Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757277AbZLNN0y (ORCPT ); Mon, 14 Dec 2009 08:26:54 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757253AbZLNN0x (ORCPT ); Mon, 14 Dec 2009 08:26:53 -0500 Received: from mail.fem.tu-ilmenau.de ([141.24.101.79]:33409 "EHLO mail.fem.tu-ilmenau.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754734AbZLNN0w (ORCPT ); Mon, 14 Dec 2009 08:26:52 -0500 From: Johannes Hirte To: Borislav Petkov Subject: Re: K8 ECC error with linux-2.6.32 Date: Mon, 14 Dec 2009 14:26:45 +0100 User-Agent: KMail/1.12.4 (Linux/2.6.32; KDE/4.3.4; x86_64; ; ) Cc: linux-kernel@vger.kernel.org References: <200912112202.48173.johannes.hirte@fem.tu-ilmenau.de> <200912112239.05446.johannes.hirte@fem.tu-ilmenau.de> <20091211220756.GA12795@liondog.tnic> In-Reply-To: <20091211220756.GA12795@liondog.tnic> MIME-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <200912141426.46361.johannes.hirte@fem.tu-ilmenau.de> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29453 Lines: 663 Am Freitag 11 Dezember 2009 23:07:56 schrieb Borislav Petkov: > On Fri, Dec 11, 2009 at 10:39:04PM +0100, Johannes Hirte wrote: > > Am Freitag 11 Dezember 2009 22:19:38 schrieb Borislav Petkov: > > > On Fri, Dec 11, 2009 at 10:02:47PM +0100, Johannes Hirte wrote: > > > > With kernel 2.6.32 I get now: > > > > > > > > Dec 11 21:26:37 datengrab kernel: Northbridge Error, node 0, core: -1 > > > > Dec 11 21:26:37 datengrab kernel: K8 ECC error. > > > > > > Is that all, i.e. do you have anything else in the logs. For example, a > > > line which contains "MC?_STATUS: ..." or similar. > > > > No, nothing else. > > > > > Please send the whole > > > dmesg. > > > > It's the log from syslog-ng, but with all dmesg log captured. > > how about doing > > dmesg > dmesg.log > > instead? > > Please send both logs (flgrx and radeon+kms). I wasn't able to reproduce it with fglrx for now. Here is the dmesg when the radeon driver is used: Linux version 2.6.32 (root@datengrab) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #5 SMP Tue Dec 8 22:59:51 CET 2009 Command line: acpi_enforce_resources=lax root=/dev/sda1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000009fff0000 (usable) BIOS-e820: 000000009fff0000 - 000000009ffff000 (ACPI data) BIOS-e820: 000000009ffff000 - 00000000a0000000 (ACPI NVS) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x120000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF00000000 write-back 1 base 0100000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFE0000000 uncachable 3 base 00C0000000 mask FFC0000000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000a0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0x9fff0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000009fff0000 0000000000 - 009fe00000 page 2M 009fe00000 - 009fff0000 page 4k kernel direct mapping tables up to 9fff0000 @ 10000-15000 init_memory_mapping: 0000000100000000-0000000120000000 0100000000 - 0120000000 page 2M kernel direct mapping tables up to 120000000 @ 13000-19000 ACPI: RSDP 00000000000f6d60 00024 (v02 ACPIAM) ACPI: XSDT 000000009fff0100 0004C (v01 A M I OEMXSDT 05000716 MSFT 00000097) ACPI: FACP 000000009fff0281 000F4 (v01 A M I OEMFACP 05000716 MSFT 00000097) ACPI: DSDT 000000009fff03f0 035BC (v01 0AAAA 0AAAA000 00000000 INTL 02002026) ACPI: FACS 000000009ffff000 00040 ACPI: APIC 000000009fff0380 0006C (v01 A M I OEMAPIC 05000716 MSFT 00000097) ACPI: OEMB 000000009ffff040 00041 (v01 A M I OEMBIOS 05000716 MSFT 00000097) ACPI: HPET 000000009fff39b0 00038 (v01 A M I OEMHPET 05000716 MSFT 00000097) ACPI: ASF! 000000009fff39f0 00086 (v01 AMIASF AMDSTRET 00000001 INTL 02002026) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 Number of nodes 2 Node 0 MemBase 0000000000000000 Limit 0000000120000000 Skipping disabled node 1 NUMA: Using 63 for the hash shift. Using node hash shift of 63 ACPI: Local APIC address 0xfee00000 Bootmem setup node 0 0000000000000000-0000000120000000 NODE_DATA [0000000000014000 - 0000000000016fff] bootmap [0000000000017000 - 000000000003afff] pages 24 (7 early reservations) ==> bootmem [0000000000 - 0120000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00015ec544] TEXT DATA BSS ==> [0001000000 - 00015ec544] #3 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #4 [00015ed000 - 00015ed1c1] BRK ==> [00015ed000 - 00015ed1c1] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #6 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002b1fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00120000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0009fff0 0: 0x00100000 -> 0x00120000 On node 0 totalpages: 786303 DMA zone: 56 pages used for memmap DMA zone: 103 pages reserved DMA zone: 3824 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 636968 pages, LIFO batch:31 Normal zone: 1792 pages used for memmap Normal zone: 129280 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x102282a0 base: 0xfec01000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at a0000000 (gap: a0000000:5f780000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880028200000 s71448 r8192 d22760 u524288 pcpu-alloc: s71448 r8192 d22760 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 770072 Policy zone: Normal Kernel command line: acpi_enforce_resources=lax root=/dev/sda1 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... AGP bridge at 00:00:00 Aperture from AGP @ e0000000 old size 32 MB Aperture from AGP @ e0000000 size 256 MB (APSIZE f00) Node 0: aperture @ e0000000 size 256 MB Node 1: aperture @ e0000000 size 256 MB Memory: 3093476k/4718592k available (3377k kernel code, 1573380k absent, 51736k reserved, 1584k data, 388k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:384 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2587.812 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5175.62 BogoMIPS (lpj=2587812) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 mce: CPU supports 5 MCE banks ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: AMD Opteron(tm) Processor 252 stepping 01 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5175.13 BogoMIPS (lpj=2587568) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU1: AMD Opteron(tm) Processor 252 stepping 01 Brought up 2 CPUs Total of 2 processors activated (10350.76 BogoMIPS). NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000a0000000 aka 2560M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [a0000000, ffffffff] TOM2: 0000000120000000 aka 4608M bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [a0000000, ffffffff] bus: 00 index 3 mmio: [120000000, fcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] pci 0000:00:07.1: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:07.2: reg 10 io port: [0xcc00-0xcc1f] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xff3f0000-0xff3fffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xff3c0000-0xff3dffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x7000-0x9fff] pci 0000:00:01.0: bridge 32bit mmio: [0xff300000-0xff3fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbeb00000-0xdeafffff] pci 0000:02:00.0: reg 10 32bit mmio: [0xff5fd000-0xff5fdfff] pci 0000:02:00.1: reg 10 32bit mmio: [0xff5fe000-0xff5fefff] pci 0000:02:03.0: reg 10 32bit mmio: [0xff5c0000-0xff5dffff] pci 0000:02:03.0: reg 14 32bit mmio: [0xff5a0000-0xff5bffff] pci 0000:02:03.0: reg 18 io port: [0xb000-0xb03f] pci 0000:02:03.0: reg 30 32bit mmio pref: [0xff580000-0xff59ffff] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold pci 0000:02:03.0: PME# disabled pci 0000:02:05.0: reg 10 io port: [0xb880-0xb887] pci 0000:02:05.0: reg 14 io port: [0xb800-0xb803] pci 0000:02:05.0: reg 18 io port: [0xb480-0xb487] pci 0000:02:05.0: reg 1c io port: [0xb400-0xb403] pci 0000:02:05.0: reg 20 io port: [0xb080-0xb08f] pci 0000:02:05.0: reg 24 32bit mmio: [0xff5ffc00-0xff5fffff] pci 0000:02:05.0: reg 30 32bit mmio pref: [0xff500000-0xff57ffff] pci 0000:02:05.0: supports D1 D2 pci 0000:02:07.0: reg 10 io port: [0xac00-0xac1f] pci 0000:02:07.0: supports D1 D2 pci 0000:02:07.1: reg 10 io port: [0xbc00-0xbc07] pci 0000:02:07.1: supports D1 D2 pci 0000:02:0a.0: reg 10 32bit mmio: [0xff5fc800-0xff5fcfff] pci 0000:02:0a.0: reg 14 io port: [0xa880-0xa8ff] pci 0000:02:0a.0: supports D2 pci 0000:02:0a.0: PME# supported from D2 D3hot D3cold pci 0000:02:0a.0: PME# disabled pci 0000:02:0b.0: reg 20 io port: [0xa480-0xa49f] pci 0000:02:0b.0: supports D1 D2 pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:0b.0: PME# disabled pci 0000:02:0b.1: reg 20 io port: [0xa800-0xa81f] pci 0000:02:0b.1: supports D1 D2 pci 0000:02:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:0b.1: PME# disabled pci 0000:02:0b.2: reg 10 32bit mmio: [0xff5ff000-0xff5ff0ff] pci 0000:02:0b.2: supports D1 D2 pci 0000:02:0b.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:0b.2: PME# disabled pci 0000:00:06.0: bridge io port: [0xa000-0xbfff] pci 0000:00:06.0: bridge 32bit mmio: [0xff400000-0xff5fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 0: address space collision on of device [0xe0000000-0xefffffff] pci 0000:00:00.0: BAR 0: can't allocate resource hpet0: at MMIO 0xfec01000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0e: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling pnp 00:0e: mem resource (0xc0000-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling pnp 00:0e: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling pnp 00:0e: mem resource (0x100000-0x9fffffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:0a: ioport range 0x680-0x6ff has been reserved system 00:0a: ioport range 0x295-0x296 has been reserved system 00:0a: ioport range 0x778-0x77f has been reserved system 00:0a: ioport range 0xb78-0xb7f has been reserved system 00:0a: ioport range 0xf78-0xf7f has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0x1000-0x10bf has been reserved system 00:0b: ioport range 0x10e0-0x10ff has been reserved system 00:0b: ioport range 0x10c0-0x10df has been reserved system 00:0b: ioport range 0xde00-0xde7f has been reserved system 00:0b: ioport range 0xde80-0xdeff has been reserved system 00:0d: ioport range 0xca0-0xcaf has been reserved system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0d: iomem range 0xfff80000-0xffffffff has been reserved system 00:0d: iomem range 0xff780000-0xff7fffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x7000-0x9fff pci 0000:00:01.0: MEM window: 0xff300000-0xff3fffff pci 0000:00:01.0: PREFETCH window: 0xbeb00000-0xdeafffff pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 pci 0000:00:06.0: IO window: 0xa000-0xbfff pci 0000:00:06.0: MEM window: 0xff400000-0xff5fffff pci 0000:00:06.0: PREFETCH window: disabled pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x7000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xff300000-0xff3fffff] pci_bus 0000:01: resource 2 pref mem [0xbeb00000-0xdeafffff] pci_bus 0000:02: resource 0 io: [0xa000-0xbfff] pci_bus 0000:02: resource 1 mem: [0xff400000-0xff5fffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:07.3: boot interrupts on device [1022:746b] already disabled pci 0000:01:00.0: Boot video device agpgart-amd64 0000:00:00.0: AMD 8151 AGP Bridge rev B3 agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 init_memory_mapping: 00000000e0000000-00000000f0000000 00e0000000 - 00f0000000 page 2M PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture microcode: no support for this CPU vendor HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Btrfs loaded msgmni has been set to 6041 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 AMD768 RNG detected Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A loop: module loaded pata_amd 0000:00:07.1: version 0.4.1 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:02:03.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata1.00: ATA-6: ST3120026A, 8.54, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.01: ATA-6: WDC WD2500SB-01KBA0, 08.02D08, max UDMA/100 ata1.01: 488397168 sectors, multi 16: LBA48 e1000: 0000:02:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:e0:81:2b:c6:dd ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST3120026A 8.54 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off scsi 0:0:1:0: Direct-Access ATA WDC WD2500SB-01K 08.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda: sd 0:0:1:0: [sdb] Attached SCSI disk sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata2.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:02:0b.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:02:0b.2: EHCI Host Controller ehci_hcd 0000:02:0b.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:02:0b.2: irq 19, io mem 0xff5ff000 ehci_hcd 0000:02:0b.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm- devel@redhat.com EDAC MC: Ver: 2.1.0 Dec 8 2009 EDAC amd64_edac: Ver: 3.2.0 Dec 8 2009 EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC MC: Rev E or earlier detected EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 EDAC MC: Rev E or earlier detected EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2 EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller powernow-k8: Found 1 AMD Opteron(tm) Processor 252 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x6 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0x8 powernow-k8: 2 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x8 powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x8 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x8 powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x6 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0x8 powernow-k8: 2 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x8 powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x8 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x8 rtc_cmos 00:02: setting system clock to 2009-12-14 13:24:37 UTC (1260797077) usb 1-3: new high speed USB device using ehci_hcd and address 2 device fsid 5c40945eb102d7aa-2b8ac816f03a0b89 devid 1 transid 76418 /dev/root usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected Clocksource tsc unstable (delta = -328876059 ns) VFS: Mounted root (btrfs filesystem) readonly on device 0:14. Freeing unused kernel memory: 388k freed Write protecting the kernel read-only data: 4468k udev: starting version 149 sata_sil 0000:02:05.0: version 2.4 sata_sil 0000:02:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 scsi2 : sata_sil scsi3 : sata_sil ACPI: I/O resource amd756_smbus [0x10e0-0x10ef] conflicts with ACPI region PMIO [0x1000-0x10fe] ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver scsi4 : sata_sil scsi5 : sata_sil ata3: SATA max UDMA/100 mmio m1024@0xff5ffc00 tf 0xff5ffc80 irq 19 ata4: SATA max UDMA/100 mmio m1024@0xff5ffc00 tf 0xff5ffcc0 irq 19 ata5: SATA max UDMA/100 mmio m1024@0xff5ffc00 tf 0xff5ffe80 irq 19 ata6: SATA max UDMA/100 mmio m1024@0xff5ffc00 tf 0xff5ffec0 irq 19 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:02:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:02:00.0: OHCI Host Controller ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:02:00.0: irq 19, io mem 0xff5fd000 uhci_hcd: USB Universal Host Controller Interface driver usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected uhci_hcd 0000:02:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:02:0b.0: UHCI Host Controller uhci_hcd 0000:02:0b.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:02:0b.0: irq 17, io base 0x0000a480 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:02:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:02:00.1: OHCI Host Controller ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:02:00.1: irq 19, io mem 0xff5fe000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected uhci_hcd 0000:02:0b.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:02:0b.1: UHCI Host Controller uhci_hcd 0000:02:0b.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:02:0b.1: irq 18, io base 0x0000a800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 sr 1:0:0:0: Attached scsi generic sg2 type 5 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: I/O resource 0000:00:07.2 [0xcc00-0xcc1f] conflicts with ACPI region ECIO [0xcc00-0xcc1f] ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133 ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1) ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5 sd 2:0:0:0: Attached scsi generic sg3 type 0 sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sd 2:0:0:0: [sdc] Attached SCSI disk usb 4-1: new low speed USB device using ohci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:06.0/0000:02:00.1/usb4/4-1/4-1:1.0/input/input2 generic-usb 0003:046D:C03E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:02:00.1-1/input0 ata4: SATA link down (SStatus 0 SControl 310) usb 4-2: new low speed USB device using ohci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:06.0/0000:02:00.1/usb4/4-2/4-2:1.0/input/input3 generic-usb 0003:413C:2003.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:02:00.1-2/input0 ata5: SATA link down (SStatus 0 SControl 310) ata6: SATA link down (SStatus 0 SControl 310) EMU10K1_Audigy 0000:02:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 device fsid 684de8a411520e72-b8f11b72f9f953b9 devid 1 transid 50477 /dev/mapper/sdb Adding 2104504k swap on /dev/sda2. Priority:-1 extents:1 across:2104504k e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period eth0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFF3F0000 [drm] register mmio size: 65536 ATOM BIOS: [drm] Clocks initialized ! agpgart-amd64 0000:00:00.0: AGP 3.0 bridge agpgart-amd64 0000:00:00.0: putting AGP V3 device into 4x mode radeon 0000:01:00.0: putting AGP V3 device into 4x mode mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 1546932 kiB. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 128M of GTT memory ready. [drm] Loading RV635 CP Microcode platform radeon_cp.0: firmware: requesting radeon/RV635_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RV635_me.bin [drm] GART: num cpu pages 32768, num gpu pages 32768 [drm] ring test succeeded in 0 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 1: [drm] DIN [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Connector 2: [drm] DVI-I [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP2: INTERNAL_KLDSCP_LVTMA [drm] fb mappable at 0xC0081000 [drm] vram apper at 0xC0000000 [drm] size 7257600 [drm] fb depth is 24 [drm] pitch is 6912 executing set pll executing set crtc timing [drm] TMDS-9: set mode 1680x1050 29 Console: switching to colour frame buffer device 210x65 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. Northbridge Error, node 0, core: -1 K8 ECC error. A screenshot with the corresponding corruptions can be seen at http://www.stud.tu-ilmenau.de/~johi-in/pic2.jpeg -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/