Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752458AbZL1XTB (ORCPT ); Mon, 28 Dec 2009 18:19:01 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751899AbZL1XTB (ORCPT ); Mon, 28 Dec 2009 18:19:01 -0500 Received: from smtp-out4.blueyonder.co.uk ([195.188.213.7]:37169 "EHLO smtp-out4.blueyonder.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751653AbZL1XS7 (ORCPT ); Mon, 28 Dec 2009 18:18:59 -0500 Message-ID: <4B393CDF.5040404@blueyonder.co.uk> Date: Mon, 28 Dec 2009 23:18:55 +0000 From: Sid Boyce Reply-To: sboyce@blueyonder.co.uk Organization: blueyonder.co.uk User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-GB; rv:1.9.1.5) Gecko/20091130 SUSE/3.0.0-1.2 Thunderbird/3.0 ThunderBrowse/3.2.6.8 MIME-Version: 1.0 To: Len Brown CC: linux-kernel@vger.kernel.org Subject: Re: All kernels after 2.6.32-git10 show only 1 CPU ** NOT Fixed in 2.6.33-rc2 either ** References: <4B324B76.9020901@blueyonder.co.uk> <4B33670C.7050503@blueyonder.co.uk> <4B341149.9010106@blueyonder.co.uk> <4B363EEE.8020108@blueyonder.co.uk> <4B37F16D.1040000@blueyonder.co.uk> <4B37F3F8.5000108@blueyonder.co.uk> <4B38C3AF.1060509@blueyonder.co.uk> In-Reply-To: <4B38C3AF.1060509@blueyonder.co.uk> Content-Type: multipart/mixed; boundary="------------010009030407040607060803" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 38429 Lines: 787 This is a multi-part message in MIME format. --------------010009030407040607060803 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit This dmesg is from a freshly built 2.6.32. The following do not appear in later 2.6.32-git or 2.6.33-rc kernels. # grep LAPIC /DMESG_2.6.32_tindog ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1] Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks --------------010009030407040607060803 Content-Type: text/plain; name="DMESG_2.6.32_tindog" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="DMESG_2.6.32_tindog" Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-smp (root@tindog) (gcc version 4.4.2 [gcc-4_4-branch revision 154496] (SUSE Linux) ) #1 SMP Mon Dec 28 15:48:48 GMT 2009 Command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD10EAVS-32_WD-WCAU46493538-part1 resume=/dev/disk/by-id/scsi-SATA_WDC_WD10EAVS-32_WD-WCAU46493538-part3 splash=silent vga=0x31a 3 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) DMI 2.4 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x120000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00C0000000 mask FFE0000000 write-back 3 base 00DFF00000 mask FFFFF00000 uncachable 4 base 0100000000 mask FFE0000000 write-back 5 disabled 6 disabled 7 disabled TOM2: 0000000120000000 aka 4608M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009f000 (usable) modified: 000000000009f000 - 00000000000a0000 (reserved) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000dfee0000 (usable) modified: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data) modified: 00000000dfef0000 - 00000000dff00000 (reserved) modified: 00000000f0000000 - 00000000f4000000 (reserved) modified: 00000000fec00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000120000000 (usable) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000dfee0000 0000000000 - 00dfe00000 page 2M 00dfe00000 - 00dfee0000 page 4k kernel direct mapping tables up to dfee0000 @ 10000-16000 init_memory_mapping: 0000000100000000-0000000120000000 0100000000 - 0120000000 page 2M kernel direct mapping tables up to 120000000 @ 14000-1a000 RAMDISK: 36c13000 - 37fef3ff ACPI: RSDP 00000000000f7da0 00024 (v02 Nvidia) ACPI: XSDT 00000000dfee3100 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: FACP 00000000dfeeb080 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: DSDT 00000000dfee3280 07DAC (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) ACPI: FACS 00000000dfee0000 00040 ACPI: HPET 00000000dfeeb2c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) ACPI: MCFG 00000000dfeeb340 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: APIC 00000000dfeeb1c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-0000000120000000 Bootmem setup node 0 0000000000000000-0000000120000000 NODE_DATA [0000000000015000 - 0000000000029fff] bootmap [000000000002a000 - 000000000004dfff] pages 24 (8 early reservations) ==> bootmem [0000000000 - 0120000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001b861a4] TEXT DATA BSS ==> [0001000000 - 0001b861a4] #3 [0036c13000 - 0037fef3ff] RAMDISK ==> [0036c13000 - 0037fef3ff] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0001b87000 - 0001b8715d] BRK ==> [0001b87000 - 0001b8715d] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00120000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000dfee0 0: 0x00100000 -> 0x00120000 On node 0 totalpages: 1048175 DMA zone: 56 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3822 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 898840 pages, LIFO batch:31 Normal zone: 1792 pages used for memmap Normal zone: 129280 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfefff000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000 PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000 PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) Booting paravirtualized kernel on bare hardware NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880028200000 s89560 r8192 d21032 u524288 pcpu-alloc: s89560 r8192 d21032 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031942 Policy zone: Normal Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD10EAVS-32_WD-WCAU46493538-part1 resume=/dev/disk/by-id/scsi-SATA_WDC_WD10EAVS-32_WD-WCAU46493538-part3 splash=silent vga=0x31a 3 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 0 size 32 MB Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 4034856k/4718592k available (3200k kernel code, 525892k absent, 157844k reserved, 3583k data, 1572k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 3013.546 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.09 BogoMIPS (lpj=3013546) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 00dff00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 16288 entries in 64 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6026.98 BogoMIPS (lpj=3013490) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 Brought up 2 CPUs Total of 2 processors activated (12054.07 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 devtmpfs: initialized NET: Registered protocol family 16 node 0 link 0: io port [b000, ffff] TOM: 00000000e0000000 aka 3584M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f4000000, fe02ffff] node 0 link 0: mmio [f0000000, f03fffff] TOM2: 0000000120000000 aka 4608M bus: [00,03] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [e0000000, f3ffffff] bus: 00 index 3 mmio: [f4000000, ffffffff] bus: 00 index 4 mmio: [120000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:09.1: reg 20 io port: [0x1c00-0x1c3f] pci 0000:00:09.1: reg 24 io port: [0x1c40-0x1c7f] pci 0000:00:09.1: PME# supported from D3hot D3cold pci 0000:00:09.1: PME# disabled pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0a.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] pci 0000:00:0a.1: supports D1 D2 pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0c.0: reg 20 io port: [0xfd00-0xfd0f] pci 0000:00:0d.0: reg 10 io port: [0x9f0-0x9f7] pci 0000:00:0d.0: reg 14 io port: [0xbf0-0xbf3] pci 0000:00:0d.0: reg 18 io port: [0x970-0x977] pci 0000:00:0d.0: reg 1c io port: [0xb70-0xb73] pci 0000:00:0d.0: reg 20 io port: [0xf800-0xf80f] pci 0000:00:0d.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] pci 0000:00:0d.1: reg 10 io port: [0x9e0-0x9e7] pci 0000:00:0d.1: reg 14 io port: [0xbe0-0xbe3] pci 0000:00:0d.1: reg 18 io port: [0x960-0x967] pci 0000:00:0d.1: reg 1c io port: [0xb60-0xb63] pci 0000:00:0d.1: reg 20 io port: [0xf300-0xf30f] pci 0000:00:0d.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] pci 0000:00:0d.2: reg 10 io port: [0xf200-0xf207] pci 0000:00:0d.2: reg 14 io port: [0xf100-0xf103] pci 0000:00:0d.2: reg 18 io port: [0xf000-0xf007] pci 0000:00:0d.2: reg 1c io port: [0xef00-0xef03] pci 0000:00:0d.2: reg 20 io port: [0xee00-0xee0f] pci 0000:00:0d.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] pci 0000:00:0e.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] pci 0000:00:0e.1: PME# supported from D3hot D3cold pci 0000:00:0e.1: PME# disabled pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbfe0000-0xfbffffff] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff] pci 0000:00:04.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] pci 0000:00:04.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:02:07.0: reg 10 io port: [0xcc00-0xccff] pci 0000:02:07.0: reg 14 32bit mmio: [0xfdfff000-0xfdfff0ff] pci 0000:02:07.0: reg 30 32bit mmio pref: [0xfdfc0000-0xfdfdffff] pci 0000:02:07.0: supports D1 D2 pci 0000:02:07.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:07.0: PME# disabled pci 0000:02:0b.0: reg 10 32bit mmio: [0xfdffe000-0xfdffe7ff] pci 0000:02:0b.0: reg 14 32bit mmio: [0xfdff8000-0xfdffbfff] pci 0000:02:0b.0: supports D1 D2 pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:0b.0: PME# disabled pci 0000:00:0e.0: transparent bridge pci 0000:00:0e.0: bridge io port: [0xc000-0xcfff] pci 0000:00:0e.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdeff000-0xfdeff07f] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdef8000-0xfdefbfff] pci 0000:03:00.0: reg 20 io port: [0xbc00-0xbc7f] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfde00000-0xfde7ffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:16.0: bridge io port: [0xb000-0xbfff] pci 0000:00:16.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1080-0x10ff has been reserved system 00:01: ioport range 0x1400-0x147f has been reserved system 00:01: ioport range 0x1480-0x14ff has been reserved system 00:01: ioport range 0x1800-0x187f has been reserved system 00:01: ioport range 0x1880-0x18ff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:0d: iomem range 0xcd200-0xcffff has been reserved system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved system 00:0d: iomem range 0xfc000-0xfffff could not be reserved system 00:0d: iomem range 0xfefff000-0xfefff0ff has been reserved system 00:0d: iomem range 0xdfee0000-0xdfefffff could not be reserved system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0x100000-0xdfedffff could not be reserved system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reserved system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved pci 0000:02:07.0: BAR 6: address space collision on of device [0xfdfc0000-0xfdfdffff] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 pci 0000:00:04.0: IO window: 0xd000-0xdfff pci 0000:00:04.0: MEM window: 0xf8000000-0xfbffffff pci 0000:00:04.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0e.0: IO window: 0xc000-0xcfff pci 0000:00:0e.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:00:0e.0: PREFETCH window: 0xf4000000-0xf40fffff pci 0000:00:16.0: PCI bridge, secondary bus 0000:03 pci 0000:00:16.0: IO window: 0xb000-0xbfff pci 0000:00:16.0: MEM window: 0xfde00000-0xfdefffff pci 0000:00:16.0: PREFETCH window: disabled pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:00:16.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] pci_bus 0000:02: resource 2 pref mem [0xf4000000-0xf40fffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.1: Enabling HT MSI Mapping pci 0000:00:0d.2: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.1: Enabling HT MSI Mapping pci 0000:00:16.0: Enabling HT MSI Mapping pci 0000:01:00.0: Boot video device Unpacking initramfs... Freeing initrd memory: 20336k freed PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1262039045.577:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7920 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 24 for MSI/MSI-X pcieport 0000:00:04.0: setting latency timer to 64 pcieport 0000:00:16.0: irq 25 for MSI/MSI-X pcieport 0000:00:16.0: setting latency timer to 64 vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90005180000, using 5120k, total 14336k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device XENFS: not registering filesystem on non-xen platform Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A kgdb: Registered I/O driver kgdbts. kgdbts:RUN plant and detach test kgdbts:RUN sw breakpoint test kgdbts:RUN bad memory access test kgdbts:RUN singlestep test 1000 iterations kgdbts:RUN singlestep [0/1000] kgdbts:RUN singlestep [100/1000] kgdbts:RUN singlestep [200/1000] kgdbts:RUN singlestep [300/1000] kgdbts:RUN singlestep [400/1000] kgdbts:RUN singlestep [500/1000] kgdbts:RUN singlestep [600/1000] kgdbts:RUN singlestep [700/1000] kgdbts:RUN singlestep [800/1000] kgdbts:RUN singlestep [900/1000] kgdbts:RUN hw breakpoint test kgdbts:RUN hw write breakpoint test kgdbts:RUN access write breakpoint test kgdbts:RUN do_fork for 100 breakpoints PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 kmemleak: Kernel memory leak detector initialized kmemleak: Automatic memory scanning thread started Freeing unused kernel memory: 1572k freed Write protecting the kernel read-only data: 4932k Testing CPA: undo ffffffff81009000-ffffffff814da000 Testing CPA: again processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012) ACPI: Expecting a [Reference] package element, found type 0 ACPI: Invalid passive threshold thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) Uniform Multi-Platform E-IDE driver amd74xx 0000:00:0c.0: UDMA133 controller amd74xx 0000:00:0c.0: IDE controller (0x10de:0x036e rev 0xa1) amd74xx 0000:00:0c.0: IDE port disabled amd74xx 0000:00:0c.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfd00-0xfd07 Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 SCSI subsystem initialized libata version 3.00 loaded. sata_nv 0000:00:0d.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:0d.0: Using SWNCQ mode sata_nv 0000:00:0d.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:0d.1: Using SWNCQ mode sata_nv 0000:00:0d.1: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22 ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:0d.2: Using SWNCQ mode sata_nv 0000:00:0d.2: setting latency timer to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 21 ata6: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 21 ata3: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD10EAVS-32D7B1, 01.01A01, max UDMA/133 ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD10EAVS-32D 01.0 PQ: 0 ANSI: 5 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7: MAXTOR STM3500630AS, 3.AAE, max UDMA/133 ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA MAXTOR STM350063 3.AA PQ: 0 ANSI: 5 ata4: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) fan PNP0C0B:00: registered as cooling_device2 ACPI: Fan [FAN] (on) SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem JFS: nTxBlock = 8192, nTxLock = 65536 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found udev: starting version 149 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sdb: sda1 sda2 sda3 sdb1 sdb2 sdb3 usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver sd 1:0:0:0: [sdb] Attached SCSI disk sd 0:0:0:0: [sda] Attached SCSI disk Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs kgdb: Unregistered I/O driver kgdbts, debugger disabled. ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:0a.1: setting latency timer to 64 ehci_hcd 0000:00:0a.1: EHCI Host Controller ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0a.1: debug port 1 ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000 ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-smp ehci_hcd usb usb1: SerialNumber: 0000:00:0a.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:0a.0: setting latency timer to 64 ohci_hcd 0000:00:0a.0: OHCI Host Controller ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-smp ohci_hcd usb usb2: SerialNumber: 0000:00:0a.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected PM: Starting manual resume from disk usb 1-4: new high speed USB device using ehci_hcd and address 3 XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 usb 1-4: New USB device found, idVendor=046d, idProduct=0990 usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2 usb 1-4: SerialNumber: 7BBC20E7 usb 1-4: configuration #1 chosen from 1 choice usb 1-9: new high speed USB device using ehci_hcd and address 4 usb 1-9: New USB device found, idVendor=0bda, idProduct=8187 usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-9: Product: RTL8187_Wireless usb 1-9: Manufacturer: Manufacturer_Realtek_RTL8187_ usb 1-9: SerialNumber: 0015AF230437 usb 1-9: configuration #1 chosen from 1 choice usb 2-2: new low speed USB device using ohci_hcd and address 2 usb 2-2: New USB device found, idVendor=046d, idProduct=c404 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Trackball usb 2-2: Manufacturer: Logitech usb 2-2: configuration #1 chosen from 1 choice udev: starting version 149 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 EDAC MC: Ver: 2.1.0 Dec 28 2009 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 input: PC Speaker as /devices/platform/pcspkr/input/input3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 EDAC amd64_edac: Ver: 3.2.0 Dec 28 2009 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or set 'ecc_enable_override'. Also, use of the override can cause unknown side effects. amd64_edac: probe of 0000:00:18.2 failed with error -22 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 r8169 0000:02:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 r8169 0000:02:07.0: no PCI Express capability eth0: RTL8169sb/8110sb at 0xffffc90000672000, 00:1c:f0:bb:14:e1, XID 10000000 IRQ 17 ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver nForce2_smbus 0000:00:09.1: Error probing SMB1. i2c i2c-0: nForce2 SMBus adapter at 0x1c40 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ohci1394 0000:02:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 kvm: Nested Virtualization enabled ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fdffe000-fdffe7ff] Max Packet=[2048] IR/IT contexts=[4/8] usbcore: registered new interface driver hiddev input: Logitech Trackball as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.0/input/input4 generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:0a.0-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver udev: renamed network interface eth0 to eth_s1_0 Linux video capture interface: v2.00 IT8716 SuperIO detected. parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] cfg80211: Calling CRDA to update world regulatory domain ppdev: user-space parallel port driver uvcvideo: Found UVC 1.00 device (046d:0990) input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:0a.1/usb1/1-4/1-4:1.0/input/input5 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:0e.1: setting latency timer to 64 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800015a4fb7] usbcore: registered new interface driver snd-usb-audio phy0: Selected rate control algorithm 'minstrel' phy0: hwaddr 00:15:af:23:04:37, RTL8187vB (default) V1 + rtl8225z2 rtl8187: Customer ID is 0x00 Registered led device: rtl8187-phy0::tx Registered led device: rtl8187-phy0::rx rtl8187: wireless switch is on usbcore: registered new interface driver rtl8187 i2c /dev entries driver Adding 11004516k swap on /dev/sda3. Priority:-1 extents:1 across:11004516k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com loop: module loaded Btrfs loaded device fsid 8b455ed49c789838-d4076299d5762cad devid 1 transid 960 /dev/sdb1 fuse init (API version 7.13) powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [Firmware Bug]: powernow-k8: Try again with latest BIOS. r8169: eth_s1_0: link up CPA self-test: 4k 3072 large 2042 gb 0 x 2844[ffff880000000000-ffff8800dffff000] miss 131072 4k 171520 large 1713 gb 0 x 48323[ffff880000000000-ffff8800dffff000] miss 131072 4k 171520 large 1713 gb 0 x 48323[ffff880000000000-ffff8800dffff000] miss 131072 ok. it87: Found IT8716F chip at 0x290, revision 0 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver NET: Registered protocol family 17 wlan0: deauthenticating from 00:1b:9e:82:66:27 by local choice (reason=3) wlan0: direct probe to AP 00:1b:9e:82:66:27 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:1b:9e:82:66:27 (try 1) wlan0: authenticated wlan0: associate with AP 00:1b:9e:82:66:27 (try 1) wlan0: RX AssocResp from 00:1b:9e:82:66:27 (capab=0x411 status=0 aid=4) wlan0: associated NET: Registered protocol family 10 lo: Disabled Privacy Extensions Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized wlan0: no IPv6 routers present eth_s1_0: no IPv6 routers present kmemleak: 655 new suspected memory leaks (see /sys/kernel/debug/kmemleak) nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.30 Fri Dec 18 16:14:43 PST 2009 --------------010009030407040607060803-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/