Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752642Ab0A3TBN (ORCPT ); Sat, 30 Jan 2010 14:01:13 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751628Ab0A3TBM (ORCPT ); Sat, 30 Jan 2010 14:01:12 -0500 Received: from moutng.kundenserver.de ([212.227.17.9]:64753 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751422Ab0A3TBJ (ORCPT ); Sat, 30 Jan 2010 14:01:09 -0500 Date: Sat, 30 Jan 2010 20:01:02 +0100 From: Heinz Diehl To: "Rafael J. Wysocki" Cc: linux-kernel@vger.kernel.org Subject: Re: 2.6.33-rc6, swapper - not tainted Message-ID: <20100130190102.GA6776@fancy-poultry.org> References: <20100130183311.GA6464@fancy-poultry.org> <201001301940.11477.rjw@sisk.pl> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <201001301940.11477.rjw@sisk.pl> X-Accept-Language: no,dk,se,en,de Organization: private site X-OpenPGP-KeyID: 0xA9353F12 X-OpenPGP-Fingerprint: C67E 9A93 1033 DF8A 9321 9F90 DC39 B8C3 A935 3F12 X-OpenPGP-URL: http://www.fritha.org/htd.asc User-Agent: Mutt/1.5.20+20091213 (GNU/Linux) X-Provags-ID: V01U2FsdGVkX1/XMKBif/ZNtUolmPWO5wJ49e1Obh5J1pW+TYH OWEX/HJ8Pq3M2Mpy/V82LXNJSAe14T9YGUcgOW7ll2rzWZ5nbe PKaY5Ac/6V5r3Ikcof/jQ== Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 37869 Lines: 704 On 30.01.2010, Rafael J. Wysocki wrote: > It looks like you cut too much from the log. Can you please attach > the entire log? Yes, of course: Inspecting /boot/System.map-2.6.33-rc6 Cannot find map file. No module symbols loaded - kernel modules not enabled. Cannot build symbol table - disabling symbol lookups klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.33-rc6 (root@liesel) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (pclinux) ) #1 SMP PREEMPT Sat Jan 30 11:24:10 CET 2010 <6>Command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs <6>BIOS-provided physical RAM map: <6> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <6> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <6> BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) <6> BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) <6> BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) <6> BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) <6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) <6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) <6> BIOS-e820: 0000000100000000 - 0000000230000000 (usable) <6>NX (Execute Disable) protection: active <6>DMI 2.4 present. <6>No AGP bridge found <6>last_pfn = 0x230000 max_arch_pfn = 0x400000000 <7>MTRR default type: uncachable <7>MTRR fixed ranges enabled: <7> 00000-9FFFF write-back <7> A0000-BFFFF uncachable <7> C0000-C7FFF write-protect <7> C8000-FFFFF uncachable <7>MTRR variable ranges enabled: <7> 0 base 000000000000 mask FFFF80000000 write-back <7> 1 base 000080000000 mask FFFFC0000000 write-back <7> 2 base 0000C0000000 mask FFFFF0000000 write-back <7> 3 base 0000CFE00000 mask FFFFFFE00000 uncachable <7> 4 base 000100000000 mask FFFF00000000 write-back <7> 5 base 000200000000 mask FFFFE0000000 write-back <7> 6 base 000220000000 mask FFFFF0000000 write-back <7> 7 disabled <7>TOM2: 0000000230000000 aka 8960M <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <7>e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) <6>last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 <7>initial memory mapped : 0 - 20000000 <6>Using GB pages for direct mapping <6>init_memory_mapping: 0000000000000000-00000000cfde0000 <7> 0000000000 - 00c0000000 page 1G <7> 00c0000000 - 00cfc00000 page 2M <7> 00cfc00000 - 00cfde0000 page 4k <7>kernel direct mapping tables up to cfde0000 @ 8000-b000 <6>init_memory_mapping: 0000000100000000-0000000230000000 <7> 0100000000 - 0200000000 page 1G <7> 0200000000 - 0230000000 page 2M <7>kernel direct mapping tables up to 230000000 @ a000-c000 <6>RAMDISK: 37a10000 - 37fef537 <4>ACPI: RSDP 00000000000f6e30 00014 (v00 GBT ) <4>ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) <4>ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) <4>ACPI: DSDT 00000000cfde30c0 05E2B (v01 GBT GBTUACPI 00001000 MSFT 03000000) <4>ACPI: FACS 00000000cfde0000 00040 <4>ACPI: SSDT 00000000cfde8fc0 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) <4>ACPI: HPET 00000000cfde9880 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) <4>ACPI: MCFG 00000000cfde98c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) <4>ACPI: TAMG 00000000cfde9900 00302 (v01 GBT GBT B0 5455312E BG?? 53450101) <4>ACPI: APIC 00000000cfde8f00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) <7>ACPI: Local APIC address 0xfee00000 <6>No NUMA configuration found <6>Faking a node at 0000000000000000-0000000230000000 <6>Bootmem setup node 0 0000000000000000-0000000230000000 <6> NODE_DATA [000000000000b000 - 000000000003efff] <6> bootmap [000000000003f000 - 0000000000084fff] pages 46 <6>(9 early reservations) ==> bootmem [0000000000 - 0230000000] <6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6> #1 [0001000000 - 0005dca844] TEXT DATA BSS ==> [0001000000 - 0005dca844] <6> #2 [0037a10000 - 0037fef537] RAMDISK ==> [0037a10000 - 0037fef537] <6> #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] <6> #4 [0005dcb000 - 0005dcb0fe] BRK ==> [0005dcb000 - 0005dcb0fe] <6> #5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] <6> #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] <6> #7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] <6> #8 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] <7> [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 <4>Zone PFN ranges: <4> DMA 0x00000000 -> 0x00001000 <4> DMA32 0x00001000 -> 0x00100000 <4> Normal 0x00100000 -> 0x00230000 <4>Movable zone start PFN for each node <4>early_node_map[3] active PFN ranges <4> 0: 0x00000000 -> 0x0000009f <4> 0: 0x00000100 -> 0x000cfde0 <4> 0: 0x00100000 -> 0x00230000 <7>On node 0 totalpages: 2096511 <7> DMA zone: 56 pages used for memmap <7> DMA zone: 106 pages reserved <7> DMA zone: 3837 pages, LIFO batch:0 <7> DMA32 zone: 14280 pages used for memmap <7> DMA32 zone: 833048 pages, LIFO batch:31 <7> Normal zone: 17024 pages used for memmap <7> Normal zone: 1228160 pages, LIFO batch:31 <6>ACPI: PM-Timer IO Port: 0x4008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) <6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) <6>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <6>Using ACPI (MADT) for SMP configuration information <6>ACPI: HPET id: 0x10b9a201 base: 0xfed00000 <6>SMP: Allowing 4 CPUs, 0 hotplug CPUs <7>nr_irqs_gsi: 24 <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 <6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 <6>PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 <6>PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 <6>PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 <6>PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 <6>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 <6>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 <6>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 <6>Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) <6>setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 <6>PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79384 r8192 d23016 u524288 <6>pcpu-alloc: s79384 r8192 d23016 u524288 alloc=1*2097152 <6>pcpu-alloc: [0] 0 1 2 3 <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065045 <4>Policy zone: Normal <5>Kernel command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs <6>PID hash table entries: 4096 (order: 3, 32768 bytes) <6>Checking aperture... <6>No AGP bridge found <6>Node 0: aperture @ 20000000 size 32 MB <6>Aperture pointing to e820 RAM. Ignoring. <6>Your BIOS doesn't leave a aperture memory hole <6>Please enable the IOMMU option in the BIOS setup <6>This costs you 64 MB of RAM <6>Mapping aperture over 65536 KB of RAM @ 20000000 <6>PM: Registered nosave memory: 0000000020000000 - 0000000024000000 <6>Memory: 8051188k/9175040k available (4244k kernel code, 788996k absent, 334856k reserved, 3055k data, 1344k init) <6>Experimental preemptable hierarchical RCU implementation. <6>NR_IRQS:4352 <4>Console: colour dummy device 80x25 <6>console [tty0] enabled <7>hpet clockevent registered <4>Fast TSC calibration using PIT <4>Detected 2511.892 MHz processor. <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 5023.77 BogoMIPS (lpj=2511889) <6>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) <6>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) <4>Mount-cache hash table entries: 256 <7>tseg: 00cfe00000 <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <6>mce: CPU supports 6 MCE banks <6>using C1E aware idle routine <6>Performance Events: AMD PMU driver. <6>... version: 0 <6>... bit width: 48 <6>... generic registers: 4 <6>... value mask: 0000ffffffffffff <6>... max period: 00007fffffffffff <6>... fixed-purpose events: 0 <6>... event mask: 000000000000000f <6>ACPI: Core revision 20091214 <6>Setting APIC routing to flat <6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>CPU0: AMD Phenom(tm) II X4 905e Processor stepping 02 <6>Booting Node 0, Processors #1 #2 #3 Ok. <6>Brought up 4 CPUs <6>Total of 4 processors activated (20092.99 BogoMIPS). <6>NET: Registered protocol family 16 <7>node 0 link 0: io port [c000, ffff] <6>TOM: 00000000d0000000 aka 3328M <7>Fam 10h mmconf [e0000000, e00fffff] <7>node 0 link 0: mmio [a0000, bffff] <7>node 0 link 0: mmio [d0000000, dfffffff] <7>node 0 link 0: mmio [f0000000, fe02ffff] <7>node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] <6>TOM2: 0000000230000000 aka 8960M <7>bus: [00, 03] on node 0 link 0 <7>bus: 00 index 0 io port: [0, ffff] <7>bus: 00 index 1 mmio: [a0000, bffff] <7>bus: 00 index 2 mmio: [d0000000, dfffffff] <7>bus: 00 index 3 mmio: [e0400000, ffffffff] <7>bus: 00 index 4 mmio: [e0100000, e03fffff] <7>bus: 00 index 5 mmio: [230000000, fcffffffff] <6>ACPI: bus type pci registered <6>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) <6>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 <6>PCI: Using configuration type 1 for base access <4>bio: create slab at 0 <7>ACPI: EC: Look up EC in DSDT <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S1 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: No dock devices found. <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <6>pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] <6>pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] <6>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] <6>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] <6>pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfed0ffff] <7>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] <7>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold <7>pci 0000:00:02.0: PME# disabled <7>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold <7>pci 0000:00:0a.0: PME# disabled <7>pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] <7>pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] <7>pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] <7>pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] <7>pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] <7>pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] <7>pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] <7>pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] <7>pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] <7>pci 0000:00:12.2: supports D1 D2 <7>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot <7>pci 0000:00:12.2: PME# disabled <7>pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] <7>pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] <7>pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] <7>pci 0000:00:13.2: supports D1 D2 <7>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot <7>pci 0000:00:13.2: PME# disabled <7>pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] <7>pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] <7>pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] <7>pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] <7>pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] <7>pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] <7>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold <7>pci 0000:00:14.2: PME# disabled <7>pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] <7>pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff] <7>pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] <7>pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit] <7>pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] <7>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] <6>pci 0000:00:02.0: PCI bridge to [bus 01-01] <7>pci 0000:00:02.0: bridge window [io 0xe000-0xefff] <7>pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff] <7>pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] <7>pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] <7>pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] <7>pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref] <7>pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] <7>pci 0000:02:00.0: supports D1 D2 <7>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:02:00.0: PME# disabled <6>pci 0000:00:0a.0: PCI bridge to [bus 02-02] <7>pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] <7>pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] <7>pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] <7>pci 0000:03:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff] <7>pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff] <7>pci 0000:03:0e.0: supports D1 D2 <7>pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot <7>pci 0000:03:0e.0: PME# disabled <6>pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) <7>pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] <7>pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] <7>pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. <6>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none <6>vgaarb: loaded <6>PCI: Using ACPI for IRQ routing <7>PCI: pci_cache_line_size set to 64 bytes <3>pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] <6>pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit] <4>Expanded resource reserved due to conflict with PCI Bus 0000:00 <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 <6>hpet0: 4 comparators, 32-bit 14.318180 MHz counter <6>Switching to clocksource hpet <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <4>pnp 00:0d: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] <4>pnp 00:0d: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] <4>pnp 00:0d: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] <4>pnp 00:0d: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] <4>pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] <4>pnp 00:0d: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] <6>pnp: PnP ACPI: found 14 devices <6>ACPI: ACPI bus type pnp unregistered <6>system 00:01: [io 0x04d0-0x04d1] has been reserved <6>system 00:01: [io 0x0220-0x0225] has been reserved <6>system 00:01: [io 0x0290-0x0294] has been reserved <6>system 00:02: [io 0x4100-0x411f] has been reserved <6>system 00:02: [io 0x0228-0x022f] has been reserved <6>system 00:02: [io 0x0238-0x023f] has been reserved <6>system 00:02: [io 0x040b] has been reserved <6>system 00:02: [io 0x04d6] has been reserved <6>system 00:02: [io 0x0c00-0x0c01] has been reserved <6>system 00:02: [io 0x0c14] has been reserved <6>system 00:02: [io 0x0c50-0x0c52] has been reserved <6>system 00:02: [io 0x0c6c-0x0c6d] has been reserved <6>system 00:02: [io 0x0c6f] has been reserved <6>system 00:02: [io 0x0cd0-0x0cd1] has been reserved <6>system 00:02: [io 0x0cd2-0x0cd3] has been reserved <6>system 00:02: [io 0x0cd4-0x0cdf] has been reserved <6>system 00:02: [io 0x4000-0x40fe] has been reserved <6>system 00:02: [io 0x4210-0x4217] has been reserved <6>system 00:02: [io 0x0b00-0x0b0f] has been reserved <6>system 00:02: [io 0x0b10-0x0b1f] has been reserved <6>system 00:02: [io 0x0b20-0x0b3f] has been reserved <6>system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved <6>system 00:0d: [mem 0xcfde0000-0xcfdfffff] could not be reserved <6>system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved <6>system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved <6>system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved <6>system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved <6>pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref] <6>pci 0000:00:02.0: PCI bridge to [bus 01-01] <6>pci 0000:00:02.0: bridge window [io 0xe000-0xefff] <6>pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff] <6>pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] <6>pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref] <6>pci 0000:00:0a.0: PCI bridge to [bus 02-02] <6>pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] <6>pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] <6>pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] <6>pci 0000:00:14.4: PCI bridge to [bus 03-03] <6>pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] <6>pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] <6>pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] <6>pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 <7>pci 0000:00:02.0: setting latency timer to 64 <6>pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 <7>pci 0000:00:0a.0: setting latency timer to 64 <7>pci_bus 0000:00: resource 0 [io 0x0000-0x0cf7] <7>pci_bus 0000:00: resource 1 [io 0x0d00-0xffff] <7>pci_bus 0000:00: resource 2 [mem 0x000a0000-0x000bffff] <7>pci_bus 0000:00: resource 3 [mem 0x000c0000-0x000dffff] <7>pci_bus 0000:00: resource 4 [mem 0xcff00000-0xfed0ffff] <7>pci_bus 0000:01: resource 0 [io 0xe000-0xefff] <7>pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff] <7>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] <7>pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] <7>pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff] <7>pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] <7>pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] <7>pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] <7>pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref] <7>pci_bus 0000:03: resource 3 [io 0x0000-0x0cf7] <7>pci_bus 0000:03: resource 4 [io 0x0d00-0xffff] <7>pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] <7>pci_bus 0000:03: resource 6 [mem 0x000c0000-0x000dffff] <7>pci_bus 0000:03: resource 7 [mem 0xcff00000-0xfed0ffff] <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes) <6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) <6>TCP: Hash tables configured (established 524288 bind 65536) <6>TCP reno registered <6>UDP hash table entries: 4096 (order: 5, 131072 bytes) <6>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) <6>NET: Registered protocol family 1 <7>pci 0000:01:00.0: Boot video device <7>PCI: CLS 4 bytes, default 64 <6>Trying to unpack rootfs image as initramfs... <6>Freeing initrd memory: 6013k freed <6>PCI-DMA: Disabling AGP. <6>PCI-DMA: aperture base @ 20000000 size 65536 KB <6>PCI-DMA: using GART IOMMU. <6>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1264878799.525:1): initialized <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages <6>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled <6>Btrfs loaded <6>msgmni has been set to 15865 <6>alg: No test for stdrng (krng) <6>io scheduler noop registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <7>pcieport 0000:00:02.0: setting latency timer to 64 <7>pcieport 0000:00:02.0: irq 24 for MSI/MSI-X <7>pcieport 0000:00:0a.0: setting latency timer to 64 <7>pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X <6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 5120k, total 262144k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <4>Console: switching to colour frame buffer device 160x64 <6>fb0: VESA VGA frame buffer device <6>Non-volatile memory driver v1.3 <6>Linux agpgart interface v0.103 <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>brd: module loaded <4>Compaq SMART2 Driver (v 2.6.0) <6>HP CISS Driver (v 3.6.20) <6>MM: desc_per_page = 128 <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <4>Netfilter messages via NETLINK v0.30. <3>kmem_cache_create: duplicate cache ccid2_h <4>Pid: 1, comm: swapper Not tainted 2.6.33-rc6 #1 <4>Call Trace: <4> [] ? kmem_cache_create+0x4a0/0x550 <4> [] ? ccid_kmem_cache_create+0x5e/0x70 <4> [] ? ccid_initialize_builtins+0x59/0xb0 <4> [] ? dccp_init+0x376/0x3d7 <4> [] ? dccp_init+0x0/0x3d7 <4> [] ? do_one_initcall+0x35/0x190 <4> [] ? kernel_init+0x174/0x1ce <4> [] ? kernel_thread_helper+0x4/0x10 <4> [] ? kernel_init+0x0/0x1ce <4> [] ? kernel_thread_helper+0x0/0x10 <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <6>input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1 <4>registered taskstats version 1 <6>Freeing unused kernel memory: 1344k freed <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <6>Uniform Multi-Platform E-IDE driver <6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <6>fuse init (API version 7.13) <6>loop: module loaded <6>device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com <6>udevd version 128 started <6>rtc_cmos 00:05: RTC can wake from S4 <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <7>ahci 0000:00:11.0: version 3.0 <6>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <6>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode <6>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc <6>scsi0 : ahci <6>usbcore: registered new device driver usb <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 <6>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs <6>scsi1 : ahci <6>scsi2 : ahci <6>scsi3 : ahci <6>scsi4 : ahci <6>scsi5 : ahci <6>ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 <6>ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 <6>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 <6>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 <6>ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 <6>ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 <6>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <6>scsi6 : pata_atiixp <6>scsi7 : pata_atiixp <6>ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 <6>ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 <6>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <6>ehci_hcd 0000:00:12.2: EHCI Host Controller <6>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround <6>ehci_hcd 0000:00:12.2: debug port 1 <6>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 <6>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.33-rc6 ehci_hcd <6>usb usb1: SerialNumber: 0000:00:12.2 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 6 ports detected <6>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <6>ehci_hcd 0000:00:13.2: EHCI Host Controller <6>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 <6>ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround <6>ehci_hcd 0000:00:13.2: debug port 1 <6>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 <6>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: EHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.33-rc6 ehci_hcd <6>usb usb2: SerialNumber: 0000:00:13.2 <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 6 ports detected <6>ata5: SATA link down (SStatus 0 SControl 300) <6>ata6: SATA link down (SStatus 0 SControl 300) <6>ata4: SATA link down (SStatus 0 SControl 300) <6>usb 1-1: new high speed USB device using ehci_hcd and address 2 <3>ata3: softreset failed (device not ready) <3>ata2: softreset failed (device not ready) <4>ata2: applying SB600 PMP SRST workaround and retrying <4>ata3: applying SB600 PMP SRST workaround and retrying <6>usb 1-1: New USB device found, idVendor=07d1, idProduct=3c03 <6>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 1-1: Product: 802.11 bg WLAN <6>usb 1-1: Manufacturer: Ralink <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100, ATAPI AN <6>ata2.00: configured for UDMA/100 <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <6>ata3.00: ATA-8: OCZ SOLID_SSD, 02.10104, max UDMA/100 <6>ata3.00: 62586880 sectors, multi 0: LBA <6>ata3.00: configured for UDMA/100 <3>ata1: softreset failed (device not ready) <4>ata1: applying SB600 PMP SRST workaround and retrying <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <6>ata1.00: HPA detected: current 976771055, native 976773168 <6>ata1.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 <6>ata1.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA <6>ata1.00: configured for UDMA/133 <5>scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 <5>scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5 <5>scsi 2:0:0:0: Direct-Access ATA OCZ SOLID_SSD 02.1 PQ: 0 ANSI: 5 <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <5>sd 2:0:0:0: [sdb] 62586880 512-byte logical blocks: (32.0 GB/29.8 GiB) <5>sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 sda3 sda4 <6>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <5>sd 2:0:0:0: [sdb] Write Protect is off <7>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA <6> sdb: <5>sd 0:0:0:0: [sda] Attached SCSI disk <4> sdb1 <6>ohci_hcd 0000:00:12.0: OHCI Host Controller <5>sd 2:0:0:0: [sdb] Attached SCSI disk <6>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 <6>ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 <6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: OHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.33-rc6 ohci_hcd <6>usb usb3: SerialNumber: 0000:00:12.0 <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 3 ports detected <6>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <6>ohci_hcd 0000:00:12.1: OHCI Host Controller <6>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 <6>ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 <6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: OHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.33-rc6 ohci_hcd <6>usb usb4: SerialNumber: 0000:00:12.1 <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 3 ports detected <6>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 <6>ohci_hcd 0000:00:13.0: OHCI Host Controller <6>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 <6>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 <6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb5: Product: OHCI Host Controller <6>usb usb5: Manufacturer: Linux 2.6.33-rc6 ohci_hcd <6>usb usb5: SerialNumber: 0000:00:13.0 <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 3 ports detected <6>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 <6>ohci_hcd 0000:00:13.1: OHCI Host Controller <6>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 <6>ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 <6>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb6: Product: OHCI Host Controller <6>usb usb6: Manufacturer: Linux 2.6.33-rc6 ohci_hcd <6>usb usb6: SerialNumber: 0000:00:13.1 <6>hub 6-0:1.0: USB hub found <6>hub 6-0:1.0: 3 ports detected <6>ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 <6>ohci_hcd 0000:00:14.5: OHCI Host Controller <6>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 <6>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 <6>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb7: Product: OHCI Host Controller <6>usb usb7: Manufacturer: Linux 2.6.33-rc6 ohci_hcd <6>usb usb7: SerialNumber: 0000:00:14.5 <6>hub 7-0:1.0: USB hub found <6>hub 7-0:1.0: 2 ports detected <6>usb 3-2: new full speed USB device using ohci_hcd and address 2 <6>usb 3-2: New USB device found, idVendor=04a9, idProduct=220d <6>usb 3-2: New USB device strings: Mfr=64, Product=77, SerialNumber=0 <6>usb 3-2: Product: CanoScan <6>usb 3-2: Manufacturer: Canon <6>usb 4-2: new low speed USB device using ohci_hcd and address 2 <6>usb 4-2: New USB device found, idVendor=051d, idProduct=0002 <6>usb 4-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 <6>usb 4-2: Product: Back-UPS ES 700 FW:829.D2 .I USB FW:D2 <6>usb 4-2: Manufacturer: APC <6>usb 4-2: SerialNumber: 5B0825T20337 <6>usbcore: registered new interface driver hiddev <6>usb 4-3: new full speed USB device using ohci_hcd and address 3 <6>generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 700 FW:829.D2 .I USB FW:D2 ] on usb-0000:00:12.1-2/input0 <6>usbcore: registered new interface driver usbhid <6>usbhid: USB HID core driver <6>usb 4-3: New USB device found, idVendor=046d, idProduct=c52b <6>usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 4-3: Product: USB Receiver <6>usb 4-3: Manufacturer: Logitech <6>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input2 <6>generic-usb 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.1-3/input0 <6>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input3 <6>generic-usb 0003:046D:C52B.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-3/input1 <6>generic-usb 0003:046D:C52B.0004: hiddev98,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-3/input2 <6>alg: No test for xts(twofish) (xts(twofish-asm)) <5>XFS mounting filesystem dm-0 <7>Ending clean XFS mount for filesystem: dm-0 <6>udevd version 128 started <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>scsi 1:0:0:0: Attached scsi generic sg1 type 5 <5>sd 2:0:0:0: Attached scsi generic sg2 type 0 <6>input: PC Speaker as /devices/platform/pcspkr/input/input4 <4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 1:0:0:0: Attached scsi CD-ROM sr0 <6>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 <6>ACPI: Power Button [PWRB] <6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 <6>ACPI: Power Button [PWRF] <6>parport_pc 00:09: reported by Plug and Play ACPI <6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] <6>cfg80211: Using static regulatory domain info <6>cfg80211: Regulatory domain: 00 <6> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) <6> (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) <6> (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) <6> (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) <6> (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) <6> (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) <6>cfg80211: Calling CRDA to update world regulatory domain <6>cfg80211: Calling CRDA for country: EU <6>firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <3>ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] <6>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver <6>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded <6>r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 <7>r8169 0000:02:00.0: setting latency timer to 64 <7>r8169 0000:02:00.0: irq 26 for MSI/MSI-X <6>eth0: RTL8168c/8111c at 0xffffc900117ae000, 00:1f:d0:be:4c:a5, XID 1c4000c0 IRQ 26 <3>k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled <6>udev: renamed network interface eth0 to eth1 <5>firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI version 1.10 <6>ppdev: user-space parallel port driver <3>Error: Driver 'pcspkr' is already registered, aborting... <6>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <6>hda_codec: ALC888: BIOS auto-probing. <7>ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) <7>ALSA sound/pci/hda/hda_codec.c:4288: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:4292: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:4293: mono: mono_out=0x0 <7>ALSA sound/pci/hda/hda_codec.c:4296: dig-out=0x1e/0x0 <7>ALSA sound/pci/hda/hda_codec.c:4304: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0 <7>ALSA sound/pci/hda/hda_codec.c:4306: dig-in=0x1f <7>ALSA sound/pci/hda/patch_realtek.c:1309: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888 <5>firewire_core: created device fw0: GUID 0069a46900001d7d, S400 <7>phy0 -> rt73usb_validate_eeprom: EEPROM recovery - NIC: 0xffef <7>phy0 -> rt73usb_validate_eeprom: EEPROM recovery - Led: 0xe000 <7>phy0 -> rt73usb_validate_eeprom: EEPROM recovery - RSSI OFFSET A: 0x0000 <6>phy0 -> rt2x00_print_chip: Info - Chipset detected - rt: 1300, rf: 0002, rev: 0002573a. <7>phy0: Selected rate control algorithm 'minstrel' <6>Registered led device: rt73usb-phy0::radio <6>Registered led device: rt73usb-phy0::assoc <6>Registered led device: rt73usb-phy0::quality <6>usbcore: registered new interface driver rt73usb <6>uhci_hcd: USB Universal Host Controller Interface driver <5>XFS mounting filesystem dm-2 <7>Ending clean XFS mount for filesystem: dm-2 <5>XFS mounting filesystem dm-3 <7>Ending clean XFS mount for filesystem: dm-3 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/