Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758681AbZLIXRr (ORCPT ); Wed, 9 Dec 2009 18:17:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758665AbZLIXRl (ORCPT ); Wed, 9 Dec 2009 18:17:41 -0500 Received: from ogre.sisk.pl ([217.79.144.158]:55647 "EHLO ogre.sisk.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758626AbZLIXRj (ORCPT ); Wed, 9 Dec 2009 18:17:39 -0500 From: "Rafael J. Wysocki" To: Alan Stern Subject: Async suspend-resume patch w/ completions (was: Re: Async suspend-resume patch w/ rwsems) Date: Thu, 10 Dec 2009 00:18:19 +0100 User-Agent: KMail/1.12.3 (Linux/2.6.32-rjw; KDE/4.3.3; x86_64; ; ) Cc: Linus Torvalds , Zhang Rui , LKML , ACPI Devel Maling List , pm list References: In-Reply-To: MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200912100018.19723.rjw@sisk.pl> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11786 Lines: 433 On Wednesday 09 December 2009, Alan Stern wrote: > On Wed, 9 Dec 2009, Rafael J. Wysocki wrote: > > > On Wednesday 09 December 2009, Alan Stern wrote: > > > On Tue, 8 Dec 2009, Rafael J. Wysocki wrote: > > > > > > > For completness, below is the full async suspend/resume patch with rwlocks, > > > > that has been (very slightly) tested and doesn't seem to break things. > > > > > > > > [Note to Alan: lockdep doesn't seem to complain about the not annotated nested > > > > locks.] > > > > > > I can't imagine why not. And wouldn't lockdep get confused by the fact > > > that in the async case, the rwsems are released by a different process > > > from the one that acquired them? > > > > /me looks at the .config > > > > I have CONFIG_LOCKDEP_SUPPORT set, is there anything else I need to set > > in .config? > > How about CONFIG_PROVE_LOCKING? If lockdep really does start > complaining then switching to completions would be a simple way to > appease it. Ah, that one is not set. I guess I'll try it later, although I've already decided to use completions anyway. ... > > > How about exporting a wait_for_device_to_resume() routine? Drivers > > > could call it for non-tree resume constraints: > > > > > > void wait_for_device_to_resume(struct device *other) > > > { > > > down_read(&other->power.rwsem); > > > up_read(&other->power.rwsem); > > > } > > > > > > Unfortunately there is no equivalent for non-tree suspend constraints. > > > > If we use completions, it will be possible to just export something like > > > > dpm_wait(dev) > > { > > if (dev) > > wait_for_completion(dev->power.completion); > > } > > > > I think. It appears that will also work for suspend, unless I'm missing > > something. > > It will. Completions it is, then. Additionally, I've removed the async support from the _noirq parts and moved the setting of power.status on suspend to __device_suspend(). The result is appended. Rafael --- drivers/base/power/main.c | 124 ++++++++++++++++++++++++++++++++++++++++--- include/linux/device.h | 6 ++ include/linux/pm.h | 12 ++++ include/linux/resume-trace.h | 7 ++ 4 files changed, 143 insertions(+), 6 deletions(-) Index: linux-2.6/include/linux/pm.h =================================================================== --- linux-2.6.orig/include/linux/pm.h +++ linux-2.6/include/linux/pm.h @@ -26,6 +26,7 @@ #include #include #include +#include /* * Callbacks for platform drivers to implement. @@ -412,9 +413,11 @@ struct dev_pm_info { pm_message_t power_state; unsigned int can_wakeup:1; unsigned int should_wakeup:1; + unsigned async_suspend:1; enum dpm_state status; /* Owned by the PM core */ #ifdef CONFIG_PM_SLEEP struct list_head entry; + struct completion completion; #endif #ifdef CONFIG_PM_RUNTIME struct timer_list suspend_timer; @@ -508,6 +511,13 @@ extern void __suspend_report_result(cons __suspend_report_result(__func__, fn, ret); \ } while (0) +extern int __dpm_wait(struct device *dev, void *ign); + +static inline void dpm_wait(struct device *dev) +{ + __dpm_wait(dev, NULL); +} + #else /* !CONFIG_PM_SLEEP */ #define device_pm_lock() do {} while (0) @@ -520,6 +530,8 @@ static inline int dpm_suspend_start(pm_m #define suspend_report_result(fn, ret) do {} while (0) +static inline void dpm_wait(struct device *dev) {} + #endif /* !CONFIG_PM_SLEEP */ /* How to reorder dpm_list after device_move() */ Index: linux-2.6/drivers/base/power/main.c =================================================================== --- linux-2.6.orig/drivers/base/power/main.c +++ linux-2.6/drivers/base/power/main.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "../base.h" #include "power.h" @@ -42,6 +43,7 @@ LIST_HEAD(dpm_list); static DEFINE_MUTEX(dpm_list_mtx); +static pm_message_t pm_transition; /* * Set once the preparation of devices for a PM transition has started, reset @@ -56,6 +58,7 @@ static bool transition_started; void device_pm_init(struct device *dev) { dev->power.status = DPM_ON; + init_completion(&dev->power.completion); pm_runtime_init(dev); } @@ -162,6 +165,39 @@ void device_pm_move_last(struct device * } /** + * __dpm_wait - Wait for a PM operation to complete. + * @dev: Device to wait for. + * @ign: This value is not used by the function. + */ +int __dpm_wait(struct device *dev, void *ign) +{ + if (dev) + wait_for_completion(&dev->power.completion); + return 0; +} +EXPORT_SYMBOL_GPL(__dpm_wait); + +static void dpm_wait_for_children(struct device *dev) +{ + device_for_each_child(dev, NULL, __dpm_wait); +} + +/** + * dpm_synchronize - Wait for PM callbacks of all devices to complete. + */ +static void dpm_synchronize(void) +{ + struct device *dev; + + async_synchronize_full(); + + mutex_lock(&dpm_list_mtx); + list_for_each_entry(dev, &dpm_list, power.entry) + INIT_COMPLETION(dev->power.completion); + mutex_unlock(&dpm_list_mtx); +} + +/** * pm_op - Execute the PM operation appropriate for given PM event. * @dev: Device to handle. * @ops: PM operations to choose from. @@ -381,17 +417,18 @@ void dpm_resume_noirq(pm_message_t state EXPORT_SYMBOL_GPL(dpm_resume_noirq); /** - * device_resume - Execute "resume" callbacks for given device. + * __device_resume - Execute "resume" callbacks for given device. * @dev: Device to handle. * @state: PM transition of the system being carried out. */ -static int device_resume(struct device *dev, pm_message_t state) +static int __device_resume(struct device *dev, pm_message_t state) { int error = 0; TRACE_DEVICE(dev); TRACE_RESUME(0); + dpm_wait(dev->parent); down(&dev->sem); if (dev->bus) { @@ -426,11 +463,34 @@ static int device_resume(struct device * } End: up(&dev->sem); + complete_all(&dev->power.completion); TRACE_RESUME(error); return error; } +static void async_resume(void *data, async_cookie_t cookie) +{ + struct device *dev = (struct device *)data; + int error; + + error = __device_resume(dev, pm_transition); + if (error) + pm_dev_err(dev, pm_transition, " async", error); + put_device(dev); +} + +static int device_resume(struct device *dev) +{ + if (dev->power.async_suspend && !pm_trace_is_enabled()) { + get_device(dev); + async_schedule(async_resume, dev); + return 0; + } + + return __device_resume(dev, pm_transition); +} + /** * dpm_resume - Execute "resume" callbacks for non-sysdev devices. * @state: PM transition of the system being carried out. @@ -444,6 +504,7 @@ static void dpm_resume(pm_message_t stat INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); + pm_transition = state; while (!list_empty(&dpm_list)) { struct device *dev = to_device(dpm_list.next); @@ -454,7 +515,7 @@ static void dpm_resume(pm_message_t stat dev->power.status = DPM_RESUMING; mutex_unlock(&dpm_list_mtx); - error = device_resume(dev, state); + error = device_resume(dev); mutex_lock(&dpm_list_mtx); if (error) @@ -469,6 +530,7 @@ static void dpm_resume(pm_message_t stat } list_splice(&list, &dpm_list); mutex_unlock(&dpm_list_mtx); + dpm_synchronize(); } /** @@ -533,6 +595,8 @@ static void dpm_complete(pm_message_t st mutex_unlock(&dpm_list_mtx); } +static atomic_t async_error; + /** * dpm_resume_end - Execute "resume" callbacks and complete system transition. * @state: PM transition of the system being carried out. @@ -628,10 +692,11 @@ EXPORT_SYMBOL_GPL(dpm_suspend_noirq); * @dev: Device to handle. * @state: PM transition of the system being carried out. */ -static int device_suspend(struct device *dev, pm_message_t state) +static int __device_suspend(struct device *dev, pm_message_t state) { int error = 0; + dpm_wait_for_children(dev); down(&dev->sem); if (dev->class) { @@ -666,12 +731,50 @@ static int device_suspend(struct device suspend_report_result(dev->bus->suspend, error); } } + + if (!error) + dev->power.status = DPM_OFF; + End: up(&dev->sem); + complete_all(&dev->power.completion); return error; } +static void async_suspend(void *data, async_cookie_t cookie) +{ + struct device *dev = (struct device *)data; + int error = atomic_read(&async_error); + + if (error) { + complete_all(&dev->power.completion); + goto End; + } + + error = __device_suspend(dev, pm_transition); + if (error) { + pm_dev_err(dev, pm_transition, " async", error); + atomic_set(&async_error, error); + } + + End: + put_device(dev); +} + +static int device_suspend(struct device *dev, pm_message_t state) +{ + int error; + + if (dev->power.async_suspend) { + get_device(dev); + async_schedule(async_suspend, dev); + return 0; + } + + return __device_suspend(dev, pm_transition); +} + /** * dpm_suspend - Execute "suspend" callbacks for all non-sysdev devices. * @state: PM transition of the system being carried out. @@ -683,6 +786,7 @@ static int dpm_suspend(pm_message_t stat INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); + pm_transition = state; while (!list_empty(&dpm_list)) { struct device *dev = to_device(dpm_list.prev); @@ -697,13 +801,18 @@ static int dpm_suspend(pm_message_t stat put_device(dev); break; } - dev->power.status = DPM_OFF; if (!list_empty(&dev->power.entry)) list_move(&dev->power.entry, &list); put_device(dev); + error = atomic_read(&async_error); + if (error) + break; } list_splice(&list, dpm_list.prev); mutex_unlock(&dpm_list_mtx); + dpm_synchronize(); + if (!error) + error = atomic_read(&async_error); return error; } @@ -762,6 +871,7 @@ static int dpm_prepare(pm_message_t stat INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); transition_started = true; + atomic_set(&async_error, 0); while (!list_empty(&dpm_list)) { struct device *dev = to_device(dpm_list.next); @@ -793,8 +903,10 @@ static int dpm_prepare(pm_message_t stat break; } dev->power.status = DPM_SUSPENDING; - if (!list_empty(&dev->power.entry)) + if (!list_empty(&dev->power.entry)) { list_move_tail(&dev->power.entry, &list); + INIT_COMPLETION(dev->power.completion); + } put_device(dev); } list_splice(&list, &dpm_list); Index: linux-2.6/include/linux/resume-trace.h =================================================================== --- linux-2.6.orig/include/linux/resume-trace.h +++ linux-2.6/include/linux/resume-trace.h @@ -6,6 +6,11 @@ extern int pm_trace_enabled; +static inline int pm_trace_is_enabled(void) +{ + return pm_trace_enabled; +} + struct device; extern void set_trace_device(struct device *); extern void generate_resume_trace(const void *tracedata, unsigned int user); @@ -17,6 +22,8 @@ extern void generate_resume_trace(const #else +static inline int pm_trace_is_enabled(void) { return 0; } + #define TRACE_DEVICE(dev) do { } while (0) #define TRACE_RESUME(dev) do { } while (0) Index: linux-2.6/include/linux/device.h =================================================================== --- linux-2.6.orig/include/linux/device.h +++ linux-2.6/include/linux/device.h @@ -472,6 +472,12 @@ static inline int device_is_registered(s return dev->kobj.state_in_sysfs; } +static inline void device_enable_async_suspend(struct device *dev, bool enable) +{ + if (dev->power.status == DPM_ON) + dev->power.async_suspend = enable; +} + void driver_init(void); /* -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/