Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755380Ab0AEVR4 (ORCPT ); Tue, 5 Jan 2010 16:17:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755299Ab0AEVRz (ORCPT ); Tue, 5 Jan 2010 16:17:55 -0500 Received: from ch-smtp03.sth.basefarm.net ([80.76.149.214]:60962 "EHLO ch-smtp03.sth.basefarm.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755243Ab0AEVRx (ORCPT ); Tue, 5 Jan 2010 16:17:53 -0500 X-Mailer: exmh version 2.7.2 04/02/2003 (gentoo 2.7.2) with nmh-1.3-dev To: Yinghai Lu cc: Anders Eriksson , mingo@elte.hu, linux-kernel@vger.kernel.org Subject: Re: Memory probing fails after 2.6.30 (bisected) In-reply-to: <86802c441001051102j547f10bga2b40fbaee9cf623@mail.gmail.com> References: <20100105110256.D2DF133C4B0@tippex.mynet.homeunix.org> <86802c441001051102j547f10bga2b40fbaee9cf623@mail.gmail.com> Comments: In-reply-to Yinghai Lu message dated "Tue, 05 Jan 2010 11:02:14 -0800." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Tue, 05 Jan 2010 22:15:22 +0100 From: Anders Eriksson Message-Id: <20100105211522.57A3E33C5F5@tippex.mynet.homeunix.org> X-Originating-IP: 83.252.238.172 X-Scan-Result: No virus found in message 1NSGmS-0008Cm-Ct. X-Scan-Signature: ch-smtp03.sth.basefarm.net 1NSGmS-0008Cm-Ct f50a3ec1b056fd8097b052ba830eb21b Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31467 Lines: 682 yinghai@kernel.org said: > whole boot log with debug with boot command line? > > > I can produce a pic of the dmesg for the fingered commit of needed. > boot that with earlyprintk=vga please. I managed to pull this one from the failing boot. Does it help? Linux version 2.6.30-rc2-00450-g8ecee46 (root@korven) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #21 SMP Tue Jan 5 10:45:52 CET 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-88: 0000000000000000 - 000000000009f000 (usable) BIOS-88: 0000000000100000 - 0000000001000000 (usable) console [earlyvga0] enabled DMI 2.4 present. last_pfn = 0x1000 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base F7F800000 mask FFF800000 uncachable 2 base 0FEDA0000 mask FFFFE0000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-0000000001000000 0000000000 - 0000400000 page 4k 0000400000 - 0001000000 page 2M kernel direct mapping tables up to 1000000 @ 7000-b000 ACPI: RSDP 000f78b0 00024 (v02 HP ) ACPI: XSDT 7f7e57c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 7f7e5684 000F4 (v04 HP 30AD 00000003 HP 00000001) ACPI: DSDT 7f7e5acc 0FE7B (v01 HP nc6400 00010000 MSFT 0100000E) ACPI: FACS 7f7f7e80 00040 ACPI: SLIC 7f7e5844 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: HPET 7f7e59bc 00038 (v01 HP 30AD 00000001 HP 00000001) ACPI: APIC 7f7e59f4 00068 (v01 HP 30AD 00000001 HP 00000001) ACPI: MCFG 7f7e5a5c 0003C (v01 HP 30AD 00000001 HP 00000001) ACPI: TCPA 7f7e5a98 00032 (v02 HP 30AD 00000001 HP 00000001) ACPI: SSDT 7f7f5947 00059 (v01 HP HPQNLP 00000001 MSFT 0100000E) ACPI: SSDT 7f7f59a0 0032D (v01 HP HPQSAT 00000001 MSFT 0100000E) ACPI: SSDT 7f7f64e0 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) ACPI: SSDT 7f7f673f 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) ACPI: SSDT 7f7f67e5 004D7 (v01 HP CpuPm 00003000 INTL 20060317) ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 16MB LOWMEM available. mapped low ram: 0 - 01000000 low ram: 0 - 01000000 node 0 low ram: 00000000 - 01000000 node 0 bootmap 00002000 - 00002200 (7 early reservations) ==> bootmem [0000000000 - 0001000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000079a2f8] TEXT DATA BSS ==> [0000100000 - 000079a2f8] #4 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000] #5 [000079b000 - 000079e164] BRK ==> [000079b000 - 000079e164] #6 [0000002000 - 0000003000] BOOTMAP ==> [0000002000 - 0000003000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00001000 HighMem 0x00001000 -> 0x00001000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00001000 On node 0 totalpages: 3999 free_area_init_node: node 0, pgdat c069a480, node_mem_map c000c000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 0000000000100000 Allocating PCI resources starting at 10000000 (gap: 1000000:ff000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 11 pages at c002d000, static data 22940 bytes Built 1 zonelists in Zone order, mobility grouping off. Total pages: 3967 Kernel command line: earlyprintk=vga debug root=/dev/sda5 lpj=5546966 boot_delay=10 init=/bin/bash boot_delay: 10, preset_lpj: 5546966, lpj: 5546966, HZ: 300, printk_delay_msec: 1663800 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:320 PID hash table entries: 64 (order: 6, 256 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1662.321 MHz processor. Console: colour VGA+ 80x25 console handover: boot [earlyvga0] -> real [tty0] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing HighMem for node 0 (00000000:00000000) Memory: 8792k/16384k available (3710k kernel code, 7200k reserved, 2105k data, 324k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xc1800000 - 0xff7fe000 ( 991 MB) lowmem : 0xc0000000 - 0xc1000000 ( 16 MB) .init : 0xc06b8000 - 0xc0709000 ( 324 kB) .data : 0xc049f93b - 0xc06ae084 (2105 kB) .text : 0xc0100000 - 0xc049f93b (3710 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped) preset value.. 3329.85 BogoMIPS (lpj=5546966) Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay loop (skipped) preset value.. 3329.85 BogoMIPS (lpj=5546966) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (6659.70 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 712 bytes HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. xor: automatically using best checksumming function: pIII_sse pIII_sse : 6165.600 MB/sec xor: using function: pIII_sse (6165.600 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [C1EF] (on) ACPI: Power Resource [C1F6] (on) ACPI: Power Resource [C220] (on) ACPI: Power Resource [C228] (on) ACPI: Power Resource [C32D] (off) ACPI: Power Resource [C32E] (off) ACPI: Power Resource [C32F] (off) ACPI: Power Resource [C330] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [C002] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xf4600000-0xf467ffff] pci 0000:00:02.0: reg 14 io port: [0x4000-0x4007] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf4680000-0xf46bffff] pci 0000:00:02.1: reg 10 32bit mmio: [0xf4700000-0xf477ffff] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4780000-0xf4783fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x4020-0x403f] pci 0000:00:1d.1: reg 20 io port: [0x4040-0x405f] pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f] pci 0000:00:1d.3: reg 20 io port: [0x4080-0x409f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4784000-0xf47843ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x40a0-0x40af] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577] pci 0000:00:1f.2: reg 20 io port: [0x40d0-0x40df] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4785000-0xf47853ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:08:00.0: reg 10 64bit mmio: [0xf4100000-0xf410ffff] pci 0000:08:00.0: PME# supported from D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:00:1c.0: bridge 32bit mmio: [0xf4100000-0xf41fffff] pci 0000:10:00.0: reg 10 32bit mmio: [0xf4000000-0xf4000fff] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xf4000000-0xf40fffff] pci 0000:00:1c.3: bridge io port: [0x2000-0x3fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf3ffffff] pci 0000:02:06.0: reg 10 32bit mmio: [0xf4200000-0xf4200fff] pci 0000:02:06.0: supports D1 D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.0: PME# disabled pci 0000:02:06.2: reg 10 32bit mmio: [0xf4201000-0xf4201fff] pci 0000:02:06.2: supports D1 D2 pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.2: PME# disabled pci 0000:02:06.3: reg 10 32bit mmio: [0xf4202000-0xf42020ff] pci 0000:02:06.3: supports D1 D2 pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.3: PME# disabled pci 0000:02:06.4: reg 10 32bit mmio: [0xf4203000-0xf4203fff] pci 0000:02:06.4: reg 14 32bit mmio: [0xf4204000-0xf4204fff] pci 0000:02:06.4: supports D1 D2 pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xf4200000-0xf45fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C101._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C111._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C117._PRT] ACPI: PCI Interrupt Link [C10D] (IRQs *10 11) ACPI: PCI Interrupt Link [C10E] (IRQs *10 11) ACPI: PCI Interrupt Link [C10F] (IRQs 10 *11) ACPI: PCI Interrupt Link [C110] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C123] (IRQs *10 11) ACPI: PCI Interrupt Link [C124] (IRQs *10 11) ACPI: PCI Interrupt Link [C125] (IRQs 10 *11) ACPI Exception (pci_link-0182): AE_NOT_FOUND, Evaluating _PRS [20090320] SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int32x1 682 MB/s raid6: int32x2 683 MB/s raid6: int32x4 506 MB/s raid6: int32x8 444 MB/s raid6: mmxx1 2185 MB/s raid6: mmxx2 2396 MB/s raid6: sse1x1 1321 MB/s raid6: sse1x2 1792 MB/s raid6: sse2x1 2540 MB/s raid6: sse2x2 2769 MB/s raid6: using algorithm sse2x2 (2769 MB/s) ACPI: WMI: Mapper loaded PCI: Using ACPI for IRQ routing NET: Registered protocol family 23 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter cfg80211: Calling CRDA to update world regulatory domain Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved system 00:0c: ioport range 0x500-0x55f has been reserved system 00:0c: ioport range 0x800-0x80f has been reserved system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved system 00:0e: ioport range 0x4d0-0x4d1 has been reserved system 00:0e: ioport range 0x1000-0x107f has been reserved system 00:0e: ioport range 0x1100-0x113f has been reserved system 00:0e: ioport range 0x1200-0x121f has been reserved system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0e: iomem range 0xfec00000-0xfec000ff has been reserved system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:0e: iomem range 0xfed90000-0xfed9afff has been reserved system 00:0f: iomem range 0xfeda0000-0xfedbffff has been reserved system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xf4100000-0xf41fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf4000000-0xf40fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20 pci 0000:00:1c.3: IO window: 0x2000-0x3fff pci 0000:00:1c.3: MEM window: 0xf0000000-0xf3ffffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:06.0: IO window: 0x005000-0x0050ff pci 0000:02:06.0: IO window: 0x005400-0x0054ff pci 0000:02:06.0: PREFETCH window: 0x10000000-0x13ffffff pci 0000:02:06.0: MEM window: 0x14000000-0x17ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x5000-0x5fff pci 0000:00:1e.0: MEM window: 0xf4200000-0xf45fffff pci 0000:00:1e.0: PREFETCH window: 0x00000010000000-0x00000013ffffff pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:08: resource 0 mem: [0x0-0x0] pci_bus 0000:08: resource 1 mem: [0xf4100000-0xf41fffff] pci_bus 0000:08: resource 2 mem: [0x0-0x0] pci_bus 0000:08: resource 3 mem: [0x0-0x0] pci_bus 0000:10: resource 0 mem: [0x0-0x0] pci_bus 0000:10: resource 1 mem: [0xf4000000-0xf40fffff] pci_bus 0000:10: resource 2 mem: [0x0-0x0] pci_bus 0000:10: resource 3 mem: [0x0-0x0] pci_bus 0000:20: resource 0 io: [0x2000-0x3fff] pci_bus 0000:20: resource 1 mem: [0xf0000000-0xf3ffffff] pci_bus 0000:20: resource 2 mem: [0x0-0x0] pci_bus 0000:20: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff] pci_bus 0000:02: resource 1 mem: [0xf4200000-0xf45fffff] pci_bus 0000:02: resource 2 mem: [0x10000000-0x13ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0x5000-0x50ff] pci_bus 0000:03: resource 1 io: [0x5400-0x54ff] pci_bus 0000:03: resource 2 mem: [0x10000000-0x13ffffff] pci_bus 0000:03: resource 3 mem: [0x14000000-0x17ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 512 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: 0, 4096 bytes) TCP: Hash tables configured (established 512 bind 512) TCP reno registered NET: Registered protocol family 1 Machine check exception polling timer started. Microcode Update Driver: v2.00 , Peter Oruba HugeTLB registered 4 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ROMFS MTD (C) 2007 Red Hat, Inc. msgmni has been set to 17 alg: No test for stdrng (krng) async_tx: api initialized (sync-only) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device ACPI: AC Adapter [C1B2] (on-line) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [C249] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [C241] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [C331] (off) fan PNP0C0B:01: registered as cooling_device1 ACPI: Fan [C332] (off) fan PNP0C0B:02: registered as cooling_device2 ACPI: Fan [C333] (off) fan PNP0C0B:03: registered as cooling_device3 ACPI: Fan [C334] (off) ACPI: SSDT 7f7f5d95 001FB (v01 HP Cpu0Ist 00003000 INTL 20060317) ACPI: SSDT 7f7f6015 004CB (v01 HP Cpu0Cst 00003001 INTL 20060317) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI_CPU:00: registered as cooling_device4 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7f7f5ccd 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) ACPI: SSDT 7f7f5f90 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) ACPI: CPU1 (power states: C1[C1] C2[C2]) processor ACPI_CPU:01: registered as cooling_device5 ACPI: Processor [CPU1] (supports 8 throttling states) intel_rng: FWH not detected Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 SyncLink PC Card driver $Revision: 4.34 $ ACPI: Battery Slot [C1B4] (battery present) SyncLink PC Card driver $Revision: 4.34 $, tty major#253 ACPI: Battery Slot [C1B3] (battery absent) cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01) pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x40a0-0x40a7 Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-U10N, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 ahci 0000:00:1f.2: irq 24 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xf4785000 port 0xf4785100 irq 24 ata2: DUMMY ata3: DUMMY ata4: DUMMY tg3.c:v3.98 (February 25, 2009) tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:08:00.0: setting latency timer to 64 tg3 0000:08:00.0: wake-up capability disabled by ACPI tg3 0000:08:00.0: PME# disabled eth0: Tigon3 [partno(BCM95751M) rev 4201] (PCI Express) MAC address 00:1e:ec:a3:fa:9f eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] PPP generic driver version 2.4.2 console [netcon0] enabled netconsole: network logging started yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30ad] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: WDC WD3200BEVT-00ZCT0, 11.01A11, max UDMA/133 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 11.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18 yenta_cardbus 0000:02:06.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x10000000 - 0x13ffffff ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4784000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 driver u132_hcd built at 10:45:40 on Jan 5 2010 usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usb 2-1: new full speed USB device using uhci_hcd and address 2 usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core driver ftdi-elan built at 10:45:37 on Jan 5 2010 usbcore: registered new interface driver ftdi-elan PNP: PS/2 Controller [PNP0303:C21D,PNP0f13:C21E] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver md: linear personality registered for level -1 input: AT Translated Set 2 keyboard as /class/input/input3 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded Bluetooth: Broadcom Blutonium firmware driver ver 1.2 usbcore: registered new interface driver bcm203x EDAC MC: Ver: 2.1.0 Jan 5 2010 cpuidle: using governor ladder Marking TSC unstable due to TSC halts in idle cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 2-1: configuration #1 chosen from 1 choice Advanced Linux Sound Architecture Driver Version 1.0.19. HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA device list: #0: HDA Intel at 0xf4780000 irq 16 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 oprofile: using NMI interrupt. serio: Synaptics pass-through port at isa0060/serio4/input0 TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 input: SynPS/2 Synaptics TouchPad as /class/input/input4 Bluetooth: L2CAP ver 2.13 usb 3-1: new full speed USB device using uhci_hcd and address 2 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. Using IPI No-Shortcut mode usb 3-1: configuration #1 chosen from 1 choice input: PS/2 Generic Mouse as /class/input/input5 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:5. Freeing unused kernel memory: 324k freed EXT3 FS on sda5, internal journal -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/