Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756131Ab0A2QOa (ORCPT ); Fri, 29 Jan 2010 11:14:30 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753577Ab0A2QIX (ORCPT ); Fri, 29 Jan 2010 11:08:23 -0500 Received: from mail-fx0-f220.google.com ([209.85.220.220]:53041 "EHLO mail-fx0-f220.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751011Ab0A2QIS (ORCPT ); Fri, 29 Jan 2010 11:08:18 -0500 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:date:message-id:in-reply-to:references:subject; b=n7vAT1rg2ryjNUBn84xa8s3sLvKXgEX6gZi0RFOXiLpwJrYDNWPG89OSgcKKLPEFfj CD3kSzm/Ael7ngiD+PpQun5n/1HwDmixj/kFEyqZD/ojKRNitErz+LjhLpBdN70zi/Bn Sfh6MQsEq/833UPCbFT69pyObYJR+IDRZF7dw= From: Bartlomiej Zolnierkiewicz To: linux-ide@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz , linux-kernel@vger.kernel.org Date: Fri, 29 Jan 2010 17:08:10 +0100 Message-Id: <20100129160810.21495.19266.sendpatchset@localhost> In-Reply-To: <20100129160308.21495.14120.sendpatchset@localhost> References: <20100129160308.21495.14120.sendpatchset@localhost> Subject: [PATCH 47/68] cs5535: convert to ide2libata Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5233 Lines: 167 From: Bartlomiej Zolnierkiewicz Subject: [PATCH] cs5535: convert to ide2libata Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/cs5535.c | 141 +-------------------------------------------------- 1 file changed, 4 insertions(+), 137 deletions(-) Index: b/drivers/ide/cs5535.c =================================================================== --- a/drivers/ide/cs5535.c +++ b/drivers/ide/cs5535.c @@ -28,145 +28,12 @@ #define DRV_NAME "cs5535" -#define MSR_ATAC_BASE 0x51300000 -#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) -#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) -#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) -#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) -#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) -#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) -#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) -#define ATAC_RESET (MSR_ATAC_BASE+0x10) -#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) -#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) -#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) -#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) -#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) -#define ATAC_BM0_CMD_PRIM 0x00 -#define ATAC_BM0_STS_PRIM 0x02 -#define ATAC_BM0_PRD 0x04 -#define CS5535_CABLE_DETECT 0x48 - -/* Format I PIO settings. We separate out cmd and data for safer timings */ - -static unsigned int cs5535_pio_cmd_timings[5] = -{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 }; -static unsigned int cs5535_pio_dta_timings[5] = -{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 }; - -static unsigned int cs5535_mwdma_timings[3] = -{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 }; - -static unsigned int cs5535_udma_timings[5] = -{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 }; - -/* Macros to check if the register is the reset value - reset value is an - invalid timing and indicates the register has not been set previously */ - -#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 ) -#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 ) - -/**** - * cs5535_set_speed - Configure the chipset to the new speed - * @drive: Drive to set up - * @speed: desired speed - * - * cs5535_set_speed() configures the chipset to a new speed. - */ -static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) -{ - u32 reg = 0, dummy; - u8 unit = drive->dn & 1; - - /* Set the PIO timings */ - if (speed < XFER_SW_DMA_0) { - ide_drive_t *pair = ide_get_pair_dev(drive); - u8 cmd, pioa; - - cmd = pioa = speed - XFER_PIO_0; - - if (pair) { - u8 piob = pair->pio_mode - XFER_PIO_0; - - if (piob < cmd) - cmd = piob; - } - - /* Write the speed of the current drive */ - reg = (cs5535_pio_cmd_timings[cmd] << 16) | - cs5535_pio_dta_timings[pioa]; - wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0); - - /* And if nessesary - change the speed of the other drive */ - rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy); - - if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) != - cs5535_pio_cmd_timings[cmd]) { - reg &= 0x0000FFFF; - reg |= cs5535_pio_cmd_timings[cmd] << 16; - wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0); - } - - /* Set bit 31 of the DMA register for PIO format 1 timings */ - rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); - wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, - reg | 0x80000000UL, 0); - } else { - rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); - - reg &= 0x80000000UL; /* Preserve the PIO format bit */ - - if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4) - reg |= cs5535_udma_timings[speed - XFER_UDMA_0]; - else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) - reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0]; - else - return; - - wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0); - } -} - -/** - * cs5535_set_dma_mode - set host controller for DMA mode - * @hwif: port - * @drive: drive - * - * Programs the chipset for DMA mode. - */ - -static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - cs5535_set_speed(drive, drive->dma_mode); -} - -/** - * cs5535_set_pio_mode - set host controller for PIO mode - * @hwif: port - * @drive: drive - * - * A callback from the upper layers for PIO-only tuning. - */ - -static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - cs5535_set_speed(drive, drive->pio_mode); -} - -static int cs5535_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 bit; - - /* if a 80 wire cable was detected */ - pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit); - - return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; -} +#include +#include "../ata/pata_cs5535.h" static const struct ide_port_ops cs5535_port_ops = { - .set_pio_mode = cs5535_set_pio_mode, - .set_dma_mode = cs5535_set_dma_mode, + .set_pio_mode = cs5535_set_piomode, + .set_dma_mode = cs5535_set_dmamode, .cable_detect = cs5535_cable_detect, }; -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/