Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 6 Apr 2002 07:25:53 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 6 Apr 2002 07:25:53 -0500 Received: from ookhoi.xs4all.nl ([213.84.114.66]:20141 "EHLO sparsus.humilis.net") by vger.kernel.org with ESMTP id convert rfc822-to-8bit; Sat, 6 Apr 2002 07:25:52 -0500 Date: Sat, 6 Apr 2002 14:25:44 +0200 From: Ookhoi To: linux-kernel@vger.kernel.org Subject: scsi0:0:10:0: Attempting to queue an ABORT message, scsi0:0:10:0: Command not found, aic7xxx_abort returns 0x2002 Message-ID: <20020406142544.F19096@humilis> Reply-To: ookhoi@humilis.net Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: 8BIT User-Agent: Mutt/1.3.19i X-Uptime: 15:47:46 up 41 days, 21:34, 18 users, load average: 0.07, 0.02, 0.00 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi people, dmesg gives a lot of lines like this: scsi0:0:10:0: Attempting to queue an ABORT message scsi0:0:10:0: Command not found aic7xxx_abort returns 0x2002 scsi0:0:10:0: Attempting to queue an ABORT message scsi0:0:10:0: Command not found aic7xxx_abort returns 0x2002 scsi0:0:10:0: Attempting to queue an ABORT message scsi0:0:10:0: Command not found aic7xxx_abort returns 0x2002 We think it is a hardware problem, but I thought it is a good thing to ask here for suggestions. I searched the archives and the web, but could only find similar messages dated last year. I'm happy to provide more info, but hope all below is enough. Thanks in advance for suggestions or hints! Ookhoi kernel 2.4.19-pre2-ac4 asus a7m266-d (amd 760mxp) 00:08.0 SCSI storage controller: Adaptec 7892A (rev 02) /proc/scsi/scsi: Host: scsi0 Channel: 00 Id: 08 Lun: 00 Vendor: QUANTUM Model: ATLAS_V_18_WLS Rev: 0230 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 10 Lun: 00 Vendor: QUANTUM Model: ATLAS_V_18_WLS Rev: 0230 Type: Direct-Access ANSI SCSI revision: 03 /proc/scsi/aic7xxx/0: Adaptec AIC7xxx driver version: 6.2.5 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Channel A Target 0 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 1 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 2 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 3 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 4 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 5 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 6 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 7 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 8 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Goal: 40.000MB/s transfers (20.000MHz, offset 63, 16bit) Curr: 40.000MB/s transfers (20.000MHz, offset 63, 16bit) Channel A Target 8 Lun 0 Settings Commands Queued 652545 Commands Active 1 Command Openings 63 Max Tagged Openings 64 Device Queue Frozen Count 0 Channel A Target 9 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 10 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Goal: 40.000MB/s transfers (20.000MHz, offset 63, 16bit) Curr: 40.000MB/s transfers (20.000MHz, offset 63, 16bit) Channel A Target 10 Lun 0 Settings Commands Queued 605981 Commands Active 0 Command Openings 64 Max Tagged Openings 64 Device Queue Frozen Count 0 Channel A Target 11 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 12 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 13 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 14 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Channel A Target 15 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit) Also in dmesg: scsi0:0:8:0: Attempting to queue an ABORT message scsi0: Dumping Card State while idle, at SEQADDR 0x8 ACCUM = 0x4, SINDEX = 0x64, DINDEX = 0x65, ARG_2 = 0x16 HCNT = 0x0 SCBPTR = 0x7 SCSISEQ = 0x12, SBLKCTL = 0xa DFCNTRL = 0x0, DFSTATUS = 0x89 LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80 SSTAT0 = 0x0, SSTAT1 = 0x8 SCSIPHASE = 0x0 STACK == 0x3, 0x175, 0x160, 0x0 SCB count = 136 Kernel NEXTQSCB = 61 Card NEXTQSCB = 61 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 7:91 27:59 17:104 15:62 6:17 8:51 10:13 QOUTFIFO entries: Sequencer Free SCB List: 16 12 11 14 29 25 26 2 23 24 20 4 19 13 21 30 0 9 22 28 5 31 3 18 1 Sequencer SCB Info: 0(c 0x60, s 0x87, l 0, t 0xff) 1(c 0x60, s 0xa7, l 0, t 0xff) 2(c 0x60, s 0x87, l 0, t 0xff) 3(c 0x60, s 0x87, l 0, t 0xff) 4(c 0x60, s 0x87, l 0, t 0xff) 5(c 0x60, s 0x87, l 0, t 0xff) 6(c 0x64, s 0x87, l 0, t 0x11) 7(c 0x64, s 0x87, l 0, t 0x5b) 8(c 0x64, s 0x87, l 0, t 0x33) 9(c 0x60, s 0xa7, l 0, t 0xff) 10(c 0x64, s 0x87, l 0, t 0xd) 11(c 0x60, s 0xa7, l 0, t 0xff) 12(c 0x60, s 0x87, l 0, t 0xff) 13(c 0x60, s 0xa7, l 0, t 0xff) 14(c 0x60, s 0xa7, l 0, t 0xff) 15(c 0x64, s 0x87, l 0, t 0x3e) 16(c 0x60, s 0x87, l 0, t 0xff) 17(c 0x64, s 0x87, l 0, t 0x68) 18(c 0x60, s 0xa7, l 0, t 0xff) 19(c 0x60, s 0xa7, l 0, t 0xff) 20(c 0x60, s 0xa7, l 0, t 0xff) 21(c 0x60, s 0xa7, l 0, t 0xff) 22(c 0x60, s 0x87, l 0, t 0xff) 23(c 0x60, s 0x87, l 0, t 0xff) 24(c 0x60, s 0xa7, l 0, t 0xff) 25(c 0x60, s 0xa7, l 0, t 0xff) 26(c 0x60, s 0x87, l 0, t 0xff) 27(c 0x64, s 0x87, l 0, t 0x3b) 28(c 0x60, s 0x87, l 0, t 0xff) 29(c 0x60, s 0x87, l 0, t 0xff) 30(c 0x60, s 0xa7, l 0, t 0xff) 31(c 0x60, s 0xa7, l 0, t 0xff) Pending list: 91(c 0x60, s 0x87, l 0), 59(c 0x60, s 0x87, l 0), 104(c 0x60, s 0x87, l 0), 62(c 0x60, s 0x87, l 0), 17(c 0x60, s 0x87, l 0), 51(c 0x60, s 0x87, l 0), 13(c 0x60, s 0x87, l 0) Kernel Free SCB list: 10 95 126 6 108 105 94 64 44 129 50 84 85 74 53 43 16 106 111 107 22 73 88 28 39 18 119 56 127 63 81 14 15 3 9 54 89 112 31 90 75 19 117 125 98 4 128 130 135 92 69 109 99 7 116 34 20 101 35 72 25 113 100 102 52 110 2 41 23 79 76 21 30 96 114 66 5 70 29 118 78 131 49 11 80 103 58 12 124 36 38 8 121 42 97 24 57 67 120 93 27 77 71 55 123 0 65 1 115 122 60 82 37 47 32 86 83 87 26 134 68 48 33 46 40 45 133 132 DevQ(0:8:0): 0 waiting DevQ(0:10:0): 0 waiting (scsi0:A:8:0): Queuing a recovery SCB scsi0:0:8:0: Device is disconnected, re-queuing SCB Recovery code sleeping (scsi0:A:8:0): Abort Tag Message Sent (scsi0:A:8:0): SCB 51 - Abort Tag Completed. Recovery SCB completes Recovery code awake aic7xxx_abort returns 0x2002 scsi0:0:8:0: Attempting to queue an ABORT message scsi0:0:8:0: Command not found aic7xxx_abort returns 0x2002 scsi0:0:8:0: Attempting to queue an ABORT message scsi0:0:8:0: Command not found aic7xxx_abort returns 0x2002 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/