Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932561Ab0BYNbL (ORCPT ); Thu, 25 Feb 2010 08:31:11 -0500 Received: from mx1.redhat.com ([209.132.183.28]:63626 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932507Ab0BYNbH (ORCPT ); Thu, 25 Feb 2010 08:31:07 -0500 From: Masami Hiramatsu Subject: [PATCH -tip v3&10 08/18] kprobes/x86: Support kprobes jump optimization on x86 To: Ingo Molnar , Frederic Weisbecker , Ananth N Mavinakayanahalli , lkml Cc: systemtap , DLE , Masami Hiramatsu , Ananth N Mavinakayanahalli , Ingo Molnar , Jim Keniston , Srikar Dronamraju , Christoph Hellwig , Steven Rostedt , Frederic Weisbecker , "H. Peter Anvin" , Anders Kaseorg , Tim Abbott , Andi Kleen , Jason Baron , Mathieu Desnoyers Date: Thu, 25 Feb 2010 08:34:46 -0500 Message-ID: <20100225133446.6725.78994.stgit@localhost6.localdomain6> In-Reply-To: <20100225133342.6725.26971.stgit@localhost6.localdomain6> References: <20100225133342.6725.26971.stgit@localhost6.localdomain6> User-Agent: StGIT/0.14.3 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19817 Lines: 653 Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Ingo Molnar Cc: Jim Keniston Cc: Srikar Dronamraju Cc: Christoph Hellwig Cc: Steven Rostedt Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Anders Kaseorg Cc: Tim Abbott Cc: Andi Kleen Cc: Jason Baron Cc: Mathieu Desnoyers --- arch/x86/Kconfig | 1 arch/x86/include/asm/kprobes.h | 29 +++ arch/x86/kernel/kprobes.c | 433 ++++++++++++++++++++++++++++++++++++++-- 3 files changed, 441 insertions(+), 22 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d708497..6de8f35 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -31,6 +31,7 @@ config X86 select ARCH_WANT_FRAME_POINTERS select HAVE_DMA_ATTRS select HAVE_KRETPROBES + select HAVE_OPTPROBES select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h index eaec8ea..4ffa345 100644 --- a/arch/x86/include/asm/kprobes.h +++ b/arch/x86/include/asm/kprobes.h @@ -33,6 +33,9 @@ struct kprobe; typedef u8 kprobe_opcode_t; #define BREAKPOINT_INSTRUCTION 0xcc #define RELATIVEJUMP_OPCODE 0xe9 +#define RELATIVEJUMP_SIZE 5 +#define RELATIVECALL_OPCODE 0xe8 +#define RELATIVE_ADDR_SIZE 4 #define MAX_INSN_SIZE 16 #define MAX_STACK_SIZE 64 #define MIN_STACK_SIZE(ADDR) \ @@ -44,6 +47,17 @@ typedef u8 kprobe_opcode_t; #define flush_insn_slot(p) do { } while (0) +/* optinsn template addresses */ +extern kprobe_opcode_t optprobe_template_entry; +extern kprobe_opcode_t optprobe_template_val; +extern kprobe_opcode_t optprobe_template_call; +extern kprobe_opcode_t optprobe_template_end; +#define MAX_OPTIMIZED_LENGTH (MAX_INSN_SIZE + RELATIVE_ADDR_SIZE) +#define MAX_OPTINSN_SIZE \ + (((unsigned long)&optprobe_template_end - \ + (unsigned long)&optprobe_template_entry) + \ + MAX_OPTIMIZED_LENGTH + RELATIVEJUMP_SIZE) + extern const int kretprobe_blacklist_size; void arch_remove_kprobe(struct kprobe *p); @@ -64,6 +78,21 @@ struct arch_specific_insn { int boostable; }; +struct arch_optimized_insn { + /* copy of the original instructions */ + kprobe_opcode_t copied_insn[RELATIVE_ADDR_SIZE]; + /* detour code buffer */ + kprobe_opcode_t *insn; + /* the size of instructions copied to detour code buffer */ + size_t size; +}; + +/* Return true (!0) if optinsn is prepared for optimization. */ +static inline int arch_prepared_optinsn(struct arch_optimized_insn *optinsn) +{ + return optinsn->size; +} + struct prev_kprobe { struct kprobe *kp; unsigned long status; diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index 4ae95be..b43bbae 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include @@ -106,16 +107,22 @@ struct kretprobe_blackpoint kretprobe_blacklist[] = { }; const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist); -/* Insert a jump instruction at address 'from', which jumps to address 'to'.*/ -static void __kprobes set_jmp_op(void *from, void *to) +static void __kprobes __synthesize_relative_insn(void *from, void *to, u8 op) { - struct __arch_jmp_op { - char op; + struct __arch_relative_insn { + u8 op; s32 raddr; - } __attribute__((packed)) * jop; - jop = (struct __arch_jmp_op *)from; - jop->raddr = (s32)((long)(to) - ((long)(from) + 5)); - jop->op = RELATIVEJUMP_OPCODE; + } __attribute__((packed)) *insn; + + insn = (struct __arch_relative_insn *)from; + insn->raddr = (s32)((long)(to) - ((long)(from) + 5)); + insn->op = op; +} + +/* Insert a jump instruction at address 'from', which jumps to address 'to'.*/ +static void __kprobes synthesize_reljump(void *from, void *to) +{ + __synthesize_relative_insn(from, to, RELATIVEJUMP_OPCODE); } /* @@ -202,7 +209,7 @@ static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr) /* * Basically, kp->ainsn.insn has an original instruction. * However, RIP-relative instruction can not do single-stepping - * at different place, fix_riprel() tweaks the displacement of + * at different place, __copy_instruction() tweaks the displacement of * that instruction. In that case, we can't recover the instruction * from the kp->ainsn.insn. * @@ -284,21 +291,37 @@ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn) } /* - * Adjust the displacement if the instruction uses the %rip-relative - * addressing mode. + * Copy an instruction and adjust the displacement if the instruction + * uses the %rip-relative addressing mode. * If it does, Return the address of the 32-bit displacement word. * If not, return null. * Only applicable to 64-bit x86. */ -static void __kprobes fix_riprel(struct kprobe *p) +static int __kprobes __copy_instruction(u8 *dest, u8 *src, int recover) { -#ifdef CONFIG_X86_64 struct insn insn; - kernel_insn_init(&insn, p->ainsn.insn); + int ret; + kprobe_opcode_t buf[MAX_INSN_SIZE]; + kernel_insn_init(&insn, src); + if (recover) { + insn_get_opcode(&insn); + if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) { + ret = recover_probed_instruction(buf, + (unsigned long)src); + if (ret) + return 0; + kernel_insn_init(&insn, buf); + } + } + insn_get_length(&insn); + memcpy(dest, insn.kaddr, insn.length); + +#ifdef CONFIG_X86_64 if (insn_rip_relative(&insn)) { s64 newdisp; u8 *disp; + kernel_insn_init(&insn, dest); insn_get_displacement(&insn); /* * The copied instruction uses the %rip-relative addressing @@ -312,20 +335,23 @@ static void __kprobes fix_riprel(struct kprobe *p) * extension of the original signed 32-bit displacement would * have given. */ - newdisp = (u8 *) p->addr + (s64) insn.displacement.value - - (u8 *) p->ainsn.insn; + newdisp = (u8 *) src + (s64) insn.displacement.value - + (u8 *) dest; BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check. */ - disp = (u8 *) p->ainsn.insn + insn_offset_displacement(&insn); + disp = (u8 *) dest + insn_offset_displacement(&insn); *(s32 *) disp = (s32) newdisp; } #endif + return insn.length; } static void __kprobes arch_copy_kprobe(struct kprobe *p) { - memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); - - fix_riprel(p); + /* + * Copy an instruction without recovering int3, because it will be + * put by another subsystem. + */ + __copy_instruction(p->ainsn.insn, p->addr, 0); if (can_boost(p->addr)) p->ainsn.boostable = 0; @@ -417,9 +443,20 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, *sara = (unsigned long) &kretprobe_trampoline; } +#ifdef CONFIG_OPTPROBES +static int __kprobes setup_detour_execution(struct kprobe *p, + struct pt_regs *regs, + int reenter); +#else +#define setup_detour_execution(p, regs, reenter) (0) +#endif + static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb, int reenter) { + if (setup_detour_execution(p, regs, reenter)) + return; + #if !defined(CONFIG_PREEMPT) if (p->ainsn.boostable == 1 && !p->post_handler) { /* Boost up -- we can execute copied instructions directly */ @@ -815,8 +852,8 @@ static void __kprobes resume_execution(struct kprobe *p, * These instructions can be executed directly if it * jumps back to correct address. */ - set_jmp_op((void *)regs->ip, - (void *)orig_ip + (regs->ip - copy_ip)); + synthesize_reljump((void *)regs->ip, + (void *)orig_ip + (regs->ip - copy_ip)); p->ainsn.boostable = 1; } else { p->ainsn.boostable = -1; @@ -1043,6 +1080,358 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) return 0; } + +#ifdef CONFIG_OPTPROBES + +/* Insert a call instruction at address 'from', which calls address 'to'.*/ +static void __kprobes synthesize_relcall(void *from, void *to) +{ + __synthesize_relative_insn(from, to, RELATIVECALL_OPCODE); +} + +/* Insert a move instruction which sets a pointer to eax/rdi (1st arg). */ +static void __kprobes synthesize_set_arg1(kprobe_opcode_t *addr, + unsigned long val) +{ +#ifdef CONFIG_X86_64 + *addr++ = 0x48; + *addr++ = 0xbf; +#else + *addr++ = 0xb8; +#endif + *(unsigned long *)addr = val; +} + +void __kprobes kprobes_optinsn_template_holder(void) +{ + asm volatile ( + ".global optprobe_template_entry\n" + "optprobe_template_entry: \n" +#ifdef CONFIG_X86_64 + /* We don't bother saving the ss register */ + " pushq %rsp\n" + " pushfq\n" + SAVE_REGS_STRING + " movq %rsp, %rsi\n" + ".global optprobe_template_val\n" + "optprobe_template_val: \n" + ASM_NOP5 + ASM_NOP5 + ".global optprobe_template_call\n" + "optprobe_template_call: \n" + ASM_NOP5 + /* Move flags to rsp */ + " movq 144(%rsp), %rdx\n" + " movq %rdx, 152(%rsp)\n" + RESTORE_REGS_STRING + /* Skip flags entry */ + " addq $8, %rsp\n" + " popfq\n" +#else /* CONFIG_X86_32 */ + " pushf\n" + SAVE_REGS_STRING + " movl %esp, %edx\n" + ".global optprobe_template_val\n" + "optprobe_template_val: \n" + ASM_NOP5 + ".global optprobe_template_call\n" + "optprobe_template_call: \n" + ASM_NOP5 + RESTORE_REGS_STRING + " addl $4, %esp\n" /* skip cs */ + " popf\n" +#endif + ".global optprobe_template_end\n" + "optprobe_template_end: \n"); +} + +#define TMPL_MOVE_IDX \ + ((long)&optprobe_template_val - (long)&optprobe_template_entry) +#define TMPL_CALL_IDX \ + ((long)&optprobe_template_call - (long)&optprobe_template_entry) +#define TMPL_END_IDX \ + ((long)&optprobe_template_end - (long)&optprobe_template_entry) + +#define INT3_SIZE sizeof(kprobe_opcode_t) + +/* Optimized kprobe call back function: called from optinsn */ +static void __kprobes optimized_callback(struct optimized_kprobe *op, + struct pt_regs *regs) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + preempt_disable(); + if (kprobe_running()) { + kprobes_inc_nmissed_count(&op->kp); + } else { + /* Save skipped registers */ +#ifdef CONFIG_X86_64 + regs->cs = __KERNEL_CS; +#else + regs->cs = __KERNEL_CS | get_kernel_rpl(); + regs->gs = 0; +#endif + regs->ip = (unsigned long)op->kp.addr + INT3_SIZE; + regs->orig_ax = ~0UL; + + __get_cpu_var(current_kprobe) = &op->kp; + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + opt_pre_handler(&op->kp, regs); + __get_cpu_var(current_kprobe) = NULL; + } + preempt_enable_no_resched(); +} + +static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src) +{ + int len = 0, ret; + + while (len < RELATIVEJUMP_SIZE) { + ret = __copy_instruction(dest + len, src + len, 1); + if (!ret || !can_boost(dest + len)) + return -EINVAL; + len += ret; + } + /* Check whether the address range is reserved */ + if (ftrace_text_reserved(src, src + len - 1) || + alternatives_text_reserved(src, src + len - 1)) + return -EBUSY; + + return len; +} + +/* Check whether insn is indirect jump */ +static int __kprobes insn_is_indirect_jump(struct insn *insn) +{ + return ((insn->opcode.bytes[0] == 0xff && + (X86_MODRM_REG(insn->modrm.value) & 6) == 4) || /* Jump */ + insn->opcode.bytes[0] == 0xea); /* Segment based jump */ +} + +/* Check whether insn jumps into specified address range */ +static int insn_jump_into_range(struct insn *insn, unsigned long start, int len) +{ + unsigned long target = 0; + + switch (insn->opcode.bytes[0]) { + case 0xe0: /* loopne */ + case 0xe1: /* loope */ + case 0xe2: /* loop */ + case 0xe3: /* jcxz */ + case 0xe9: /* near relative jump */ + case 0xeb: /* short relative jump */ + break; + case 0x0f: + if ((insn->opcode.bytes[1] & 0xf0) == 0x80) /* jcc near */ + break; + return 0; + default: + if ((insn->opcode.bytes[0] & 0xf0) == 0x70) /* jcc short */ + break; + return 0; + } + target = (unsigned long)insn->next_byte + insn->immediate.value; + + return (start <= target && target <= start + len); +} + +/* Decode whole function to ensure any instructions don't jump into target */ +static int __kprobes can_optimize(unsigned long paddr) +{ + int ret; + unsigned long addr, size = 0, offset = 0; + struct insn insn; + kprobe_opcode_t buf[MAX_INSN_SIZE]; + /* Dummy buffers for lookup_symbol_attrs */ + static char __dummy_buf[KSYM_NAME_LEN]; + + /* Lookup symbol including addr */ + if (!kallsyms_lookup(paddr, &size, &offset, NULL, __dummy_buf)) + return 0; + + /* Check there is enough space for a relative jump. */ + if (size - offset < RELATIVEJUMP_SIZE) + return 0; + + /* Decode instructions */ + addr = paddr - offset; + while (addr < paddr - offset + size) { /* Decode until function end */ + if (search_exception_tables(addr)) + /* + * Since some fixup code will jumps into this function, + * we can't optimize kprobe in this function. + */ + return 0; + kernel_insn_init(&insn, (void *)addr); + insn_get_opcode(&insn); + if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) { + ret = recover_probed_instruction(buf, addr); + if (ret) + return 0; + kernel_insn_init(&insn, buf); + } + insn_get_length(&insn); + /* Recover address */ + insn.kaddr = (void *)addr; + insn.next_byte = (void *)(addr + insn.length); + /* Check any instructions don't jump into target */ + if (insn_is_indirect_jump(&insn) || + insn_jump_into_range(&insn, paddr + INT3_SIZE, + RELATIVE_ADDR_SIZE)) + return 0; + addr += insn.length; + } + + return 1; +} + +/* Check optimized_kprobe can actually be optimized. */ +int __kprobes arch_check_optimized_kprobe(struct optimized_kprobe *op) +{ + int i; + struct kprobe *p; + + for (i = 1; i < op->optinsn.size; i++) { + p = get_kprobe(op->kp.addr + i); + if (p && !kprobe_disabled(p)) + return -EEXIST; + } + + return 0; +} + +/* Check the addr is within the optimized instructions. */ +int __kprobes arch_within_optimized_kprobe(struct optimized_kprobe *op, + unsigned long addr) +{ + return ((unsigned long)op->kp.addr <= addr && + (unsigned long)op->kp.addr + op->optinsn.size > addr); +} + +/* Free optimized instruction slot */ +static __kprobes +void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty) +{ + if (op->optinsn.insn) { + free_optinsn_slot(op->optinsn.insn, dirty); + op->optinsn.insn = NULL; + op->optinsn.size = 0; + } +} + +void __kprobes arch_remove_optimized_kprobe(struct optimized_kprobe *op) +{ + __arch_remove_optimized_kprobe(op, 1); +} + +/* + * Copy replacing target instructions + * Target instructions MUST be relocatable (checked inside) + */ +int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op) +{ + u8 *buf; + int ret; + long rel; + + if (!can_optimize((unsigned long)op->kp.addr)) + return -EILSEQ; + + op->optinsn.insn = get_optinsn_slot(); + if (!op->optinsn.insn) + return -ENOMEM; + + /* + * Verify if the address gap is in 2GB range, because this uses + * a relative jump. + */ + rel = (long)op->optinsn.insn - (long)op->kp.addr + RELATIVEJUMP_SIZE; + if (abs(rel) > 0x7fffffff) + return -ERANGE; + + buf = (u8 *)op->optinsn.insn; + + /* Copy instructions into the out-of-line buffer */ + ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr); + if (ret < 0) { + __arch_remove_optimized_kprobe(op, 0); + return ret; + } + op->optinsn.size = ret; + + /* Copy arch-dep-instance from template */ + memcpy(buf, &optprobe_template_entry, TMPL_END_IDX); + + /* Set probe information */ + synthesize_set_arg1(buf + TMPL_MOVE_IDX, (unsigned long)op); + + /* Set probe function call */ + synthesize_relcall(buf + TMPL_CALL_IDX, optimized_callback); + + /* Set returning jmp instruction at the tail of out-of-line buffer */ + synthesize_reljump(buf + TMPL_END_IDX + op->optinsn.size, + (u8 *)op->kp.addr + op->optinsn.size); + + flush_icache_range((unsigned long) buf, + (unsigned long) buf + TMPL_END_IDX + + op->optinsn.size + RELATIVEJUMP_SIZE); + return 0; +} + +/* Replace a breakpoint (int3) with a relative jump. */ +int __kprobes arch_optimize_kprobe(struct optimized_kprobe *op) +{ + unsigned char jmp_code[RELATIVEJUMP_SIZE]; + s32 rel = (s32)((long)op->optinsn.insn - + ((long)op->kp.addr + RELATIVEJUMP_SIZE)); + + /* Backup instructions which will be replaced by jump address */ + memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE, + RELATIVE_ADDR_SIZE); + + jmp_code[0] = RELATIVEJUMP_OPCODE; + *(s32 *)(&jmp_code[1]) = rel; + + /* + * text_poke_smp doesn't support NMI/MCE code modifying. + * However, since kprobes itself also doesn't support NMI/MCE + * code probing, it's not a problem. + */ + text_poke_smp(op->kp.addr, jmp_code, RELATIVEJUMP_SIZE); + return 0; +} + +/* Replace a relative jump with a breakpoint (int3). */ +void __kprobes arch_unoptimize_kprobe(struct optimized_kprobe *op) +{ + u8 buf[RELATIVEJUMP_SIZE]; + + /* Set int3 to first byte for kprobes */ + buf[0] = BREAKPOINT_INSTRUCTION; + memcpy(buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE); + text_poke_smp(op->kp.addr, buf, RELATIVEJUMP_SIZE); +} + +static int __kprobes setup_detour_execution(struct kprobe *p, + struct pt_regs *regs, + int reenter) +{ + struct optimized_kprobe *op; + + if (p->flags & KPROBE_FLAG_OPTIMIZED) { + /* This kprobe is really able to run optimized path. */ + op = container_of(p, struct optimized_kprobe, kp); + /* Detour through copied instructions */ + regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX; + if (!reenter) + reset_current_kprobe(); + preempt_enable_no_resched(); + return 1; + } + return 0; +} +#endif + int __init arch_init_kprobes(void) { return 0; -- Masami Hiramatsu Software Engineer Hitachi Computer Products (America), Inc. Software Solutions Division e-mail: mhiramat@redhat.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/