Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756648AbZLDPlN (ORCPT ); Fri, 4 Dec 2009 10:41:13 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755344AbZLDPlL (ORCPT ); Fri, 4 Dec 2009 10:41:11 -0500 Received: from hrndva-omtalb.mail.rr.com ([71.74.56.122]:47165 "EHLO hrndva-omtalb.mail.rr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752139AbZLDPlF (ORCPT ); Fri, 4 Dec 2009 10:41:05 -0500 Date: Fri, 4 Dec 2009 10:41:09 -0500 From: Steven Rostedt To: werner Cc: linux-kernel@vger.kernel.org, Mel Gorman , David Rientjes , Arnaldo Carvalho de Melo , "David S. Miller" , "Rafael J. Wysocki" , Andrew Morton Subject: Re: kernel problem Message-ID: <20091204154109.GB1716@goodmis.org> References: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 60130 Lines: 1306 [ Added Cc's of people that may be interested in this ] On Thu, Dec 03, 2009 at 03:40:29AM -0400, werner wrote: > problem during booting with 2.6.32-rc8-git5, whole dmesg below > w.landgraf@ru.ru > > ------------[ cut here ]------------ > WARNING: at mm/page_alloc.c:1805 > __alloc_pages_nodemask+0x127/0x48f() > Hardware name: System Product Name > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.32-rc8-git5 #1 > Call Trace: > [] warn_slowpath_common+0x65/0x95 > [] warn_slowpath_null+0x12/0x15 > [] __alloc_pages_nodemask+0x127/0x48f > [] ? get_slab+0x8/0x50 > [] alloc_page_interleave+0x2e/0x6e > [] alloc_pages_current+0x57/0x99 > [] ? xd_init+0x0/0x482 > [] __get_free_pages+0xd/0x1e > [] xd_init+0x4a/0x482 > [] ? loop_init+0x104/0x16a > [] ? loop_probe+0x0/0xaf > [] ? xd_init+0x0/0x482 > [] do_one_initcall+0x51/0x13f > [] kernel_init+0x10b/0x15f > [] ? kernel_init+0x0/0x15f > [] kernel_thread_helper+0x7/0x10 > ---[ end trace 686db6333ade6e7a ]--- > > =========================================== > > Linux version 2.6.32-rc8-git5 (root@werner) (gcc version 4.3.3 (GCC) > ) #1 SMP Thu Dec 3 04:14:36 GFT 2009 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > NSC Geode by NSC > Cyrix CyrixInstead > Centaur CentaurHauls > Transmeta GenuineTMx86 > Transmeta TransmetaCPU > UMC UMC UMC UMC > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) > BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) > BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) > BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > BIOS-e820: 0000000100000000 - 0000000240000000 (usable) > DMI 2.4 present. > Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. > e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> > (reserved) > last_pfn = 0x240000 max_arch_pfn = 0x1000000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > A0000-BFFFF uncachable > C0000-C7FFF write-protect > C8000-FFFFF uncachable > MTRR variable ranges enabled: > 0 base 0000000000 mask FF80000000 write-back > 1 base 0080000000 mask FFC0000000 write-back > 2 base 0100000000 mask FF00000000 write-back > 3 base 0200000000 mask FFC0000000 write-back > 4 disabled > 5 disabled > 6 disabled > 7 disabled > TOM2: 0000000240000000 aka 9216M > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> > (reserved) > Scanning 0 areas for low memory corruption > modified physical RAM map: > modified: 0000000000000000 - 0000000000010000 (reserved) > modified: 0000000000010000 - 000000000009f000 (usable) > modified: 000000000009f000 - 00000000000a0000 (reserved) > modified: 00000000000f0000 - 0000000000100000 (reserved) > modified: 0000000000100000 - 00000000bfee0000 (usable) > modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) > modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data) > modified: 00000000bfef0000 - 00000000bff00000 (reserved) > modified: 00000000f0000000 - 00000000f4000000 (reserved) > modified: 00000000fec00000 - 0000000100000000 (reserved) > modified: 0000000100000000 - 0000000240000000 (usable) > initial memory mapped : 0 - 02600000 > init_memory_mapping: 0000000000000000-00000000377fe000 > NX (Execute Disable) protection: active > 0000000000 - 0000200000 page 4k > 0000200000 - 0037600000 page 2M > 0037600000 - 00377fe000 page 4k > kernel direct mapping tables up to 377fe000 @ 10000-17000 > ACPI: RSDP 000f6fd0 00024 (v02 Nvidia) > ACPI: XSDT bfee30c0 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD > 00000000) > ACPI: FACP bfeeb840 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD > 00000000) > ACPI: DSDT bfee3240 08581 (v01 NVIDIA ASUSACPI 00001000 MSFT > 03000000) > ACPI: FACS bfee0000 00040 > ACPI: MCFG bfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD > 00000000) > ACPI: APIC bfeeb980 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD > 00000000) > found SMP MP-table at [c00f5440] f5440 > Intel MultiProcessor Specification v1.4 > Virtual Wire compatibility mode. > MPTABLE: OEM ID: OEM00000 > MPTABLE: Product ID: PROD00000000 > MPTABLE: APIC at: 0xFEE00000 > Warning! Not a NUMA-Q system! > could not find any ACPI SRAT memory areas. > failed to get NUMA memory information from SRAT table > NUMA - single node, flat memory mode > Node: 0, start_pfn: 0, end_pfn: 240000 > Setting physnode_map array to node 0 for pfns: > 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 > 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 > 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 > 88000 8c000 90000 94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 > b4000 b8000 bc000 c0000 c4000 c8000 cc000 d0000 d4000 d8000 dc000 > e0000 e4000 e8000 ec000 f0000 f4000 f8000 fc000 100000 104000 108000 > 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 > 130000 134000 138000 13c000 140000 144000 148000 14c000 150000 > 154000 158000 15c000 160000 164000 168000 16c000 170000 174000 > 178000 17c000 180000 184000 188000 18c000 190000 194000 198000 > 19c000 1a0000 1a4000 1a8000 1ac000 1b0000 1b4000 1b8000 1bc000 > 1c0000 1c4000 1c8000 1cc000 1d0000 1d4000 1d8000 1dc000 1e0000 > 1e4000 1e8000 1ec000 1f0000 1f4000 1f8000 1fc000 200000 204000 > 208000 20c000 210000 214000 218000 21c000 220000 224000 228000 > 22c000 230000 234000 238000 23c000 > node 0 pfn: [0 - 240000] > Reserving 18944 pages of KVA for lmem_map of node 0 at 23b600 > remove_active_range (0, 2340352, 2359296) > Reserving total of 4a00 pages for numa KVA remap > kva_start_pfn ~ 32c00 max_low_pfn ~ 377fe > max_pfn = 240000 > 8328MB HIGHMEM available. > 887MB LOWMEM available. > max_low_pfn = 377fe, highstart_pfn = 377fe > Low memory ends at vaddr f77fe000 > node 0 will remap to vaddr f2c00000 - f7600000 > allocate_pgdat: node 0 NODE_DATA f2c00000 > remap_numa_kva: node 0 > remap_numa_kva: f2c00000 to pfn 0023b600 > remap_numa_kva: f2e00000 to pfn 0023b800 > remap_numa_kva: f3000000 to pfn 0023ba00 > remap_numa_kva: f3200000 to pfn 0023bc00 > remap_numa_kva: f3400000 to pfn 0023be00 > remap_numa_kva: f3600000 to pfn 0023c000 > remap_numa_kva: f3800000 to pfn 0023c200 > remap_numa_kva: f3a00000 to pfn 0023c400 > remap_numa_kva: f3c00000 to pfn 0023c600 > remap_numa_kva: f3e00000 to pfn 0023c800 > remap_numa_kva: f4000000 to pfn 0023ca00 > remap_numa_kva: f4200000 to pfn 0023cc00 > remap_numa_kva: f4400000 to pfn 0023ce00 > remap_numa_kva: f4600000 to pfn 0023d000 > remap_numa_kva: f4800000 to pfn 0023d200 > remap_numa_kva: f4a00000 to pfn 0023d400 > remap_numa_kva: f4c00000 to pfn 0023d600 > remap_numa_kva: f4e00000 to pfn 0023d800 > remap_numa_kva: f5000000 to pfn 0023da00 > remap_numa_kva: f5200000 to pfn 0023dc00 > remap_numa_kva: f5400000 to pfn 0023de00 > remap_numa_kva: f5600000 to pfn 0023e000 > remap_numa_kva: f5800000 to pfn 0023e200 > remap_numa_kva: f5a00000 to pfn 0023e400 > remap_numa_kva: f5c00000 to pfn 0023e600 > remap_numa_kva: f5e00000 to pfn 0023e800 > remap_numa_kva: f6000000 to pfn 0023ea00 > remap_numa_kva: f6200000 to pfn 0023ec00 > remap_numa_kva: f6400000 to pfn 0023ee00 > remap_numa_kva: f6600000 to pfn 0023f000 > remap_numa_kva: f6800000 to pfn 0023f200 > remap_numa_kva: f6a00000 to pfn 0023f400 > remap_numa_kva: f6c00000 to pfn 0023f600 > remap_numa_kva: f6e00000 to pfn 0023f800 > remap_numa_kva: f7000000 to pfn 0023fa00 > remap_numa_kva: f7200000 to pfn 0023fc00 > remap_numa_kva: f7400000 to pfn 0023fe00 > High memory starts at vaddr f77fe000 > mapped low ram: 0 - 377fe000 > low ram: 0 - 377fe000 > node 0 low ram: 00000000 - 377fe000 > node 0 bootmap 00014000 - 0001af00 > (10 early reservations) ==> bootmem [0000000000 - 00377fe000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - > 0000001000] > #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - > 0000002000] > #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - > 0000007000] > #3 [0001000000 - 0002217fa8] TEXT DATA BSS ==> [0001000000 - > 0002217fa8] > #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - > 0000100000] > #5 [0002218000 - 000222b14d] BRK ==> [0002218000 - > 000222b14d] > #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - > 0000014000] > #7 [023b600000 - 0240000000] KVA RAM > #8 [0032c00000 - 0037600000] KVA PG ==> [0032c00000 - > 0037600000] > #9 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - > 000001b000] > found SMP MP-table at [c00f5440] f5440 > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > Normal 0x00001000 -> 0x000377fe > HighMem 0x000377fe -> 0x00240000 > Movable zone start PFN for each node > early_node_map[3] active PFN ranges > 0: 0x00000010 -> 0x0000009f > 0: 0x00000100 -> 0x000bfee0 > 0: 0x00100000 -> 0x0023b600 > On node 0 totalpages: 2077807 > free_area_init_node: node 0, pgdat f2c00000, node_mem_map f2c02200 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3951 pages, LIFO batch:0 > Normal zone: 1744 pages used for memmap > Normal zone: 221486 pages, LIFO batch:31 > HighMem zone: 16509 pages used for memmap > HighMem zone: 1834085 pages, LIFO batch:31 > Using APIC driver default > Nvidia board detected. Ignoring ACPI timer override. > If you got timer trouble try acpi_use_timer_override > ACPI: No APIC-table, disabling MPS > SFI: Simple Firmware Interface v0.7 http://simplefirmware.org > SMP: Allowing 1 CPUs, 0 hotplug CPUs > APIC: disable apic facility > nr_irqs_gsi: 16 > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 > PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > Allocating PCI resources starting at bff00000 (gap: > bff00000:30100000) > Booting paravirtualized kernel on bare hardware > NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:16 > PERCPU: Embedded 14 pages/cpu @c2400000 s35128 r0 d22216 u2097152 > pcpu-alloc: s35128 r0 d22216 u2097152 alloc=1*2097152 > pcpu-alloc: [0] 0 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 2059522 > Policy zone: HighMem > Kernel command line: BOOT_IMAGE=2632rc8git5 ro root=801 4 > root=/dev/sda1 devfs=nomount noapic nolapic acpi=ht rootwait > PID hash table entries: 4096 (order: 2, 16384 bytes) > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > Initializing HighMem for node 0 (000377fe:0023b600) > Memory: 8215892k/9437184k available (12244k kernel code, 95336k > reserved, 4434k data, 852k init, 7402376k highmem) > virtual kernel memory layout: > fixmap : 0xffd55000 - 0xfffff000 (2728 kB) > pkmap : 0xff800000 - 0xffa00000 (2048 kB) > vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > .init : 0xc204a000 - 0xc211f000 ( 852 kB) > .data : 0xc1bf50d9 - 0xc2049bc8 (4434 kB) > .text : 0xc1000000 - 0xc1bf50d9 (12244 kB) > Checking if this processor honours the WP bit even in supervisor > mode...Ok. > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, > Nodes=16 > Hierarchical RCU implementation. > NR_IRQS:2304 nr_irqs:256 > Extended CMOS year: 2000 > spurious 8259A interrupt: IRQ7. > Console: colour dummy device 80x25 > console [tty0] enabled > Fast TSC calibration using PIT > Detected 2511.710 MHz processor. > Calibrating delay loop (skipped), value calculated using timer > frequency.. 5023.42 BogoMIPS (lpj=2511710) > Security Framework initialized > Mount-cache hash table entries: 512 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > mce: CPU supports 5 MCE banks > using C1E aware idle routine > Performance Events: AMD PMU driver. > ... version: 0 > ... bit width: 48 > ... generic registers: 4 > ... value mask: 0000ffffffffffff > ... max period: 00007fffffffffff > ... fixed-purpose events: 0 > ... event mask: 000000000000000f > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 41k freed > weird, boot CPU (#0) not listed by the BIOS. > SMP motherboard not detected. > Mapping cpu 0 to node 0 > Apic disabled > Local APIC not detected. Using dummy APIC emulation. > SMP disabled > Mapping cpu 0 to node 0 > Brought up 1 CPUs > Total of 1 processors activated (5023.42 BogoMIPS). > devtmpfs: initialized > xor: automatically using best checksumming function: pIII_sse > pIII_sse : 6784.000 MB/sec > xor: using function: pIII_sse (6784.000 MB/sec) > regulator: core version 0.5 > NET: Registered protocol family 16 > EISA bus registered > PCI: PCI BIOS revision 3.00 entry at 0xf1e10, last bus=4 > PCI: Using configuration type 1 for base access > bio: create slab at 0 > ACPI: Interpreter disabled. > vgaarb: loaded > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > raid6: int32x1 640 MB/s > raid6: int32x2 863 MB/s > raid6: int32x4 730 MB/s > raid6: int32x8 554 MB/s > raid6: mmxx1 2050 MB/s > raid6: mmxx2 3722 MB/s > raid6: sse1x1 1949 MB/s > raid6: sse1x2 3285 MB/s > raid6: sse2x1 3347 MB/s > raid6: sse2x2 4332 MB/s > raid6: using algorithm sse2x2 (4332 MB/s) > PCI: Probing PCI hardware > PCI: Probing PCI hardware (bus 00) > pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f] > pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] > pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] > pci 0000:00:01.1: PME# supported from D3hot D3cold > pci 0000:00:01.1: PME# disabled > pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] > pci 0000:00:02.0: supports D1 D2 > pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:02.0: PME# disabled > pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] > pci 0000:00:02.1: supports D1 D2 > pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:02.1: PME# disabled > pci 0000:00:05.0: reg 10 32bit mmio: [0xfe024000-0xfe027fff] > pci 0000:00:05.0: PME# supported from D3hot D3cold > pci 0000:00:05.0: PME# disabled > pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] > pci 0000:00:07.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] > pci 0000:00:07.0: reg 14 io port: [0xec00-0xec07] > pci 0000:00:07.0: supports D1 D2 > pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:07.0: PME# disabled > pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7] > pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3] > pci 0000:00:08.0: reg 18 io port: [0x970-0x977] > pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73] > pci 0000:00:08.0: reg 20 io port: [0xd800-0xd80f] > pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] > pci 0000:00:08.1: reg 10 io port: [0x9e0-0x9e7] > pci 0000:00:08.1: reg 14 io port: [0xbe0-0xbe3] > pci 0000:00:08.1: reg 18 io port: [0x960-0x967] > pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63] > pci 0000:00:08.1: reg 20 io port: [0xc400-0xc40f] > pci 0000:00:08.1: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] > pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:09.0: PME# disabled > pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0b.0: PME# disabled > pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0c.0: PME# disabled > pci 0000:01:08.0: reg 10 io port: [0xbc00-0xbcff] > pci 0000:01:08.0: reg 14 32bit mmio: [0x000000-0x0000ff] > pci 0000:01:08.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] > pci 0000:00:04.0: transparent bridge > pci 0000:00:04.0: bridge io port: [0xb000-0xbfff] > pci 0000:00:04.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] > pci 0000:00:04.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff] > pci 0000:02:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff] > pci 0000:02:00.0: reg 18 64bit mmio: [0xfddf0000-0xfddfffff] > pci 0000:02:00.0: reg 20 io port: [0xac00-0xacff] > pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfddc0000-0xfdddffff] > pci 0000:02:00.0: supports D1 D2 > pci 0000:02:00.1: reg 10 64bit mmio: [0xfdde0000-0xfddeffff] > pci 0000:02:00.1: supports D1 D2 > pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can > enable it with 'pcie_aspm=force' > pci 0000:00:09.0: bridge io port: [0xa000-0xafff] > pci 0000:00:09.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] > pci 0000:00:09.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] > pci 0000:03:00.0: reg 24 32bit mmio: [0xfdcfe000-0xfdcfffff] > pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfdce0000-0xfdceffff] > pci 0000:03:00.0: PME# supported from D3hot > pci 0000:03:00.0: PME# disabled > pci 0000:03:00.1: reg 10 io port: [0x9c00-0x9c07] > pci 0000:03:00.1: reg 14 io port: [0x9800-0x9803] > pci 0000:03:00.1: reg 18 io port: [0x9400-0x9407] > pci 0000:03:00.1: reg 1c io port: [0x9000-0x9003] > pci 0000:03:00.1: reg 20 io port: [0x8c00-0x8c0f] > pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can > enable it with 'pcie_aspm=force' > pci 0000:00:0b.0: bridge io port: [0x8000-0x9fff] > pci 0000:00:0b.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] > pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] > pci 0000:00:0c.0: bridge io port: [0x7000-0x7fff] > pci 0000:00:0c.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] > pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] > vgaarb: device added: > PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none > pci 0000:00:00.0: default IRQ router [10de:03ea] > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > Switching to clocksource tsc > Slow work thread pool: Starting up > Slow work thread pool: Ready > FS-Cache: Loaded > CacheFiles: Loaded > pnp: PnP ACPI: disabled > PnPBIOS: Scanning system for PnP BIOS support... > PnPBIOS: Found PnP BIOS installation structure at 0xc00fc6b0 > PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc6e0, dseg 0xf0000 > PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver > system 00:07: iomem range 0x0-0x9ffff could not be reserved > system 00:07: iomem range 0xfffffffffffe0000-0xffffffffffffffff has > been reserved > system 00:07: iomem range 0xfffffffffec00000-0xfffffffffec0ffff has > been reserved > system 00:07: iomem range 0xfffffffffee00000-0xfffffffffeefffff has > been reserved > system 00:07: iomem range 0xfffffffffefff000-0xfffffffffefff3ff has > been reserved > system 00:07: iomem range 0x100000-0xffffff could not be reserved > system 00:08: iomem range 0xf0000-0xf3fff could not be reserved > system 00:08: iomem range 0xf4000-0xf7fff could not be reserved > system 00:08: iomem range 0xf8000-0xfffff could not be reserved > system 00:08: iomem range 0xd2800-0xd3fff has been reserved > pci 0000:01:08.0: BAR 1: error updating (0xfdf00000 != 0xf9f00000) > pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:04.0: IO window: 0xb000-0xbfff > pci 0000:00:04.0: MEM window: 0xfdf00000-0xfdffffff > pci 0000:00:04.0: PREFETCH window: 0xfde00000-0xfdefffff > pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:09.0: IO window: 0xa000-0xafff > pci 0000:00:09.0: MEM window: 0xfdd00000-0xfddfffff > pci 0000:00:09.0: PREFETCH window: > 0x000000e0000000-0x000000efffffff > pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 > pci 0000:00:0b.0: IO window: 0x8000-0x9fff > pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff > pci 0000:00:0b.0: PREFETCH window: > 0x000000fdb00000-0x000000fdbfffff > pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 > pci 0000:00:0c.0: IO window: 0x7000-0x7fff > pci 0000:00:0c.0: MEM window: 0xfda00000-0xfdafffff > pci 0000:00:0c.0: PREFETCH window: > 0x000000fd900000-0x000000fd9fffff > pci 0000:00:04.0: setting latency timer to 64 > pci 0000:00:09.0: setting latency timer to 64 > pci 0000:00:0b.0: setting latency timer to 64 > pci 0000:00:0c.0: setting latency timer to 64 > pci_bus 0000:00: resource 0 io: [0x00-0xffff] > pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] > pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] > pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff] > pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff] > pci_bus 0000:01: resource 3 io: [0x00-0xffff] > pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] > pci_bus 0000:02: resource 0 io: [0xa000-0xafff] > pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] > pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] > pci_bus 0000:03: resource 0 io: [0x8000-0x9fff] > pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] > pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] > pci_bus 0000:04: resource 0 io: [0x7000-0x7fff] > pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff] > pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > pci 0000:02:00.0: Boot video device > Machine check injector initialized > elanfreq: error: no Elan processor found! > cpufreq-nforce2: No nForce2 chipset. > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) > scx200: NatSemi SCx200 Driver > microcode: CPU0: AMD CPU family 0xf not supported > Microcode Update Driver: v2.00 , Peter > Oruba > Scanning for low memory corruption every 60 seconds > audit: initializing netlink socket (disabled) > type=2000 audit(1259814914.268:1): initialized > highmem bounce pool size: 64 pages > HugeTLB registered 2 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > DLM (built Dec 3 2009 03:09:28) installed > squashfs: version 4.0 (2009/01/31) Phillip Lougher > FS-Cache: Netfs 'nfs' registered for caching > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > NTFS driver 2.1.29 [Flags: R/W]. > EFS: 1.0a - http://aeschi.ch.eu.org/efs/ > JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. > ROMFS MTD (C) 2007 Red Hat, Inc. > QNX4 filesystem 0.2.3 registered. > fuse init (API version 7.13) > JFS: nTxBlock = 8192, nTxLock = 65536 > SGI XFS with ACLs, security attributes, realtime, large block/inode > numbers, no debug enabled > SGI XFS Quota Management subsystem > BeFS version: 0.9.3 > OCFS2 1.5.0 > ocfs2: Registered cluster interface o2cb > ocfs2: Registered cluster interface user > OCFS2 Node Manager 1.5.0 > OCFS2 DLM 1.5.0 > OCFS2 DLMFS 1.5.0 > OCFS2 User DLM kernel interface loaded > Btrfs loaded > GFS2 (built Dec 3 2009 03:11:14) installed > msgmni has been set to 1588 > alg: No test for cipher_null (cipher_null-generic) > alg: No test for ecb(cipher_null) (ecb-cipher_null) > alg: No test for digest_null (digest_null-generic) > alg: No test for compress_null (compress_null-generic) > alg: No test for fcrypt (fcrypt-generic) > alg: No test for stdrng (krng) > async_tx: api initialized (async) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 > ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed > cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 > cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: > 0.1 > cpcihp_generic: not configured, disabling. > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > mdacon: MDA with 8K of memory detected. > Console: switching consoles 13-16 to MDA-2 > VIA Graphics Intergration Chipset framebuffer 2.4 initializing > vmlfb: initializing > Could not find Carillo Ranch MCH device. > no IO addresses supplied > hgafb: HGA card not detected. > hgafb: probe of hgafb.0 failed with error -22 > uvesafb: failed to execute /sbin/v86d > uvesafb: make sure that the v86d helper is installed and executable > uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) > uvesafb: vbe_init() failed with -22 > uvesafb: probe of uvesafb.0 failed with error -22 > vesafb: framebuffer at 0xe0000000, mapped to 0xf8580000, using > 3072k, total 16384k > vesafb: mode is 1024x768x16, linelength=2048, pages=9 > vesafb: protected mode interface info at c000:a2da > vesafb: pmi: set display start = c00ca362, set palette = c00ca41e > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > vga16fb: initializing > vga16fb: mapped to 0xc00a0000 > fb1: VGA16 VGA frame buffer device > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Non-volatile memory driver v1.3 > toshiba: not a supported Toshiba laptop > Linux agpgart interface v0.103 > [drm] Initialized drm 1.1.0 20060810 > [drm] radeon defaulting to userspace modesetting. > pci 0000:02:00.0: setting latency timer to 64 > [drm] Initialized radeon 1.31.0 20080528 for 0000:02:00.0 on minor 0 > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > parport_pc 00:0d: reported by Plug and Play BIOS > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > floppy0: no floppy controllers found > brd: module loaded > loop: module loaded > ------------[ cut here ]------------ > WARNING: at mm/page_alloc.c:1805 > __alloc_pages_nodemask+0x127/0x48f() > Hardware name: System Product Name > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.32-rc8-git5 #1 > Call Trace: > [] warn_slowpath_common+0x65/0x95 > [] warn_slowpath_null+0x12/0x15 > [] __alloc_pages_nodemask+0x127/0x48f > [] ? get_slab+0x8/0x50 > [] alloc_page_interleave+0x2e/0x6e > [] alloc_pages_current+0x57/0x99 > [] ? xd_init+0x0/0x482 > [] __get_free_pages+0xd/0x1e > [] xd_init+0x4a/0x482 > [] ? loop_init+0x104/0x16a > [] ? loop_probe+0x0/0xaf > [] ? xd_init+0x0/0x482 > [] do_one_initcall+0x51/0x13f > [] kernel_init+0x10b/0x15f > [] ? kernel_init+0x0/0x15f > [] kernel_thread_helper+0x7/0x10 > ---[ end trace 686db6333ade6e7a ]--- > xd: Out of memory. > Compaq SMART2 Driver (v 2.6.0) > HP CISS Driver (v 3.6.20) > MM: desc_per_page = 128 > nbd: registered device at major 43 > usbcore: registered new interface driver ub > ibmasm: IBM ASM Service Processor Driver version 1.0 loaded > Phantom Linux Driver, version n0.9.8, init OK > Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti > c2port c2port0: C2 port uc added > c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes > total) > input: Macintosh mouse button emulation as > /devices/virtual/input/input0 > Uniform Multi-Platform E-IDE driver > amd74xx 0000:00:06.0: UDMA133 controller > amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2) > amd74xx 0000:00:06.0: IDE port disabled > amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling > workaround. > amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xf000-0xf007 > Probing IDE interface ide0... > hda: Hitachi HDT725050VLAT80, ATA DISK drive > hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/133 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x03) > JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001) > JMicron IDE 0000:03:00.1: can't find IRQ for PCI INT B; please try > using pci=biosirq > jmicron 0000:03:00.1: bad irq (0): will probe later > JMicron IDE 0000:03:00.1: setting latency timer to 64 > ide1: BM-DMA at 0x8c00-0x8c07 > ide2: BM-DMA at 0x8c08-0x8c0f > Probing IDE interface ide1... > Probing IDE interface ide2... > ide1: disabled, no IRQ > ide1: failed to initialize IDE interface > ide1: disabling port > ide2: disabled, no IRQ > ide2: failed to initialize IDE interface > ide2: disabling port > JMicron IDE: probe of 0000:03:00.1 failed with error -1 > ide_generic: please use "probe_mask=0x3f" module parameter for > probing all legacy ISA IDE ports > ide-gd driver 1.18 > hda: max request size: 512KiB > hda: 976773168 sectors (500107 MB) w/7372KiB Cache, CHS=60801/255/63 > hda: cache flushes supported > hda: hda2 hda3 hda4 > ide-cd driver 5.00 > Loading iSCSI transport class v2.0-870. > rdac: device handler registered > hp_sw: device handler registered > emc: device handler registered > alua: device handler registered > fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121 > iscsi: registered transport (tcp) > Loading Adaptec I2O RAID: Version 2.4 Build 5go > Detecting Adaptec I2O RAID controllers... > Adaptec aacraid driver 1.1-5[2461]-ms > aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded > scsi: Detection failed (no card) > NCR53c406a: no available ports found > sym53c416.c: Version 1.0.0-ac > qlogicfas: no cards were found, please specify I/O address and IRQ > using iobase= and irq= options > QLogic Fibre Channel HBA Driver: 8.03.01-k6 > iscsi: registered transport (qla4xxx) > QLogic iSCSI HBA Driver > Emulex LightPulse Fibre Channel SCSI driver 8.3.4 > Copyright(c) 2004-2009 Emulex. All rights reserved. > Brocade BFA FC/FCOE SCSI driver - version: 2.0.0.0 > Failed initialization of WD-7000 SCSI card! > DC390: clustering now enabled by default. If you get problems load > with "disable_clustering=1" and report to maintainers > megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) > megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) > megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 > mpt2sas version 02.100.03.00 loaded > GDT-HA: Storage RAID Controller Driver. Version: 3.05 > 3ware Storage Controller device driver for Linux v1.26.02.002. > 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. > ppa: Version 2.07 (for Linux 2.4.x) > imm: Version 2.05 (for Linux 2.4.0) > nsp32: loading... > ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, > 2009) > RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) > stex: Promise SuperTrak EX Driver version: 4.6.0000.3 > cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. > iscsi: registered transport (cxgb3i) > Broadcom NetXtreme II iSCSI Driver bnx2i v2.0.1e (June 22, 2009) > iscsi: registered transport (bnx2i) > iscsi: registered transport (be2iscsi) > st: Version 20081215, fixed bufsize 32768, s/g segs 256 > osst :I: Tape driver with OnStream support version 0.99.4 > osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ > SCSI Media Changer driver v0.25 > osd: LOADED open-osd 0.1.0 > ahci 0000:03:00.0: version 3.0 > ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl > SATA mode > ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part > ahci 0000:03:00.0: setting latency timer to 64 > scsi2 : ahci > scsi3 : ahci > ata1: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 5 > ata2: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 5 > sata_nv 0000:00:08.0: version 3.5 > sata_nv 0000:00:08.0: setting latency timer to 64 > scsi4 : sata_nv > scsi5 : sata_nv > ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 10 > ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 10 > sata_nv 0000:00:08.1: setting latency timer to 64 > scsi6 : sata_nv > scsi7 : sata_nv > ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 11 > ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 11 > pata_jmicron 0000:03:00.1: BAR 0: can't reserve I/O region > [0x9c00-0x9c07] > pata_jmicron 0000:03:00.1: failed to request/iomap BARs for port 0 > (errno=-16) > pata_jmicron 0000:03:00.1: BAR 2: can't reserve I/O region > [0x9400-0x9407] > pata_jmicron 0000:03:00.1: failed to request/iomap BARs for port 1 > (errno=-16) > pata_jmicron 0000:03:00.1: no available native port > Error: Driver 'pata_platform' is already registered, aborting... > pata_acpi 0000:03:00.1: BAR 0: can't reserve I/O region > [0x9c00-0x9c07] > pata_acpi 0000:03:00.1: failed to request/iomap BARs for port 0 > (errno=-16) > pata_acpi 0000:03:00.1: BAR 2: can't reserve I/O region > [0x9400-0x9407] > pata_acpi 0000:03:00.1: failed to request/iomap BARs for port 1 > (errno=-16) > pata_acpi 0000:03:00.1: no available native port > SSFDC read-only Flash Translation layer > L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot > continue > device id = 2440 > device id = 2480 > device id = 24c0 > device id = 24d0 > device id = 25a1 > device id = 2670 > physmap-flash.0: failed to claim resource 0 > SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff > Could not find PAR responsible for SC520CDP Flash Bank #0 > Trying default address 0x8400000 > Could not find PAR responsible for SC520CDP Flash Bank #1 > Trying default address 0x8c00000 > Could not find PAR responsible for SC520CDP DIL Flash > Trying default address 0x9400000 > SC520 CDP flash device: 0x800000 at 0x8400000 > Failed to ioremap_nocache > NetSc520 flash device: 0x100000 at 0x200000 > Failed to ioremap_nocache > Failed to ioremap_nocache > scx200_docflash: NatSemi SCx200 DOCCS Flash Driver > SNAPGEAR: failed to ioremap() BOOTCS > Generic platform RAM MTD, (c) 2004 Simtec Electronics > No recognised DiskOnChip devices found > slram: not enough parameters. > Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel > Networks. > pmc551: not detected > ftl_cs: FTL header not found. > No valid DiskOnChip devices found > NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 8MiB > 1,8V 8-bit) > flash size: 8 MiB > page size: 512 bytes > OOB area size: 16 bytes > sector size: 8 KiB > pages number: 16384 > pages per sector: 16 > bus width: 8 > bits in sector size: 13 > bits in page size: 9 > bits in OOB size: 4 > flash size with OOB: 8448 KiB > page address bytes: 3 > sector address bytes: 2 > options: 0x62 > Scanning device for bad blocks > Creating 1 MTD partitions on "NAND 8MiB 1,8V 8-bit": > 0x000000000000-0x000000800000 : "NAND simulator partition 0" > ftl_cs: FTL header not found. > usbcore: registered new interface driver alauda > OneNAND Manufacturer: Samsung (0xec) > OneNAND 16MB 1.8V 16-bit (0x04) > OneNAND version = 0x001e > Lock scheme is Continuous Lock > Scanning device for bad blocks > Creating 1 MTD partitions on "OneNAND simulator": > 0x000000000000-0x000001000000 : "OneNAND simulator partition" > ftl_cs: FTL header not found. > Fixed MDIO Bus: probed > Atheros(R) L2 Ethernet Driver - version 2.2.3 > Copyright (c) 2007 Atheros Corporation. > e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > Broadcom NetXtreme II CNIC Driver cnic v2.0.1 (Oct 01, 2009) > D-Link DE-620 pocket adapter io 0x378, which is busy. > PPP generic driver version 2.4.2 > PPP Deflate Compression module registered > PPP BSD Compression module registered > PPP MPPE Compression module registered > NET: Registered protocol family 24 > PPPoL2TP kernel driver, V1.0 > SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 > bit encapsulation enabled). > CSLIP: code copyright 1989 Regents of the University of California. > SLIP linefill/keepalive option. > DE600: port 0x378 busy > atp.c:v1.09=ac 2002/10/01 Donald Becker > I2O subsystem v1.325 > i2o: max drivers = 8 > I2O Configuration OSM v1.323 > I2O Bus Adapter OSM v1.317 > I2O Block Device OSM v1.325 > I2O SCSI Peripheral OSM v1.316 > I2O ProcFS OSM v1.316 > Fusion MPT base driver 3.04.12 > Copyright (c) 1999-2008 LSI Corporation > Fusion MPT SPI Host driver 3.04.12 > Fusion MPT FC Host driver 3.04.12 > Fusion MPT SAS Host driver 3.04.12 > Fusion MPT misc device (ioctl) driver 3.04.12 > mptctl: Registered with Fusion MPT base driver > mptctl: /dev/mptctl @ (major,minor=10,220) > Fusion MPT LAN driver 3.04.12 > video1394: Installed video1394 module > ieee1394: raw1394: /dev/raw1394 device initialized > Intel ISA PCIC probe: not found. > Databook TCIC-2 PCMCIA probe: not found. > aoe: AoE v47 initialised. > paride: aten registered as protocol 0 > paride: bpck registered as protocol 1 > paride: comm registered as protocol 2 > paride: dstr registered as protocol 3 > paride: k951 registered as protocol 4 > paride: k971 registered as protocol 5 > paride: epat registered as protocol 6 > paride: epia registered as protocol 7 > paride: frpw registered as protocol 8 > paride: friq registered as protocol 9 > paride: fit2 registered as protocol 10 > paride: fit3 registered as protocol 11 > paride: on20 registered as protocol 12 > paride: on26 registered as protocol 13 > paride: ktti registered as protocol 14 > bpck6: BACKPACK Protocol Driver V2.0.2 > bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA > paride: bpck6 registered as protocol 15 > pd: pd version 1.05, major 45, cluster 64, nice 0 > Clocksource tsc unstable (delta = 479803194 ns) > pda: Autoprobe failed > pd: no valid drive found > pcd: pcd version 1.07, major 46, nice 0 > pcd0: Autoprobe failed > pcd: No CD-ROM drive found > pf: pf version 1.04, major 47, cluster 64, nice 0 > pf: No ATAPI disk detected > pt: pt version 1.04, major 96 > pt0: Autoprobe failed > pt: No ATAPI tape drive detected > pg: pg version 1.02, major 97 > pga: Autoprobe failed > pg: No ATAPI device detected > Switching to clocksource pit > usbcore: registered new interface driver hwa-rc > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:02.1: setting latency timer to 64 > ehci_hcd 0000:00:02.1: EHCI Host Controller > ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:02.1: debug port 1 > ehci_hcd 0000:00:02.1: cache line size of 64 is not supported > ehci_hcd 0000:00:02.1: irq 10, io mem 0xfe02e000 > ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.32-rc8-git5 ehci_hcd > usb usb1: SerialNumber: 0000:00:02.1 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 10 ports detected > 116x: driver isp116x-hcd, 03 Nov 2005 > driver isp1362-hcd, 2005-04-04 > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ohci_hcd 0000:00:02.0: setting latency timer to 64 > ohci_hcd 0000:00:02.0: OHCI Host Controller > ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:02.0: irq 5, io mem 0xfe02f000 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: OHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.32-rc8-git5 ohci_hcd > usb usb2: SerialNumber: 0000:00:02.0 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 10 ports detected > uhci_hcd: USB Universal Host Controller Interface driver > sl811: driver sl811-hcd, 19 May 2005 > r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 > usbcore: registered new interface driver hwa-hc > usbcore: registered new interface driver wusb-cbaf > usbcore: registered new interface driver cdc_acm > cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and > ISDN adapters > usbcore: registered new interface driver usblp > usbcore: registered new interface driver cdc_wdm > Initializing USB Mass Storage driver... > ata5: SATA link down (SStatus 0 SControl 300) > ata1: SATA link down (SStatus 0 SControl 300) > ata2: SATA link down (SStatus 0 SControl 300) > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > usbcore: registered new interface driver ums-alauda > usbcore: registered new interface driver ums-cypress > usbcore: registered new interface driver ums-datafab > usbcore: registered new interface driver ums-freecom > usbcore: registered new interface driver ums-isd200 > usbcore: registered new interface driver ums-jumpshot > usbcore: registered new interface driver ums-karma > usbcore: registered new interface driver ums-onetouch > usbcore: registered new interface driver ums-sddr09 > usbcore: registered new interface driver ums-sddr55 > usbcore: registered new interface driver ums-usbat > PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 > PNP: PS/2 appears to have AUX port disabled, if this is incorrect > please boot with i8042.nopnp > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: PARKBD AT adapter on parport0 > mice: PS/2 mouse device common for all mice > usbcore: registered new interface driver appletouch > usbcore: registered new interface driver bcm5974 > inport.c: Didn't find InPort mouse at 0x23c > logibm.c: Didn't find Logitech busmouse at 0x23c > usbcore: registered new interface driver usb_acecad > acecad: v3.2:USB Acecad Flair tablet driver > usbcore: registered new interface driver aiptek > aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux > 2.6.x) > aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen > usbcore: registered new interface driver gtco > GTCO usb driver version: 2.00.0006 > usbcore: registered new interface driver kbtab > kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver > usbcore: registered new interface driver wacom > wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver > input: PC Speaker as /devices/platform/pcspkr/input/input1 > i2c /dev entries driver > input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input2 > Linux video capture interface: v2.00 > usbcore: registered new interface driver dabusb > dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999 > md: linear personality registered for level -1 > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > md: raid10 personality registered for level 10 > md: raid6 personality registered for level 6 > md: raid5 personality registered for level 5 > md: raid4 personality registered for level 4 > md: multipath personality registered for level -4 > md: faulty personality registered for level -5 > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: > dm-devel@redhat.com > device-mapper: multipath: version 1.1.0 loaded > device-mapper: multipath round-robin: version 1.0.0 loaded > EDAC MC: Ver: 2.1.0 Dec 3 2009 > EISA: Probing bus 0 at eisa.0 > Cannot allocate resource for EISA slot 1 > Cannot allocate resource for EISA slot 7 > Cannot allocate resource for EISA slot 8 > EISA: Detected 0 cards. > cpuidle: using governor ladder > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > ricoh-mmc: Ricoh MMC Controller disabling driver > ricoh-mmc: Copyright(c) Philip Langdale > wbsd: Winbond W83L51xD SD/MMC card interface driver > wbsd: Copyright(c) Pierre Ossman > via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, > Inc. > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > dell-wmi: No known WMI GUID found > oprofile: using timer interrupt. > TCP cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 17 > NET: Registered protocol family 33 > lib80211: common routines for IEEE802.11 drivers > lib80211_crypt: registered algorithm 'NULL' > lib80211_crypt: registered algorithm 'WEP' > lib80211_crypt: registered algorithm 'CCMP' > lib80211_crypt: registered algorithm 'TKIP' > powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ > processors (1 cpu cores) (version 2.20.00) > [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects > Using IPI No-Shortcut mode > ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01104, max UDMA7 > ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata3.00: configured for UDMA/133 > scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 > ANSI: 5 > sd 4:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 > GiB) > sd 4:0:0:0: [sda] Write Protect is off > sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: > sd 4:0:0:0: Attached scsi generic sg0 type 0 > sda1 sda3 sda4 > sd 4:0:0:0: [sda] Attached SCSI disk > usb 1-5: new high speed USB device using ehci_hcd and address 4 > usb 1-5: New USB device found, idVendor=0bda, idProduct=8187 > usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 1-5: Product: RTL8187_Wireless > usb 1-5: Manufacturer: Manufacturer_Realtek_RTL8187_ > usb 1-5: SerialNumber: 0015AF2347F2 > usb 1-5: configuration #1 chosen from 1 choice > ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-H66N, CB00, max UDMA/100 > ata4.00: configured for UDMA/100 > scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H66N CB00 PQ: 0 > ANSI: 5 > sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda > tray > Uniform CD-ROM driver Revision: 3.20 > sr 5:0:0:0: Attached scsi CD-ROM sr0 > sr 5:0:0:0: Attached scsi generic sg1 type 5 > usb 2-2: new full speed USB device using ohci_hcd and address 2 > usb 2-2: device descriptor read/64, error -62 > ata6: SATA link down (SStatus 0 SControl 300) > kAFS: Red Hat AFS client v0.1 registering. > raid6test: testing the 4-disk case... > raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK > raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK > raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK > raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK > raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK > raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK > raid6test: testing the 5-disk case... > raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK > raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK > raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK > raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK > raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK > raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK > raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK > raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK > raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK > raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK > raid6test: testing the 16-disk case... > raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK > raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK > raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK > raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK > raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK > raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK > raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK > raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK > raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK > raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK > raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK > raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK > raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK > raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK > raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK > raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK > raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK > raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK > raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK > raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK > raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK > raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK > raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK > raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK > raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK > raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK > raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK > raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK > raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK > raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK > raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK > raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK > raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK > raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK > raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK > raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK > raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK > raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK > raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK > raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK > raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK > raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK > raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK > raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK > raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK > raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK > raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK > raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK > raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK > raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK > raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK > raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK > raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK > raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK > raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK > raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK > raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK > raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK > raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK > raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK > raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK > raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK > raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK > raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK > raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK > raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK > raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK > raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK > raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK > raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK > raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK > raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK > raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK > raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK > raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK > raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK > raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK > raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK > raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK > raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK > raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK > raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK > raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK > raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK > raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK > raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK > raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK > raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK > raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK > raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK > raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK > raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK > raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK > raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK > raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK > raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK > raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK > raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK > raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK > raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK > raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK > raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK > raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK > raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK > raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK > raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK > raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK > raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK > raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK > raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK > raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK > raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK > raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK > raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK > raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK > raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK > raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK > raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK > raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK > raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK > raid6test: > raid6test: complete (136 tests, 0 failures) > register_blkdev: cannot get major 3 for hd > BIOS EDD facility v0.16 2004-Jun-25, 2 devices found > md: Waiting for all devices to be available before autodetect > md: If you don't use raid, use raid=noautodetect > md: Autodetecting RAID arrays. > md: Scanned 0 and added 0 devices. > md: autorun ... > md: ... autorun DONE. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly on device 8:1. > usb 2-2: device descriptor read/64, error -62 > devtmpfs: mounted > Freeing unused kernel memory: 852k freed > usb 2-2: new full speed USB device using ohci_hcd and address 3 > usb 2-2: device descriptor read/64, error -62 > usb 2-2: device descriptor read/64, error -62 > usb 2-2: new full speed USB device using ohci_hcd and address 4 > usb 2-2: device not accepting address 4, error -62 > usb 2-2: new full speed USB device using ohci_hcd and address 5 > usb 2-2: device not accepting address 5, error -62 > hub 2-0:1.0: unable to enumerate USB device on port 2 > usb 2-4: new low speed USB device using ohci_hcd and address 6 > usb 2-4: New USB device found, idVendor=05e3, idProduct=1205 > usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > usb 2-4: Product: USB Mouse > usb 2-4: configuration #1 chosen from 1 choice > input: USB Mouse as > /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3 > generic-usb 0003:05E3:1205.0001: input,hidraw0: USB HID v1.10 Mouse > [USB Mouse ] on usb-0000:00:02.0-4/input0 > forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. > forcedeth 0000:00:07.0: setting latency timer to 64 > forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr > 00:1d:60:19:59:cc > forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 > i2c i2c-0: nForce2 SMBus adapter at 0x1c00 > i2c i2c-1: nForce2 SMBus adapter at 0x1c40 > k8temp 0000:00:18.3: Temperature readouts might be wrong - check > erratum #141 > 8139too Fast Ethernet driver 0.9.28 > 8139too 0000:01:08.0: Chip not responding, ignoring board > 8139too: probe of 0000:01:08.0 failed with error -5 > cfg80211: Using static regulatory domain info > cfg80211: Regulatory domain: US > (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) > (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) > cfg80211: Calling CRDA for country: US > Driver 'rtc_cmos' needs updating - please use bus_type methods > rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one day, 114 bytes nvram > HDA Intel 0000:00:05.0: setting latency timer to 64 > phy0: Selected rate control algorithm 'minstrel' > phy0: hwaddr 00:15:af:23:47:f2, RTL8187vB (default) V1 + rtl8225z2 > rtl8187: Customer ID is 0x00 > Registered led device: rtl8187-phy0::tx > Registered led device: rtl8187-phy0::rx > rtl8187: wireless switch is on > usbcore: registered new interface driver rtl8187 > hda_codec: AD1988: BIOS auto-probing. > input: HDA Digital PCBeep as > /devices/pci0000:00/0000:00:05.0/input/input4 > EXT3 FS on sda1, internal journal > parport0: no more devices allowed > lp: driver loaded but no devices found > usbcore: registered new interface driver uvcvideo > USB Video Class driver (v0.1.0) > rt2860sta: module is from the staging directory, the quality is > unknown, you have been warned. > usbcore: registered new interface driver snd-usb-audio > --- > Professional hosting for everyone - http://www.host.ru > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/