Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756328Ab0AVStP (ORCPT ); Fri, 22 Jan 2010 13:49:15 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756246Ab0AVStK (ORCPT ); Fri, 22 Jan 2010 13:49:10 -0500 Received: from mx1.redhat.com ([209.132.183.28]:21268 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756243Ab0AVSsy (ORCPT ); Fri, 22 Jan 2010 13:48:54 -0500 From: Masami Hiramatsu Subject: [PATCH -tip v8 9/9] kprobes: Add documents of jump optimization To: Frederic Weisbecker , Ingo Molnar , Ananth N Mavinakayanahalli , lkml Cc: Ananth N Mavinakayanahalli , Ingo Molnar , Jim Keniston , Srikar Dronamraju , Christoph Hellwig , Steven Rostedt , Frederic Weisbecker , "H. Peter Anvin" , Anders Kaseorg , Tim Abbott , Andi Kleen , Jason Baron , Mathieu Desnoyers , systemtap , DLE Date: Fri, 22 Jan 2010 13:55:57 -0500 Message-ID: <20100122185557.9022.65862.stgit@dhcp-100-2-132.bos.redhat.com> In-Reply-To: <20100122185450.9022.87506.stgit@dhcp-100-2-132.bos.redhat.com> References: <20100122185450.9022.87506.stgit@dhcp-100-2-132.bos.redhat.com> User-Agent: StGIT/0.14.3 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13137 Lines: 306 Add documentations about kprobe jump optimization to Documentation/kprobes.txt. Changes in v8: - Update documentation and benchmark results. Signed-off-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Ingo Molnar Cc: Jim Keniston Cc: Srikar Dronamraju Cc: Christoph Hellwig Cc: Steven Rostedt Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Anders Kaseorg Cc: Tim Abbott Cc: Andi Kleen Cc: Jason Baron Cc: Mathieu Desnoyers --- Documentation/kprobes.txt | 191 ++++++++++++++++++++++++++++++++++++++++++--- 1 files changed, 178 insertions(+), 13 deletions(-) diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 053037a..48af218 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -1,6 +1,7 @@ Title : Kernel Probes (Kprobes) Authors : Jim Keniston : Prasanna S Panchamukhi + : Masami Hiramatsu CONTENTS @@ -14,6 +15,7 @@ CONTENTS 8. Kprobes Example 9. Jprobes Example 10. Kretprobes Example +11. Optimization Example Appendix A: The kprobes debugfs interface 1. Concepts: Kprobes, Jprobes, Return Probes @@ -42,13 +44,13 @@ registration/unregistration of a group of *probes. These functions can speed up unregistration process when you have to unregister a lot of probes at once. -The next three subsections explain how the different types of -probes work. They explain certain things that you'll need to -know in order to make the best use of Kprobes -- e.g., the -difference between a pre_handler and a post_handler, and how -to use the maxactive and nmissed fields of a kretprobe. But -if you're in a hurry to start using Kprobes, you can skip ahead -to section 2. +The next four subsections explain how the different types of +probes work and how the optimization works. They explain certain +things that you'll need to know in order to make the best use of +Kprobes -- e.g., the difference between a pre_handler and +a post_handler, and how to use the maxactive and nmissed fields of +a kretprobe. But if you're in a hurry to start using Kprobes, you +can skip ahead to section 2. 1.1 How Does a Kprobe Work? @@ -161,13 +163,109 @@ In case probed function is entered but there is no kretprobe_instance object available, then in addition to incrementing the nmissed count, the user entry_handler invocation is also skipped. +1.4 How Does the Optimization Work? + + If you configured kernel with CONFIG_OPTPROBES=y (currently this option is +supported on x86/x86-64, non-preemptive kernel) and +"debug.kprobes_optimization" sysctl sets 1, kprobes tries to use a +jump instruction instead of breakpoint instruction automatically. + +1.4.1 Init a Kprobe + + Before preparing optimization, Kprobes inserts original(user-defined) +kprobe on the specified address. So, even if the kprobe is not +possible to be optimized, it just uses a normal kprobe. + +1.4.2 Safety check + + First, Kprobes gets the address of probed function and checks whether the +optimized region, which will be replaced by a jump instruction, does NOT +straddle the function boundary, because if the optimized region reaches the +next function, its caller causes unexpected results. + Next, Kprobes decodes whole body of probed function and checks there is +NO indirect jump, NO instruction which will cause exception by checking +exception_tables (this will jump to fixup code and fixup code jumps into +same function body) and NO near jump which jumps into the optimized region +(except the 1st byte of jump), because if some jump instruction jumps +into the middle of another instruction, it causes unexpected results too. + Kprobes also measures the length of instructions which will be replaced +by a jump instruction, because a jump instruction is longer than 1 byte, +it may replaces multiple instructions, and it checks whether those +instructions can be executed out-of-line. + +1.4.3 Preparing detour buffer + + Then, Kprobes prepares "detour" buffer, which contains exception emulating +code (push/pop registers, call handler), copied instructions(Kprobes copies +instructions which will be replaced by a jump, to the detour buffer), and +a jump which jumps back to the original execution path. + +1.4.4 Pre-optimization + + After preparing detour buffer, Kprobes checks that the probe is *NOT* in +the below cases; + - The probe has either break_handler or post_handler. + - Other probes are probing the instructions which will be replaced by + a jump instruction. + - The probe is disabled. +In above cases, Kprobes just doesn't start optimizating the probe. + + If the kprobe can be optimized, Kprobes enqueues the kprobe to optimizing +list and kicks kprobe-optimizer workqueue to optimize it. To wait other +optimized probes, kprobe-optimizer will delay to work. + When the optimized-kprobe is hit before optimization, its handler changes +IP(instruction pointer) to copied code and exits. So, the instructions which +were copied to detour buffer are executed on the detour buffer. + +1.4.5 Optimization + + Kprobe-optimizer doesn't start instruction-replacing soon, it waits + synchronize_sched for safety, because some processors are possible to be + interrupted on the middle of instruction series (2nd or Nth instruction) + which will be replaced by a jump instruction(*). + As you know, synchronize_sched() can ensure that all interruptions which + were executed when synchronize_sched() was called are done, only if + CONFIG_PREEMPT=n. So, this version supports only the kernel with + CONFIG_PREEMPT=n.(**) + After that, kprobe-optimizer calls stop_machine() to replace probed- + instructions with a jump instruction by using text_poke_smp(). + +1.4.6 Unoptimization + When unregistering, disabling kprobe or being blocked by other kprobe, + an optimized-kprobe will be unoptimized. Before kprobe-optimizer runs, + the kprobe is just dequeued from the optimized list. When the optimization + has been done, it replaces a jump with int3 breakpoint and original code + by using text_poke_smp(). + +(*)Please imagine that 2nd instruction is interrupted and +optimizer replaces the 2nd instruction with jump *address* +while the interrupt handler is running. When the interrupt +returns to original address, there is no valid instructions +and it causes unexpected result. + +(**)This optimization-safety checking may be replaced with stop-machine +method which ksplice is done for supporting CONFIG_PREEMPT=y kernel. + +NOTE for geeks: +The jump optimization changes the kprobe's pre_handler behavior. +Without optimization, pre_handler can change kernel execution path by +changing regs->ip and return 1. However, after optimizing the probe, +that modification is ignored. Thus, if you'd like to tweak kernel +execution path, you need to avoid optimization. In that case, you can +choose either, + - Set empty function to post_handler or break_handler. + or + - Config CONFIG_OPTPROBES=n. + or + - Execute 'sysctl -w debug.kprobes_optimization=n' + 2. Architectures Supported Kprobes, jprobes, and return probes are implemented on the following architectures: -- i386 -- x86_64 (AMD-64, EM64T) +- i386 (Supports jump optimization) +- x86_64 (AMD-64, EM64T) (Supports jump optimization) - ppc64 - ia64 (Does not support probes on instruction slot1.) - sparc64 (Return probes not yet implemented.) @@ -193,6 +291,10 @@ it useful to "Compile the kernel with debug info" (CONFIG_DEBUG_INFO), so you can use "objdump -d -l vmlinux" to see the source-to-object code mapping. +If you want to reduce probing overhead, set "Kprobes jump optimization +support" (CONFIG_OPTPROBES) to "y". You can find this option under +"Kprobes" line. + 4. API Reference The Kprobes API includes a "register" function and an "unregister" @@ -387,9 +489,12 @@ the probe which has been registered. 5. Kprobes Features and Limitations -Kprobes allows multiple probes at the same address. Currently, -however, there cannot be multiple jprobes on the same function at -the same time. +Kprobes allows multiple probes at the same address even if it is optimized. +Currently, however, there cannot be multiple jprobes on the same function +at the same time. And also, optimized kprobes can not invoke the +post_handler and the break_handler. So if you attempt to install the probe +which has the the post_handler or the break_handler at the same address of +an optimized kprobe, the probe will be unoptimized automatically. In general, you can install a probe anywhere in the kernel. In particular, you can probe interrupt handlers. Known exceptions @@ -453,6 +558,37 @@ reason, Kprobes doesn't support return probes (or kprobes or jprobes) on the x86_64 version of __switch_to(); the registration functions return -EINVAL. +On x86/x86-64, since the Jump Optimization of Kprobes modifies instructions +widely, there are some limitations for optimization. To explain it, +we introduce some terminology. Image certain binary line which is +constructed by 2 byte instruction, 2byte instruction and 3byte instruction. + + IA + | +[-2][-1][0][1][2][3][4][5][6][7] + [ins1][ins2][ ins3 ] + [<- DCR ->] + [<- JTPR ->] + +ins1: 1st Instruction +ins2: 2nd Instruction +ins3: 3rd Instruction +IA: Insertion Address +JTPR: Jump Target Prohibition Region +DCR: Detoured Code Region + +The instructions in DCR are copied to the out-of-line buffer +of the djprobe instance, because the bytes in JTPR are replaced by +a jump instruction. So, there are several limitations. + +a) The instructions in DCR must be relocatable. +b) The instructions in DCR must not include call instruction. +c) JTPR must not be targeted by any jump or call instruction. +d) DCR must not straddle the border betweeen functions. + +Anyway, these limitations are checked by in-kernel instruction decoder, +so you don't need to care about that. + 6. Probe Overhead On a typical CPU in use in 2005, a kprobe hit takes 0.5 to 1.0 @@ -476,6 +612,19 @@ k = 0.49 usec; j = 0.76; r = 0.80; kr = 0.82; jr = 1.07 ppc64: POWER5 (gr), 1656 MHz (SMT disabled, 1 virtual CPU per physical CPU) k = 0.77 usec; j = 1.31; r = 1.26; kr = 1.45; jr = 1.99 +6.1 Optimized Probe Overhead + +Typically, an optimized kprobe hit takes 0.07 to 0.1 microseconds to +process. Here are sample overhead figures (in usec) for x86-64 architectures. +k = unoptimized kprobe, b = boosted(single-step skipped), o = optimized kprobe, +r = unoptimized kretprobe, rb = boosted kretprobe, ro = optimized kretprobe. + +i386: Intel(R) Xeon(R) E5410, 2.33GHz, 4656.90 bogomips +k = 0.80 usec; b = 0.33; o = 0.05; r = 1.10; rb = 0.61; ro = 0.33 + +x86-64: Intel(R) Xeon(R) E5410, 2.33GHz, 4656.90 bogomips +k = 0.99 usec; b = 0.43; o = 0.06; r = 1.24; rb = 0.68; ro = 0.30 + 7. TODO a. SystemTap (http://sourceware.org/systemtap): Provides a simplified @@ -523,7 +672,8 @@ is also specified. Following columns show probe status. If the probe is on a virtual address that is no longer valid (module init sections, module virtual addresses that correspond to modules that've been unloaded), such probes are marked with [GONE]. If the probe is temporarily disabled, -such probes are marked with [DISABLED]. +such probes are marked with [DISABLED]. If the probe is optimized, it is +marked with [OPTIMIZED]. /sys/kernel/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly. @@ -533,3 +683,18 @@ registered probes will be disarmed, till such time a "1" is echoed to this file. Note that this knob just disarms and arms all kprobes and doesn't change each probe's disabling state. This means that disabled kprobes (marked [DISABLED]) will be not enabled if you turn ON all kprobes by this knob. + + +Appendix B: The kprobes sysctl interface + +/proc/sys/debug/kprobes-optimization: Turn kprobes optimization ON/OFF. + +When CONFIG_OPTPROBES=y, this sysctl interface appears and it provides a knob +to globally and forcibly turn the jump optimization ON or OFF. By default, +jump optimization is allowed(ON). By echoing "0" to this file or By setting +0 to "debug.kprobes_optimization" via sysctl, all optimized probes will be +unoptimized. And new probes registered after that will not be optimized. +Note that this knob *Changes* the optimized state. This means that optimized +probes (marked [OPTIMIZED]) will be unoptimized ([OPTIMIZED] tag will be +removed). And after the knob is turned on, it will be optimized again. + -- Masami Hiramatsu Software Engineer Hitachi Computer Products (America), Inc. Software Solutions Division e-mail: mhiramat@redhat.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/