Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752144Ab0AVH24 (ORCPT ); Fri, 22 Jan 2010 02:28:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750960Ab0AVH24 (ORCPT ); Fri, 22 Jan 2010 02:28:56 -0500 Received: from mailsrv1.zmi.at ([195.202.151.133]:47961 "EHLO mailsrv13.zmi.at" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750770Ab0AVH2x (ORCPT ); Fri, 22 Jan 2010 02:28:53 -0500 To: linux-kernel@vger.kernel.org Subject: kernel "OOPS: SMP" on remount EXT4, kernel 2.6.31.8-0.1-vanilla from openSUSE 11.2 From: Michael Monnerie Organization: it-management http://it-management.at Date: Fri, 22 Jan 2010 08:28:48 +0100 MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart6486238.EUvpQ097YS"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <201001220828.48609@zmi.at> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 66637 Lines: 1295 --nextPart6486238.EUvpQ097YS Content-Type: multipart/mixed; boundary="Boundary-01=_wOVWLWnvPFxF0Fq" Content-Transfer-Encoding: 7bit --Boundary-01=_wOVWLWnvPFxF0Fq Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline (as I got no feedback from my first post on Jan 19, here a re-post) I just had a kernel oops (but system didn't crash). I created an ext4=20 with mkfs.ext4 -L saturnwork -O extent,uninit_bg -E lazy_itable_init=20 /dev/sdc3 and then mounted it with mount /dev/sdc3 /1/disks/work/ -o=20 barrier,delalloc,auto_da_alloc,noatime,acl,user_xattr then a remount: mount -o remount,relatime /1/disks/work/ The disk is SATA and was hot-plugged before, and contained an old linux=20 reiserfs. I attach the full dmesg log for review. You can contact me=20 personally, I'm not on this list. The kernel is from openSUSE 11.2, but vanilla, as with the "desktop"=20 kernel from openSUSE 11.2 my system crashed a lot (hardware seems OK,=20 running memtest for 14 hours showed no problems. Also no problems since=20 I use the vanilla kernel, except this ext4 problem now). Problem seems SMP related, hardware is a quad-core AMD Phenom. After that oops, I couldn't unmount the device anymore, had to reboot=20 the machine. =2D-=20 mit freundlichen Gr=C3=BCssen, Michael Monnerie, Ing. BSc it-management Internet Services http://it-management.at Tel: 0660 / 415 65 31 // Wir haben zwei H=C3=A4user zu verkaufen: // http://zmi.at/langegg/ // http://willhaben.at/iad/realestate/object?adId=3D15923011 --Boundary-01=_wOVWLWnvPFxF0Fq Content-Type: text/plain; charset="utf-8"; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.8-0.1-vanilla (geeko@buildhost) (gcc ve= rsion 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2009-12-= 15 23:55:40 +0100 [ 0.000000] Command line: root=3D/dev/sda2 resume=3D/dev/disk/by-id/ata-= WDC_WD1500HLFS-01G6U0_WD-WXJ608AR0429-part1 splash=3Dsilent quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around = it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usab= le) =3D=3D> (reserved) [ 0.000000] last_pfn =3D 0x230000 max_arch_pfn =3D 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x701060007= 0106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usab= le) =3D=3D> (reserved) [ 0.000000] last_pfn =3D 0xcff90 max_arch_pfn =3D 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] modified: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] modified: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ 12000-14000 [ 0.000000] RAMDISK: 379ee000 - 37fef916 [ 0.000000] ACPI: RSDP 00000000000fb4f0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff90100 00054 (v01 091009 XSDT1614 20090= 910 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 091009 FACP1614 20090= 910 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero addres= s or length: 0000000000000000/1 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 00000000cff90450 0D60E (v01 A1392 A1392001 00000= 001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cffa8000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 091009 APIC1614 20090= 910 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 091009 OEMMCFG 20090= 910 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 091009 OEMB1614 20090= 910 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff9f450 00038 (v01 091009 OEMHPET 20090= 910 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9f490 0088C (v01 A M I POWERNOW 00000= 001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [0000000000013000 - 000000000002afff] [ 0.000000] bootmap [000000000002b000 - 0000000000070fff] pages 46 [ 0.000000] (8 early reservations) =3D=3D> bootmem [0000000000 - 0230000= 000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page =3D=3D> [000= 0000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE =3D=3D> [000= 0006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a76730] TEXT DATA BSS =3D=3D> [000= 1000000 - 0001a76730] [ 0.000000] #3 [00379ee000 - 0037fef916] RAMDISK =3D=3D> [003= 79ee000 - 0037fef916] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved =3D=3D> [000= 009ec00 - 0000100000] [ 0.000000] #5 [0001a77000 - 0001a77340] BRK =3D=3D> [000= 1a77000 - 0001a77340] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE =3D=3D> [000= 0010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE =3D=3D> [000= 0012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff88002860000= 0-ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096926 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3823 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-= 23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000= 9f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000= a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000= e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 00000000001= 00000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cff= a8000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cff= d0000 [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d00= 00000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff7= 00000 [ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 00000001000= 00000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000= :2f700000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff880028034000, static data 8= 2912 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l pages: 2065463 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=3D/dev/sda2 resume=3D/dev/disk/by-= id/ata-WDC_WD1500HLFS-01G6U0_WD-WXJ608AR0429-part1 splash=3Dsilent quiet [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 00000000240= 00000 [ 0.000000] Memory: 8187504k/9175040k available (5221k kernel code, 7873= 36k absent, 200200k reserved, 2616k data, 1620k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:456 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2812.538 MHz processor. [ 0.000956] Console: colour VGA+ 80x25 [ 0.000958] console [tty0] enabled [ 0.004000] allocated 83886080 bytes of page_cgroup [ 0.004000] please try 'cgroup_disable=3Dmemory' option if you don't wan= t memory cgroups [ 0.004000] hpet clockevent registered [ 0.004000] alloc irq_desc for 24 on node 0 [ 0.004000] alloc kstat_irqs on node 0 [ 0.004000] HPET: 4 timers in total, 1 timers will be used for per-cpu t= imer [ 0.004007] Calibrating delay loop (skipped), value calculated using tim= er frequency.. 5625.06 BogoMIPS (lpj=3D11250136) [ 0.004065] Security Framework initialized [ 0.004073] SELinux: Disabled at boot. [ 0.004599] Dentry cache hash table entries: 1048576 (order: 11, 8388608= bytes) [ 0.006744] Inode-cache hash table entries: 524288 (order: 10, 4194304 b= ytes) [ 0.007657] Mount-cache hash table entries: 256 [ 0.007764] Initializing cgroup subsys ns [ 0.007767] Initializing cgroup subsys cpuacct [ 0.007770] Initializing cgroup subsys memory [ 0.007780] Initializing cgroup subsys devices [ 0.007782] Initializing cgroup subsys freezer [ 0.007783] Initializing cgroup subsys net_cls [ 0.007803] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.007805] CPU: L2 Cache: 512K (64 bytes/line) [ 0.007807] CPU 0/0x0 -> Node 0 [ 0.007809] tseg: 0000000000 [ 0.007819] CPU: Physical Processor ID: 0 [ 0.007820] CPU: Processor Core ID: 0 [ 0.007822] mce: CPU supports 6 MCE banks [ 0.007829] using C1E aware idle routine [ 0.007831] Performance Counters: AMD PMU driver. [ 0.007834] ... version: 0 [ 0.007835] ... bit width: 48 [ 0.007836] ... generic counters: 4 [ 0.007838] ... value mask: 0000ffffffffffff [ 0.007839] ... max period: 00007fffffffffff [ 0.007840] ... fixed-purpose counters: 0 [ 0.007842] ... counter mask: 000000000000000f [ 0.008960] ACPI: Core revision 20090521 [ 0.028051] Setting APIC routing to flat [ 0.028346] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D= =2D1 [ 0.070984] CPU0: AMD Phenom(tm) II X4 925 Processor stepping 02 [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5625.13 Bog= oMIPS (lpj=3D11250275) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x701060007= 0106 [ 0.156913] CPU1: AMD Phenom(tm) II X4 925 Processor stepping 02 [ 0.156920] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.160078] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5625.13 Bog= oMIPS (lpj=3D11250278) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 2/0x2 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x701060007= 0106 [ 0.248960] CPU2: AMD Phenom(tm) II X4 925 Processor stepping 02 [ 0.248967] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.252074] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5625.12 Bog= oMIPS (lpj=3D11250249) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/= line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 3/0x3 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x701060007= 0106 [ 0.340909] CPU3: AMD Phenom(tm) II X4 925 Processor stepping 02 [ 0.340915] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.344012] Brought up 4 CPUs [ 0.344014] Total of 4 processors activated (22500.46 BogoMIPS). [ 0.344075] CPU0 attaching sched-domain: [ 0.344078] domain 0: span 0-3 level MC [ 0.344080] groups: 0 1 2 3 [ 0.344085] CPU1 attaching sched-domain: [ 0.344087] domain 0: span 0-3 level MC [ 0.344089] groups: 1 2 3 0 [ 0.344093] CPU2 attaching sched-domain: [ 0.344094] domain 0: span 0-3 level MC [ 0.344096] groups: 2 3 0 1 [ 0.344100] CPU3 attaching sched-domain: [ 0.344101] domain 0: span 0-3 level MC [ 0.344103] groups: 3 0 1 2 [ 0.344167] Booting paravirtualized kernel on bare hardware [ 0.344167] regulator: core version 0.5 [ 0.344167] Time: 10:26:23 Date: 01/18/10 [ 0.344167] NET: Registered protocol family 16 [ 0.344199] node 0 link 0: io port [1000, ffffff] [ 0.344202] TOM: 00000000d0000000 aka 3328M [ 0.344203] Fam 10h mmconf [e0000000, efffffff] [ 0.344206] node 0 link 0: mmio [a0000, bffff] [ 0.344208] node 0 link 0: mmio [d0000000, dfffffff] [ 0.344210] node 0 link 0: mmio [e0000000, efffffff] =3D=3D> none [ 0.344212] node 0 link 0: mmio [f0000000, ffefffff] [ 0.344214] TOM2: 0000000230000000 aka 8960M [ 0.344216] bus: [00,07] on node 0 link 0 [ 0.344218] bus: 00 index 0 io port: [0, ffff] [ 0.344219] bus: 00 index 1 mmio: [a0000, bffff] [ 0.344221] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.344223] bus: 00 index 3 mmio: [f0000000, ffffffff] [ 0.344224] bus: 00 index 4 mmio: [230000000, fcffffffff] [ 0.344233] ACPI: bus type pci registered [ 0.344289] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -= 255 [ 0.344291] PCI: Not using MMCONFIG. [ 0.344292] PCI: Using configuration type 1 for base access [ 0.344294] PCI: Using configuration type 1 for extended access [ 0.344775] bio: create slab at 0 [ 0.344948] ACPI: EC: Look up EC in DSDT [ 0.411745] ACPI: Interpreter enabled [ 0.411749] ACPI: (supports S0 S1 S3 S4 S5) [ 0.411776] ACPI: Using IOAPIC for interrupt routing [ 0.411833] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -= 255 [ 0.418569] PCI: MCFG area at e0000000 reserved in ACPI motherboard reso= urces [ 0.424782] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.434145] ACPI Warning: Incorrect checksum in table [OEMB] - F2, shoul= d be ED 20090521 tbutils-246 [ 0.434277] ACPI: No dock devices found. [ 0.434456] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.434546] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.434548] pci 0000:00:02.0: PME# disabled [ 0.434583] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.434586] pci 0000:00:0a.0: PME# disabled [ 0.434632] pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007] [ 0.434638] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003] [ 0.434645] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007] [ 0.434651] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003] [ 0.434657] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f] [ 0.434663] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe8ffc00-0xfe8fffff] [ 0.434712] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe8fe000-0xfe8fefff] [ 0.434762] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe8fd000-0xfe8fdfff] [ 0.434829] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe8ff800-0xfe8ff8ff] [ 0.434878] pci 0000:00:12.2: supports D1 D2 [ 0.434879] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.434883] pci 0000:00:12.2: PME# disabled [ 0.434912] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe8fc000-0xfe8fcfff] [ 0.434963] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe8fb000-0xfe8fbfff] [ 0.435030] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe8ff400-0xfe8ff4ff] [ 0.435078] pci 0000:00:13.2: supports D1 D2 [ 0.435079] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.435083] pci 0000:00:13.2: PME# disabled [ 0.435192] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.435198] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.435204] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.435210] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.435216] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.435276] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff] [ 0.435316] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.435320] pci 0000:00:14.2: PME# disabled [ 0.435417] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe8fa000-0xfe8fafff] [ 0.435542] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.435550] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9f0000-0xfe9fffff] [ 0.435554] pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.435562] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff] [ 0.435577] pci 0000:01:00.0: supports D1 D2 [ 0.435605] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe9ec000-0xfe9effff] [ 0.435634] pci 0000:01:00.1: supports D1 D2 [ 0.440071] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.440074] pci 0000:00:02.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.440078] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfff= ffff] [ 0.440115] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.440129] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff] [ 0.440139] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.440145] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeaf0000-0xfeafffff] [ 0.440174] pci 0000:02:00.0: supports D1 D2 [ 0.440175] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.440179] pci 0000:02:00.0: PME# disabled [ 0.448078] pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff] [ 0.448082] pci 0000:00:0a.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.448085] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdff= ffff] [ 0.448142] pci 0000:03:08.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff] [ 0.448150] pci 0000:03:08.0: reg 14 io port: [0xec00-0xec7f] [ 0.448206] pci 0000:03:08.0: supports D2 [ 0.448208] pci 0000:03:08.0: PME# supported from D2 D3hot D3cold [ 0.448213] pci 0000:03:08.0: PME# disabled [ 0.448256] pci 0000:00:14.4: transparent bridge [ 0.448259] pci 0000:00:14.4: bridge io port: [0xe000-0xefff] [ 0.448263] pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.448282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.448514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.448594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.448671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.453387] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) [ 0.453511] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.453632] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.453752] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.453872] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0= , disabled. [ 0.453992] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0= , disabled. [ 0.454113] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.454233] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15) [ 0.454416] SCSI subsystem initialized [ 0.454437] libata version 3.00 loaded. [ 0.454437] usbcore: registered new interface driver usbfs [ 0.454437] usbcore: registered new interface driver hub [ 0.454437] usbcore: registered new device driver usb [ 0.454437] PCI: Using ACPI for IRQ routing [ 0.464147] PCI-DMA: Disabling AGP. [ 0.464224] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.464225] PCI-DMA: using GART IOMMU. [ 0.464228] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.465749] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.465755] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.468028] hpet: hpet2 irq 24 for MSI [ 0.484022] pnp: PnP ACPI init [ 0.484041] ACPI: bus type pnp registered [ 0.489998] pnp: PnP ACPI: found 14 devices [ 0.490000] ACPI: ACPI bus type pnp unregistered [ 0.490012] system 00:09: iomem range 0xfec00000-0xfec00fff could not be= reserved [ 0.490015] system 00:09: iomem range 0xfee00000-0xfee00fff has been res= erved [ 0.490020] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.490022] system 00:0a: ioport range 0x40b-0x40b has been reserved [ 0.490024] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved [ 0.490026] system 00:0a: ioport range 0xc00-0xc01 has been reserved [ 0.490028] system 00:0a: ioport range 0xc14-0xc14 has been reserved [ 0.490030] system 00:0a: ioport range 0xc50-0xc51 has been reserved [ 0.490033] system 00:0a: ioport range 0xc52-0xc52 has been reserved [ 0.490035] system 00:0a: ioport range 0xc6c-0xc6c has been reserved [ 0.490037] system 00:0a: ioport range 0xc6f-0xc6f has been reserved [ 0.490039] system 00:0a: ioport range 0xcd0-0xcd1 has been reserved [ 0.490041] system 00:0a: ioport range 0xcd2-0xcd3 has been reserved [ 0.490043] system 00:0a: ioport range 0xcd4-0xcd5 has been reserved [ 0.490045] system 00:0a: ioport range 0xcd6-0xcd7 has been reserved [ 0.490047] system 00:0a: ioport range 0xcd8-0xcdf has been reserved [ 0.490050] system 00:0a: ioport range 0xb00-0xb3f has been reserved [ 0.490052] system 00:0a: ioport range 0x800-0x89f has been reserved [ 0.490054] system 00:0a: ioport range 0xb00-0xb0f has been reserved [ 0.490056] system 00:0a: ioport range 0xb20-0xb3f has been reserved [ 0.490058] system 00:0a: ioport range 0x900-0x90f has been reserved [ 0.490060] system 00:0a: ioport range 0x910-0x91f has been reserved [ 0.490063] system 00:0a: ioport range 0xfe00-0xfefe has been reserved [ 0.490065] system 00:0a: iomem range 0xffb80000-0xffbfffff has been res= erved [ 0.490068] system 00:0a: iomem range 0xfec10000-0xfec1001f has been res= erved [ 0.490070] system 00:0a: iomem range 0xfed40000-0xfed44fff has been res= erved [ 0.490075] system 00:0b: ioport range 0x230-0x23f has been reserved [ 0.490077] system 00:0b: ioport range 0x290-0x29f has been reserved [ 0.490079] system 00:0b: ioport range 0x300-0x30f has been reserved [ 0.490081] system 00:0b: ioport range 0xa30-0xa3f has been reserved [ 0.490085] system 00:0c: iomem range 0xe0000000-0xefffffff has been res= erved [ 0.490089] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.490092] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.490094] system 00:0d: iomem range 0xe0000-0xfffff could not be reser= ved [ 0.490096] system 00:0d: iomem range 0x100000-0xcfffffff could not be r= eserved [ 0.490098] system 00:0d: iomem range 0xfec00000-0xffffffff could not be= reserved [ 0.494820] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.494823] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.494826] pci 0000:00:02.0: MEM window: 0xfe900000-0xfe9fffff [ 0.494829] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x0000= 00dfffffff [ 0.494832] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.494835] pci 0000:00:0a.0: IO window: 0xd000-0xdfff [ 0.494837] pci 0000:00:0a.0: MEM window: 0xfea00000-0xfeafffff [ 0.494840] pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x0000= 00fdffffff [ 0.494843] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.494846] pci 0000:00:14.4: IO window: 0xe000-0xefff [ 0.494851] pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff [ 0.494855] pci 0000:00:14.4: PREFETCH window: disabled [ 0.494864] alloc irq_desc for 18 on node 0 [ 0.494866] alloc kstat_irqs on node 0 [ 0.494870] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.494874] pci 0000:00:02.0: setting latency timer to 64 [ 0.494879] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.494881] pci 0000:00:0a.0: setting latency timer to 64 [ 0.494888] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.494890] pci_bus 0000:00: resource 1 mem: [0x000000-0xfffffffffffffff= f] [ 0.494893] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.494895] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff] [ 0.494897] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.494899] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.494901] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.494903] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.494905] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.494906] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.494908] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.494910] pci_bus 0000:03: resource 4 mem: [0x000000-0xfffffffffffffff= f] [ 0.494996] NET: Registered protocol family 2 [ 0.495204] IP route cache hash table entries: 262144 (order: 9, 2097152= bytes) [ 0.496273] TCP established hash table entries: 524288 (order: 11, 83886= 08 bytes) [ 0.498200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.498441] TCP: Hash tables configured (established 524288 bind 65536) [ 0.498443] TCP reno registered [ 0.498574] NET: Registered protocol family 1 [ 0.498623] Unpacking initramfs... [ 0.500901] Switched to high resolution mode on CPU 3 [ 0.500904] Switched to high resolution mode on CPU 1 [ 0.500945] Switched to high resolution mode on CPU 2 [ 0.504018] Switched to high resolution mode on CPU 0 [ 0.593504] Freeing initrd memory: 6150k freed [ 0.595206] Scanning for low memory corruption every 60 seconds [ 0.595340] audit: initializing netlink socket (disabled) [ 0.595350] type=3D2000 audit(1263810382.592:1): initialized [ 0.601000] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.601147] VFS: Disk quotas dquot_6.5.2 [ 0.601176] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.601309] msgmni has been set to 16003 [ 0.601383] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma= jor 253) [ 0.601385] io scheduler noop registered [ 0.601386] io scheduler anticipatory registered [ 0.601388] io scheduler deadline registered [ 0.601406] io scheduler cfq registered (default) [ 0.764041] pci 0000:01:00.0: Boot video device [ 0.764171] alloc irq_desc for 25 on node 0 [ 0.764173] alloc kstat_irqs on node 0 [ 0.764180] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 0.764185] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.764271] alloc irq_desc for 26 on node 0 [ 0.764272] alloc kstat_irqs on node 0 [ 0.764277] pcieport-driver 0000:00:0a.0: irq 26 for MSI/MSI-X [ 0.764280] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 0.765246] Non-volatile memory driver v1.3 [ 0.765248] Linux agpgart interface v0.103 [ 0.765251] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.765347] serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A [ 0.765617] 00:08: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A [ 0.765751] ahci 0000:00:11.0: version 3.0 [ 0.765763] alloc irq_desc for 22 on node 0 [ 0.765764] alloc kstat_irqs on node 0 [ 0.765769] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.765890] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x= 3f impl SATA mode [ 0.765893] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp= pio slum part=20 [ 0.766185] scsi0 : ahci [ 0.766259] scsi1 : ahci [ 0.766297] scsi2 : ahci [ 0.766334] scsi3 : ahci [ 0.766372] scsi4 : ahci [ 0.766408] scsi5 : ahci [ 0.766521] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd0= 0 irq 22 [ 0.766525] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd8= 0 irq 22 [ 0.766528] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe0= 0 irq 22 [ 0.766531] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe8= 0 irq 22 [ 0.766534] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff0= 0 irq 22 [ 0.766537] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff8= 0 irq 22 [ 0.766612] Fixed MDIO Bus: probed [ 0.766618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.766669] alloc irq_desc for 17 on node 0 [ 0.766670] alloc kstat_irqs on node 0 [ 0.766674] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> I= RQ 17 [ 0.766685] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.766704] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus = number 1 [ 0.766738] ehci_hcd 0000:00:12.2: debug port 1 [ 0.766752] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800 [ 0.776023] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.776047] usb usb1: New USB device found, idVendor=3D1d6b, idProduct= =3D0002 [ 0.776049] usb usb1: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 0.776051] usb usb1: Product: EHCI Host Controller [ 0.776053] usb usb1: Manufacturer: Linux 2.6.31.8-0.1-vanilla ehci_hcd [ 0.776054] usb usb1: SerialNumber: 0000:00:12.2 [ 0.776093] usb usb1: configuration #1 chosen from 1 choice [ 0.776113] hub 1-0:1.0: USB hub found [ 0.776119] hub 1-0:1.0: 6 ports detected [ 0.776208] alloc irq_desc for 19 on node 0 [ 0.776209] alloc kstat_irqs on node 0 [ 0.776215] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> I= RQ 19 [ 0.776225] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.776233] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus = number 2 [ 0.776262] ehci_hcd 0000:00:13.2: debug port 1 [ 0.776275] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400 [ 0.788023] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.788045] usb usb2: New USB device found, idVendor=3D1d6b, idProduct= =3D0002 [ 0.788046] usb usb2: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 0.788048] usb usb2: Product: EHCI Host Controller [ 0.788050] usb usb2: Manufacturer: Linux 2.6.31.8-0.1-vanilla ehci_hcd [ 0.788051] usb usb2: SerialNumber: 0000:00:13.2 [ 0.788086] usb usb2: configuration #1 chosen from 1 choice [ 0.788103] hub 2-0:1.0: USB hub found [ 0.788108] hub 2-0:1.0: 6 ports detected [ 0.788166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.788206] alloc irq_desc for 16 on node 0 [ 0.788208] alloc kstat_irqs on node 0 [ 0.788212] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> I= RQ 16 [ 0.788224] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.788230] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus = number 3 [ 0.788251] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000 [ 0.848022] usb usb3: New USB device found, idVendor=3D1d6b, idProduct= =3D0001 [ 0.848025] usb usb3: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 0.848027] usb usb3: Product: OHCI Host Controller [ 0.848029] usb usb3: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd [ 0.848030] usb usb3: SerialNumber: 0000:00:12.0 [ 0.848065] usb usb3: configuration #1 chosen from 1 choice [ 0.848086] hub 3-0:1.0: USB hub found [ 0.848095] hub 3-0:1.0: 3 ports detected [ 0.848171] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> I= RQ 16 [ 0.848182] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.848188] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus = number 4 [ 0.848204] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000 [ 0.908020] usb usb4: New USB device found, idVendor=3D1d6b, idProduct= =3D0001 [ 0.908022] usb usb4: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 0.908024] usb usb4: Product: OHCI Host Controller [ 0.908026] usb usb4: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd [ 0.908027] usb usb4: SerialNumber: 0000:00:12.1 [ 0.908064] usb usb4: configuration #1 chosen from 1 choice [ 0.908083] hub 4-0:1.0: USB hub found [ 0.908090] hub 4-0:1.0: 3 ports detected [ 0.908167] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> I= RQ 18 [ 0.908179] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.908184] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus = number 5 [ 0.908206] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000 [ 0.968018] usb usb5: New USB device found, idVendor=3D1d6b, idProduct= =3D0001 [ 0.968021] usb usb5: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 0.968023] usb usb5: Product: OHCI Host Controller [ 0.968024] usb usb5: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd [ 0.968026] usb usb5: SerialNumber: 0000:00:13.0 [ 0.968063] usb usb5: configuration #1 chosen from 1 choice [ 0.968080] hub 5-0:1.0: USB hub found [ 0.968088] hub 5-0:1.0: 3 ports detected [ 0.968167] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> I= RQ 18 [ 0.968177] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.968183] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus = number 6 [ 0.968199] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8fb000 [ 1.028020] usb usb6: New USB device found, idVendor=3D1d6b, idProduct= =3D0001 [ 1.028022] usb usb6: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 1.028024] usb usb6: Product: OHCI Host Controller [ 1.028026] usb usb6: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd [ 1.028027] usb usb6: SerialNumber: 0000:00:13.1 [ 1.028067] usb usb6: configuration #1 chosen from 1 choice [ 1.028085] hub 6-0:1.0: USB hub found [ 1.028092] hub 6-0:1.0: 3 ports detected [ 1.028170] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> I= RQ 18 [ 1.028182] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.028188] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus = number 7 [ 1.028203] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fa000 [ 1.084369] ata5: SATA link down (SStatus 0 SControl 300) [ 1.084451] ata4: SATA link down (SStatus 0 SControl 300) [ 1.084475] ata6: SATA link down (SStatus 0 SControl 300) [ 1.088020] usb usb7: New USB device found, idVendor=3D1d6b, idProduct= =3D0001 [ 1.088023] usb usb7: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 1.088024] usb usb7: Product: OHCI Host Controller [ 1.088026] usb usb7: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd [ 1.088027] usb usb7: SerialNumber: 0000:00:14.5 [ 1.088062] usb usb7: configuration #1 chosen from 1 choice [ 1.088080] hub 7-0:1.0: USB hub found [ 1.088088] hub 7-0:1.0: 2 ports detected [ 1.088135] uhci_hcd: USB Universal Host Controller Interface driver [ 1.088179] Initializing USB Mass Storage driver... [ 1.088206] usbcore: registered new interface driver usb-storage [ 1.088208] USB Mass Storage support registered. [ 1.088232] usbcore: registered new interface driver libusual [ 1.088240] usbcore: registered new interface driver ums-alauda [ 1.088248] usbcore: registered new interface driver ums-cypress [ 1.088256] usbcore: registered new interface driver ums-datafab [ 1.088264] usbcore: registered new interface driver ums-freecom [ 1.088272] usbcore: registered new interface driver ums-isd200 [ 1.088279] usbcore: registered new interface driver ums-jumpshot [ 1.088288] usbcore: registered new interface driver ums-karma [ 1.088296] usbcore: registered new interface driver ums-onetouch [ 1.088304] usbcore: registered new interface driver ums-sddr09 [ 1.088312] usbcore: registered new interface driver ums-sddr55 [ 1.088320] usbcore: registered new interface driver ums-usbat [ 1.088348] PNP: No PS/2 controller found. Probing ports directly. [ 1.088643] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.088649] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.088703] mice: PS/2 mouse device common for all mice [ 1.088781] rtc_cmos 00:03: RTC can wake from S4 [ 1.088806] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.088829] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.088840] cpuidle: using governor ladder [ 1.088841] cpuidle: using governor menu [ 1.089026] usbcore: registered new interface driver hiddev [ 1.089038] usbcore: registered new interface driver usbhid [ 1.089039] usbhid: v2.6:USB HID core driver [ 1.089282] TCP cubic registered [ 1.089336] NET: Registered protocol family 10 [ 1.089669] lo: Disabled Privacy Extensions [ 1.089896] lib80211: common routines for IEEE802.11 drivers [ 1.089898] lib80211_crypt: registered algorithm 'NULL' [ 1.089951] PM: Checking image partition /dev/disk/by-id/ata-WDC_WD1500H= LFS-01G6U0_WD-WXJ608AR0429-part1 [ 1.248032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.248056] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.248074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.250684] ata2.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100 [ 1.250998] ata1.00: ATA-8: WDC WD1500HLFS-01G6U0, 04.04V01, max UDMA/133 [ 1.251000] ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.251100] ata3.00: ATA-8: WDC WD2002FYPS-01U1B0, 04.05G04, max UDMA/133 [ 1.251102] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/3= 2) [ 1.253943] ata3.00: configured for UDMA/133 [ 1.254141] ata1.00: configured for UDMA/133 [ 1.254512] ata2.00: configured for UDMA/100 [ 1.268104] scsi 0:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04= =2E0 PQ: 0 ANSI: 5 [ 1.268217] sd 0:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB= /139 GiB) [ 1.268245] sd 0:0:0:0: [sda] Write Protect is off [ 1.268247] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.268261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 1.268344] sda: sda1 sda2 sda3 [ 1.273572] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.382858] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL= 00 PQ: 0 ANSI: 5 [ 1.382976] scsi 2:0:0:0: Direct-Access ATA WDC WD2002FYPS-0 04= =2E0 PQ: 0 ANSI: 5 [ 1.383067] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 = TB/1.81 TiB) [ 1.383094] sd 2:0:0:0: [sdb] Write Protect is off [ 1.383096] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.383110] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 1.383176] sdb: [ 1.408020] usb 3-2: new low speed USB device using ohci_hcd and address= 2 [ 1.434262] sdb1 [ 1.434413] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.434417] PM: Resume from disk failed. [ 1.434425] registered taskstats version 1 [ 1.434527] Magic number: 10:753:426 [ 1.434584] rtc_cmos 00:03: setting system clock to 2010-01-18 10:26:24 = UTC (1263810384) [ 1.434633] Freeing unused kernel memory: 1620k freed [ 1.434968] Write protecting the kernel read-only data: 7332k [ 1.459951] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -= > IRQ 16 [ 1.459975] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 1.460043] scsi6 : pata_atiixp [ 1.460094] scsi7 : pata_atiixp [ 1.461366] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq= 14 [ 1.461368] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq= 15 [ 1.577066] usb 3-2: New USB device found, idVendor=3D046d, idProduct=3D= c047 [ 1.577069] usb 3-2: New USB device strings: Mfr=3D1, Product=3D2, Seria= lNumber=3D0 [ 1.577071] usb 3-2: Product: USB Optical Mouse [ 1.577072] usb 3-2: Manufacturer: Logitech [ 1.577122] usb 3-2: configuration #1 chosen from 1 choice [ 1.586202] input: Logitech USB Optical Mouse as /devices/pci0000:00/000= 0:00:12.0/usb3/3-2/3-2:1.0/input/input0 [ 1.586244] generic-usb 0003:046D:C047.0001: input,hidraw0: USB HID v1.1= 0 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-2/input0 [ 1.696021] usb 2-5: new high speed USB device using ehci_hcd and addres= s 2 [ 1.792637] Uniform Multi-Platform E-IDE driver [ 1.798616] processor LNXCPU:00: registered as cooling_device0 [ 1.798620] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.798975] processor LNXCPU:01: registered as cooling_device1 [ 1.799316] processor LNXCPU:02: registered as cooling_device2 [ 1.799658] processor LNXCPU:03: registered as cooling_device3 [ 1.803696] udev: starting version 146 [ 1.830403] usb 2-5: New USB device found, idVendor=3D05e3, idProduct=3D= 0608 [ 1.830407] usb 2-5: New USB device strings: Mfr=3D0, Product=3D1, Seria= lNumber=3D0 [ 1.830409] usb 2-5: Product: USB2.0 Hub [ 1.830471] usb 2-5: configuration #1 chosen from 1 choice [ 1.830795] hub 2-5:1.0: USB hub found [ 1.831025] hub 2-5:1.0: 4 ports detected [ 2.030465] PM: Marking nosave pages: 000000000009e000 - 0000000000100000 [ 2.030469] PM: Marking nosave pages: 00000000cff90000 - 0000000100000000 [ 2.030962] PM: Marking nosave pages: 0000000020000000 - 0000000024000000 [ 2.031191] PM: Basic memory bitmaps created [ 2.062474] PM: Basic memory bitmaps freed [ 2.068131] PM: Starting manual resume from disk [ 2.068134] PM: Resume from partition 259:524288 [ 2.068135] PM: Checking hibernation image. [ 2.068245] PM: Resume from disk failed. [ 2.093020] usb 4-2: new low speed USB device using ohci_hcd and address= 2 [ 2.110443] EXT4-fs (sda2): barriers enabled [ 2.113161] kjournald2 starting: pid 320, dev sda2:8, commit interval 5 = seconds [ 2.121789] EXT4-fs (sda2): internal journal on sda2:8 [ 2.121793] EXT4-fs (sda2): delayed allocation enabled [ 2.121795] EXT4-fs: file extents enabled [ 2.121842] EXT4-fs: mballoc enabled [ 2.121852] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 2.263052] usb 4-2: New USB device found, idVendor=3D046a, idProduct=3D= 0001 [ 2.263055] usb 4-2: New USB device strings: Mfr=3D1, Product=3D0, Seria= lNumber=3D0 [ 2.263057] usb 4-2: Manufacturer: Cherry GmbH [ 2.263119] usb 4-2: configuration #1 chosen from 1 choice [ 2.272205] input: Cherry GmbH as /devices/pci0000:00/0000:00:12.1/usb4/= 4-2/4-2:1.0/input/input1 [ 2.272244] generic-usb 0003:046A:0001.0002: input,hidraw1: USB HID v1.1= 1 Keyboard [Cherry GmbH] on usb-0000:00:12.1-2/input0 [ 2.533020] usb 4-3: new low speed USB device using ohci_hcd and address= 3 [ 2.711063] usb 4-3: New USB device found, idVendor=3D051d, idProduct=3D= 0002 [ 2.711067] usb 4-3: New USB device strings: Mfr=3D3, Product=3D1, Seria= lNumber=3D2 [ 2.711069] usb 4-3: Product: Smart-UPS 1500 FW:653.13.I USB FW:7.3 [ 2.711071] usb 4-3: Manufacturer: American Power Conversion [ 2.711072] usb 4-3: SerialNumber: AS0717131457 [ 2.711129] usb 4-3: configuration #1 chosen from 1 choice [ 4.226127] generic-usb 0003:051D:0002.0003: hiddev0,hidraw2: USB HID v1= =2E10 Device [American Power Conversion Smart-UPS 1500 FW:653.13.I USB FW:7= =2E3] on usb-0000:00:12.1-3/input0 [ 4.971898] udev: starting version 146 [ 5.042863] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.042883] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.042901] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.043867] ACPI: WMI: Mapper loaded [ 5.044593] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/inpu= t/input2 [ 5.044613] ACPI: Power Button [PWRF] [ 5.044656] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0= C:00/input/input3 [ 5.044675] ACPI: Power Button [PWRB] [ 5.143383] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 = cdda tray [ 5.143386] Uniform CD-ROM driver Revision: 3.20 [ 5.143455] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.175673] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.183230] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with = ACPI region SOR1 [0xb00-0xb0f] [ 5.183315] ACPI: If an ACPI driver is available for this device, you sh= ould use it instead of the native driver [ 5.197954] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.197971] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ = 18 [ 5.198035] r8169 0000:02:00.0: setting latency timer to 64 [ 5.198066] alloc irq_desc for 27 on node 0 [ 5.198067] alloc kstat_irqs on node 0 [ 5.198079] r8169 0000:02:00.0: irq 27 for MSI/MSI-X [ 5.198509] eth0: RTL8168d/8111d at 0xffffc90011a90000, 90:e6:ba:c9:f4:c= 8, XID 283000c0 IRQ 27 [ 5.275780] EDAC MC: Ver: 2.1.0 Dec 18 2009 [ 5.366829] IT8712 SuperIO detected. [ 5.367167] parport_pc 00:06: reported by Plug and Play ACPI [ 5.367232] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRI= STATE,COMPAT,ECP,DMA] [ 5.372892] alloc irq_desc for 23 on node 0 [ 5.372894] alloc kstat_irqs on node 0 [ 5.372901] ohci1394 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> I= RQ 23 [ 5.388663] EDAC amd64_edac: Ver: 3.2.0 Dec 18 2009 [ 5.388828] EDAC amd64: This node reports that Memory ECC is currently d= isabled. [ 5.388831] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTR= OL device (0000:00:18.3) should be enabled [ 5.388834] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIO= S. Module will NOT be loaded. [ 5.388835] Either Enable ECC in the BIOS, or use the 'ecc_enable_ov= erride' parameter. [ 5.388836] Might be a BIOS bug, if BIOS says ECC is enabled [ 5.388837] Use of the override can cause unknown side effects. [ 5.388847] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 5.430050] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[23] MMIO=3D= [febff800-febfffff] Max Packet=3D[2048] IR/IT contexts=3D[4/8] [ 5.510135] ppdev: user-space parallel port driver [ 5.562242] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> = IRQ 16 [ 5.643905] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2= =2E6.31/sound/pci/hda/hda_codec.c:3857: autoconfig: line_outs=3D4 (0x1c/0x1= 9/0x22/0x23/0x0) [ 5.643909] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2= =2E6.31/sound/pci/hda/hda_codec.c:3861: speaker_outs=3D0 (0x0/0x0/0x0/0x= 0/0x0) [ 5.643913] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2= =2E6.31/sound/pci/hda/hda_codec.c:3865: hp_outs=3D1 (0x1d/0x0/0x0/0x0/0x= 0) [ 5.643916] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2= =2E6.31/sound/pci/hda/hda_codec.c:3866: mono: mono_out=3D0x0 [ 5.643919] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2= =2E6.31/sound/pci/hda/hda_codec.c:3869: dig-out=3D0x20/0x21 [ 5.643921] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2= =2E6.31/sound/pci/hda/hda_codec.c:3877: inputs: mic=3D0x1a, fmic=3D0x1e,= line=3D0x1b, fline=3D0x0, cd=3D0x0, aux=3D0x0 [ 5.645999] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> = IRQ 19 [ 5.646030] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5.842169] Adding 8393920k swap on /dev/sda1. Priority:-1 extents:1 ac= ross:8393920k=20 [ 6.046847] device-mapper: uevent: version 1.0.3 [ 6.046923] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:= dm-devel@redhat.com [ 6.283334] loop: module loaded [ 6.291875] EXT4-fs (sda3): barriers enabled [ 6.292244] kjournald2 starting: pid 756, dev sda3:8, commit interval 5 = seconds [ 6.299111] EXT4-fs (sda3): internal journal on sda3:8 [ 6.299114] EXT4-fs (sda3): delayed allocation enabled [ 6.299117] EXT4-fs: file extents enabled [ 6.308987] EXT4-fs: mballoc enabled [ 6.308998] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 6.414812] SGI XFS with ACLs, security attributes, realtime, large bloc= k/inode numbers, no debug enabled [ 6.415239] SGI XFS Quota Management subsystem [ 6.437009] XFS mounting filesystem sdb1 [ 6.593332] Ending clean XFS mount for filesystem: sdb1 [ 6.708140] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1e00000000008c= 00] [ 6.786157] fuse init (API version 7.12) [ 8.647097] powernow-k8: Found 1 AMD Phenom(tm) II X4 925 Processor proc= essors (4 cpu cores) (version 2.20.00) [ 8.647141] powernow-k8: 0 : pstate 0 (2800 MHz) [ 8.647144] powernow-k8: 1 : pstate 1 (2100 MHz) [ 8.647146] powernow-k8: 2 : pstate 2 (1600 MHz) [ 8.647149] powernow-k8: 3 : pstate 3 (800 MHz) [ 9.551024] [drm] Initialized drm 1.1.0 20060810 [ 9.566972] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.566991] pci 0000:01:00.0: setting latency timer to 64 [ 9.567261] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on= minor 0 [ 9.707903] [drm] Setting GART location based on new memory map [ 9.722890] [drm] Loading RV710 PFP Microcode [ 9.722901] [drm] Loading RV710 CP Microcode [ 9.737813] [drm] Resetting GPU [ 9.737870] [drm] writeback test succeeded in 1 usecs [ 10.267031] r8169: eth0: link up [ 10.267048] r8169: eth0: link up [ 11.252552] RPC: Registered udp transport module. [ 11.252556] RPC: Registered tcp transport module. [ 11.297919] Slow work thread pool: Starting up [ 11.298337] Slow work thread pool: Ready [ 11.298419] FS-Cache: Loaded [ 11.357982] FS-Cache: Netfs 'nfs' registered for caching [ 12.650405] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 13.298721] [drm] Resetting GPU [ 21.036033] eth0: no IPv6 routers present [ 146.826813] [drm] Loading RV710 PFP Microcode [ 146.826842] [drm] Loading RV710 CP Microcode [ 146.841772] [drm] Resetting GPU [ 154.130762] CPU0 attaching NULL sched-domain. [ 154.130774] CPU1 attaching NULL sched-domain. [ 154.130780] CPU2 attaching NULL sched-domain. [ 154.130786] CPU3 attaching NULL sched-domain. [ 154.148532] CPU0 attaching sched-domain: [ 154.148543] domain 0: span 0-3 level MC [ 154.148550] groups: 0 1 2 3 [ 154.148568] CPU1 attaching sched-domain: [ 154.148573] domain 0: span 0-3 level MC [ 154.148579] groups: 1 2 3 0 [ 154.148592] CPU2 attaching sched-domain: [ 154.148597] domain 0: span 0-3 level MC [ 154.148602] groups: 2 3 0 1 [ 154.148615] CPU3 attaching sched-domain: [ 154.148619] domain 0: span 0-3 level MC [ 154.148624] groups: 3 0 1 2 [ 195.325191] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 195.343931] ISO 9660 Extensions: RRIP_1991A [79634.944656] ata1: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe = frozen [79634.944676] ata1: irq_stat 0x00400000, PHY RDY changed [79634.944691] ata1: SError: { RecovComm Persist PHYRdyChg 10B8B } [79634.944708] ata1: hard resetting link [79634.944735] ata3: exception Emask 0x50 SAct 0x0 SErr 0x90a02 action 0xe = frozen [79634.944748] ata3: irq_stat 0x00400000, PHY RDY changed [79634.944760] ata3: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B } [79634.944774] ata3: hard resetting link [79635.836086] ata1: SATA link down (SStatus 0 SControl 300) [79635.861391] ata1: hard resetting link [79639.313061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [79639.341815] ata1.00: configured for UDMA/133 [79639.341850] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [79639.341862] ata1: irq_stat 0x00400040, connection status changed [79639.349060] ata1.00: configured for UDMA/133 [79639.349078] ata1: EH complete [79641.656076] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [79641.688909] ata3.00: configured for UDMA/133 [79641.688929] ata3: EH complete [79644.477353] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0x= e frozen [79644.477372] ata6: irq_stat 0x00400040, connection status changed [79644.477387] ata6: SError: { PHYRdyChg CommWake 10B8B DevExch } [79644.477406] ata6: hard resetting link [79645.364077] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [79645.407969] ata6.00: ATA-7: ST3320620NS, 3.AEG, max UDMA/133 [79645.407986] ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [79645.466302] ata6.00: configured for UDMA/133 [79645.466329] ata6: EH complete [79645.466522] scsi 5:0:0:0: Direct-Access ATA ST3320620NS 3.= AE PQ: 0 ANSI: 5 [79645.466859] sd 5:0:0:0: Attached scsi generic sg3 type 0 [79645.467379] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB= /298 GiB) [79645.467529] sd 5:0:0:0: [sdc] Write Protect is off [79645.467542] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [79645.467593] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [79645.467898] sdc: sdc1 sdc2 sdc3 [79645.506961] sd 5:0:0:0: [sdc] Attached SCSI disk [80391.082414] REISERFS (device sdc2): found reiserfs format "3.6" with sta= ndard journal [80391.082453] REISERFS (device sdc2): using ordered data mode [80391.089544] REISERFS (device sdc2): journal params: device sdc2, size 81= 92, journal first block 18, max trans len 1024, max batch 900, max commit a= ge 30, max trans age 30 [80391.090610] REISERFS (device sdc2): checking transaction log (sdc2) [80391.523508] REISERFS (device sdc2): Using r5 hash to sort names [80391.523581] REISERFS (device sdc2): Created .reiserfs_priv - reserved fo= r xattr storage. [80400.398697] REISERFS (device sdc2): found reiserfs format "3.6" with sta= ndard journal [80400.398742] REISERFS (device sdc2): using ordered data mode [80400.402876] REISERFS (device sdc2): journal params: device sdc2, size 81= 92, journal first block 18, max trans len 1024, max batch 900, max commit a= ge 30, max trans age 30 [80400.403935] REISERFS (device sdc2): checking transaction log (sdc2) [80400.411892] REISERFS (device sdc2): Using r5 hash to sort names [80765.236856] EXT4-fs (sdc3): barriers enabled [80765.251127] kjournald2 starting: pid 14574, dev sdc3:8, commit interval = 5 seconds [80765.251586] EXT4-fs (sdc3): internal journal on sdc3:8 [80765.251607] EXT4-fs (sdc3): delayed allocation enabled [80765.251620] EXT4-fs: file extents enabled [80765.341889] EXT4-fs: mballoc enabled [80765.341931] EXT4-fs (sdc3): mounted filesystem with ordered data mode [80808.306719] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success) [80808.306736] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits= , 0 breaks, 0 lost [80808.306752] EXT4-fs: mballoc: 0 generated and it took 0 [80808.306761] EXT4-fs: mballoc: 0 preallocated, 0 discarded [80835.571895] EXT4-fs (sdc3): barriers enabled [80835.586163] kjournald2 starting: pid 14587, dev sdc3:8, commit interval = 5 seconds [80835.586582] EXT4-fs (sdc3): internal journal on sdc3:8 [80835.586603] EXT4-fs (sdc3): delayed allocation enabled [80835.586616] EXT4-fs: file extents enabled [80835.676777] EXT4-fs: mballoc enabled [80835.676818] EXT4-fs (sdc3): mounted filesystem with ordered data mode [80852.449414] BUG: unable to handle kernel NULL pointer dereference at (nu= ll) [80852.449439] IP: [] memcpy_c+0x10/0x20 [80852.449462] PGD 17cdae067 PUD 2188dc067 PMD 0=20 [80852.449477] Oops: 0000 [#1] SMP=20 [80852.449488] last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/host5/= target5:0:0/5:0:0:0/block/sdc/sdc3/start [80852.449505] CPU 3=20 [80852.449512] Modules linked in: reiserfs nls_utf8 snd_pcm_oss snd_mixer_o= ss snd_seq snd_seq_device edd nfs lockd fscache nfs_acl auth_rpcgss sunrpc = radeon drm cpufreq_conservative cpufreq_userspace cpufreq_powersave powerno= w_k8 fuse xfs exportfs loop dm_mod snd_hda_codec_atihdmi snd_hda_codec_via = snd_hda_intel snd_hda_codec snd_hwdep snd_pcm ppdev snd_timer amd64_edac_mo= d ohci1394 parport_pc snd parport edac_core snd_page_alloc ieee1394 r8169 i= 2c_piix4 pcspkr sr_mod cdrom serio_raw asus_atk0110 button wmi sg ext4 jbd2= crc16 fan processor ide_pci_generic atiixp ide_core ata_generic pata_marve= ll pata_atiixp thermal thermal_sys [80852.449677] Pid: 14593, comm: mount Not tainted 2.6.31.8-0.1-vanilla #1 = System Product Name [80852.449692] RIP: 0010:[] [] memcpy_= c+0x10/0x20 [80852.449712] RSP: 0018:ffff880225053c20 EFLAGS: 00010202 [80852.449722] RAX: ffff880204d847e0 RBX: ffff880225053ce8 RCX: 00000000000= 00001 [80852.449734] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff880204d= 847e0 [80852.449746] RBP: ffff880225053c68 R08: fffffffffffffffa R09: ffff8801310= 61007 [80852.449758] R10: 000000000000002c R11: 0000000000000202 R12: ffff880204d= 847e0 [80852.449770] R13: ffff880225053ce4 R14: 0000000000000000 R15: 00000000fff= fffea [80852.449783] FS: 00007f6ba3d1b7d0(0000) GS:ffff880028088000(0000) knlGS:= 00000000f6937970 [80852.449797] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [80852.449808] CR2: 0000000000000000 CR3: 00000001985f7000 CR4: 00000000000= 006e0 [80852.449820] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000= 00000 [80852.449832] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000= 00400 [80852.449844] Process mount (pid: 14593, threadinfo ffff880225052000, task= ffff88019814a440) [80852.449857] Stack: [80852.449863] ffffffff812757ec ffff880225053ce8 000000003b3945e5 ffff8801= 7c0fbc00 [80852.449878] <0> ffff880224580c00 ffff880131061000 ffff880225053cd0 ffff8= 8017c0fbc00 [80852.449897] <0> ffff880225053ce8 ffff880225053c88 ffffffff812758ee ffff8= 80131061000 [80852.449917] Call Trace: [80852.449929] [] ? match_number+0x6c/0xd0 [80852.449945] [] match_int+0x1e/0x40 [80852.449992] [] parse_options+0x1ab/0x8b0 [ext4] [80852.450010] [] ? __filemap_fdatawrite_range+0x5b/0x80 [80852.450057] [] ext4_remount+0xe6/0x4d0 [ext4] [80852.450073] [] do_remount_sb+0x7a/0x180 [80852.450086] [] do_remount+0x14e/0x170 [80852.450098] [] do_mount+0x1f2/0x240 [80852.450110] [] ? copy_mount_options+0x102/0x1b0 [80852.450123] [] sys_mount+0x9e/0x100 [80852.450138] [] system_call_fastpath+0x16/0x1b [80852.450148] Code: 00 48 3b 42 20 73 07 48 8b 50 f9 31 c0 c3 31 d2 48 c7 = c0 f2 ff ff ff c3 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 f3 48 a5 89 d1 = a4 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 eb de f8 89 d1=20 [80852.450247] RIP [] memcpy_c+0x10/0x20 [80852.450261] RSP [80852.450269] CR2: 0000000000000000 [80852.450279] ---[ end trace af3c39f272f308bf ]--- [80852.450287] ------------[ cut here ]------------ [80852.450301] WARNING: at /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/= linux-2.6.31/kernel/exit.c:895 do_exit+0x36a/0x370() [80852.450317] Hardware name: System Product Name [80852.450325] Modules linked in: reiserfs nls_utf8 snd_pcm_oss snd_mixer_o= ss snd_seq snd_seq_device edd nfs lockd fscache nfs_acl auth_rpcgss sunrpc = radeon drm cpufreq_conservative cpufreq_userspace cpufreq_powersave powerno= w_k8 fuse xfs exportfs loop dm_mod snd_hda_codec_atihdmi snd_hda_codec_via = snd_hda_intel snd_hda_codec snd_hwdep snd_pcm ppdev snd_timer amd64_edac_mo= d ohci1394 parport_pc snd parport edac_core snd_page_alloc ieee1394 r8169 i= 2c_piix4 pcspkr sr_mod cdrom serio_raw asus_atk0110 button wmi sg ext4 jbd2= crc16 fan processor ide_pci_generic atiixp ide_core ata_generic pata_marve= ll pata_atiixp thermal thermal_sys [80852.450477] Pid: 14593, comm: mount Tainted: G D 2.6.31.8-0.1-va= nilla #1 [80852.450489] Call Trace: [80852.450501] [] warn_slowpath_common+0x80/0xd0 [80852.450514] [] warn_slowpath_null+0x22/0x40 [80852.450528] [] do_exit+0x36a/0x370 [80852.450540] [] ? print_oops_end_marker+0x31/0x50 [80852.450556] [] oops_end+0xd3/0x130 [80852.450570] [] no_context+0x10b/0x1a0 [80852.450583] [] __bad_area_nosemaphore+0x17d/0x230 [80852.450597] [] ? page_add_new_anon_rmap+0x6d/0x80 [80852.450613] [] ? default_spin_lock_flags+0x26/0x50 [80852.450627] [] ? __up_read+0xa9/0xf0 [80852.450640] [] __bad_area+0x5d/0x90 [80852.450653] [] bad_area+0x21/0x40 [80852.450664] [] do_page_fault+0x399/0x3b0 [80852.450678] [] page_fault+0x25/0x30 [80852.450692] [] ? memcpy_c+0x10/0x20 [80852.450705] [] ? match_number+0x6c/0xd0 [80852.450718] [] match_int+0x1e/0x40 [80852.450758] [] parse_options+0x1ab/0x8b0 [ext4] [80852.450774] [] ? __filemap_fdatawrite_range+0x5b/0x80 [80852.450816] [] ext4_remount+0xe6/0x4d0 [ext4] [80852.450831] [] do_remount_sb+0x7a/0x180 [80852.450842] [] do_remount+0x14e/0x170 [80852.450854] [] do_mount+0x1f2/0x240 [80852.450866] [] ? copy_mount_options+0x102/0x1b0 [80852.450879] [] sys_mount+0x9e/0x100 [80852.450892] [] system_call_fastpath+0x16/0x1b [80852.450903] ---[ end trace af3c39f272f308c0 ]--- [80853.547291] hda-intel: IRQ timing workaround is activated for card #1. S= uggest a bigger bdl_pos_adj. --Boundary-01=_wOVWLWnvPFxF0Fq-- --nextPart6486238.EUvpQ097YS Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) iEYEABECAAYFAktZU7AACgkQzhSR9xwSCbQJbACfQ13Je2af0hFhwTocA7tT/I7B /6IAn13fZFAglkV4ch4aSbpPs+dfB2vy =MfmP -----END PGP SIGNATURE----- --nextPart6486238.EUvpQ097YS-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/