Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754000Ab0BWC6f (ORCPT ); Mon, 22 Feb 2010 21:58:35 -0500 Received: from mail.perches.com ([173.55.12.10]:1156 "EHLO mail.perches.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753515Ab0BWC5T (ORCPT ); Mon, 22 Feb 2010 21:57:19 -0500 From: Joe Perches To: David Miller Cc: netdev@vger.kernel.org, Jeff Kirsher , Jesse Brandeburg , Bruce Allan , Alex Duyck , PJ Waskiewicz , John Ronciak , e1000-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org Subject: [PATCH net-next 4/7] drivers/net/ixgb: Use pr_ and netdev_ Date: Mon, 22 Feb 2010 18:57:00 -0800 Message-Id: <2c1f79787b373df46715348d92b9c1fe76a03b7e.1266893507.git.joe@perches.com> X-Mailer: git-send-email 1.7.0.14.g7e948 In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23827 Lines: 744 Convert DEBUGOUTx to pr_debug Convert DEBUGFUNC to more commonly used ENTER Convert mac address output to %pM Use #define pr_fmt Convert a few printks to pr_ Improve ixgb_mc_addr_list_update: use a temporary for current mc address Use etherdevice.h functions for mac address testing Signed-off-by: Joe Perches --- drivers/net/ixgb/ixgb.h | 8 ++- drivers/net/ixgb/ixgb_ee.c | 14 ++-- drivers/net/ixgb/ixgb_hw.c | 147 +++++++++++++++++------------------------ drivers/net/ixgb/ixgb_hw.h | 12 ---- drivers/net/ixgb/ixgb_main.c | 33 ++++----- drivers/net/ixgb/ixgb_osdep.h | 16 +---- drivers/net/ixgb/ixgb_param.c | 31 ++++----- 7 files changed, 105 insertions(+), 156 deletions(-) diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index 92d2e71..521c0c7 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -78,9 +78,13 @@ struct ixgb_adapter; #define PFX "ixgb: " #ifdef _DEBUG_DRIVER_ -#define IXGB_DBG(args...) printk(KERN_DEBUG PFX args) +#define IXGB_DBG(fmt, args...) printk(KERN_DEBUG PFX fmt, ##args) #else -#define IXGB_DBG(args...) +#define IXGB_DBG(fmt, args...) \ +do { \ + if (0) \ + printk(KERN_DEBUG PFX fmt, ##args); \ +} while (0) #endif /* TX/RX descriptor defines */ diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c index 89ffa72..06303a3 100644 --- a/drivers/net/ixgb/ixgb_ee.c +++ b/drivers/net/ixgb/ixgb_ee.c @@ -26,6 +26,8 @@ *******************************************************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ixgb_hw.h" #include "ixgb_ee.h" /* Local prototypes */ @@ -467,11 +469,11 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw) u16 checksum = 0; struct ixgb_ee_map_type *ee_map; - DEBUGFUNC("ixgb_get_eeprom_data"); + ENTER(); ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - DEBUGOUT("ixgb_ee: Reading eeprom data\n"); + pr_debug("Reading eeprom data\n"); for (i = 0; i < IXGB_EEPROM_SIZE ; i++) { u16 ee_data; ee_data = ixgb_read_eeprom(hw, i); @@ -480,7 +482,7 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw) } if (checksum != (u16) EEPROM_SUM) { - DEBUGOUT("ixgb_ee: Checksum invalid.\n"); + pr_debug("Checksum invalid\n"); /* clear the init_ctrl_reg_1 to signify that the cache is * invalidated */ ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR); @@ -489,7 +491,7 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw) if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK)) != cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) { - DEBUGOUT("ixgb_ee: Signature invalid.\n"); + pr_debug("Signature invalid\n"); return(false); } @@ -555,13 +557,13 @@ ixgb_get_ee_mac_addr(struct ixgb_hw *hw, int i; struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - DEBUGFUNC("ixgb_get_ee_mac_addr"); + ENTER(); if (ixgb_check_and_get_eeprom_data(hw) == true) { for (i = 0; i < IXGB_ETH_LENGTH_OF_ADDRESS; i++) { mac_addr[i] = ee_map->mac_addr[i]; - DEBUGOUT2("mac(%d) = %.2X\n", i, mac_addr[i]); } + pr_debug("eeprom mac address = %pM\n", mac_addr); } } diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c index ff67a84..cd247b8 100644 --- a/drivers/net/ixgb/ixgb_hw.c +++ b/drivers/net/ixgb/ixgb_hw.c @@ -30,9 +30,13 @@ * Shared functions for accessing and configuring the adapter */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ixgb_hw.h" #include "ixgb_ids.h" +#include + /* Local function prototypes */ static u32 ixgb_hash_mc_addr(struct ixgb_hw *hw, u8 * mc_addr); @@ -120,13 +124,13 @@ ixgb_adapter_stop(struct ixgb_hw *hw) u32 ctrl_reg; u32 icr_reg; - DEBUGFUNC("ixgb_adapter_stop"); + ENTER(); /* If we are stopped or resetting exit gracefully and wait to be * started again before accessing the hardware. */ if (hw->adapter_stopped) { - DEBUGOUT("Exiting because the adapter is already stopped!!!\n"); + pr_debug("Exiting because the adapter is already stopped!!!\n"); return false; } @@ -136,7 +140,7 @@ ixgb_adapter_stop(struct ixgb_hw *hw) hw->adapter_stopped = true; /* Clear interrupt mask to stop board from generating interrupts */ - DEBUGOUT("Masking off all interrupts\n"); + pr_debug("Masking off all interrupts\n"); IXGB_WRITE_REG(hw, IMC, 0xFFFFFFFF); /* Disable the Transmit and Receive units. Then delay to allow @@ -152,12 +156,12 @@ ixgb_adapter_stop(struct ixgb_hw *hw) * the current PCI configuration. The global reset bit is self- * clearing, and should clear within a microsecond. */ - DEBUGOUT("Issuing a global reset to MAC\n"); + pr_debug("Issuing a global reset to MAC\n"); ctrl_reg = ixgb_mac_reset(hw); /* Clear interrupt mask to stop board from generating interrupts */ - DEBUGOUT("Masking off all interrupts\n"); + pr_debug("Masking off all interrupts\n"); IXGB_WRITE_REG(hw, IMC, 0xffffffff); /* Clear any pending interrupt events. */ @@ -183,7 +187,7 @@ ixgb_identify_xpak_vendor(struct ixgb_hw *hw) u16 vendor_name[5]; ixgb_xpak_vendor xpak_vendor; - DEBUGFUNC("ixgb_identify_xpak_vendor"); + ENTER(); /* Read the first few bytes of the vendor string from the XPAK NVR * registers. These are standard XENPAK/XPAK registers, so all XPAK @@ -222,12 +226,12 @@ ixgb_identify_phy(struct ixgb_hw *hw) ixgb_phy_type phy_type; ixgb_xpak_vendor xpak_vendor; - DEBUGFUNC("ixgb_identify_phy"); + ENTER(); /* Infer the transceiver/phy type from the device id */ switch (hw->device_id) { case IXGB_DEVICE_ID_82597EX: - DEBUGOUT("Identified TXN17401 optics\n"); + pr_debug("Identified TXN17401 optics\n"); phy_type = ixgb_phy_type_txn17401; break; @@ -237,30 +241,30 @@ ixgb_identify_phy(struct ixgb_hw *hw) * type of optics. */ xpak_vendor = ixgb_identify_xpak_vendor(hw); if (xpak_vendor == ixgb_xpak_vendor_intel) { - DEBUGOUT("Identified TXN17201 optics\n"); + pr_debug("Identified TXN17201 optics\n"); phy_type = ixgb_phy_type_txn17201; } else { - DEBUGOUT("Identified G6005 optics\n"); + pr_debug("Identified G6005 optics\n"); phy_type = ixgb_phy_type_g6005; } break; case IXGB_DEVICE_ID_82597EX_LR: - DEBUGOUT("Identified G6104 optics\n"); + pr_debug("Identified G6104 optics\n"); phy_type = ixgb_phy_type_g6104; break; case IXGB_DEVICE_ID_82597EX_CX4: - DEBUGOUT("Identified CX4\n"); + pr_debug("Identified CX4\n"); xpak_vendor = ixgb_identify_xpak_vendor(hw); if (xpak_vendor == ixgb_xpak_vendor_intel) { - DEBUGOUT("Identified TXN17201 optics\n"); + pr_debug("Identified TXN17201 optics\n"); phy_type = ixgb_phy_type_txn17201; } else { - DEBUGOUT("Identified G6005 optics\n"); + pr_debug("Identified G6005 optics\n"); phy_type = ixgb_phy_type_g6005; } break; default: - DEBUGOUT("Unknown physical layer module\n"); + pr_debug("Unknown physical layer module\n"); phy_type = ixgb_phy_type_unknown; break; } @@ -296,18 +300,18 @@ ixgb_init_hw(struct ixgb_hw *hw) u32 ctrl_reg; bool status; - DEBUGFUNC("ixgb_init_hw"); + ENTER(); /* Issue a global reset to the MAC. This will reset the chip's * transmit, receive, DMA, and link units. It will not effect * the current PCI configuration. The global reset bit is self- * clearing, and should clear within a microsecond. */ - DEBUGOUT("Issuing a global reset to MAC\n"); + pr_debug("Issuing a global reset to MAC\n"); ctrl_reg = ixgb_mac_reset(hw); - DEBUGOUT("Issuing an EE reset to MAC\n"); + pr_debug("Issuing an EE reset to MAC\n"); #ifdef HP_ZX1 /* Workaround for 82597EX reset errata */ IXGB_WRITE_REG_IO(hw, CTRL1, IXGB_CTRL1_EE_RST); @@ -335,7 +339,7 @@ ixgb_init_hw(struct ixgb_hw *hw) * If it is not valid, we fail hardware init. */ if (!mac_addr_valid(hw->curr_mac_addr)) { - DEBUGOUT("MAC address invalid after ixgb_init_rx_addrs\n"); + pr_debug("MAC address invalid after ixgb_init_rx_addrs\n"); return(false); } @@ -346,7 +350,7 @@ ixgb_init_hw(struct ixgb_hw *hw) ixgb_get_bus_info(hw); /* Zero out the Multicast HASH table */ - DEBUGOUT("Zeroing the MTA\n"); + pr_debug("Zeroing the MTA\n"); for (i = 0; i < IXGB_MC_TBL_SIZE; i++) IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0); @@ -379,7 +383,7 @@ ixgb_init_rx_addrs(struct ixgb_hw *hw) { u32 i; - DEBUGFUNC("ixgb_init_rx_addrs"); + ENTER(); /* * If the current mac address is valid, assume it is a software override @@ -391,28 +395,19 @@ ixgb_init_rx_addrs(struct ixgb_hw *hw) /* Get the MAC address from the eeprom for later reference */ ixgb_get_ee_mac_addr(hw, hw->curr_mac_addr); - DEBUGOUT3(" Keeping Permanent MAC Addr =%.2X %.2X %.2X ", - hw->curr_mac_addr[0], - hw->curr_mac_addr[1], hw->curr_mac_addr[2]); - DEBUGOUT3("%.2X %.2X %.2X\n", - hw->curr_mac_addr[3], - hw->curr_mac_addr[4], hw->curr_mac_addr[5]); + pr_debug("Keeping Permanent MAC Addr = %pM\n", + hw->curr_mac_addr); } else { /* Setup the receive address. */ - DEBUGOUT("Overriding MAC Address in RAR[0]\n"); - DEBUGOUT3(" New MAC Addr =%.2X %.2X %.2X ", - hw->curr_mac_addr[0], - hw->curr_mac_addr[1], hw->curr_mac_addr[2]); - DEBUGOUT3("%.2X %.2X %.2X\n", - hw->curr_mac_addr[3], - hw->curr_mac_addr[4], hw->curr_mac_addr[5]); + pr_debug("Overriding MAC Address in RAR[0]\n"); + pr_debug("New MAC Addr = %pM\n", hw->curr_mac_addr); ixgb_rar_set(hw, hw->curr_mac_addr, 0); } /* Zero out the other 15 receive addresses. */ - DEBUGOUT("Clearing RAR[1-15]\n"); + pr_debug("Clearing RAR[1-15]\n"); for (i = 1; i < IXGB_RAR_ENTRIES; i++) { /* Write high reg first to disable the AV bit first */ IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); @@ -444,64 +439,50 @@ ixgb_mc_addr_list_update(struct ixgb_hw *hw, u32 hash_value; u32 i; u32 rar_used_count = 1; /* RAR[0] is used for our MAC address */ + u8 *mca; - DEBUGFUNC("ixgb_mc_addr_list_update"); + ENTER(); /* Set the new number of MC addresses that we are being requested to use. */ hw->num_mc_addrs = mc_addr_count; /* Clear RAR[1-15] */ - DEBUGOUT(" Clearing RAR[1-15]\n"); + pr_debug("Clearing RAR[1-15]\n"); for (i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) { IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); } /* Clear the MTA */ - DEBUGOUT(" Clearing MTA\n"); + pr_debug("Clearing MTA\n"); for (i = 0; i < IXGB_MC_TBL_SIZE; i++) IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0); /* Add the new addresses */ + mca = mc_addr_list; for (i = 0; i < mc_addr_count; i++) { - DEBUGOUT(" Adding the multicast addresses:\n"); - DEBUGOUT7(" MC Addr #%d =%.2X %.2X %.2X %.2X %.2X %.2X\n", i, - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad)], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + - 1], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + - 2], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + - 3], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + - 4], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + - 5]); + pr_debug("Adding the multicast addresses:\n"); + pr_debug("MC Addr #%d = %pM\n", i, mca); /* Place this multicast address in the RAR if there is room, * * else put it in the MTA */ if (rar_used_count < IXGB_RAR_ENTRIES) { - ixgb_rar_set(hw, - mc_addr_list + - (i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad)), - rar_used_count); - DEBUGOUT1("Added a multicast address to RAR[%d]\n", i); + ixgb_rar_set(hw, mca, rar_used_count); + pr_debug("Added a multicast address to RAR[%d]\n", i); rar_used_count++; } else { - hash_value = ixgb_hash_mc_addr(hw, - mc_addr_list + - (i * - (IXGB_ETH_LENGTH_OF_ADDRESS - + pad))); + hash_value = ixgb_hash_mc_addr(hw, mca); - DEBUGOUT1(" Hash value = 0x%03X\n", hash_value); + pr_debug("Hash value = 0x%03X\n", hash_value); ixgb_mta_set(hw, hash_value); } + + mca += IXGB_ETH_LENGTH_OF_ADDRESS + pad; } - DEBUGOUT("MC Update Complete\n"); + pr_debug("MC Update Complete\n"); return; } @@ -520,7 +501,7 @@ ixgb_hash_mc_addr(struct ixgb_hw *hw, { u32 hash_value = 0; - DEBUGFUNC("ixgb_hash_mc_addr"); + ENTER(); /* The portion of the address that is used for the hash table is * determined by the mc_filter_type setting. @@ -547,7 +528,7 @@ ixgb_hash_mc_addr(struct ixgb_hw *hw, break; default: /* Invalid mc_filter_type, what should we do? */ - DEBUGOUT("MC filter type param set incorrectly\n"); + pr_debug("MC filter type param set incorrectly\n"); ASSERT(0); break; } @@ -603,7 +584,7 @@ ixgb_rar_set(struct ixgb_hw *hw, { u32 rar_low, rar_high; - DEBUGFUNC("ixgb_rar_set"); + ENTER(); /* HW expects these in little endian so we reverse the byte order * from network order (big endian) to little endian @@ -666,7 +647,7 @@ ixgb_setup_fc(struct ixgb_hw *hw) u32 pap_reg = 0; /* by default, assume no pause time */ bool status = true; - DEBUGFUNC("ixgb_setup_fc"); + ENTER(); /* Get the current control reg 0 settings */ ctrl_reg = IXGB_READ_REG(hw, CTRL0); @@ -710,7 +691,7 @@ ixgb_setup_fc(struct ixgb_hw *hw) break; default: /* We should never get here. The value should be 0-3. */ - DEBUGOUT("Flow control param set incorrectly\n"); + pr_debug("Flow control param set incorrectly\n"); ASSERT(0); break; } @@ -940,7 +921,7 @@ ixgb_check_for_link(struct ixgb_hw *hw) u32 status_reg; u32 xpcss_reg; - DEBUGFUNC("ixgb_check_for_link"); + ENTER(); xpcss_reg = IXGB_READ_REG(hw, XPCSS); status_reg = IXGB_READ_REG(hw, STATUS); @@ -950,7 +931,7 @@ ixgb_check_for_link(struct ixgb_hw *hw) hw->link_up = true; } else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) && (status_reg & IXGB_STATUS_LU)) { - DEBUGOUT("XPCSS Not Aligned while Status:LU is set.\n"); + pr_debug("XPCSS Not Aligned while Status:LU is set\n"); hw->link_up = ixgb_link_reset(hw); } else { /* @@ -981,8 +962,7 @@ bool ixgb_check_for_bad_link(struct ixgb_hw *hw) newRFC = IXGB_READ_REG(hw, RFC); if ((hw->lastLFC + 250 < newLFC) || (hw->lastRFC + 250 < newRFC)) { - DEBUGOUT - ("BAD LINK! too many LFC/RFC since last check\n"); + pr_debug("BAD LINK! too many LFC/RFC since last check\n"); bad_link_returncode = true; } hw->lastLFC = newLFC; @@ -1002,11 +982,11 @@ ixgb_clear_hw_cntrs(struct ixgb_hw *hw) { volatile u32 temp_reg; - DEBUGFUNC("ixgb_clear_hw_cntrs"); + ENTER(); /* if we are stopped or resetting exit gracefully */ if (hw->adapter_stopped) { - DEBUGOUT("Exiting because the adapter is stopped!!!\n"); + pr_debug("Exiting because the adapter is stopped!!!\n"); return; } @@ -1156,26 +1136,21 @@ static bool mac_addr_valid(u8 *mac_addr) { bool is_valid = true; - DEBUGFUNC("mac_addr_valid"); + ENTER(); /* Make sure it is not a multicast address */ - if (IS_MULTICAST(mac_addr)) { - DEBUGOUT("MAC address is multicast\n"); + if (is_multicast_ether_addr(mac_addr)) { + pr_debug("MAC address is multicast\n"); is_valid = false; } /* Not a broadcast address */ - else if (IS_BROADCAST(mac_addr)) { - DEBUGOUT("MAC address is broadcast\n"); + else if (is_broadcast_ether_addr(mac_addr)) { + pr_debug("MAC address is broadcast\n"); is_valid = false; } /* Reject the zero address */ - else if (mac_addr[0] == 0 && - mac_addr[1] == 0 && - mac_addr[2] == 0 && - mac_addr[3] == 0 && - mac_addr[4] == 0 && - mac_addr[5] == 0) { - DEBUGOUT("MAC address is all zeros\n"); + else if (is_zero_ether_addr(mac_addr)) { + pr_debug("MAC address is all zeros\n"); is_valid = false; } return (is_valid); diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ixgb/ixgb_hw.h index af6ca3a..873d32b 100644 --- a/drivers/net/ixgb/ixgb_hw.h +++ b/drivers/net/ixgb/ixgb_hw.h @@ -636,18 +636,6 @@ struct ixgb_flash_buffer { u8 filler3[0xAAAA]; }; -/* - * This is a little-endian specific check. - */ -#define IS_MULTICAST(Address) \ - (bool)(((u8 *)(Address))[0] & ((u8)0x01)) - -/* - * Check whether an address is broadcast. - */ -#define IS_BROADCAST(Address) \ - ((((u8 *)(Address))[0] == ((u8)0xff)) && (((u8 *)(Address))[1] == ((u8)0xff))) - /* Flow control parameters */ struct ixgb_fc { u32 high_water; /* Flow Control High-water */ diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 93d0185..cfcc0b2 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -26,6 +26,8 @@ *******************************************************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ixgb.h" char ixgb_driver_name[] = "ixgb"; @@ -146,10 +148,8 @@ MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); static int __init ixgb_init_module(void) { - printk(KERN_INFO "%s - version %s\n", - ixgb_driver_string, ixgb_driver_version); - - printk(KERN_INFO "%s\n", ixgb_copyright); + pr_info("%s - version %s\n", ixgb_driver_string, ixgb_driver_version); + pr_info("%s\n", ixgb_copyright); return pci_register_driver(&ixgb_driver); } @@ -374,8 +374,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } else { if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) || (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) { - printk(KERN_ERR - "ixgb: No usable DMA configuration, aborting\n"); + pr_err("No usable DMA configuration, aborting\n"); goto err_dma_mask; } pci_using_dac = 0; @@ -1119,15 +1118,14 @@ ixgb_watchdog(unsigned long data) if (adapter->hw.link_up) { if (!netif_carrier_ok(netdev)) { - printk(KERN_INFO "ixgb: %s NIC Link is Up 10 Gbps " - "Full Duplex, Flow Control: %s\n", - netdev->name, - (adapter->hw.fc.type == ixgb_fc_full) ? - "RX/TX" : - ((adapter->hw.fc.type == ixgb_fc_rx_pause) ? - "RX" : - ((adapter->hw.fc.type == ixgb_fc_tx_pause) ? - "TX" : "None"))); + netdev_info(netdev, + "NIC Link is Up 10 Gbps Full Duplex, Flow Control: %s\n", + (adapter->hw.fc.type == ixgb_fc_full) ? + "RX/TX" : + (adapter->hw.fc.type == ixgb_fc_rx_pause) ? + "RX" : + (adapter->hw.fc.type == ixgb_fc_tx_pause) ? + "TX" : "None"); adapter->link_speed = 10000; adapter->link_duplex = FULL_DUPLEX; netif_carrier_on(netdev); @@ -1136,8 +1134,7 @@ ixgb_watchdog(unsigned long data) if (netif_carrier_ok(netdev)) { adapter->link_speed = 0; adapter->link_duplex = 0; - printk(KERN_INFO "ixgb: %s NIC Link is Down\n", - netdev->name); + netdev_info(netdev, "NIC Link is Down\n"); netif_carrier_off(netdev); } } @@ -2323,7 +2320,7 @@ static void ixgb_io_resume(struct pci_dev *pdev) if (netif_running(netdev)) { if (ixgb_up(adapter)) { - printk ("ixgb: can't bring device back up after reset\n"); + pr_err("can't bring device back up after reset\n"); return; } } diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h index 371a6be..e361185 100644 --- a/drivers/net/ixgb/ixgb_osdep.h +++ b/drivers/net/ixgb/ixgb_osdep.h @@ -41,20 +41,8 @@ #undef ASSERT #define ASSERT(x) BUG_ON(!(x)) -#define MSGOUT(S, A, B) printk(KERN_DEBUG S "\n", A, B) - -#ifdef DBG -#define DEBUGOUT(S) printk(KERN_DEBUG S "\n") -#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A) -#else -#define DEBUGOUT(S) -#define DEBUGOUT1(S, A...) -#endif - -#define DEBUGFUNC(F) DEBUGOUT(F) -#define DEBUGOUT2 DEBUGOUT1 -#define DEBUGOUT3 DEBUGOUT2 -#define DEBUGOUT7 DEBUGOUT3 + +#define ENTER() pr_debug("%s\n", __func__); #define IXGB_WRITE_REG(a, reg, value) ( \ writel((value), ((a)->hw_addr + IXGB_##reg))) diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c index af35e1d..88a08f0 100644 --- a/drivers/net/ixgb/ixgb_param.c +++ b/drivers/net/ixgb/ixgb_param.c @@ -26,6 +26,8 @@ *******************************************************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ixgb.h" /* This is the only thing that needs to be changed to adjust the @@ -209,16 +211,16 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt) case enable_option: switch (*value) { case OPTION_ENABLED: - printk(KERN_INFO "%s Enabled\n", opt->name); + pr_info("%s Enabled\n", opt->name); return 0; case OPTION_DISABLED: - printk(KERN_INFO "%s Disabled\n", opt->name); + pr_info("%s Disabled\n", opt->name); return 0; } break; case range_option: if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - printk(KERN_INFO "%s set to %i\n", opt->name, *value); + pr_info("%s set to %i\n", opt->name, *value); return 0; } break; @@ -230,7 +232,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt) ent = &opt->arg.l.p[i]; if (*value == ent->i) { if (ent->str[0] != '\0') - printk(KERN_INFO "%s\n", ent->str); + pr_info("%s\n", ent->str); return 0; } } @@ -240,8 +242,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt) BUG(); } - printk(KERN_INFO "Invalid %s specified (%i) %s\n", - opt->name, *value, opt->err); + pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err); *value = opt->def; return -1; } @@ -261,9 +262,8 @@ ixgb_check_options(struct ixgb_adapter *adapter) { int bd = adapter->bd_number; if (bd >= IXGB_MAX_NIC) { - printk(KERN_NOTICE - "Warning: no configuration for board #%i\n", bd); - printk(KERN_NOTICE "Using defaults for all values\n"); + pr_notice("Warning: no configuration for board #%i\n", bd); + pr_notice("Using defaults for all values\n"); } { /* Transmit Descriptor Count */ @@ -363,8 +363,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) adapter->hw.fc.high_water = opt.def; } if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) - printk(KERN_INFO - "Ignoring RxFCHighThresh when no RxFC\n"); + pr_info("Ignoring RxFCHighThresh when no RxFC\n"); } { /* Receive Flow Control Low Threshold */ const struct ixgb_option opt = { @@ -383,8 +382,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) adapter->hw.fc.low_water = opt.def; } if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) - printk(KERN_INFO - "Ignoring RxFCLowThresh when no RxFC\n"); + pr_info("Ignoring RxFCLowThresh when no RxFC\n"); } { /* Flow Control Pause Time Request*/ const struct ixgb_option opt = { @@ -404,17 +402,14 @@ ixgb_check_options(struct ixgb_adapter *adapter) adapter->hw.fc.pause_time = opt.def; } if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) - printk(KERN_INFO - "Ignoring FCReqTimeout when no RxFC\n"); + pr_info("Ignoring FCReqTimeout when no RxFC\n"); } /* high low and spacing check for rx flow control thresholds */ if (adapter->hw.fc.type & ixgb_fc_tx_pause) { /* high must be greater than low */ if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) { /* set defaults */ - printk(KERN_INFO - "RxFCHighThresh must be >= (RxFCLowThresh + 8), " - "Using Defaults\n"); + pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n"); adapter->hw.fc.high_water = DEFAULT_FCRTH; adapter->hw.fc.low_water = DEFAULT_FCRTL; } -- 1.7.0.14.g7e948 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/