Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754563Ab0A3UAz (ORCPT ); Sat, 30 Jan 2010 15:00:55 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751400Ab0A3UAx (ORCPT ); Sat, 30 Jan 2010 15:00:53 -0500 Received: from ogre.sisk.pl ([217.79.144.158]:47241 "EHLO ogre.sisk.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751236Ab0A3UAw (ORCPT ); Sat, 30 Jan 2010 15:00:52 -0500 From: "Rafael J. Wysocki" To: Heinz Diehl Subject: Re: 2.6.33-rc6, swapper - not tainted Date: Sat, 30 Jan 2010 21:01:42 +0100 User-Agent: KMail/1.12.4 (Linux/2.6.33-rc6-rjw; KDE/4.3.5; x86_64; ; ) Cc: linux-kernel@vger.kernel.org, NetDev References: <20100130183311.GA6464@fancy-poultry.org> <201001301940.11477.rjw@sisk.pl> <20100130190102.GA6776@fancy-poultry.org> In-Reply-To: <20100130190102.GA6776@fancy-poultry.org> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201001302101.42993.rjw@sisk.pl> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24822 Lines: 455 On Saturday 30 January 2010, Heinz Diehl wrote: > On 30.01.2010, Rafael J. Wysocki wrote: > > > It looks like you cut too much from the log. Can you please attach > > the entire log? > > Yes, of course: > > Inspecting /boot/System.map-2.6.33-rc6 > Cannot find map file. > No module symbols loaded - kernel modules not enabled. > > Cannot build symbol table - disabling symbol lookups > klogd 1.4.1, log source = ksyslog started. > <5>Linux version 2.6.33-rc6 (root@liesel) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (pclinux) ) #1 SMP PREEMPT Sat Jan 30 11:24:10 CET 2010 > <6>Command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs > <6>BIOS-provided physical RAM map: > <6> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > <6> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > <6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > <6> BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) > <6> BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) > <6> BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) > <6> BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) > <6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > <6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > <6> BIOS-e820: 0000000100000000 - 0000000230000000 (usable) > <6>NX (Execute Disable) protection: active > <6>DMI 2.4 present. > <6>No AGP bridge found > <6>last_pfn = 0x230000 max_arch_pfn = 0x400000000 > <7>MTRR default type: uncachable > <7>MTRR fixed ranges enabled: > <7> 00000-9FFFF write-back > <7> A0000-BFFFF uncachable > <7> C0000-C7FFF write-protect > <7> C8000-FFFFF uncachable > <7>MTRR variable ranges enabled: > <7> 0 base 000000000000 mask FFFF80000000 write-back > <7> 1 base 000080000000 mask FFFFC0000000 write-back > <7> 2 base 0000C0000000 mask FFFFF0000000 write-back > <7> 3 base 0000CFE00000 mask FFFFFFE00000 uncachable > <7> 4 base 000100000000 mask FFFF00000000 write-back > <7> 5 base 000200000000 mask FFFFE0000000 write-back > <7> 6 base 000220000000 mask FFFFF0000000 write-back > <7> 7 disabled > <7>TOM2: 0000000230000000 aka 8960M > <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > <7>e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) > <6>last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 > <7>initial memory mapped : 0 - 20000000 > <6>Using GB pages for direct mapping > <6>init_memory_mapping: 0000000000000000-00000000cfde0000 > <7> 0000000000 - 00c0000000 page 1G > <7> 00c0000000 - 00cfc00000 page 2M > <7> 00cfc00000 - 00cfde0000 page 4k > <7>kernel direct mapping tables up to cfde0000 @ 8000-b000 > <6>init_memory_mapping: 0000000100000000-0000000230000000 > <7> 0100000000 - 0200000000 page 1G > <7> 0200000000 - 0230000000 page 2M > <7>kernel direct mapping tables up to 230000000 @ a000-c000 > <6>RAMDISK: 37a10000 - 37fef537 > <4>ACPI: RSDP 00000000000f6e30 00014 (v00 GBT ) > <4>ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) > <4>ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) > <4>ACPI: DSDT 00000000cfde30c0 05E2B (v01 GBT GBTUACPI 00001000 MSFT 03000000) > <4>ACPI: FACS 00000000cfde0000 00040 > <4>ACPI: SSDT 00000000cfde8fc0 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) > <4>ACPI: HPET 00000000cfde9880 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) > <4>ACPI: MCFG 00000000cfde98c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) > <4>ACPI: TAMG 00000000cfde9900 00302 (v01 GBT GBT B0 5455312E BG?? 53450101) > <4>ACPI: APIC 00000000cfde8f00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) > <7>ACPI: Local APIC address 0xfee00000 > <6>No NUMA configuration found > <6>Faking a node at 0000000000000000-0000000230000000 > <6>Bootmem setup node 0 0000000000000000-0000000230000000 > <6> NODE_DATA [000000000000b000 - 000000000003efff] > <6> bootmap [000000000003f000 - 0000000000084fff] pages 46 > <6>(9 early reservations) ==> bootmem [0000000000 - 0230000000] > <6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > <6> #1 [0001000000 - 0005dca844] TEXT DATA BSS ==> [0001000000 - 0005dca844] > <6> #2 [0037a10000 - 0037fef537] RAMDISK ==> [0037a10000 - 0037fef537] > <6> #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] > <6> #4 [0005dcb000 - 0005dcb0fe] BRK ==> [0005dcb000 - 0005dcb0fe] > <6> #5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] > <6> #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] > <6> #7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] > <6> #8 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] > <7> [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 > <4>Zone PFN ranges: > <4> DMA 0x00000000 -> 0x00001000 > <4> DMA32 0x00001000 -> 0x00100000 > <4> Normal 0x00100000 -> 0x00230000 > <4>Movable zone start PFN for each node > <4>early_node_map[3] active PFN ranges > <4> 0: 0x00000000 -> 0x0000009f > <4> 0: 0x00000100 -> 0x000cfde0 > <4> 0: 0x00100000 -> 0x00230000 > <7>On node 0 totalpages: 2096511 > <7> DMA zone: 56 pages used for memmap > <7> DMA zone: 106 pages reserved > <7> DMA zone: 3837 pages, LIFO batch:0 > <7> DMA32 zone: 14280 pages used for memmap > <7> DMA32 zone: 833048 pages, LIFO batch:31 > <7> Normal zone: 17024 pages used for memmap > <7> Normal zone: 1228160 pages, LIFO batch:31 > <6>ACPI: PM-Timer IO Port: 0x4008 > <7>ACPI: Local APIC address 0xfee00000 > <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > <6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) > <6>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) > <6>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > <6>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) > <6>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) > <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > <6>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 > <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > <7>ACPI: IRQ0 used by override. > <7>ACPI: IRQ2 used by override. > <7>ACPI: IRQ9 used by override. > <6>Using ACPI (MADT) for SMP configuration information > <6>ACPI: HPET id: 0x10b9a201 base: 0xfed00000 > <6>SMP: Allowing 4 CPUs, 0 hotplug CPUs > <7>nr_irqs_gsi: 24 > <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 > <6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > <6>PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 > <6>PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 > <6>PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 > <6>PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 > <6>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 > <6>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 > <6>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 > <6>Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) > <6>setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 > <6>PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79384 r8192 d23016 u524288 > <6>pcpu-alloc: s79384 r8192 d23016 u524288 alloc=1*2097152 > <6>pcpu-alloc: [0] 0 1 2 3 > <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065045 > <4>Policy zone: Normal > <5>Kernel command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs > <6>PID hash table entries: 4096 (order: 3, 32768 bytes) > <6>Checking aperture... > <6>No AGP bridge found > <6>Node 0: aperture @ 20000000 size 32 MB > <6>Aperture pointing to e820 RAM. Ignoring. > <6>Your BIOS doesn't leave a aperture memory hole > <6>Please enable the IOMMU option in the BIOS setup > <6>This costs you 64 MB of RAM > <6>Mapping aperture over 65536 KB of RAM @ 20000000 > <6>PM: Registered nosave memory: 0000000020000000 - 0000000024000000 > <6>Memory: 8051188k/9175040k available (4244k kernel code, 788996k absent, 334856k reserved, 3055k data, 1344k init) > <6>Experimental preemptable hierarchical RCU implementation. > <6>NR_IRQS:4352 > <4>Console: colour dummy device 80x25 > <6>console [tty0] enabled > <7>hpet clockevent registered > <4>Fast TSC calibration using PIT > <4>Detected 2511.892 MHz processor. > <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 5023.77 BogoMIPS (lpj=2511889) > <6>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) > <6>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) > <4>Mount-cache hash table entries: 256 > <7>tseg: 00cfe00000 > <6>CPU: Physical Processor ID: 0 > <6>CPU: Processor Core ID: 0 > <6>mce: CPU supports 6 MCE banks > <6>using C1E aware idle routine > <6>Performance Events: AMD PMU driver. > <6>... version: 0 > <6>... bit width: 48 > <6>... generic registers: 4 > <6>... value mask: 0000ffffffffffff > <6>... max period: 00007fffffffffff > <6>... fixed-purpose events: 0 > <6>... event mask: 000000000000000f > <6>ACPI: Core revision 20091214 > <6>Setting APIC routing to flat > <6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > <6>CPU0: AMD Phenom(tm) II X4 905e Processor stepping 02 > <6>Booting Node 0, Processors #1 #2 #3 Ok. > <6>Brought up 4 CPUs > <6>Total of 4 processors activated (20092.99 BogoMIPS). > <6>NET: Registered protocol family 16 > <7>node 0 link 0: io port [c000, ffff] > <6>TOM: 00000000d0000000 aka 3328M > <7>Fam 10h mmconf [e0000000, e00fffff] > <7>node 0 link 0: mmio [a0000, bffff] > <7>node 0 link 0: mmio [d0000000, dfffffff] > <7>node 0 link 0: mmio [f0000000, fe02ffff] > <7>node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] > <6>TOM2: 0000000230000000 aka 8960M > <7>bus: [00, 03] on node 0 link 0 > <7>bus: 00 index 0 io port: [0, ffff] > <7>bus: 00 index 1 mmio: [a0000, bffff] > <7>bus: 00 index 2 mmio: [d0000000, dfffffff] > <7>bus: 00 index 3 mmio: [e0400000, ffffffff] > <7>bus: 00 index 4 mmio: [e0100000, e03fffff] > <7>bus: 00 index 5 mmio: [230000000, fcffffffff] > <6>ACPI: bus type pci registered > <6>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) > <6>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 > <6>PCI: Using configuration type 1 for base access > <4>bio: create slab at 0 > <7>ACPI: EC: Look up EC in DSDT > <6>ACPI: Interpreter enabled > <6>ACPI: (supports S0 S1 S4 S5) > <6>ACPI: Using IOAPIC for interrupt routing > <6>ACPI: No dock devices found. > <6>ACPI: PCI Root Bridge [PCI0] (0000:00) > <6>pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] > <6>pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] > <6>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] > <6>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] > <6>pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfed0ffff] > <7>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] > <7>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold > <7>pci 0000:00:02.0: PME# disabled > <7>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold > <7>pci 0000:00:0a.0: PME# disabled > <7>pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] > <7>pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] > <7>pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] > <7>pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] > <7>pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] > <7>pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] > <7>pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] > <7>pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] > <7>pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] > <7>pci 0000:00:12.2: supports D1 D2 > <7>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot > <7>pci 0000:00:12.2: PME# disabled > <7>pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] > <7>pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] > <7>pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] > <7>pci 0000:00:13.2: supports D1 D2 > <7>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot > <7>pci 0000:00:13.2: PME# disabled > <7>pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] > <7>pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] > <7>pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] > <7>pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] > <7>pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] > <7>pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] > <7>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold > <7>pci 0000:00:14.2: PME# disabled > <7>pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] > <7>pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff] > <7>pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] > <7>pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit] > <7>pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] > <7>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] > <6>pci 0000:00:02.0: PCI bridge to [bus 01-01] > <7>pci 0000:00:02.0: bridge window [io 0xe000-0xefff] > <7>pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff] > <7>pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] > <7>pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] > <7>pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] > <7>pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref] > <7>pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] > <7>pci 0000:02:00.0: supports D1 D2 > <7>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold > <7>pci 0000:02:00.0: PME# disabled > <6>pci 0000:00:0a.0: PCI bridge to [bus 02-02] > <7>pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] > <7>pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] > <7>pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] > <7>pci 0000:03:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff] > <7>pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff] > <7>pci 0000:03:0e.0: supports D1 D2 > <7>pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot > <7>pci 0000:03:0e.0: PME# disabled > <6>pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) > <7>pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] > <7>pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] > <7>pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] > <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] > <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] > <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] > <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. > <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. > <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. > <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. > <6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. > <6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. > <6>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. > <6>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. > <6>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none > <6>vgaarb: loaded > <6>PCI: Using ACPI for IRQ routing > <7>PCI: pci_cache_line_size set to 64 bytes > <3>pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] > <6>pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit] > <4>Expanded resource reserved due to conflict with PCI Bus 0000:00 > <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > <6>hpet0: 4 comparators, 32-bit 14.318180 MHz counter > <6>Switching to clocksource hpet > <6>pnp: PnP ACPI init > <6>ACPI: bus type pnp registered > <4>pnp 00:0d: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] > <4>pnp 00:0d: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] > <4>pnp 00:0d: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] > <4>pnp 00:0d: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] > <4>pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] > <4>pnp 00:0d: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] > <6>pnp: PnP ACPI: found 14 devices > <6>ACPI: ACPI bus type pnp unregistered > <6>system 00:01: [io 0x04d0-0x04d1] has been reserved > <6>system 00:01: [io 0x0220-0x0225] has been reserved > <6>system 00:01: [io 0x0290-0x0294] has been reserved > <6>system 00:02: [io 0x4100-0x411f] has been reserved > <6>system 00:02: [io 0x0228-0x022f] has been reserved > <6>system 00:02: [io 0x0238-0x023f] has been reserved > <6>system 00:02: [io 0x040b] has been reserved > <6>system 00:02: [io 0x04d6] has been reserved > <6>system 00:02: [io 0x0c00-0x0c01] has been reserved > <6>system 00:02: [io 0x0c14] has been reserved > <6>system 00:02: [io 0x0c50-0x0c52] has been reserved > <6>system 00:02: [io 0x0c6c-0x0c6d] has been reserved > <6>system 00:02: [io 0x0c6f] has been reserved > <6>system 00:02: [io 0x0cd0-0x0cd1] has been reserved > <6>system 00:02: [io 0x0cd2-0x0cd3] has been reserved > <6>system 00:02: [io 0x0cd4-0x0cdf] has been reserved > <6>system 00:02: [io 0x4000-0x40fe] has been reserved > <6>system 00:02: [io 0x4210-0x4217] has been reserved > <6>system 00:02: [io 0x0b00-0x0b0f] has been reserved > <6>system 00:02: [io 0x0b10-0x0b1f] has been reserved > <6>system 00:02: [io 0x0b20-0x0b3f] has been reserved > <6>system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved > <6>system 00:0d: [mem 0xcfde0000-0xcfdfffff] could not be reserved > <6>system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved > <6>system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved > <6>system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved > <6>system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved > <6>pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref] > <6>pci 0000:00:02.0: PCI bridge to [bus 01-01] > <6>pci 0000:00:02.0: bridge window [io 0xe000-0xefff] > <6>pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff] > <6>pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] > <6>pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref] > <6>pci 0000:00:0a.0: PCI bridge to [bus 02-02] > <6>pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] > <6>pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] > <6>pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] > <6>pci 0000:00:14.4: PCI bridge to [bus 03-03] > <6>pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] > <6>pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] > <6>pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] > <6>pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > <7>pci 0000:00:02.0: setting latency timer to 64 > <6>pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > <7>pci 0000:00:0a.0: setting latency timer to 64 > <7>pci_bus 0000:00: resource 0 [io 0x0000-0x0cf7] > <7>pci_bus 0000:00: resource 1 [io 0x0d00-0xffff] > <7>pci_bus 0000:00: resource 2 [mem 0x000a0000-0x000bffff] > <7>pci_bus 0000:00: resource 3 [mem 0x000c0000-0x000dffff] > <7>pci_bus 0000:00: resource 4 [mem 0xcff00000-0xfed0ffff] > <7>pci_bus 0000:01: resource 0 [io 0xe000-0xefff] > <7>pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff] > <7>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] > <7>pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] > <7>pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff] > <7>pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] > <7>pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] > <7>pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] > <7>pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref] > <7>pci_bus 0000:03: resource 3 [io 0x0000-0x0cf7] > <7>pci_bus 0000:03: resource 4 [io 0x0d00-0xffff] > <7>pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] > <7>pci_bus 0000:03: resource 6 [mem 0x000c0000-0x000dffff] > <7>pci_bus 0000:03: resource 7 [mem 0xcff00000-0xfed0ffff] > <6>NET: Registered protocol family 2 > <6>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) > <6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > <6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > <6>TCP: Hash tables configured (established 524288 bind 65536) > <6>TCP reno registered > <6>UDP hash table entries: 4096 (order: 5, 131072 bytes) > <6>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) > <6>NET: Registered protocol family 1 > <7>pci 0000:01:00.0: Boot video device > <7>PCI: CLS 4 bytes, default 64 > <6>Trying to unpack rootfs image as initramfs... > <6>Freeing initrd memory: 6013k freed > <6>PCI-DMA: Disabling AGP. > <6>PCI-DMA: aperture base @ 20000000 size 65536 KB > <6>PCI-DMA: using GART IOMMU. > <6>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture > <6>audit: initializing netlink socket (disabled) > <5>type=2000 audit(1264878799.525:1): initialized > <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages > <6>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled > <6>Btrfs loaded > <6>msgmni has been set to 15865 > <6>alg: No test for stdrng (krng) > <6>io scheduler noop registered > <6>io scheduler deadline registered > <6>io scheduler cfq registered (default) > <7>pcieport 0000:00:02.0: setting latency timer to 64 > <7>pcieport 0000:00:02.0: irq 24 for MSI/MSI-X > <7>pcieport 0000:00:0a.0: setting latency timer to 64 > <7>pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X > <6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 5120k, total 262144k > <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1 > <6>vesafb: scrolling: redraw > <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > <4>Console: switching to colour frame buffer device 160x64 > <6>fb0: VESA VGA frame buffer device > <6>Non-volatile memory driver v1.3 > <6>Linux agpgart interface v0.103 > <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > <6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > <6>brd: module loaded > <4>Compaq SMART2 Driver (v 2.6.0) > <6>HP CISS Driver (v 3.6.20) > <6>MM: desc_per_page = 128 > <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > <6>serio: i8042 KBD port at 0x60,0x64 irq 1 > <6>serio: i8042 AUX port at 0x60,0x64 irq 12 > <6>mice: PS/2 mouse device common for all mice > <6>cpuidle: using governor ladder > <6>cpuidle: using governor menu > <4>Netfilter messages via NETLINK v0.30. > <3>kmem_cache_create: duplicate cache ccid2_h > <4>Pid: 1, comm: swapper Not tainted 2.6.33-rc6 #1 > <4>Call Trace: > <4> [] ? kmem_cache_create+0x4a0/0x550 > <4> [] ? ccid_kmem_cache_create+0x5e/0x70 > <4> [] ? ccid_initialize_builtins+0x59/0xb0 > <4> [] ? dccp_init+0x376/0x3d7 > <4> [] ? dccp_init+0x0/0x3d7 > <4> [] ? do_one_initcall+0x35/0x190 > <4> [] ? kernel_init+0x174/0x1ce > <4> [] ? kernel_thread_helper+0x4/0x10 > <4> [] ? kernel_init+0x0/0x1ce > <4> [] ? kernel_thread_helper+0x0/0x10 > <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 > <6>input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1 > <4>registered taskstats version 1 > <6>Freeing unused kernel memory: 1344k freed It looks like a DCCP initialization issue, so CCint netdev. Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/