Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756323AbZLPCzr (ORCPT ); Tue, 15 Dec 2009 21:55:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756209AbZLPCzq (ORCPT ); Tue, 15 Dec 2009 21:55:46 -0500 Received: from fgwmail6.fujitsu.co.jp ([192.51.44.36]:49901 "EHLO fgwmail6.fujitsu.co.jp" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756200AbZLPCzn (ORCPT ); Tue, 15 Dec 2009 21:55:43 -0500 X-SecurityPolicyCheck-FJ: OK by FujitsuOutboundMailChecker v1.3.1 Message-ID: <4B284C01.70307@jp.fujitsu.com> Date: Wed, 16 Dec 2009 11:54:57 +0900 From: Hidetoshi Seto User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; ja; rv:1.9.1.5) Gecko/20091204 Thunderbird/3.0 MIME-Version: 1.0 To: Mike Travis CC: linux-kernel@vger.kernel.org, Ingo Molnar , Thomas Gleixner , Andrew Morton , Andi Kleen , "H. Peter Anvin" , x86@kernel.org Subject: Re: [PATCH] x86, mce: rework output of MCE banks ownership information References: <4B26EBB0.3090507@jp.fujitsu.com> <4B27DFE9.2030308@sgi.com> In-Reply-To: <4B27DFE9.2030308@sgi.com> Content-Type: text/plain; charset=ISO-2022-JP Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8651 Lines: 208 (2009/12/16 4:13), Mike Travis wrote: > > Hidetoshi Seto wrote: >> The output of MCE banks ownership information on boot tend >> to be long on new processor which has many banks: >> >> CPU 1 MCA banks SHD:0 SHD:1 CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19 SHD:20 SHD:21 >> >> This message can fill up the console output when the number >> of cpus is large. >> >> This patch suppress this info message on boot, and introduce >> debug message in shorter format instead, like: >> >> CPU 1 MCE banks map: ssCC PCss ssPP ssss ssss ss >> >> where: s: shared, C: checked by cmci, P: checked by poll. >> >> This patch still keep the info when ownership is updated. >> E.g. when a cpu take over the ownership from hot-removed cpu, >> both message will be shown: >> >> CPU 1 MCE banks map updated: CMCI:6 CMCI:7 CMCI:10 CMCI:11 >> CPU 1 MCE banks map: ssCC PCCC ssPP ssCC ssss ss >> >> v2: >> - stop changing the level of message on update >> - change the number of banks message on boot to debug level >> >> v3: >> - avoid use of pr_cont with pr_debug in print_banks_map() >> >> Signed-off-by: Hidetoshi Seto >> Cc: Mike Travis >> --- >> arch/x86/kernel/cpu/mcheck/mce.c | 6 +++--- >> arch/x86/kernel/cpu/mcheck/mce_intel.c | 30 ++++++++++++++++++++++++------ >> 2 files changed, 27 insertions(+), 9 deletions(-) >> >> diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c >> index a8aacd4..8d6afea 100644 >> --- a/arch/x86/kernel/cpu/mcheck/mce.c >> +++ b/arch/x86/kernel/cpu/mcheck/mce.c >> @@ -1229,11 +1229,11 @@ static int __cpuinit __mcheck_cpu_cap_init(void) >> >> b = cap & MCG_BANKCNT_MASK; >> if (!banks) >> - printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b); >> + pr_debug("mce: CPU supports %d MCE banks\n", b); >> >> if (b > MAX_NR_BANKS) { >> - printk(KERN_WARNING >> - "MCE: Using only %u machine check banks out of %u\n", >> + pr_warning( >> + "MCE: Using only %u machine check banks out of %u\n", >> MAX_NR_BANKS, b); >> b = MAX_NR_BANKS; >> } >> diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c >> index 7c78563..234e473 100644 >> --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c >> +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c >> @@ -64,12 +64,26 @@ static void intel_threshold_interrupt(void) >> mce_notify_irq(); >> } >> >> +static void print_banks_map(int banks) >> +{ >> + char buf[32 + MAX_NR_BANKS * 5 / 4]; /* 72 if MAX_NR_BANKS == 32 */ >> + int i, n, ln = sizeof(buf); >> + >> + n = snprintf(buf, ln, "CPU %d MCE banks map:", smp_processor_id()); >> + for (i = 0; i < banks; i++) { >> + n += snprintf(&buf[n], ln - n, "%s%s", (i % 4) ? "" : " ", >> + test_bit(i, __get_cpu_var(mce_banks_owned)) ? "C" : >> + test_bit(i, __get_cpu_var(mce_poll_banks)) ? "P" : "s"); >> + } >> + pr_debug("%s\n", buf); >> +} >> + >> static void print_update(char *type, int *hdr, int num) >> { >> if (*hdr == 0) >> - printk(KERN_INFO "CPU %d MCA banks", smp_processor_id()); >> + pr_info("CPU %d MCE banks map updated:", smp_processor_id()); >> *hdr = 1; >> - printk(KERN_CONT " %s:%d", type, num); >> + pr_cont(" %s:%d", type, num); > > This pr_cont will cause problems. If debug printout is not enabled then > the "%s:%d" will be interspersed with the output of the "Booting processors" > line. As I described in the patch description, my patch modified cmci_discover() not to call this print_update() while boot. Now this print_update() is only called on hotplug events, never be called on boot. And the level of message here is still info, so use of pr_cont with pr_info have no problem because it is not with pr_debug. OTOH print_banks_map() is called on boot, but it does not use pr_cont(). > Ideally the output looks like: > > [ 2.100837] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. > [ 2.614888] Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok. > [ 3.196690] Booting Node 2, Processors #16 #17 #18 #19 #20 #21 #22 #23 Ok. > [ 3.777600] Booting Node 3, Processors #24 #25 #26 #27 #28 #29 #30 #31 Ok. > [ 4.359413] Booting Node 0, Processors #32 #33 #34 #35 #36 #37 #38 #39 Ok. > [ 4.940339] Booting Node 1, Processors #40 #41 #42 #43 #44 #45 #46 #47 Ok. > [ 5.522072] Booting Node 2, Processors #48 #49 #50 #51 #52 #53 #54 #55 Ok. > [ 6.106016] Booting Node 3, Processors #56 #57 #58 #59 #60 #61 #62 #63 Ok. > > Currently the output looks like: > > > [ 0.722553] Booting Node 0, Processors #1 > [ 0.811625] CPU 1 MCA banks SHD:0 SHD:1 CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19 SHD:20 SHD:21 > [ 0.812071] #2 > [ 0.907468] CPU 2 MCA banks SHD:0 SHD:1 CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19 SHD:20 SHD:21 > [ 0.907918] #3 > [ 1.003311] CPU 3 MCA banks SHD:0 SHD:1 CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19 SHD:20 SHD:21 > [ 1.003750] #4 > [ 1.099154] CPU 4 MCA banks SHD:0 SHD:1 CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19 SHD:20 SHD:21 > [ 1.099550] #5 > [ 1.194995] CPU 5 MCA banks SHD:0 SHD:1 CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19 SHD:20 SHD:21 > [ 1.195375] #6 > [ 1.290837] CPU 6 MCA banks SHD:0 SHD:1 CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19 SHD:20 SHD:21 > [ 1.291284] #7 > [ 1.386680] CPU 7 MCA banks SHD:0 SHD:1 CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19 SHD:20 SHD:21 > [ 1.387162] Ok. > [ 1.404836] Booting Node 1, Processors #8 > [ 1.490509] CPU 8 MCA banks CMCI:0 CMCI:1 CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8 CMCI:9 CMCI:12 CMCI:13 CMCI:14 CMCI:15 CMCI:16 CMCI:17 CMCI:18 CMCI:19 CMCI:20 CMCI:21 > [ 1.490942] #9 > [ 1.590350] CPU 9 MCA banks SHD:0 SHD:1 CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19 SHD:20 SHD:21 What wrong happen if my patch applied? Why your change on print_update() is needed? >> } >> >> /* >> @@ -85,6 +99,7 @@ static void cmci_discover(int banks, int boot) >> int i; >> >> spin_lock_irqsave(&cmci_discover_lock, flags); >> + >> for (i = 0; i < banks; i++) { >> u64 val; >> >> @@ -95,7 +110,7 @@ static void cmci_discover(int banks, int boot) >> >> /* Already owned by someone else? */ >> if (val & CMCI_EN) { >> - if (test_and_clear_bit(i, owned) || boot) >> + if (test_and_clear_bit(i, owned) && !boot) >> print_update("SHD", &hdr, i); >> __clear_bit(i, __get_cpu_var(mce_poll_banks)); >> continue; >> @@ -107,16 +122,19 @@ static void cmci_discover(int banks, int boot) >> >> /* Did the enable bit stick? -- the bank supports CMCI */ >> if (val & CMCI_EN) { >> - if (!test_and_set_bit(i, owned) || boot) >> + if (!test_and_set_bit(i, owned) && !boot) >> print_update("CMCI", &hdr, i); >> __clear_bit(i, __get_cpu_var(mce_poll_banks)); >> } else { >> WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks))); >> } >> } >> - spin_unlock_irqrestore(&cmci_discover_lock, flags); >> if (hdr) >> - printk(KERN_CONT "\n"); >> + pr_cont("\n"); >> + if (hdr || boot) >> + print_banks_map(banks); >> + >> + spin_unlock_irqrestore(&cmci_discover_lock, flags); >> } >> >> /* > > The real question to ask here is if this output really adds anything to > system bringup? If it's informational only, then it should be available > online after the system is booted. If it can be attached to an error, > then the information should only be printed in the case of that error. > Removing from the console log informational only ("chatty") type output > is the goal of this patch series. > > Thanks, > Mike It will be hard for kernel to determine whether the status is error or not, without something like processor hardware specification catalog etc. Maybe we could have alternative way to access the information in future, e.g. sysfs. And then we could get rid of the debug message. Thanks, H.Seto -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/