Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1762091AbZLKBTi (ORCPT ); Thu, 10 Dec 2009 20:19:38 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758032AbZLKBTh (ORCPT ); Thu, 10 Dec 2009 20:19:37 -0500 Received: from relay1.sgi.com ([192.48.179.29]:42001 "EHLO relay.sgi.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1757420AbZLKBTg (ORCPT ); Thu, 10 Dec 2009 20:19:36 -0500 Message-ID: <4B219E28.8080601@sgi.com> Date: Thu, 10 Dec 2009 17:19:36 -0800 From: Mike Travis User-Agent: Thunderbird 2.0.0.23 (X11/20090817) MIME-Version: 1.0 To: Ingo Molnar CC: Thomas Gleixner , Andrew Morton , Roland Dreier , "H. Peter Anvin" , Jack Steiner , x86@kernel.org, LKML Subject: [PATCH] x86: Limit the number of processor bootup messages Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7818 Lines: 250 x86: Limit the number of processor bootup messages When there are a large number of processors in a system, there is an excessive amount of messages sent to the system console. It's estimated that with 4096 processors in a system, and the console baudrate set to 56K, the startup messages will take about 84 minutes to clear the serial port. This set of patches limits the number of repetitious messages which contain no additional information. Much of this information is obtainable from the /proc and /sysfs. Some of the messages are also sent to the kernel log buffer as KERN_DEBUG messages so dmesg can be used to examine more closely any details specific to a problem. The new cpu bootup sequence for system_state == SYSTEM_BOOTING: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok. ... Booting Node 3, Processors #56 #57 #58 #59 #60 #61 #62 #63 Ok. Brought up 64 CPUs After the system is running, a single line boot message is displayed when CPU's are hotplugged on: Booting Node %d Processor %d APIC 0x%x Status of the following lines: CPU: Physical Processor ID: printed once (for boot cpu) CPU: Processor Core ID: printed once (for boot cpu) CPU: Hyper-Threading is disabled printed once (for boot cpu) CPU: Thermal monitoring enabled printed once (for boot cpu) CPU %d/0x%x -> Node %d: removed CPU %d is now offline: only if system_state == RUNNING Initializing CPU#%d: KERN_DEBUG Signed-off-by: Mike Travis --- arch/x86/kernel/cpu/addon_cpuid_features.c | 15 +++++---- arch/x86/kernel/cpu/amd.c | 2 - arch/x86/kernel/cpu/common.c | 8 +++-- arch/x86/kernel/cpu/intel.c | 2 - arch/x86/kernel/cpu/mcheck/therm_throt.c | 4 +- arch/x86/kernel/smpboot.c | 45 +++++++++++++++++++---------- 6 files changed, 47 insertions(+), 29 deletions(-) --- linux.orig/arch/x86/kernel/cpu/addon_cpuid_features.c +++ linux/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -74,6 +74,7 @@ unsigned int eax, ebx, ecx, edx, sub_index; unsigned int ht_mask_width, core_plus_mask_width; unsigned int core_select_mask, core_level_siblings; + static bool printed; if (c->cpuid_level < 0xb) return; @@ -127,12 +128,14 @@ c->x86_max_cores = (core_level_siblings / smp_num_siblings); - - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - c->phys_proc_id); - if (c->x86_max_cores > 1) - printk(KERN_INFO "CPU: Processor Core ID: %d\n", - c->cpu_core_id); + if (!printed) { + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + if (c->x86_max_cores > 1) + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + printed = 1; + } return; #endif } --- linux.orig/arch/x86/kernel/cpu/amd.c +++ linux/arch/x86/kernel/cpu/amd.c @@ -375,8 +375,6 @@ node = nearby_node(apicid); } numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node); #endif } --- linux.orig/arch/x86/kernel/cpu/common.c +++ linux/arch/x86/kernel/cpu/common.c @@ -427,6 +427,7 @@ #ifdef CONFIG_X86_HT u32 eax, ebx, ecx, edx; int index_msb, core_bits; + static bool printed; if (!cpu_has(c, X86_FEATURE_HT)) return; @@ -442,7 +443,7 @@ smp_num_siblings = (ebx & 0xff0000) >> 16; if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); + printk_once(KERN_INFO "CPU0: Hyper-Threading is disabled\n"); goto out; } @@ -469,11 +470,12 @@ ((1 << core_bits) - 1); out: - if ((c->x86_max_cores * smp_num_siblings) > 1) { + if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) { printk(KERN_INFO "CPU: Physical Processor ID: %d\n", c->phys_proc_id); printk(KERN_INFO "CPU: Processor Core ID: %d\n", c->cpu_core_id); + printed = 1; } #endif } @@ -1115,7 +1117,7 @@ if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask)) panic("CPU#%d already initialized!\n", cpu); - printk(KERN_INFO "Initializing CPU#%d\n", cpu); + pr_debug("Initializing CPU#%d\n", cpu); clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); --- linux.orig/arch/x86/kernel/cpu/intel.c +++ linux/arch/x86/kernel/cpu/intel.c @@ -266,8 +266,6 @@ if (node == NUMA_NO_NODE || !node_online(node)) node = first_node(node_online_map); numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node); #endif } --- linux.orig/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ linux/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -339,8 +339,8 @@ l = apic_read(APIC_LVTTHMR); apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); - printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n", - cpu, tm2 ? "TM2" : "TM1"); + printk_once(KERN_INFO "CPU0: Thermal monitoring enabled (%s)\n", + tm2 ? "TM2" : "TM1"); /* enable thermal throttle processing */ atomic_set(&therm_throt_en, 1); --- linux.orig/arch/x86/kernel/smpboot.c +++ linux/arch/x86/kernel/smpboot.c @@ -671,6 +671,26 @@ complete(&c_idle->done); } +/* reduce the number of lines printed when booting a large cpu count system */ +static void __cpuinit announce_cpu(int cpu, int apicid) +{ + static int current_node = -1; + int node = cpu_to_node(cpu); + + if (system_state == SYSTEM_BOOTING) { + if (node != current_node) { + if (current_node > (-1)) + pr_cont(" Ok.\n"); + current_node = node; + pr_info("Booting Node %3d, Processors ", node); + } + pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " Ok.\n" : ""); + return; + } else + pr_info("Booting Node %d Processor %d APIC 0x%x\n", + node, cpu, apicid); +} + /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad * (ie clustered apic addressing mode), this is a LOGICAL apic ID. @@ -736,9 +756,8 @@ /* start_ip had better be page-aligned! */ start_ip = setup_trampoline(); - /* So we see what's up */ - printk(KERN_INFO "Booting processor %d APIC 0x%x ip 0x%lx\n", - cpu, apicid, start_ip); + /* So we see what's up */ + announce_cpu(cpu, apicid); /* * This grunge runs the startup process for @@ -787,21 +806,17 @@ udelay(100); } - if (cpumask_test_cpu(cpu, cpu_callin_mask)) { - /* number CPUs logically, starting from 1 (BSP is 0) */ - pr_debug("OK.\n"); - printk(KERN_INFO "CPU%d: ", cpu); - print_cpu_info(&cpu_data(cpu)); - pr_debug("CPU has booted.\n"); - } else { + if (cpumask_test_cpu(cpu, cpu_callin_mask)) + pr_debug("CPU%d: has booted.\n", cpu); + else { boot_error = 1; if (*((volatile unsigned char *)trampoline_base) == 0xA5) /* trampoline started but...? */ - printk(KERN_ERR "Stuck ??\n"); + pr_err("CPU%d: Stuck ??\n", cpu); else /* trampoline code not run */ - printk(KERN_ERR "Not responding.\n"); + pr_err("CPU%d: Not responding.\n", cpu); if (apic->inquire_remote_apic) apic->inquire_remote_apic(apicid); } @@ -1291,14 +1306,16 @@ for (i = 0; i < 10; i++) { /* They ack this in play_dead by setting CPU_DEAD */ if (per_cpu(cpu_state, cpu) == CPU_DEAD) { - printk(KERN_INFO "CPU %d is now offline\n", cpu); + if (system_state == SYSTEM_RUNNING) + pr_info("CPU %u is now offline\n", cpu); + if (1 == num_online_cpus()) alternatives_smp_switch(0); return; } msleep(100); } - printk(KERN_ERR "CPU %u didn't die...\n", cpu); + pr_err("CPU %u didn't die...\n", cpu); } void play_dead_common(void) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/