Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932656AbZKYRH6 (ORCPT ); Wed, 25 Nov 2009 12:07:58 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932618AbZKYRHz (ORCPT ); Wed, 25 Nov 2009 12:07:55 -0500 Received: from mail-ew0-f219.google.com ([209.85.219.219]:57397 "EHLO mail-ew0-f219.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932456AbZKYRHv (ORCPT ); Wed, 25 Nov 2009 12:07:51 -0500 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:date:message-id:in-reply-to:references:subject; b=ZtaEHnoO0L/w6WupZsq686uXH2Xmy7CjWF8Y8296pKkTIg7sY4H1OLBSJRiKQjaaVM m8fyWA7y7bgJTBEHymC+UQR/n6YL5nqVembaObgZf5hoCW5ci5TBHD1zC8WG7Ogp8HId 0ksZY5OGNjuYJ6Rs/WQ/V7IYA3j7shNftlhpE= From: Bartlomiej Zolnierkiewicz To: linux-ide@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz , linux-kernel@vger.kernel.org Date: Wed, 25 Nov 2009 18:07:12 +0100 Message-Id: <20091125170712.5446.50300.sendpatchset@localhost> In-Reply-To: <20091125170218.5446.13513.sendpatchset@localhost> References: <20091125170218.5446.13513.sendpatchset@localhost> Subject: [PATCH 41/86] pata_efar: unify code for programming PIO and MWDMA timings Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5426 Lines: 162 From: Bartlomiej Zolnierkiewicz Subject: [PATCH] pata_it8213: unify code for programming PIO and MWDMA timings It results in ~9% decrease in the driver LOC count and also ~6% decrease in the driver binary size (as measured on x86-32). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ata/pata_it8213.c | 87 +++++++++++++++------------------------------- 1 file changed, 29 insertions(+), 58 deletions(-) Index: b/drivers/ata/pata_it8213.c =================================================================== --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -61,20 +61,9 @@ static int it8213_cable_detect(struct at return ATA_CBL_PATA80; } -/** - * it8213_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: Device whose timings we are configuring - * - * Set PIO mode for device, in host controller PCI config space. - * - * LOCKING: - * None (inherited from caller). - */ - -static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev) +static void it8213_set_timings(struct ata_port *ap, struct ata_device *adev, + u8 pio, bool use_mwdma) { - unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host->dev); u8 master_port = ap->port_no ? 0x42 : 0x40; u16 master_data; @@ -92,13 +81,18 @@ static void it8213_set_piomode (struct a { 2, 1 }, { 2, 3 }, }; - if (pio > 1) + if (pio > 1 || use_mwdma) control |= 1; /* TIME */ - if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ + if (ata_pio_need_iordy(adev) || use_mwdma) control |= 2; /* IE */ /* Bit 2 is set for ATAPI on the IT8213 - reverse of ICH/PIIX */ if (adev->class != ATA_DEV_ATA) control |= 4; /* PPE */ + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + if (use_mwdma && adev->pio_mode < (XFER_PIO_0 + pio)) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ pci_read_config_word(dev, master_port, &master_data); @@ -127,6 +121,22 @@ static void it8213_set_piomode (struct a } /** + * it8213_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device whose timings we are configuring + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void it8213_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + it8213_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0, 0); +} + +/** * it8213_set_dmamode - Initialize host controller PATA DMA timings * @ap: Port whose timings we are configuring * @adev: Device to program @@ -141,23 +151,14 @@ static void it8213_set_piomode (struct a static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev) { struct pci_dev *dev = to_pci_dev(ap->host->dev); - u16 master_data; u8 speed = adev->dma_mode; int devid = adev->devno; u8 udma_enable; - static const /* ISP RTC */ - u8 timings[][2] = { { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; - - pci_read_config_word(dev, 0x40, &master_data); pci_read_config_byte(dev, 0x48, &udma_enable); if (speed >= XFER_UDMA_0) { - unsigned int udma = adev->dma_mode - XFER_UDMA_0; + unsigned int udma = speed - XFER_UDMA_0; u16 udma_timing; u16 ideconf; int u_clock, u_speed; @@ -185,46 +186,16 @@ static void it8213_set_dmamode (struct a ideconf |= u_clock << devid; pci_write_config_word(dev, 0x54, ideconf); } else { - /* - * MWDMA is driven by the PIO timings. We must also enable - * IORDY unconditionally along with TIME1. PPE has already - * been set when the PIO timing was set. - */ - unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; - unsigned int control; - u8 slave_data; + /* MWDMA is driven by the PIO timings. */ + unsigned int mwdma = speed - XFER_MW_DMA_0; static const unsigned int needed_pio[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 }; int pio = needed_pio[mwdma] - XFER_PIO_0; - control = 3; /* IORDY|TIME1 */ - - /* If the drive MWDMA is faster than it can do PIO then - we must force PIO into PIO0 */ + it8213_set_timings(ap, adev, pio, 1); - if (adev->pio_mode < needed_pio[mwdma]) - /* Enable DMA timing only */ - control |= 8; /* PIO cycles in PIO0 */ - - if (devid) { /* Slave */ - master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ - master_data |= control << 4; - pci_read_config_byte(dev, 0x44, &slave_data); - slave_data &= 0xF0; - /* Load the matching timing */ - slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); - pci_write_config_byte(dev, 0x44, slave_data); - } else { /* Master */ - master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY - and master timing bits */ - master_data |= control; - master_data |= - (timings[pio][0] << 12) | - (timings[pio][1] << 8); - } udma_enable &= ~(1 << devid); - pci_write_config_word(dev, 0x40, master_data); } pci_write_config_byte(dev, 0x48, udma_enable); } -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/