irq 22, io base 0x00001020 [ 2.563201] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.575950] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.588581] usb usb4: Product: UHCI Host Controller [ 2.601192] usb usb4: Manufacturer: Linux 2.6.31.5 uhci_hcd [ 2.613909] usb usb4: SerialNumber: 0000:07:01.0 [ 2.626503] usb usb4: configuration #1 chosen from 1 choice [ 2.638958] hub 4-0:1.0: USB hub found [ 2.651348] hub 4-0:1.0: 2 ports detected [ 2.663580] uhci_hcd 0000:07:01.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.675906] uhci_hcd 0000:07:01.1: UHCI Host Controller [ 2.688076] uhci_hcd 0000:07:01.1: new USB bus registered, assigned bus number 5 [ 2.700390] uhci_hcd 0000:07:01.1: irq 21, io base 0x00001000 [ 2.712629] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.724980] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.727519] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.750027] usb usb5: Product: UHCI Host Controller [ 2.762501] usb usb5: Manufacturer: Linux 2.6.31.5 uhci_hcd [ 2.774993] usb usb5: SerialNumber: 0000:07:01.1 [ 2.787511] usb usb5: configuration #1 chosen from 1 choice [ 2.799938] hub 5-0:1.0: USB hub found [ 2.812298] hub 5-0:1.0: 2 ports detected [ 2.824641] Initializing USB Mass Storage driver... [ 2.836999] usbcore: registered new interface driver usb-storage [ 2.841841] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.841842] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.841903] usb 2-1: configuration #1 chosen from 1 choice [ 2.842118] hub 2-1:1.0: USB hub found [ 2.842209] hub 2-1:1.0: 8 ports detected [ 2.911937] USB Mass Storage support registered. [ 2.924524] PNP: No PS/2 controller found. Probing ports directly. [ 2.939635] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.952116] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.964420] mice: PS/2 mouse device common for all mice [ 2.976823] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 2.989364] rtc_cmos 00:03: RTC can wake from S4 [ 3.001988] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.014543] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.027291] i2c /dev entries driver [ 3.039885] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.052924] coretemp coretemp.0: Using relative temperature scale! [ 3.065820] coretemp coretemp.1: Using relative temperature scale! [ 3.078579] coretemp coretemp.2: Using relative temperature scale! [ 3.091237] coretemp coretemp.3: Using relative temperature scale! [ 3.103694] coretemp coretemp.4: Using relative temperature scale! [ 3.115974] coretemp coretemp.5: Using relative temperature scale! [ 3.128061] coretemp coretemp.6: Using relative temperature scale! [ 3.139979] coretemp coretemp.7: Using relative temperature scale! [ 3.142402] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 3.163689] cpuidle: using governor ladder [ 3.175482] cpuidle: using governor menu [ 3.187506] usbcore: registered new interface driver hiddev [ 3.199173] usbcore: registered new interface driver usbhid [ 3.210632] usbhid: v2.6:USB HID core driver [ 3.222068] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 3.233714] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3.245296] HDA Intel 0000:00:1b.0: irq 37 for MSI/MSI-X [ 3.245326] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 3.289123] ALSA device list: [ 3.300467] #0: HDA Intel at 0xe6620000 irq 37 [ 3.311875] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.323651] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.335092] TCP cubic registered [ 3.346383] NET: Registered protocol family 17 [ 3.357889] RPC: Registered udp transport module. [ 3.369284] RPC: Registered tcp transport module. [ 3.371033] usb 4-1: New USB device found, idVendor=051d, idProduct=0002 [ 3.371035] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.371036] usb 4-1: Product: Back-UPS RS 1500 LCD FW:839.H7 .D USB FW:H7 [ 3.371037] usb 4-1: Manufacturer: American Power Conversion [ 3.371038] usb 4-1: SerialNumber: 8B0822R34475 [ 3.371088] usb 4-1: configuration #1 chosen from 1 choice [ 3.448282] rtc_cmos 00:03: setting system clock to 2009-11-12 18:36:34 UTC (1258050994) [ 4.540890] generic-usb 0003:051D:0002.0001: hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 LCD FW:839.H7 .D USB FW:H7 ] on usb-0000:07:01.0-1/input0 [ 4.584674] UDF-fs: No partition found (1) [ 4.607866] XFS mounting filesystem sdb2 [ 4.638182] usb 2-1.6: new full speed USB device using ehci_hcd and address 3 [ 4.698658] Ending clean XFS mount for filesystem: sdb2 [ 4.698698] VFS: Mounted root (xfs filesystem) readonly on device 8:18. [ 4.710879] Freeing unused kernel memory: 372k freed [ 4.723057] Write protecting the kernel read-only data: 4996k [ 4.788403] usb 2-1.6: New USB device found, idVendor=0a12, idProduct=0001 [ 4.800654] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.813036] usb 2-1.6: configuration #1 chosen from 1 choice [ 4.899130] usb 2-1.7: new full speed USB device using ehci_hcd and address 4 [ 4.996968] usb 2-1.7: New USB device found, idVendor=413c, idProduct=1002 [ 5.009756] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.022547] usb 2-1.7: Product: Dell USB Keyboard Hub [ 5.035256] usb 2-1.7: Manufacturer: Dell [ 5.047852] usb 2-1.7: configuration #1 chosen from 1 choice [ 5.061119] hub 2-1.7:1.0: USB hub found [ 5.073705] hub 2-1.7:1.0: 3 ports detected [ 5.348030] usb 2-1.7.1: new full speed USB device using ehci_hcd and address 5 [ 5.436245] usb 2-1.7.1: New USB device found, idVendor=413c, idProduct=2002 [ 5.449031] usb 2-1.7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.461762] usb 2-1.7.1: Product: Dell USB Keyboard Hub [ 5.474428] usb 2-1.7.1: Manufacturer: Dell [ 5.487209] usb 2-1.7.1: configuration #1 chosen from 1 choice [ 5.501365] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.1/2-1.7.1:1.0/input/input3 [ 5.514671] generic-usb 0003:413C:2002.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-1.7.1/input0 [ 5.529899] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.1/2-1.7.1:1.1/input/input4 [ 5.543823] generic-usb 0003:413C:2002.0003: input: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-1.7.1/input1 [ 5.605974] usb 2-1.7.2: new low speed USB device using ehci_hcd and address 6 [ 5.709558] usb 2-1.7.2: New USB device found, idVendor=0461, idProduct=4d15 [ 5.723953] usb 2-1.7.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 5.738472] usb 2-1.7.2: Product: USB Optical Mouse [ 5.753081] usb 2-1.7.2: configuration #1 chosen from 1 choice [ 5.769901] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.2/2-1.7.2:1.0/input/input5 [ 5.785431] generic-usb 0003:0461:4D15.0004: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.7.2/input0 [ 6.171395] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.15-NAPI [ 6.187743] e1000e: Copyright(c) 1999 - 2009 Intel Corporation. [ 6.204271] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 6.221022] e1000e 0000:00:19.0: setting latency timer to 64 [ 6.221268] e1000e 0000:00:19.0: irq 38 for MSI/MSI-X [ 6.651705] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:f6:b6:50 [ 6.668568] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 6.685624] 0000:00:19.0: eth0: MAC: 10, PHY: 9, PBA No: ffffff-0ff [ 6.702633] e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.719623] e1000e 0000:04:00.0: setting latency timer to 64 [ 6.720272] e1000e 0000:04:00.0: irq 39 for MSI/MSI-X [ 6.720274] e1000e 0000:04:00.0: irq 40 for MSI/MSI-X [ 6.799793] 0000:04:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:43:79:b1 [ 6.804111] udev: renamed network interface eth1 to eth2 [ 6.833739] 0000:04:00.0: eth2: Intel(R) PRO/1000 Network Connection [ 6.850831] 0000:04:00.0: eth2: MAC: 4, PHY: 8, PBA No: e46981-003 [ 6.867900] e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.884978] e1000e 0000:05:00.0: setting latency timer to 64 [ 6.885598] e1000e 0000:05:00.0: irq 41 for MSI/MSI-X [ 6.885600] e1000e 0000:05:00.0: irq 42 for MSI/MSI-X [ 6.966753] 0000:05:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:43:7b:9e [ 6.983929] 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 7.001129] 0000:05:00.0: eth1: MAC: 4, PHY: 8, PBA No: e46981-003 [ 7.487735] Adding 16787884k swap on /dev/sdb1. Priority:-1 extents:1 across:16787884k [ 7.976077] XFS mounting filesystem sda1 [ 8.139344] Ending clean XFS mount for filesystem: sda1 [ 8.946085] e1000e 0000:00:19.0: irq 38 for MSI/MSI-X [ 8.997101] e1000e 0000:00:19.0: irq 38 for MSI/MSI-X [ 11.395553] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 11.411855] 0000:04:00.0: eth2: 10/100 speed: disabling TSO [ 11.476544] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 11.492988] 0000:05:00.0: eth1: 10/100 speed: disabling TSO [ 12.539968] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/