Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S936775AbZLQWkC (ORCPT ); Thu, 17 Dec 2009 17:40:02 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S936750AbZLQWj6 (ORCPT ); Thu, 17 Dec 2009 17:39:58 -0500 Received: from smtp28.orange.fr ([80.12.242.100]:29498 "EHLO smtp28.orange.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S935246AbZLQWj4 convert rfc822-to-8bit (ORCPT ); Thu, 17 Dec 2009 17:39:56 -0500 X-ME-UUID: 20091217223951916.165CD8000256@mwinf2814.orange.fr Subject: Re: No PCI-X / PCI-E cards ... From: Xavier Bestel To: linux-kernel@vger.kernel.org In-Reply-To: <1260979057.23135.70.camel@skunk> References: <1260979057.23135.70.camel@skunk> Content-Type: text/plain; charset="UTF-8" Date: Thu, 17 Dec 2009 23:39:52 +0100 Message-ID: <1261089592.8827.5.camel@bip> Mime-Version: 1.0 X-Mailer: Evolution 2.28.2 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 55364 Lines: 882 Anyone ? Le mercredi 16 décembre 2009 à 16:57 +0100, Xavier Bestel a écrit : > Hi, > > I have a Tyan Bigby-P S5217, with a stock debian 2.6.31 kernel, which > apparently doesn't "see" the cards I plug (it sees its internal > peripherals fine). > > I first plugged a wifi PCI card into a PCI-X slot (there's no PCI slot), > it didn't appear in lspci. As I thought it was a voltage problem (PCI-X > only accept 3.3v, not 5v IIRC) I bought a PCI-E one. > It's still not seen in lspci. > > The only maybe-kind-of relevant things I see in dmesg are: > > [ 0.162705] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 16 > [ 0.164635] PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources > [ 0.164722] PCI: Not using MMCONFIG. > > [ 0.184095] PCI: Using ACPI for IRQ routing > [ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource > > > Does anyone know what I can do to pinpoint the problem ? > > Thanks, > Xav > > > PS: lspci & dmesg follow, please Cc: me on answers. > > > 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) > 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) > 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) > 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) > 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) > 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) > 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) > 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) > 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) > 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) > 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) > 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) > 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) > 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) > 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 02) > 0d:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller > 0f:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller > 11:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) > > > > > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.31-1-amd64 (Debian 2.6.31-2) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Nov 15 22:05:44 UTC 2009 > [ 0.000000] Command line: root=/dev/md1 ro > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) > [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfed0000 (usable) > [ 0.000000] BIOS-e820: 00000000dfed0000 - 00000000dfede000 (ACPI data) > [ 0.000000] BIOS-e820: 00000000dfede000 - 00000000dfedf000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000dfedf000 - 00000000e0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) > [ 0.000000] DMI present. > [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) > [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-CBFFF write-protect > [ 0.000000] CC000-DFFFF uncachable > [ 0.000000] E0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask F80000000 write-back > [ 0.000000] 1 base 080000000 mask FC0000000 write-back > [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back > [ 0.000000] 3 base 100000000 mask FE0000000 write-back > [ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) > [ 0.000000] last_pfn = 0xdfed0 max_arch_pfn = 0x400000000 > [ 0.000000] initial memory mapped : 0 - 20000000 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfed0000 > [ 0.000000] 0000000000 - 00dfe00000 page 2M > [ 0.000000] 00dfe00000 - 00dfed0000 page 4k > [ 0.000000] kernel direct mapping tables up to dfed0000 @ 10000-16000 > [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 > [ 0.000000] 0100000000 - 0120000000 page 2M > [ 0.000000] kernel direct mapping tables up to 120000000 @ 14000-1a000 > [ 0.000000] RAMDISK: 37760000 - 37fef1bc > [ 0.000000] ACPI: RSDP 00000000000f6d70 00024 (v02 PTLTD ) > [ 0.000000] ACPI: XSDT 00000000dfed3f2f 0008C (v01 PTLTD XSDT 06040000 LTP 00000000) > [ 0.000000] ACPI: FACP 00000000dfedde40 000F4 (v03 INTEL Bigby 06040000 PTL 00000002) > [ 0.000000] ACPI: DSDT 00000000dfed7fa7 05E15 (v01 INTEL BIGBY 06040000 MSFT 0100000E) > [ 0.000000] ACPI: FACS 00000000dfedefc0 00040 > [ 0.000000] ACPI: MCFG 00000000dfeddf34 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) > [ 0.000000] ACPI: APIC 00000000dfeddf70 00068 (v01 PTLTD APIC 06040000 LTP 00000000) > [ 0.000000] ACPI: BOOT 00000000dfeddfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) > [ 0.000000] ACPI: SSDT 00000000dfed582e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) > [ 0.000000] ACPI: SSDT 00000000dfed5788 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228) > [ 0.000000] ACPI: SSDT 00000000dfed56e2 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228) > [ 0.000000] ACPI: SSDT 00000000dfed563c 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228) > [ 0.000000] ACPI: SSDT 00000000dfed5596 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228) > [ 0.000000] ACPI: SSDT 00000000dfed54f0 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228) > [ 0.000000] ACPI: SSDT 00000000dfed544a 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228) > [ 0.000000] ACPI: SSDT 00000000dfed53a4 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) > [ 0.000000] ACPI: SSDT 00000000dfed3fbb 013E9 (v01 PmRef CpuPm 00003000 INTL 20050228) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000120000000 > [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 > [ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff] > [ 0.000000] bootmap [000000000001d000 - 0000000000040fff] pages 24 > [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > [ 0.000000] #2 [0001000000 - 0001631d2c] TEXT DATA BSS ==> [0001000000 - 0001631d2c] > [ 0.000000] #3 [0037760000 - 0037fef1bc] RAMDISK ==> [0037760000 - 0037fef1bc] > [ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] > [ 0.000000] #5 [0001632000 - 0001632174] BRK ==> [0001632000 - 0001632174] > [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] > [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] > [ 0.000000] found SMP MP-table at [ffff8800000f6da0] f6da0 > [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00120000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009e > [ 0.000000] 0: 0x00000100 -> 0x000dfed0 > [ 0.000000] 0: 0x00100000 -> 0x00120000 > [ 0.000000] On node 0 totalpages: 1048158 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 105 pages reserved > [ 0.000000] DMA zone: 3821 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 14280 pages used for memmap > [ 0.000000] DMA32 zone: 898824 pages, LIFO batch:31 > [ 0.000000] Normal zone: 1792 pages used for memmap > [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 24 > [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 00000000dfed0000 - 00000000dfede000 > [ 0.000000] PM: Registered nosave memory: 00000000dfede000 - 00000000dfedf000 > [ 0.000000] PM: Registered nosave memory: 00000000dfedf000 - 00000000e0000000 > [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 > [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 > [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 > [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 > [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) > [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 29 pages at ffff88002801f000, static data 86368 bytes > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031925 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: root=/dev/md1 ro > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) > [ 0.000000] Initializing CPU#0 > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! > [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 > [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 > [ 0.000000] Memory: 4051700k/4718592k available (2947k kernel code, 525960k absent, 140932k reserved, 1661k data, 648k init) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:4352 nr_irqs:424 > [ 0.000000] Extended CMOS year: 2000 > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 2393.470 MHz processor. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console [tty0] enabled > [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4786.94 BogoMIPS (lpj=9573880) > [ 0.004218] Security Framework initialized > [ 0.004286] SELinux: Disabled at boot. > [ 0.004684] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > [ 0.007008] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > [ 0.008202] Mount-cache hash table entries: 256 > [ 0.008421] Initializing cgroup subsys ns > [ 0.008489] Initializing cgroup subsys cpuacct > [ 0.008555] Initializing cgroup subsys devices > [ 0.008621] Initializing cgroup subsys freezer > [ 0.008686] Initializing cgroup subsys net_cls > [ 0.008776] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.008884] CPU: L2 cache: 2048K > [ 0.008948] CPU 0/0x0 -> Node 0 > [ 0.009011] CPU: Physical Processor ID: 0 > [ 0.009075] CPU: Processor Core ID: 0 > [ 0.009140] mce: CPU supports 6 MCE banks > [ 0.009208] CPU0: Thermal monitoring handled by SMI > [ 0.009211] using mwait in idle threads. > [ 0.009275] Performance Counters: Core2 events, Intel PMU driver. > [ 0.009432] ... version: 2 > [ 0.009496] ... bit width: 40 > [ 0.009560] ... generic counters: 2 > [ 0.009624] ... value mask: 000000ffffffffff > [ 0.009690] ... max period: 000000007fffffff > [ 0.009757] ... fixed-purpose counters: 3 > [ 0.009821] ... counter mask: 0000000700000003 > [ 0.010764] ACPI: Core revision 20090521 > [ 0.020058] Setting APIC routing to flat > [ 0.020436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.061199] CPU0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d > [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000 > [ 0.004000] Initializing CPU#1 > [ 0.004000] Calibrating delay using timer specific routine.. 4788.23 BogoMIPS (lpj=9576478) > [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.004000] CPU: L2 cache: 2048K > [ 0.004000] CPU 1/0x1 -> Node 0 > [ 0.004000] CPU: Physical Processor ID: 0 > [ 0.004000] CPU: Processor Core ID: 1 > [ 0.004000] mce: CPU supports 6 MCE banks > [ 0.004000] CPU1: Thermal monitoring enabled (TM2) > [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > [ 0.149291] CPU1: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d > [ 0.150108] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.152026] Brought up 2 CPUs > [ 0.152091] Total of 2 processors activated (9575.17 BogoMIPS). > [ 0.152220] CPU0 attaching sched-domain: > [ 0.152223] domain 0: span 0-1 level MC > [ 0.152225] groups: 0 1 > [ 0.152229] CPU1 attaching sched-domain: > [ 0.152231] domain 0: span 0-1 level MC > [ 0.152233] groups: 1 0 > [ 0.152298] Booting paravirtualized kernel on bare hardware > [ 0.152298] regulator: core version 0.5 > [ 0.152298] NET: Registered protocol family 16 > [ 0.152304] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > [ 0.152390] ACPI: bus type pci registered > [ 0.152517] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 16 > [ 0.152587] PCI: Not using MMCONFIG. > [ 0.152651] PCI: Using configuration type 1 for base access > [ 0.156332] bio: create slab at 0 > [ 0.156498] ACPI: EC: Look up EC in DSDT > [ 0.162244] ACPI: Interpreter enabled > [ 0.162310] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.162605] ACPI: Using IOAPIC for interrupt routing > [ 0.162705] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 16 > [ 0.164635] PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources > [ 0.164722] PCI: Not using MMCONFIG. > [ 0.168525] ACPI: No dock devices found. > [ 0.169496] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.169689] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] > [ 0.169768] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] > [ 0.169844] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f] > [ 0.169914] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe8501800-0xe8501bff] > [ 0.169967] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > [ 0.170038] pci 0000:00:1a.7: PME# disabled > [ 0.170158] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.170228] pci 0000:00:1c.0: PME# disabled > [ 0.170349] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > [ 0.170419] pci 0000:00:1c.4: PME# disabled > [ 0.170538] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > [ 0.170608] pci 0000:00:1c.5: PME# disabled > [ 0.170722] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] > [ 0.170803] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] > [ 0.170879] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] > [ 0.170949] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8501c00-0xe8501fff] > [ 0.171001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.171072] pci 0000:00:1d.7: PME# disabled > [ 0.171254] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 > [ 0.171259] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO > [ 0.171346] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO > [ 0.171417] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 007f) > [ 0.171504] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) > [ 0.171648] pci 0000:00:1f.2: reg 10 io port: [0x1c78-0x1c7f] > [ 0.171653] pci 0000:00:1f.2: reg 14 io port: [0x1c6c-0x1c6f] > [ 0.171658] pci 0000:00:1f.2: reg 18 io port: [0x1c70-0x1c77] > [ 0.171664] pci 0000:00:1f.2: reg 1c io port: [0x1c68-0x1c6b] > [ 0.171669] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] > [ 0.171675] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe8501000-0xe85017ff] > [ 0.171705] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.171773] pci 0000:00:1f.2: PME# disabled > [ 0.171864] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe8502000-0xe85020ff] > [ 0.171877] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] > [ 0.171926] pci 0000:00:1f.6: reg 10 64bit mmio: [0xe8500000-0xe8500fff] > [ 0.172023] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] > [ 0.172091] pci 0000:0d:00.0: reg 10 32bit mmio: [0xe8080000-0xe809ffff] > [ 0.172102] pci 0000:0d:00.0: reg 14 32bit mmio: [0xe8000000-0xe807ffff] > [ 0.172113] pci 0000:0d:00.0: reg 18 io port: [0x2000-0x201f] > [ 0.172197] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold > [ 0.172270] pci 0000:0d:00.0: PME# disabled > [ 0.172383] pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff] > [ 0.172387] pci 0000:00:1c.4: bridge 32bit mmio: [0xe8000000-0xe80fffff] > [ 0.172452] pci 0000:0f:00.0: reg 10 32bit mmio: [0xe8180000-0xe819ffff] > [ 0.172463] pci 0000:0f:00.0: reg 14 32bit mmio: [0xe8100000-0xe817ffff] > [ 0.172474] pci 0000:0f:00.0: reg 18 io port: [0x3000-0x301f] > [ 0.172557] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold > [ 0.172630] pci 0000:0f:00.0: PME# disabled > [ 0.172743] pci 0000:00:1c.5: bridge io port: [0x3000-0x3fff] > [ 0.172747] pci 0000:00:1c.5: bridge 32bit mmio: [0xe8100000-0xe81fffff] > [ 0.172789] pci 0000:11:03.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] > [ 0.172796] pci 0000:11:03.0: reg 14 io port: [0x4000-0x40ff] > [ 0.172802] pci 0000:11:03.0: reg 18 32bit mmio: [0xe8200000-0xe820ffff] > [ 0.172823] pci 0000:11:03.0: reg 30 32bit mmio: [0x000000-0x01ffff] > [ 0.172842] pci 0000:11:03.0: supports D1 D2 > [ 0.172883] pci 0000:00:1e.0: transparent bridge > [ 0.172951] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff] > [ 0.172954] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8200000-0xe82fffff] > [ 0.172960] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe7ffffff] > [ 0.172979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.173218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] > [ 0.173291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] > [ 0.173356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] > [ 0.173433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > [ 0.178179] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) > [ 0.178845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [ 0.179511] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) > [ 0.180180] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.180950] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.181720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.182490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) > [ 0.183159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. > [ 0.183926] usbcore: registered new interface driver usbfs > [ 0.184015] usbcore: registered new interface driver hub > [ 0.184091] usbcore: registered new device driver usb > [ 0.184095] PCI: Using ACPI for IRQ routing > [ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource > [ 0.192140] hpet clockevent registered > [ 0.192145] HPET: 4 timers in total, 0 timers will be used for per-cpu timer > [ 0.192237] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > [ 0.192521] hpet0: 4 comparators, 64-bit 14.318180 MHz counter > [ 0.208092] pnp: PnP ACPI init > [ 0.208173] ACPI: bus type pnp registered > [ 0.210720] pnp: PnP ACPI: found 10 devices > [ 0.210786] ACPI: ACPI bus type pnp unregistered > [ 0.210860] system 00:01: ioport range 0x600-0x63f has been reserved > [ 0.210930] system 00:01: ioport range 0x800-0x80f has been reserved > [ 0.211000] system 00:01: ioport range 0xca0-0xcaf has been reserved > [ 0.211069] system 00:01: ioport range 0x1000-0x107f has been reserved > [ 0.211139] system 00:01: ioport range 0x1180-0x11bf has been reserved > [ 0.211209] system 00:01: ioport range 0x4d0-0x4d1 has been reserved > [ 0.211279] system 00:01: ioport range 0xfe00-0xfe00 has been reserved > [ 0.211349] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved > [ 0.211420] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved > [ 0.211492] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved > [ 0.211563] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved > [ 0.216316] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 > [ 0.216385] pci 0000:00:1c.0: IO window: disabled > [ 0.216454] pci 0000:00:1c.0: MEM window: disabled > [ 0.216522] pci 0000:00:1c.0: PREFETCH window: disabled > [ 0.216591] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d > [ 0.216660] pci 0000:00:1c.4: IO window: 0x2000-0x2fff > [ 0.216730] pci 0000:00:1c.4: MEM window: 0xe8000000-0xe80fffff > [ 0.216800] pci 0000:00:1c.4: PREFETCH window: disabled > [ 0.216869] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0f > [ 0.216937] pci 0000:00:1c.5: IO window: 0x3000-0x3fff > [ 0.217007] pci 0000:00:1c.5: MEM window: 0xe8100000-0xe81fffff > [ 0.217077] pci 0000:00:1c.5: PREFETCH window: disabled > [ 0.217148] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11 > [ 0.217217] pci 0000:00:1e.0: IO window: 0x4000-0x4fff > [ 0.217287] pci 0000:00:1e.0: MEM window: 0xe8200000-0xe82fffff > [ 0.217358] pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff > [ 0.217453] alloc irq_desc for 16 on node 0 > [ 0.217455] alloc kstat_irqs on node 0 > [ 0.217459] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.217532] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.217538] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.217610] pci 0000:00:1c.4: setting latency timer to 64 > [ 0.217616] alloc irq_desc for 17 on node 0 > [ 0.217617] alloc kstat_irqs on node 0 > [ 0.217620] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.217691] pci 0000:00:1c.5: setting latency timer to 64 > [ 0.217697] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.217701] pci_bus 0000:00: resource 0 io: [0x00-0xffff] > [ 0.217703] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] > [ 0.217705] pci_bus 0000:05: resource 0 mem: [0x0-0xfff] > [ 0.217707] pci_bus 0000:0d: resource 0 io: [0x2000-0x2fff] > [ 0.217709] pci_bus 0000:0d: resource 1 mem: [0xe8000000-0xe80fffff] > [ 0.217711] pci_bus 0000:0f: resource 0 io: [0x3000-0x3fff] > [ 0.217713] pci_bus 0000:0f: resource 1 mem: [0xe8100000-0xe81fffff] > [ 0.217715] pci_bus 0000:11: resource 0 io: [0x4000-0x4fff] > [ 0.217717] pci_bus 0000:11: resource 1 mem: [0xe8200000-0xe82fffff] > [ 0.217720] pci_bus 0000:11: resource 2 pref mem [0xe0000000-0xe7ffffff] > [ 0.217722] pci_bus 0000:11: resource 3 io: [0x00-0xffff] > [ 0.217724] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffffffffffff] > [ 0.217777] NET: Registered protocol family 2 > [ 0.218004] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > [ 0.219308] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > [ 0.223602] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.224228] TCP: Hash tables configured (established 524288 bind 65536) > [ 0.224298] TCP reno registered > [ 0.224514] NET: Registered protocol family 1 > [ 0.224638] Unpacking initramfs... > [ 0.405817] Freeing initrd memory: 8764k freed > [ 0.409841] Simple Boot Flag at 0x40 set to 0x80 > [ 0.410269] audit: initializing netlink socket (disabled) > [ 0.410353] type=2000 audit(1260954508.408:1): initialized > [ 0.410847] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.411027] VFS: Disk quotas dquot_6.5.2 > [ 0.411121] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.411239] msgmni has been set to 7930 > [ 0.411450] alg: No test for stdrng (krng) > [ 0.411544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > [ 0.411630] io scheduler noop registered > [ 0.411694] io scheduler anticipatory registered > [ 0.411760] io scheduler deadline registered > [ 0.411840] io scheduler cfq registered (default) > [ 0.412070] pci 0000:11:03.0: Boot video device > [ 0.412218] alloc irq_desc for 24 on node 0 > [ 0.412220] alloc kstat_irqs on node 0 > [ 0.412234] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X > [ 0.412249] pcieport-driver 0000:00:1c.0: setting latency timer to 64 > [ 0.412370] alloc irq_desc for 25 on node 0 > [ 0.412372] alloc kstat_irqs on node 0 > [ 0.412382] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X > [ 0.412393] pcieport-driver 0000:00:1c.4: setting latency timer to 64 > [ 0.412512] alloc irq_desc for 26 on node 0 > [ 0.412514] alloc kstat_irqs on node 0 > [ 0.412524] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X > [ 0.412535] pcieport-driver 0000:00:1c.5: setting latency timer to 64 > [ 0.413596] Linux agpgart interface v0.103 > [ 0.413729] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.414035] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.414555] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.414777] input: Macintosh mouse button emulation as /devices/virtual/input/input0 > [ 0.415004] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 > [ 0.417988] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.418125] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 0.418346] mice: PS/2 mouse device common for all mice > [ 0.418539] rtc_cmos 00:04: RTC can wake from S4 > [ 0.418697] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > [ 0.418868] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > [ 0.419012] cpuidle: using governor ladder > [ 0.419144] cpuidle: using governor menu > [ 0.419278] No iBFT detected. > [ 0.419646] TCP cubic registered > [ 0.419820] NET: Registered protocol family 10 > [ 0.420289] lo: Disabled Privacy Extensions > [ 0.420626] Mobile IPv6 > [ 0.420756] NET: Registered protocol family 17 > [ 0.420947] registered taskstats version 1 > [ 0.421193] rtc_cmos 00:04: setting system clock to 2009-12-16 09:08:29 UTC (1260954509) > [ 0.421385] Freeing unused kernel memory: 648k freed > [ 0.421731] Write protecting the kernel read-only data: 4028k > [ 0.543565] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.543778] alloc irq_desc for 18 on node 0 > [ 0.543781] alloc kstat_irqs on node 0 > [ 0.543790] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 0.543949] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > [ 0.543955] ehci_hcd 0000:00:1a.7: EHCI Host Controller > [ 0.544161] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > [ 0.548293] ehci_hcd 0000:00:1a.7: debug port 1 > [ 0.548441] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported > [ 0.548467] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8501800 > [ 0.565315] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > [ 0.565485] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 0.565622] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.565773] usb usb1: Product: EHCI Host Controller > [ 0.565907] usb usb1: Manufacturer: Linux 2.6.31-1-amd64 ehci_hcd > [ 0.566034] usb usb1: SerialNumber: 0000:00:1a.7 > [ 0.566215] usb usb1: configuration #1 chosen from 1 choice > [ 0.566368] hub 1-0:1.0: USB hub found > [ 0.566500] hub 1-0:1.0: 6 ports detected > [ 0.566955] SCSI subsystem initialized > [ 0.582520] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 > [ 0.582662] e1000e: Copyright (c) 1999-2008 Intel Corporation. > [ 0.585126] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.585437] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.585601] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 0.585608] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 0.585799] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > [ 0.589866] ehci_hcd 0000:00:1d.7: debug port 1 > [ 0.590014] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > [ 0.590043] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xe8501c00 > [ 0.611270] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 0.611448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > [ 0.611583] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.611735] usb usb2: Product: EHCI Host Controller > [ 0.611869] usb usb2: Manufacturer: Linux 2.6.31-1-amd64 ehci_hcd > [ 0.612001] usb usb2: SerialNumber: 0000:00:1d.7 > [ 0.612194] usb usb2: configuration #1 chosen from 1 choice > [ 0.612427] hub 2-0:1.0: USB hub found > [ 0.632774] libata version 3.00 loaded. > [ 0.634051] hub 2-0:1.0: 6 ports detected > [ 0.637524] e1000e 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.637664] e1000e 0000:0d:00.0: pci_enable_pcie_error_reporting failed 0xfffffffb > [ 0.637828] e1000e 0000:0d:00.0: setting latency timer to 64 > [ 0.638184] alloc irq_desc for 27 on node 0 > [ 0.638186] alloc kstat_irqs on node 0 > [ 0.638221] e1000e 0000:0d:00.0: irq 27 for MSI/MSI-X > [ 0.638564] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.638706] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > [ 0.638712] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 0.638931] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > [ 0.639118] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 > [ 0.639283] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 0.639412] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.639563] usb usb3: Product: UHCI Host Controller > [ 0.639696] usb usb3: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd > [ 0.639828] usb usb3: SerialNumber: 0000:00:1a.0 > [ 0.640032] usb usb3: configuration #1 chosen from 1 choice > [ 0.640214] hub 3-0:1.0: USB hub found > [ 0.640383] hub 3-0:1.0: 2 ports detected > [ 0.640580] ahci 0000:00:1f.2: version 3.0 > [ 0.640592] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.640746] alloc irq_desc for 28 on node 0 > [ 0.640747] alloc kstat_irqs on node 0 > [ 0.640757] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X > [ 0.640828] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x35 impl SATA mode > [ 0.640982] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part > [ 0.641131] ahci 0000:00:1f.2: setting latency timer to 64 > [ 0.641372] scsi0 : ahci > [ 0.641646] scsi1 : ahci > [ 0.641860] scsi2 : ahci > [ 0.642071] scsi3 : ahci > [ 0.642282] scsi4 : ahci > [ 0.642512] scsi5 : ahci > [ 0.642799] ata1: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501100 irq 28 > [ 0.642947] ata2: DUMMY > [ 0.643076] ata3: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501200 irq 28 > [ 0.643228] ata4: DUMMY > [ 0.643353] ata5: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501300 irq 28 > [ 0.643505] ata6: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501380 irq 28 > [ 0.643806] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.643954] uhci_hcd 0000:00:1a.1: setting latency timer to 64 > [ 0.643961] uhci_hcd 0000:00:1a.1: UHCI Host Controller > [ 0.644162] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > [ 0.644361] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840 > [ 0.644534] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 0.644671] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.644814] usb usb4: Product: UHCI Host Controller > [ 0.644947] usb usb4: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd > [ 0.645082] usb usb4: SerialNumber: 0000:00:1a.1 > [ 0.645287] usb usb4: configuration #1 chosen from 1 choice > [ 0.645468] hub 4-0:1.0: USB hub found > [ 0.645599] hub 4-0:1.0: 2 ports detected > [ 0.645804] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 0.645945] uhci_hcd 0000:00:1a.2: setting latency timer to 64 > [ 0.645951] uhci_hcd 0000:00:1a.2: UHCI Host Controller > [ 0.646137] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 > [ 0.646308] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860 > [ 0.646472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 0.646606] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.646761] usb usb5: Product: UHCI Host Controller > [ 0.646894] usb usb5: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd > [ 0.647029] usb usb5: SerialNumber: 0000:00:1a.2 > [ 0.647228] usb usb5: configuration #1 chosen from 1 choice > [ 0.647409] hub 5-0:1.0: USB hub found > [ 0.647538] hub 5-0:1.0: 2 ports detected > [ 0.647734] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.647878] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 0.647884] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 0.648070] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 > [ 0.648243] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001880 > [ 0.648401] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > [ 0.648527] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.648674] usb usb6: Product: UHCI Host Controller > [ 0.648807] usb usb6: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd > [ 0.648938] usb usb6: SerialNumber: 0000:00:1d.0 > [ 0.649139] usb usb6: configuration #1 chosen from 1 choice > [ 0.649317] hub 6-0:1.0: USB hub found > [ 0.649454] hub 6-0:1.0: 2 ports detected > [ 0.649641] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.649785] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 0.649792] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 0.649980] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 > [ 0.650158] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 > [ 0.650326] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > [ 0.650463] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.650613] usb usb7: Product: UHCI Host Controller > [ 0.650750] usb usb7: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd > [ 0.650887] usb usb7: SerialNumber: 0000:00:1d.1 > [ 0.651105] usb usb7: configuration #1 chosen from 1 choice > [ 0.651286] hub 7-0:1.0: USB hub found > [ 0.651417] hub 7-0:1.0: 2 ports detected > [ 0.651808] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 0.651949] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 0.651956] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 0.652149] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 > [ 0.652384] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 > [ 0.652537] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 > [ 0.652674] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 0.652826] usb usb8: Product: UHCI Host Controller > [ 0.652959] usb usb8: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd > [ 0.653090] usb usb8: SerialNumber: 0000:00:1d.2 > [ 0.653291] usb usb8: configuration #1 chosen from 1 choice > [ 0.653458] hub 8-0:1.0: USB hub found > [ 0.653593] hub 8-0:1.0: 2 ports detected > [ 0.693411] e1000e 0000:0d:00.0: Warning: detected DSPD enabled in EEPROM > [ 0.710997] Switched to high resolution mode on CPU 1 > [ 0.712782] Switched to high resolution mode on CPU 0 > [ 0.753027] 0000:0d:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:e0:81:b2:63:ae > [ 0.753183] 0000:0d:00.0: eth0: Intel(R) PRO/1000 Network Connection > [ 0.753341] 0000:0d:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff > [ 0.753639] e1000e 0000:0f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 0.753776] e1000e 0000:0f:00.0: pci_enable_pcie_error_reporting failed 0xfffffffb > [ 0.753936] e1000e 0000:0f:00.0: setting latency timer to 64 > [ 0.754288] alloc irq_desc for 29 on node 0 > [ 0.754289] alloc kstat_irqs on node 0 > [ 0.754322] e1000e 0000:0f:00.0: irq 29 for MSI/MSI-X > [ 0.808887] e1000e 0000:0f:00.0: Warning: detected DSPD enabled in EEPROM > [ 0.869812] 0000:0f:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:e0:81:b2:63:af > [ 0.869960] 0000:0f:00.0: eth1: Intel(R) PRO/1000 Network Connection > [ 0.870125] 0000:0f:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff > [ 1.109044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.109203] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 1.109361] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.109501] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.110207] ata1.00: ATA-8: STM3500418AS, CC38, max UDMA/133 > [ 1.110347] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) > [ 1.110533] ata6.00: ATA-6: ST31000340NS, SN04, max UDMA/133 > [ 1.110556] ata3.00: ATA-8: STM3500418AS, CC38, max UDMA/133 > [ 1.110560] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) > [ 1.110651] ata5.00: ATA-8: ST3500418AS, CC37, max UDMA/133 > [ 1.110655] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) > [ 1.111173] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) > [ 1.111739] ata1.00: configured for UDMA/133 > [ 1.111915] ata5.00: configured for UDMA/133 > [ 1.112130] scsi 0:0:0:0: Direct-Access ATA STM3500418AS CC38 PQ: 0 ANSI: 5 > [ 1.112402] ata3.00: configured for UDMA/133 > [ 1.112574] scsi 2:0:0:0: Direct-Access ATA STM3500418AS CC38 PQ: 0 ANSI: 5 > [ 1.112837] scsi 4:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5 > [ 1.113016] ata6.00: configured for UDMA/133 > [ 1.113317] scsi 5:0:0:0: Direct-Access ATA ST31000340NS SN04 PQ: 0 ANSI: 5 > [ 1.117925] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) > [ 1.118118] sd 0:0:0:0: [sda] Write Protect is off > [ 1.118212] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) > [ 1.118246] sd 2:0:0:0: [sdb] Write Protect is off > [ 1.118248] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 1.118266] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 1.118367] sdb: > [ 1.118506] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) > [ 1.118539] sd 4:0:0:0: [sdc] Write Protect is off > [ 1.118541] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > [ 1.118559] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 1.118644] sdc: > [ 1.118682] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > [ 1.118714] sd 5:0:0:0: [sdd] Write Protect is off > [ 1.118715] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > [ 1.118733] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 1.118817] sdd: > [ 1.119900] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.120061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 1.120316] sda: sdb1 sdb2 sdb3 sdb4 > [ 1.124658] sdc1 sdc2 sdc3 sdc4 > [ 1.128885] sda1 sda2 sda3 sda4 > [ 1.132101] sd 2:0:0:0: [sdb] Attached SCSI disk > [ 1.137104] sd 0:0:0:0: [sda] Attached SCSI disk > [ 1.138174] sdd1 > [ 1.138628] sd 5:0:0:0: [sdd] Attached SCSI disk > [ 1.138642] sd 4:0:0:0: [sdc] Attached SCSI disk > [ 1.229141] usb 4-1: new low speed USB device using uhci_hcd and address 2 > [ 1.355926] xor: automatically using best checksumming function: generic_sse > [ 1.373000] generic_sse: 8803.000 MB/sec > [ 1.373130] xor: using function: generic_sse (8803.000 MB/sec) > [ 1.373649] async_tx: api initialized (async) > [ 1.441008] raid6: int64x1 2012 MB/s > [ 1.509010] raid6: int64x2 2714 MB/s > [ 1.577022] raid6: int64x4 2105 MB/s > [ 1.645008] raid6: int64x8 1902 MB/s > [ 1.713008] raid6: sse2x1 3586 MB/s > [ 1.781009] raid6: sse2x2 4780 MB/s > [ 1.849006] raid6: sse2x4 7166 MB/s > [ 1.849137] raid6: using algorithm sse2x4 (7166 MB/s) > [ 1.854700] md: raid6 personality registered for level 6 > [ 1.854821] md: raid5 personality registered for level 5 > [ 1.854959] md: raid4 personality registered for level 4 > [ 1.917405] md: md1 stopped. > [ 1.919576] md: bind > [ 1.920694] md: bind > [ 1.921040] md: bind > [ 1.922546] raid5: device sdc2 operational as raid disk 0 > [ 1.922672] raid5: device sda2 operational as raid disk 2 > [ 1.922798] raid5: device sdb2 operational as raid disk 1 > [ 1.923184] raid5: allocated 3228kB for md1 > [ 1.923342] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 > [ 1.923490] RAID5 conf printout: > [ 1.923612] --- rd:3 wd:3 > [ 1.923730] disk 0, o:1, dev:sdc2 > [ 1.923853] disk 1, o:1, dev:sdb2 > [ 1.923979] disk 2, o:1, dev:sda2 > [ 1.924137] md1: detected capacity change from 0 to 107389124608 > [ 1.925244] md1: unknown partition table > [ 2.192846] EXT4-fs (md1): barriers enabled > [ 2.205256] kjournald2 starting: pid 453, dev md1:8, commit interval 5 seconds > [ 2.205431] EXT4-fs (md1): delayed allocation enabled > [ 2.205766] EXT4-fs: file extents enabled > [ 2.211754] EXT4-fs: mballoc enabled > [ 2.211888] EXT4-fs (md1): mounted filesystem with ordered data mode > [ 2.616988] usb 4-1: New USB device found, idVendor=0463, idProduct=ffff > [ 2.617107] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4 > [ 2.617251] usb 4-1: Product: Ellipse MAX > [ 2.617393] usb 4-1: Manufacturer: MGE UPS SYSTEMS > [ 2.617526] usb 4-1: SerialNumber: PbAc > [ 2.617714] usb 4-1: configuration #1 chosen from 1 choice > [ 2.857060] usb 4-2: new low speed USB device using uhci_hcd and address 3 > [ 3.035075] usb 4-2: New USB device found, idVendor=0b05, idProduct=172e > [ 3.035215] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 3.035366] usb 4-2: Product: ASUS DH Remote > [ 3.035490] usb 4-2: Manufacturer: T-wins > [ 3.035695] usb 4-2: configuration #1 chosen from 1 choice > [ 3.277060] usb 7-1: new full speed USB device using uhci_hcd and address 2 > [ 3.432944] usb 7-1: New USB device found, idVendor=0c76, idProduct=1607 > [ 3.432947] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > [ 3.432949] usb 7-1: Product: USB Headphone Set > [ 3.433031] usb 7-1: configuration #1 chosen from 1 choice > [ 3.882407] udev: starting version 149 > [ 4.769077] usbcore: registered new interface driver hiddev > [ 4.838933] ACPI: SSDT 00000000dfed6348 00261 (v01 PmRef Cpu0Ist 00003000 INTL 20050228) > [ 4.840030] ACPI: SSDT 00000000dfed5a8d 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) > [ 4.842990] input: PC Speaker as /devices/platform/pcspkr/input/input1 > [ 4.877048] Monitor-Mwait will be used to enter C-1 state > [ 4.877111] processor LNXCPU:00: registered as cooling_device0 > [ 4.877248] ACPI: Processor [CPU0] (supports 8 throttling states) > [ 4.878127] ACPI: SSDT 00000000dfed65a9 001F2 (v01 PmRef Cpu1Ist 00003000 INTL 20050228) > [ 4.878814] ACPI: SSDT 00000000dfed5fa5 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228) > [ 4.879928] processor LNXCPU:01: registered as cooling_device1 > [ 4.880064] ACPI: Processor [CPU1] (supports 8 throttling states) > [ 4.988382] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) > [ 4.988528] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 5.140462] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 > [ 5.140614] ACPI: Power Button [PWRF] > [ 5.140826] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input3 > [ 5.140983] ACPI: Power Button [PWRB] > [ 6.004194] usbcore: registered new interface driver snd-usb-audio > [ 15.029732] /tmp/buildd/linux-2.6-2.6.31/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed > [ 15.029914] generic-usb 0003:0463:FFFF.0001: timeout initializing reports > [ 15.030154] generic-usb 0003:0463:FFFF.0001: hiddev96,hidraw0: USB HID v1.10 Device [MGE UPS SYSTEMS Ellipse MAX] on usb-0000:00:1a.1-1/input0 > [ 15.038933] generic-usb 0003:0B05:172E.0002: hiddev97,hidraw1: USB HID v1.10 Device [T-wins ASUS DH Remote] on usb-0000:00:1a.1-2/input0 > [ 15.042580] input: USB Headphone Set as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.3/input/input4 > [ 15.042728] generic-usb 0003:0C76:1607.0003: input,hidraw2: USB HID v1.00 Device [USB Headphone Set] on usb-0000:00:1d.1-1/input3 > [ 15.042833] usbcore: registered new interface driver usbhid > [ 15.042901] usbhid: v2.6:USB HID core driver > [ 16.349451] EXT4-fs (md1): internal journal on md1:8 > [ 16.539171] Uniform Multi-Platform E-IDE driver > [ 16.568786] ide-cd driver 5.00 > [ 16.624522] md: raid1 personality registered for level 1 > [ 16.688036] ipmi message handler version 39.2 > [ 16.710460] IPMI System Interface driver. > [ 16.710635] ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0x0, slave address 0x20, irq 0 > [ 16.710794] Could not set up I/O space > [ 16.745054] ipmi_si: Unable to find any System Interface(s) > [ 16.778633] coretemp coretemp.0: Using relative temperature scale! > [ 16.778811] coretemp coretemp.1: Using relative temperature scale! > [ 16.921046] i2c-adapter i2c-0: Found a SCH5027 chip at 0x2e (rev 0x69). > [ 16.937109] dme1737 0-002e: Optional features: pwm3=yes, pwm5=no, pwm6=no, fan3=yes, fan4=yes, fan5=no, fan6=no. > [ 16.983482] device-mapper: uevent: version 1.0.3 > [ 17.019092] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com > [ 17.327553] md: md0 stopped. > [ 17.373921] md: bind > [ 17.374217] md: bind > [ 17.374488] md: bind > [ 17.375864] raid1: raid set md0 active with 3 out of 3 mirrors > [ 17.376019] md0: detected capacity change from 0 to 542769152 > [ 17.377340] md0: unknown partition table > [ 17.495121] md: md2 stopped. > [ 17.521017] md: bind > [ 17.521290] md: bind > [ 17.521517] md: bind > [ 17.526932] raid5: device sdc4 operational as raid disk 0 > [ 17.527047] raid5: device sda4 operational as raid disk 2 > [ 17.527174] raid5: device sdb4 operational as raid disk 1 > [ 17.527580] raid5: allocated 3228kB for md2 > [ 17.548041] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 > [ 17.548193] RAID5 conf printout: > [ 17.548324] --- rd:3 wd:3 > [ 17.548451] disk 0, o:1, dev:sdc4 > [ 17.548581] disk 1, o:1, dev:sdb4 > [ 17.548708] disk 2, o:1, dev:sda4 > [ 17.548872] md2: detected capacity change from 0 to 883131678720 > [ 17.550192] md2: unknown partition table > [ 18.433582] kjournald starting. Commit interval 5 seconds > [ 18.459987] EXT3 FS on md0, internal journal > [ 18.460228] EXT3-fs: mounted filesystem with ordered data mode. > [ 18.472750] EXT4-fs (md2): barriers enabled > [ 18.473276] kjournald2 starting: pid 2105, dev md2:8, commit interval 5 seconds > [ 18.508402] EXT4-fs (md2): internal journal on md2:8 > [ 18.508759] EXT4-fs (md2): delayed allocation enabled > [ 18.509097] EXT4-fs: file extents enabled > [ 18.549014] EXT4-fs: mballoc enabled > [ 18.549158] EXT4-fs (md2): mounted filesystem with ordered data mode > [ 19.144714] NET: Registered protocol family 15 > [ 19.185895] alg: No test for cipher_null (cipher_null-generic) > [ 19.186098] alg: No test for ecb(cipher_null) (ecb-cipher_null) > [ 19.186249] alg: No test for digest_null (digest_null-generic) > [ 19.186392] alg: No test for compress_null (compress_null-generic) > [ 19.231656] padlock: VIA PadLock Hash Engine not detected. > [ 19.290450] padlock: VIA PadLock Hash Engine not detected. > [ 19.332886] padlock: VIA PadLock not detected. > [ 19.388573] Intel AES-NI instructions are not detected. > [ 21.104592] e1000e 0000:0d:00.0: irq 27 for MSI/MSI-X > [ 21.160215] e1000e 0000:0d:00.0: irq 27 for MSI/MSI-X > [ 21.161362] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 21.492599] JBD: barrier-based sync failed on md1:8 - disabling barriers > [ 21.673162] RPC: Registered udp transport module. > [ 21.673291] RPC: Registered tcp transport module. > [ 21.721900] Slow work thread pool: Starting up > [ 21.744076] Slow work thread pool: Ready > [ 21.744256] FS-Cache: Loaded > [ 21.790627] FS-Cache: Netfs 'nfs' registered for caching > [ 21.925374] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > [ 22.186919] ttyS1: LSR safety check engaged! > [ 22.187525] ttyS1: LSR safety check engaged! > [ 23.538992] SMsC 37B787 watchdog component driver 1.1 initialising... > [ 23.540257] smsc37b787_wdt: Timeout set to 60 second(s). > [ 23.540385] smsc37b787_wdt: Watchdog initialized and sleeping (nowayout=0)... > [ 25.466263] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > [ 27.817247] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX > [ 27.818583] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 33.566372] lp: driver loaded but no devices found > [ 33.597855] ppdev: user-space parallel port driver > [ 36.841378] svc: failed to register lockdv1 RPC service (errno 97). > [ 36.842221] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory > [ 36.856897] NFSD: starting 90-second grace period > [ 38.393408] eth0: no IPv6 routers present > [ 40.527714] JBD: barrier-based sync failed on md2:8 - disabling barriers > [ 94.384626] e1000e 0000:0f:00.0: irq 29 for MSI/MSI-X > [ 94.440188] e1000e 0000:0f:00.0: irq 29 for MSI/MSI-X > [ 94.441496] ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 94.585688] PPP generic driver version 2.4.2 > [ 98.806893] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None > [ 98.807049] 0000:0f:00.0: eth1: 10/100 speed: disabling TSO > [ 98.807867] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > [ 99.869818] NET: Registered protocol family 24 > [ 101.968714] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 101.969167] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > [ 101.969322] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or > [ 101.969469] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > [ 102.117949] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 109.317030] eth1: no IPv6 routers present > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/