Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754270Ab0BIMl4 (ORCPT ); Tue, 9 Feb 2010 07:41:56 -0500 Received: from e28smtp03.in.ibm.com ([122.248.162.3]:48952 "EHLO e28smtp03.in.ibm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754166Ab0BIMlw (ORCPT ); Tue, 9 Feb 2010 07:41:52 -0500 Message-ID: <4B715809.6000202@in.ibm.com> Date: Tue, 09 Feb 2010 18:11:45 +0530 From: Sachin Sant User-Agent: Thunderbird 2.0.0.22 (X11/20090609) MIME-Version: 1.0 To: linux-scsi CC: linux-next@vger.kernel.org, LKML , Eric.Moore@lsi.com Subject: [-next Feb 9] Boot failure on x86_64: mptbase fails to initialize References: <20100209190736.fe252102.sfr@canb.auug.org.au> In-Reply-To: <20100209190736.fe252102.sfr@canb.auug.org.au> Content-Type: multipart/mixed; boundary="------------040404030109070706020602" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24822 Lines: 505 This is a multi-part message in MIME format. --------------040404030109070706020602 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Today's next failed to boot on my 4 way x86_64 box because of mptbase driver initialization failure. Snippet of messages during boot : Fusion MPT SAS Host driver 3.04.14 mptsas 0000:03:04.0: can't find IRQ for PCI INT A; probably buggy MP table mptbase: ioc0: Initiating bringup ioc0: LSISAS1064 A3: Capabilities={Initiator} mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x1, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! Eventually machine fails to boot. I have similar problem on a x86 box but with IPS driver. So might not be a driver specific issue. I had similar problem with yesterday's next.IIRC the last successful boot was with next-20100203. Have attached the boot log from x86_64 box. Thanks -Sachin -- --------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India --------------------------------- --------------040404030109070706020602 Content-Type: text/plain; name="dmesg_next_0209" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg_next_0209" Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33-rc7-autotest-next-20100209 (root@mls21b) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP Tue Feb 9 15:56:08 IST 2010 Command line: root=/dev/disk/by-id/scsi-3500000e015c26a80-part1 console=tty0 console=ttyS1,19200 IDENT=1265712119 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c000 (usable) BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffa3900 (usable) BIOS-e820: 00000000cffa3900 - 00000000cffa7400 (ACPI data) BIOS-e820: 00000000cffa7400 - 00000000d0000000 (reserved) BIOS-e820: 00000000f4000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. No AGP bridge found last_pfn = 0x130000 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xcffa3 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff88000009c140] 9c140 init_memory_mapping: 0000000000000000-00000000cffa3000 init_memory_mapping: 0000000100000000-0000000130000000 RAMDISK: 37702000 - 37fefbdf ACPI: RSDP 00000000000fdfe0 00014 (v00 IBM ) ACPI: RSDT 00000000cffa7380 00038 (v01 IBM SERLEWIS 00001000 IBM 45444F43) ACPI: FACP 00000000cffa72c0 00084 (v02 IBM SERLEWIS 00001000 IBM 45444F43) ACPI: DSDT 00000000cffa3900 036CE (v01 IBM SERLEWIS 00001000 INTL 20060912) ACPI: FACS 00000000cffa7040 00040 ACPI: APIC 00000000cffa7200 00090 (v01 IBM SERLEWIS 00001000 IBM 45444F43) ACPI: SRAT 00000000cffa7100 000E8 (v01 AMD HAMMER 00000001 AMD 00000001) ACPI: HPET 00000000cffa70c0 00038 (v01 IBM SERLEWIS 00001000 IBM 45444F43) ACPI: MCFG 00000000cffa7080 0003C (v01 IBM SERLEWIS 00001000 IBM 45444F43) SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-d0000000 SRAT: Node 0 PXM 0 100000000-130000000 Bootmem setup node 0 0000000000000000-0000000130000000 NODE_DATA [000000000000f640 - 000000000002363f] bootmap [0000000000024000 - 0000000000049fff] pages 26 (14 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0005e8a494] TEXT DATA BSS ==> [0001000000 - 0005e8a494] #2 [0037702000 - 0037fefbdf] RAMDISK ==> [0037702000 - 0037fefbdf] #3 [0005e8b000 - 0005e8b2d0] BRK ==> [0005e8b000 - 0005e8b2d0] #4 [000009c000 - 000009c140] BIOS reserved ==> [000009c000 - 000009c140] #5 [000009c140 - 000009c150] MP-table mpf ==> [000009c140 - 000009c150] #6 [000009c150 - 000009dce0] BIOS reserved ==> [000009c150 - 000009dce0] #7 [000009de64 - 0000100000] BIOS reserved ==> [000009de64 - 0000100000] #8 [000009dce0 - 000009de64] MP-table mpc ==> [000009dce0 - 000009de64] #9 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #11 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #12 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] #13 [000000d000 - 000000f640] MEMNODEMAP ==> [000000d000 - 000000f640] Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x0000009c 0: 0x00000100 -> 0x000cffa3 0: 0x00100000 -> 0x00130000 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x488 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[16]) IOAPIC[1]: apic_id 13, version 17, address 0xfec02000, GSI 16-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x1166a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000cffa3000 - 00000000cffa4000 PM: Registered nosave memory: 00000000cffa4000 - 00000000cffa7000 PM: Registered nosave memory: 00000000cffa7000 - 00000000cffa8000 PM: Registered nosave memory: 00000000cffa8000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000f4000000 PM: Registered nosave memory: 00000000f4000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: d0000000:24000000) setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2 PERCPU: Embedded 28 pages/cpu @ffff880009c00000 s85544 r8192 d20952 u524288 pcpu-alloc: s85544 r8192 d20952 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031245 Policy zone: Normal Kernel command line: root=/dev/disk/by-id/scsi-3500000e015c26a80-part1 console=tty0 console=ttyS1,19200 IDENT=1265712119 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ f4000000 size 64 MB Node 1: aperture @ f4000000 size 64 MB Memory: 3977660k/4980736k available (3446k kernel code, 787208k absent, 215868k reserved, 4993k data, 952k init) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is enabled. NR_IRQS:4352 Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS1] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 2199.695 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.39 BogoMIPS (lpj=8798780) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100121 ------------[ cut here ]------------ WARNING: at arch/x86/mm/ioremap.c:111 __ioremap_caller+0x169/0x2f1() Hardware name: BladeCenter LS21 -[79716AA]- Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.33-rc7-autotest-next-20100209 #1 Call Trace: [] ? __ioremap_caller+0x169/0x2f1 [] warn_slowpath_common+0x77/0xa4 [] warn_slowpath_null+0xf/0x11 [] __ioremap_caller+0x169/0x2f1 [] ? acpi_os_map_memory+0x12/0x1b [] ioremap_nocache+0x12/0x14 [] acpi_os_map_memory+0x12/0x1b [] acpi_tb_verify_table+0x29/0x5b [] acpi_load_tables+0x39/0x15a [] acpi_early_init+0x60/0xf5 [] start_kernel+0x397/0x3a7 [] x86_64_start_reservations+0xa5/0xa9 [] x86_64_start_kernel+0xe1/0xe8 ---[ end trace 4eaa2a86a8e2da22 ]--- ioremap reserve_memtype failed -22 ACPI Exception: AE_NO_ACPI_TABLES, While loading namespace from ACPI tables (20100121/tbxface-604) ACPI: Unable to load the System Description Tables Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02 Booting Node 0, Processors #1 #2 #3 Ok. Brought up 4 CPUs Total of 4 processors activated (17600.10 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 TOM: 00000000d0000000 aka 3328M TOM2: 0000000130000000 aka 4864M PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter disabled. vgaarb: loaded PCI: Probing PCI hardware pci 0000:00:01.0: Enabling HT MSI Mapping pci 0000:00:01.0: PCI bridge to [bus 01-02] pci 0000:01:0d.0: PCI bridge to [bus 02-02] pci 0000:00:06.0: PCI bridge to [bus 03-03] pci 0000:00:07.0: PCI bridge to [bus 04-04] pci 0000:00:08.0: PCI bridge to [bus 05-05] pci 0000:00:09.0: PCI bridge to [bus 06-06] pci 0000:00:0a.0: PCI bridge to [bus 07-07] pci 0000:00:0b.0: PCI bridge to [bus 08-08] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI: disabled pci 0000:00:06.0: BAR 9: assigned [mem 0xd0000000-0xd00fffff pref] pci 0000:00:05.0: BAR 6: assigned [mem 0xd0100000-0xd011ffff pref] pci 0000:01:0d.0: PCI bridge to [bus 02-02] pci 0000:01:0d.0: bridge window [io disabled] pci 0000:01:0d.0: bridge window [mem 0xe2000000-0xe6ffffff] pci 0000:01:0d.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI bridge to [bus 01-02] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe7ffffff] pci 0000:00:01.0: bridge window [mem pref disabled] pci 0000:03:04.0: BAR 6: assigned [mem 0xd0000000-0xd00fffff pref] pci 0000:00:06.0: PCI bridge to [bus 03-03] pci 0000:00:06.0: bridge window [io 0x4000-0x4fff] pci 0000:00:06.0: bridge window [mem 0xdf000000-0xe00fffff] pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd00fffff pref] pci 0000:00:07.0: PCI bridge to [bus 04-04] pci 0000:00:07.0: bridge window [io disabled] pci 0000:00:07.0: bridge window [mem 0xdd000000-0xddffffff] pci 0000:00:07.0: bridge window [mem pref disabled] pci 0000:00:08.0: PCI bridge to [bus 05-05] pci 0000:00:08.0: bridge window [io disabled] pci 0000:00:08.0: bridge window [mem 0xdc000000-0xdcffffff] pci 0000:00:08.0: bridge window [mem pref disabled] pci 0000:00:09.0: PCI bridge to [bus 06-06] pci 0000:00:09.0: bridge window [io disabled] pci 0000:00:09.0: bridge window [mem 0xdb000000-0xdbffffff] pci 0000:00:09.0: bridge window [mem pref disabled] pci 0000:00:0a.0: PCI bridge to [bus 07-07] pci 0000:00:0a.0: bridge window [io disabled] pci 0000:00:0a.0: bridge window [mem 0xda000000-0xdaffffff] pci 0000:00:0a.0: bridge window [mem pref disabled] pci 0000:00:0b.0: PCI bridge to [bus 08-08] pci 0000:00:0b.0: bridge window [io disabled] pci 0000:00:0b.0: bridge window [mem 0xd9000000-0xd9ffffff] pci 0000:00:0b.0: bridge window [mem pref disabled] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: disabled boot interrupts on device [1166:0205] pci 0000:00:08.0: Found enabled HT MSI Mapping pci 0000:00:09.0: Found enabled HT MSI Mapping pci 0000:00:0a.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping Unpacking initramfs... Freeing initrd memory: 9142k freed PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ f4000000 size 65536 KB init_memory_mapping: 00000000f4000000-00000000f8000000 PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture platform rtc_cmos: registered platform RTC device (no PNP device found) audit: initializing netlink socket (disabled) type=2000 audit(1265712261.588:1): initialized rcu-torture:--- Start of test: nreaders=8 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7915 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered registered taskstats version 1 Freeing unused kernel memory: 952k freed Write protecting the kernel read-only data: 6144k Freeing unused kernel memory: 632k freed Freeing unused kernel memory: 244k freed doing fast boot SCSI subsystem initialized Fusion MPT base driver 3.04.14 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SAS Host driver 3.04.14 mptsas 0000:03:04.0: can't find IRQ for PCI INT A; probably buggy MP table mptbase: ioc0: Initiating bringup ioc0: LSISAS1064 A3: Capabilities={Initiator} mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x1, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x0, page 0x2, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x9, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery scsi0 : ioc0: LSISAS1064 A3, FwRev=000a0f00h, Ports=1, MaxQ=511, IRQ=9 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x12, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x11, page 0x0, action 0 FATAL: Error inserting thermal (/lib/modules/2.6BIOS EDD facility v0.16 2004-Jun-25, 1 devices found .33-rc7-autotestudevd version 128 started -next-20100209/kernel/drivers/acpi/thermal.ko): No such device usbcore: registered new interface driver usbfs FATAL: Error insusbcore: registered new interface driver hub erting fan (/libusbcore: registered new device driver usb /modules/2.6.33-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver rc7-autotest-nexehci_hcd 0000:00:03.2: can't find IRQ for PCI INT A; probably buggy MP table t-20100209/kerneehci_hcd 0000:00:03.2: EHCI Host Controller l/drivers/acpi/fehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 an.ko): No such device FATAL: Module jbd not foehci_hcd 0000:00:03.2: irq 5, io mem 0xf3ffd000 und. FATAL: Module ext3 not fouehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 nd. Creating deusb usb1: New USB device found, idVendor=1d6b, idProduct=0002 vice nodes with usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 udev usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33-rc7-autotest-next-20100209 ehci_hcd usb usb1: SerialNumber: 0000:00:03.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:03.0: can't find IRQ for PCI INT A; probably buggy MP table ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 5, io mem 0xf3fff000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33-rc7-autotest-next-20100209 ohci_hcd usb usb2: SerialNumber: 0000:00:03.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:03.1: can't find IRQ for PCI INT A; probably buggy MP table ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 5, io mem 0xf3ffe000 usb 1-4: new high speed USB device using ehci_hcd and address 2 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33-rc7-autotest-next-20100209 ohci_hcd usb usb3: SerialNumber: 0000:00:03.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected blogd: Warning: the ioctl TIOCGDEV is not known by the kernel Boot logging started on /dev/ttyS1(/dev/console) at Tue Feb 9 10:51:49 2010 Trying manual resume from /dev/disk/by-id/scsi-3500000e015c26a80-part2 resume device /dev/disk/by-id/scsi-3500000e015c26a80-part2 not found (ignoring) Trying manual resume from /dev/disk/by-id/scsi-3500000e015c26a80-part2 resume device /dev/disk/by-id/scsi-3500000e015c26a80-part2 not found (ignoring) Waiting for device /dev/disk/by-id/scsi-3500000e015c26a80-part1 to appear: ....ehci_hcd 0000:00:03.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ. ...........usb 1-4: device not accepting address 2, error -110 usb 1-4: new high speed USB device using ehci_hcd and address 3 .............mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery ..Could not find /dev/disk/by-id/scsi-3500000e015c26a80-part1. Want me to fall back to /dev/disk/by-id/scsi-3500000e015c26a80-part1? (Y/n) usb 1-4: device not accepting address 3, error -110 usb 1-4: new high speed USB device using ehci_hcd and address 4 usb 1-4: device not accepting address 4, error -110 usb 1-4: new high speed USB device using ehci_hcd and address 5 usb 1-4: device not accepting address 5, error -110 hub 1-0:1.0: unable to enumerate USB device on port 4 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x12, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x11, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x12, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x11, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x12, page 0x0, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0 mptbase: ioc0: WARNING - Issuing Reset from mpt_config!! mptbase: ioc0: Initiating recovery --------------040404030109070706020602-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/