Subject: Re: No PCI-X / PCI-E cards ...
From: Xavier Bestel <xavier.bestel@free.fr>
To: Roland Dreier <rdreier@cisco.com>
Cc: linux-kernel@vger.kernel.org
In-Reply-To: <1261477857.22127.23.camel@skunk>
References: <1260979057.23135.70.camel@skunk> <1261089592.8827.5.camel@bip>
	 <adahbrp43x7.fsf@roland-alpha.cisco.com>  <1261477857.22127.23.camel@skunk>
Content-Type: text/plain
Date: Wed, 23 Dec 2009 14:04:41 +0100
Message-Id: <1261573481.4822.14.camel@skunk>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1195
Lines: 34

On Tue, 2009-12-22 at 11:30 +0100, Xavier Bestel wrote:
> On Thu, 2009-12-17 at 14:43 -0800, Roland Dreier wrote:
> > > [    0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource
> > 
> > When does this message appear?  Does it matter if the PCIe card is
> > installed or not?  This 0000:00:1c.0 device is:
> > 
> > > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
> > 
> > so it might be relevant.
> > 
> > Did you try all the PCIe slots?
> 
> I tried another slot, and it gave the same error:
> [    0.203279] PCI: Using ACPI for IRQ routing
> [    0.203279] pci 0000:00:1c.0: BAR 13: can't allocate resource
> 
> And the card still isn't visible through lspci.
> 
> How comes the kernel can't see that card ?

It looks like if the board has been flashed with the wrong bios (the
dmidecode info isn't consistent with what I see on the board).
Is there a way to workaround that in the kernel ?

	Xav


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/