Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933081Ab0BDXaA (ORCPT ); Thu, 4 Feb 2010 18:30:00 -0500 Received: from mho-02-ewr.mailhop.org ([204.13.248.72]:58358 "EHLO mho-02-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932660Ab0BDX34 (ORCPT ); Thu, 4 Feb 2010 18:29:56 -0500 X-Mail-Handler: MailHop Outbound by DynDNS X-Originating-IP: 72.249.23.125 X-Report-Abuse-To: abuse@dyndns.com (see http://www.dyndns.com/services/mailhop/outbound_abuse.html for abuse reporting information) X-MHO-User: U2FsdGVkX18/Mp/sHN93pFuqyfLwkN/p Date: Thu, 4 Feb 2010 15:30:19 -0800 From: Tony Lindgren To: Stephen Rothwell Cc: linux-omap@vger.kernel.org, linux-next@vger.kernel.org, linux-kernel@vger.kernel.org, Russell King Subject: Re: linux-next: manual merge of the omap tree with the arm tree Message-ID: <20100204233019.GY22747@atomide.com> References: <20100205102030.c8b139a1.sfr@canb.auug.org.au> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20100205102030.c8b139a1.sfr@canb.auug.org.au> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7150 Lines: 209 * Stephen Rothwell [100204 15:17]: > Hi all, > > Today's linux-next merge of the omap tree got a conflict in > arch/arm/mach-omap1/include/mach/debug-macro.S > arch/arm/mach-omap2/include/mach/debug-macro.S between commit > 7f62dc4756eaf761570b96250630d48f80397d64 ("ARM: 5910/1: ARM: Add tmp > register for addruart and loadsp") from the arm tree and commit 209f5d2d2c8e385834d138ac593df86504a28ffe ("omap: Make > uncompress code and DEBUG_LL code generic") from the omap tree. > > I fixed it up (see below) and can carry the fix as necessary. Thanks, I'll sort it out in omap for-next tree so they merge cleanly. Tony > -- > Cheers, > Stephen Rothwell sfr@canb.auug.org.au > > diff --cc arch/arm/mach-omap1/include/mach/debug-macro.S > index 8c74cab,0187391..0000000 > --- a/arch/arm/mach-omap1/include/mach/debug-macro.S > +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S > @@@ -11,7 -11,43 +11,43 @@@ > * > */ > > + #include > + > + #include > + > + .pushsection .data > + omap_uart_phys: .word 0x0 > + omap_uart_virt: .word 0x0 > + .popsection > + > + /* > + * Note that this code won't work if the bootloader passes > + * a wrong machine ID number in r1. To debug, just hardcode > + * the desired UART phys and virt addresses temporarily into > + * the omap_uart_phys and omap_uart_virt above. > + */ > - .macro addruart,rx > + .macro addruart, rx, tmp > + > + /* Use omap_uart_phys/virt if already configured */ > + 9: mrc p15, 0, \rx, c1, c0 > + tst \rx, #1 @ MMU enabled? > + ldreq \rx, =omap_uart_phys @ physical base address > + ldrne \rx, =omap_uart_virt @ virtual base > + ldr \rx, [\rx, #0] > + cmp \rx, #0 @ is port configured? > + bne 99f @ already configured > + > + /* Check 7XX UART1 scratchpad register for uart to use */ > + mrc p15, 0, \rx, c1, c0 > + tst \rx, #1 @ MMU enabled? > + moveq \rx, #0xff000000 @ physical base address > + movne \rx, #0xfe000000 @ virtual base > + orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 > + ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)] > + cmp \rx, #0 @ anything in 7XX scratchpad? > + bne 10f @ found 7XX uart > + > + /* Check 15xx/16xx UART1 scratchpad register for uart to use */ > mrc p15, 0, \rx, c1, c0 > tst \rx, #1 @ MMU enabled? > moveq \rx, #0xff000000 @ physical base address > diff --cc arch/arm/mach-omap2/include/mach/debug-macro.S > index 86979d7,eb05a22..0000000 > --- a/arch/arm/mach-omap2/include/mach/debug-macro.S > +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S > @@@ -11,32 -11,107 +11,107 @@@ > * > */ > > + #include > + > + #include > + > + #define UART_OFFSET(addr) ((addr) & 0x00ffffff) > + > + .pushsection .data > + omap_uart_phys: .word 0 > + omap_uart_virt: .word 0 > + omap_uart_lsr: .word 0 > + .popsection > + > + /* > + * Note that this code won't work if the bootloader passes > + * a wrong machine ID number in r1. To debug, just hardcode > + * the desired UART phys and virt addresses temporarily into > + * the omap_uart_phys and omap_uart_virt above. > + */ > - .macro addruart,rx > + .macro addruart, rx, tmp > + > + /* Use omap_uart_phys/virt if already configured */ > + 10: mrc p15, 0, \rx, c1, c0 > + tst \rx, #1 @ MMU enabled? > + ldreq \rx, =omap_uart_phys @ physical base address > + ldrne \rx, =omap_uart_virt @ virtual base address > + ldr \rx, [\rx, #0] > + cmp \rx, #0 @ is port configured? > + bne 99f @ already configured > + > + /* Check UART1 scratchpad register for uart to use */ > mrc p15, 0, \rx, c1, c0 > tst \rx, #1 @ MMU enabled? > - #ifdef CONFIG_ARCH_OMAP2 > moveq \rx, #0x48000000 @ physical base address > movne \rx, #0xfa000000 @ virtual base > - orr \rx, \rx, #0x0006a000 > - #ifdef CONFIG_OMAP_LL_DEBUG_UART2 > - add \rx, \rx, #0x00002000 @ UART 2 > - #endif > - #ifdef CONFIG_OMAP_LL_DEBUG_UART3 > - add \rx, \rx, #0x00004000 @ UART 3 > - #endif > - > - #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) > - moveq \rx, #0x48000000 @ physical base address > - movne \rx, #0xfa000000 @ virtual base > - orr \rx, \rx, #0x0006a000 > - #ifdef CONFIG_OMAP_LL_DEBUG_UART2 > - add \rx, \rx, #0x00002000 @ UART 2 > - #endif > - #ifdef CONFIG_OMAP_LL_DEBUG_UART3 > - add \rx, \rx, #0x00fb0000 @ UART 3 > - add \rx, \rx, #0x00006000 > - #endif > - #endif > + orr \rx, \rx, #0x0006a000 @ uart1 on omap2/3/4 > + ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad > + > + /* Select the UART to use based on the UART1 scratchpad value */ > + cmp \rx, #0 @ no port configured? > + beq 21f @ if none, try to use UART1 > + cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1 > + beq 21f @ configure OMAP2/3/4UART1 > + cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2 > + beq 22f @ configure OMAP2/3/4UART2 > + cmp \rx, #OMAP2UART3 @ only on 24xx > + beq 23f @ configure OMAP2UART3 > + cmp \rx, #OMAP3UART3 @ only on 34xx > + beq 33f @ configure OMAP3UART3 > + cmp \rx, #OMAP4UART3 @ only on 44xx > + beq 43f @ configure OMAP4UART3 > + cmp \rx, #OMAP3UART4 @ only on 36xx > + beq 34f @ configure OMAP3UART4 > + cmp \rx, #OMAP4UART4 @ only on 44xx > + beq 44f @ configure OMAP4UART4 > + cmp \rx, #ZOOM_UART @ only on zoom2/3 > + beq 95f @ configure ZOOM_UART > + > + /* Configure the UART offset from the phys/virt base */ > + 21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 > + b 98f > + 22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 > + b 98f > + 23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE) > + b 98f > + 33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE) > + add \rx, \rx, #0x00fb0000 > + add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE > + b 98f > + 34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE) > + add \rx, \rx, #0x00fb0000 > + add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE > + b 98f > + 43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE) > + b 98f > + 44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE) > + b 98f > + 95: mov \rx, #ZOOM_UART_BASE > + ldr r1, =omap_uart_phys > + str \rx, [r1, #0] > + mov \rx, #ZOOM_UART_VIRT > + ldr r1, =omap_uart_virt > + str \rx, [r1, #0] > + mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT) > + ldr r1, =omap_uart_lsr > + str \rx, [r1, #0] > + b 10b > + > + /* Store both phys and virt address for the uart */ > + 98: add \rx, \rx, #0x48000000 @ phys base > + ldr r1, =omap_uart_phys > + str \rx, [r1, #0] > + sub \rx, \rx, #0x48000000 @ phys base > + add \rx, \rx, #0xfa000000 @ virt base > + ldr r1, =omap_uart_virt > + str \rx, [r1, #0] > + mov \rx, #(UART_LSR << OMAP_PORT_SHIFT) > + ldr r1, =omap_uart_lsr > + str \rx, [r1, #0] > + > + b 10b > + 99: > .endm > > .macro senduart,rd,rx -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/