Date: Mon, 7 Dec 2009 19:39:46 +0100
From: Jens Axboe <jens.axboe@oracle.com>
To: Ozan =?iso-8859-1?B?x2E/P2xheWFu?= <ozan@pardus.org.tr>
Cc: "Miller, Mike (OS Dev)" <Mike.Miller@hp.com>,
       linux-kernel <linux-kernel@vger.kernel.org>,
       "scameron@beardog.cce.hp.com" <scameron@beardog.cce.hp.com>
Subject: Re: CCISS performance drop in buffered disk reads in newer kernels
Message-ID: <20091207183946.GE8742@kernel.dk>
References: <4B1CDCE6.5040502@pardus.org.tr> <0F5B06BAB751E047AB5C87D1F77A778869941207A5@GVW0547EXC.americas.hpqcorp.net> <4B1D47C5.7030804@pardus.org.tr>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <4B1D47C5.7030804@pardus.org.tr>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1846
Lines: 45

On Mon, Dec 07 2009, Ozan ?a??layan wrote:
> Miller, Mike (OS Dev) wrote:
> > Ozan,
> > I'm aware of the performance drop. Please see: http://bugzilla.kernel.org/show_bug.cgi?id=13127. I removed the huge read ahead value of 1024 that we used because users were complaining about small writes being starved. That was back around the 2.6.25 timeframe. Since that timeframe there have no changes in the main i/o path. I'll get back on this as time allows.
> >
> > Meanwhile, you can tweak some of the block layer tunables as such.
> >
> >     echo 64 > /sys/block/cciss\!c0d1/queue/read_ahead_kb
> > OR
> >     blockdev --setra 128 /dev/cciss/c0d1
> >
> > These are just example values. There is also max_hw_sectors_kb and max_sectors_kb that be adjusted.
> >   
> 
> Hi,
> 
> Actually the "#define READ_AHEAD 1024" was removed on March 2008 which
> was included in the 2.6.25.y tree so 2.6.25.20 has 128kB read_ahead
> value too.
> 
> *But* setting read_ahead to 2048 increases buffered disk read average
> from 60~MB/s to 190~MB/s hence the kernel compile time drops to 2 minutes.
> 
> So maybe the regression/change is in another place?
> 
> The server is just a compile-farm so it's triggered by hand, compiles
> distribution's packages and stays idle until the next compilation queue.
> Is it safe/OK to use that 2048kB read_ahead value for such workload?

Yes, it's definitely safe.

> (max_hw_sectors_kb is 512 on my 2.6.25.20 setup and 1024 on 2.6.30.9 but
> it seems that it's read-only)

The *_hw_* values are the driver exported hardware limits, so they are
always read-only.

-- 
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/