Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933579AbZKYRLJ (ORCPT ); Wed, 25 Nov 2009 12:11:09 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S933241AbZKYRLE (ORCPT ); Wed, 25 Nov 2009 12:11:04 -0500 Received: from mail-ew0-f219.google.com ([209.85.219.219]:39574 "EHLO mail-ew0-f219.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759378AbZKYRKs (ORCPT ); Wed, 25 Nov 2009 12:10:48 -0500 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:date:message-id:in-reply-to:references:subject; b=mrYdtFeKnTT6WdiGxvR3u1OsBQ/QkpZvdi2uLLgDdTIVishSymlH71GspHFl0FiKn9 NJHKXC/6JnczEWMz54KVU8IdGQSqa0AjP4am/wGDOn4XTjrXQu05C1kbjeNnQx7abmt4 sJadF8uFTl+WRqQxy04h+9ONdGQsXpJ01GM0c= From: Bartlomiej Zolnierkiewicz To: linux-ide@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz , linux-kernel@vger.kernel.org Date: Wed, 25 Nov 2009 18:10:10 +0100 Message-Id: <20091125171010.5446.8481.sendpatchset@localhost> In-Reply-To: <20091125170218.5446.13513.sendpatchset@localhost> References: <20091125170218.5446.13513.sendpatchset@localhost> Subject: [PATCH 65/86] pata_rdc: unify code for programming PIO and MWDMA timings Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5826 Lines: 177 From: Bartlomiej Zolnierkiewicz Subject: [PATCH] pata_rdc: unify code for programming PIO and MWDMA timings It results in ~8% decrease in the driver LOC count and also ~8% decrease in the driver binary size (as measured on x86-32). Fix rdc_set_piomode() documentation while at it. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ata/pata_rdc.c | 99 ++++++++++++++++--------------------------------- 1 file changed, 33 insertions(+), 66 deletions(-) Index: b/drivers/ata/pata_rdc.c =================================================================== --- a/drivers/ata/pata_rdc.c +++ b/drivers/ata/pata_rdc.c @@ -85,20 +85,9 @@ static int rdc_pata_prereset(struct ata_ return ata_sff_prereset(link, deadline); } -/** - * rdc_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set PIO mode for device, in host controller PCI config space. - * - * LOCKING: - * None (inherited from caller). - */ - -static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void rdc_set_timings(struct ata_port *ap, struct ata_device *adev, + u8 pio, bool use_mwdma) { - unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host->dev); unsigned int is_slave = (adev->devno != 0); unsigned int master_port= ap->port_no ? 0x42 : 0x40; @@ -115,13 +104,17 @@ static void rdc_set_piomode(struct ata_p { 2, 1 }, { 2, 3 }, }; - if (pio >= 2) + if (pio >= 2 || use_mwdma) control |= 1; /* TIME1 enable */ - if (ata_pio_need_iordy(adev)) + if (ata_pio_need_iordy(adev) || use_mwdma) control |= 2; /* IE enable */ - if (adev->class == ATA_DEV_ATA) control |= 4; /* PPE enable */ + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + if (use_mwdma && adev->pio_mode < (XFER_PIO_0 + pio)) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ /* PIO configuration clears DTE unconditionally. It will be * programmed in set_dmamode which is guaranteed to be called @@ -163,6 +156,22 @@ static void rdc_set_piomode(struct ata_p } /** + * rdc_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Drive in question + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + rdc_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0, 0); +} + +/** * rdc_set_dmamode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Drive in question @@ -176,28 +185,18 @@ static void rdc_set_piomode(struct ata_p static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *dev = to_pci_dev(ap->host->dev); - u8 master_port = ap->port_no ? 0x42 : 0x40; - u16 master_data; u8 speed = adev->dma_mode; int devid = adev->devno + 2 * ap->port_no; u8 udma_enable = 0; - static const /* ISP RTC */ - u8 timings[][2] = { { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; - - pci_read_config_word(dev, master_port, &master_data); - pci_read_config_byte(dev, 0x48, &udma_enable); - if (speed >= XFER_UDMA_0) { - unsigned int udma = adev->dma_mode - XFER_UDMA_0; + unsigned int udma = speed - XFER_UDMA_0; u16 udma_timing; u16 ideconf; int u_clock, u_speed; + pci_read_config_byte(dev, 0x48, &udma_enable); + /* * UDMA is handled by a combination of clock switching and * selection of dividers @@ -226,50 +225,18 @@ static void rdc_set_dmamode(struct ata_p ideconf &= ~(0x1001 << devid); ideconf |= u_clock << devid; pci_write_config_word(dev, 0x54, ideconf); + + pci_write_config_byte(dev, 0x48, udma_enable); } else { - /* - * MWDMA is driven by the PIO timings. We must also enable - * IORDY unconditionally along with TIME1. PPE has already - * been set when the PIO timing was set. - */ - unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; - unsigned int control; - u8 slave_data; + /* MWDMA is driven by the PIO timings. */ + unsigned int mwdma = speed - XFER_MW_DMA_0; const unsigned int needed_pio[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 }; int pio = needed_pio[mwdma] - XFER_PIO_0; - control = 3; /* IORDY|TIME1 */ - - /* If the drive MWDMA is faster than it can do PIO then - we must force PIO into PIO0 */ - - if (adev->pio_mode < needed_pio[mwdma]) - /* Enable DMA timing only */ - control |= 8; /* PIO cycles in PIO0 */ - - if (adev->devno) { /* Slave */ - master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ - master_data |= control << 4; - pci_read_config_byte(dev, 0x44, &slave_data); - slave_data &= (ap->port_no ? 0x0f : 0xf0); - /* Load the matching timing */ - slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); - pci_write_config_byte(dev, 0x44, slave_data); - } else { /* Master */ - master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY - and master timing bits */ - master_data |= control; - master_data |= - (timings[pio][0] << 12) | - (timings[pio][1] << 8); - } - - udma_enable &= ~(1 << devid); - pci_write_config_word(dev, master_port, master_data); + rdc_set_timings(ap, adev, pio, 1); } - pci_write_config_byte(dev, 0x48, udma_enable); } static struct ata_port_operations rdc_pata_ops = { -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/