Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 18 Apr 2002 19:04:23 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 18 Apr 2002 19:04:22 -0400 Received: from fencepost.gnu.org ([199.232.76.164]:29624 "EHLO fencepost.gnu.org") by vger.kernel.org with ESMTP id ; Thu, 18 Apr 2002 19:04:21 -0400 Date: Thu, 18 Apr 2002 19:04:20 -0400 (EDT) From: Pavel Roskin X-X-Sender: proski@marabou.research.att.com To: linux-kernel@vger.kernel.org Subject: COM1 became ttyS01 in 2.4.19-pre7 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello! The serial ports have changed their names after upgrading from 2.4.19-pre4 to 2.4.19-pre7. What used to be /dev/ttyS0 is /dev/ttyS1 now. This is from the kernel log: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS01 at 0x03f8 (irq = 4) is a 16550A ttyS02 at 0x02f8 (irq = 3) is a 16550A $ ls -l /dev/tts/ total 0 crw-rw-rw- 1 root root 4, 65 Apr 18 18:50 1 crw-rw-rw- 1 root root 4, 66 Dec 31 1969 2 I'm using AMD K7, SMP is disabled, serial ports are enabled, ACPI is disabled, APM is enabled, devfs is enabled and used, CONFIG_SERIAL_CONSOLE is enabled but not currently used. The motherboard is AOpen KT-133. The ports are set in BIOS to standard COM1 and COM2 settings. I'm ready to provide more information if needed. -- Regards, Pavel Roskin - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/